cisco-sa-20200205-nxos-cdp-rce
Vulnerability from csaf_cisco
Published
2020-02-05 16:00
Modified
2020-02-14 20:08
Summary
Cisco NX-OS Software Cisco Discovery Protocol Remote Code Execution Vulnerability
Notes
Summary
A vulnerability in the Cisco Discovery Protocol implementation for Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code or cause a reload on an affected device.
The vulnerability exists because the Cisco Discovery Protocol parser does not properly validate input for certain fields in a Cisco Discovery Protocol message. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. An successful exploit could allow the attacker to cause a stack overflow, which could allow the attacker to execute arbitrary code with administrative privileges on an affected device.
Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
This advisory is available at the following link:
https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20200205-nxos-cdp-rce ["https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20200205-nxos-cdp-rce"]
Vulnerable Products
This vulnerability affects the following Cisco products if they have Cisco Discovery Protocol enabled both globally and on at least one interface and if they are running a vulnerable release of Cisco NX-OS Software:
Nexus 3000 Series Switches
Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode
Nexus 9000 Series Switches in standalone NX-OS mode
Note: Cisco Discovery Protocol is enabled on these products by default both globally and on all interfaces.
For information about which Cisco NX-OS Software releases are vulnerable, see the Fixed Software ["#fs"] section of this advisory.
Determine the Status of Cisco Discovery Protocol for Cisco Nexus Switches That Are Running Cisco NX-OS Software
Administrators can determine whether Cisco Discovery Protocol is enabled on a device by using the show running-config cdp all | include “cdp enable” command in the device CLI. If the command returns at least the following lines, Cisco Discovery Protocol is enabled globally and on at least one interface:
nxos# show running-config cdp all | include "cdp enable"
cdp enable cdp enable
Products Confirmed Not Vulnerable
Only products listed in the Vulnerable Products ["#vp"] section of this advisory are known to be affected by this vulnerability.
Cisco has confirmed that this vulnerability does not affect the following Cisco products:
Firepower 1000 Series
Firepower 2100 Series
Firepower 4100 Series
Firepower 9300 Security Appliances
MDS 9000 Series Multilayer Switches
Nexus 1000 Virtual Edge for VMware vSphere
Nexus 1000V Switch for Microsoft Hyper-V
Nexus 1000V Switch for VMware vSphere
Nexus 5500 Platform Switches1
Nexus 5600 Platform Switches1
Nexus 6000 Series Switches1
Nexus 7000 Series Switches
UCS 6200 Series Fabric Interconnects1
UCS 6300 Series Fabric Interconnects1
UCS 6400 Series Fabric Interconnects1
1. Earlier versions of this security advisory reported Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, and UCS 6200 Series, 6300 Series, and 6400 Series Fabric Interconnects as affected by this vulnerability. This information was incorrect.
Cisco has also confirmed that this vulnerability does not affect Cisco IOS Software, Cisco IOS XE Software, or Cisco IOS XR Software.
Workarounds
There are no workarounds that address this vulnerability.
However, customers who do not use Cisco Discovery Protocol can disable it either globally to fully close the attack vector or on individual interfaces to reduce the attack surface. Disable Cisco Discovery Protocol Globally on Cisco Nexus Switches That Are Running Cisco NX-OS Software
To disable Cisco Discovery Protocol globally on Cisco Nexus Switches that are running Cisco NX-OS Software, administrators can use the no cdp enable command in global configuration mode, as shown in the following example:
nxos# conf t
Enter configuration commands, one per line. End with CNTL/Z.
nxos(config)# no cdp enable
nxos(config)# end
nxos# copy running-config startup-config
[########################################] 100%
Copy complete.
Disable Cisco Discovery Protocol on an Interface on Cisco Nexus Switches That Are Running Cisco NX-OS Software
To disable Cisco Discovery Protocol on an interface on Cisco Nexus Switches that are running Cisco NX-OS Software, administrators can use the no cdp enable command in interface configuration mode, as shown in the following example:
nxos# conf t
Enter configuration commands, one per line. End with CNTL/Z.
nxos(config)# interface Ethernet1/1
nxos(config-if)# no cdp enable
nxos(config-if)# end
nxos# copy running-config startup-config
[########################################] 100%
Copy complete.
Fixed Software
Cisco has released free software updates that address the vulnerability described in this advisory. Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license:
https://www.cisco.com/c/en/us/products/end-user-license-agreement.html ["https://www.cisco.com/c/en/us/products/end-user-license-agreement.html"]
Additionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.
When considering software upgrades ["https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes"], customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories and Alerts page ["https://www.cisco.com/go/psirt"], to determine exposure and a complete upgrade solution.
In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.
Customers Without Service Contracts
Customers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC:
https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html ["https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html"]
Customers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.
Fixed Releases
In the following table(s), the left column lists Cisco software releases. The right column indicates whether a release is affected by the vulnerability described in this advisory and the first release that includes the fix for this vulnerability.
Nexus 3000 Series Switches and Nexus 9000 Series Switches in Standalone NX-OS Mode: CSCvr09175 ["https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr09175"] Cisco NX-OS Software Release
First Fixed Release for This Vulnerability
Earlier than 7.0(3)I7
Not vulnerable
7.0(3)I7 7.0(3)I7(8) (Feb 2020) or appropriate SMU1
7.0(3)F2
Not vulnerable
9.2 9.3(2) 9.3 9.3(2)
1. The SMUs that are available for Cisco NX-OS Software releases 7.0(3)I7(5a), 7.0(3)I7(6), and 7.0(3)I7(7) fix this vulnerability (CSCvr09175). They also fix the vulnerability (CSCvr14976) that is described in the advisory Cisco FXOS, IOS XR, and NX-OS Software Cisco Discovery Protocol Denial of Service Vulnerability ["https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20200205-fxnxos-iosxr-cdp-dos"]. The SMU filename follow this format: CSCvr09175-n9k_ALL-1.0.0-<nx-os_release>.lib32_n9000.rpm.
