CVE-2026-19061 (GCVE-0-2026-19061)
Vulnerability from cvelistv5 – Published: 2026-08-06 17:00 – Updated: 2026-10-13 12:58 Disputed
VLAI
EPSS
VEX
Title
Insta InstaKNXServiceApp Firmware Update CreateWebClientAndDownloadFileList data authenticity
Summary
A flaw has been found in Insta InstaKNXServiceApp 1.2.3.1469. Affected by this issue is the function CreateWebClientAndDownloadFileList of the component Firmware Update Handler. Executing a manipulation can lead to insufficient verification of data authenticity. It is possible to launch the attack remotely. Attacks of this nature are highly complex. The exploitation is known to be difficult. There are still doubts about whether this vulnerability truly exists. The vendor explains: "[T]he entry suggests that the device does not verify the authenticity of the update. This is incorrect. The device performs an authenticity check after the complete update has been transferred. If this check fails, the update is not installed and the previously installed firmware continues to run".
Severity
SSVC
Exploitation: none
Automatable: no
Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-08-08 02:14 UTC
CWE
- CWE-345 - Insufficient Verification of Data Authenticity
Assigner
References
5 references
| URL | Tags |
|---|---|
| https://vuldb.com/vuln/386531 | vdb-entrytechnical-description |
| https://vuldb.com/vuln/386531/cti | signaturepermissions-required |
| https://vuldb.com/cve/CVE-2026-19061 | third-party-advisory |
| https://vuldb.com/submit/864343 | third-party-advisory |
| https://gist.github.com/isZzzz/f9da7d76cf2f7b93ec… | broken-link |
Impacted products
1 product
| Vendor | Product | Version | CPE status | |
|---|---|---|---|---|
| Insta | InstaKNXServiceApp |
Affected:
1.2.3.1469
cpe:2.3:a:insta:instaknxserviceapp:*:*:*:*:*:*:*:* |
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-19061",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-08-08T02:14:57.365266Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-08-08T02:15:11.480Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"cpes": [
"cpe:2.3:a:insta:instaknxserviceapp:*:*:*:*:*:*:*:*"
],
"modules": [
"Firmware Update Handler"
],
"product": "InstaKNXServiceApp",
"vendor": "Insta",
"versions": [
{
"status": "affected",
"version": "1.2.3.1469"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "reporter",
"value": "isZzzzz (VulDB User)"
},
{
"lang": "en",
"type": "coordinator",
"value": "VulDB CNA Team"
}
],
"descriptions": [
{
"lang": "en",
"value": "A flaw has been found in Insta InstaKNXServiceApp 1.2.3.1469. Affected by this issue is the function CreateWebClientAndDownloadFileList of the component Firmware Update Handler. Executing a manipulation can lead to insufficient verification of data authenticity. It is possible to launch the attack remotely. Attacks of this nature are highly complex. The exploitation is known to be difficult. There are still doubts about whether this vulnerability truly exists. The vendor explains: \"[T]he entry suggests that the device does not verify the authenticity of the update. This is incorrect. The device performs an authenticity check after the complete update has been transferred. If this check fails, the update is not installed and the previously installed firmware continues to run\"."
