CVE-2026-74654 (GCVE-0-2026-74654)

Vulnerability from cvelistv5 – Published: 2026-08-22 15:32 – Updated: 2026-11-06 17:05
VLAI
Title
serial: 8250_dma: Clear stale RX state on shutdown
Summary
In the Linux kernel, the following vulnerability has been resolved: serial: 8250_dma: Clear stale RX state on shutdown serial8250_release_dma() terminates RX DMA and releases the channel, but leaves rx_running set. If the port is closed while an RX transfer is active, the stale state remains while rxchan is NULL until the channel is requested again on the next open. The DesignWare BUSY workaround added by commit a7b9ce39fbe4 ("serial: 8250_dw: Ensure BUSY is deasserted") calls serial8250_rx_dma_flush() from the LCR write path during startup. This happens before serial8250_request_dma() obtains a new RX channel. On reopen, the stale rx_running state therefore makes the flush path pass a NULL channel to dmaengine_pause(), causing a kernel Oops. Clear rx_running after terminating RX DMA, matching the TX cleanup. Also make the flush helper return if the DMA object or RX channel is not available so startup and teardown paths cannot pass a NULL channel to the DMAengine API.
Severity
No CVSS data available.
SSVC
Exploitation: none Automatable: no Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-11-06 17:00 UTC
Assigner
Linux CNA under the mitre root
CNA scorecard D 53/100 over 6641 records in the last 180 days details
References
Impacted products
Vendor Product Version CPE status
Linux Linux Affected: 0fcb7901f9d61a325b4c5b88c600383bcbeb97fe , < bf4fb620e02962b2b52500a4b3d8420f351eb46a (git)
Affected: 0fcb7901f9d61a325b4c5b88c600383bcbeb97fe , < e10f06ee050a08930e2339b6fec7148fd0b2a8f6 (git)
Affected: 0fcb7901f9d61a325b4c5b88c600383bcbeb97fe , < d06cfb1add4a2d5b393e9e31f49ebbd168beea49 (git)
Affected: 0fcb7901f9d61a325b4c5b88c600383bcbeb97fe , < e7a5d792cf64a2096e18f1d573cc3d01cba15e92 (git)
Affected: 0fcb7901f9d61a325b4c5b88c600383bcbeb97fe , < 9f2444f4c0e4b06f61bae38da87c9c94c78efa86 (git)
Affected: 0fcb7901f9d61a325b4c5b88c600383bcbeb97fe , < ae05d9e50b6b9f246c110b3bdc03676145c2d0d4 (git)
Affected: 0fcb7901f9d61a325b4c5b88c600383bcbeb97fe , < e7e3cc6709caa49d1d6ce6c1f7cb305e38675cc9 (git)
Affected: 0fcb7901f9d61a325b4c5b88c600383bcbeb97fe , < e2fe6a0efecbef00e3ecc2db64dd5afa8c212b41 (git)
guessed Create a notification for this product.
Linux Linux Affected: 3.19
Unaffected: 0 , < 3.19 (semver)
Unaffected: 5.10.265 , ≤ 5.10.* (semver)
Unaffected: 5.15.216 , ≤ 5.15.* (semver)
Unaffected: 6.1.183 , ≤ 6.1.* (semver)
Unaffected: 6.6.152 , ≤ 6.6.* (semver)
Unaffected: 6.12.104 , ≤ 6.12.* (semver)
Unaffected: 6.18.45 , ≤ 6.18.* (semver)
Unaffected: 7.1.9 , ≤ 7.1.* (semver)
Unaffected: 7.2 , ≤ * (original_commit_for_fix)
guessed Create a notification for this product.
