CVE-2026-99578 (GCVE-0-2026-99578)

Vulnerability from cvelistv5 – Published: 2026-11-20 05:49 – Updated: 2026-11-20 05:49
VLAI
Title
wifi: rtw88: usb: route bmc frames via the high queue only for DTIM delivery
Summary
In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: usb: route bmc frames via the high queue only for DTIM delivery In AP mode every broadcast and multicast data frame is routed to TX_DESC_QSEL_HIGH, the after-DTIM queue, whether or not anybody is asleep. The firmware drains that queue at beacon pace, a dozen or so frames per second measured on RTL8822BU, while one associated client's mDNS/SSDP chatter alone exceeds that. The excess accumulates inside the chip until the shared TX page pool is exhausted (measured: 14 of 1803 pages left). From that point every host-sourced frame queues behind the backlog: authentication responses reach the air seconds after the client has given up, so no station can associate anymore, and the beacon reserved-page download fails the BCN_VALID poll ("error beacon valid") because it needs pages from the same pool. The AP keeps beaconing, so the failure looks like a silent RX stall and only a reboot recovers. mac80211 already decides when after-DTIM delivery is needed: it sets IEEE80211_TX_CTL_SEND_AFTER_DTIM on bmc frames only while at least one station is actually dozing. Honor that instead of routing unconditionally: flagged frames keep going through the high queue with the MORE_DATA and HGQMD handling introduced by commit 076f786a0ae1 ("wifi: rtw88: Fix AP mode incorrect DTIM behavior"), everything else leaves at line rate through the AC queues. This partially reverts the usb.c hunk of that commit, whose unconditional routing is what lets the backlog build up. On a bench AP (USB2, 20 MHz, WPA2, hostapd, a Windows client driven through disconnect/reconnect cycles): reconnects fail 0/5 on RTL8822BU and 0/3 on RTL8821CU before this change, and pass 10/10 and 5/5 with it, with the page pool staying healthy and no beacon errors logged.
Severity
No CVSS data available.
Assigner
Linux CNA under the mitre root
CNA scorecard D 53/100 over 7143 records in the last 180 days details
Impacted products
Vendor Product Version CPE status
Linux Linux Affected: 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 , < 8da3a71216a0ecd02980dff5cf9739376249fc72 (git)
Affected: 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 , < aa383c35d3e3688da8da0993f751c7b4bab66b02 (git)
Affected: 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 , < 781af5ab5a848b3c0767c0f057bd6692e3b7c17e (git)
Affected: 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 , < c710c7c2e0380d7c0eeb33b686262edcaef7cb07 (git)
Affected: 0 , < 6.12.118 (semver)
Affected: 0 , < 6.18.64 (semver)
Affected: 0 , < 7.3.5 (semver)
guessed Create a notification for this product.
Linux Linux Unaffected: 6.12.118 , ≤ 6.12.* (semver)
Unaffected: 6.18.64 , ≤ 6.18.* (semver)
Unaffected: 7.3.5 , ≤ 7.3.* (semver)
Unaffected: 7.4-rc1 , ≤ * (original_commit_for_fix)
guessed Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "drivers/net/wireless/realtek/rtw88/usb.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "8da3a71216a0ecd02980dff5cf9739376249fc72",
              "status": "affected",
              "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
              "versionType": "git"
            },
            {
              "lessThan": "aa383c35d3e3688da8da0993f751c7b4bab66b02",
              "status": "affected",
              "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
              "versionType": "git"
            },
            {
              "lessThan": "781af5ab5a848b3c0767c0f057bd6692e3b7c17e",
              "status": "affected",
              "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
              "versionType": "git"
            },
            {
              "lessThan": "c710c7c2e0380d7c0eeb33b686262edcaef7cb07",
              "status": "affected",
              "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
              "versionType": "git"
            },
            {
              "lessThan": "6.12.118",
              "status": "affected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThan": "6.18.64",
              "status": "affected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThan": "7.3.5",
              "status": "affected",
              "version": "0",
              "versionType": "semver"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "drivers/net/wireless/realtek/rtw88/usb.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThanOrEqual": "6.12.*",
              "status": "unaffected",
              "version": "6.12.118",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.18.*",
              "status": "unaffected",
              "version": "6.18.64",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "7.3.*",
              "status": "unaffected",
