csaf_cisa - icsa-24-004-02

icsa-24-004-02

Vulnerability from csaf_cisa

Published

2024-01-04 07:00

Modified

2024-01-04 07:00

Summary

Mitsubishi Electric Factory Automation Products

Notes

Legal Notice

All information products included in https://us-cert.cisa.gov/ics are provided "as is" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.

Risk evaluation

Successful exploitation of these vulnerabilities could disclose information in the product or could cause denial-of-service (DoS) condition.

Critical infrastructure sectors

Critical Manufacturing

Countries/areas deployed

Worldwide

Company headquarters location

Japan

Recommended Practices

CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.

Recommended Practices

CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.

Recommended Practices

CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.

Recommended Practices

Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.

Recommended Practices

Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.

Recommended Practices

No known public exploitation specifically targeting these vulnerabilities has been reported to CISA at this time.

JSON

To clipboard

{
  "document": {
    "acknowledgments": [
      {
        "organization": "Mitsubishi Electric",
        "summary": "reporting these vulnerabilities to CISA"
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited",
      "tlp": {
        "label": "WHITE",
        "url": "https://us-cert.cisa.gov/tlp/"
      }
    },
    "lang": "en-US",
    "notes": [
      {
        "category": "legal_disclaimer",
        "text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
        "title": "Legal Notice"
      },
      {
        "category": "summary",
        "text": "Successful exploitation of these vulnerabilities could disclose information in the product or could cause denial-of-service (DoS) condition.",
        "title": "Risk evaluation"
      },
      {
        "category": "other",
        "text": "Critical Manufacturing",
        "title": "Critical infrastructure sectors"
      },
      {
        "category": "other",
        "text": "Worldwide",
        "title": "Countries/areas deployed"
      },
      {
        "category": "other",
        "text": "Japan",
        "title": "Company headquarters location"
      },
      {
        "category": "general",
        "text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "No known public exploitation specifically targeting these vulnerabilities has been reported to CISA at this time.",
        "title": "Recommended Practices"
      }
    ],
    "publisher": {
      "category": "coordinator",
      "contact_details": "central@cisa.dhs.gov",
      "name": "CISA",
      "namespace": "https://www.cisa.gov/"
    },
    "references": [
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-24-004-02 JSON",
        "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2024/icsa-24-004-02.json"
      },
      {
        "category": "self",
        "summary": "ICSA Advisory ICSA-24-004-02 - Web Version",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-24-004-02"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/resources-tools/resources/ics-recommended-practices"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/sites/default/files/publications/Cybersecurity_Best_Practices_for_Industrial_Control_Systems.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/topics/industrial-control-systems"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/alerts/ICS-ALERT-10-301-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/tips/ICS-TIP-12-146-01B"
      }
    ],
    "title": "Mitsubishi Electric Factory Automation Products",
    "tracking": {
      "current_release_date": "2024-01-04T07:00:00.000000Z",
      "generator": {
        "engine": {
          "name": "CISA CSAF Generator",
          "version": "1.0.0"
        }
      },
      "id": "ICSA-24-004-02",
      "initial_release_date": "2024-01-04T07:00:00.000000Z",
      "revision_history": [
        {
          "date": "2024-01-04T07:00:00.000000Z",
          "legacy_version": "Initial",
          "number": "1",
          "summary": "Initial Publication"
        }
      ],
      "status": "final",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003e=1.275M|\u003c1.290C",
                "product": {
                  "name": "Mitsubishi Electric GT SoftGOT2000: \u003e=1.275M|\u003c1.290C",
                  "product_id": "CSAFPID-0001"
                }
              }
            ],
            "category": "product_name",
            "name": "GT SoftGOT2000"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003c=1.04E",
                "product": {
                  "name": "Mitsubishi Electric OPC UA Data Collector: \u003c=1.04E",
                  "product_id": "CSAFPID-0002"
                }
              }
            ],
            "category": "product_name",
            "name": "OPC UA Data Collector"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003e=3.05F_Packaged_with_MC_Works64_4.03D",
                "product": {
                  "name": "Mitsubishi Electric MX OPC Server UA (Software packaged with MC Works64): \u003e=3.05F_Packaged_with_MC_Works64_4.03D",
                  "product_id": "CSAFPID-0003"
                }
              }
            ],
            "category": "product_name",
            "name": "MX OPC Server UA (Software packaged with MC Works64)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/*",
                "product": {
                  "name": "Mitsubishi Electric OPC UA Server Unit: vers:all/*",
                  "product_id": "CSAFPID-0004"
                }
              }
            ],
            "category": "product_name",
            "name": "OPC UA Server Unit"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003c=1.006_",
                "product": {
                  "name": "Mitsubishi Electric FX5-OPC: \u003c=1.006_",
                  "product_id": "CSAFPID-0005"
                }
              }
            ],
            "category": "product_name",
            "name": "FX5-OPC"
          }
        ],
        "category": "vendor",
        "name": "Mitsubishi Electric"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2022-4304",
      "cwe": {
        "id": "CWE-208",
        "name": "Observable Timing Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The affected products contain an observable timing discrepancy vulnerability in their RSA decryption implementation. By sending specially crafted packets and performing a Bleichenbacher style attack, an attack method to decrypt ciphertext by observing the behavior when a padding error occurs, an attacker could decrypt the ciphertext and disclose sensitive information.",
