CWE-835

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-15163",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-07-09T13:49:18.560769Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-07-09T13:49:25.283Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Wireshark",
          "vendor": "Wireshark Foundation",
          "versions": [
            {
              "lessThan": "4.6.7",
              "status": "affected",
              "version": "4.6.0",
              "versionType": "semver"
            },
            {
              "lessThan": "4.4.17",
              "status": "affected",
              "version": "4.4.0",
              "versionType": "semver"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "Multiple protocol dissector infinite loops in Wireshark 4.6.0 to 4.6.6 and 4.4.0 to 4.4.16 allow denial of service"
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "attackComplexity": "LOW",
            "attackVector": "LOCAL",
            "availabilityImpact": "HIGH",
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "REQUIRED",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "format": "CVSS",
          "scenarios": [
            {
              "lang": "en",
              "value": "GENERAL"
            }
          ]
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-835",
              "description": "CWE-835: Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-07-08T20:50:40.278Z",
        "orgId": "ceab7361-8a18-47b1-92ba-4d7d25f6715a",
        "shortName": "GitLab"
      },
      "references": [
        {
          "url": "https://www.wireshark.org/security/wnpa-sec-2026-61.html"
        },
        {
          "url": "https://gitlab.com/wireshark/wireshark/-/work_items/21275"
        },
        {
          "url": "https://gitlab.com/wireshark/wireshark/-/work_items/21277"
        },
        {
          "url": "https://gitlab.com/wireshark/wireshark/-/work_items/21330"
        },
        {
          "url": "https://gitlab.com/wireshark/wireshark/-/work_items/21383"
        }
      ],
      "solutions": [
        {
          "lang": "en",
          "value": "Upgrade to version 4.6.7 or above"
        }
      ],
      "title": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027) in Wireshark"
    }
  },
  "cveMetadata": {
    "assignerOrgId": "ceab7361-8a18-47b1-92ba-4d7d25f6715a",
    "assignerShortName": "GitLab",
    "cveId": "CVE-2026-15163",
    "datePublished": "2026-07-08T20:50:40.278Z",
    "dateReserved": "2026-07-08T20:45:13.994Z",
    "dateUpdated": "2026-07-09T13:49:25.283Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-14258",
                "options": [
                  {
                    "Exploitation": "poc"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-07-01T12:20:39.579180Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-07-01T12:20:42.349Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "references": [
          {
            "tags": [
              "exploit"
            ],
            "url": "https://github.com/NetworkConfiguration/dhcpcd/issues/415"
          }
        ],
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
          "cpes": [
            "cpe:/o:redhat:enterprise_linux:10.2"
          ],
          "defaultStatus": "affected",
          "packageName": "dhcpcd",
          "product": "Red Hat Enterprise Linux 10",
          "vendor": "Red Hat",
          "versions": [
            {
              "lessThan": "*",
              "status": "unaffected",
              "version": "0:10.0.6-11.el10_2",
              "versionType": "rpm"
            }
          ]
        }
      ],
      "credits": [
        {
          "lang": "en",
          "value": "Red Hat would like to thank AISLE Research for reporting this issue."
        }
      ],
      "datePublic": "2024-12-01T00:00:00.000Z",
      "descriptions": [
        {
          "lang": "en",
          "value": "A flaw was found in dhcpcd\u0027s IPv6 Neighbor Discovery Router Advertisement processing. A specially crafted IPv6 Router Advertisement containing a zero-length Neighbor Discovery option can bypass validation during packet storage and later be reparsed without adequate validation, causing the parser to enter a non-advancing loop. Successful exploitation may result in excessive CPU consumption, leading to a denial of service."
        }
      ],
      "metrics": [
        {
          "other": {
            "content": {
              "namespace": "https://access.redhat.com/security/updates/classification/",
              "value": "Moderate"
            },
            "type": "Red Hat severity rating"
          }
        },
        {
          "cvssV3_1": {
            "attackComplexity": "LOW",
            "attackVector": "ADJACENT_NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "format": "CVSS"
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-835",
              "description": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-08-12T15:49:21.570Z",
        "orgId": "53f830b8-0a3f-465b-8143-3b8a9948e749",
        "shortName": "redhat"
      },
      "references": [
        {
          "name": "RHSA-2026:54210",
          "tags": [
            "vendor-advisory",
            "x_refsource_REDHAT"
          ],
          "url": "https://access.redhat.com/errata/RHSA-2026:54210"
        },
        {
          "tags": [
            "vdb-entry",
            "x_refsource_REDHAT"
          ],
          "url": "https://access.redhat.com/security/cve/CVE-2026-14258"
        },
        {
          "name": "RHBZ#2462305",
          "tags": [
            "issue-tracking",
            "x_refsource_REDHAT"
          ],
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2462305"
        },
        {
          "url": "https://github.com/NetworkConfiguration/dhcpcd/commit/75289ca"
        },
        {
          "url": "https://github.com/NetworkConfiguration/dhcpcd/issues/415"
        }
      ],
      "timeline": [
        {
          "lang": "en",
          "time": "2026-04-26T18:47:11.000Z",
          "value": "Reported to Red Hat."
