cisco-sa-20200205-voip-phones-rce-dos
Vulnerability from csaf_cisco
Published
2020-02-05 16:00
Modified
2020-02-25 13:47
Summary
Cisco IP Phone Remote Code Execution and Denial of Service Vulnerability
Notes
Summary
A vulnerability in the Cisco Discovery Protocol implementation for the Cisco IP Phone could allow an unauthenticated, adjacent attacker to remotely execute code with root privileges or cause a reload of an affected IP phone.
The vulnerability is due to missing checks when processing Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a crafted Cisco Discovery Protocol packet to the targeted IP phone. A successful exploit could allow the attacker to remotely execute code with root privileges or cause a reload of an affected IP phone, resulting in a denial of service (DoS) condition.
Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
This advisory is available at the following link:
https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20200205-voip-phones-rce-dos ["https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20200205-voip-phones-rce-dos"]
Vulnerable Products
This vulnerability affects the following Cisco IP phones with Cisco Discovery Protocol enabled1 and running a vulnerable firmware release:
IP Conference Phone 7832
IP Conference Phone 7832 with Multiplatform Firmware
IP Conference Phone 8832
IP Conference Phone 8832 with Multiplatform Firmware
IP Phone 6821, 6841, 6851, 6861, 6871 with Multiplatform Firmware
IP Phone 7811, 7821, 7841, 7861 Desktop Phones
IP Phone 7811, 7821, 7841, 7861 Desktop Phones with Multiplatform Firmware
IP Phone 8811, 8841, 8851, 8861, 8845, 8865 Desktop Phones
IP Phone 8811, 8841, 8851, 8861, 8845, 8865 Desktop Phones with Multiplatform Firmware
Unified IP Conference Phone 8831
Unified IP Conference Phone 8831 for Third-Party Call Control
Wireless IP Phone 8821, 8821-EX
1Cisco Discovery Protocol is enabled by default on most IP Phone models.
For information about which software releases are vulnerable, see the Fixed Software ["#fs"] section of this advisory.
Products Confirmed Not Vulnerable
Only products listed in the Vulnerable Products ["#vp"] section of this advisory are known to be affected by this vulnerability.
Cisco has confirmed that this vulnerability does not affect the following Cisco products:
ATA 190 Analog Telephone Adapter
ATA 191 Analog Telephone Adapter
ATA 192 Multiplatform Analog Telephone Adapter
IP DECT 6825 with Multiplatform Firmware
SPA112 2-Port Phone Adapter
SPA122 ATA with Router
SPA2102 Phone Adapter with Router
SPA232D Multi-Line DECT ATA
Small Business SPA300 Series IP Phones
Small Business SPA500 Series IP Phones
SPA3102 Voice Gateway with Router
SPA8000 8-port IP Telephony Gateway
SPA8800 IP Telephony Gateway with 4 FXS and 4 FXO Ports
Unified IP Phone 6901
Unified IP Phone 7942
Unified IP Phone 7945
Unified IP Phone 7962
Unified IP Phone 7965
Unified IP Phone 7975
Unified SIP Phone 3905
Workarounds
There are no workarounds that address this vulnerability.
Fixed Software
Cisco has released free software updates that address the vulnerability described in this advisory. Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license: https://www.cisco.com/c/en/us/products/end-user-license-agreement.html ["https://www.cisco.com/c/en/us/products/end-user-license-agreement.html"]
Additionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.
When considering software upgrades ["https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes"], customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories and Alerts page ["https://www.cisco.com/go/psirt"], to determine exposure and a complete upgrade solution.
In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.
Customers Without Service Contracts
Customers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC:
https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html ["https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html"]
Customers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.