          "title": "Vulnerability Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "web.nvd.nist.gov",
          "url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2022-4304"
        },
        {
          "category": "external",
          "summary": "www.first.org",
          "url": "https://www.first.org/cvss/calculator/3.1#CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitsbuishi Electric recommends that users update their products to the following versions:",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "mitigation",
          "details": "GT SoftGOT2000: Version 1.295H or later",
          "product_ids": [
            "CSAFPID-0001"
          ]
        },
        {
          "category": "mitigation",
          "details": "OPC UA data collector: 1.05F or later",
          "product_ids": [
            "CSAFPID-0002"
          ]
        },
        {
          "category": "mitigation",
          "details": "MX OPC Server UA: Use recommended mitigations/workarounds",
          "product_ids": [
            "CSAFPID-0003"
          ]
        },
        {
          "category": "mitigation",
          "details": "OPC UA server unit: Use recommended mitigations/workarounds",
          "product_ids": [
            "CSAFPID-0004"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "FX5-OPC: Version 1.010 or later",
          "product_ids": [
            "CSAFPID-0005"
          ]
        },
        {
          "category": "mitigation",
          "details": "Mitsubishi Electric recommends that users take the following mitigation measures to minimize the risk of exploiting these vulnerabilities:",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "mitigation",
          "details": "GT SoftGOT2000 and OPC UA Data Collector: Do not load untrusted certificate revocation lists (CRLs).",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        },
        {
          "category": "mitigation",
          "details": "MX OPC Server UA: Use within a LAN and block access from untrusted networks and hosts through firewalls. Restrict physical access to the product, as well as to computers and network devices located within the same network as the product. Use a firewall or virtual private network (VPN), etc. to prevent unauthorized access when Internet access is required.",
          "product_ids": [
            "CSAFPID-0003"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "OPC UA Server Unit: Use within a LAN and block access from untrusted networks and hosts through firewalls. Restrict physical access to the product, as well as to computers and network devices located within the same network as the product. Use a firewall or virtual private network (VPN), etc. to prevent unauthorized access when Internet access is required. Set a security policy other than \u0027None\u0027 in security setting function to prevent unauthorized access. For details on security setting function, please refer to the MELSEC iQ-R OPC UA Server Unit User\u0027s Manual (Application), section 1.1 \"OPC UA Server Function\".",
          "product_ids": [
            "CSAFPID-0004"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "FX5-OPC: Use within a LAN and block access from untrusted networks and hosts through firewalls. Restrict physical access to the product, as well as to computers and network devices located within the same network as the product. Use a firewall or virtual private network (VPN), etc. to prevent unauthorized access when Internet access is required. Use the IP filter function to block access from untrusted hosts. For details on the IP filter function, please refer to the MELSEC iQ-F FX5 OPC UA Module User\u0027s Manual section 4.4 \"IP Filter.\" Do not import untrusted certificates.",
          "product_ids": [
            "CSAFPID-0005"
          ]
        },
        {
          "category": "mitigation",
          "details": "For additional details, see the Mitsubishi Electric advisory 2023-018.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://www.mitsubishielectric.com/en/psirt/vulnerability/pdf/2023-018_en.pdf"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ]
    },
    {
      "cve": "CVE-2022-4450",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The affected products contain a double free vulnerability when reading a PEM file. An attacker could cause denial-of-service (DoS) on the product by leading a legitimate user to importing a malicious certificate.",
          "title": "Vulnerability Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0005"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "web.nvd.nist.gov",
          "url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2022-4450"
        },
        {
          "category": "external",
          "summary": "www.first.org",
          "url": "https://www.first.org/cvss/calculator/3.1#CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitsbuishi Electric recommends that users update their products to the following versions:",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "mitigation",
          "details": "GT SoftGOT2000: Version 1.295H or later",
          "product_ids": [
            "CSAFPID-0001"
          ]
        },
        {
          "category": "mitigation",
          "details": "OPC UA data collector: 1.05F or later",
          "product_ids": [
            "CSAFPID-0002"
          ]
        },
        {
          "category": "mitigation",
          "details": "MX OPC Server UA: Use recommended mitigations/workarounds",
          "product_ids": [
            "CSAFPID-0003"
          ]
        },
        {
          "category": "mitigation",
          "details": "OPC UA server unit: Use recommended mitigations/workarounds",
          "product_ids": [
            "CSAFPID-0004"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "FX5-OPC: Version 1.010 or later",
          "product_ids": [
            "CSAFPID-0005"
          ]
        },
        {
          "category": "mitigation",
          "details": "Mitsubishi Electric recommends that users take the following mitigation measures to minimize the risk of exploiting these vulnerabilities:",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "mitigation",
          "details": "GT SoftGOT2000 and OPC UA Data Collector: Do not load untrusted certificate revocation lists (CRLs).",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        },
        {
          "category": "mitigation",
          "details": "MX OPC Server UA: Use within a LAN and block access from untrusted networks and hosts through firewalls. Restrict physical access to the product, as well as to computers and network devices located within the same network as the product. Use a firewall or virtual private network (VPN), etc. to prevent unauthorized access when Internet access is required.",
