CVE-2026-43363 (GCVE-0-2026-43363)

Vulnerability from cvelistv5 – Published: 2026-05-08 14:21 – Updated: 2026-05-11 22:23
VLAI
Title
x86/apic: Disable x2apic on resume if the kernel expects so
Summary
In the Linux kernel, the following vulnerability has been resolved: x86/apic: Disable x2apic on resume if the kernel expects so When resuming from s2ram, firmware may re-enable x2apic mode, which may have been disabled by the kernel during boot either because it doesn't support IRQ remapping or for other reasons. This causes the kernel to continue using the xapic interface, while the hardware is in x2apic mode, which causes hangs. This happens on defconfig + bare metal + s2ram. Fix this in lapic_resume() by disabling x2apic if the kernel expects it to be disabled, i.e. when x2apic_mode = 0. The ACPI v6.6 spec, Section 16.3 [1] says firmware restores either the pre-sleep configuration or initial boot configuration for each CPU, including MSR state: When executing from the power-on reset vector as a result of waking from an S2 or S3 sleep state, the platform firmware performs only the hardware initialization required to restore the system to either the state the platform was in prior to the initial operating system boot, or to the pre-sleep configuration state. In multiprocessor systems, non-boot processors should be placed in the same state as prior to the initial operating system boot. (further ahead) If this is an S2 or S3 wake, then the platform runtime firmware restores minimum context of the system before jumping to the waking vector. This includes: CPU configuration. Platform runtime firmware restores the pre-sleep configuration or initial boot configuration of each CPU (MSR, MTRR, firmware update, SMBase, and so on). Interrupts must be disabled (for IA-32 processors, disabled by CLI instruction). (and other things) So at least as per the spec, re-enablement of x2apic by the firmware is allowed if "x2apic on" is a part of the initial boot configuration. [1] https://uefi.org/specs/ACPI/6.6/16_Waking_and_Sleeping.html#initialization [ bp: Massage. ]
Severity
5.5 (Medium)
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Assigner
Linux CNA under the mitre root
CNA scorecard D 53/100 over 7018 records in the last 180 days details
References
Impacted products
Vendor Product Version CPE status
Linux Linux Affected: 6e1cb38a2aef7680975e71f23de187859ee8b158 , < a6ad6f2e31b524cbb66b2f370bad0cf17d327e6c (git)
Affected: 6e1cb38a2aef7680975e71f23de187859ee8b158 , < 3dd0812a7c764cd8f3b0182441ac22da0a7f3b09 (git)
Affected: 6e1cb38a2aef7680975e71f23de187859ee8b158 , < 965289b120cc68cca886c75219c68b8c15751d73 (git)
Affected: 6e1cb38a2aef7680975e71f23de187859ee8b158 , < f591938072115bf08730b8530c67fab189cc6308 (git)
Affected: 6e1cb38a2aef7680975e71f23de187859ee8b158 , < 1a85f84214f9d790216547ac6086bf8033cd9e5a (git)
Affected: 6e1cb38a2aef7680975e71f23de187859ee8b158 , < 11712c4eb384098db4cb08792e223c818b908c1a (git)
Affected: 6e1cb38a2aef7680975e71f23de187859ee8b158 , < 1d8440c1e7c49715f937416ac90cf260f1f1712c (git)
Affected: 6e1cb38a2aef7680975e71f23de187859ee8b158 , < 8cc7dd77a1466f0ec58c03478b2e735a5b289b96 (git)
guessed Create a notification for this product.
Linux Linux Affected: 2.6.28
Unaffected: 0 , < 2.6.28 (semver)
Unaffected: 5.10.253 , ≤ 5.10.* (semver)
Unaffected: 5.15.203 , ≤ 5.15.* (semver)
Unaffected: 6.1.167 , ≤ 6.1.* (semver)
Unaffected: 6.6.130 , ≤ 6.6.* (semver)
Unaffected: 6.12.78 , ≤ 6.12.* (semver)
Unaffected: 6.18.19 , ≤ 6.18.* (semver)
Unaffected: 6.19.9 , ≤ 6.19.* (semver)
Unaffected: 7.0 , ≤ * (original_commit_for_fix)
guessed Create a notification for this product.
Show details on NVD website
To clipboard 

