ICSA-20-343-08
Vulnerability from csaf_cisa
Published
2020-12-08 00:00
Modified
2021-05-11 00:00
Summary
Siemens Products using TightVNC (Update A)

Notes

Summary
Multiple TightVNC (V1.x) vulnerabilities could allow remote code execution and Denial-of-Service attacks under certain conditions. Siemens has previously released this advisory containing a set of products that were considered to be affected. Through Siemens' continuous investigation processes it was identified that all products previously advised are not affected by any vulnerability listed in this advisory.
General Recommendations
As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens' operational guidelines for Industrial Security (Download: https://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals. Additional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity
Additional Resources
For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories
Terms of Use
Siemens Security Advisories are subject to the terms and conditions contained in Siemens' underlying license terms or other applicable agreements previously agreed to with Siemens (hereinafter "License Terms"). To the extent applicable to information, software or documentation made available in or through a Siemens Security Advisory, the Terms of Use of Siemens' Global Website (https://www.siemens.com/terms_of_use, hereinafter "Terms of Use"), in particular Sections 8-10 of the Terms of Use, shall apply additionally. In case of conflicts, the License Terms shall prevail over the Terms of Use.
Legal Notice
All information products included in https://us-cert.cisa.gov/ics are provided "as is" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.
Advisory Conversion Disclaimer
This CISA CSAF advisory was converted from Siemens ProductCERT's CSAF advisory.
Critical infrastructure sectors
Multiple
Countries/areas deployed
Worldwide
Company headquarters location
Germany
Recommended Practices
CISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.
Recommended Practices
Minimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.
Recommended Practices
Locate control system networks and remote devices behind firewalls and isolate them from business networks.
Recommended Practices
When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.
Recommended Practices
CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
Recommended Practices
CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
Recommended Practices
CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
Recommended Practices
Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.