          "product_ids": [
            "CSAFPID-0003"
          ]
        },
        {
          "category": "mitigation",
          "details": "OPC UA Server Unit: Use within a LAN and block access from untrusted networks and hosts through firewalls. Restrict physical access to the product, as well as to computers and network devices located within the same network as the product. Use a firewall or virtual private network (VPN), etc. to prevent unauthorized access when Internet access is required. Set a security policy other than \u0027None\u0027 in security setting function to prevent unauthorized access. For details on security setting function, please refer to the MELSEC iQ-R OPC UA Server Unit User\u0027s Manual (Application), section 1.1 \"OPC UA Server Function\".",
          "product_ids": [
            "CSAFPID-0004"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "FX5-OPC: Use within a LAN and block access from untrusted networks and hosts through firewalls. Restrict physical access to the product, as well as to computers and network devices located within the same network as the product. Use a firewall or virtual private network (VPN), etc. to prevent unauthorized access when Internet access is required. Use the IP filter function to block access from untrusted hosts. For details on the IP filter function, please refer to the MELSEC iQ-F FX5 OPC UA Module User\u0027s Manual section 4.4 \"IP Filter.\" Do not import untrusted certificates.",
          "product_ids": [
            "CSAFPID-0005"
          ]
        },
        {
          "category": "mitigation",
          "details": "For additional details, see the Mitsubishi Electric advisory 2023-018.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://www.mitsubishielectric.com/en/psirt/vulnerability/pdf/2023-018_en.pdf"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0005"
          ]
        }
      ]
    },
    {
      "cve": "CVE-2023-0286",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The affected products contain a type confusion vulnerability relating to X.400 addressprocessing inside an X.509 GeneralName. An attacker could disclose sensitive information in memory of the product or cause denial-of-service (DoS) on the product by getting to load a specially crafted certificate revocation list (CRL).",
          "title": "Vulnerability Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "web.nvd.nist.gov",
          "url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2023-0286"
        },
        {
          "category": "external",
          "summary": "www.first.org",
          "url": "https://www.first.org/cvss/calculator/3.1#CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:H"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitsbuishi Electric recommends that users update their products to the following versions:",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "mitigation",
          "details": "GT SoftGOT2000: Version 1.295H or later",
          "product_ids": [
            "CSAFPID-0001"
          ]
        },
        {
          "category": "mitigation",
          "details": "OPC UA data collector: 1.05F or later",
          "product_ids": [
            "CSAFPID-0002"
          ]
        },
        {
          "category": "mitigation",
          "details": "MX OPC Server UA: Use recommended mitigations/workarounds",
          "product_ids": [
            "CSAFPID-0003"
          ]
        },
        {
          "category": "mitigation",
          "details": "OPC UA server unit: Use recommended mitigations/workarounds",
          "product_ids": [
            "CSAFPID-0004"
          ]
        },
        {
          "category": "mitigation",
          "details": "FX5-OPC: Version 1.010 or later",
          "product_ids": [
            "CSAFPID-0005"
          ]
        },
        {
          "category": "mitigation",
          "details": "Mitsubishi Electric recommends that users take the following mitigation measures to minimize the risk of exploiting these vulnerabilities:",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "mitigation",
          "details": "GT SoftGOT2000 and OPC UA Data Collector: Do not load untrusted certificate revocation lists (CRLs).",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        },
        {
          "category": "mitigation",
          "details": "MX OPC Server UA: Use within a LAN and block access from untrusted networks and hosts through firewalls. Restrict physical access to the product, as well as to computers and network devices located within the same network as the product. Use a firewall or virtual private network (VPN), etc. to prevent unauthorized access when Internet access is required.",
          "product_ids": [
            "CSAFPID-0003"
          ]
        },
        {
          "category": "mitigation",
          "details": "OPC UA Server Unit: Use within a LAN and block access from untrusted networks and hosts through firewalls. Restrict physical access to the product, as well as to computers and network devices located within the same network as the product. Use a firewall or virtual private network (VPN), etc. to prevent unauthorized access when Internet access is required. Set a security policy other than \u0027None\u0027 in security setting function to prevent unauthorized access. For details on security setting function, please refer to the MELSEC iQ-R OPC UA Server Unit User\u0027s Manual (Application), section 1.1 \"OPC UA Server Function\".",
          "product_ids": [
            "CSAFPID-0004"
          ]
        },
        {
          "category": "mitigation",
          "details": "FX5-OPC: Use within a LAN and block access from untrusted networks and hosts through firewalls. Restrict physical access to the product, as well as to computers and network devices located within the same network as the product. Use a firewall or virtual private network (VPN), etc. to prevent unauthorized access when Internet access is required. Use the IP filter function to block access from untrusted hosts. For details on the IP filter function, please refer to the MELSEC iQ-F FX5 OPC UA Module User\u0027s Manual section 4.4 \"IP Filter.\" Do not import untrusted certificates.",
          "product_ids": [
            "CSAFPID-0005"
          ]
        },
        {
          "category": "mitigation",
          "details": "For additional details, see the Mitsubishi Electric advisory 2023-018.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://www.mitsubishielectric.com/en/psirt/vulnerability/pdf/2023-018_en.pdf"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ]
    }
  ]
}