Fixed Releases
Customers are advised to upgrade to an appropriate fixed firmware release as indicated in the following table:
Cisco IP Phone Model
Cisco Bug ID
First Fixed Release IP Conference Phone 7832
CSCvr96069 ["https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96069"] 12.7(1)
IP Conference Phone 7832 with Multiplatform Firmware
CSCvr96060 ["https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96060"]
11.3(1)SR1 IP Conference Phone 8832 CSCvr96071 ["https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96071"] 12.7(1) IP Conference Phone 8832 with Multiplatform Firmware CSCvr96064 ["https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96064"] 11.3(1)SR1
IP Phone 6821, 6841, 6851, 6861, 6871 with Multiplatform Firmware CSCvr96065 ["https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96065"], CSCvr96067 ["https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96067"]
11.3(1)SR1
IP Phone 7811, 7821, 7841, 7861 Desktop Phones CSCvr96739 ["https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96739"] 12.7(1) IP Phone 7811, 7821, 7841, 7861 Desktop Phones with Multiplatform Firmware CSCvr96063 ["https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96063"]
11.3(1)SR1 IP Phone 8811, 8841, 8851, 8861, 8845, 8865 Desktop Phones CSCvr96066 ["https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96066"], CSCvr96069 ["https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96069"] 12.7(1) IP Phone 8811, 8841, 8851, 8861, 8845, 8865 Desktop Phones with Multiplatform Firmware CSCvr96058, ["https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96058"] CSCvr96059 ["https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96059"]
11.3(1)SR1 Unified IP Conference Phone 8831 CSCvr96738 ["https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96738"] 10.3(1)SR6 (Targeted for March 2020)
Unified IP Conference Phone 8831 for Third-Party Call Control CSCvr96057 ["https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96057"] There is no fixed firmware available at this time. Wireless IP Phone 8821 and 8821-EX CSCvr96070 ["https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96070"]
11.0(5)SR2
To download the Cisco IP Phone firmware from the Software Center ["https://software.cisco.com/download/navigator.html"] on Cisco.com ["https://www.cisco.com/"], do the following:
Click Browse all.
Choose Collaboration Endpoints > IP Phones.
Choose a specific product from the right pane of the product selector.
Choose a release from the left pane of the product page.
Vulnerability Policy
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy ["https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
Exploitation and Public Announcements
The Cisco Product Security Incident Response Team (PSIRT) is aware of public announcements about this vulnerability. Cisco PSIRT is not aware of any malicious use of the vulnerability that is described in this advisory.
Source
Cisco would like to thank Ben Seri, VP of Research at Armis, for finding and reporting this vulnerability.
Legal Disclaimer
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.
{ "document": { "acknowledgments": [ { "summary": "Cisco would like to thank Ben Seri, VP of Research at Armis, for finding and reporting this vulnerability." } ], "category": "csaf_security_advisory", "csaf_version": "2.0", "notes": [ { "category": "summary", "text": "A vulnerability in the Cisco Discovery Protocol implementation for the Cisco IP Phone could allow an unauthenticated, adjacent attacker to remotely execute code with root privileges or cause a reload of an affected IP phone.\r\n\r\nThe vulnerability is due to missing checks when processing Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a crafted Cisco Discovery Protocol packet to the targeted IP phone. A successful exploit could allow the attacker to remotely execute code with root privileges or cause a reload of an affected IP phone, resulting in a denial of service (DoS) condition.\r\n\r\nNote: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).\r\n\r\nCisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.\r\n\r\nThis advisory is available at the following link:\r\nhttps://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20200205-voip-phones-rce-dos [\"https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20200205-voip-phones-rce-dos\"]", "title": "Summary" }, { "category": "general", "text": "This vulnerability affects the following Cisco IP phones with Cisco Discovery Protocol enabled1 and running a vulnerable firmware release:\r\n\r\nIP Conference Phone 7832\r\nIP Conference Phone 7832 with Multiplatform Firmware\r\nIP Conference Phone 8832\r\nIP Conference Phone 8832 with Multiplatform Firmware\r\nIP Phone 6821, 6841, 6851, 6861, 6871 with Multiplatform Firmware\r\nIP Phone 7811, 7821, 7841, 7861 Desktop Phones\r\nIP Phone 7811, 7821, 7841, 7861 Desktop Phones with Multiplatform Firmware\r\nIP Phone 8811, 8841, 8851, 8861, 8845, 8865 Desktop Phones\r\nIP Phone 8811, 8841, 8851, 8861, 8845, 8865 Desktop Phones with Multiplatform Firmware\r\nUnified IP Conference Phone 8831\r\nUnified IP Conference Phone 8831 for Third-Party Call Control\r\nWireless IP Phone 8821, 8821-EX\r\n 1Cisco Discovery Protocol is enabled by default on most IP Phone models.