CWE-693
Protection Mechanism Failure
The product does not use or incorrectly uses a protection mechanism that provides sufficient defense against directed attacks against the product.
CVE-2018-0244 (GCVE-0-2018-0244)
Vulnerability from cvelistv5 – Published: 2018-04-19 20:00 – Updated: 2024-11-29 15:16
VLAI
Summary
A vulnerability in the detection engine of Cisco Firepower System Software could allow an unauthenticated, remote attacker to bypass a configured file action policy to drop the Server Message Block (SMB) protocol if a malware file is detected. The vulnerability is due to how the SMB protocol handles a case in which a large file transfer fails. This case occurs when some pieces of the file are successfully transferred to the remote endpoint, but ultimately the file transfer fails and is reset. An attacker could exploit this vulnerability by sending a crafted SMB file transfer request through the targeted device. An exploit could allow the attacker to pass an SMB file that contains malware, which the device is configured to block. This vulnerability affects Cisco Firepower System Software when one or more file action policies are configured, on software releases prior to 6.2.3. Cisco Bug IDs: CSCvc20141.
Severity
No CVSS data available.
SSVC
Exploitation: none
Automatable: yes
Technical Impact: partial
CISA Coordinator (v2.0.3)
CWE
Assigner
References
2 references
| URL | Tags |
|---|---|
| http://www.securityfocus.com/bid/103945 | vdb-entryx_refsource_BID |
| https://tools.cisco.com/security/center/content/C… | x_refsource_CONFIRM |
Impacted products
1 product
| Vendor | Product | Version | |
|---|---|---|---|
| n/a | Cisco Firepower System Software |
Affected:
Cisco Firepower System Software
|
Date Public
2018-04-19 00:00
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2024-08-05T03:21:14.622Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"name": "103945",
"tags": [
"vdb-entry",
"x_refsource_BID",
"x_transferred"
],
"url": "http://www.securityfocus.com/bid/103945"
},
{
"tags": [
"x_refsource_CONFIRM",
"x_transferred"
],
"url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180418-fss1"
}
],
"title": "CVE Program Container"
},
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2018-0244",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2024-11-29T14:44:22.063651Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2024-11-29T15:16:29.378Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"product": "Cisco Firepower System Software",
"vendor": "n/a",
"versions": [
{
"status": "affected",
"version": "Cisco Firepower System Software"
}
]
}
],
"datePublic": "2018-04-19T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "A vulnerability in the detection engine of Cisco Firepower System Software could allow an unauthenticated, remote attacker to bypass a configured file action policy to drop the Server Message Block (SMB) protocol if a malware file is detected. The vulnerability is due to how the SMB protocol handles a case in which a large file transfer fails. This case occurs when some pieces of the file are successfully transferred to the remote endpoint, but ultimately the file transfer fails and is reset. An attacker could exploit this vulnerability by sending a crafted SMB file transfer request through the targeted device. An exploit could allow the attacker to pass an SMB file that contains malware, which the device is configured to block. This vulnerability affects Cisco Firepower System Software when one or more file action policies are configured, on software releases prior to 6.2.3. Cisco Bug IDs: CSCvc20141."
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-693",
"description": "CWE-693",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2018-04-24T09:57:01.000Z",
"orgId": "d1c1063e-7a18-46af-9102-31f8928bc633",
"shortName": "cisco"
},
"references": [
{
"name": "103945",
"tags": [
"vdb-entry",
"x_refsource_BID"
],
"url": "http://www.securityfocus.com/bid/103945"
},
{
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180418-fss1"
}
],
"x_legacyV4Record": {
"CVE_data_meta": {
"ASSIGNER": "psirt@cisco.com",
"ID": "CVE-2018-0244",
"STATE": "PUBLIC"
},
"affects": {
"vendor": {
"vendor_data": [
{
"product": {
"product_data": [
{
"product_name": "Cisco Firepower System Software",
"version": {
"version_data": [
{
"version_value": "Cisco Firepower System Software"
}
]
}
}
]
},
"vendor_name": "n/a"
}
]
}
},
"data_format": "MITRE",
"data_type": "CVE",
"data_version": "4.0",
"description": {
"description_data": [
{
"lang": "eng",
"value": "A vulnerability in the detection engine of Cisco Firepower System Software could allow an unauthenticated, remote attacker to bypass a configured file action policy to drop the Server Message Block (SMB) protocol if a malware file is detected. The vulnerability is due to how the SMB protocol handles a case in which a large file transfer fails. This case occurs when some pieces of the file are successfully transferred to the remote endpoint, but ultimately the file transfer fails and is reset. An attacker could exploit this vulnerability by sending a crafted SMB file transfer request through the targeted device. An exploit could allow the attacker to pass an SMB file that contains malware, which the device is configured to block. This vulnerability affects Cisco Firepower System Software when one or more file action policies are configured, on software releases prior to 6.2.3. Cisco Bug IDs: CSCvc20141."
}
]
},
"problemtype": {
"problemtype_data": [
{
"description": [
{
"lang": "eng",
"value": "CWE-693"
}
]
}
]
},
"references": {
"reference_data": [
{
"name": "103945",
"refsource": "BID",
"url": "http://www.securityfocus.com/bid/103945"
},
{
"name": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180418-fss1",
"refsource": "CONFIRM",
"url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180418-fss1"
}
]
}
}
}
},
"cveMetadata": {
"assignerOrgId": "d1c1063e-7a18-46af-9102-31f8928bc633",
"assignerShortName": "cisco",
"cveId": "CVE-2018-0244",
"datePublished": "2018-04-19T20:00:00.000Z",
"dateReserved": "2017-11-27T00:00:00.000Z",
"dateUpdated": "2024-11-29T15:16:29.378Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.1"
}
CVE-2018-0250 (GCVE-0-2018-0250)
Vulnerability from cvelistv5 – Published: 2018-05-02 22:00 – Updated: 2024-11-29 15:13
VLAI
Summary
A vulnerability in Central Web Authentication (CWA) with FlexConnect Access Points (APs) for Cisco Aironet 1560, 1810, 1810w, 1815, 1830, 1850, 2800, and 3800 Series APs could allow an authenticated, adjacent attacker to bypass a configured FlexConnect access control list (ACL). The vulnerability is due to the AP ignoring the ACL download from the client during authentication. An attacker could exploit this vulnerability by connecting to the targeted device with a vulnerable configuration. A successful exploit could allow the attacker to bypass a configured client FlexConnect ACL. This vulnerability affects the following Cisco products if they are running a vulnerable release of Central Web Authentication with FlexConnect Access Points Software: Aironet 1560 Series Access Points, Aironet 1810 Series OfficeExtend Access Points, Aironet 1810w Series Access Points, Aironet 1815 Series Access Points, Aironet 1830 Series Access Points, Aironet 1850 Series Access Points, Aironet 2800 Series Access Points, Aironet 3800 Series Access Points. Note: Central Web Authentication with FlexConnect Access Points was an unsupported configuration until 8.5.100.0. Cisco Bug IDs: CSCve17756.
Severity
No CVSS data available.
SSVC
Exploitation: none
Automatable: no
Technical Impact: partial
CISA Coordinator (v2.0.3)
CWE
Assigner
References
2 references
| URL | Tags |
|---|---|
| http://www.securitytracker.com/id/1040818 | vdb-entryx_refsource_SECTRACK |
| https://tools.cisco.com/security/center/content/C… | x_refsource_CONFIRM |
Impacted products
1 product
| Vendor | Product | Version | |
|---|---|---|---|
| n/a | Cisco Aironet Access Points |
Affected:
Cisco Aironet Access Points
|
Date Public
2018-05-02 00:00
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2024-08-05T03:21:14.402Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"name": "1040818",
"tags": [
"vdb-entry",
"x_refsource_SECTRACK",
"x_transferred"
],
"url": "http://www.securitytracker.com/id/1040818"
},
{
"tags": [
"x_refsource_CONFIRM",
"x_transferred"
],
"url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180502-ap-acl"
}
],
"title": "CVE Program Container"
},
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2018-0250",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2024-11-29T14:38:12.474869Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2024-11-29T15:13:00.370Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"product": "Cisco Aironet Access Points",
"vendor": "n/a",
"versions": [
{
"status": "affected",
"version": "Cisco Aironet Access Points"
}
]
}
],
"datePublic": "2018-05-02T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "A vulnerability in Central Web Authentication (CWA) with FlexConnect Access Points (APs) for Cisco Aironet 1560, 1810, 1810w, 1815, 1830, 1850, 2800, and 3800 Series APs could allow an authenticated, adjacent attacker to bypass a configured FlexConnect access control list (ACL). The vulnerability is due to the AP ignoring the ACL download from the client during authentication. An attacker could exploit this vulnerability by connecting to the targeted device with a vulnerable configuration. A successful exploit could allow the attacker to bypass a configured client FlexConnect ACL. This vulnerability affects the following Cisco products if they are running a vulnerable release of Central Web Authentication with FlexConnect Access Points Software: Aironet 1560 Series Access Points, Aironet 1810 Series OfficeExtend Access Points, Aironet 1810w Series Access Points, Aironet 1815 Series Access Points, Aironet 1830 Series Access Points, Aironet 1850 Series Access Points, Aironet 2800 Series Access Points, Aironet 3800 Series Access Points. Note: Central Web Authentication with FlexConnect Access Points was an unsupported configuration until 8.5.100.0. Cisco Bug IDs: CSCve17756."