2. The Cisco NX-OS Software 7.0(3)F train runs only on Cisco Nexus 3600 Platform Switches and the Nexus 9500 R-Series Switching Platform and is no longer maintained. Customers are advised to migrate to Cisco NX-OS Software Release 9.2 or later.
SMU Installation Instructions
To download the SMUs from the Software Center ["https://software.cisco.com/download/home"] on Cisco.com, do the following:
Click Browse All.
Choose IOS and NX-OS Software > NX-OS > NX-OS Software > Switches > Data Center Switches.
Choose the appropriate product and model.
Choose NX-OS Software Maintenance Upgrades (SMU).
Choose a release from the left pane of the appropriate product page.
Note: The SMU filename follow this format: CSCvr09175-n9k_ALL-1.0.0-<NX-OS_Release>.lib32_n9000.rpm. For example, the SMU filename for Cisco NX-OS Software Release 7.0(3)I7(6) is CSCvr09175-n9k_ALL-1.0.0-7.0.3.I7.6.lib32_n9000.rpm.
To install the appropriate SMU, copy the SMU to the Bootflash: file system for the switch and execute the following commands, which activate the fix right away (this is a hot patch):
install add bootflash:<SMU_filename> activate
install commit
The following example shows the commands for installing the SMU for Cisco NX-OS Software Release 7.0(3)I7(6):
nx-os# install add bootflash:CSCvr09175-n9k_ALL-1.0.0-7.0.3.I7.6.lib32_n9000.rpm activate
nx-os# install commit
Note: These instructions apply to only this particular type of SMU.
Nexus 9000 Series Fabric Switches in ACI Mode: CSCvr09531 ["https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr09531"] Cisco NX-OS Software Release
First Fixed Release for This Vulnerability
Earlier than 13.1
Not vulnerable
13.1
Not vulnerable
13.2
Not vulnerable 14.0
14.2(1j) 14.1
14.2(1j) 14.2
14.2(1j)
Additional Resources
For help determining the best Cisco NX-OS Software release for a Cisco Nexus Switch, administrators can refer to the following Recommended Releases documents. If a security advisory recommends a later release, Cisco recommends following the advisory guidance.
Cisco MDS Series Switches ["https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/b_MDS_NX-OS_Recommended_Releases.html"]
Cisco Nexus 1000V for VMware Switch ["http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/recommended_releases/b_Cisco_N1KV_VMware_MinRecommendedReleases.html"]
Cisco Nexus 3000 Series Switches ["http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/recommended_release/b_Minimum_and_Recommended_Cisco_NX-OS_Releases_for_Cisco_Nexus_3000_Series_Switches.html"]
Cisco Nexus 5500 Platform Switches ["http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5500/sw/release/recommended_releases/n5500_recommended_nx-os_releases.html"]
Cisco Nexus 5600 Platform Switches ["https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5600/sw/release/recommended_releases/n5600_recommended_nx-os_releases.html"]
Cisco Nexus 6000 Series Switches ["http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus6000/sw/release/recommended_releases/recommended_nx-os_releases.html"]
Cisco Nexus 7000 Series Switches ["http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/recommended_releases/recommended_nx-os_releases.html"]
Cisco Nexus 9000 Series Switches ["http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/recommended_release/b_Minimum_and_Recommended_Cisco_NX-OS_Releases_for_Cisco_Nexus_9000_Series_Switches.html"]
Cisco Nexus 9000 Series ACI-Mode Switches ["https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/recommended-release/b_Recommended_Cisco_ACI_Releases.html"]
To determine the best release for Cisco UCS, see the Recommended Releases documents in the release notes for the device.
Vulnerability Policy
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy ["https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
Exploitation and Public Announcements
The Cisco Product Security Incident Response Team (PSIRT) is aware of public announcements about this vulnerability. Cisco PSIRT is not aware of any malicious use of the vulnerability that is described in this advisory.
Source
Cisco would like to thank Barak Hadad of Armis for reporting this vulnerability.
Legal Disclaimer
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.
{ "document": { "acknowledgments": [ { "summary": "Cisco would like to thank Barak Hadad of Armis for reporting this vulnerability." } ], "category": "csaf_security_advisory", "csaf_version": "2.0", "notes": [ { "category": "summary", "text": "A vulnerability in the Cisco Discovery Protocol implementation for Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code or cause a reload on an affected device.\r\n\r\nThe vulnerability exists because the Cisco Discovery Protocol parser does not properly validate input for certain fields in a Cisco Discovery Protocol message. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. An successful exploit could allow the attacker to cause a stack overflow, which could allow the attacker to execute arbitrary code with administrative privileges on an affected device.\r\n\r\nNote: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).\r\n\r\nCisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.\r\n\r\nThis advisory is available at the following link:\r\nhttps://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20200205-nxos-cdp-rce [\"https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20200205-nxos-cdp-rce\"]", "title": "Summary" }, { "category": "general", "text": "This vulnerability affects the following Cisco products if they have Cisco Discovery Protocol enabled both globally and on at least one interface and if they are running a vulnerable release of Cisco NX-OS Software:\r\n\r\nNexus 3000 Series Switches\r\nNexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode\r\nNexus 9000 Series Switches in standalone NX-OS mode\r\n\r\nNote: Cisco Discovery Protocol is enabled on these products by default both globally and on all interfaces.\r\n\r\nFor information about which Cisco NX-OS Software releases are vulnerable, see the Fixed Software [\"#fs\"] section of this advisory.