        },
        {
          "lang": "en",
          "time": "2024-12-01T00:00:00.000Z",
          "value": "Made public."
        }
      ],
      "title": "Dhcpcd: dhcpcd infinite loop and out-of-bounds read via zero-length ipv6 nd option in router advertisement handling",
      "workarounds": [
        {
          "lang": "en",
          "value": "Until an updated package is available, administrators should disable IPv6 Router Advertisement processing on interfaces where it is not required or restrict acceptance of untrusted ICMPv6 Router Advertisements using appropriate network filtering. \n\nSystems that rely on IPv6 Stateless Address Autoconfiguration (SLAAC) or Router Advertisement-based network configuration should carefully evaluate the operational impact before applying these mitigations."
        }
      ],
      "x_generator": {
        "engine": "cvelib 1.8.0"
      },
      "x_redhatCweChain": "CWE-835: Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
    }
  },
  "cveMetadata": {
    "assignerOrgId": "53f830b8-0a3f-465b-8143-3b8a9948e749",
    "assignerShortName": "redhat",
    "cveId": "CVE-2026-14258",
    "datePublished": "2026-07-01T09:24:51.479Z",
    "dateReserved": "2026-06-30T15:57:04.334Z",
    "dateUpdated": "2026-08-12T15:49:21.570Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}

{
  "containers": {
    "adp": [
      {
        "providerMetadata": {
          "dateUpdated": "2026-07-16T19:27:57.805Z",
          "orgId": "af854a3a-2127-422b-91ae-364da2661108",
          "shortName": "CVE"
        },
        "references": [
          {
            "url": "http://www.openwall.com/lists/oss-security/2026/07/16/2"
          }
        ],
        "title": "CVE Program Container"
      },
      {
        "metrics": [
          {
            "cvssV3_1": {
              "attackComplexity": "LOW",
              "attackVector": "NETWORK",
              "availabilityImpact": "HIGH",
              "baseScore": 7.5,
              "baseSeverity": "HIGH",
              "confidentialityImpact": "NONE",
              "integrityImpact": "NONE",
              "privilegesRequired": "NONE",
              "scope": "UNCHANGED",
              "userInteraction": "NONE",
              "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
              "version": "3.1"
            }
          },
          {
            "other": {
              "content": {
                "id": "CVE-2026-13401",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "yes"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-07-17T12:51:48.086715Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-07-17T12:51:52.550Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "collectionURL": "https://cpan.org/modules",
          "defaultStatus": "unaffected",
          "packageName": "XML-Bare",
          "product": "XML::Bare",
          "programFiles": [
            "parser.c"
          ],
          "programRoutines": [
            {
              "name": "parserc_parse"
            }
          ],
          "repo": "https://github.com/nanoscopic/perl-XML-Bare",
          "vendor": "CODECHILD",
          "versions": [
            {
              "lessThanOrEqual": "0.53",
              "status": "affected",
              "version": "0",
              "versionType": "custom"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "XML::Bare versions through 0.53 for Perl will hang in an infinite loop when parsing malformed attributes.\n\nThe parserc_parse function never advances the attribute-parse state cursor on certain malformed attribute forms, looping forever.\n\nNameless attributes such as \"\u003ca =\u0027c\u0027\u003e\" or unbalanced quotes \"\u003ca b=\u0027\u0027\u0027\u0027\u0027\u0027\u0027c\u0027\u003e\" can trigger this condition."
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-835",
              "description": "CWE-835 Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-07-16T16:14:50.176Z",
        "orgId": "9b29abf9-4ab0-4765-b253-1875cd9b441e",
        "shortName": "CPANSec"
      },
      "references": [
        {
          "tags": [
            "issue-tracking"
          ],
          "url": "https://github.com/nanoscopic/perl-XML-Bare/pull/2"
        },
        {
          "tags": [
            "patch"
          ],
          "url": "https://security.metacpan.org/patches/X/XML-Bare/0.53/CVE-2026-13401-r1.patch"
        }
      ],
      "source": {
        "discovery": "UNKNOWN"
      },
      "title": "XML::Bare versions through 0.53 for Perl will hang in an infinite loop when parsing malformed attributes",
      "workarounds": [
        {
          "lang": "en",
          "value": "Apply the patch."