Show details on NVD website
To clipboard 

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-74654",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-11-06T17:00:25.809181Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-11-06T17:05:49.864Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "drivers/tty/serial/8250/8250_dma.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "bf4fb620e02962b2b52500a4b3d8420f351eb46a",
              "status": "affected",
              "version": "0fcb7901f9d61a325b4c5b88c600383bcbeb97fe",
              "versionType": "git"
            },
            {
              "lessThan": "e10f06ee050a08930e2339b6fec7148fd0b2a8f6",
              "status": "affected",
              "version": "0fcb7901f9d61a325b4c5b88c600383bcbeb97fe",
              "versionType": "git"
            },
            {
              "lessThan": "d06cfb1add4a2d5b393e9e31f49ebbd168beea49",
              "status": "affected",
              "version": "0fcb7901f9d61a325b4c5b88c600383bcbeb97fe",
              "versionType": "git"
            },
            {
              "lessThan": "e7a5d792cf64a2096e18f1d573cc3d01cba15e92",
              "status": "affected",
              "version": "0fcb7901f9d61a325b4c5b88c600383bcbeb97fe",
              "versionType": "git"
            },
            {
              "lessThan": "9f2444f4c0e4b06f61bae38da87c9c94c78efa86",
              "status": "affected",
              "version": "0fcb7901f9d61a325b4c5b88c600383bcbeb97fe",
              "versionType": "git"
            },
            {
              "lessThan": "ae05d9e50b6b9f246c110b3bdc03676145c2d0d4",
              "status": "affected",
              "version": "0fcb7901f9d61a325b4c5b88c600383bcbeb97fe",
              "versionType": "git"
            },
            {
              "lessThan": "e7e3cc6709caa49d1d6ce6c1f7cb305e38675cc9",
              "status": "affected",
              "version": "0fcb7901f9d61a325b4c5b88c600383bcbeb97fe",
              "versionType": "git"
            },
            {
              "lessThan": "e2fe6a0efecbef00e3ecc2db64dd5afa8c212b41",
              "status": "affected",
              "version": "0fcb7901f9d61a325b4c5b88c600383bcbeb97fe",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "drivers/tty/serial/8250/8250_dma.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "3.19"
            },
            {
              "lessThan": "3.19",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.10.*",
              "status": "unaffected",
              "version": "5.10.265",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.15.*",
              "status": "unaffected",
              "version": "5.15.216",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.1.*",
              "status": "unaffected",
              "version": "6.1.183",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.6.*",
              "status": "unaffected",
              "version": "6.6.152",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.12.*",
              "status": "unaffected",
              "version": "6.12.104",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.18.*",
              "status": "unaffected",
              "version": "6.18.45",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "7.1.*",
              "status": "unaffected",
              "version": "7.1.9",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "7.2",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "5.10.265",
                  "versionStartIncluding": "3.19",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "5.15.216",
                  "versionStartIncluding": "3.19",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.1.183",
                  "versionStartIncluding": "3.19",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.6.152",
                  "versionStartIncluding": "3.19",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.12.104",
                  "versionStartIncluding": "3.19",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.18.45",
                  "versionStartIncluding": "3.19",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.1.9",
                  "versionStartIncluding": "3.19",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.2",
                  "versionStartIncluding": "3.19",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nserial: 8250_dma: Clear stale RX state on shutdown\n\nserial8250_release_dma() terminates RX DMA and releases the channel, but\nleaves rx_running set.  If the port is closed while an RX transfer is\nactive, the stale state remains while rxchan is NULL until the channel is\nrequested again on the next open.\n\nThe DesignWare BUSY workaround added by commit a7b9ce39fbe4\n(\"serial: 8250_dw: Ensure BUSY is deasserted\") calls\nserial8250_rx_dma_flush() from the LCR write path during startup.  This\nhappens before serial8250_request_dma() obtains a new RX channel.  On\nreopen, the stale rx_running state therefore makes the flush path pass a\nNULL channel to dmaengine_pause(), causing a kernel Oops.\n\nClear rx_running after terminating RX DMA, matching the TX cleanup.  Also\nmake the flush helper return if the DMA object or RX channel is not\navailable so startup and teardown paths cannot pass a NULL channel to the\nDMAengine API."