\r\n Determine the Status of Cisco Discovery Protocol for Cisco Nexus Switches That Are Running Cisco NX-OS Software\r\nAdministrators can determine whether Cisco Discovery Protocol is enabled on a device by using the show running-config cdp all | include \u201ccdp enable\u201d command in the device CLI. If the command returns at least the following lines, Cisco Discovery Protocol is enabled globally and on at least one interface:\r\n\r\n\r\nnxos# show running-config cdp all | include \"cdp enable\"\r\ncdp enable cdp enable", "title": "Vulnerable Products" }, { "category": "general", "text": "Only products listed in the Vulnerable Products [\"#vp\"] section of this advisory are known to be affected by this vulnerability.\r\n\r\nCisco has confirmed that this vulnerability does not affect the following Cisco products:\r\n\r\nFirepower 1000 Series\r\nFirepower 2100 Series\r\nFirepower 4100 Series\r\nFirepower 9300 Security Appliances\r\nMDS 9000 Series Multilayer Switches\r\nNexus 1000 Virtual Edge for VMware vSphere\r\nNexus 1000V Switch for Microsoft Hyper-V\r\nNexus 1000V Switch for VMware vSphere\r\nNexus 5500 Platform Switches1\r\nNexus 5600 Platform Switches1\r\nNexus 6000 Series Switches1\r\nNexus 7000 Series Switches\r\nUCS 6200 Series Fabric Interconnects1\r\nUCS 6300 Series Fabric Interconnects1\r\nUCS 6400 Series Fabric Interconnects1\r\n\r\n1. Earlier versions of this security advisory reported Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, and UCS 6200 Series, 6300 Series, and 6400 Series Fabric Interconnects as affected by this vulnerability. This information was incorrect.\r\n\r\nCisco has also confirmed that this vulnerability does not affect Cisco IOS Software, Cisco IOS XE Software, or Cisco IOS XR Software.", "title": "Products Confirmed Not Vulnerable" }, { "category": "general", "text": "There are no workarounds that address this vulnerability.\r\n However, customers who do not use Cisco Discovery Protocol can disable it either globally to fully close the attack vector or on individual interfaces to reduce the attack surface. Disable Cisco Discovery Protocol Globally on Cisco Nexus Switches That Are Running Cisco NX-OS Software\r\nTo disable Cisco Discovery Protocol globally on Cisco Nexus Switches that are running Cisco NX-OS Software, administrators can use the no cdp enable command in global configuration mode, as shown in the following example:\r\n\r\n\r\nnxos# conf t\r\nEnter configuration commands, one per line. End with CNTL/Z.\r\nnxos(config)# no cdp enable\r\nnxos(config)# end\r\nnxos# copy running-config startup-config\r\n[########################################] 100%\r\nCopy complete.\r\n Disable Cisco Discovery Protocol on an Interface on Cisco Nexus Switches That Are Running Cisco NX-OS Software\r\nTo disable Cisco Discovery Protocol on an interface on Cisco Nexus Switches that are running Cisco NX-OS Software, administrators can use the no cdp enable command in interface configuration mode, as shown in the following example:\r\n\r\n\r\nnxos# conf t\r\nEnter configuration commands, one per line. End with CNTL/Z.\r\nnxos(config)# interface Ethernet1/1\r\nnxos(config-if)# no cdp enable\r\nnxos(config-if)# end\r\nnxos# copy running-config startup-config\r\n[########################################] 100%\r\nCopy complete.", "title": "Workarounds" }, { "category": "general", "text": "Cisco has released free software updates that address the vulnerability described in this advisory. Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license:\r\nhttps://www.cisco.com/c/en/us/products/end-user-license-agreement.html [\"https://www.cisco.com/c/en/us/products/end-user-license-agreement.html\"]\r\n\r\nAdditionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.\r\n\r\nWhen considering software upgrades [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes\"], customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories and Alerts page [\"https://www.cisco.com/go/psirt\"], to determine exposure and a complete upgrade solution.\r\n\r\nIn all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.\r\n Customers Without Service Contracts\r\nCustomers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC:\r\nhttps://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html [\"https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html\"]\r\n\r\nCustomers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.\r\n\r\n Fixed Releases\r\nIn the following table(s), the left column lists Cisco software releases. The right column indicates whether a release is affected by the vulnerability described in this advisory and the first release that includes the fix for this vulnerability.\r\n Nexus 3000 Series Switches and Nexus 9000 Series Switches in Standalone NX-OS Mode: CSCvr09175 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr09175\"] Cisco NX-OS Software Release\r\n First Fixed Release for This Vulnerability\r\n Earlier than 7.0(3)I7\r\n Not vulnerable\r\n 7.0(3)I7 7.0(3)I7(8) (Feb 2020) or appropriate SMU1\r\n 7.0(3)F2\r\n Not vulnerable\r\n 9.2 9.3(2) 9.3 9.3(2)\r\n\r\n1. The SMUs that are available for Cisco NX-OS Software releases 7.0(3)I7(5a), 7.0(3)I7(6), and 7.0(3)I7(7) fix this vulnerability (CSCvr09175). They also fix the vulnerability (CSCvr14976) that is described in the advisory Cisco FXOS, IOS XR, and NX-OS Software Cisco Discovery Protocol Denial of Service Vulnerability [\"https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20200205-fxnxos-iosxr-cdp-dos\"]. The SMU filename follow this format: CSCvr09175-n9k_ALL-1.0.0-\u003cnx-os_release\u003e.lib32_n9000.rpm.\r\n 2. The Cisco NX-OS Software 7.0(3)F train runs only on Cisco Nexus 3600 Platform Switches and the Nexus 9500 R-Series Switching Platform and is no longer maintained. Customers are advised to migrate to Cisco NX-OS Software Release 9.2 or later.\r\nSMU Installation Instructions\r\n\r\nTo download the SMUs from the Software Center [\"https://software.cisco.com/download/home\"] on Cisco.com, do the following:\r\n\r\nClick Browse All.\r\nChoose IOS and NX-OS Software \u003e NX-OS \u003e NX-OS Software \u003e Switches \u003e Data Center Switches.\r\nChoose the appropriate product and model.\r\nChoose NX-OS Software Maintenance Upgrades (SMU).\r\nChoose a release from the left pane of the appropriate product page.\r\n Note: The SMU filename follow this format: CSCvr09175-n9k_ALL-1.0.0-\u003cNX-OS_Release\u003e.lib32_n9000.rpm. For example, the SMU filename for Cisco NX-OS Software Release 7.0(3)I7(6) is CSCvr09175-n9k_ALL-1.0.0-7.0.3.I7.6.lib32_n9000.rpm.