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-693",
"description": "CWE-693",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2018-05-04T09:57:01.000Z",
"orgId": "d1c1063e-7a18-46af-9102-31f8928bc633",
"shortName": "cisco"
},
"references": [
{
"name": "1040818",
"tags": [
"vdb-entry",
"x_refsource_SECTRACK"
],
"url": "http://www.securitytracker.com/id/1040818"
},
{
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180502-ap-acl"
}
],
"x_legacyV4Record": {
"CVE_data_meta": {
"ASSIGNER": "psirt@cisco.com",
"ID": "CVE-2018-0250",
"STATE": "PUBLIC"
},
"affects": {
"vendor": {
"vendor_data": [
{
"product": {
"product_data": [
{
"product_name": "Cisco Aironet Access Points",
"version": {
"version_data": [
{
"version_value": "Cisco Aironet Access Points"
}
]
}
}
]
},
"vendor_name": "n/a"
}
]
}
},
"data_format": "MITRE",
"data_type": "CVE",
"data_version": "4.0",
"description": {
"description_data": [
{
"lang": "eng",
"value": "A vulnerability in Central Web Authentication (CWA) with FlexConnect Access Points (APs) for Cisco Aironet 1560, 1810, 1810w, 1815, 1830, 1850, 2800, and 3800 Series APs could allow an authenticated, adjacent attacker to bypass a configured FlexConnect access control list (ACL). The vulnerability is due to the AP ignoring the ACL download from the client during authentication. An attacker could exploit this vulnerability by connecting to the targeted device with a vulnerable configuration. A successful exploit could allow the attacker to bypass a configured client FlexConnect ACL. This vulnerability affects the following Cisco products if they are running a vulnerable release of Central Web Authentication with FlexConnect Access Points Software: Aironet 1560 Series Access Points, Aironet 1810 Series OfficeExtend Access Points, Aironet 1810w Series Access Points, Aironet 1815 Series Access Points, Aironet 1830 Series Access Points, Aironet 1850 Series Access Points, Aironet 2800 Series Access Points, Aironet 3800 Series Access Points. Note: Central Web Authentication with FlexConnect Access Points was an unsupported configuration until 8.5.100.0. Cisco Bug IDs: CSCve17756."
}
]
},
"problemtype": {
"problemtype_data": [
{
"description": [
{
"lang": "eng",
"value": "CWE-693"
}
]
}
]
},
"references": {
"reference_data": [
{
"name": "1040818",
"refsource": "SECTRACK",
"url": "http://www.securitytracker.com/id/1040818"
},
{
"name": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180502-ap-acl",
"refsource": "CONFIRM",
"url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180502-ap-acl"
}
]
}
}
}
},
"cveMetadata": {
"assignerOrgId": "d1c1063e-7a18-46af-9102-31f8928bc633",
"assignerShortName": "cisco",
"cveId": "CVE-2018-0250",
"datePublished": "2018-05-02T22:00:00.000Z",
"dateReserved": "2017-11-27T00:00:00.000Z",
"dateUpdated": "2024-11-29T15:13:00.370Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.1"
}
CVE-2018-0254 (GCVE-0-2018-0254)
Vulnerability from cvelistv5 – Published: 2018-04-19 20:00 – Updated: 2024-11-29 15:16
VLAI
Summary
A vulnerability in the detection engine of Cisco Firepower System Software could allow an unauthenticated, remote attacker to bypass configured file action policies if an Intelligent Application Bypass (IAB) with a drop percentage threshold is also configured. The vulnerability is due to incorrect counting of the percentage of dropped traffic. An attacker could exploit this vulnerability by sending network traffic to a targeted device. An exploit could allow the attacker to bypass configured file action policies, and traffic that should be dropped could be allowed into the network. Cisco Bug IDs: CSCvf86435.
Severity
No CVSS data available.
SSVC
Exploitation: none
Automatable: yes
Technical Impact: partial
CISA Coordinator (v2.0.3)
CWE
Assigner
References
2 references
| URL | Tags |
|---|---|
| https://tools.cisco.com/security/center/content/C… | x_refsource_CONFIRM |
| http://www.securityfocus.com/bid/103940 | vdb-entryx_refsource_BID |
Impacted products
1 product
| Vendor | Product | Version | |
|---|---|---|---|
| n/a | Cisco Firepower System Software |
Affected:
Cisco Firepower System Software
|
Date Public
2018-04-19 00:00
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2024-08-05T03:21:14.430Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"tags": [
"x_refsource_CONFIRM",
"x_transferred"
],
"url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180418-fss2"
},
{
"name": "103940",
"tags": [
"vdb-entry",
"x_refsource_BID",
"x_transferred"
],
"url": "http://www.securityfocus.com/bid/103940"
}
],
"title": "CVE Program Container"
},
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2018-0254",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2024-11-29T14:44:20.614528Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2024-11-29T15:16:11.647Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"product": "Cisco Firepower System Software",
"vendor": "n/a",
"versions": [
{
"status": "affected",
"version": "Cisco Firepower System Software"
}
]
}
],
"datePublic": "2018-04-19T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "A vulnerability in the detection engine of Cisco Firepower System Software could allow an unauthenticated, remote attacker to bypass configured file action policies if an Intelligent Application Bypass (IAB) with a drop percentage threshold is also configured. The vulnerability is due to incorrect counting of the percentage of dropped traffic. An attacker could exploit this vulnerability by sending network traffic to a targeted device. An exploit could allow the attacker to bypass configured file action policies, and traffic that should be dropped could be allowed into the network. Cisco Bug IDs: CSCvf86435."
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-693",
"description": "CWE-693",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2018-04-24T09:57:01.000Z",
"orgId": "d1c1063e-7a18-46af-9102-31f8928bc633",
"shortName": "cisco"
},
"references": [
{
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180418-fss2"
},
{
"name": "103940",
"tags": [
"vdb-entry",
"x_refsource_BID"
],
"url": "http://www.securityfocus.com/bid/103940"
}
],
"x_legacyV4Record": {
"CVE_data_meta": {
"ASSIGNER": "psirt@cisco.com",
"ID": "CVE-2018-0254",
"STATE": "PUBLIC"
},
"affects": {
"vendor": {
"vendor_data": [
{
"product": {
"product_data": [
{
"product_name": "Cisco Firepower System Software",
"version": {
"version_data": [
{
"version_value": "Cisco Firepower System Software"
}
]
}
}
]
},
"vendor_name": "n/a"
}
]
}
},
"data_format": "MITRE",
"data_type": "CVE",
"data_version": "4.0",
"description": {
"description_data": [
{
"lang": "eng",
"value": "A vulnerability in the detection engine of Cisco Firepower System Software could allow an unauthenticated, remote attacker to bypass configured file action policies if an Intelligent Application Bypass (IAB) with a drop percentage threshold is also configured. The vulnerability is due to incorrect counting of the percentage of dropped traffic. An attacker could exploit this vulnerability by sending network traffic to a targeted device. An exploit could allow the attacker to bypass configured file action policies, and traffic that should be dropped could be allowed into the network. Cisco Bug IDs: CSCvf86435."