{
  "containers": {
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "arch/x86/kernel/apic/apic.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "a6ad6f2e31b524cbb66b2f370bad0cf17d327e6c",
              "status": "affected",
              "version": "6e1cb38a2aef7680975e71f23de187859ee8b158",
              "versionType": "git"
            },
            {
              "lessThan": "3dd0812a7c764cd8f3b0182441ac22da0a7f3b09",
              "status": "affected",
              "version": "6e1cb38a2aef7680975e71f23de187859ee8b158",
              "versionType": "git"
            },
            {
              "lessThan": "965289b120cc68cca886c75219c68b8c15751d73",
              "status": "affected",
              "version": "6e1cb38a2aef7680975e71f23de187859ee8b158",
              "versionType": "git"
            },
            {
              "lessThan": "f591938072115bf08730b8530c67fab189cc6308",
              "status": "affected",
              "version": "6e1cb38a2aef7680975e71f23de187859ee8b158",
              "versionType": "git"
            },
            {
              "lessThan": "1a85f84214f9d790216547ac6086bf8033cd9e5a",
              "status": "affected",
              "version": "6e1cb38a2aef7680975e71f23de187859ee8b158",
              "versionType": "git"
            },
            {
              "lessThan": "11712c4eb384098db4cb08792e223c818b908c1a",
              "status": "affected",
              "version": "6e1cb38a2aef7680975e71f23de187859ee8b158",
              "versionType": "git"
            },
            {
              "lessThan": "1d8440c1e7c49715f937416ac90cf260f1f1712c",
              "status": "affected",
              "version": "6e1cb38a2aef7680975e71f23de187859ee8b158",
              "versionType": "git"
            },
            {
              "lessThan": "8cc7dd77a1466f0ec58c03478b2e735a5b289b96",
              "status": "affected",
              "version": "6e1cb38a2aef7680975e71f23de187859ee8b158",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "arch/x86/kernel/apic/apic.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "2.6.28"
            },
            {
              "lessThan": "2.6.28",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.10.*",
              "status": "unaffected",
              "version": "5.10.253",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.15.*",
              "status": "unaffected",
              "version": "5.15.203",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.1.*",
              "status": "unaffected",
              "version": "6.1.167",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.6.*",
              "status": "unaffected",
              "version": "6.6.130",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.12.*",
              "status": "unaffected",
              "version": "6.12.78",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.18.*",
              "status": "unaffected",
              "version": "6.18.19",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.19.*",
              "status": "unaffected",
              "version": "6.19.9",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "7.0",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "5.10.253",
                  "versionStartIncluding": "2.6.28",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "5.15.203",
                  "versionStartIncluding": "2.6.28",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.1.167",
                  "versionStartIncluding": "2.6.28",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.6.130",
                  "versionStartIncluding": "2.6.28",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.12.78",
                  "versionStartIncluding": "2.6.28",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.18.19",
                  "versionStartIncluding": "2.6.28",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.19.9",
                  "versionStartIncluding": "2.6.28",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.0",
                  "versionStartIncluding": "2.6.28",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nx86/apic: Disable x2apic on resume if the kernel expects so\n\nWhen resuming from s2ram, firmware may re-enable x2apic mode, which may have\nbeen disabled by the kernel during boot either because it doesn\u0027t support IRQ\nremapping or for other reasons. This causes the kernel to continue using the\nxapic interface, while the hardware is in x2apic mode, which causes hangs.\nThis happens on defconfig + bare metal + s2ram.\n\nFix this in lapic_resume() by disabling x2apic if the kernel expects it to be\ndisabled, i.e. when x2apic_mode = 0.