\r\n\r\nTo install the appropriate SMU, copy the SMU to the Bootflash: file system for the switch and execute the following commands, which activate the fix right away (this is a hot patch):\r\n\r\ninstall add bootflash:\u003cSMU_filename\u003e activate\r\ninstall commit\r\n\r\nThe following example shows the commands for installing the SMU for Cisco NX-OS Software Release 7.0(3)I7(6):\r\n\r\n\r\nnx-os# install add bootflash:CSCvr09175-n9k_ALL-1.0.0-7.0.3.I7.6.lib32_n9000.rpm activate\r\nnx-os# install commit\r\n\r\nNote: These instructions apply to only this particular type of SMU.\r\n Nexus 9000 Series Fabric Switches in ACI Mode: CSCvr09531 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr09531\"] Cisco NX-OS Software Release\r\n First Fixed Release for This Vulnerability\r\n Earlier than 13.1\r\n Not vulnerable\r\n 13.1\r\n Not vulnerable\r\n 13.2\r\n Not vulnerable 14.0\r\n 14.2(1j) 14.1\r\n 14.2(1j) 14.2\r\n 14.2(1j)\r\n\r\nAdditional Resources\r\nFor help determining the best Cisco NX-OS Software release for a Cisco Nexus Switch, administrators can refer to the following Recommended Releases documents. If a security advisory recommends a later release, Cisco recommends following the advisory guidance.\r\n\r\n\r\nCisco MDS Series Switches [\"https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/b_MDS_NX-OS_Recommended_Releases.html\"]\r\nCisco Nexus 1000V for VMware Switch [\"http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/recommended_releases/b_Cisco_N1KV_VMware_MinRecommendedReleases.html\"]\r\nCisco Nexus 3000 Series Switches [\"http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/recommended_release/b_Minimum_and_Recommended_Cisco_NX-OS_Releases_for_Cisco_Nexus_3000_Series_Switches.html\"]\r\nCisco Nexus 5500 Platform Switches [\"http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5500/sw/release/recommended_releases/n5500_recommended_nx-os_releases.html\"]\r\nCisco Nexus 5600 Platform Switches [\"https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5600/sw/release/recommended_releases/n5600_recommended_nx-os_releases.html\"]\r\nCisco Nexus 6000 Series Switches [\"http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus6000/sw/release/recommended_releases/recommended_nx-os_releases.html\"]\r\nCisco Nexus 7000 Series Switches [\"http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/recommended_releases/recommended_nx-os_releases.html\"]\r\nCisco Nexus 9000 Series Switches [\"http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/recommended_release/b_Minimum_and_Recommended_Cisco_NX-OS_Releases_for_Cisco_Nexus_9000_Series_Switches.html\"]\r\nCisco Nexus 9000 Series ACI-Mode Switches [\"https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/recommended-release/b_Recommended_Cisco_ACI_Releases.html\"]\r\n To determine the best release for Cisco UCS, see the Recommended Releases documents in the release notes for the device.", "title": "Fixed Software" }, { "category": "general", "text": "To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html\"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.", "title": "Vulnerability Policy" }, { "category": "general", "text": "The Cisco Product Security Incident Response Team (PSIRT) is aware of public announcements about this vulnerability. Cisco PSIRT is not aware of any malicious use of the vulnerability that is described in this advisory.", "title": "Exploitation and Public Announcements" }, { "category": "general", "text": "Cisco would like to thank Barak Hadad of Armis for reporting this vulnerability.", "title": "Source" }, { "category": "legal_disclaimer", "text": "THIS DOCUMENT IS PROVIDED ON AN \"AS IS\" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.\r\n\r\nA standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.", "title": "Legal Disclaimer" } ], "publisher": { "category": "vendor", "contact_details": "Emergency Support:\r\n+1 877 228 7302 (toll-free within North America)\r\n+1 408 525 6532 (International direct-dial)\r\nNon-emergency Support:\r\nEmail: psirt@cisco.com\r\nSupport requests that are received via e-mail are typically acknowledged within 48 hours.", "issuing_authority": "Cisco product security incident response is the responsibility of the Cisco Product Security Incident Response Team (PSIRT). The Cisco PSIRT is a dedicated, global team that manages the receipt, investigation, and public reporting of security vulnerability information that is related to Cisco products and networks. The on-call Cisco PSIRT works 24x7 with Cisco customers, independent security researchers, consultants, industry organizations, and other vendors to identify possible security issues with Cisco products and networks.\r\nMore information can be found in Cisco Security Vulnerability Policy available at https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html", "name": "Cisco", "namespace": "https://wwww.cisco.com" }, "references": [ { "category": "self", "summary": "Cisco NX-OS Software Cisco Discovery Protocol Remote Code Execution Vulnerability", "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20200205-nxos-cdp-rce" }, { "category": "external", "summary": "Cisco Security Vulnerability Policy", "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html" }, { "category": "external", "summary": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20200205-nxos-cdp-rce", "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20200205-nxos-cdp-rce" }, { "category": "external", "summary": "https://www.cisco.com/c/en/us/products/end-user-license-agreement.html", "url": "https://www.cisco.com/c/en/us/products/end-user-license-agreement.html" }, { "category": "external", "summary": "considering software upgrades", "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes" }, { "category": "external", "summary": "Cisco Security Advisories and Alerts page", "url": "https://www.cisco.com/go/psirt" }, { "category": "external", "summary": "https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html", "url": "https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html" }, { "category": "external", "summary": "CSCvr09175", "url": "https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr09175" }, { "category": "external", "summary": "Cisco FXOS, IOS XR, and NX-OS Software Cisco Discovery Protocol Denial of Service