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-08-22T15:32:29.263Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/bf4fb620e02962b2b52500a4b3d8420f351eb46a"
        },
        {
          "url": "https://git.kernel.org/stable/c/e10f06ee050a08930e2339b6fec7148fd0b2a8f6"
        },
        {
          "url": "https://git.kernel.org/stable/c/d06cfb1add4a2d5b393e9e31f49ebbd168beea49"
        },
        {
          "url": "https://git.kernel.org/stable/c/e7a5d792cf64a2096e18f1d573cc3d01cba15e92"
        },
        {
          "url": "https://git.kernel.org/stable/c/9f2444f4c0e4b06f61bae38da87c9c94c78efa86"
        },
        {
          "url": "https://git.kernel.org/stable/c/ae05d9e50b6b9f246c110b3bdc03676145c2d0d4"
        },
        {
          "url": "https://git.kernel.org/stable/c/e7e3cc6709caa49d1d6ce6c1f7cb305e38675cc9"
        },
        {
          "url": "https://git.kernel.org/stable/c/e2fe6a0efecbef00e3ecc2db64dd5afa8c212b41"
        }
      ],
      "title": "serial: 8250_dma: Clear stale RX state on shutdown",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2026-74654",
    "datePublished": "2026-08-22T15:32:29.263Z",
    "dateReserved": "2026-08-15T05:44:03.923Z",
    "dateUpdated": "2026-11-06T17:05:49.864Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2",
  "vulnerability-lookup:meta": {
    "epss": {
      "cve": "CVE-2026-74654",
      "date": "2026-11-14",
      "epss": "0.00177",
      "percentile": "0.07298"
    },
    "microsoft_vex": {
      "current_release_date": "2026-09-25T02:24:24.000Z",
      "cve": "CVE-2026-74654",
      "id": "msrc_CVE-2026-74654",
      "initial_release_date": "2026-08-24T01:01:30.000Z",
      "product_status:fixed": "1",
      "product_status:known_affected": "1",
      "source": "Microsoft CSAF VEX",
      "status": "final",
      "title": "serial: 8250_dma: Clear stale RX state on shutdown",
      "url": "https://msrc.microsoft.com/csaf/vex/2026/msrc_cve-2026-74654.json",
      "version": "4"
    },
    "nvd": {
      "cve": {
        "affected": [
          {
            "affectedData": [
              {
                "defaultStatus": "unaffected",
                "product": "Linux",
                "programFiles": [
                  "drivers/tty/serial/8250/8250_dma.c"
                ],
                "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
                "vendor": "Linux",
                "versions": [
                  {
                    "lessThan": "bf4fb620e02962b2b52500a4b3d8420f351eb46a",
                    "status": "affected",
                    "version": "0fcb7901f9d61a325b4c5b88c600383bcbeb97fe",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "e10f06ee050a08930e2339b6fec7148fd0b2a8f6",
                    "status": "affected",
                    "version": "0fcb7901f9d61a325b4c5b88c600383bcbeb97fe",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "d06cfb1add4a2d5b393e9e31f49ebbd168beea49",
                    "status": "affected",
                    "version": "0fcb7901f9d61a325b4c5b88c600383bcbeb97fe",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "e7a5d792cf64a2096e18f1d573cc3d01cba15e92",
                    "status": "affected",
                    "version": "0fcb7901f9d61a325b4c5b88c600383bcbeb97fe",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "9f2444f4c0e4b06f61bae38da87c9c94c78efa86",
                    "status": "affected",
                    "version": "0fcb7901f9d61a325b4c5b88c600383bcbeb97fe",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "ae05d9e50b6b9f246c110b3bdc03676145c2d0d4",
                    "status": "affected",
                    "version": "0fcb7901f9d61a325b4c5b88c600383bcbeb97fe",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "e7e3cc6709caa49d1d6ce6c1f7cb305e38675cc9",
                    "status": "affected",
                    "version": "0fcb7901f9d61a325b4c5b88c600383bcbeb97fe",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "e2fe6a0efecbef00e3ecc2db64dd5afa8c212b41",
                    "status": "affected",
                    "version": "0fcb7901f9d61a325b4c5b88c600383bcbeb97fe",
                    "versionType": "git"
                  }
                ]
              },
              {
                "defaultStatus": "affected",