{
   document: {
      acknowledgments: [
         {
            organization: "Siemens ProductCERT",
            summary: "reporting these vulnerabilities to CISA.",
         },
      ],
      category: "Siemens Security Advisory",
      csaf_version: "2.0",
      distribution: {
         text: "Disclosure is not limited",
         tlp: {
            label: "WHITE",
            url: "https://us-cert.cisa.gov/tlp/",
         },
      },
      notes: [
         {
            category: "summary",
            text: "Multiple TightVNC (V1.x) vulnerabilities could allow remote code execution and Denial-of-Service attacks under certain conditions.\n\nSiemens has previously released this advisory containing a set of products that were considered to be affected. Through Siemens' continuous investigation processes it was identified that all products previously advised are not affected by any vulnerability listed in this advisory.",
            title: "Summary",
         },
         {
            category: "general",
            text: "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens' operational guidelines for Industrial Security (Download: https://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\n\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
            title: "General Recommendations",
         },
         {
            category: "general",
            text: "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
            title: "Additional Resources",
         },
         {
            category: "legal_disclaimer",
            text: "Siemens Security Advisories are subject to the terms and conditions contained in Siemens' underlying license terms or other applicable agreements previously agreed to with Siemens (hereinafter \"License Terms\"). To the extent applicable to information, software or documentation made available in or through a Siemens Security Advisory, the Terms of Use of Siemens' Global Website (https://www.siemens.com/terms_of_use, hereinafter \"Terms of Use\"), in particular Sections 8-10 of the Terms of Use, shall apply additionally. In case of conflicts, the License Terms shall prevail over the Terms of Use.",
            title: "Terms of Use",
         },
         {
            category: "legal_disclaimer",
            text: "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
            title: "Legal Notice",
         },
         {
            category: "other",
            text: "This CISA CSAF advisory was converted from Siemens ProductCERT's CSAF advisory.",
            title: "Advisory Conversion Disclaimer",
         },
         {
            category: "other",
            text: "Multiple",
            title: "Critical infrastructure sectors",
         },
         {
            category: "other",
            text: "Worldwide",
            title: "Countries/areas deployed",
         },
         {
            category: "other",
            text: "Germany",
            title: "Company headquarters location",
         },
         {
            category: "general",
            text: "CISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.",
            title: "Recommended Practices",
         },
         {
            category: "general",
            text: "Minimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.",
            title: "Recommended Practices",
         },
         {
            category: "general",
            text: "Locate control system networks and remote devices behind firewalls and isolate them from business networks.",
            title: "Recommended Practices",
         },
         {
            category: "general",
            text: "When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.",
            title: "Recommended Practices",
         },
         {
            category: "general",
            text: "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
            title: "Recommended Practices",
         },
         {
            category: "general",
            text: "CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
            title: "Recommended Practices",
         },
         {
            category: "general",
            text: "CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
            title: "Recommended Practices",
         },
         {
            category: "general",
            text: "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.",
            title: "Recommended Practices",
         },
      ],
      publisher: {
         category: "other",
         contact_details: "central@cisa.dhs.gov",
         name: "CISA",
         namespace: "https://www.cisa.gov/",
      },
      references: [
         {
            category: "self",
            summary: "SSA-478893: TightVNC Vulnerabilities in Industrial Products (Revoked) - CSAF Version",
            url: "https://cert-portal.siemens.com/productcert/csaf/ssa-478893.json",
         },
         {
            category: "self",
            summary: "SSA-478893: TightVNC Vulnerabilities in Industrial Products (Revoked) - TXT Version",
            url: "https://cert-portal.siemens.com/productcert/txt/ssa-478893.txt",
         },
         {
            category: "self",
            summary: "SSA-478893: TightVNC Vulnerabilities in Industrial Products (Revoked) - PDF Version",
            url: "https://cert-portal.siemens.com/productcert/pdf/ssa-478893.pdf",
         },
         {
            category: "self",
            summary: "ICS Advisory ICSA-20-343-08 JSON",
            url: "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2020/icsa-20-343-08.json",
         },
         {
            category: "self",
            summary: "ICS Advisory ICSA-20-343-08 - Web Version",
            url: "https://www.cisa.gov/news-events/ics-advisories/icsa-20-343-08",
         },
         {
            category: "external",
            summary: "Recommended Practices",
            url: "https://www.cisa.gov/uscert/ics/alerts/ICS-ALERT-10-301-01",
         },
         {
            category: "external",
            summary: "Recommended Practices",
            url: "https://www.cisa.gov/resources-tools/resources/ics-recommended-practices",
         },
         {
            category: "external",
            summary: "Recommended Practices",
            url: "https://www.cisa.gov/topics/industrial-control-systems",
         },
         {
            category: "external",
            summary: "Recommended Practices",
            url: "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf",
         },
         {
            category: "external",
            summary: "Recommended Practices",
            url: "https://www.cisa.gov/sites/default/files/publications/Cybersecurity_Best_Practices_for_Industrial_Control_Systems.pdf",
         },
         {
            category: "external",
            summary: "Recommended Practices",
            url: "https://www.cisa.gov/uscert/ics/tips/ICS-TIP-12-146-01B",
         },
      ],
      title: "Siemens Products using TightVNC (Update A)",
      tracking: {
         current_release_date: "2021-05-11T00:00:00.000000Z",
         generator: {
            engine: {
               name: "CISA CSAF Generator",
               version: "1.0.0",
            },
         },
         id: "ICSA-20-343-08",
         initial_release_date: "2020-12-08T00:00:00.000000Z",
         revision_history: [
            {
               date: "2020-12-08T00:00:00.000000Z",