}
],
"metrics": [
{
"cvssV4_0": {
"baseScore": 6.3,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:4.0/AV:N/AC:H/AT:N/PR:N/UI:N/VC:N/VI:L/VA:N/SC:N/SI:N/SA:N/E:X",
"version": "4.0"
}
},
{
"cvssV3_1": {
"baseScore": 3.7,
"baseSeverity": "LOW",
"vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N/E:X/RL:X/RC:R",
"version": "3.1"
}
},
{
"cvssV3_0": {
"baseScore": 3.7,
"baseSeverity": "LOW",
"vectorString": "CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N/E:X/RL:X/RC:R",
"version": "3.0"
}
},
{
"cvssV2_0": {
"baseScore": 2.6,
"vectorString": "AV:N/AC:H/Au:N/C:N/I:P/A:N/E:ND/RL:ND/RC:UC",
"version": "2.0"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-345",
"description": "Insufficient Verification of Data Authenticity",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-13T12:58:33.068Z",
"orgId": "1af790b2-7ee1-4545-860a-a788eba489b5",
"shortName": "VulDB"
},
"references": [
{
"name": "VDB-386531 | Insta InstaKNXServiceApp Firmware Update CreateWebClientAndDownloadFileList data authenticity",
"tags": [
"vdb-entry",
"technical-description"
],
"url": "https://vuldb.com/vuln/386531"
},
{
"name": "VDB-386531 | CTI Indicators (IOB, IOC, IOA)",
"tags": [
"signature",
"permissions-required"
],
"url": "https://vuldb.com/vuln/386531/cti"
},
{
"name": "CVE-2026-19061 | CVE Analysis and Report",
"tags": [
"third-party-advisory"
],
"url": "https://vuldb.com/cve/CVE-2026-19061"
},
{
"name": "Submit #864343 | Insta GmbH InstaKNXServiceApp_v1.2.3.1469.etsapp v1.2.3.1469 Insufficient Verification of Data Authenticity",
"tags": [
"third-party-advisory"
],
"url": "https://vuldb.com/submit/864343"
},
{
"tags": [
"broken-link"
],
"url": "https://gist.github.com/isZzzz/f9da7d76cf2f7b93ec3f90efe17ed323"
}
],
"tags": [
"disputed"
],
"timeline": [
{
"lang": "en",
"time": "2026-08-06T00:00:00.000Z",
"value": "Advisory disclosed"
},
{
"lang": "en",
"time": "2026-08-06T02:00:00.000Z",
"value": "VulDB entry created"
},
{
"lang": "en",
"time": "2026-10-13T15:02:43.000Z",
"value": "VulDB entry last update"
}
],
"title": "Insta InstaKNXServiceApp Firmware Update CreateWebClientAndDownloadFileList data authenticity",
"x_generator": [
"VulDB PVTS v202610"
]
}
},
"cveMetadata": {
"assignerOrgId": "1af790b2-7ee1-4545-860a-a788eba489b5",
"assignerShortName": "VulDB",
"cveId": "CVE-2026-19061",
"datePublished": "2026-08-06T17:00:09.377Z",
"dateReserved": "2026-08-06T08:29:01.612Z",
"dateUpdated": "2026-10-13T12:58:33.068Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2",
"vulnerability-lookup:meta": {
"epss": {
"cve": "CVE-2026-19061",
"date": "2026-10-27",
"epss": "0.00218",
"percentile": "0.12198"
},
"nvd": {
"cve": {
"affected": [
{
"affectedData": [
{
"cpes": [
"cpe:2.3:a:insta:instaknxserviceapp:*:*:*:*:*:*:*:*"
],
"modules": [
"Firmware Update Handler"
],
"product": "InstaKNXServiceApp",
"vendor": "Insta",
"versions": [
{
"status": "affected",
"version": "1.2.3.1469"
}
]
}
],
"source": "cna@vuldb.com"
}
],
"cveTags": [
{
"sourceIdentifier": "cna@vuldb.com",
"tags": [
"disputed"
]
}
],
"descriptions": [
{
"lang": "en",
"value": "A flaw has been found in Insta InstaKNXServiceApp 1.2.3.1469. Affected by this issue is the function CreateWebClientAndDownloadFileList of the component Firmware Update Handler. Executing a manipulation can lead to insufficient verification of data authenticity. It is possible to launch the attack remotely. Attacks of this nature are highly complex. The exploitation is known to be difficult. There are still doubts about whether this vulnerability truly exists. The vendor explains: \"[T]he entry suggests that the device does not verify the authenticity of the update. This is incorrect. The device performs an authenticity check after the complete update has been transferred. If this check fails, the update is not installed and the previously installed firmware continues to run\"."