        }
      ],
      "x_generator": {
        "engine": "cpansec-cna-tool 0.1"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "9b29abf9-4ab0-4765-b253-1875cd9b441e",
    "assignerShortName": "CPANSec",
    "cveId": "CVE-2026-13401",
    "datePublished": "2026-07-16T16:14:50.176Z",
    "dateReserved": "2026-06-26T08:38:33.750Z",
    "dateUpdated": "2026-07-17T12:51:52.550Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}

{
  "containers": {
    "adp": [
      {
        "providerMetadata": {
          "dateUpdated": "2026-07-16T19:27:56.736Z",
          "orgId": "af854a3a-2127-422b-91ae-364da2661108",
          "shortName": "CVE"
        },
        "references": [
          {
            "url": "http://www.openwall.com/lists/oss-security/2026/07/16/4"
          }
        ],
        "title": "CVE Program Container"
      },
      {
        "metrics": [
          {
            "cvssV3_1": {
              "attackComplexity": "LOW",
              "attackVector": "NETWORK",
              "availabilityImpact": "HIGH",
              "baseScore": 7.5,
              "baseSeverity": "HIGH",
              "confidentialityImpact": "NONE",
              "integrityImpact": "NONE",
              "privilegesRequired": "NONE",
              "scope": "UNCHANGED",
              "userInteraction": "NONE",
              "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
              "version": "3.1"
            }
          },
          {
            "other": {
              "content": {
                "id": "CVE-2026-13397",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "yes"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-07-17T13:29:35.290635Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-07-17T13:30:45.877Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "collectionURL": "https://cpan.org/modules",
          "defaultStatus": "unaffected",
          "packageName": "HTML-Bare",
          "product": "HTML::Bare",
          "programFiles": [
            "parser.c"
          ],
          "programRoutines": [
            {
              "name": "parserc_parse"
            }
          ],
          "repo": "https://github.com/nanoscopic/perl-HTML-Bare",
          "vendor": "CODECHILD",
          "versions": [
            {
              "lessThanOrEqual": "0.04",
              "status": "affected",
              "version": "0",
              "versionType": "custom"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "HTML::Bare versions through 0.04 for Perl will hang in an infinite loop when parsing malformed attributes.\n\nThe parserc_parse function never advances the attribute-parse state cursor on certain malformed attribute forms, looping forever.\n\nNameless attributes such as \"\u003ca =\u0027c\u0027\u003e\" or unbalanced quotes \"\u003ca b=\u0027\u0027\u0027\u0027\u0027\u0027\u0027c\u0027\u003e\" can trigger this condition.\n\nNote that the latest version available on CPAN is version 0.02. Newer versions are available on the git repository."
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-835",
              "description": "CWE-835 Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-07-16T16:14:14.891Z",
        "orgId": "9b29abf9-4ab0-4765-b253-1875cd9b441e",
        "shortName": "CPANSec"
      },
      "references": [
        {
          "tags": [
            "issue-tracking"
          ],
          "url": "https://github.com/nanoscopic/perl-HTML-Bare/pull/1"
        },
        {
          "tags": [
            "patch"
          ],
          "url": "https://security.metacpan.org/patches/H/HTML-Bare/0.02/CVE-2026-13397-r1.patch"
        }
      ],
      "source": {
        "discovery": "UNKNOWN"
      },
      "title": "HTML::Bare versions through 0.04 for Perl will hang in an infinite loop when parsing malformed attributes",
      "workarounds": [
        {
          "lang": "en",
          "value": "Apply the patch."
        }
      ],
      "x_generator": {
        "engine": "cpansec-cna-tool 0.1"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "9b29abf9-4ab0-4765-b253-1875cd9b441e",
    "assignerShortName": "CPANSec",
    "cveId": "CVE-2026-13397",
    "datePublished": "2026-07-16T16:14:14.891Z",
    "dateReserved": "2026-06-26T08:25:15.552Z",
    "dateUpdated": "2026-07-17T13:30:45.877Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-13002",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-08-14T16:08:55.591278Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-08-14T16:09:15.195Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
          "cpes": [
            "cpe:/o:redhat:enterprise_linux:10"
          ],
          "defaultStatus": "affected",
          "packageName": "dnsmasq",
          "product": "Red Hat Enterprise Linux 10",
          "vendor": "Red Hat"
        },
        {
          "collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
          "cpes": [
            "cpe:/o:redhat:enterprise_linux:6"
          ],
          "defaultStatus": "unaffected",
          "packageName": "dnsmasq",
          "product": "Red Hat Enterprise Linux 6",
          "vendor": "Red Hat"
        },
        {
          "collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
          "cpes": [
            "cpe:/o:redhat:enterprise_linux:7"
          ],
          "defaultStatus": "unaffected",
          "packageName": "dnsmasq",
          "product": "Red Hat Enterprise Linux 7",
          "vendor": "Red Hat"
        },
        {
          "collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
          "cpes": [
            "cpe:/o:redhat:enterprise_linux:8"
          ],
          "defaultStatus": "affected",
          "packageName": "dnsmasq",
          "product": "Red Hat Enterprise Linux 8",
          "vendor": "Red Hat"
        },
        {
          "collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
          "cpes": [
            "cpe:/o:redhat:enterprise_linux:9"
          ],
          "defaultStatus": "affected",
          "packageName": "dnsmasq",
          "product": "Red Hat Enterprise Linux 9",
          "vendor": "Red Hat"
        },
        {
          "collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
          "cpes": [
            "cpe:/a:redhat:openshift:4"
          ],
          "defaultStatus": "affected",
          "packageName": "openshift/ose-rhel-coreos-8",
          "product": "Red Hat OpenShift Container Platform 4",
          "vendor": "Red Hat"
        },
        {
          "collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
          "cpes": [
            "cpe:/a:redhat:openshift:4"
          ],
          "defaultStatus": "affected",
          "packageName": "openshift/ose-rhel-coreos-9",
          "product": "Red Hat OpenShift Container Platform 4",
          "vendor": "Red Hat"
        }
      ],
      "credits": [
        {
          "lang": "en",
          "value": "Red Hat would like to thank Lennart Espe for reporting this issue."