}
]
},
"problemtype": {
"problemtype_data": [
{
"description": [
{
"lang": "eng",
"value": "CWE-693"
}
]
}
]
},
"references": {
"reference_data": [
{
"name": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180418-fss2",
"refsource": "CONFIRM",
"url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180418-fss2"
},
{
"name": "103940",
"refsource": "BID",
"url": "http://www.securityfocus.com/bid/103940"
}
]
}
}
}
},
"cveMetadata": {
"assignerOrgId": "d1c1063e-7a18-46af-9102-31f8928bc633",
"assignerShortName": "cisco",
"cveId": "CVE-2018-0254",
"datePublished": "2018-04-19T20:00:00.000Z",
"dateReserved": "2017-11-27T00:00:00.000Z",
"dateUpdated": "2024-11-29T15:16:11.647Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.1"
}
CVE-2018-0297 (GCVE-0-2018-0297)
Vulnerability from cvelistv5 – Published: 2018-05-17 03:00 – Updated: 2024-11-29 15:08
VLAI
Summary
A vulnerability in the detection engine of Cisco Firepower Threat Defense software could allow an unauthenticated, remote attacker to bypass a configured Secure Sockets Layer (SSL) Access Control (AC) policy to block SSL traffic. The vulnerability is due to the incorrect handling of TCP SSL packets received out of order. An attacker could exploit this vulnerability by sending a crafted SSL connection through the affected device. A successful exploit could allow the attacker to bypass a configured SSL AC policy to block SSL traffic. Cisco Bug IDs: CSCvg09316.
Severity
No CVSS data available.
SSVC
Exploitation: none
Automatable: yes
Technical Impact: partial
CISA Coordinator (v2.0.3)
CWE
Assigner
References
2 references
| URL | Tags |
|---|---|
| https://tools.cisco.com/security/center/content/C… | x_refsource_CONFIRM |
| http://www.securityfocus.com/bid/104197 | vdb-entryx_refsource_BID |
Impacted products
1 product
| Vendor | Product | Version | |
|---|---|---|---|
| n/a | Cisco Firepower Threat Defense Software |
Affected:
Cisco Firepower Threat Defense Software
|
Date Public
2018-05-16 00:00
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2024-08-05T03:21:15.256Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"tags": [
"x_refsource_CONFIRM",
"x_transferred"
],
"url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180516-firepwr-pb"
},
{
"name": "104197",
"tags": [
"vdb-entry",
"x_refsource_BID",
"x_transferred"
],
"url": "http://www.securityfocus.com/bid/104197"
}
],
"title": "CVE Program Container"
},
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2018-0297",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2024-11-29T14:43:56.407325Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2024-11-29T15:08:58.703Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"product": "Cisco Firepower Threat Defense Software",
"vendor": "n/a",
"versions": [
{
"status": "affected",
"version": "Cisco Firepower Threat Defense Software"
}
]
}
],
"datePublic": "2018-05-16T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "A vulnerability in the detection engine of Cisco Firepower Threat Defense software could allow an unauthenticated, remote attacker to bypass a configured Secure Sockets Layer (SSL) Access Control (AC) policy to block SSL traffic. The vulnerability is due to the incorrect handling of TCP SSL packets received out of order. An attacker could exploit this vulnerability by sending a crafted SSL connection through the affected device. A successful exploit could allow the attacker to bypass a configured SSL AC policy to block SSL traffic. Cisco Bug IDs: CSCvg09316."
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-693",
"description": "CWE-693",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2018-05-19T09:57:01.000Z",
"orgId": "d1c1063e-7a18-46af-9102-31f8928bc633",
"shortName": "cisco"
},
"references": [
{
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180516-firepwr-pb"
},
{
"name": "104197",
"tags": [
"vdb-entry",
"x_refsource_BID"
],
"url": "http://www.securityfocus.com/bid/104197"
}
],
"x_legacyV4Record": {
"CVE_data_meta": {
"ASSIGNER": "psirt@cisco.com",
"ID": "CVE-2018-0297",
"STATE": "PUBLIC"
},
"affects": {
"vendor": {
"vendor_data": [
{
"product": {
"product_data": [
{
"product_name": "Cisco Firepower Threat Defense Software",
"version": {
"version_data": [
{
"version_value": "Cisco Firepower Threat Defense Software"
}
]
}
}
]
},
"vendor_name": "n/a"
}
]
}
},
"data_format": "MITRE",
"data_type": "CVE",
"data_version": "4.0",
"description": {
"description_data": [
{
"lang": "eng",
"value": "A vulnerability in the detection engine of Cisco Firepower Threat Defense software could allow an unauthenticated, remote attacker to bypass a configured Secure Sockets Layer (SSL) Access Control (AC) policy to block SSL traffic. The vulnerability is due to the incorrect handling of TCP SSL packets received out of order. An attacker could exploit this vulnerability by sending a crafted SSL connection through the affected device. A successful exploit could allow the attacker to bypass a configured SSL AC policy to block SSL traffic. Cisco Bug IDs: CSCvg09316."
}
]
},
"problemtype": {
"problemtype_data": [
{
"description": [
{
"lang": "eng",
"value": "CWE-693"
}
]
}
]
},
"references": {
"reference_data": [
{
"name": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180516-firepwr-pb",
"refsource": "CONFIRM",
"url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180516-firepwr-pb"
},
{
"name": "104197",
"refsource": "BID",
"url": "http://www.securityfocus.com/bid/104197"
}
]
}
}
}
},
"cveMetadata": {
"assignerOrgId": "d1c1063e-7a18-46af-9102-31f8928bc633",
"assignerShortName": "cisco",
"cveId": "CVE-2018-0297",
"datePublished": "2018-05-17T03:00:00.000Z",
"dateReserved": "2017-11-27T00:00:00.000Z",
"dateUpdated": "2024-11-29T15:08:58.703Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.1"
}
CVE-2018-0326 (GCVE-0-2018-0326)
Vulnerability from cvelistv5 – Published: 2018-05-17 03:00 – Updated: 2024-11-29 15:07
VLAI
Summary
A vulnerability in the web UI of Cisco TelePresence Server Software could allow an unauthenticated, remote attacker to conduct a cross-frame scripting (XFS) attack against a user of the web UI of the affected software. The vulnerability is due to insufficient protections for HTML inline frames (iframes) by the web UI of the affected software. An attacker could exploit this vulnerability by persuading a user of the affected UI to navigate to an attacker-controlled web page that contains a malicious HTML iframe. A successful exploit could allow the attacker to conduct click-jacking or other client-side browser attacks on the affected system. Cisco Bug IDs: CSCun79565.
Severity
No CVSS data available.
SSVC
Exploitation: none
Automatable: no
Technical Impact: partial
CISA Coordinator (v2.0.3)
CWE
Assigner
References
3 references
| URL | Tags |
|---|---|
| http://www.securityfocus.com/bid/104204 | vdb-entryx_refsource_BID |
| https://tools.cisco.com/security/center/content/C… | x_refsource_CONFIRM |
| http://www.securitytracker.com/id/1040930 | vdb-entryx_refsource_SECTRACK |
Impacted products
1 product
| Vendor | Product | Version | |
|---|---|---|---|
| n/a | Cisco TelePresence Server |
Affected:
Cisco TelePresence Server
|
Date Public
2018-05-16 00:00
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2024-08-05T03:21:15.286Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"name": "104204",
"tags": [
"vdb-entry",
"x_refsource_BID",
"x_transferred"
],
"url": "http://www.securityfocus.com/bid/104204"
},
{
"tags": [
"x_refsource_CONFIRM",
"x_transferred"
],
"url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180516-telepres-xfs"
},
{
"name": "1040930",
"tags": [
"vdb-entry",
"x_refsource_SECTRACK",
"x_transferred"
],
"url": "http://www.securitytracker.com/id/1040930"
}
],
"title": "CVE Program Container"
},
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2018-0326",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2024-11-29T14:38:04.881106Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2024-11-29T15:07:55.958Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"product": "Cisco TelePresence Server",
"vendor": "n/a",
"versions": [
{
"status": "affected",
"version": "Cisco TelePresence Server"
}
]
}
],
"datePublic": "2018-05-16T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "A vulnerability in the web UI of Cisco TelePresence Server Software could allow an unauthenticated, remote attacker to conduct a cross-frame scripting (XFS) attack against a user of the web UI of the affected software. The vulnerability is due to insufficient protections for HTML inline frames (iframes) by the web UI of the affected software. An attacker could exploit this vulnerability by persuading a user of the affected UI to navigate to an attacker-controlled web page that contains a malicious HTML iframe. A successful exploit could allow the attacker to conduct click-jacking or other client-side browser attacks on the affected system. Cisco Bug IDs: CSCun79565."