               legacy_version: "1.0",
               number: "1",
               summary: "Publication Date",
            },
            {
               date: "2021-05-11T00:00:00.000000Z",
               legacy_version: "1.1",
               number: "2",
               summary: "Errata - Revoked advisory",
            },
         ],
         status: "final",
         version: "2",
      },
   },
   product_tree: {
      branches: [
         {
            branches: [
               {
                  branches: [
                     {
                        category: "product_version_range",
                        name: "vers:all/*",
                        product: {
                           name: "SIMATIC HMI Comfort Outdoor Panels 7\" & 15\" (incl. SIPLUS variants)",
                           product_id: "CSAFPID-0001",
                        },
                     },
                  ],
                  category: "product_name",
                  name: "SIMATIC HMI Comfort Outdoor Panels 7\" & 15\" (incl. SIPLUS variants)",
               },
               {
                  branches: [
                     {
                        category: "product_version_range",
                        name: "vers:all/*",
                        product: {
                           name: "SIMATIC HMI Comfort Panels 4\" - 22\" (incl. SIPLUS variants)",
                           product_id: "CSAFPID-0002",
                        },
                     },
                  ],
                  category: "product_name",
                  name: "SIMATIC HMI Comfort Panels 4\" - 22\" (incl. SIPLUS variants)",
               },
               {
                  branches: [
                     {
                        category: "product_version_range",
                        name: "vers:all/*",
                        product: {
                           name: "SIMATIC HMI KTP Mobile Panels KTP400F, KTP700, KTP700F, KTP900 and KTP900F",
                           product_id: "CSAFPID-0003",
                        },
                     },
                  ],
                  category: "product_name",
                  name: "SIMATIC HMI KTP Mobile Panels KTP400F, KTP700, KTP700F, KTP900 and KTP900F",
               },
               {
                  branches: [
                     {
                        category: "product_version_range",
                        name: "vers:all/*",
                        product: {
                           name: "SIMATIC ITC1500 V3.1",
                           product_id: "CSAFPID-0004",
                        },
                     },
                  ],
                  category: "product_name",
                  name: "SIMATIC ITC1500 V3.1",
               },
               {
                  branches: [
                     {
                        category: "product_version_range",
                        name: "vers:all/*",
                        product: {
                           name: "SIMATIC ITC1500 V3.1 PRO",
                           product_id: "CSAFPID-0005",
                        },
                     },
                  ],
                  category: "product_name",
                  name: "SIMATIC ITC1500 V3.1 PRO",
               },
               {
                  branches: [
                     {
                        category: "product_version_range",
                        name: "vers:all/*",
                        product: {
                           name: "SIMATIC ITC1900 V3.1",
                           product_id: "CSAFPID-0006",
                        },
                     },
                  ],
                  category: "product_name",
                  name: "SIMATIC ITC1900 V3.1",
               },
               {
                  branches: [
                     {
                        category: "product_version_range",
                        name: "vers:all/*",
                        product: {
                           name: "SIMATIC ITC1900 V3.1 PRO",
                           product_id: "CSAFPID-0007",
                        },
                     },
                  ],
                  category: "product_name",
                  name: "SIMATIC ITC1900 V3.1 PRO",
               },
               {
                  branches: [
                     {
                        category: "product_version_range",
                        name: "vers:all/*",
                        product: {
                           name: "SIMATIC ITC2200 V3.1",
                           product_id: "CSAFPID-0008",
                        },
                     },
                  ],
                  category: "product_name",
                  name: "SIMATIC ITC2200 V3.1",
               },
               {
                  branches: [
                     {
                        category: "product_version_range",
                        name: "vers:all/*",
                        product: {
                           name: "SIMATIC ITC2200 V3.1 PRO",
                           product_id: "CSAFPID-0009",
                        },
                     },
                  ],
                  category: "product_name",
                  name: "SIMATIC ITC2200 V3.1 PRO",
               },
               {
                  branches: [
                     {
                        category: "product_version_range",
                        name: "vers:all/*",
                        product: {
                           name: "SIMATIC WinCC Runtime Advanced",
                           product_id: "CSAFPID-0010",
                        },
                     },
                  ],
                  category: "product_name",
                  name: "SIMATIC WinCC Runtime Advanced",
               },
               {
                  branches: [
                     {
                        category: "product_version_range",
                        name: "vers:all/*",
                        product: {
                           name: "SIMATIC WinCC Runtime Professional",
                           product_id: "CSAFPID-0011",
                        },
                     },
                  ],
                  category: "product_name",
                  name: "SIMATIC WinCC Runtime Professional",
               },
            ],
            category: "vendor",
            name: "Siemens",
         },
      ],
   },
   vulnerabilities: [
      {
         cve: "CVE-2019-8287",
         cwe: {
            id: "CWE-120",
            name: "Buffer Copy without Checking Size of Input ('Classic Buffer Overflow')",
         },
         notes: [
            {
               category: "summary",
               text: "TightVNC code version 1.3.10 contains global buffer overflow in HandleCoRREBBP macro function, which can potentially result in code execution. This attack appear to be exploitable via network connectivity.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
               "CSAFPID-0002",
               "CSAFPID-0003",
               "CSAFPID-0004",
               "CSAFPID-0005",
               "CSAFPID-0006",
               "CSAFPID-0007",
               "CSAFPID-0008",
               "CSAFPID-0009",
               "CSAFPID-0010",
               "CSAFPID-0011",
            ],
         },
         references: [
            {
               summary: "CVE-2019-8287 Mitre 5.0 json",
               url: "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-8287.json",