cve-2022-4450

Vulnerability from cvelistv5

Published

2023-02-08 19:04

Modified

2024-08-03 01:41

Severity ?

Summary

Double free after calling PEM_read_bio_ex

References

▼	URL	Tags
	https://www.openssl.org/news/secadv/20230207.txt	vendor-advisory
	https://git.openssl.org/gitweb/?p=openssl.git;a=commitdiff;h=63bcf189be73a9cc1264059bed6f57974be74a83	patch
	https://git.openssl.org/gitweb/?p=openssl.git;a=commitdiff;h=bbcf509bd046b34cca19c766bbddc31683d0858b	patch
	https://security.gentoo.org/glsa/202402-08

Impacted products

▼	Vendor	Product
	OpenSSL	OpenSSL

Show details on NVD website

JSON

To clipboard

{
  "containers": {
    "adp": [
      {
        "providerMetadata": {
          "dateUpdated": "2024-08-03T01:41:44.632Z",
          "orgId": "af854a3a-2127-422b-91ae-364da2661108",
          "shortName": "CVE"
        },
        "references": [
          {
            "name": "OpenSSL Advisory",
            "tags": [
              "vendor-advisory",
              "x_transferred"
            ],
            "url": "https://www.openssl.org/news/secadv/20230207.txt"
          },
          {
            "name": "3.0.8 git commit",
            "tags": [
              "patch",
              "x_transferred"
            ],
            "url": "https://git.openssl.org/gitweb/?p=openssl.git;a=commitdiff;h=63bcf189be73a9cc1264059bed6f57974be74a83"
          },
          {
            "name": "1.1.1t git commit",
            "tags": [
              "patch",
              "x_transferred"
            ],
            "url": "https://git.openssl.org/gitweb/?p=openssl.git;a=commitdiff;h=bbcf509bd046b34cca19c766bbddc31683d0858b"
          },
          {
            "tags": [
              "x_transferred"
            ],
            "url": "https://security.gentoo.org/glsa/202402-08"
          }
        ],
        "title": "CVE Program Container"
      }
    ],
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "OpenSSL",
          "vendor": "OpenSSL",
          "versions": [
            {
              "lessThan": "3.0.8",
              "status": "affected",
              "version": "3.0.0",
              "versionType": "semver"
            },
            {
              "lessThan": "1.1.1t",
              "status": "affected",
              "version": "1.1.1",
              "versionType": "custom"
            }
          ]
        }
      ],
      "credits": [
        {
          "lang": "en",
          "type": "finder",
          "user": "00000000-0000-4000-9000-000000000000",
          "value": "CarpetFuzz"
        },
        {
          "lang": "en",
          "type": "reporter",
          "user": "00000000-0000-4000-9000-000000000000",
          "value": "Dawei Wang"
        },
        {
          "lang": "en",
          "type": "reporter",
          "user": "00000000-0000-4000-9000-000000000000",
          "value": "Marc Sch\u00f6nefeld"
        },
        {
          "lang": "en",
          "type": "remediation developer",
          "user": "00000000-0000-4000-9000-000000000000",
          "value": "Kurt Roeckx"
        },
        {
          "lang": "en",
          "type": "remediation developer",
          "user": "00000000-0000-4000-9000-000000000000",
          "value": "Matt Caswell"
        }
      ],
      "datePublic": "2023-02-07T00:00:00.000Z",
      "descriptions": [
        {
          "lang": "en",
          "supportingMedia": [
            {
              "base64": false,
              "type": "text/html",
              "value": "The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and\u003cbr\u003edecodes the \"name\" (e.g. \"CERTIFICATE\"), any header data and the payload data.\u003cbr\u003eIf the function succeeds then the \"name_out\", \"header\" and \"data\" arguments are\u003cbr\u003epopulated with pointers to buffers containing the relevant decoded data. The\u003cbr\u003ecaller is responsible for freeing those buffers. It is possible to construct a\u003cbr\u003ePEM file that results in 0 bytes of payload data. In this case PEM_read_bio_ex()\u003cbr\u003ewill return a failure code but will populate the header argument with a pointer\u003cbr\u003eto a buffer that has already been freed. If the caller also frees this buffer\u003cbr\u003ethen a double free will occur. This will most likely lead to a crash. This\u003cbr\u003ecould be exploited by an attacker who has the ability to supply malicious PEM\u003cbr\u003efiles for parsing to achieve a denial of service attack.