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-693",
"description": "CWE-693",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2018-05-19T09:57:01.000Z",
"orgId": "d1c1063e-7a18-46af-9102-31f8928bc633",
"shortName": "cisco"
},
"references": [
{
"name": "104204",
"tags": [
"vdb-entry",
"x_refsource_BID"
],
"url": "http://www.securityfocus.com/bid/104204"
},
{
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180516-telepres-xfs"
},
{
"name": "1040930",
"tags": [
"vdb-entry",
"x_refsource_SECTRACK"
],
"url": "http://www.securitytracker.com/id/1040930"
}
],
"x_legacyV4Record": {
"CVE_data_meta": {
"ASSIGNER": "psirt@cisco.com",
"ID": "CVE-2018-0326",
"STATE": "PUBLIC"
},
"affects": {
"vendor": {
"vendor_data": [
{
"product": {
"product_data": [
{
"product_name": "Cisco TelePresence Server",
"version": {
"version_data": [
{
"version_value": "Cisco TelePresence Server"
}
]
}
}
]
},
"vendor_name": "n/a"
}
]
}
},
"data_format": "MITRE",
"data_type": "CVE",
"data_version": "4.0",
"description": {
"description_data": [
{
"lang": "eng",
"value": "A vulnerability in the web UI of Cisco TelePresence Server Software could allow an unauthenticated, remote attacker to conduct a cross-frame scripting (XFS) attack against a user of the web UI of the affected software. The vulnerability is due to insufficient protections for HTML inline frames (iframes) by the web UI of the affected software. An attacker could exploit this vulnerability by persuading a user of the affected UI to navigate to an attacker-controlled web page that contains a malicious HTML iframe. A successful exploit could allow the attacker to conduct click-jacking or other client-side browser attacks on the affected system. Cisco Bug IDs: CSCun79565."
}
]
},
"problemtype": {
"problemtype_data": [
{
"description": [
{
"lang": "eng",
"value": "CWE-693"
}
]
}
]
},
"references": {
"reference_data": [
{
"name": "104204",
"refsource": "BID",
"url": "http://www.securityfocus.com/bid/104204"
},
{
"name": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180516-telepres-xfs",
"refsource": "CONFIRM",
"url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180516-telepres-xfs"
},
{
"name": "1040930",
"refsource": "SECTRACK",
"url": "http://www.securitytracker.com/id/1040930"
}
]
}
}
}
},
"cveMetadata": {
"assignerOrgId": "d1c1063e-7a18-46af-9102-31f8928bc633",
"assignerShortName": "cisco",
"cveId": "CVE-2018-0326",
"datePublished": "2018-05-17T03:00:00.000Z",
"dateReserved": "2017-11-27T00:00:00.000Z",
"dateUpdated": "2024-11-29T15:07:55.958Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.1"
}
CVE-2018-0333 (GCVE-0-2018-0333)
Vulnerability from cvelistv5 – Published: 2018-06-07 21:00 – Updated: 2024-11-29 15:04
VLAI
Summary
A vulnerability in the VPN configuration management of Cisco FireSIGHT System Software could allow an unauthenticated, remote attacker to bypass VPN security due to unintended side effects of dynamic configuration changes that could allow an attacker to bypass configured policies. The vulnerability is due to incorrect management of the configured interface names and VPN parameters when dynamic CLI configuration changes are performed. An attacker could exploit this vulnerability by sending packets through an interface on the targeted device. A successful exploit could allow the attacker to bypass configured VPN policies. Cisco Bug IDs: CSCvh49388.
Severity
No CVSS data available.
SSVC
Exploitation: none
Automatable: yes
Technical Impact: partial
CISA Coordinator (v2.0.3)
CWE
Assigner
References
2 references
| URL | Tags |
|---|---|
| http://www.securityfocus.com/bid/104422 | vdb-entryx_refsource_BID |
| https://tools.cisco.com/security/center/content/C… | x_refsource_CONFIRM |
Impacted products
1 product
| Vendor | Product | Version | |
|---|---|---|---|
| n/a | Cisco FireSIGHT unknown |
Affected:
Cisco FireSIGHT unknown
|
Date Public
2018-06-07 00:00
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2024-08-05T03:21:15.417Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"name": "104422",
"tags": [
"vdb-entry",
"x_refsource_BID",
"x_transferred"
],
"url": "http://www.securityfocus.com/bid/104422"
},
{
"tags": [
"x_refsource_CONFIRM",
"x_transferred"
],
"url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180606-FireSIGHT-vpn-bypass"
}
],
"title": "CVE Program Container"
},
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2018-0333",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2024-11-29T14:43:45.238893Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2024-11-29T15:04:50.878Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"product": "Cisco FireSIGHT unknown",
"vendor": "n/a",
"versions": [
{
"status": "affected",
"version": "Cisco FireSIGHT unknown"
}
]
}
],
"datePublic": "2018-06-07T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "A vulnerability in the VPN configuration management of Cisco FireSIGHT System Software could allow an unauthenticated, remote attacker to bypass VPN security due to unintended side effects of dynamic configuration changes that could allow an attacker to bypass configured policies. The vulnerability is due to incorrect management of the configured interface names and VPN parameters when dynamic CLI configuration changes are performed. An attacker could exploit this vulnerability by sending packets through an interface on the targeted device. A successful exploit could allow the attacker to bypass configured VPN policies. Cisco Bug IDs: CSCvh49388."
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-693",
"description": "CWE-693",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2018-06-09T09:57:02.000Z",
"orgId": "d1c1063e-7a18-46af-9102-31f8928bc633",
"shortName": "cisco"
},
"references": [
{
"name": "104422",
"tags": [
"vdb-entry",
"x_refsource_BID"
],
"url": "http://www.securityfocus.com/bid/104422"
},
{
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180606-FireSIGHT-vpn-bypass"
}
],
"x_legacyV4Record": {
"CVE_data_meta": {
"ASSIGNER": "psirt@cisco.com",
"ID": "CVE-2018-0333",
"STATE": "PUBLIC"
},
"affects": {
"vendor": {
"vendor_data": [
{
"product": {
"product_data": [
{
"product_name": "Cisco FireSIGHT unknown",
"version": {
"version_data": [
{
"version_value": "Cisco FireSIGHT unknown"
}
]
}
}
]
},
"vendor_name": "n/a"
}
]
}
},
"data_format": "MITRE",
"data_type": "CVE",
"data_version": "4.0",
"description": {
"description_data": [
{
"lang": "eng",
"value": "A vulnerability in the VPN configuration management of Cisco FireSIGHT System Software could allow an unauthenticated, remote attacker to bypass VPN security due to unintended side effects of dynamic configuration changes that could allow an attacker to bypass configured policies. The vulnerability is due to incorrect management of the configured interface names and VPN parameters when dynamic CLI configuration changes are performed. An attacker could exploit this vulnerability by sending packets through an interface on the targeted device. A successful exploit could allow the attacker to bypass configured VPN policies. Cisco Bug IDs: CSCvh49388."
}
]
},
"problemtype": {
"problemtype_data": [
{
"description": [
{
"lang": "eng",
"value": "CWE-693"
}
]
}
]
},
"references": {
"reference_data": [
{
"name": "104422",
"refsource": "BID",
"url": "http://www.securityfocus.com/bid/104422"
},
{
"name": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180606-FireSIGHT-vpn-bypass",
"refsource": "CONFIRM",
"url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180606-FireSIGHT-vpn-bypass"
}
]
}
}
}
},
"cveMetadata": {
"assignerOrgId": "d1c1063e-7a18-46af-9102-31f8928bc633",
"assignerShortName": "cisco",
"cveId": "CVE-2018-0333",
"datePublished": "2018-06-07T21:00:00.000Z",
"dateReserved": "2017-11-27T00:00:00.000Z",
"dateUpdated": "2024-11-29T15:04:50.878Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.1"
}
CVE-2018-0383 (GCVE-0-2018-0383)
Vulnerability from cvelistv5 – Published: 2018-07-16 17:00 – Updated: 2024-11-29 14:54
VLAI
Summary
A vulnerability in the detection engine of Cisco FireSIGHT System Software could allow an unauthenticated, remote attacker to bypass a file policy that is configured to block the transfer of files to an affected system via FTP. The vulnerability exists because the affected software incorrectly handles FTP control connections. An attacker could exploit this vulnerability by sending a maliciously crafted FTP connection to transfer a file to an affected device. A successful exploit could allow the attacker to bypass a file policy that is configured to apply the Block upload with reset action to FTP traffic. Cisco Bug IDs: CSCvh70130.
Severity
No CVSS data available.
