cisco-sa-20180328-dos
Vulnerability from csaf_cisco
Published
2018-03-28 16:00
Modified
2022-12-15 22:19
Summary
Cisco IOS Software Integrated Services Module for VPN Denial of Service Vulnerability
Notes
Summary
A vulnerability in the crypto engine of the Cisco Integrated Services Module for VPN (ISM-VPN) running Cisco IOS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
The vulnerability is due to insufficient handling of VPN traffic by the affected device. An attacker could exploit this vulnerability by sending crafted VPN traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to hang or crash, resulting in a DoS condition.
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
This advisory is available at the following link: https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180328-dos ["https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180328-dos"]
This advisory is part of the March 28, 2018, release of the Cisco IOS and IOS XE Software Security Advisory Bundled Publication, which includes 20 Cisco Security Advisories that describe 22 vulnerabilities. For a complete list of the advisories and links to them, see Cisco Event Response: March 2018 Semiannual Cisco IOS and IOS XE Software Security Advisory Bundled Publication. ["https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-66682"]
Vulnerable Products
This vulnerability affects Cisco devices that have a Cisco ISM-VPN installed and are running a vulnerable release of Cisco IOS Software.
For information about which Cisco IOS Software releases are vulnerable, see the Fixed Software ["#fixed"] section of this advisory.
To determine whether a Cisco ISM-VPN is installed on a device, administrators can use the show crypto engine brief command in the CLI. The following example shows the output of the command for a Cisco 3900 Integrated Services Router that has a Cisco ISM-VPN installed:
ISR3900-ISM# show crypto engine brief
crypto engine name: Virtual Private Network (VPN) Module
crypto engine type: hardware
State: Enabled
Location: slot 0
Product Name: ISM VPN Accelerator <<<<<<<<<================
UBOOT Ver : U-Boot 1.1.1 - ISRG2-Crypto-Engine - Version 2.7 (Build time: Mar 7 2011 - 09:12:23)
Firmware Ver: User: shrtrive - View/Label: REVENTON_FW_COMMIT_IOS_051315 - Date: May 13 2015 - Time: 12:09:51
HW State : READY
Compression: No
DES: Yes
3 DES: Yes
AES CBC: Yes (128,192,256)
AES CNTR: No
Maximum buffer length: 4096
Maximum DH index: 5120
Maximum SA index: 5120
Maximum Flow index: 10230
Maximum RSA key size: 2048
crypto engine name: Cisco VPN Software Implementation
crypto engine type: software
serial number: 1810917E
crypto engine state: installed
crypto engine in slot: N/A
ISR3900-ISM#
Determining the Cisco IOS Software Release
To determine which Cisco IOS Software release is running on a device, administrators can log in to the device, use the show version command in the CLI, and then refer to the system banner that appears. If the device is running Cisco IOS Software, the system banner displays text similar to Cisco Internetwork Operating System Software or Cisco IOS Software. The banner also displays the installed image name in parentheses, followed by the Cisco IOS Software release number and release name. Some Cisco devices do not support the show version command or may provide different output.
The following example shows the output of the command for a device that is running Cisco IOS Software Release 15.5(2)T1 and has an installed image name of C2951-UNIVERSALK9-M:
Router> show version
Cisco IOS Software, C2951 Software (C2951-UNIVERSALK9-M), Version 15.5(2)T1, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2015 by Cisco Systems, Inc. Compiled Mon 22-Jun-15 09:32 by prod_rel_team . . .
For information about the naming and numbering conventions for Cisco IOS Software releases, see the Cisco IOS and NX-OS Software Reference Guide ["https://www.cisco.com/c/en/us/about/security-center/ios-nx-os-reference-guide.html"].
Products Confirmed Not Vulnerable
No other Cisco products are currently known to be affected by this vulnerability.
Cisco has confirmed that this vulnerability does not affect Cisco IOS XE Software, Cisco IOS XR Software, or Cisco NX-OS Software.
Workarounds
There are no workarounds that address this vulnerability.