\r\nFor information about which software releases are vulnerable, see the Fixed Software [\"#fs\"] section of this advisory.", "title": "Vulnerable Products" }, { "category": "general", "text": "Only products listed in the Vulnerable Products [\"#vp\"] section of this advisory are known to be affected by this vulnerability.\r\n\r\nCisco has confirmed that this vulnerability does not affect the following Cisco products:\r\n\r\nATA 190 Analog Telephone Adapter\r\nATA 191 Analog Telephone Adapter\r\nATA 192 Multiplatform Analog Telephone Adapter\r\nIP DECT 6825 with Multiplatform Firmware\r\nSPA112 2-Port Phone Adapter\r\nSPA122 ATA with Router\r\nSPA2102 Phone Adapter with Router\r\nSPA232D Multi-Line DECT ATA\r\nSmall Business SPA300 Series IP Phones\r\nSmall Business SPA500 Series IP Phones\r\nSPA3102 Voice Gateway with Router\r\nSPA8000 8-port IP Telephony Gateway\r\nSPA8800 IP Telephony Gateway with 4 FXS and 4 FXO Ports\r\nUnified IP Phone 6901\r\nUnified IP Phone 7942\r\nUnified IP Phone 7945\r\nUnified IP Phone 7962\r\nUnified IP Phone 7965\r\nUnified IP Phone 7975\r\nUnified SIP Phone 3905", "title": "Products Confirmed Not Vulnerable" }, { "category": "general", "text": "There are no workarounds that address this vulnerability.", "title": "Workarounds" }, { "category": "general", "text": "Cisco has released free software updates that address the vulnerability described in this advisory. Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license: https://www.cisco.com/c/en/us/products/end-user-license-agreement.html [\"https://www.cisco.com/c/en/us/products/end-user-license-agreement.html\"]\r\n\r\nAdditionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.\r\n\r\nWhen considering software upgrades [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes\"], customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories and Alerts page [\"https://www.cisco.com/go/psirt\"], to determine exposure and a complete upgrade solution.\r\n\r\nIn all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.\r\n Customers Without Service Contracts\r\nCustomers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC:\r\nhttps://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html [\"https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html\"]\r\n\r\nCustomers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.\r\n Fixed Releases\r\n Customers are advised to upgrade to an appropriate fixed firmware release as indicated in the following table:\r\n Cisco IP Phone Model\r\n Cisco Bug ID\r\n First Fixed Release IP Conference Phone 7832\r\n CSCvr96069 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96069\"] 12.7(1)\r\n IP Conference Phone 7832 with Multiplatform Firmware\r\n CSCvr96060 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96060\"]\r\n 11.3(1)SR1 IP Conference Phone 8832 CSCvr96071 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96071\"] 12.7(1) IP Conference Phone 8832 with Multiplatform Firmware CSCvr96064 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96064\"] 11.3(1)SR1\r\n IP Phone 6821, 6841, 6851, 6861, 6871 with Multiplatform Firmware CSCvr96065 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96065\"], CSCvr96067 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96067\"]\r\n 11.3(1)SR1\r\n IP Phone 7811, 7821, 7841, 7861 Desktop Phones CSCvr96739 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96739\"] 12.7(1) IP Phone 7811, 7821, 7841, 7861 Desktop Phones with Multiplatform Firmware CSCvr96063 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96063\"]\r\n 11.3(1)SR1 IP Phone 8811, 8841, 8851, 8861, 8845, 8865 Desktop Phones CSCvr96066 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96066\"], CSCvr96069 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96069\"] 12.7(1) IP Phone 8811, 8841, 8851, 8861, 8845, 8865 Desktop Phones with Multiplatform Firmware CSCvr96058, [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96058\"] CSCvr96059 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96059\"]\r\n 11.3(1)SR1 Unified IP Conference Phone 8831 CSCvr96738 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96738\"] 10.3(1)SR6 (Targeted for March 2020)\r\n Unified IP Conference Phone 8831 for Third-Party Call Control CSCvr96057 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96057\"] There is no fixed firmware available at this time. Wireless IP Phone 8821 and 8821-EX CSCvr96070 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96070\"]\r\n 11.0(5)SR2\r\nTo download the Cisco IP Phone firmware from the Software Center [\"https://software.cisco.com/download/navigator.html\"] on Cisco.com [\"https://www.cisco.com/\"], do the following:\r\n\r\nClick Browse all.