\u003cbr\u003e\u003cbr\u003eThe functions PEM_read_bio() and PEM_read() are simple wrappers around\u003cbr\u003ePEM_read_bio_ex() and therefore these functions are also directly affected.\u003cbr\u003e\u003cbr\u003eThese functions are also called indirectly by a number of other OpenSSL\u003cbr\u003efunctions including PEM_X509_INFO_read_bio_ex() and\u003cbr\u003eSSL_CTX_use_serverinfo_file() which are also vulnerable. Some OpenSSL internal\u003cbr\u003euses of these functions are not vulnerable because the caller does not free the\u003cbr\u003eheader argument if PEM_read_bio_ex() returns a failure code. These locations\u003cbr\u003einclude the PEM_read_bio_TYPE() functions as well as the decoders introduced in\u003cbr\u003eOpenSSL 3.0.\u003cbr\u003e\u003cbr\u003e\u003cdiv\u003eThe OpenSSL asn1parse command line application is also impacted by this issue.\u003c/div\u003e\u003cbr\u003e"
            }
          ],
          "value": "The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and\ndecodes the \"name\" (e.g. \"CERTIFICATE\"), any header data and the payload data.\nIf the function succeeds then the \"name_out\", \"header\" and \"data\" arguments are\npopulated with pointers to buffers containing the relevant decoded data. The\ncaller is responsible for freeing those buffers. It is possible to construct a\nPEM file that results in 0 bytes of payload data. In this case PEM_read_bio_ex()\nwill return a failure code but will populate the header argument with a pointer\nto a buffer that has already been freed. If the caller also frees this buffer\nthen a double free will occur. This will most likely lead to a crash. This\ncould be exploited by an attacker who has the ability to supply malicious PEM\nfiles for parsing to achieve a denial of service attack.\n\nThe functions PEM_read_bio() and PEM_read() are simple wrappers around\nPEM_read_bio_ex() and therefore these functions are also directly affected.\n\nThese functions are also called indirectly by a number of other OpenSSL\nfunctions including PEM_X509_INFO_read_bio_ex() and\nSSL_CTX_use_serverinfo_file() which are also vulnerable. Some OpenSSL internal\nuses of these functions are not vulnerable because the caller does not free the\nheader argument if PEM_read_bio_ex() returns a failure code. These locations\ninclude the PEM_read_bio_TYPE() functions as well as the decoders introduced in\nOpenSSL 3.0.\n\nThe OpenSSL asn1parse command line application is also impacted by this issue.\n\n\n"
        }
      ],
      "metrics": [
        {
          "format": "other",
          "other": {
            "content": {
              "text": "Moderate"
            },
            "type": "https://www.openssl.org/policies/secpolicy.html"
          }
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "description": "double-free",
              "lang": "en"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2023-02-24T14:53:33.164Z",
        "orgId": "3a12439a-ef3a-4c79-92e6-6081a721f1e5",
        "shortName": "openssl"
      },
      "references": [
        {
          "name": "OpenSSL Advisory",
          "tags": [
            "vendor-advisory"
          ],
          "url": "https://www.openssl.org/news/secadv/20230207.txt"
        },
        {
          "name": "3.0.8 git commit",
          "tags": [
            "patch"
          ],
          "url": "https://git.openssl.org/gitweb/?p=openssl.git;a=commitdiff;h=63bcf189be73a9cc1264059bed6f57974be74a83"
        },
        {
          "name": "1.1.1t git commit",
          "tags": [
            "patch"
          ],
          "url": "https://git.openssl.org/gitweb/?p=openssl.git;a=commitdiff;h=bbcf509bd046b34cca19c766bbddc31683d0858b"
        },
        {
          "url": "https://security.gentoo.org/glsa/202402-08"
        }
      ],
      "source": {
        "discovery": "UNKNOWN"
      },
      "title": "Double free after calling PEM_read_bio_ex",
      "x_generator": {
        "engine": "Vulnogram 0.1.0-dev"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "3a12439a-ef3a-4c79-92e6-6081a721f1e5",
    "assignerShortName": "openssl",
    "cveId": "CVE-2022-4450",
    "datePublished": "2023-02-08T19:04:04.874Z",
    "dateReserved": "2022-12-13T13:38:08.598Z",
    "dateUpdated": "2024-08-03T01:41:44.632Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.1"
}

cve-2022-4304

Vulnerability from cvelistv5

Published

2023-02-08 19:04

Modified

2024-08-03 01:34

Severity ?