Fixed Software
Cisco has released free software updates that address the vulnerability described in this advisory. Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license:
https://www.cisco.com/c/en/us/products/end-user-license-agreement.html ["https://www.cisco.com/c/en/us/products/end-user-license-agreement.html"]
Additionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.
When considering software upgrades, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories and Alerts page ["https://www.cisco.com/go/psirt"], to determine exposure and a complete upgrade solution.
In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.
Customers Without Service Contracts
Customers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC:
https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html ["https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html"]
Customers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.
Cisco IOS Software
To help customers determine their exposure to vulnerabilities in Cisco IOS Software, Cisco provides a tool, the Cisco IOS Software Checker ["https://sec.cloudapps.cisco.com/security/center/softwarechecker.x"], that identifies any Cisco Security Advisories that impact a specific Cisco IOS Software release and the earliest release that fixes the vulnerabilities described in each advisory (“First Fixed”). If applicable, the tool also returns the earliest release that fixes all the vulnerabilities described in all the advisories identified (“Combined First Fixed”).
Customers can use this tool to perform the following tasks:
Initiate a search by choosing one or more releases from a drop-down list or uploading a file from a local system for the tool to parse
Enter the output of the show version command for the tool to parse
Create a custom search by including all previously published Cisco Security Advisories, a specific advisory, or all advisories in the most recent bundled publication
To determine whether a release is affected by any published Cisco Security Advisory, use the Cisco IOS Software Checker ["https://sec.cloudapps.cisco.com/security/center/softwarechecker.x"] on Cisco.com or enter a Cisco IOS Software release-for example, 15.1(4)M2-in the following field:
Vulnerability Policy
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy ["https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
Exploitation and Public Announcements
In March 2022, the Cisco Product Security Incident Response Team (PSIRT) became aware of additional attempted exploitation of this vulnerability in the wild. Cisco continues to strongly recommend that customers upgrade to a fixed software release to remediate this vulnerability.
Source
This vulnerability was found during the resolution of a Cisco TAC support case.
Legal Disclaimer
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.
{ "document": { "acknowledgments": [ { "summary": "This vulnerability was found during the resolution of a Cisco TAC support case." } ], "category": "csaf_security_advisory", "csaf_version": "2.0", "notes": [ { "category": "summary", "text": "A vulnerability in the crypto engine of the Cisco Integrated Services Module for VPN (ISM-VPN) running Cisco IOS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.\r\n\r\nThe vulnerability is due to insufficient handling of VPN traffic by the affected device. An attacker could exploit this vulnerability by sending crafted VPN traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to hang or crash, resulting in a DoS condition.\r\n\r\nCisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.\r\n\r\nThis advisory is available at the following link: https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180328-dos [\"https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180328-dos\"]\r\n\r\nThis advisory is part of the March 28, 2018, release of the Cisco IOS and IOS XE Software Security Advisory Bundled Publication, which includes 20 Cisco Security Advisories that describe 22 vulnerabilities. For a complete list of the advisories and links to them, see Cisco Event Response: March 2018 Semiannual Cisco IOS and IOS XE Software Security Advisory Bundled Publication. [\"https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-66682\"]", "title": "Summary" }, { "category": "general", "text": "This vulnerability affects Cisco devices that have a Cisco ISM-VPN installed and are running a vulnerable release of Cisco IOS Software.