                "product": "Linux",
                "programFiles": [
                  "drivers/tty/serial/8250/8250_dma.c"
                ],
                "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
                "vendor": "Linux",
                "versions": [
                  {
                    "status": "affected",
                    "version": "3.19"
                  },
                  {
                    "lessThan": "3.19",
                    "status": "unaffected",
                    "version": "0",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "5.10.*",
                    "status": "unaffected",
                    "version": "5.10.265",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "5.15.*",
                    "status": "unaffected",
                    "version": "5.15.216",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "6.1.*",
                    "status": "unaffected",
                    "version": "6.1.183",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "6.6.*",
                    "status": "unaffected",
                    "version": "6.6.152",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "6.12.*",
                    "status": "unaffected",
                    "version": "6.12.104",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "6.18.*",
                    "status": "unaffected",
                    "version": "6.18.45",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "7.1.*",
                    "status": "unaffected",
                    "version": "7.1.9",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "*",
                    "status": "unaffected",
                    "version": "7.2",
                    "versionType": "original_commit_for_fix"
                  }
                ]
              }
            ],
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
          }
        ],
        "cveTags": [],
        "descriptions": [
          {
            "lang": "en",
            "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nserial: 8250_dma: Clear stale RX state on shutdown\n\nserial8250_release_dma() terminates RX DMA and releases the channel, but\nleaves rx_running set.  If the port is closed while an RX transfer is\nactive, the stale state remains while rxchan is NULL until the channel is\nrequested again on the next open.\n\nThe DesignWare BUSY workaround added by commit a7b9ce39fbe4\n(\"serial: 8250_dw: Ensure BUSY is deasserted\") calls\nserial8250_rx_dma_flush() from the LCR write path during startup.  This\nhappens before serial8250_request_dma() obtains a new RX channel.  On\nreopen, the stale rx_running state therefore makes the flush path pass a\nNULL channel to dmaengine_pause(), causing a kernel Oops.\n\nClear rx_running after terminating RX DMA, matching the TX cleanup.  Also\nmake the flush helper return if the DMA object or RX channel is not\navailable so startup and teardown paths cannot pass a NULL channel to the\nDMAengine API."
          },
          {
            "lang": "es",
            "value": "En el kernel de Linux, la siguiente vulnerabilidad ha sido resuelta:\n\nserial: 8250_dma: Borrar estado RX obsoleto al apagarse\n\nserial8250_release_dma() termina el DMA RX y libera el canal, pero deja rx_running establecido. Si el puerto se cierra mientras una transferencia RX est\u00e1 activa, el estado obsoleto permanece mientras rxchan es NULL hasta que el canal es solicitado de nuevo en la siguiente apertura.\n\nLa soluci\u00f3n alternativa DesignWare BUSY a\u00f1adida por el commit a7b9ce39fbe4 (\u0027serial: 8250_dw: Ensure BUSY is deasserted\u0027) llama a serial8250_rx_dma_flush() desde la ruta de escritura LCR durante el inicio. Esto ocurre antes de que serial8250_request_dma() obtenga un nuevo canal RX. Al reabrir, el estado rx_running obsoleto, por lo tanto, hace que la ruta de vaciado pase un canal NULL a dmaengine_pause(), causando un Oops del kernel.\n\nBorrar rx_running despu\u00e9s de terminar el DMA RX, coincidiendo con la limpieza TX. Tambi\u00e9n hacer que la funci\u00f3n auxiliar de vaciado retorne si el objeto DMA o el canal RX no est\u00e1 disponible para que las rutas de inicio y de desmontaje no puedan pasar un canal NULL a la API de DMAengine."