        }
      ],
      "datePublic": "2026-06-08T12:00:00.000Z",
      "descriptions": [
        {
          "lang": "en",
          "value": "A flow has been identified into dnssec.c library, causing an infinite loop to dnsmasq service. An attacker who controls any DNSSEC-signed zone can hang the dnsmasq process with a single crafted response, killing all DNS resolution for its clients."
        }
      ],
      "metrics": [
        {
          "other": {
            "content": {
              "namespace": "https://access.redhat.com/security/updates/classification/",
              "value": "Low"
            },
            "type": "Red Hat severity rating"
          }
        },
        {
          "cvssV3_1": {
            "attackComplexity": "LOW",
            "attackVector": "LOCAL",
            "availabilityImpact": "HIGH",
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "HIGH",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "format": "CVSS"
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-835",
              "description": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-08-31T17:38:09.418Z",
        "orgId": "53f830b8-0a3f-465b-8143-3b8a9948e749",
        "shortName": "redhat"
      },
      "references": [
        {
          "tags": [
            "vdb-entry",
            "x_refsource_REDHAT"
          ],
          "url": "https://access.redhat.com/security/cve/CVE-2026-13002"
        },
        {
          "name": "RHBZ#2486360",
          "tags": [
            "issue-tracking",
            "x_refsource_REDHAT"
          ],
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2486360"
        }
      ],
      "timeline": [
        {
          "lang": "en",
          "time": "2026-06-08T13:30:57.057Z",
          "value": "Reported to Red Hat."
        },
        {
          "lang": "en",
          "time": "2026-06-08T12:00:00.000Z",
          "value": "Made public."
        }
      ],
      "title": "Dnsmasq: infinite loop dos in dnssec nsec/nsec3 type bitmap parsing",
      "workarounds": [
        {
          "lang": "en",
          "value": "Mitigation for this issue is either not available or the currently available options do not meet the Red Hat Product Security criteria comprising ease of use and deployment, applicability to widespread installation base or stability."
        }
      ],
      "x_generator": {
        "engine": "cvelib 1.8.0"
      },
      "x_redhatCweChain": "CWE-835: Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
    }
  },
  "cveMetadata": {
    "assignerOrgId": "53f830b8-0a3f-465b-8143-3b8a9948e749",
    "assignerShortName": "redhat",
    "cveId": "CVE-2026-13002",
    "datePublished": "2026-08-14T15:02:26.469Z",
    "dateReserved": "2026-06-23T13:53:15.018Z",
    "dateUpdated": "2026-08-31T17:38:09.418Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-12629",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-08-17T18:26:54.616442Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-08-17T18:27:37.225Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
          "defaultStatus": "unaffected",
          "packageName": "zephyr",
          "product": "zephyr",
          "programFiles": [
            "drivers/serial/uart_pl011.c"
          ],
          "vendor": "zephyrproject",
          "versions": [
            {
              "lessThan": "4.4.2",
              "status": "affected",
              "version": "1.14.0",
              "versionType": "semver"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "The ARM PL011 UART driver in drivers/serial/uart_pl011.c fails to acknowledge receive error interrupts. On the PL011, the framing, parity, break, and overrun error interrupts (PL011_IMSC_ERROR_MASK) are cleared only by writing the interrupt-clear register UARTICR; reading the data register clears the RX interrupt and the per-byte RSR status but not the error interrupt status in MIS. The interrupt service routine pl011_isr() acknowledged only the CTS modem-status interrupt and never wrote icr for the error bits, so an asserted error interrupt remains pending after the ISR returns.\n\nWhen an application enables error-interrupt reporting via the public uart_irq_err_enable() API, an attacker who controls the serial peer can deterministically assert these error bits by injecting line errors on the RX line \u2014 a baud/stop-bit mismatch or mid-character break (framing/break error), a flipped parity bit (parity error), or FIFO flooding (overrun error). Because the error interrupt is never cleared, the interrupt line stays asserted and the CPU re-enters pl011_isr() immediately and indefinitely, producing an interrupt-storm livelock from which the core makes no forward progress.\n\nThe impact is an availability-only denial of service (permanent hang), reachable from an external or removable UART peer. Exploitation is gated by configuration: the error interrupt is off by default and no in-tree subsystem enables it, so only applications that explicitly call uart_irq_err_enable() on a PL011-based, interrupt-driven port are affected. The fix makes pl011_isr() acknowledge the pending error bits via uart-\u003eicr, breaking the loop, and additionally clears the latched RSR status in pl011_err_check()."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "baseScore": 4.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "format": "CVSS"
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-835",
              "description": "dos",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-08-17T16:18:50.322Z",