\r\n\r\nFor information about which Cisco IOS Software releases are vulnerable, see the Fixed Software [\"#fixed\"] section of this advisory.\r\n\r\nTo determine whether a Cisco ISM-VPN is installed on a device, administrators can use the show crypto engine brief command in the CLI. The following example shows the output of the command for a Cisco 3900 Integrated Services Router that has a Cisco ISM-VPN installed:\r\n\r\n\r\nISR3900-ISM# show crypto engine brief\r\ncrypto engine name: Virtual Private Network (VPN) Module\r\ncrypto engine type: hardware\r\nState: Enabled\r\nLocation: slot 0\r\nProduct Name: ISM VPN Accelerator \u003c\u003c\u003c\u003c\u003c\u003c\u003c\u003c\u003c================\r\nUBOOT Ver : U-Boot 1.1.1 - ISRG2-Crypto-Engine - Version 2.7 (Build time: Mar 7 2011 - 09:12:23)\r\nFirmware Ver: User: shrtrive - View/Label: REVENTON_FW_COMMIT_IOS_051315 - Date: May 13 2015 - Time: 12:09:51\r\n\r\nHW State : READY\r\nCompression: No\r\nDES: Yes\r\n3 DES: Yes\r\nAES CBC: Yes (128,192,256)\r\nAES CNTR: No\r\nMaximum buffer length: 4096\r\nMaximum DH index: 5120\r\nMaximum SA index: 5120\r\nMaximum Flow index: 10230\r\nMaximum RSA key size: 2048\r\n\r\ncrypto engine name: Cisco VPN Software Implementation\r\ncrypto engine type: software\r\nserial number: 1810917E\r\ncrypto engine state: installed\r\ncrypto engine in slot: N/A\r\nISR3900-ISM#\r\n\r\nDetermining the Cisco IOS Software Release\r\nTo determine which Cisco IOS Software release is running on a device, administrators can log in to the device, use the show version command in the CLI, and then refer to the system banner that appears. If the device is running Cisco IOS Software, the system banner displays text similar to Cisco Internetwork Operating System Software or Cisco IOS Software. The banner also displays the installed image name in parentheses, followed by the Cisco IOS Software release number and release name. Some Cisco devices do not support the show version command or may provide different output.\r\n\r\nThe following example shows the output of the command for a device that is running Cisco IOS Software Release 15.5(2)T1 and has an installed image name of C2951-UNIVERSALK9-M:\r\n\r\n\r\nRouter\u003e show version\r\n Cisco IOS Software, C2951 Software (C2951-UNIVERSALK9-M), Version 15.5(2)T1, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2015 by Cisco Systems, Inc. Compiled Mon 22-Jun-15 09:32 by prod_rel_team . . .\r\n\r\nFor information about the naming and numbering conventions for Cisco IOS Software releases, see the Cisco IOS and NX-OS Software Reference Guide [\"https://www.cisco.com/c/en/us/about/security-center/ios-nx-os-reference-guide.html\"].", "title": "Vulnerable Products" }, { "category": "general", "text": "No other Cisco products are currently known to be affected by this vulnerability.\r\n\r\nCisco has confirmed that this vulnerability does not affect Cisco IOS XE Software, Cisco IOS XR Software, or Cisco NX-OS Software.", "title": "Products Confirmed Not Vulnerable" }, { "category": "general", "text": "There are no workarounds that address this vulnerability.", "title": "Workarounds" }, { "category": "general", "text": "Cisco has released free software updates that address the vulnerability described in this advisory. Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license:\r\nhttps://www.cisco.com/c/en/us/products/end-user-license-agreement.html [\"https://www.cisco.com/c/en/us/products/end-user-license-agreement.html\"]\r\n\r\nAdditionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.\r\n\r\nWhen considering software upgrades, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories and Alerts page [\"https://www.cisco.com/go/psirt\"], to determine exposure and a complete upgrade solution.\r\n\r\nIn all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.