          }
        ],
        "id": "CVE-2026-74654",
        "lastModified": "2026-11-06T17:19:52.583",
        "metrics": {
          "ssvcV203": [
            {
              "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
              "ssvcData": {
                "id": "CVE-2026-74654",
                "options": [
                  {
                    "exploitation": "none"
                  },
                  {
                    "automatable": "no"
                  },
                  {
                    "technicalImpact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-11-06T17:00:25.809181Z",
                "version": "2.0.3"
              }
            }
          ]
        },
        "published": "2026-08-22T16:16:38.937",
        "references": [
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "url": "https://git.kernel.org/stable/c/9f2444f4c0e4b06f61bae38da87c9c94c78efa86"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "url": "https://git.kernel.org/stable/c/ae05d9e50b6b9f246c110b3bdc03676145c2d0d4"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "url": "https://git.kernel.org/stable/c/bf4fb620e02962b2b52500a4b3d8420f351eb46a"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "url": "https://git.kernel.org/stable/c/d06cfb1add4a2d5b393e9e31f49ebbd168beea49"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "url": "https://git.kernel.org/stable/c/e10f06ee050a08930e2339b6fec7148fd0b2a8f6"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "url": "https://git.kernel.org/stable/c/e2fe6a0efecbef00e3ecc2db64dd5afa8c212b41"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "url": "https://git.kernel.org/stable/c/e7a5d792cf64a2096e18f1d573cc3d01cba15e92"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "url": "https://git.kernel.org/stable/c/e7e3cc6709caa49d1d6ce6c1f7cb305e38675cc9"
          }
        ],
        "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "vulnStatus": "Received"
      }
    },
    "redhat_vex": {
      "aggregate_severity": "Low",
      "current_release_date": "2026-11-07T11:25:04+00:00",
      "cve": "CVE-2026-74654",
      "id": "CVE-2026-74654",
      "initial_release_date": "2026-08-22T00:00:00+00:00",
      "product_status:known_affected": "158",
      "product_status:known_not_affected": "42",
      "source": "Red Hat CSAF VEX",
      "status": "final",
      "title": "kernel: serial: 8250_dma: Clear stale RX state on shutdown",
      "url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-74654.json",
      "version": "3"
    },
    "suse_vex": {
      "aggregate_severity": "moderate",
      "current_release_date": "2026-11-14T02:04:03Z",
      "cve": "CVE-2026-74654",
      "id": "CVE-2026-74654",
      "initial_release_date": "2026-08-23T00:05:10Z",
      "product_status:known_affected": "679",
      "product_status:known_not_affected": "64",
      "product_status:recommended": "313",
      "source": "SUSE CSAF VEX",
      "status": "interim",
      "title": "SUSE CVE CVE-2026-74654",
      "url": "https://ftp.suse.com/pub/projects/security/csaf-vex/2026/cve-2026-74654.json",
      "version": "12"
    },
    "vulnrichment": {
      "containers": {
        "adp": [
          {
            "metrics": [
              {
                "other": {
                  "content": {
                    "id": "CVE-2026-74654",
                    "options": [
                      {
                        "Exploitation": "none"
                      },
                      {
                        "Automatable": "no"
                      },
                      {
                        "Technical Impact": "partial"
                      }
                    ],
                    "role": "CISA Coordinator",
                    "timestamp": "2026-11-06T17:00:25.809181Z",
                    "version": "2.0.3"
                  },
                  "type": "ssvc"
                }
              }
            ],
            "providerMetadata": {
              "dateUpdated": "2026-11-06T17:00:26.802Z",
              "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
              "shortName": "CISA-ADP"
            },
            "title": "CISA ADP Vulnrichment"
          }
        ],
        "cna": {
          "affected": [
            {
              "defaultStatus": "unaffected",
              "product": "Linux",
              "programFiles": [
                "drivers/tty/serial/8250/8250_dma.c"
              ],
              "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