}
],
"id": "CVE-2026-19061",
"lastModified": "2026-10-13T13:17:29.827",
"metrics": {
"cvssMetricV2": [
{
"acInsufInfo": false,
"baseSeverity": "LOW",
"cvssData": {
"accessComplexity": "HIGH",
"accessVector": "NETWORK",
"authentication": "NONE",
"availabilityImpact": "NONE",
"baseScore": 2.6,
"confidentialityImpact": "NONE",
"integrityImpact": "PARTIAL",
"vectorString": "AV:N/AC:H/Au:N/C:N/I:P/A:N",
"version": "2.0"
},
"exploitabilityScore": 4.9,
"impactScore": 2.9,
"obtainAllPrivilege": false,
"obtainOtherPrivilege": false,
"obtainUserPrivilege": false,
"source": "cna@vuldb.com",
"type": "Secondary",
"userInteractionRequired": false
}
],
"cvssMetricV31": [
{
"cvssData": {
"attackComplexity": "HIGH",
"attackVector": "NETWORK",
"availabilityImpact": "NONE",
"baseScore": 3.7,
"baseSeverity": "LOW",
"confidentialityImpact": "NONE",
"integrityImpact": "LOW",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N",
"version": "3.1"
},
"exploitabilityScore": 2.2,
"impactScore": 1.4,
"source": "cna@vuldb.com",
"type": "Secondary"
}
],
"cvssMetricV40": [
{
"cvssData": {
"Automatable": "NOT_DEFINED",
"Recovery": "NOT_DEFINED",
"Safety": "NOT_DEFINED",
"attackComplexity": "HIGH",
"attackRequirements": "NONE",
"attackVector": "NETWORK",
"availabilityRequirement": "NOT_DEFINED",
"baseScore": 6.3,
"baseSeverity": "MEDIUM",
"confidentialityRequirement": "NOT_DEFINED",
"exploitMaturity": "NOT_DEFINED",
"integrityRequirement": "NOT_DEFINED",
"modifiedAttackComplexity": "NOT_DEFINED",
"modifiedAttackRequirements": "NOT_DEFINED",
"modifiedAttackVector": "NOT_DEFINED",
"modifiedPrivilegesRequired": "NOT_DEFINED",
"modifiedSubAvailabilityImpact": "NOT_DEFINED",
"modifiedSubConfidentialityImpact": "NOT_DEFINED",
"modifiedSubIntegrityImpact": "NOT_DEFINED",
"modifiedUserInteraction": "NOT_DEFINED",
"modifiedVulnAvailabilityImpact": "NOT_DEFINED",
"modifiedVulnConfidentialityImpact": "NOT_DEFINED",
"modifiedVulnIntegrityImpact": "NOT_DEFINED",
"privilegesRequired": "NONE",
"providerUrgency": "NOT_DEFINED",
"subAvailabilityImpact": "NONE",
"subConfidentialityImpact": "NONE",
"subIntegrityImpact": "NONE",
"userInteraction": "NONE",
"valueDensity": "NOT_DEFINED",
"vectorString": "CVSS:4.0/AV:N/AC:H/AT:N/PR:N/UI:N/VC:N/VI:L/VA:N/SC:N/SI:N/SA:N/E:X/CR:X/IR:X/AR:X/MAV:X/MAC:X/MAT:X/MPR:X/MUI:X/MVC:X/MVI:X/MVA:X/MSC:X/MSI:X/MSA:X/S:X/AU:X/R:X/V:X/RE:X/U:X",
"version": "4.0",
"vulnAvailabilityImpact": "NONE",
"vulnConfidentialityImpact": "NONE",
"vulnIntegrityImpact": "LOW",
"vulnerabilityResponseEffort": "NOT_DEFINED"
},
"source": "cna@vuldb.com",
"type": "Secondary"
}
],
"ssvcV203": [
{
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"ssvcData": {
"id": "CVE-2026-19061",
"options": [
{
"exploitation": "none"
},
{
"automatable": "no"
},
{
"technicalImpact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-08-08T02:14:57.365266Z",
"version": "2.0.3"
}
}
]
},
"published": "2026-08-06T22:16:53.253",
"references": [
{
"source": "cna@vuldb.com",
"url": "https://gist.github.com/isZzzz/f9da7d76cf2f7b93ec3f90efe17ed323"
},
{
"source": "cna@vuldb.com",
"url": "https://vuldb.com/cve/CVE-2026-19061"
},
{
"source": "cna@vuldb.com",
"url": "https://vuldb.com/submit/864343"
},
{
"source": "cna@vuldb.com",
"url": "https://vuldb.com/vuln/386531"
},
{
"source": "cna@vuldb.com",
"url": "https://vuldb.com/vuln/386531/cti"
}
],
"sourceIdentifier": "cna@vuldb.com",
"vulnStatus": "Deferred",
"weaknesses": [
{
"description": [
{
"lang": "en",
"value": "CWE-345"
}
],
"source": "cna@vuldb.com",
"type": "Secondary"
}
]
}
},
"vulnrichment": {
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-19061",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-08-08T02:14:57.365266Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-08-08T02:15:07.074Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"cpes": [
"cpe:2.3:a:insta:instaknxserviceapp:*:*:*:*:*:*:*:*"
],
"modules": [
"Firmware Update Handler"
],
"product": "InstaKNXServiceApp",
"vendor": "Insta",
"versions": [
{
"status": "affected",
"version": "1.2.3.1469"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "reporter",
"value": "isZzzzz (VulDB User)"
},
{
"lang": "en",
"type": "coordinator",
"value": "VulDB CNA Team"
}
],
"descriptions": [
{
"lang": "en",
"value": "A flaw has been found in Insta InstaKNXServiceApp 1.2.3.1469. Affected by this issue is the function CreateWebClientAndDownloadFileList of the component Firmware Update Handler. Executing a manipulation can lead to insufficient verification of data authenticity. It is possible to launch the attack remotely. Attacks of this nature are highly complex. The exploitation is known to be difficult. There are still doubts about whether this vulnerability truly exists. The vendor explains: \"[T]he entry suggests that the device does not verify the authenticity of the update. This is incorrect. The device performs an authenticity check after the complete update has been transferred. If this check fails, the update is not installed and the previously installed firmware continues to run\"."