\r\n\r\nCustomers Without Service Contracts\r\n\r\nCustomers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC:\r\nhttps://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html [\"https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html\"]\r\n\r\nCustomers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.\r\n\r\n Cisco IOS Software\r\nTo help customers determine their exposure to vulnerabilities in Cisco IOS Software, Cisco provides a tool, the Cisco IOS Software Checker [\"https://sec.cloudapps.cisco.com/security/center/softwarechecker.x\"], that identifies any Cisco Security Advisories that impact a specific Cisco IOS Software release and the earliest release that fixes the vulnerabilities described in each advisory (\u201cFirst Fixed\u201d). If applicable, the tool also returns the earliest release that fixes all the vulnerabilities described in all the advisories identified (\u201cCombined First Fixed\u201d).\r\n\r\nCustomers can use this tool to perform the following tasks:\r\n\r\nInitiate a search by choosing one or more releases from a drop-down list or uploading a file from a local system for the tool to parse\r\nEnter the output of the show version command for the tool to parse\r\nCreate a custom search by including all previously published Cisco Security Advisories, a specific advisory, or all advisories in the most recent bundled publication\r\n\r\nTo determine whether a release is affected by any published Cisco Security Advisory, use the Cisco IOS Software Checker [\"https://sec.cloudapps.cisco.com/security/center/softwarechecker.x\"] on Cisco.com or enter a Cisco IOS Software release-for example, 15.1(4)M2-in the following field:", "title": "Fixed Software" }, { "category": "general", "text": "To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html\"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.", "title": "Vulnerability Policy" }, { "category": "general", "text": "In March 2022, the Cisco Product Security Incident Response Team (PSIRT) became aware of additional attempted exploitation of this vulnerability in the wild. Cisco continues to strongly recommend that customers upgrade to a fixed software release to remediate this vulnerability.", "title": "Exploitation and Public Announcements" }, { "category": "general", "text": "This vulnerability was found during the resolution of a Cisco TAC support case.", "title": "Source" }, { "category": "legal_disclaimer", "text": "THIS DOCUMENT IS PROVIDED ON AN \"AS IS\" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.\r\n\r\nA standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.", "title": "Legal Disclaimer" } ], "publisher": { "category": "vendor", "contact_details": "Emergency Support:\r\n+1 877 228 7302 (toll-free within North America)\r\n+1 408 525 6532 (International direct-dial)\r\nNon-emergency Support:\r\nEmail: psirt@cisco.com\r\nSupport requests that are received via e-mail are typically acknowledged within 48 hours.", "issuing_authority": "Cisco product security incident response is the responsibility of the Cisco Product Security Incident Response Team (PSIRT). The Cisco PSIRT is a dedicated, global team that manages the receipt, investigation, and public reporting of security vulnerability information that is related to Cisco products and networks. The on-call Cisco PSIRT works 24x7 with Cisco customers, independent security researchers, consultants, industry organizations, and other vendors to identify possible security issues with Cisco products and networks.\r\nMore information can be found in Cisco Security Vulnerability Policy available at https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html", "name": "Cisco", "namespace": "https://wwww.cisco.com" }, "references": [ { "category": "self", "summary": "Cisco IOS Software Integrated Services Module for VPN Denial of Service Vulnerability", "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180328-dos" }, { "category": "external", "summary": "Cisco Event Response: March 2018 Semiannual Cisco IOS and IOS XE Software Security Advisory Bundled Publication", "url": "https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-66682" }, { "category": "external", "summary": "Cisco