\r\nChoose Collaboration Endpoints \u003e IP Phones.\r\nChoose a specific product from the right pane of the product selector.\r\nChoose a release from the left pane of the product page.", "title": "Fixed Software" }, { "category": "general", "text": "To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html\"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.", "title": "Vulnerability Policy" }, { "category": "general", "text": "The Cisco Product Security Incident Response Team (PSIRT) is aware of public announcements about this vulnerability. Cisco PSIRT is not aware of any malicious use of the vulnerability that is described in this advisory.", "title": "Exploitation and Public Announcements" }, { "category": "general", "text": "Cisco would like to thank Ben Seri, VP of Research at Armis, for finding and reporting this vulnerability.", "title": "Source" }, { "category": "legal_disclaimer", "text": "THIS DOCUMENT IS PROVIDED ON AN \"AS IS\" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.\r\n\r\nA standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.", "title": "Legal Disclaimer" } ], "publisher": { "category": "vendor", "contact_details": "Emergency Support:\r\n+1 877 228 7302 (toll-free within North America)\r\n+1 408 525 6532 (International direct-dial)\r\nNon-emergency Support:\r\nEmail: psirt@cisco.com\r\nSupport requests that are received via e-mail are typically acknowledged within 48 hours.", "issuing_authority": "Cisco product security incident response is the responsibility of the Cisco Product Security Incident Response Team (PSIRT). The Cisco PSIRT is a dedicated, global team that manages the receipt, investigation, and public reporting of security vulnerability information that is related to Cisco products and networks. The on-call Cisco PSIRT works 24x7 with Cisco customers, independent security researchers, consultants, industry organizations, and other vendors to identify possible security issues with Cisco products and networks.\r\nMore information can be found in Cisco Security Vulnerability Policy available at https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html", "name": "Cisco", "namespace": "https://wwww.cisco.com" }, "references": [ { "category": "self", "summary": "Cisco IP Phone Remote Code Execution and Denial of Service Vulnerability", "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20200205-voip-phones-rce-dos" }, { "category": "external", "summary": "Cisco Security Vulnerability Policy", "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html" }, { "category": "external", "summary": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20200205-voip-phones-rce-dos", "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20200205-voip-phones-rce-dos" }, { "category": "external", "summary": "https://www.cisco.com/c/en/us/products/end-user-license-agreement.html", "url": "https://www.cisco.com/c/en/us/products/end-user-license-agreement.html" }, { "category": "external", "summary": "considering software upgrades", "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes" }, { "category": "external", "summary": "Cisco Security Advisories and Alerts page", "url": "https://www.cisco.com/go/psirt" }, { "category": "external", "summary": "https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html", "url": "https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html" }, { "category": "external", "summary": "CSCvr96069", "url": "https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96069" }, { "category": "external", "summary": "CSCvr96060", "url": "https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96060" }, { "category": "external", "summary": "CSCvr96071", "url": "https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96071" }, { "category": "external", "summary": "CSCvr96064", "url": "https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96064" }, { "category": "external", "summary": "CSCvr96065", "url": "https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96065" }, { "category": "external", "summary": "CSCvr96067", "url": "https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96067" }, { "category": "external", "summary": "CSCvr96739", "url": "https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96739" }, { "category": "external", "summary": "CSCvr96063", "url": "https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96063" }, { "category": "external", "summary": "CSCvr96066", "url": "https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96066" }, { "category": "external", "summary": "CSCvr96069", "url": "https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96069" }, { "category": "external", "summary": "CSCvr96058,", "url": "https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96058" }, { "category": "external", "summary": "CSCvr96059", "url": "https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96059" }, { "category": "external", "summary": "CSCvr96738", "url": "https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96738" }, { "category": "external", "summary": "CSCvr96057", "url": "https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96057" }, { "category": "external", "summary": "CSCvr96070", "url": "https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr96070" }, { "category": "external", "summary": "Software