\n\nThe ACPI v6.6 spec, Section 16.3 [1] says firmware restores either the\npre-sleep configuration or initial boot configuration for each CPU, including\nMSR state:\n\n  When executing from the power-on reset vector as a result of waking from an\n  S2 or S3 sleep state, the platform firmware performs only the hardware\n  initialization required to restore the system to either the state the\n  platform was in prior to the initial operating system boot, or to the\n  pre-sleep configuration state. In multiprocessor systems, non-boot\n  processors should be placed in the same state as prior to the initial\n  operating system boot.\n\n  (further ahead)\n\n  If this is an S2 or S3 wake, then the platform runtime firmware restores\n  minimum context of the system before jumping to the waking vector. This\n  includes:\n\n\tCPU configuration. Platform runtime firmware restores the pre-sleep\n\tconfiguration or initial boot configuration of each CPU (MSR, MTRR,\n\tfirmware update, SMBase, and so on). Interrupts must be disabled (for\n\tIA-32 processors, disabled by CLI instruction).\n\n\t(and other things)\n\nSo at least as per the spec, re-enablement of x2apic by the firmware is\nallowed if \"x2apic on\" is a part of the initial boot configuration.\n\n  [1] https://uefi.org/specs/ACPI/6.6/16_Waking_and_Sleeping.html#initialization\n\n  [ bp: Massage. ]"
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-05-11T22:23:08.290Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/a6ad6f2e31b524cbb66b2f370bad0cf17d327e6c"
        },
        {
          "url": "https://git.kernel.org/stable/c/3dd0812a7c764cd8f3b0182441ac22da0a7f3b09"
        },
        {
          "url": "https://git.kernel.org/stable/c/965289b120cc68cca886c75219c68b8c15751d73"
        },
        {
          "url": "https://git.kernel.org/stable/c/f591938072115bf08730b8530c67fab189cc6308"
        },
        {
          "url": "https://git.kernel.org/stable/c/1a85f84214f9d790216547ac6086bf8033cd9e5a"
        },
        {
          "url": "https://git.kernel.org/stable/c/11712c4eb384098db4cb08792e223c818b908c1a"
        },
        {
          "url": "https://git.kernel.org/stable/c/1d8440c1e7c49715f937416ac90cf260f1f1712c"
        },
        {
          "url": "https://git.kernel.org/stable/c/8cc7dd77a1466f0ec58c03478b2e735a5b289b96"
        }
      ],
      "title": "x86/apic: Disable x2apic on resume if the kernel expects so",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2026-43363",
    "datePublished": "2026-05-08T14:21:16.986Z",
    "dateReserved": "2026-05-01T14:12:56.005Z",
    "dateUpdated": "2026-05-11T22:23:08.290Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2",
  "vulnerability-lookup:meta": {
    "epss": {
      "cve": "CVE-2026-43363",
      "date": "2026-11-01",
      "epss": "0.00123",
      "percentile": "0.02008"
    },
    "nvd": {
      "cve": {
        "affected": [
          {
            "affectedData": [
              {
                "defaultStatus": "unaffected",
                "product": "Linux",
                "programFiles": [
                  "arch/x86/kernel/apic/apic.c"
                ],
                "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
                "vendor": "Linux",
                "versions": [
                  {
                    "lessThan": "a6ad6f2e31b524cbb66b2f370bad0cf17d327e6c",
                    "status": "affected",
                    "version": "6e1cb38a2aef7680975e71f23de187859ee8b158",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "3dd0812a7c764cd8f3b0182441ac22da0a7f3b09",
                    "status": "affected",
                    "version": "6e1cb38a2aef7680975e71f23de187859ee8b158",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "965289b120cc68cca886c75219c68b8c15751d73",
                    "status": "affected",
                    "version": "6e1cb38a2aef7680975e71f23de187859ee8b158",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "f591938072115bf08730b8530c67fab189cc6308",
                    "status": "affected",
                    "version": "6e1cb38a2aef7680975e71f23de187859ee8b158",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "1a85f84214f9d790216547ac6086bf8033cd9e5a",
                    "status": "affected",
                    "version": "6e1cb38a2aef7680975e71f23de187859ee8b158",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "11712c4eb384098db4cb08792e223c818b908c1a",
                    "status": "affected",
                    "version": "6e1cb38a2aef7680975e71f23de187859ee8b158",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "1d8440c1e7c49715f937416ac90cf260f1f1712c",
                    "status": "affected",
                    "version": "6e1cb38a2aef7680975e71f23de187859ee8b158",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "8cc7dd77a1466f0ec58c03478b2e735a5b289b96",
                    "status": "affected",
                    "version": "6e1cb38a2aef7680975e71f23de187859ee8b158",
                    "versionType": "git"
                  }
                ]
              },
              {
                "defaultStatus": "affected",
                "product": "Linux",
                "programFiles": [
                  "arch/x86/kernel/apic/apic.c"