SSVC
Exploitation: none
Automatable: yes
Technical Impact: partial
CISA Coordinator (v2.0.3)
CWE
Assigner
References
3 references
| URL | Tags |
|---|---|
| https://tools.cisco.com/security/center/content/C… | x_refsource_CONFIRM |
| http://www.securitytracker.com/id/1041283 | vdb-entryx_refsource_SECTRACK |
| http://www.securityfocus.com/bid/104726 | vdb-entryx_refsource_BID |
Impacted products
1 product
| Vendor | Product | Version | |
|---|---|---|---|
| n/a | Cisco FireSIGHT unknown |
Affected:
Cisco FireSIGHT unknown
|
Date Public
2018-07-16 00:00
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2024-08-05T03:21:15.620Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"tags": [
"x_refsource_CONFIRM",
"x_transferred"
],
"url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180711-firesight-file-bypass"
},
{
"name": "1041283",
"tags": [
"vdb-entry",
"x_refsource_SECTRACK",
"x_transferred"
],
"url": "http://www.securitytracker.com/id/1041283"
},
{
"name": "104726",
"tags": [
"vdb-entry",
"x_refsource_BID",
"x_transferred"
],
"url": "http://www.securityfocus.com/bid/104726"
}
],
"title": "CVE Program Container"
},
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2018-0383",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2024-11-29T14:43:33.327817Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2024-11-29T14:54:17.538Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"product": "Cisco FireSIGHT unknown",
"vendor": "n/a",
"versions": [
{
"status": "affected",
"version": "Cisco FireSIGHT unknown"
}
]
}
],
"datePublic": "2018-07-16T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "A vulnerability in the detection engine of Cisco FireSIGHT System Software could allow an unauthenticated, remote attacker to bypass a file policy that is configured to block the transfer of files to an affected system via FTP. The vulnerability exists because the affected software incorrectly handles FTP control connections. An attacker could exploit this vulnerability by sending a maliciously crafted FTP connection to transfer a file to an affected device. A successful exploit could allow the attacker to bypass a file policy that is configured to apply the Block upload with reset action to FTP traffic. Cisco Bug IDs: CSCvh70130."
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-693",
"description": "CWE-693",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2018-07-17T09:57:01.000Z",
"orgId": "d1c1063e-7a18-46af-9102-31f8928bc633",
"shortName": "cisco"
},
"references": [
{
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180711-firesight-file-bypass"
},
{
"name": "1041283",
"tags": [
"vdb-entry",
"x_refsource_SECTRACK"
],
"url": "http://www.securitytracker.com/id/1041283"
},
{
"name": "104726",
"tags": [
"vdb-entry",
"x_refsource_BID"
],
"url": "http://www.securityfocus.com/bid/104726"
}
],
"x_legacyV4Record": {
"CVE_data_meta": {
"ASSIGNER": "psirt@cisco.com",
"ID": "CVE-2018-0383",
"STATE": "PUBLIC"
},
"affects": {
"vendor": {
"vendor_data": [
{
"product": {
"product_data": [
{
"product_name": "Cisco FireSIGHT unknown",
"version": {
"version_data": [
{
"version_value": "Cisco FireSIGHT unknown"
}
]
}
}
]
},
"vendor_name": "n/a"
}
]
}
},
"data_format": "MITRE",
"data_type": "CVE",
"data_version": "4.0",
"description": {
"description_data": [
{
"lang": "eng",
"value": "A vulnerability in the detection engine of Cisco FireSIGHT System Software could allow an unauthenticated, remote attacker to bypass a file policy that is configured to block the transfer of files to an affected system via FTP. The vulnerability exists because the affected software incorrectly handles FTP control connections. An attacker could exploit this vulnerability by sending a maliciously crafted FTP connection to transfer a file to an affected device. A successful exploit could allow the attacker to bypass a file policy that is configured to apply the Block upload with reset action to FTP traffic. Cisco Bug IDs: CSCvh70130."
}
]
},
"problemtype": {
"problemtype_data": [
{
"description": [
{
"lang": "eng",
"value": "CWE-693"
}
]
}
]
},
"references": {
"reference_data": [
{
"name": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180711-firesight-file-bypass",
"refsource": "CONFIRM",
"url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180711-firesight-file-bypass"
},
{
"name": "1041283",
"refsource": "SECTRACK",
"url": "http://www.securitytracker.com/id/1041283"
},
{
"name": "104726",
"refsource": "BID",
"url": "http://www.securityfocus.com/bid/104726"
}
]
}
}
}
},
"cveMetadata": {
"assignerOrgId": "d1c1063e-7a18-46af-9102-31f8928bc633",
"assignerShortName": "cisco",
"cveId": "CVE-2018-0383",
"datePublished": "2018-07-16T17:00:00.000Z",
"dateReserved": "2017-11-27T00:00:00.000Z",
"dateUpdated": "2024-11-29T14:54:17.538Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.1"
}
CVE-2018-0384 (GCVE-0-2018-0384)
Vulnerability from cvelistv5 – Published: 2018-07-16 17:00 – Updated: 2024-11-29 14:54
VLAI
Summary
A vulnerability in the detection engine of Cisco FireSIGHT System Software could allow an unauthenticated, remote attacker to bypass a URL-based access control policy that is configured to block traffic for an affected system. The vulnerability exists because the affected software incorrectly handles TCP packets that are received out of order when a TCP SYN retransmission is issued. An attacker could exploit this vulnerability by sending a maliciously crafted connection through an affected device. A successful exploit could allow the attacker to bypass a URL-based access control policy that is configured to block traffic for the affected system. Cisco Bug IDs: CSCvh84511.
Severity
No CVSS data available.
SSVC
Exploitation: none
Automatable: yes
Technical Impact: partial
CISA Coordinator (v2.0.3)
CWE
Assigner
References
3 references
| URL | Tags |
|---|---|
| http://www.securityfocus.com/bid/104725 | vdb-entryx_refsource_BID |
| https://tools.cisco.com/security/center/content/C… | x_refsource_CONFIRM |
| http://www.securitytracker.com/id/1041284 | vdb-entryx_refsource_SECTRACK |
Impacted products
1 product
| Vendor | Product | Version | |
|---|---|---|---|
| n/a | Cisco FireSIGHT unknown |
Affected:
Cisco FireSIGHT unknown
|
Date Public
2018-07-16 00:00
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2024-08-05T03:21:15.600Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"name": "104725",
"tags": [
"vdb-entry",
"x_refsource_BID",
"x_transferred"
],
"url": "http://www.securityfocus.com/bid/104725"
},
{
"tags": [
"x_refsource_CONFIRM",
"x_transferred"
],
"url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180711-firesight-url-bypass"
},
{
"name": "1041284",
"tags": [
"vdb-entry",
"x_refsource_SECTRACK",
"x_transferred"
],
"url": "http://www.securitytracker.com/id/1041284"
}
],
"title": "CVE Program Container"
},
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2018-0384",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2024-11-29T14:43:32.135812Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2024-11-29T14:54:07.228Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"product": "Cisco FireSIGHT unknown",
"vendor": "n/a",
"versions": [
{
"status": "affected",
"version": "Cisco FireSIGHT unknown"
}
]
}
],
"datePublic": "2018-07-16T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "A vulnerability in the detection engine of Cisco FireSIGHT System Software could allow an unauthenticated, remote attacker to bypass a URL-based access control policy that is configured to block traffic for an affected system. The vulnerability exists because the affected software incorrectly handles TCP packets that are received out of order when a TCP SYN retransmission is issued. An attacker could exploit this vulnerability by sending a maliciously crafted connection through an affected device. A successful exploit could allow the attacker to bypass a URL-based access control policy that is configured to block traffic for the affected system. Cisco Bug IDs: CSCvh84511."