Security Vulnerability Policy", "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html" }, { "category": "external", "summary": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180328-dos", "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180328-dos" }, { "category": "external", "summary": "Cisco Event Response: March 2018 Semiannual Cisco IOS and IOS XE Software Security Advisory Bundled Publication.", "url": "https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-66682" }, { "category": "external", "summary": "Cisco IOS and NX-OS Software Reference Guide", "url": "https://www.cisco.com/c/en/us/about/security-center/ios-nx-os-reference-guide.html" }, { "category": "external", "summary": "https://www.cisco.com/c/en/us/products/end-user-license-agreement.html", "url": "https://www.cisco.com/c/en/us/products/end-user-license-agreement.html" }, { "category": "external", "summary": "Cisco Security Advisories and Alerts page", "url": "https://www.cisco.com/go/psirt" }, { "category": "external", "summary": "https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html", "url": "https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html" }, { "category": "external", "summary": "Cisco IOS Software Checker", "url": "https://sec.cloudapps.cisco.com/security/center/softwarechecker.x" }, { "category": "external", "summary": "Cisco IOS Software Checker", "url": "https://sec.cloudapps.cisco.com/security/center/softwarechecker.x" }, { "category": "external", "summary": "Security Vulnerability Policy", "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html" } ], "title": "Cisco IOS Software Integrated Services Module for VPN Denial of Service Vulnerability", "tracking": { "current_release_date": "2022-12-15T22:19:54+00:00", "generator": { "date": "2022-12-15T22:20:31+00:00", "engine": { "name": "TVCE" } }, "id": "cisco-sa-20180328-dos", "initial_release_date": "2018-03-28T16:00:00+00:00", "revision_history": [ { "date": "2018-03-28T14:35:51+00:00", "number": "1.0.0", "summary": "Initial public release." }, { "date": "2022-12-15T22:19:54+00:00", "number": "1.1.0", "summary": "Updated exploitation information." } ], "status": "final", "version": "1.1.0" } }, "product_tree": { "branches": [ { "branches": [ { "branches": [ { "branches": [ { "category": "service_pack", "name": "15.2(4)M8", "product": { "name": "15.2(4)M8", "product_id": "CSAFPID-117800" } }, { "category": "service_pack", "name": "15.2(4)M10", "product": { "name": "15.2(4)M10", "product_id": "CSAFPID-117801" } }, { "category": "service_pack", "name": "15.2(4)M9", "product": { "name": "15.2(4)M9", "product_id": "CSAFPID-117804" } }, { "category": "service_pack", "name": "15.2(4)M11", "product": { "name": "15.2(4)M11", "product_id": "CSAFPID-210407" } } ], "category": "product_version", "name": "15.2M" }, { "branches": [ { "category": "service_pack", "name": "15.3(3)M6", "product": { "name": "15.3(3)M6", "product_id": "CSAFPID-198065" } }, { "category": "service_pack", "name": "15.3(3)M7", "product": { "name": "15.3(3)M7", "product_id": "CSAFPID-209091" } }, { "category": "service_pack", "name": "15.3(3)M8", "product": { "name": "15.3(3)M8", "product_id": "CSAFPID-209455" } }, { "category": "service_pack", "name": "15.3(3)M9", "product": { "name": "15.3(3)M9", "product_id": "CSAFPID-216344" } }, { "category": "service_pack", "name": "15.3(3)M10", "product": { "name": "15.3(3)M10", "product_id": "CSAFPID-220467" } }, { "category": "service_pack", "name": "15.3(3)M8a", "product": { "name": "15.3(3)M8a", "product_id": "CSAFPID-220650" } } ], "category": "product_version", "name": "15.3M" }, { "branches": [ { "category": "service_pack", "name": "15.4(3)M4", "product": { "name": "15.4(3)M4", "product_id": "CSAFPID-209094" } }, { "category": "service_pack", "name": "15.4(3)M5", "product": { "name": "15.4(3)M5", "product_id": "CSAFPID-211618" } }, { "category": "service_pack", "name": "15.4(3)M6", "product": { "name": "15.4(3)M6", "product_id": "CSAFPID-214166" } }, { "category": "service_pack", "name": "15.4(3)M7", "product": { "name": "15.4(3)M7", "product_id": "CSAFPID-220443" } }, { "category": "service_pack", "name": "15.4(3)M6a", "product": { "name": "15.4(3)M6a", "product_id": "CSAFPID-220674" } } ], "category": "product_version", "name": "15.4M" }, { "branches": [ { "category": "service_pack", "name": "15.5(2)T", "product": { "name": "15.5(2)T", "product_id": "CSAFPID-205517" } }, { "category": "service_pack", "name": "15.5(1)T2", "product": { "name": "15.5(1)T2", "product_id": "CSAFPID-209109" } }, { "category": "service_pack", "name": "15.5(1)T3", "product": { "name": "15.5(1)T3", "product_id": "CSAFPID-209110" } }, { "category": "service_pack", "name": "15.5(2)T1", "product": { "name": "15.5(2)T1", "product_id": "CSAFPID-209111" } }, { "category": "service_pack", "name": "15.5(2)T2", "product": { "name": "15.5(2)T2", "product_id": "CSAFPID-209112" } }, { "category": "service_pack", "name": "15.5(2)T3", "product": { "name": "15.5(2)T3", "product_id": "CSAFPID-211408" } }, { "category": "service_pack", "name": "15.5(2)T4", "product": { "name": "15.5(2)T4", "product_id": "CSAFPID-213795" } }, { "category": "service_pack", "name": "15.5(1)T4", "product": { "name": "15.5(1)T4", "product_id": "CSAFPID-214480" } } ], "category": "product_version", "name": "15.5T" }, { "branches": [ { "category": "service_pack", "name": "15.5(2)XB", "product": { "name": "15.5(2)XB", "product_id": "CSAFPID-213002" } } ], "category": "product_version", "name": "15.5XB" } ], "category": "product_family", "name": "IOS" } ], "category": "vendor", "name": "Cisco" } ] }, "vulnerabilities": [ { "cve": "CVE-2018-0154", "ids": [ { "system_name": "Cisco Bug ID", "text": "CSCvd39267" } ], "notes": [ { "category": "other", "text": "Complete.", "title": "Affected Product Comprehensiveness" } ], "product_status": { "known_affected": [ "CSAFPID-117800", "CSAFPID-117801", "CSAFPID-117804", "CSAFPID-198065", "CSAFPID-205517", "CSAFPID-209091", "CSAFPID-209094", "CSAFPID-209109", "CSAFPID-209110", "CSAFPID-209111", "CSAFPID-209112", "CSAFPID-209455", "CSAFPID-210407", "CSAFPID-211408", "CSAFPID-211618", "CSAFPID-213002", "CSAFPID-213795", "CSAFPID-214166", "CSAFPID-214480", "CSAFPID-216344", "CSAFPID-220443", "CSAFPID-220467", "CSAFPID-220650", "CSAFPID-220674" ] }, "release_date": "2018-03-28T16:00:00+00:00", "remediations": [ { "category": "vendor_fix", "details": "Cisco has released software updates that address this vulnerability.", "product_ids": [ "CSAFPID-117800", "CSAFPID-117801", "CSAFPID-117804", "CSAFPID-198065", "CSAFPID-205517", "CSAFPID-209091", "CSAFPID-209094", "CSAFPID-209109", "CSAFPID-209110", "CSAFPID-209111", "CSAFPID-209112", "CSAFPID-209455", "CSAFPID-210407", "CSAFPID-211408", "CSAFPID-211618", "CSAFPID-213002", "CSAFPID-213795", "CSAFPID-214166", "CSAFPID-214480", "CSAFPID-216344", "CSAFPID-220443", "CSAFPID-220467", "CSAFPID-220650", "CSAFPID-220674" ], "url": "https://software.cisco.com" } ], "scores": [ { "cvss_v3": { "baseScore": 8.6, "baseSeverity": "HIGH", "vectorString": "CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:H", "version": "3.0" }, "products": [ "CSAFPID-117800", "CSAFPID-117801", "CSAFPID-117804", "CSAFPID-198065", "CSAFPID-205517", "CSAFPID-209091", "CSAFPID-209094", "CSAFPID-209109", "CSAFPID-209110", "CSAFPID-209111", "CSAFPID-209112", "CSAFPID-209455", "CSAFPID-210407", "CSAFPID-211408", "CSAFPID-211618", "CSAFPID-213002", "CSAFPID-213795", "CSAFPID-214166", "CSAFPID-214480", "CSAFPID-216344", "CSAFPID-220443", "CSAFPID-220467", "CSAFPID-220650", "CSAFPID-220674" ] } ], "title": "Cisco IOS Software Integrated Services Module for VPN Denial of Service Vulnerability" } ] }
Loading...
Loading...
Sightings
Author | Source | Type | Date |
---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
- Confirmed: The vulnerability is confirmed from an analyst perspective.
- Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
- Patched: This vulnerability was successfully patched by the user reporting the sighting.
- Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
- Not confirmed: The user expresses doubt about the veracity of the vulnerability.
- Not patched: This vulnerability was not successfully patched by the user reporting the sighting.