                ],
                "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
                "vendor": "Linux",
                "versions": [
                  {
                    "status": "affected",
                    "version": "2.6.28"
                  },
                  {
                    "lessThan": "2.6.28",
                    "status": "unaffected",
                    "version": "0",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "5.10.*",
                    "status": "unaffected",
                    "version": "5.10.253",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "5.15.*",
                    "status": "unaffected",
                    "version": "5.15.203",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "6.1.*",
                    "status": "unaffected",
                    "version": "6.1.167",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "6.6.*",
                    "status": "unaffected",
                    "version": "6.6.130",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "6.12.*",
                    "status": "unaffected",
                    "version": "6.12.78",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "6.18.*",
                    "status": "unaffected",
                    "version": "6.18.19",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "6.19.*",
                    "status": "unaffected",
                    "version": "6.19.9",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "*",
                    "status": "unaffected",
                    "version": "7.0",
                    "versionType": "original_commit_for_fix"
                  }
                ]
              }
            ],
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
          }
        ],
        "configurations": [
          {
            "nodes": [
              {
                "cpeMatch": [
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                    "matchCriteriaId": "0A43EE99-4349-4EA2-96ED-0546E5FEF5AC",
                    "versionEndExcluding": "5.10.253",
                    "versionStartIncluding": "2.6.28",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                    "matchCriteriaId": "20DDB3E9-AABF-4107-ADB0-5362AA067045",
                    "versionEndExcluding": "5.15.203",
                    "versionStartIncluding": "5.11",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                    "matchCriteriaId": "2EDC6BAF-B710-4E26-B6AA-D68922EE7B43",
                    "versionEndExcluding": "6.1.167",
                    "versionStartIncluding": "5.16",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                    "matchCriteriaId": "C57BB918-DF28-46B3-94F7-144176841267",
                    "versionEndExcluding": "6.6.130",
                    "versionStartIncluding": "6.2",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                    "matchCriteriaId": "28D591F5-B196-4CC9-905C-DC80F116E7A8",
                    "versionEndExcluding": "6.12.78",
                    "versionStartIncluding": "6.7",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                    "matchCriteriaId": "D394AC60-6F28-435F-872A-CCDF384B8331",
                    "versionEndExcluding": "6.18.19",
                    "versionStartIncluding": "6.13",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                    "matchCriteriaId": "E825E7C3-FEAC-4FD3-8A81-78D7387948C9",
                    "versionEndExcluding": "6.19.9",
                    "versionStartIncluding": "6.19",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc1:*:*:*:*:*:*",
                    "matchCriteriaId": "F253B622-8837-4245-BCE5-A7BF8FC76A16",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc2:*:*:*:*:*:*",
                    "matchCriteriaId": "4AE85AD8-4641-4E7C-A2F4-305E2CD9EE64",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc3:*:*:*:*:*:*",
                    "matchCriteriaId": "F666C8D8-6538-46D4-B318-87610DE64C34",
                    "vulnerable": true
                  }
                ],
                "negate": false,
                "operator": "OR"
              }
            ]
          }
        ],
        "cveTags": [],
        "descriptions": [
          {
            "lang": "en",