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-693",
"description": "CWE-693",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2018-07-17T09:57:01.000Z",
"orgId": "d1c1063e-7a18-46af-9102-31f8928bc633",
"shortName": "cisco"
},
"references": [
{
"name": "104725",
"tags": [
"vdb-entry",
"x_refsource_BID"
],
"url": "http://www.securityfocus.com/bid/104725"
},
{
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180711-firesight-url-bypass"
},
{
"name": "1041284",
"tags": [
"vdb-entry",
"x_refsource_SECTRACK"
],
"url": "http://www.securitytracker.com/id/1041284"
}
],
"x_legacyV4Record": {
"CVE_data_meta": {
"ASSIGNER": "psirt@cisco.com",
"ID": "CVE-2018-0384",
"STATE": "PUBLIC"
},
"affects": {
"vendor": {
"vendor_data": [
{
"product": {
"product_data": [
{
"product_name": "Cisco FireSIGHT unknown",
"version": {
"version_data": [
{
"version_value": "Cisco FireSIGHT unknown"
}
]
}
}
]
},
"vendor_name": "n/a"
}
]
}
},
"data_format": "MITRE",
"data_type": "CVE",
"data_version": "4.0",
"description": {
"description_data": [
{
"lang": "eng",
"value": "A vulnerability in the detection engine of Cisco FireSIGHT System Software could allow an unauthenticated, remote attacker to bypass a URL-based access control policy that is configured to block traffic for an affected system. The vulnerability exists because the affected software incorrectly handles TCP packets that are received out of order when a TCP SYN retransmission is issued. An attacker could exploit this vulnerability by sending a maliciously crafted connection through an affected device. A successful exploit could allow the attacker to bypass a URL-based access control policy that is configured to block traffic for the affected system. Cisco Bug IDs: CSCvh84511."
}
]
},
"problemtype": {
"problemtype_data": [
{
"description": [
{
"lang": "eng",
"value": "CWE-693"
}
]
}
]
},
"references": {
"reference_data": [
{
"name": "104725",
"refsource": "BID",
"url": "http://www.securityfocus.com/bid/104725"
},
{
"name": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180711-firesight-url-bypass",
"refsource": "CONFIRM",
"url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180711-firesight-url-bypass"
},
{
"name": "1041284",
"refsource": "SECTRACK",
"url": "http://www.securitytracker.com/id/1041284"
}
]
}
}
}
},
"cveMetadata": {
"assignerOrgId": "d1c1063e-7a18-46af-9102-31f8928bc633",
"assignerShortName": "cisco",
"cveId": "CVE-2018-0384",
"datePublished": "2018-07-16T17:00:00.000Z",
"dateReserved": "2017-11-27T00:00:00.000Z",
"dateUpdated": "2024-11-29T14:54:07.228Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.1"
}
CVE-2018-10631 (GCVE-0-2018-10631)
Vulnerability from cvelistv5 – Published: 2018-07-13 19:00 – Updated: 2025-08-26 14:26
VLAI
Title
Medtronic N'Vision Clinician Programmer Protection Mechanism Failure
Summary
The 8840 Clinician Programmer executes the application program from the 8870 Application Card. An attacker with physical access to an 8870 Application Card and sufficient technical capability can modify the contents of this card, including the binary executables. If modified to bypass protection mechanisms, this malicious code will be run when the card is inserted into an 8840 Clinician Programmer.
Severity
6.3 (Medium)
SSVC
Exploitation: none
Automatable: no
Technical Impact: total
CISA Coordinator (v2.0.3)
CWE
Assigner
References
Impacted products
3 products
| Vendor | Product | Version | |
|---|---|---|---|
| Medtronic | 8840 N’Vision Clinician Programmer |
Affected:
All versions
|
|
| Medtronic | 8870 N’Vision removable Application Card |
Affected:
All versions
|
|
| ics_cert | medtronic_n_vision_clinician_programmer |
Affected:
8840_n_vision_clinician_programmer , ≤ *
(custom)
Affected: 8870_n_vision_removable_application_card cpe:2.3:a:ics_cert:medtronic_n_vision_clinician_programmer:*:*:*:*:*:*:*:* |
Credits
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2024-08-05T07:46:46.502Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"tags": [
"x_refsource_MISC",
"x_transferred"
],
"url": "https://ics-cert.us-cert.gov/advisories/ICSMA-18-137-01"
},
{
"tags": [
"x_refsource_MISC",
"x_transferred"
],
"url": "https://www.medtronic.com/security"
}
],
"title": "CVE Program Container"
},
{
"affected": [
{
"cpes": [
"cpe:2.3:a:ics_cert:medtronic_n_vision_clinician_programmer:*:*:*:*:*:*:*:*"
],
"defaultStatus": "unknown",
"product": "medtronic_n_vision_clinician_programmer",
"vendor": "ics_cert",
"versions": [
{
"lessThanOrEqual": "*",
"status": "affected",
"version": "8840_n_vision_clinician_programmer",
"versionType": "custom"
},
{
"status": "affected",
"version": "8870_n_vision_removable_application_card"
}
]
}
],
"metrics": [
{
"other": {
"content": {
"id": "CVE-2018-10631",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2024-08-19T18:07:51.945413Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2025-08-26T14:26:52.840Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "8840 N\u2019Vision Clinician Programmer",
"vendor": "Medtronic",
"versions": [
{
"status": "affected",
"version": "All versions"
}
]
},
{
"defaultStatus": "unaffected",
"product": "8870 N\u2019Vision removable Application Card",
"vendor": "Medtronic",
"versions": [
{
"status": "affected",
"version": "All versions"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Billy Rios and Jonathan Butts of Whitescope LLC reported this vulnerability"
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "The 8840 Clinician Programmer executes the application program from the 8870 Application Card. An attacker with physical access to an 8870 Application Card and sufficient technical capability can modify the contents of this card, including the binary executables. If modified to bypass protection mechanisms, this malicious code will be run when the card is inserted into an 8840 Clinician Programmer."
}
],
"value": "The 8840 Clinician Programmer executes the application program from the 8870 Application Card. An attacker with physical access to an 8870 Application Card and sufficient technical capability can modify the contents of this card, including the binary executables. If modified to bypass protection mechanisms, this malicious code will be run when the card is inserted into an 8840 Clinician Programmer."
}
],
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "HIGH",
"attackVector": "PHYSICAL",
"availabilityImpact": "HIGH",
"baseScore": 6.3,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "REQUIRED",
"vectorString": "CVSS:3.1/AV:P/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"format": "CVSS",
"scenarios": [
{
"lang": "en",
"value": "GENERAL"
}
]
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-693",
"description": "CWE-693",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2025-06-27T16:19:26.179Z",
"orgId": "7d14cffa-0d7d-4270-9dc0-52cabd5a23a6",
"shortName": "icscert"
},
"references": [
{
"url": "https://global.medtronic.com/xg-en/product-security/security-bulletins/nvision.html"
},
{
"url": "https://www.medtronic.com/security"
},
{
"url": "https://ics-cert.us-cert.gov/advisories/ICSMA-18-137-01"
},
{
"url": "http://www.securityfocus.com/bid/104213"
}
],
"source": {
"advisory": "ICSMA-18-137-01",
"discovery": "EXTERNAL"
},
"title": "Medtronic N\u0027Vision Clinician Programmer Protection Mechanism Failure",
"workarounds": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eMedtronic has not developed a product update to address the vulnerabilities, but is reinforcing security reminders within this advisory to help reduce the risk associated with the vulnerabilities.\u003c/p\u003e\u003cp\u003eThe 8870 Therapy Application card stores PHI and PII as part of its normal operating procedure and should be handled, managed and secured in a manner consistent with the applicable laws for patient data privacy.\u003c/p\u003e\u003cp\u003eMedtronic recommends users take additional defensive measures to minimize the risk of exploitation of these vulnerabilities. Specifically, hospitals and clinicians should:\u003c/p\u003e\u003cul\u003e\u003cli\u003eMaintain strict physical control of the 8870 application card.\u003c/li\u003e\u003cli\u003eUse only legitimately obtained 8870 cards and not cards provided by any third party as firmware and system updates are provided directly by Medtronic using new 8870 application cards.\u003c/li\u003e\u003cli\u003e8840 Programmers and 8870 Therapy Application compact flash cards are the property of Medtronic and should be returned to Medtronic when no longer in use. If that is not an option, you should securely dispose of them.\u003c/li\u003e\u003c/ul\u003e\u003cp\u003eMedtronic has released additional patient focused information, at the following location:\u003c/p\u003e\u003cp\u003e\u003ca target=\"_blank\" rel=\"nofollow\" href=\"https://www.medtronic.com/security\"\u003ehttps://www.medtronic.com/security\u003c/a\u003e\u003c/p\u003e"
}
],
"value": "Medtronic has not developed a product update to address the vulnerabilities, but is reinforcing security reminders within this advisory to help reduce the risk associated with the vulnerabilities.\n\nThe 8870 Therapy Application card stores PHI and PII as part of its normal operating procedure and should be handled, managed and secured in a manner consistent with the applicable laws for patient data privacy.\n\nMedtronic recommends users take additional defensive measures to minimize the risk of exploitation of these vulnerabilities. Specifically, hospitals and clinicians should:\n\n * Maintain strict physical control of the 8870 application card.\n * Use only legitimately obtained 8870 cards and not cards provided by any third party as firmware and system updates are provided directly by Medtronic using new 8870 application cards.\n * 8840 Programmers and 8870 Therapy Application compact flash cards are the property of Medtronic and should be returned to Medtronic when no longer in use. If that is not an option, you should securely dispose of them.\n\n\nMedtronic has released additional patient focused information, at the following location:\n\n https://www.medtronic.com/security"
}
],
"x_ConverterErrors": {
"DATE_PUBLIC": {
"error": "v4 DATE_PUBLIC is invalid",
"message": "month must be in 1..12"
}
},
"x_generator": {
"engine": "Vulnogram 0.2.0"
},
"x_legacyV4Record": {
"CVE_data_meta": {
"ASSIGNER": "ics-cert@hq.dhs.gov",
"DATE_PUBLIC": "2017-50-17T00:00:00",
"ID": "CVE-2018-10631",
"STATE": "PUBLIC"
},
"affects": {
"vendor": {
"vendor_data": [
{
"product": {
"product_data": [
{
"product_name": "Medtronic N\u0027Vision Clinician Programmer",
"version": {
"version_data": [
{
"version_value": "8840 N\u0027Vision Clinician Programmer, all versions, and 8870 N\u0027Vision removable Application Card, all versions."