Vulnerability", "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20200205-fxnxos-iosxr-cdp-dos" }, { "category": "external", "summary": "Software Center", "url": "https://software.cisco.com/download/home" }, { "category": "external", "summary": "CSCvr09531", "url": "https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr09531" }, { "category": "external", "summary": "Cisco MDS Series Switches", "url": "https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/b_MDS_NX-OS_Recommended_Releases.html" }, { "category": "external", "summary": "Cisco Nexus 1000V for VMware Switch", "url": "http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/recommended_releases/b_Cisco_N1KV_VMware_MinRecommendedReleases.html" }, { "category": "external", "summary": "Cisco Nexus 3000 Series Switches", "url": "http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/recommended_release/b_Minimum_and_Recommended_Cisco_NX-OS_Releases_for_Cisco_Nexus_3000_Series_Switches.html" }, { "category": "external", "summary": "Cisco Nexus 5500 Platform Switches", "url": "http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5500/sw/release/recommended_releases/n5500_recommended_nx-os_releases.html" }, { "category": "external", "summary": "Cisco Nexus 5600 Platform Switches", "url": "https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5600/sw/release/recommended_releases/n5600_recommended_nx-os_releases.html" }, { "category": "external", "summary": "Cisco Nexus 6000 Series Switches", "url": "http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus6000/sw/release/recommended_releases/recommended_nx-os_releases.html" }, { "category": "external", "summary": "Cisco Nexus 7000 Series Switches", "url": "http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/recommended_releases/recommended_nx-os_releases.html" }, { "category": "external", "summary": "Cisco Nexus 9000 Series Switches", "url": "http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/recommended_release/b_Minimum_and_Recommended_Cisco_NX-OS_Releases_for_Cisco_Nexus_9000_Series_Switches.html" }, { "category": "external", "summary": "Cisco Nexus 9000 Series ACI-Mode Switches", "url": "https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/recommended-release/b_Recommended_Cisco_ACI_Releases.html" }, { "category": "external", "summary": "Security Vulnerability Policy", "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html" } ], "title": "Cisco NX-OS Software Cisco Discovery Protocol Remote Code Execution Vulnerability", "tracking": { "current_release_date": "2020-02-14T20:08:04+00:00", "generator": { "date": "2022-09-03T02:59:36+00:00", "engine": { "name": "TVCE" } }, "id": "cisco-sa-20200205-nxos-cdp-rce", "initial_release_date": "2020-02-05T16:00:00+00:00", "revision_history": [ { "date": "2020-02-05T15:18:35+00:00", "number": "1.0.0", "summary": "Initial public release." }, { "date": "2020-02-07T00:23:34+00:00", "number": "1.1.0", "summary": "Corrected information around when Cisco UCS Fabric Interconnects are vulnerable and mitigation options for Cisco UCS Fabric Interconnects." }, { "date": "2020-02-11T16:23:17+00:00", "number": "1.2.0", "summary": "Updated information on vulnerable releases for Nexus 3000 Series Switches and Nexus 9000 Series Switches." }, { "date": "2020-02-12T13:10:39+00:00", "number": "1.3.0", "summary": "Updated that Cisco UCS Fabric Interconnects are not affected by this vulnerability." }, { "date": "2020-02-14T20:08:04+00:00", "number": "1.4.0", "summary": "Updated that Cisco Nexus 5500 Platform Switches, Nexus 5600 Platform Switches and Nexus 6000 Series Switches are not affected by this vulnerability." } ], "status": "final", "version": "1.4.0" } }, "product_tree": { "branches": [ { "branches": [ { "branches": [ { "branches": [ { "category": "service_pack", "name": "7.0(3)I7(1)", "product": { "name": "7.0(3)I7(1)", "product_id": "CSAFPID-230542" } }, { "category": "service_pack", "name": "7.0(3)I7(2)", "product": { "name": "7.0(3)I7(2)", "product_id": "CSAFPID-239478" } }, { "category": "service_pack", "name": "7.0(3)I7(3)", "product": { "name": "7.0(3)I7(3)", "product_id": "CSAFPID-239479" } }, { "category": "service_pack", "name": "7.0(3)I7(4)", "product": { "name": "7.0(3)I7(4)", "product_id": "CSAFPID-248792" } }, { "category": "service_pack", "name": "7.0(3)I7(5)", "product": { "name": "7.0(3)I7(5)", "product_id": "CSAFPID-253295" } }, { "category": "service_pack", "name": "7.0(3)I7(5a)", "product": { "name": "7.0(3)I7(5a)", "product_id": "CSAFPID-256875" } }, { "category": "service_pack", "name": "7.0(3)I7(3z)", "product": { "name": "7.0(3)I7(3z)", "product_id": "CSAFPID-265113" } }, { "category": "service_pack", "name": "7.0(3)I7(6)", "product": { "name": "7.0(3)I7(6)", "product_id": "CSAFPID-265114" } }, { "category": "service_pack", "name": "7.0(3)I7(6z)", "product": { "name": "7.0(3)I7(6z)", "product_id": "CSAFPID-265115" } }, { "category": "service_pack", "name": "7.0(3)I7(7)", "product": { "name": "7.0(3)I7(7)", "product_id": "CSAFPID-267567" } } ], "category": "product_version", "name": "7.0(3)I7" }, { "branches": [ { "category": "service_pack", "name": "9.2(1)", "product": { "name": "9.2(1)", "product_id": "CSAFPID-248793" } }, { "category": "service_pack", "name": "9.2(2)", "product": { "name": "9.2(2)", "product_id": "CSAFPID-265141" } }, { "category": "service_pack", "name": "9.2(2t)", "product": { "name": "9.2(2t)", "product_id": "CSAFPID-265142" } }, { "category": "service_pack", "name": "9.2(3)", "product": { "name": "9.2(3)", "product_id": "CSAFPID-265143" } }, { "category": "service_pack", "name": "9.2(3y)", "product": { "name": "9.2(3y)", "product_id": "CSAFPID-265144" } }, { "category": "service_pack", "name": "9.2(4)", "product": { "name": "9.2(4)", "product_id": "CSAFPID-267105" } }, { "category": "service_pack", "name": "9.2(2v)", "product": { "name": "9.2(2v)", "product_id": "CSAFPID-268971" } } ], "category": "product_version", "name": "9.2" }, { "branches": [ { "category": "service_pack", "name": "7.0(3)IA7(1)", "product": { "name": "7.0(3)IA7(1)", "product_id": "CSAFPID-265117" } }, { "category": "service_pack", "name": "7.0(3)IA7(2)", "product": { "name": "7.0(3)IA7(2)", "product_id": "CSAFPID-265118" } } ], "category": "product_version", "name": "7.0(3)IA7" }, { "branches": [ { "category": "service_pack", "name": "7.0(3)IM7(2)", "product": { "name": "7.0(3)IM7(2)", "product_id": "CSAFPID-265128" } } ], "category": "product_version", "name": "7.0(3)IM7" }, { "branches": [ { "category": "service_pack", "name": "9.3(1)", "product": { "name": "9.3(1)", "product_id": "CSAFPID-265568" } }, { "category": "service_pack", "name": "9.3(1z)", "product": { "name": "9.3(1z)", "product_id": "CSAFPID-276381" } } ], "category": "product_version", "name": "9.3" } ], "category": "product_family", "name": "Cisco NX-OS Software" }, { "branches": [ { "branches": [ { "category": "service_pack", "name": "14.0(1h)", "product": { "name": "14.0(1h)", "product_id": "CSAFPID-257580" } }, { "category": "service_pack", "name": "14.0(2c)", "product": { "name": "14.0(2c)", "product_id": "CSAFPID-257581" } }, { "category": "service_pack", "name": "14.0(3d)", "product": { "name": "14.0(3d)", "product_id": "CSAFPID-259822" } }, { "category": "service_pack", "name": "14.0(3c)", "product": { "name": "14.0(3c)", "product_id": "CSAFPID-264644" } } ], "category": "product_version", "name": "14.0" }, { "branches": [ { "category": "service_pack", "name": "14.1(1i)", "product": { "name": "14.1(1i)", "product_id": "CSAFPID-264646" } }, { "category": "service_pack", "name": "14.1(1j)", "product": { "name": "14.1(1j)", "product_id": "CSAFPID-264647" } }, { "category": "service_pack", "name": "14.1(1k)", "product": { "name": "14.1(1k)", "product_id": "CSAFPID-264648" } }, { "category": "service_pack", "name": "14.1(1l)", "product": { "name": "14.1(1l)", "product_id": "CSAFPID-264649" } }, { "category": "service_pack", "name": "14.1(2g)", "product": { "name": "14.1(2g)", "product_id": "CSAFPID-265564" } }, { "category": "service_pack", "name": "14.1(2m)", "product": { "name": "14.1(2m)", "product_id": "CSAFPID-273939" } }, { "category": "service_pack", "name": "14.1(2o)", "product": { "name": "14.1(2o)", "product_id": "CSAFPID-273940" } }, { "category": "service_pack", "name": "14.1(2s)", "product": { "name": "14.1(2s)", "product_id": "CSAFPID-273941" } }, { "category": "service_pack", "name": "14.1(2u)", "product": { "name": "14.1(2u)", "product_id": "CSAFPID-273942" } }, { "category": "service_pack", "name": "14.1(2w)", "product": { "name": "14.1(2w)", "product_id": "CSAFPID-276890" } } ], "category": "product_version", "name": "14.1" }, { "branches": [ { "category": "service_pack", "name": "14.2(1i)", "product": { "name": "14.2(1i)", "product_id": "CSAFPID-273944" } } ], "category": "product_version", "name": "14.2" } ], "category": "product_family", "name": "Cisco NX-OS System Software in ACI Mode" }, { "category": "product_name", "name": "Cisco Nexus 3000 Series Switches", "product": { "name": "Cisco Nexus 3000 Series Switches", "product_id": "CSAFPID-265091" } }, { "category": "product_name", "name": "Cisco Nexus 9000 Series Switches", "product": { "name": "Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-265096" } } ], "category": "vendor", "name": "Cisco" } ], "relationships": [ { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 7.0(3)I7(1) when installed on Cisco Nexus 3000 Series Switches", "product_id": "CSAFPID-230542:265091" }, "product_reference": "CSAFPID-230542", "relates_to_product_reference": "CSAFPID-265091" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 7.0(3)I7(1) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-230542:265096" }, "product_reference": "CSAFPID-230542", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 7.0(3)I7(2) when installed on Cisco Nexus 3000 Series Switches", "product_id": "CSAFPID-239478:265091" }, "product_reference": "CSAFPID-239478", "relates_to_product_reference": "CSAFPID-265091" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 7.0(3)I7(2) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-239478:265096" }, "product_reference": "CSAFPID-239478", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 7.0(3)I7(3) when installed on Cisco Nexus 3000 Series Switches", "product_id": "CSAFPID-239479:265091" }, "product_reference": "CSAFPID-239479", "relates_to_product_reference": "CSAFPID-265091" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 7.0(3)I7(3) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-239479:265096" }, "product_reference": "CSAFPID-239479", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 7.0(3)I7(4) when installed on Cisco Nexus 3000 Series Switches", "product_id": "CSAFPID-248792:265091" }, "product_reference": "CSAFPID-248792", "relates_to_product_reference": "CSAFPID-265091" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 7.0(3)I7(4) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-248792:265096" }, "product_reference": "CSAFPID-248792", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 7.0(3)I7(5) when installed on Cisco Nexus 3000 Series Switches", "product_id": "CSAFPID-253295:265091" }, "product_reference": "CSAFPID-253295", "relates_to_product_reference": "CSAFPID-265091" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 7.0(3)I7(5) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-253295:265096" }, "product_reference": "CSAFPID-253295", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 7.0(3)I7(5a) when installed on Cisco Nexus 3000 Series Switches", "product_id": "CSAFPID-256875:265091" }, "product_reference": "CSAFPID-256875", "relates_to_product_reference": "CSAFPID-265091" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 7.0(3)I7(5a) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-256875:265096" }, "product_reference": "CSAFPID-256875", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 7.0(3)I7(3z) when installed on Cisco Nexus 3000 Series Switches", "product_id": "CSAFPID-265113:265091" }, "product_reference": "CSAFPID-265113", "relates_to_product_reference": "CSAFPID-265091" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 7.0(3)I7(3z) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-265113:265096" }, "product_reference": "CSAFPID-265113", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 7.0(3)I7(6) when installed on Cisco Nexus 3000 Series Switches", "product_id": "CSAFPID-265114:265091" }, "product_reference": "CSAFPID-265114", "relates_to_product_reference": "CSAFPID-265091" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 7.0(3)I7(6) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-265114:265096" }, "product_reference": "CSAFPID-265114", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 