            "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nx86/apic: Disable x2apic on resume if the kernel expects so\n\nWhen resuming from s2ram, firmware may re-enable x2apic mode, which may have\nbeen disabled by the kernel during boot either because it doesn\u0027t support IRQ\nremapping or for other reasons. This causes the kernel to continue using the\nxapic interface, while the hardware is in x2apic mode, which causes hangs.\nThis happens on defconfig + bare metal + s2ram.\n\nFix this in lapic_resume() by disabling x2apic if the kernel expects it to be\ndisabled, i.e. when x2apic_mode = 0.\n\nThe ACPI v6.6 spec, Section 16.3 [1] says firmware restores either the\npre-sleep configuration or initial boot configuration for each CPU, including\nMSR state:\n\n  When executing from the power-on reset vector as a result of waking from an\n  S2 or S3 sleep state, the platform firmware performs only the hardware\n  initialization required to restore the system to either the state the\n  platform was in prior to the initial operating system boot, or to the\n  pre-sleep configuration state. In multiprocessor systems, non-boot\n  processors should be placed in the same state as prior to the initial\n  operating system boot.\n\n  (further ahead)\n\n  If this is an S2 or S3 wake, then the platform runtime firmware restores\n  minimum context of the system before jumping to the waking vector. This\n  includes:\n\n\tCPU configuration. Platform runtime firmware restores the pre-sleep\n\tconfiguration or initial boot configuration of each CPU (MSR, MTRR,\n\tfirmware update, SMBase, and so on). Interrupts must be disabled (for\n\tIA-32 processors, disabled by CLI instruction).\n\n\t(and other things)\n\nSo at least as per the spec, re-enablement of x2apic by the firmware is\nallowed if \"x2apic on\" is a part of the initial boot configuration.\n\n  [1] https://uefi.org/specs/ACPI/6.6/16_Waking_and_Sleeping.html#initialization\n\n  [ bp: Massage. ]"
          }
        ],
        "id": "CVE-2026-43363",
        "lastModified": "2026-06-17T10:49:27.470",
        "metrics": {
          "cvssMetricV31": [
            {
              "cvssData": {
                "attackComplexity": "LOW",
                "attackVector": "LOCAL",
                "availabilityImpact": "HIGH",
                "baseScore": 5.5,
                "baseSeverity": "MEDIUM",
                "confidentialityImpact": "NONE",
                "integrityImpact": "NONE",
                "privilegesRequired": "LOW",
                "scope": "UNCHANGED",
                "userInteraction": "NONE",
                "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
                "version": "3.1"
              },
              "exploitabilityScore": 1.8,
              "impactScore": 3.6,
              "source": "nvd@nist.gov",
              "type": "Primary"
            }
          ]
        },
        "published": "2026-05-08T15:16:47.247",
        "references": [
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/11712c4eb384098db4cb08792e223c818b908c1a"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/1a85f84214f9d790216547ac6086bf8033cd9e5a"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/1d8440c1e7c49715f937416ac90cf260f1f1712c"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/3dd0812a7c764cd8f3b0182441ac22da0a7f3b09"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/8cc7dd77a1466f0ec58c03478b2e735a5b289b96"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/965289b120cc68cca886c75219c68b8c15751d73"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/a6ad6f2e31b524cbb66b2f370bad0cf17d327e6c"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/f591938072115bf08730b8530c67fab189cc6308"
          }
        ],
        "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "vulnStatus": "Analyzed",
        "weaknesses": [
          {
            "description": [
              {
                "lang": "en",
                "value": "NVD-CWE-noinfo"
              }
            ],
            "source": "nvd@nist.gov",
            "type": "Primary"
          }
        ]
      }
    },
    "redhat_vex": {
      "aggregate_severity": "Moderate",
      "current_release_date": "2026-06-28T07:37:10+00:00",
      "cve": "CVE-2026-43363",
      "id": "CVE-2026-43363",
      "initial_release_date": "2026-05-08T00:00:00+00:00",
      "product_status:known_affected": "274",
      "source": "Red Hat CSAF VEX",
      "status": "final",
      "title": "kernel: x86/apic: Disable x2apic on resume if the kernel expects so",
      "url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-43363.json",
      "version": "3"
    },
    "suse_vex": {
      "aggregate_severity": "moderate",
      "current_release_date": "2026-10-17T00:34:26Z",
      "cve": "CVE-2026-43363",
      "id": "CVE-2026-43363",
      "initial_release_date": "2026-05-13T03:34:53Z",
      "product_status:known_affected": "698",
      "product_status:recommended": "275",
      "source": "SUSE CSAF VEX",
      "status": "interim",
      "title": "SUSE CVE CVE-2026-43363",
      "url": "https://ftp.suse.com/pub/projects/security/csaf-vex/2026/cve-2026-43363.json",
      "version": "11"
    }
  }
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.




Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline

Sightings and recorded dates, grouped by day · UTC

JSON
How durations are calculated

Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.

Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.

Loading timeline…




    Related by attack behaviour

    Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.