Summary

Timing Oracle in RSA Decryption

References

▼	URL	Tags
	https://www.openssl.org/news/secadv/20230207.txt	vendor-advisory
	https://security.gentoo.org/glsa/202402-08

Impacted products

▼	Vendor	Product
	OpenSSL	OpenSSL

Show details on NVD website

JSON

To clipboard

{
  "containers": {
    "adp": [
      {
        "providerMetadata": {
          "dateUpdated": "2024-08-03T01:34:50.158Z",
          "orgId": "af854a3a-2127-422b-91ae-364da2661108",
          "shortName": "CVE"
        },
        "references": [
          {
            "name": "OpenSSL Advisory",
            "tags": [
              "vendor-advisory",
              "x_transferred"
            ],
            "url": "https://www.openssl.org/news/secadv/20230207.txt"
          },
          {
            "tags": [
              "x_transferred"
            ],
            "url": "https://security.gentoo.org/glsa/202402-08"
          }
        ],
        "title": "CVE Program Container"
      }
    ],
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "OpenSSL",
          "vendor": "OpenSSL",
          "versions": [
            {
              "lessThan": "3.0.8",
              "status": "affected",
              "version": "3.0.0",
              "versionType": "semver"
            },
            {
              "lessThan": "1.1.1t",
              "status": "affected",
              "version": "1.1.1",
              "versionType": "custom"
            },
            {
              "lessThan": "1.0.2zg",
              "status": "affected",
              "version": "1.0.2",
              "versionType": "custom"
            }
          ]
        }
      ],
      "credits": [
        {
          "lang": "en",
          "type": "finder",
          "user": "00000000-0000-4000-9000-000000000000",
          "value": "Hubert Kario from RedHat"
        },
        {
          "lang": "en",
          "type": "remediation developer",
          "user": "00000000-0000-4000-9000-000000000000",
          "value": "Dmitry Belyavsky from RedHat"
        },
        {
          "lang": "en",
          "type": "remediation developer",
          "user": "00000000-0000-4000-9000-000000000000",
          "value": " Hubert Kario from RedHat"
        }
      ],
      "datePublic": "2023-02-07T00:00:00.000Z",
      "descriptions": [
        {
          "lang": "en",
          "supportingMedia": [
            {
              "base64": false,
              "type": "text/html",
              "value": "A timing based side channel exists in the OpenSSL RSA Decryption implementation\u003cbr\u003ewhich could be sufficient to recover a plaintext across a network in a\u003cbr\u003eBleichenbacher style attack. To achieve a successful decryption an attacker\u003cbr\u003ewould have to be able to send a very large number of trial messages for\u003cbr\u003edecryption. The vulnerability affects all RSA padding modes: PKCS#1 v1.5,\u003cbr\u003eRSA-OEAP and RSASVE.\u003cbr\u003e\u003cbr\u003eFor example, in a TLS connection, RSA is commonly used by a client to send an\u003cbr\u003eencrypted pre-master secret to the server. An attacker that had observed a\u003cbr\u003egenuine connection between a client and a server could use this flaw to send\u003cbr\u003etrial messages to the server and record the time taken to process them. After a\u003cbr\u003esufficiently large number of messages the attacker could recover the pre-master\u003cbr\u003esecret used for the original connection and thus be able to decrypt the\u003cbr\u003eapplication data sent over that connection.\u003cbr\u003e\u003cbr\u003e"
            }
          ],
          "value": "A timing based side channel exists in the OpenSSL RSA Decryption implementation\nwhich could be sufficient to recover a plaintext across a network in a\nBleichenbacher style attack. To achieve a successful decryption an attacker\nwould have to be able to send a very large number of trial messages for\ndecryption. The vulnerability affects all RSA padding modes: PKCS#1 v1.5,\nRSA-OEAP and RSASVE.\n\nFor example, in a TLS connection, RSA is commonly used by a client to send an\nencrypted pre-master secret to the server. An attacker that had observed a\ngenuine connection between a client and a server could use this flaw to send\ntrial messages to the server and record the time taken to process them. After a\nsufficiently large number of messages the attacker could recover the pre-master\nsecret used for the original connection and thus be able to decrypt the\napplication data sent over that connection.\n\n"
        }
      ],
      "metrics": [
        {
          "format": "other",
          "other": {
            "content": {
              "text": "MODERATE"
            },
            "type": "https://www.openssl.org/policies/secpolicy.html"
          }
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "description": "timing based side channel attack",
              "lang": "en"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2023-02-08T19:04:28.890Z",
        "orgId": "3a12439a-ef3a-4c79-92e6-6081a721f1e5",
        "shortName": "openssl"
      },
      "references": [
        {
          "name": "OpenSSL Advisory",
          "tags": [
            "vendor-advisory"
          ],
          "url": "https://www.openssl.org/news/secadv/20230207.txt"
        },
        {
          "url": "https://security.gentoo.org/glsa/202402-08"
        }
      ],
      "source": {
        "discovery": "UNKNOWN"
      },
      "title": "Timing Oracle in RSA Decryption",
      "x_generator": {
        "engine": "Vulnogram 0.1.0-dev"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "3a12439a-ef3a-4c79-92e6-6081a721f1e5",
    "assignerShortName": "openssl",
    "cveId": "CVE-2022-4304",
    "datePublished": "2023-02-08T19:04:28.890Z",
    "dateReserved": "2022-12-06T10:38:40.463Z",
    "dateUpdated": "2024-08-03T01:34:50.158Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.1"
}

cve-2023-0286

Vulnerability from cvelistv5

Published

2023-02-08 19:01

Modified

2024-08-02 05:02

Severity ?