7.0(3)I7(6z) when installed on Cisco Nexus 3000 Series Switches", "product_id": "CSAFPID-265115:265091" }, "product_reference": "CSAFPID-265115", "relates_to_product_reference": "CSAFPID-265091" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 7.0(3)I7(7) when installed on Cisco Nexus 3000 Series Switches", "product_id": "CSAFPID-267567:265091" }, "product_reference": "CSAFPID-267567", "relates_to_product_reference": "CSAFPID-265091" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 7.0(3)I7(7) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-267567:265096" }, "product_reference": "CSAFPID-267567", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 9.2(1) when installed on Cisco Nexus 3000 Series Switches", "product_id": "CSAFPID-248793:265091" }, "product_reference": "CSAFPID-248793", "relates_to_product_reference": "CSAFPID-265091" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 9.2(1) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-248793:265096" }, "product_reference": "CSAFPID-248793", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 9.2(2) when installed on Cisco Nexus 3000 Series Switches", "product_id": "CSAFPID-265141:265091" }, "product_reference": "CSAFPID-265141", "relates_to_product_reference": "CSAFPID-265091" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 9.2(2) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-265141:265096" }, "product_reference": "CSAFPID-265141", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 9.2(2t) when installed on Cisco Nexus 3000 Series Switches", "product_id": "CSAFPID-265142:265091" }, "product_reference": "CSAFPID-265142", "relates_to_product_reference": "CSAFPID-265091" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 9.2(3) when installed on Cisco Nexus 3000 Series Switches", "product_id": "CSAFPID-265143:265091" }, "product_reference": "CSAFPID-265143", "relates_to_product_reference": "CSAFPID-265091" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 9.2(3) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-265143:265096" }, "product_reference": "CSAFPID-265143", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 9.2(3y) when installed on Cisco Nexus 3000 Series Switches", "product_id": "CSAFPID-265144:265091" }, "product_reference": "CSAFPID-265144", "relates_to_product_reference": "CSAFPID-265091" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 9.2(3y) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-265144:265096" }, "product_reference": "CSAFPID-265144", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 9.2(4) when installed on Cisco Nexus 3000 Series Switches", "product_id": "CSAFPID-267105:265091" }, "product_reference": "CSAFPID-267105", "relates_to_product_reference": "CSAFPID-265091" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 9.2(4) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-267105:265096" }, "product_reference": "CSAFPID-267105", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 9.2(2v) when installed on Cisco Nexus 3000 Series Switches", "product_id": "CSAFPID-268971:265091" }, "product_reference": "CSAFPID-268971", "relates_to_product_reference": "CSAFPID-265091" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 7.0(3)IA7(1) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-265117:265096" }, "product_reference": "CSAFPID-265117", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 7.0(3)IA7(2) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-265118:265096" }, "product_reference": "CSAFPID-265118", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 7.0(3)IM7(2) when installed on Cisco Nexus 3000 Series Switches", "product_id": "CSAFPID-265128:265091" }, "product_reference": "CSAFPID-265128", "relates_to_product_reference": "CSAFPID-265091" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 9.3(1) when installed on Cisco Nexus 3000 Series Switches", "product_id": "CSAFPID-265568:265091" }, "product_reference": "CSAFPID-265568", "relates_to_product_reference": "CSAFPID-265091" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 9.3(1) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-265568:265096" }, "product_reference": "CSAFPID-265568", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 9.3(1z) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-276381:265096" }, "product_reference": "CSAFPID-276381", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS System Software in ACI Mode 14.0(1h) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-257580:265096" }, "product_reference": "CSAFPID-257580", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS System Software in ACI Mode 14.0(2c) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-257581:265096" }, "product_reference": "CSAFPID-257581", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS System Software in ACI Mode 14.0(3d) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-259822:265096" }, "product_reference": "CSAFPID-259822", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS System Software in ACI Mode 14.0(3c) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-264644:265096" }, "product_reference": "CSAFPID-264644", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS System Software in ACI Mode 14.1(1i) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-264646:265096" }, "product_reference": "CSAFPID-264646", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS System Software in ACI Mode 14.1(1j) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-264647:265096" }, "product_reference": "CSAFPID-264647", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS System Software in ACI Mode 14.1(1k) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-264648:265096" }, "product_reference": "CSAFPID-264648", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS System Software in ACI Mode 14.1(1l) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-264649:265096" }, "product_reference": "CSAFPID-264649", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS System Software in ACI Mode 14.1(2g) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-265564:265096" }, "product_reference": "CSAFPID-265564", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS System Software in ACI Mode 14.1(2m) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-273939:265096" }, "product_reference": "CSAFPID-273939", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS System Software in ACI Mode 14.1(2o) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-273940:265096" }, "product_reference": "CSAFPID-273940", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS System Software in ACI Mode 14.1(2s) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-273941:265096" }, "product_reference": "CSAFPID-273941", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS System Software in ACI Mode 14.1(2u) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-273942:265096" }, "product_reference": "CSAFPID-273942", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS System Software in ACI Mode 14.1(2w) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-276890:265096" }, "product_reference": "CSAFPID-276890", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS System Software in ACI Mode 14.2(1i) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-273944:265096" }, "product_reference": "CSAFPID-273944", "relates_to_product_reference": "CSAFPID-265096" } ] }, "vulnerabilities": [ { "cve": "CVE-2020-3119", "ids": [ { "system_name": "Cisco Bug ID", "text": "CSCvr09175" }, { "system_name": "Cisco Bug ID", "text": "CSCvr09531" } ], "notes": [ { "category": "other", "text": "Complete.", "title": "Affected Product Comprehensiveness" } ], "product_status": { "known_affected": [ "CSAFPID-230542:265091", "CSAFPID-230542:265096", "CSAFPID-239478:265091", "CSAFPID-239478:265096", "CSAFPID-239479:265091", "CSAFPID-239479:265096", "CSAFPID-248792:265091", "CSAFPID-248792:265096", "CSAFPID-248793:265091", "CSAFPID-248793:265096", "CSAFPID-253295:265091", "CSAFPID-253295:265096", "CSAFPID-256875:265091", "CSAFPID-256875:265096", "CSAFPID-265113:265091", "CSAFPID-265113:265096", "CSAFPID-265114:265091", "CSAFPID-265114:265096", "CSAFPID-265115:265091", "CSAFPID-265117:265096", "CSAFPID-265118:265096", "CSAFPID-265128:265091", "CSAFPID-265141:265091", "CSAFPID-265141:265096", "CSAFPID-265142:265091", "CSAFPID-265143:265091", "CSAFPID-265143:265096", "CSAFPID-265144:265091", "CSAFPID-265144:265096", "CSAFPID-265568:265091", "CSAFPID-265568:265096", "CSAFPID-267105:265091", "CSAFPID-267105:265096", "CSAFPID-267567:265091", "CSAFPID-267567:265096", "CSAFPID-268971:265091", "CSAFPID-276381:265096", "CSAFPID-257580:265096", "CSAFPID-257581:265096", "CSAFPID-259822:265096", "CSAFPID-264644:265096", "CSAFPID-264646:265096", "CSAFPID-264647:265096", "CSAFPID-264648:265096", "CSAFPID-264649:265096", "CSAFPID-265564:265096", "CSAFPID-273939:265096", "CSAFPID-273940:265096", "CSAFPID-273941:265096", "CSAFPID-273942:265096", "CSAFPID-273944:265096", "CSAFPID-276890:265096" ] }, "release_date": "2020-02-05T16:00:00+00:00", "remediations": [ { "category": "vendor_fix", "details": "Cisco has released software updates that address this vulnerability.", "product_ids": [ "CSAFPID-230542:265091", "CSAFPID-230542:265096", "CSAFPID-239478:265091", "CSAFPID-239478:265096", "CSAFPID-239479:265091", "CSAFPID-239479:265096", "CSAFPID-248792:265091", "CSAFPID-248792:265096", "CSAFPID-248793:265091", "CSAFPID-248793:265096", "CSAFPID-253295:265091", "CSAFPID-253295:265096", "CSAFPID-256875:265091", "CSAFPID-256875:265096", "CSAFPID-265113:265091", "CSAFPID-265113:265096", "CSAFPID-265114:265091", "CSAFPID-265114:265096", "CSAFPID-265115:265091", "CSAFPID-265117:265096", "CSAFPID-265118:265096", "CSAFPID-265128:265091", "CSAFPID-265141:265091", "CSAFPID-265141:265096", "CSAFPID-265142:265091", "CSAFPID-265143:265091", "CSAFPID-265143:265096", "CSAFPID-265144:265091", "CSAFPID-265144:265096", "CSAFPID-265568:265091", "CSAFPID-265568:265096", "CSAFPID-267105:265091", "CSAFPID-267105:265096", "CSAFPID-267567:265091", "CSAFPID-267567:265096", "CSAFPID-268971:265091", "CSAFPID-276381:265096", "CSAFPID-257580:265096", "CSAFPID-257581:265096", "CSAFPID-259822:265096", "CSAFPID-264644:265096", "CSAFPID-264646:265096", "CSAFPID-264647:265096", "CSAFPID-264648:265096", "CSAFPID-264649:265096", "CSAFPID-265564:265096", "CSAFPID-273939:265096", "CSAFPID-273940:265096", "CSAFPID-273941:265096", "CSAFPID-273942:265096", "CSAFPID-273944:265096", "CSAFPID-276890:265096" ], "url": "https://software.cisco.com" } ], "scores": [ { "cvss_v3": { "baseScore": 8.8, "baseSeverity": "HIGH", "vectorString": "CVSS:3.0/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H", "version": "3.0" }, "products": [ "CSAFPID-230542:265091", "CSAFPID-230542:265096", "CSAFPID-239478:265091", "CSAFPID-239478:265096", "CSAFPID-239479:265091", "CSAFPID-239479:265096", "CSAFPID-248792:265091", "CSAFPID-248792:265096", "CSAFPID-248793:265091", "CSAFPID-248793:265096", "CSAFPID-253295:265091", "CSAFPID-253295:265096", "CSAFPID-256875:265091", "CSAFPID-256875:265096", "CSAFPID-265113:265091", "CSAFPID-265113:265096", "CSAFPID-265114:265091", "CSAFPID-265114:265096", "CSAFPID-265115:265091", "CSAFPID-265117:265096", "CSAFPID-265118:265096", "CSAFPID-265128:265091", "CSAFPID-265141:265091", "CSAFPID-265141:265096", "CSAFPID-265142:265091", "CSAFPID-265143:265091", "CSAFPID-265143:265096", "CSAFPID-265144:265091", "CSAFPID-265144:265096", "CSAFPID-265568:265091", "CSAFPID-265568:265096", "CSAFPID-267105:265091", "CSAFPID-267105:265096", "CSAFPID-267567:265091", "CSAFPID-267567:265096", "CSAFPID-268971:265091", "CSAFPID-276381:265096", "CSAFPID-257580:265096", "CSAFPID-257581:265096", "CSAFPID-259822:265096", "CSAFPID-264644:265096", "CSAFPID-264646:265096", "CSAFPID-264647:265096", "CSAFPID-264648:265096", "CSAFPID-264649:265096", "CSAFPID-265564:265096", "CSAFPID-273939:265096", "CSAFPID-273940:265096", "CSAFPID-273941:265096", "CSAFPID-273942:265096", "CSAFPID-273944:265096", "CSAFPID-276890:265096" ] } ], "title": "Cisco NX-OS Software Cisco Discovery Protocol Remote Code Execution Vulnerability" } ] }
Loading...
Loading...
- Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
- Confirmed: The vulnerability is confirmed from an analyst perspective.
- Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
- Patched: This vulnerability was successfully patched by the user reporting the sighting.
- Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
- Not confirmed: The user expresses doubt about the veracity of the vulnerability.
- Not patched: This vulnerability was not successfully patched by the user reporting the sighting.