        "orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
        "shortName": "zephyr"
      },
      "references": [
        {
          "name": "Fix commit",
          "tags": [
            "patch"
          ],
          "url": "https://github.com/zephyrproject-rtos/zephyr/commit/1069b6822ac90da2b9e6dc8a5bbe3873e9f92818"
        },
        {
          "name": "GHSA-36rp-2hcp-f5hv",
          "url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-36rp-2hcp-f5hv"
        }
      ],
      "title": "PL011 UART error interrupts never cleared, enabling an external-peer interrupt-storm denial of service",
      "x_generator": {
        "engine": "cvelib 1.8.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
    "assignerShortName": "zephyr",
    "cveId": "CVE-2026-12629",
    "datePublished": "2026-08-17T16:18:50.322Z",
    "dateReserved": "2026-06-18T15:22:24.098Z",
    "dateUpdated": "2026-08-17T18:27:37.225Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-12236",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-08-13T17:58:20.588519Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-08-13T17:58:32.374Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
          "defaultStatus": "unaffected",
          "packageName": "zephyr",
          "product": "zephyr",
          "programFiles": [
            "subsys/bluetooth/host/gatt.c"
          ],
          "vendor": "zephyrproject",
          "versions": [
            {
              "lessThan": "4.4.2",
              "status": "affected",
              "version": "2.6.0",
              "versionType": "semver"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "The Bluetooth host GATT client function parse_read_std_char_desc() in subsys/bluetooth/host/gatt.c parses an ATT Read By Type Response received from a remote GATT server during BT_GATT_DISCOVER_STD_CHAR_DESC discovery. The per-entry stride rsp-\u003elen is taken directly from the peer\u0027s PDU, and the parse loop both tests its exit condition (length \u003e= rsp-\u003elen) and advances (length -= rsp-\u003elen, pdu += rsp-\u003elen) using that value. The minimum value of rsp-\u003elen was never validated before the loop.\n\nA malicious or malfunctioning peer can reply with rsp-\u003elen = 0. Because length is unsigned and never decreases, the loop condition stays true forever and the read pointer never advances; as long as the body is at least a few bytes with a non-zero handle and a matching descriptor UUID, the host repeatedly re-parses the same bytes and invokes the discovery callback, never terminating. This hangs the Bluetooth host processing thread (CWE-835, loop with unreachable exit condition).\n\nThe condition is reachable by any connected peer once the local device initiates standard-descriptor-value discovery; GATT discovery does not require bonding or encryption, so an unauthenticated adjacent attacker that the device connects to can trigger it. The impact is denial of service of the Bluetooth subsystem (and likely a watchdog reset on constrained targets); there is no memory disclosure or corruption.\n\nThe fix adds a rsp-\u003elen \u003c sizeof(struct bt_att_data) check before the loop, rejecting under-length responses so the stride is always non-zero and the loop terminates. The sibling parsers parse_include() and parse_characteristic() already validated rsp-\u003elen and are unaffected."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "format": "CVSS"
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-835",
              "description": "dos",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-08-13T17:19:58.346Z",
        "orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
        "shortName": "zephyr"
      },
      "references": [
        {
          "name": "Fix commit",
          "tags": [
            "patch"
          ],
          "url": "https://github.com/zephyrproject-rtos/zephyr/commit/494283d469a95b294badaf45c639de433bf5e35a"
        },
        {
          "name": "GHSA-483r-jq2x-5cp9",
          "url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-483r-jq2x-5cp9"
        }
      ],
      "title": "Infinite loop (DoS) in Bluetooth GATT client parsing of Read-By-Type responses with zero data length",
      "x_generator": {
        "engine": "cvelib 1.8.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
    "assignerShortName": "zephyr",
    "cveId": "CVE-2026-12236",
    "datePublished": "2026-08-13T17:19:58.346Z",
    "dateReserved": "2026-06-15T01:56:07.073Z",
    "dateUpdated": "2026-08-13T17:58:32.374Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-11932",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "yes"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-08-14T13:47:29.422899Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-08-14T18:29:20.082Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "cpes": [
            "cpe:2.3:a:ibm:security_verify_access:10.0:*:*:*:*:*:*:*",
            "cpe:2.3:a:ibm:security_verify_access:10.0.0:*:*:*:*:*:*:*",
            "cpe:2.3:a:ibm:security_verify_access:10.0.9.2:*:*:*:*:*:*:*"
          ],
          "product": "Security Verify Access",
          "vendor": "IBM",
          "versions": [
            {
              "lessThanOrEqual": "10.0.9.2",
              "status": "affected",
              "version": "10.0",
              "versionType": "semver"
            }
          ]
        },
        {
          "cpes": [
            "cpe:2.3:a:ibm:verify_identity_access:11.0:*:*:*:*:*:*:*",
            "cpe:2.3:a:ibm:verify_identity_access:11.0.0:*:*:*:*:*:*:*",