Summary

X.400 address type confusion in X.509 GeneralName

References

▼	URL	Tags
	https://www.openssl.org/news/secadv/20230207.txt	vendor-advisory
	https://git.openssl.org/gitweb/?p=openssl.git;a=commitdiff;h=2f7530077e0ef79d98718138716bc51ca0cad658	patch
	https://git.openssl.org/gitweb/?p=openssl.git;a=commitdiff;h=2c6c9d439b484e1ba9830d8454a34fa4f80fdfe9	patch
	https://git.openssl.org/gitweb/?p=openssl.git;a=commitdiff;h=fd2af07dc083a350c959147097003a14a5e8ac4d	patch
	https://ftp.openbsd.org/pub/OpenBSD/patches/7.2/common/018_x509.patch.sig
	https://ftp.openbsd.org/pub/OpenBSD/LibreSSL/libressl-3.6.2-relnotes.txt
	https://security.gentoo.org/glsa/202402-08

Impacted products

▼	Vendor	Product
	OpenSSL	OpenSSL

Show details on NVD website

JSON

To clipboard

{
  "containers": {
    "adp": [
      {
        "providerMetadata": {
          "dateUpdated": "2024-08-02T05:02:44.187Z",
          "orgId": "af854a3a-2127-422b-91ae-364da2661108",
          "shortName": "CVE"
        },
        "references": [
          {
            "name": "OpenSSL Advisory",
            "tags": [
              "vendor-advisory",
              "x_transferred"
            ],
            "url": "https://www.openssl.org/news/secadv/20230207.txt"
          },
          {
            "name": "3.0.8 git commit",
            "tags": [
              "patch",
              "x_transferred"
            ],
            "url": "https://git.openssl.org/gitweb/?p=openssl.git;a=commitdiff;h=2f7530077e0ef79d98718138716bc51ca0cad658"
          },
          {
            "name": "1.1.1t git commit",
            "tags": [
              "patch",
              "x_transferred"
            ],
            "url": "https://git.openssl.org/gitweb/?p=openssl.git;a=commitdiff;h=2c6c9d439b484e1ba9830d8454a34fa4f80fdfe9"
          },
          {
            "name": "1.0.2zg patch (premium)",
            "tags": [
              "patch",
              "x_transferred"
            ],
            "url": "https://git.openssl.org/gitweb/?p=openssl.git;a=commitdiff;h=fd2af07dc083a350c959147097003a14a5e8ac4d"
          },
          {
            "tags": [
              "x_transferred"
            ],
            "url": "https://ftp.openbsd.org/pub/OpenBSD/patches/7.2/common/018_x509.patch.sig"
          },
          {
            "tags": [
              "x_transferred"
            ],
            "url": "https://ftp.openbsd.org/pub/OpenBSD/LibreSSL/libressl-3.6.2-relnotes.txt"
          },
          {
            "tags": [
              "x_transferred"
            ],
            "url": "https://security.gentoo.org/glsa/202402-08"
          }
        ],
        "title": "CVE Program Container"
      }
    ],
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "OpenSSL",
          "vendor": "OpenSSL",
          "versions": [
            {
              "lessThan": "3.0.8",
              "status": "affected",
              "version": "3.0.0",
              "versionType": "semver"
            },
            {
              "lessThan": "1.1.1t",
              "status": "affected",
              "version": "1.1.1",
              "versionType": "custom"
            },
            {
              "lessThan": "1.0.2zg",
              "status": "affected",
              "version": "1.0.2",
              "versionType": "custom"
            }
          ]
        }
      ],
      "credits": [
        {
          "lang": "en",
          "type": "reporter",
          "user": "00000000-0000-4000-9000-000000000000",
          "value": "David Benjamin (Google)"
        },
        {
          "lang": "en",
          "type": "remediation developer",
          "user": "00000000-0000-4000-9000-000000000000",
          "value": "Hugo Landau"
        }
      ],
      "datePublic": "2023-02-07T00:00:00.000Z",
      "descriptions": [
        {
          "lang": "en",
          "supportingMedia": [
            {
              "base64": false,
              "type": "text/html",