              "vendor": "Linux",
              "versions": [
                {
                  "lessThan": "bf4fb620e02962b2b52500a4b3d8420f351eb46a",
                  "status": "affected",
                  "version": "0fcb7901f9d61a325b4c5b88c600383bcbeb97fe",
                  "versionType": "git"
                },
                {
                  "lessThan": "e10f06ee050a08930e2339b6fec7148fd0b2a8f6",
                  "status": "affected",
                  "version": "0fcb7901f9d61a325b4c5b88c600383bcbeb97fe",
                  "versionType": "git"
                },
                {
                  "lessThan": "d06cfb1add4a2d5b393e9e31f49ebbd168beea49",
                  "status": "affected",
                  "version": "0fcb7901f9d61a325b4c5b88c600383bcbeb97fe",
                  "versionType": "git"
                },
                {
                  "lessThan": "e7a5d792cf64a2096e18f1d573cc3d01cba15e92",
                  "status": "affected",
                  "version": "0fcb7901f9d61a325b4c5b88c600383bcbeb97fe",
                  "versionType": "git"
                },
                {
                  "lessThan": "9f2444f4c0e4b06f61bae38da87c9c94c78efa86",
                  "status": "affected",
                  "version": "0fcb7901f9d61a325b4c5b88c600383bcbeb97fe",
                  "versionType": "git"
                },
                {
                  "lessThan": "ae05d9e50b6b9f246c110b3bdc03676145c2d0d4",
                  "status": "affected",
                  "version": "0fcb7901f9d61a325b4c5b88c600383bcbeb97fe",
                  "versionType": "git"
                },
                {
                  "lessThan": "e7e3cc6709caa49d1d6ce6c1f7cb305e38675cc9",
                  "status": "affected",
                  "version": "0fcb7901f9d61a325b4c5b88c600383bcbeb97fe",
                  "versionType": "git"
                },
                {
                  "lessThan": "e2fe6a0efecbef00e3ecc2db64dd5afa8c212b41",
                  "status": "affected",
                  "version": "0fcb7901f9d61a325b4c5b88c600383bcbeb97fe",
                  "versionType": "git"
                }
              ]
            },
            {
              "defaultStatus": "affected",
              "product": "Linux",
              "programFiles": [
                "drivers/tty/serial/8250/8250_dma.c"
              ],
              "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
              "vendor": "Linux",
              "versions": [
                {
                  "status": "affected",
                  "version": "3.19"
                },
                {
                  "lessThan": "3.19",
                  "status": "unaffected",
                  "version": "0",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "5.10.*",
                  "status": "unaffected",
                  "version": "5.10.265",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "5.15.*",
                  "status": "unaffected",
                  "version": "5.15.216",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "6.1.*",
                  "status": "unaffected",
                  "version": "6.1.183",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "6.6.*",
                  "status": "unaffected",
                  "version": "6.6.152",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "6.12.*",
                  "status": "unaffected",
                  "version": "6.12.104",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "6.18.*",
                  "status": "unaffected",
                  "version": "6.18.45",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "7.1.*",
                  "status": "unaffected",
                  "version": "7.1.9",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "*",
                  "status": "unaffected",
                  "version": "7.2",
                  "versionType": "original_commit_for_fix"
                }
              ]
            }
          ],
          "cpeApplicability": [
            {
              "nodes": [
                {
                  "cpeMatch": [
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "5.10.265",
                      "versionStartIncluding": "3.19",
                      "vulnerable": true
                    },
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "5.15.216",
                      "versionStartIncluding": "3.19",
                      "vulnerable": true
                    },
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "6.1.183",