            },
         ],
         remediations: [
            {
               category: "vendor_fix",
               details: "This product is not affected by any vulnerability listed in this advisory",
               product_ids: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0006",
                  "CSAFPID-0007",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
                  "CSAFPID-0010",
                  "CSAFPID-0011",
               ],
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 9.8,
                  baseSeverity: "CRITICAL",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0006",
                  "CSAFPID-0007",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
                  "CSAFPID-0010",
                  "CSAFPID-0011",
               ],
            },
         ],
         title: "CVE-2019-8287",
      },
      {
         cve: "CVE-2019-15678",
         cwe: {
            id: "CWE-122",
            name: "Heap-based Buffer Overflow",
         },
         notes: [
            {
               category: "summary",
               text: "TightVNC code version 1.3.10 contains heap buffer overflow in rfbServerCutText handler, which can potentially result in code execution. This attack appear to be exploitable via network connectivity.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
               "CSAFPID-0002",
               "CSAFPID-0003",
               "CSAFPID-0004",
               "CSAFPID-0005",
               "CSAFPID-0006",
               "CSAFPID-0007",
               "CSAFPID-0008",
               "CSAFPID-0009",
               "CSAFPID-0010",
               "CSAFPID-0011",
            ],
         },
         references: [
            {
               summary: "CVE-2019-15678 Mitre 5.0 json",
               url: "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-15678.json",
            },
         ],
         remediations: [
            {
               category: "vendor_fix",
               details: "This product is not affected by any vulnerability listed in this advisory",
               product_ids: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0006",
                  "CSAFPID-0007",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
                  "CSAFPID-0010",
                  "CSAFPID-0011",
               ],
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 9.8,
                  baseSeverity: "CRITICAL",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0006",
                  "CSAFPID-0007",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
                  "CSAFPID-0010",
                  "CSAFPID-0011",
               ],
            },
         ],
         title: "CVE-2019-15678",
      },
      {
         cve: "CVE-2019-15679",
         cwe: {
            id: "CWE-122",
            name: "Heap-based Buffer Overflow",
         },
         notes: [
            {
               category: "summary",
               text: "TightVNC code version 1.3.10 contains heap buffer overflow in InitialiseRFBConnection function, which can potentially result in code execution. This attack appear to be exploitable via network connectivity.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
               "CSAFPID-0002",
               "CSAFPID-0003",
               "CSAFPID-0004",
               "CSAFPID-0005",
               "CSAFPID-0006",
               "CSAFPID-0007",
               "CSAFPID-0008",
               "CSAFPID-0009",
               "CSAFPID-0010",
               "CSAFPID-0011",
            ],
         },
         references: [
            {
               summary: "CVE-2019-15679 Mitre 5.0 json",
               url: "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-15679.json",
            },
         ],
         remediations: [
            {
               category: "vendor_fix",
               details: "This product is not affected by any vulnerability listed in this advisory",
               product_ids: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0006",
                  "CSAFPID-0007",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
                  "CSAFPID-0010",
                  "CSAFPID-0011",
               ],
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 9.8,
                  baseSeverity: "CRITICAL",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0006",
                  "CSAFPID-0007",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
                  "CSAFPID-0010",
                  "CSAFPID-0011",
               ],
            },
         ],
         title: "CVE-2019-15679",
      },
      {
         cve: "CVE-2019-15680",
         cwe: {
            id: "CWE-476",
            name: "NULL Pointer Dereference",
         },
         notes: [
            {
               category: "summary",
               text: "TightVNC code version 1.3.10 contains null pointer dereference in HandleZlibBPP function, which could result in a Denial-of-Service (DoS). This attack appear to be exploitable via network connectivity.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
               "CSAFPID-0002",
               "CSAFPID-0003",
               "CSAFPID-0004",
               "CSAFPID-0005",
               "CSAFPID-0006",
               "CSAFPID-0007",
               "CSAFPID-0008",
               "CSAFPID-0009",
               "CSAFPID-0010",
               "CSAFPID-0011",
            ],
         },
         references: [
            {
               summary: "CVE-2019-15680 Mitre 5.0 json",
               url: "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-15680.json",
            },
         ],
         remediations: [
            {
               category: "vendor_fix",
               details: "This product is not affected by any vulnerability listed in this advisory",
               product_ids: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0006",
                  "CSAFPID-0007",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
                  "CSAFPID-0010",
                  "CSAFPID-0011",
               ],
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0006",
                  "CSAFPID-0007",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
                  "CSAFPID-0010",
                  "CSAFPID-0011",
               ],
            },
         ],
         title: "CVE-2019-15680",
      },
   ],
}


Log in or create an account to share your comment.

Security Advisory comment format.

This schema specifies the format of a comment related to a security advisory.

UUIDv4 of the comment
UUIDv4 of the Vulnerability-Lookup instance
When the comment was created originally
When the comment was last updated
Title of the comment
Description of the comment
The identifier of the vulnerability (CVE ID, GHSA-ID, PYSEC ID, etc.).



Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Sightings

Author Source Type Date

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
  • Confirmed: The vulnerability is confirmed from an analyst perspective.
  • Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
  • Patched: This vulnerability was successfully patched by the user reporting the sighting.
  • Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
  • Not confirmed: The user expresses doubt about the veracity of the vulnerability.
  • Not patched: This vulnerability was not successfully patched by the user reporting the sighting.