}
]
}
}
]
},
"vendor_name": "ICS-CERT"
}
]
}
},
"data_format": "MITRE",
"data_type": "CVE",
"data_version": "4.0",
"description": {
"description_data": [
{
"lang": "eng",
"value": "Medtronic N\u0027Vision Clinician Programmer 8840 N\u0027Vision Clinician Programmer, all versions, and 8870 N\u0027Vision removable Application Card, all versions. The 8840 Clinician Programmer executes the application program from the 8870 Application Card. An attacker with physical access to an 8870 Application Card and sufficient technical capability can modify the contents of this card, including the binary executables. If modified to bypass protection mechanisms, this malicious code will be run when the card is inserted into an 8840 Clinician Programmer."
}
]
},
"problemtype": {
"problemtype_data": [
{
"description": [
{
"lang": "eng",
"value": "PROTECTION MECHANISM FAILURE CWE-693"
}
]
}
]
},
"references": {
"reference_data": [
{
"name": "https://ics-cert.us-cert.gov/advisories/ICSMA-18-137-01",
"refsource": "MISC",
"url": "https://ics-cert.us-cert.gov/advisories/ICSMA-18-137-01"
},
{
"name": "https://www.medtronic.com/security",
"refsource": "MISC",
"url": "https://www.medtronic.com/security"
}
]
}
}
}
},
"cveMetadata": {
"assignerOrgId": "7d14cffa-0d7d-4270-9dc0-52cabd5a23a6",
"assignerShortName": "icscert",
"cveId": "CVE-2018-10631",
"datePublished": "2018-07-13T19:00:00.000Z",
"dateReserved": "2018-05-01T00:00:00.000Z",
"dateUpdated": "2025-08-26T14:26:52.840Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.1"
}
CVE-2018-11459 (GCVE-0-2018-11459)
Vulnerability from cvelistv5 – Published: 2018-12-12 16:00 – Updated: 2024-08-05 08:10
VLAI
Summary
A vulnerability has been identified in SINUMERIK 808D V4.7 (All versions), SINUMERIK 808D V4.8 (All versions), SINUMERIK 828D V4.7 (All versions < V4.7 SP6 HF1), SINUMERIK 840D sl V4.7 (All versions < V4.7 SP6 HF5), SINUMERIK 840D sl V4.8 (All versions < V4.8 SP3). A local attacker could modify a user-writeable configuration file so that after reboot or manual initiation the system reloads the modified configuration file and attacker-controlled code is executed with elevated privileges. The security vulnerability could be exploited by an attacker with local access to the affected system. Successful exploitation requires user privileges but no user interaction. The vulnerability could allow an attacker to compromise confidentiality, integrity and availability of the system. At the time of advisory publication no public exploitation of this security vulnerability was known.
Severity
No CVSS data available.
CWE
- CWE-693 - Protection Mechanism Failure
Assigner
References
2 references
| URL | Tags |
|---|---|
| http://www.securityfocus.com/bid/106185 | vdb-entryx_refsource_BID |
| https://cert-portal.siemens.com/productcert/pdf/s… | x_refsource_CONFIRM |
Impacted products
1 product
| Vendor | Product | Version | |
|---|---|---|---|
| Siemens AG | SINUMERIK 808D V4.7, SINUMERIK 808D V4.8, SINUMERIK 828D V4.7, SINUMERIK 840D sl V4.7, SINUMERIK 840D sl V4.8 |
Affected:
SINUMERIK 808D V4.7 : All versions
Affected: SINUMERIK 808D V4.8 : All versions Affected: SINUMERIK 828D V4.7 : All versions < V4.7 SP6 HF1 Affected: SINUMERIK 840D sl V4.7 : All versions < V4.7 SP6 HF5 Affected: SINUMERIK 840D sl V4.8 : All versions < V4.8 SP3 |
Date Public
2018-12-12 00:00
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2024-08-05T08:10:14.329Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"name": "106185",
"tags": [
"vdb-entry",
"x_refsource_BID",
"x_transferred"
],
"url": "http://www.securityfocus.com/bid/106185"
},
{
"tags": [
"x_refsource_CONFIRM",
"x_transferred"
],
"url": "https://cert-portal.siemens.com/productcert/pdf/ssa-170881.pdf"
}
],
"title": "CVE Program Container"
}
],
"cna": {
"affected": [
{
"product": "SINUMERIK 808D V4.7, SINUMERIK 808D V4.8, SINUMERIK 828D V4.7, SINUMERIK 840D sl V4.7, SINUMERIK 840D sl V4.8",
"vendor": "Siemens AG",
"versions": [
{
"status": "affected",
"version": "SINUMERIK 808D V4.7 : All versions"
},
{
"status": "affected",
"version": "SINUMERIK 808D V4.8 : All versions"
},
{
"status": "affected",
"version": "SINUMERIK 828D V4.7 : All versions \u003c V4.7 SP6 HF1"
},
{
"status": "affected",
"version": "SINUMERIK 840D sl V4.7 : All versions \u003c V4.7 SP6 HF5"
},
{
"status": "affected",
"version": "SINUMERIK 840D sl V4.8 : All versions \u003c V4.8 SP3"
}
]
}
],
"datePublic": "2018-12-12T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "A vulnerability has been identified in SINUMERIK 808D V4.7 (All versions), SINUMERIK 808D V4.8 (All versions), SINUMERIK 828D V4.7 (All versions \u003c V4.7 SP6 HF1), SINUMERIK 840D sl V4.7 (All versions \u003c V4.7 SP6 HF5), SINUMERIK 840D sl V4.8 (All versions \u003c V4.8 SP3). A local attacker could modify a user-writeable configuration file so that after reboot or manual initiation the system reloads the modified configuration file and attacker-controlled code is executed with elevated privileges. The security vulnerability could be exploited by an attacker with local access to the affected system. Successful exploitation requires user privileges but no user interaction. The vulnerability could allow an attacker to compromise confidentiality, integrity and availability of the system. At the time of advisory publication no public exploitation of this security vulnerability was known."