              "version": "7.3.5",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "7.4-rc1",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.12.118",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.18.64",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.3.5",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.4-rc1",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nwifi: rtw88: usb: route bmc frames via the high queue only for DTIM delivery\n\nIn AP mode every broadcast and multicast data frame is routed to\nTX_DESC_QSEL_HIGH, the after-DTIM queue, whether or not anybody is\nasleep. The firmware drains that queue at beacon pace, a dozen or so\nframes per second measured on RTL8822BU, while one associated client\u0027s\nmDNS/SSDP chatter alone exceeds that. The excess accumulates inside\nthe chip until the shared TX page pool is exhausted (measured: 14 of\n1803 pages left). From that point every host-sourced frame queues\nbehind the backlog: authentication responses reach the air seconds\nafter the client has given up, so no station can associate anymore,\nand the beacon reserved-page download fails the BCN_VALID poll\n(\"error beacon valid\") because it needs pages from the same pool. The\nAP keeps beaconing, so the failure looks like a silent RX stall and\nonly a reboot recovers.\n\nmac80211 already decides when after-DTIM delivery is needed: it sets\nIEEE80211_TX_CTL_SEND_AFTER_DTIM on bmc frames only while at least one\nstation is actually dozing. Honor that instead of routing\nunconditionally: flagged frames keep going through the high queue with\nthe MORE_DATA and HGQMD handling introduced by commit 076f786a0ae1\n(\"wifi: rtw88: Fix AP mode incorrect DTIM behavior\"), everything else\nleaves at line rate through the AC queues. This partially reverts the\nusb.c hunk of that commit, whose unconditional routing is what lets\nthe backlog build up.\n\nOn a bench AP (USB2, 20 MHz, WPA2, hostapd, a Windows client driven\nthrough disconnect/reconnect cycles): reconnects fail 0/5 on RTL8822BU\nand 0/3 on RTL8821CU before this change, and pass 10/10 and 5/5 with\nit, with the page pool staying healthy and no beacon errors logged."
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-11-20T05:49:10.728Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/8da3a71216a0ecd02980dff5cf9739376249fc72"
        },
        {
          "url": "https://git.kernel.org/stable/c/aa383c35d3e3688da8da0993f751c7b4bab66b02"
        },
        {
          "url": "https://git.kernel.org/stable/c/781af5ab5a848b3c0767c0f057bd6692e3b7c17e"
        },
        {
          "url": "https://git.kernel.org/stable/c/c710c7c2e0380d7c0eeb33b686262edcaef7cb07"
        }
      ],
      "title": "wifi: rtw88: usb: route bmc frames via the high queue only for DTIM delivery",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2026-99578",
    "datePublished": "2026-11-20T05:49:10.728Z",
    "dateReserved": "2026-09-25T10:25:14.423Z",
    "dateUpdated": "2026-11-20T05:49:10.728Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2",
  "vulnerability-lookup:meta": {
    "nvd": {
      "cve": {
        "affected": [
          {
            "affectedData": [
              {
                "defaultStatus": "unaffected",
                "product": "Linux",
                "programFiles": [
                  "drivers/net/wireless/realtek/rtw88/usb.c"
                ],
                "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
                "vendor": "Linux",
                "versions": [
                  {
                    "lessThan": "8da3a71216a0ecd02980dff5cf9739376249fc72",
                    "status": "affected",
                    "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "aa383c35d3e3688da8da0993f751c7b4bab66b02",
                    "status": "affected",
                    "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "781af5ab5a848b3c0767c0f057bd6692e3b7c17e",
                    "status": "affected",
                    "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "c710c7c2e0380d7c0eeb33b686262edcaef7cb07",
                    "status": "affected",
                    "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "6.12.118",
                    "status": "affected",
                    "version": "0",
                    "versionType": "semver"
                  },
                  {
                    "lessThan": "6.18.64",
                    "status": "affected",
                    "version": "0",
                    "versionType": "semver"
                  },
                  {
                    "lessThan": "7.3.5",
                    "status": "affected",
                    "version": "0",
                    "versionType": "semver"
                  }
                ]
              },
              {
                "defaultStatus": "affected",
                "product": "Linux",