              "value": "There is a type confusion vulnerability relating to X.400 address processing\u003cbr\u003einside an X.509 GeneralName. X.400 addresses were parsed as an ASN1_STRING but\u003cbr\u003ethe public structure definition for GENERAL_NAME incorrectly specified the type\u003cbr\u003eof the x400Address field as ASN1_TYPE. This field is subsequently interpreted by\u003cbr\u003ethe OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an\u003cbr\u003eASN1_STRING.\u003cbr\u003e\u003cbr\u003eWhen CRL checking is enabled (i.e. the application sets the\u003cbr\u003eX509_V_FLAG_CRL_CHECK flag), this vulnerability may allow an attacker to pass\u003cbr\u003earbitrary pointers to a memcmp call, enabling them to read memory contents or\u003cbr\u003eenact a denial of service. In most cases, the attack requires the attacker to\u003cbr\u003eprovide both the certificate chain and CRL, neither of which need to have a\u003cbr\u003evalid signature. If the attacker only controls one of these inputs, the other\u003cbr\u003einput must already contain an X.400 address as a CRL distribution point, which\u003cbr\u003eis uncommon. As such, this vulnerability is most likely to only affect\u003cbr\u003eapplications which have implemented their own functionality for retrieving CRLs\u003cbr\u003eover a network.\u003cbr\u003e\u003cbr\u003e"
            }
          ],
          "value": "There is a type confusion vulnerability relating to X.400 address processing\ninside an X.509 GeneralName. X.400 addresses were parsed as an ASN1_STRING but\nthe public structure definition for GENERAL_NAME incorrectly specified the type\nof the x400Address field as ASN1_TYPE. This field is subsequently interpreted by\nthe OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an\nASN1_STRING.\n\nWhen CRL checking is enabled (i.e. the application sets the\nX509_V_FLAG_CRL_CHECK flag), this vulnerability may allow an attacker to pass\narbitrary pointers to a memcmp call, enabling them to read memory contents or\nenact a denial of service. In most cases, the attack requires the attacker to\nprovide both the certificate chain and CRL, neither of which need to have a\nvalid signature. If the attacker only controls one of these inputs, the other\ninput must already contain an X.400 address as a CRL distribution point, which\nis uncommon. As such, this vulnerability is most likely to only affect\napplications which have implemented their own functionality for retrieving CRLs\nover a network.\n\n"
        }
      ],
      "metrics": [
        {
          "format": "other",
          "other": {
            "content": {
              "text": "High"
            },
            "type": "https://www.openssl.org/policies/secpolicy.html"
          }
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "description": " type confusion vulnerability",
              "lang": "en"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2023-03-27T18:25:32.958867Z",
        "orgId": "3a12439a-ef3a-4c79-92e6-6081a721f1e5",
        "shortName": "openssl"
      },
      "references": [
        {
          "name": "OpenSSL Advisory",
          "tags": [
            "vendor-advisory"
          ],
          "url": "https://www.openssl.org/news/secadv/20230207.txt"
        },
        {
          "name": "3.0.8 git commit",
          "tags": [
            "patch"
          ],
          "url": "https://git.openssl.org/gitweb/?p=openssl.git;a=commitdiff;h=2f7530077e0ef79d98718138716bc51ca0cad658"
        },
        {
          "name": "1.1.1t git commit",
          "tags": [
            "patch"
          ],
          "url": "https://git.openssl.org/gitweb/?p=openssl.git;a=commitdiff;h=2c6c9d439b484e1ba9830d8454a34fa4f80fdfe9"
        },
        {
          "name": "1.0.2zg patch (premium)",
          "tags": [
            "patch"
          ],
          "url": "https://git.openssl.org/gitweb/?p=openssl.git;a=commitdiff;h=fd2af07dc083a350c959147097003a14a5e8ac4d"
        },
        {
          "url": "https://ftp.openbsd.org/pub/OpenBSD/patches/7.2/common/018_x509.patch.sig"
        },
        {
          "url": "https://ftp.openbsd.org/pub/OpenBSD/LibreSSL/libressl-3.6.2-relnotes.txt"
        },
        {
          "url": "https://security.gentoo.org/glsa/202402-08"
        }
      ],
      "source": {
        "discovery": "UNKNOWN"
      },
      "title": "X.400 address type confusion in X.509 GeneralName",
      "x_generator": {
        "engine": "Vulnogram 0.1.0-dev"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "3a12439a-ef3a-4c79-92e6-6081a721f1e5",
    "assignerShortName": "openssl",
    "cveId": "CVE-2023-0286",
    "datePublished": "2023-02-08T19:01:50.514Z",
    "dateReserved": "2023-01-13T10:40:41.259Z",
    "dateUpdated": "2024-08-02T05:02:44.187Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.1"
}

Action not permitted

icsa-24-004-02

Vulnerability from csaf_cisa

cve-2022-4450

Vulnerability from cvelistv5

cve-2022-4304

Vulnerability from cvelistv5

cve-2023-0286

Vulnerability from cvelistv5

Tags