            "cpe:2.3:a:ibm:verify_identity_access:11.0.3:*:*:*:*:*:*:*"
          ],
          "product": "Verify Identity Access",
          "vendor": "IBM",
          "versions": [
            {
              "lessThanOrEqual": "11.0.3",
              "status": "affected",
              "version": "11.0",
              "versionType": "semver"
            }
          ]
        },
        {
          "cpes": [
            "cpe:2.3:a:ibm:verify_identity_access_container:11.0:*:*:*:*:*:*:*",
            "cpe:2.3:a:ibm:verify_identity_access_container:11.0.0:*:*:*:*:*:*:*",
            "cpe:2.3:a:ibm:verify_identity_access_container:11.0.3:*:*:*:*:*:*:*"
          ],
          "product": "Verify Identity Access Container",
          "vendor": "IBM",
          "versions": [
            {
              "lessThanOrEqual": "11.0.3",
              "status": "affected",
              "version": "11.0",
              "versionType": "semver"
            }
          ]
        },
        {
          "cpes": [
            "cpe:2.3:a:ibm:security_verify_access_container:10.0:*:*:*:*:*:*:*",
            "cpe:2.3:a:ibm:security_verify_access_container:10.0.0:*:*:*:*:*:*:*",
            "cpe:2.3:a:ibm:security_verify_access_container:10.0.9.2:*:*:*:*:*:*:*"
          ],
          "product": "Security Verify Access Container",
          "vendor": "IBM",
          "versions": [
            {
              "lessThanOrEqual": "10.0.9.2",
              "status": "affected",
              "version": "10.0",
              "versionType": "semver"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "supportingMedia": [
            {
              "base64": false,
              "type": "text/html",
              "value": "\u003cp\u003eIBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 and IBM Verify Identity Access Container 11.0 through 11.0.3  is vulnerable to a denial of service attack.\u003c/p\u003e"
            }
          ],
          "value": "IBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 and IBM Verify Identity Access Container 11.0 through 11.0.3  is vulnerable to a denial of service attack."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "LOW",
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "format": "CVSS",
          "scenarios": [
            {
              "lang": "en",
              "value": "GENERAL"
            }
          ]
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-835",
              "description": "CWE-835 Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-08-12T20:13:39.475Z",
        "orgId": "9a959283-ebb5-44b6-b705-dcc2bbced522",
        "shortName": "ibm"
      },
      "references": [
        {
          "tags": [
            "vendor-advisory",
            "patch"
          ],
          "url": "https://www.ibm.com/support/pages/node/7283079"
        }
      ],
      "solutions": [
        {
          "lang": "en",
          "supportingMedia": [
            {
              "base64": false,
              "type": "text/html",
              "value": "\u003cp\u003e\u003cstrong\u003eIBM encourages customers to update their systems promptly.\u003c/strong\u003e\u003c/p\u003e\u003cp\u003e\u003c/p\u003e\u003cp\u003e\u003cstrong\u003eAppliance:\u003c/strong\u003e\u003c/p\u003e\u003cdiv\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eAffected Products and Versions\u003c/strong\u003e\u003c/p\u003e\u003c/td\u003e\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eFix availability\u003c/strong\u003e\u003c/p\u003e\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd\u003e\u003cp\u003eIBM Verify Identity Access 11.0 - 11.0.3\u003c/p\u003e\u003c/td\u003e\u003ctd\u003e\u003cp\u003e\u003ca href=\"https://www.ibm.com/support/fixcentral/swg/downloadFixes?parent=IBM%20Security\u0026amp;product=ibm/Tivoli/IBM+Verify+Identity+Access\u0026amp;release=All\u0026amp;platform=All\u0026amp;function=fixId\u0026amp;fixids=11.0.3.0-ISS-IVIA-IF0001\" rel=\"nofollow\"\u003eDownload IBM Verify Identity Access v11.0.3 IF1\u003c/a\u003e\u003c/p\u003e\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd\u003e\u003cp\u003eIBM Security Verify Access 10.0.0 - 10.0.9.2\u003c/p\u003e\u003c/td\u003e\u003ctd\u003e\u003cp\u003e\u003ca href=\"https://www.ibm.com/support/fixcentral/swg/downloadFixes?parent=IBM%20Security\u0026amp;product=ibm/Tivoli/IBM+Security+Verify+Access\u0026amp;release=All\u0026amp;platform=All\u0026amp;function=fixId\u0026amp;fixids=10.0.9.2-ISS-ISVA-IF0001\" rel=\"nofollow\"\u003eDownload IBM Security Verify Access v10.0.9.2 IF2\u003c/a\u003e\u003c/p\u003e\u003c/td\u003e\u003c/tr\u003e\u003c/thead\u003e\u003c/table\u003e\u003c/div\u003e\u003cp\u003e\u003c/p\u003e\u003cp\u003e\u003cstrong\u003eContainer:\u003c/strong\u003e\u003c/p\u003e\u003cp\u003e\u003ca href=\"https://docs.verify.ibm.com/ibm-security-verify-access/docs/containers\" rel=\"nofollow\"\u003eContainer Download\u003c/a\u003e\u003c/p\u003e"
            }
          ],
          "value": "IBM encourages customers to update their systems promptly.\n\n\n\n\n\n\n\nAppliance:\n\n\n\nAffected Products and Versions\n\n\n\nFix availability\n\n\n\nIBM Verify Identity Access 11.0 - 11.0.3\n\n\n\n Download IBM Verify Identity Access v11.0.3 IF1 https://www.ibm.com/support/fixcentral/swg/downloadFixes \n\n\n\nIBM Security Verify Access 10.0.0 - 10.0.9.2\n\n\n\n Download IBM Security Verify Access v10.0.9.2 IF2 https://www.ibm.com/support/fixcentral/swg/downloadFixes \n\n\n\n\n\n\n\n\n\nContainer:\n\n\n\n Container Download https://docs.verify.ibm.com/ibm-security-verify-access/docs/containers"
        }
      ],