}
],
"metrics": [
{
"cvssV4_0": {
"baseScore": 6.3,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:4.0/AV:N/AC:H/AT:N/PR:N/UI:N/VC:N/VI:L/VA:N/SC:N/SI:N/SA:N/E:X",
"version": "4.0"
}
},
{
"cvssV3_1": {
"baseScore": 3.7,
"baseSeverity": "LOW",
"vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N/E:X/RL:X/RC:R",
"version": "3.1"
}
},
{
"cvssV3_0": {
"baseScore": 3.7,
"baseSeverity": "LOW",
"vectorString": "CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N/E:X/RL:X/RC:R",
"version": "3.0"
}
},
{
"cvssV2_0": {
"baseScore": 2.6,
"vectorString": "AV:N/AC:H/Au:N/C:N/I:P/A:N/E:ND/RL:ND/RC:UC",
"version": "2.0"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-345",
"description": "Insufficient Verification of Data Authenticity",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-13T12:58:33.068Z",
"orgId": "1af790b2-7ee1-4545-860a-a788eba489b5",
"shortName": "VulDB"
},
"references": [
{
"name": "VDB-386531 | Insta InstaKNXServiceApp Firmware Update CreateWebClientAndDownloadFileList data authenticity",
"tags": [
"vdb-entry",
"technical-description"
],
"url": "https://vuldb.com/vuln/386531"
},
{
"name": "VDB-386531 | CTI Indicators (IOB, IOC, IOA)",
"tags": [
"signature",
"permissions-required"
],
"url": "https://vuldb.com/vuln/386531/cti"
},
{
"name": "CVE-2026-19061 | CVE Analysis and Report",
"tags": [
"third-party-advisory"
],
"url": "https://vuldb.com/cve/CVE-2026-19061"
},
{
"name": "Submit #864343 | Insta GmbH InstaKNXServiceApp_v1.2.3.1469.etsapp v1.2.3.1469 Insufficient Verification of Data Authenticity",
"tags": [
"third-party-advisory"
],
"url": "https://vuldb.com/submit/864343"
},
{
"tags": [
"broken-link"
],
"url": "https://gist.github.com/isZzzz/f9da7d76cf2f7b93ec3f90efe17ed323"
}
],
"tags": [
"disputed"
],
"timeline": [
{
"lang": "en",
"time": "2026-08-06T00:00:00.000Z",
"value": "Advisory disclosed"
},
{
"lang": "en",
"time": "2026-08-06T02:00:00.000Z",
"value": "VulDB entry created"
},
{
"lang": "en",
"time": "2026-10-13T15:02:43.000Z",
"value": "VulDB entry last update"
}
],
"title": "Insta InstaKNXServiceApp Firmware Update CreateWebClientAndDownloadFileList data authenticity",
"x_generator": [
"VulDB PVTS v202610"
]
}
},
"cveMetadata": {
"assignerOrgId": "1af790b2-7ee1-4545-860a-a788eba489b5",
"assignerShortName": "VulDB",
"cveId": "CVE-2026-19061",
"datePublished": "2026-08-06T17:00:09.377Z",
"dateReserved": "2026-08-06T08:29:01.612Z",
"dateUpdated": "2026-10-13T12:58:33.068Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
}
}
Loading…
Loading…
Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline
Sightings and recorded dates, grouped by day · UTC
Loading timeline…
Loading…
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Loading…
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.