                "programFiles": [
                  "drivers/net/wireless/realtek/rtw88/usb.c"
                ],
                "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
                "vendor": "Linux",
                "versions": [
                  {
                    "lessThanOrEqual": "6.12.*",
                    "status": "unaffected",
                    "version": "6.12.118",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "6.18.*",
                    "status": "unaffected",
                    "version": "6.18.64",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "7.3.*",
                    "status": "unaffected",
                    "version": "7.3.5",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "*",
                    "status": "unaffected",
                    "version": "7.4-rc1",
                    "versionType": "original_commit_for_fix"
                  }
                ]
              }
            ],
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
          }
        ],
        "cveTags": [],
        "descriptions": [
          {
            "lang": "en",
            "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nwifi: rtw88: usb: route bmc frames via the high queue only for DTIM delivery\n\nIn AP mode every broadcast and multicast data frame is routed to\nTX_DESC_QSEL_HIGH, the after-DTIM queue, whether or not anybody is\nasleep. The firmware drains that queue at beacon pace, a dozen or so\nframes per second measured on RTL8822BU, while one associated client\u0027s\nmDNS/SSDP chatter alone exceeds that. The excess accumulates inside\nthe chip until the shared TX page pool is exhausted (measured: 14 of\n1803 pages left). From that point every host-sourced frame queues\nbehind the backlog: authentication responses reach the air seconds\nafter the client has given up, so no station can associate anymore,\nand the beacon reserved-page download fails the BCN_VALID poll\n(\"error beacon valid\") because it needs pages from the same pool. The\nAP keeps beaconing, so the failure looks like a silent RX stall and\nonly a reboot recovers.\n\nmac80211 already decides when after-DTIM delivery is needed: it sets\nIEEE80211_TX_CTL_SEND_AFTER_DTIM on bmc frames only while at least one\nstation is actually dozing. Honor that instead of routing\nunconditionally: flagged frames keep going through the high queue with\nthe MORE_DATA and HGQMD handling introduced by commit 076f786a0ae1\n(\"wifi: rtw88: Fix AP mode incorrect DTIM behavior\"), everything else\nleaves at line rate through the AC queues. This partially reverts the\nusb.c hunk of that commit, whose unconditional routing is what lets\nthe backlog build up.\n\nOn a bench AP (USB2, 20 MHz, WPA2, hostapd, a Windows client driven\nthrough disconnect/reconnect cycles): reconnects fail 0/5 on RTL8822BU\nand 0/3 on RTL8821CU before this change, and pass 10/10 and 5/5 with\nit, with the page pool staying healthy and no beacon errors logged."
          }
        ],
        "id": "CVE-2026-99578",
        "lastModified": "2026-11-20T06:17:48.980",
        "metrics": {},
        "published": "2026-11-20T06:17:48.980",
        "references": [
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "url": "https://git.kernel.org/stable/c/781af5ab5a848b3c0767c0f057bd6692e3b7c17e"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "url": "https://git.kernel.org/stable/c/8da3a71216a0ecd02980dff5cf9739376249fc72"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "url": "https://git.kernel.org/stable/c/aa383c35d3e3688da8da0993f751c7b4bab66b02"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "url": "https://git.kernel.org/stable/c/c710c7c2e0380d7c0eeb33b686262edcaef7cb07"
          }
        ],
        "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "vulnStatus": "Received"
      }
    },
    "redhat_vex": {
      "aggregate_severity": "Moderate",
      "current_release_date": "2026-11-20T10:20:00+00:00",
      "cve": "CVE-2026-99578",
      "id": "CVE-2026-99578",
      "initial_release_date": "2026-11-20T05:49:10.728000+00:00",
      "product_status:known_affected": "113",
      "product_status:known_not_affected": "91",
      "source": "Red Hat CSAF VEX",
      "status": "final",
      "title": "kernel: kernel: Denial of Service in rtw88 driver via broadcast frame queue exhaustion",
      "url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-99578.json",
      "version": "3"
    }
  }
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline

Sightings and recorded dates, grouped by day · UTC

JSON
How durations are calculated

Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.

Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.

Events included in the timeline

Loading timeline…


    Loading…

    Loading…

    Loading…

    Related by attack behaviour

    Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.