      "title": "Security vulnerabilities have been found in IBM Verify Identity Access and IBM Security Verify Access"
    }
  },
  "cveMetadata": {
    "assignerOrgId": "9a959283-ebb5-44b6-b705-dcc2bbced522",
    "assignerShortName": "ibm",
    "cveId": "CVE-2026-11932",
    "datePublished": "2026-08-12T20:13:39.475Z",
    "dateReserved": "2026-06-10T18:49:35.291Z",
    "dateUpdated": "2026-08-14T18:29:20.082Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "cvssV3_1": {
              "attackComplexity": "LOW",
              "attackVector": "NETWORK",
              "availabilityImpact": "HIGH",
              "baseScore": 7.5,
              "baseSeverity": "HIGH",
              "confidentialityImpact": "NONE",
              "integrityImpact": "NONE",
              "privilegesRequired": "NONE",
              "scope": "UNCHANGED",
              "userInteraction": "NONE",
              "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
              "version": "3.1"
            }
          },
          {
            "other": {
              "content": {
                "id": "CVE-2026-11352",
                "options": [
                  {
                    "Exploitation": "poc"
                  },
                  {
                    "Automatable": "yes"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-07-06T18:26:03.249042Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-07-06T18:27:49.432Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "references": [
          {
            "tags": [
              "exploit"
            ],
            "url": "https://hackerone.com/reports/3783438"
          }
        ],
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "curl",
          "vendor": "curl",
          "versions": [
            {
              "lessThan": "8.20.1",
              "status": "affected",
              "version": "8.18.0",
              "versionType": "semver"
            }
          ]
        },
        {
          "defaultStatus": "unaffected",
          "product": "curl",
          "repo": "https://github.com/curl/curl.git",
          "vendor": "curl",
          "versions": [
            {
              "lessThan": "56eca2afb4806f1032872fa97d1834b3c1385276",
              "status": "affected",
              "version": "6a3d0b6d631d5e9bec797306b5b41a9f440a088d",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "unaffected",
          "product": "curl",
          "vendor": "curl",
          "versions": [
            {
              "status": "affected",
              "version": "8.20.0"
            },
            {
              "status": "affected",
              "version": "8.19.0"
            },
            {
              "status": "affected",
              "version": "8.18.0"
            }
          ]
        }
      ],
      "credits": [
        {
          "lang": "en",
          "type": "finder",
          "value": "vectorqueue on hackerone (AntAISecurityLab)"
        },
        {
          "lang": "en",
          "type": "remediation developer",
          "value": "Stefan Eissing"
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "An issue in curl\u2019s QUIC UDP receive function allows a malicious HTTP/3 server\nto trigger a remote denial of service against a curl or libcurl client.\nBecause the helper function discards zero-length UDP datagrams before counting\nthem toward the per-call packet budget, a connected QUIC peer can continuously\nstream empty datagrams to indefinitely stall the client."
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-835",
              "description": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-09-15T06:02:38.244Z",
        "orgId": "2499f714-1537-4658-8207-48ae4bb9eae9",
        "shortName": "curl"
      },
      "references": [
        {
          "url": "https://curl.se/docs/CVE-2026-11352.json"
        },
        {
          "url": "https://curl.se/docs/CVE-2026-11352.html"
        },
        {
          "url": "https://hackerone.com/reports/3783438"
        }
      ],
      "title": "QUIC zero-length UDP datagrams busy-loop",
      "x_generator": {
        "engine": "cvelib 1.8.0"
      },
      "x_osv": {
        "affected": [
          {
            "ranges": [
              {
                "events": [
                  {
                    "introduced": "8.18.0"
                  },
                  {
                    "fixed": "8.20.1"
                  }
                ],
                "type": "SEMVER"
              },
              {
                "events": [
                  {
                    "introduced": "6a3d0b6d631d5e9bec797306b5b41a9f440a088d"
                  },
                  {
                    "fixed": "56eca2afb4806f1032872fa97d1834b3c1385276"
                  }
                ],
                "repo": "https://github.com/curl/curl.git",
                "type": "GIT"
              }
            ],
            "versions": [
              "8.20.0",
              "8.19.0",
              "8.18.0"
            ]
          }
        ],
        "aliases": [
          "CVE-2026-11352"
        ],
        "credits": [
          {
            "name": "vectorqueue on hackerone (AntAISecurityLab)",
            "type": "finder"
          },
          {
            "name": "Stefan Eissing",
            "type": "remediation developer"
          }
        ],
        "database_specific": {
          "CWE": {
            "desc": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)",
            "id": "CWE-835"
          },
          "URL": "https://curl.se/docs/CVE-2026-11352.json",