                      "versionStartIncluding": "3.19",
                      "vulnerable": true
                    },
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "6.6.152",
                      "versionStartIncluding": "3.19",
                      "vulnerable": true
                    },
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "6.12.104",
                      "versionStartIncluding": "3.19",
                      "vulnerable": true
                    },
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "6.18.45",
                      "versionStartIncluding": "3.19",
                      "vulnerable": true
                    },
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "7.1.9",
                      "versionStartIncluding": "3.19",
                      "vulnerable": true
                    },
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "7.2",
                      "versionStartIncluding": "3.19",
                      "vulnerable": true
                    }
                  ],
                  "negate": false,
                  "operator": "OR"
                }
              ]
            }
          ],
          "descriptions": [
            {
              "lang": "en",
              "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nserial: 8250_dma: Clear stale RX state on shutdown\n\nserial8250_release_dma() terminates RX DMA and releases the channel, but\nleaves rx_running set.  If the port is closed while an RX transfer is\nactive, the stale state remains while rxchan is NULL until the channel is\nrequested again on the next open.\n\nThe DesignWare BUSY workaround added by commit a7b9ce39fbe4\n(\"serial: 8250_dw: Ensure BUSY is deasserted\") calls\nserial8250_rx_dma_flush() from the LCR write path during startup.  This\nhappens before serial8250_request_dma() obtains a new RX channel.  On\nreopen, the stale rx_running state therefore makes the flush path pass a\nNULL channel to dmaengine_pause(), causing a kernel Oops.\n\nClear rx_running after terminating RX DMA, matching the TX cleanup.  Also\nmake the flush helper return if the DMA object or RX channel is not\navailable so startup and teardown paths cannot pass a NULL channel to the\nDMAengine API."
            }
          ],
          "providerMetadata": {
            "dateUpdated": "2026-08-22T15:32:29.263Z",
            "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "shortName": "Linux"
          },
          "references": [
            {
              "url": "https://git.kernel.org/stable/c/bf4fb620e02962b2b52500a4b3d8420f351eb46a"
            },
            {
              "url": "https://git.kernel.org/stable/c/e10f06ee050a08930e2339b6fec7148fd0b2a8f6"
            },
            {
              "url": "https://git.kernel.org/stable/c/d06cfb1add4a2d5b393e9e31f49ebbd168beea49"
            },
            {
              "url": "https://git.kernel.org/stable/c/e7a5d792cf64a2096e18f1d573cc3d01cba15e92"
            },
            {
              "url": "https://git.kernel.org/stable/c/9f2444f4c0e4b06f61bae38da87c9c94c78efa86"
            },
            {
              "url": "https://git.kernel.org/stable/c/ae05d9e50b6b9f246c110b3bdc03676145c2d0d4"
            },
            {
              "url": "https://git.kernel.org/stable/c/e7e3cc6709caa49d1d6ce6c1f7cb305e38675cc9"
            },
            {
              "url": "https://git.kernel.org/stable/c/e2fe6a0efecbef00e3ecc2db64dd5afa8c212b41"
            }
          ],
          "title": "serial: 8250_dma: Clear stale RX state on shutdown",
          "x_generator": {
            "engine": "bippy-1.2.0"
          }
        }
      },
      "cveMetadata": {
        "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "assignerShortName": "Linux",
        "cveId": "CVE-2026-74654",
        "datePublished": "2026-08-22T15:32:29.263Z",
        "dateReserved": "2026-08-15T05:44:03.923Z",
        "dateUpdated": "2026-11-06T17:05:49.864Z",
        "state": "PUBLISHED"
      },
      "dataType": "CVE_RECORD",
      "dataVersion": "5.2"
    }
  }
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.




Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline

Sightings and recorded dates, grouped by day · UTC

JSON
How durations are calculated

Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.

Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.

Loading timeline…




    Related by attack behaviour

    Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.