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-693",
"description": "CWE-693: Protection Mechanism Failure",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2018-12-14T10:57:02.000Z",
"orgId": "cec7a2ec-15b4-4faf-bd53-b40f371f3a77",
"shortName": "siemens"
},
"references": [
{
"name": "106185",
"tags": [
"vdb-entry",
"x_refsource_BID"
],
"url": "http://www.securityfocus.com/bid/106185"
},
{
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://cert-portal.siemens.com/productcert/pdf/ssa-170881.pdf"
}
],
"x_legacyV4Record": {
"CVE_data_meta": {
"ASSIGNER": "productcert@siemens.com",
"ID": "CVE-2018-11459",
"STATE": "PUBLIC"
},
"affects": {
"vendor": {
"vendor_data": [
{
"product": {
"product_data": [
{
"product_name": "SINUMERIK 808D V4.7, SINUMERIK 808D V4.8, SINUMERIK 828D V4.7, SINUMERIK 840D sl V4.7, SINUMERIK 840D sl V4.8",
"version": {
"version_data": [
{
"version_value": "SINUMERIK 808D V4.7 : All versions"
},
{
"version_value": "SINUMERIK 808D V4.8 : All versions"
},
{
"version_value": "SINUMERIK 828D V4.7 : All versions \u003c V4.7 SP6 HF1"
},
{
"version_value": "SINUMERIK 840D sl V4.7 : All versions \u003c V4.7 SP6 HF5"
},
{
"version_value": "SINUMERIK 840D sl V4.8 : All versions \u003c V4.8 SP3"
}
]
}
}
]
},
"vendor_name": "Siemens AG"
}
]
}
},
"data_format": "MITRE",
"data_type": "CVE",
"data_version": "4.0",
"description": {
"description_data": [
{
"lang": "eng",
"value": "A vulnerability has been identified in SINUMERIK 808D V4.7 (All versions), SINUMERIK 808D V4.8 (All versions), SINUMERIK 828D V4.7 (All versions \u003c V4.7 SP6 HF1), SINUMERIK 840D sl V4.7 (All versions \u003c V4.7 SP6 HF5), SINUMERIK 840D sl V4.8 (All versions \u003c V4.8 SP3). A local attacker could modify a user-writeable configuration file so that after reboot or manual initiation the system reloads the modified configuration file and attacker-controlled code is executed with elevated privileges. The security vulnerability could be exploited by an attacker with local access to the affected system. Successful exploitation requires user privileges but no user interaction. The vulnerability could allow an attacker to compromise confidentiality, integrity and availability of the system. At the time of advisory publication no public exploitation of this security vulnerability was known."
}
]
},
"problemtype": {
"problemtype_data": [
{
"description": [
{
"lang": "eng",
"value": "CWE-693: Protection Mechanism Failure"
}
]
}
]
},
"references": {
"reference_data": [
{
"name": "106185",
"refsource": "BID",
"url": "http://www.securityfocus.com/bid/106185"
},
{
"name": "https://cert-portal.siemens.com/productcert/pdf/ssa-170881.pdf",
"refsource": "CONFIRM",
"url": "https://cert-portal.siemens.com/productcert/pdf/ssa-170881.pdf"
}
]
}
}
}
},
"cveMetadata": {
"assignerOrgId": "cec7a2ec-15b4-4faf-bd53-b40f371f3a77",
"assignerShortName": "siemens",
"cveId": "CVE-2018-11459",
"datePublished": "2018-12-12T16:00:00.000Z",
"dateReserved": "2018-05-25T00:00:00.000Z",
"dateUpdated": "2024-08-05T08:10:14.329Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.1"
}
No mitigation information available for this CWE.
CAPEC-1: Accessing Functionality Not Properly Constrained by ACLs
In applications, particularly web applications, access to functionality is mitigated by an authorization framework. This framework maps Access Control Lists (ACLs) to elements of the application's functionality; particularly URL's for web apps. In the case that the administrator failed to specify an ACL for a particular element, an attacker may be able to access it with impunity. An attacker with the ability to access functionality not properly constrained by ACLs can obtain sensitive information and possibly compromise the entire application. Such an attacker can access resources that must be available only to users at a higher privilege level, can access management sections of the application, or can run queries for data that they otherwise not supposed to.
CAPEC-107: Cross Site Tracing
Cross Site Tracing (XST) enables an adversary to steal the victim's session cookie and possibly other authentication credentials transmitted in the header of the HTTP request when the victim's browser communicates to a destination system's web server.
CAPEC-127: Directory Indexing
An adversary crafts a request to a target that results in the target listing/indexing the content of a directory as output. One common method of triggering directory contents as output is to construct a request containing a path that terminates in a directory name rather than a file name since many applications are configured to provide a list of the directory's contents when such a request is received. An adversary can use this to explore the directory tree on a target as well as learn the names of files. This can often end up revealing test files, backup files, temporary files, hidden files, configuration files, user accounts, script contents, as well as naming conventions, all of which can be used by an attacker to mount additional attacks.
CAPEC-17: Using Malicious Files
An attack of this type exploits a system's configuration that allows an adversary to either directly access an executable file, for example through shell access; or in a possible worst case allows an adversary to upload a file and then execute it. Web servers, ftp servers, and message oriented middleware systems which have many integration points are particularly vulnerable, because both the programmers and the administrators must be in synch regarding the interfaces and the correct privileges for each interface.
CAPEC-20: Encryption Brute Forcing
An attacker, armed with the cipher text and the encryption algorithm used, performs an exhaustive (brute force) search on the key space to determine the key that decrypts the cipher text to obtain the plaintext.
CAPEC-22: Exploiting Trust in Client
An attack of this type exploits vulnerabilities in client/server communication channel authentication and data integrity. It leverages the implicit trust a server places in the client, or more importantly, that which the server believes is the client. An attacker executes this type of attack by communicating directly with the server where the server believes it is communicating only with a valid client. There are numerous variations of this type of attack.
CAPEC-237: Escaping a Sandbox by Calling Code in Another Language
The attacker may submit malicious code of another language to obtain access to privileges that were not intentionally exposed by the sandbox, thus escaping the sandbox. For instance, Java code cannot perform unsafe operations, such as modifying arbitrary memory locations, due to restrictions placed on it by the Byte code Verifier and the JVM. If allowed, Java code can call directly into native C code, which may perform unsafe operations, such as call system calls and modify arbitrary memory locations on their behalf. To provide isolation, Java does not grant untrusted code with unmediated access to native C code. Instead, the sandboxed code is typically allowed to call some subset of the pre-existing native code that is part of standard libraries.
CAPEC-36: Using Unpublished Interfaces or Functionality
An adversary searches for and invokes interfaces or functionality that the target system designers did not intend to be publicly available. If interfaces fail to authenticate requests, the attacker may be able to invoke functionality they are not authorized for.
CAPEC-477: Signature Spoofing by Mixing Signed and Unsigned Content
An attacker exploits the underlying complexity of a data structure that allows for both signed and unsigned content, to cause unsigned data to be processed as though it were signed data.
CAPEC-480: Escaping Virtualization
An adversary gains access to an application, service, or device with the privileges of an authorized or privileged user by escaping the confines of a virtualized environment. The adversary is then able to access resources or execute unauthorized code within the host environment, generally with the privileges of the user running the virtualized process. Successfully executing an attack of this type is often the first step in executing more complex attacks.
CAPEC-51: Poison Web Service Registry
SOA and Web Services often use a registry to perform look up, get schema information, and metadata about services. A poisoned registry can redirect (think phishing for servers) the service requester to a malicious service provider, provide incorrect information in schema or metadata, and delete information about service provider interfaces.
CAPEC-57: Utilizing REST's Trust in the System Resource to Obtain Sensitive Data
This attack utilizes a REST(REpresentational State Transfer)-style applications' trust in the system resources and environment to obtain sensitive data once SSL is terminated.
CAPEC-59: Session Credential Falsification through Prediction
This attack targets predictable session ID in order to gain privileges. The attacker can predict the session ID used during a transaction to perform spoofing and session hijacking.
CAPEC-65: Sniff Application Code
An adversary passively sniffs network communications and captures application code bound for an authorized client. Once obtained, they can use it as-is, or through reverse-engineering glean sensitive information or exploit the trust relationship between the client and server. Such code may belong to a dynamic update to the client, a patch being applied to a client component or any such interaction where the client is authorized to communicate with the server.
CAPEC-668: Key Negotiation of Bluetooth Attack (KNOB)
An adversary can exploit a flaw in Bluetooth key negotiation allowing them to decrypt information sent between two devices communicating via Bluetooth. The adversary uses an Adversary in the Middle setup to modify packets sent between the two devices during the authentication process, specifically the entropy bits. Knowledge of the number of entropy bits will allow the attacker to easily decrypt information passing over the line of communication.
CAPEC-74: Manipulating State
['The adversary modifies state information maintained by the target software or causes a state transition in hardware. If successful, the target will use this tainted state and execute in an unintended manner.', 'State management is an important function within a software application. User state maintained by the application can include usernames, payment information, browsing history as well as application-specific contents such as items in a shopping cart. Manipulating user state can be employed by an adversary to elevate privilege, conduct fraudulent transactions or otherwise modify the flow of the application to derive certain benefits.', 'If there is a hardware logic error in a finite state machine, the adversary can use this to put the system in an undefined state which could cause a denial of service or exposure of secure data.']
CAPEC-87: Forceful Browsing
An attacker employs forceful browsing (direct URL entry) to access portions of a website that are otherwise unreachable. Usually, a front controller or similar design pattern is employed to protect access to portions of a web application. Forceful browsing enables an attacker to access information, perform privileged operations and otherwise reach sections of the web application that have been improperly protected.