          "affects": "both",
          "issue": "https://hackerone.com/reports/3783438",
          "last_affected": "8.20.0",
          "package": "curl",
          "severity": "Low",
          "www": "https://curl.se/docs/CVE-2026-11352.html"
        },
        "details": "An issue in curl\u2019s QUIC UDP receive function allows a malicious HTTP/3 server\nto trigger a remote denial of service against a curl or libcurl client.\nBecause the helper function discards zero-length UDP datagrams before counting\nthem toward the per-call packet budget, a connected QUIC peer can continuously\nstream empty datagrams to indefinitely stall the client.",
        "id": "CURL-CVE-2026-11352",
        "modified": "2026-09-07T10:34:51.00Z",
        "published": "2026-06-24T08:00:00.00Z",
        "schema_version": "1.5.0",
        "summary": "QUIC zero-length UDP datagrams busy-loop"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "2499f714-1537-4658-8207-48ae4bb9eae9",
    "assignerShortName": "curl",
    "cveId": "CVE-2026-11352",
    "datePublished": "2026-07-03T06:12:10.777Z",
    "dateReserved": "2026-06-05T11:23:43.389Z",
    "dateUpdated": "2026-09-15T06:02:38.244Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-10686",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-07-31T17:24:49.110523Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-07-31T17:30:15.422Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
          "defaultStatus": "unaffected",
          "packageName": "zephyr",
          "product": "zephyr",
          "programFiles": [
            "subsys/net/ip/ipv4.c",
            "subsys/net/ip/ipv6.c",
            "subsys/net/ip/route.c",
            "subsys/net/ip/route_ipv4.c",
            "subsys/net/ip/route_ipv6.c"
          ],
          "vendor": "zephyrproject",
          "versions": [
            {
              "lessThan": "4.5.0",
              "status": "affected",
              "version": "1.8.0",
              "versionType": "semver"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "Zephyr\u0027s IPv6 forwarding path re-sent routed unicast packets without ever decrementing the IPv6 hop limit. Both routing branches of ipv6_route_packet() (subsys/net/ip) were affected: the explicit-route path (net_route_packet()) and the on-link cross-interface path (net_route_packet_if()). Each set the packet forwarding flag and called net_send_data() with the hop limit untouched and no expiry check.\n\nPer RFC 8200 the hop-limit decrement is the mechanism that bounds packet lifetime and terminates routing loops; without it, a device acting as an IPv6 router relays looping packets indefinitely. An on-path attacker who can induce or exploit a transient L3 loop turns it into a permanent forwarding storm, causing CPU/bandwidth resource exhaustion (availability DoS) on the forwarder and adjacent links; path-discovery and loop diagnostics that rely on hop-limit expiry are also defeated.\n\nAffected configurations. In every affected release the forwarding path is reached via CONFIG_NET_ROUTE (enabled by default when CONFIG_NET_IPV6_NBR_CACHE is set), together with CONFIG_NET_ROUTING for cross-interface routing. Note that CONFIG_NET_IPV6_FORWARDING and CONFIG_NET_IPV4_FORWARDING \u2014 which appear in the fix and in this advisory\u0027s evidence notes \u2014 were introduced after v4.4.0, when the routing options were split and renamed; they do not exist in any affected release. When auditing a v4.4.1-or-earlier configuration, look for CONFIG_NET_ROUTE and CONFIG_NET_ROUTING.\n\nIPv4 is not affected in any release. The IPv4 forwarding path (net_route_ipv4_packet() in route_ipv4.c) was added after v4.4.0 and has never shipped in a release. Its TTL decrement and IPv4 header-checksum recomputation landed on main as part of the same fix, so the evidence notes below discuss it, but no released version is reachable by way of IPv4.\n\nAffected releases are v1.8.0 through v4.4.1: v1.8.0 introduced net_route_packet() and v2.2.0 added net_route_packet_if(), and neither decremented the hop limit. v4.3.1 carries the explicit-route fix but not the on-link one, so it is affected as well. Fixed on main by 7d8f1afa7345 (explicit-route path) and 589eadc74efa (on-link path)."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "baseScore": 5.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:L",
            "version": "3.1"
          },
          "format": "CVSS"
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-835",
              "description": "dos",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-07-31T15:49:10.405Z",
        "orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
        "shortName": "zephyr"
      },
      "references": [
        {
          "name": "Fix commit",
          "tags": [
            "patch"
          ],
          "url": "https://github.com/zephyrproject-rtos/zephyr/commit/7d8f1afa7345975b58405d6fba18bb8c3f7cb12a"
        },
        {
          "name": "GHSA-4cg6-6jc4-2r6h",
          "url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-4cg6-6jc4-2r6h"
        }
      ],
      "title": "Missing hop-limit decrement on IPv6 forwarding path allows unbounded packet looping (DoS) in Zephyr routers",
      "x_generator": {
        "engine": "cvelib 1.8.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
    "assignerShortName": "zephyr",
    "cveId": "CVE-2026-10686",
    "datePublished": "2026-07-31T15:49:10.405Z",
    "dateReserved": "2026-06-02T15:26:24.115Z",
    "dateUpdated": "2026-07-31T17:30:15.422Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}