Center", "url": "https://software.cisco.com/download/navigator.html" }, { "category": "external", "summary": "Cisco.com", "url": "https://www.cisco.com/" }, { "category": "external", "summary": "Security Vulnerability Policy", "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html" } ], "title": "Cisco IP Phone Remote Code Execution and Denial of Service Vulnerability", "tracking": { "current_release_date": "2020-02-25T13:47:32+00:00", "generator": { "date": "2022-09-03T03:02:16+00:00", "engine": { "name": "TVCE" } }, "id": "cisco-sa-20200205-voip-phones-rce-dos", "initial_release_date": "2020-02-05T16:00:00+00:00", "revision_history": [ { "date": "2020-02-05T15:18:33+00:00", "number": "1.0.0", "summary": "Initial public release." }, { "date": "2020-02-11T23:57:07+00:00", "number": "1.1.0", "summary": "Added the Cisco Unified IP Phone 7900 Series as not vulnerable." }, { "date": "2020-02-14T15:21:51+00:00", "number": "1.2.0", "summary": "Added the Cisco ATA191 and ATA 192 products as not vulnerable.\r\nListed the specific models of the 7900 phones that are confirmed not vulnerable." }, { "date": "2020-02-20T22:04:40+00:00", "number": "1.3.0", "summary": "Added the Cisco Unified SIP Phone 3905 and Cisco Unified IP Phone 6901 as confirmed not vulnerable." }, { "date": "2020-02-25T13:47:32+00:00", "number": "1.4.0", "summary": "Added the Cisco ATA 190 Analog Telephone Adapter product as not vulnerable." } ], "status": "final", "version": "1.4.0" } }, "product_tree": { "branches": [ { "branches": [ { "category": "product_family", "name": "Cisco IP phone", "product": { "name": "Cisco IP phone ", "product_id": "CSAFPID-4473" } }, { "category": "product_family", "name": "Cisco IP Phone 8800 Series Software", "product": { "name": "Cisco IP Phone 8800 Series Software ", "product_id": "CSAFPID-205455" } }, { "category": "product_family", "name": "Cisco IP Phone 7800 Series", "product": { "name": "Cisco IP Phone 7800 Series ", "product_id": "CSAFPID-211541" } }, { "category": "product_family", "name": "Cisco Small Business IP Phones", "product": { "name": "Cisco Small Business IP Phones ", "product_id": "CSAFPID-211649" } }, { "category": "product_family", "name": "Cisco IP Phone 7800 Series with Multiplatform Firmware", "product": { "name": "Cisco IP Phone 7800 Series with Multiplatform Firmware ", "product_id": "CSAFPID-235374" } }, { "category": "product_family", "name": "Cisco IP Phone 6800 Series with Multiplatform Firmware", "product": { "name": "Cisco IP Phone 6800 Series with Multiplatform Firmware ", "product_id": "CSAFPID-238623" } }, { "category": "product_family", "name": "Cisco IP Phone 8800 Series with Multiplatform Firmware", "product": { "name": "Cisco IP Phone 8800 Series with Multiplatform Firmware ", "product_id": "CSAFPID-238624" } } ], "category": "vendor", "name": "Cisco" } ] }, "vulnerabilities": [ { "cve": "CVE-2020-3111", "ids": [ { "system_name": "Cisco Bug ID", "text": "CSCvr96067" }, { "system_name": "Cisco Bug ID", "text": "CSCvr96060" }, { "system_name": "Cisco Bug ID", "text": "CSCvr96739" }, { "system_name": "Cisco Bug ID", "text": "CSCvr96063" }, { "system_name": "Cisco Bug ID", "text": "CSCvr96738" }, { "system_name": "Cisco Bug ID", "text": "CSCvr96066" }, { "system_name": "Cisco Bug ID", "text": "CSCvr96071" }, { "system_name": "Cisco Bug ID", "text": "CSCvr96070" }, { "system_name": "Cisco Bug ID", "text": "CSCvr96069" }, { "system_name": "Cisco Bug ID", "text": "CSCvr96058" }, { "system_name": "Cisco Bug ID", "text": "CSCvr96059" }, { "system_name": "Cisco Bug ID", "text": "CSCvr96064" }, { "system_name": "Cisco Bug ID", "text": "CSCvr96057" }, { "system_name": "Cisco Bug ID", "text": "CSCvr96065" } ], "notes": [ { "category": "other", "text": "Complete.", "title": "Affected Product Comprehensiveness" } ], "product_status": { "known_affected": [ "CSAFPID-238623", "CSAFPID-211541", "CSAFPID-235374", "CSAFPID-205455", "CSAFPID-238624", "CSAFPID-211649", "CSAFPID-4473" ] }, "release_date": "2020-02-05T16:00:00+00:00", "remediations": [ { "category": "vendor_fix", "details": "Cisco has released software updates that address this vulnerability.", "product_ids": [ "CSAFPID-238624", "CSAFPID-205455", "CSAFPID-235374", "CSAFPID-4473", "CSAFPID-211541", "CSAFPID-211649", "CSAFPID-238623" ], "url": "https://software.cisco.com" } ], "scores": [ { "cvss_v3": { "baseScore": 8.8, "baseSeverity": "HIGH", "vectorString": "CVSS:3.0/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H", "version": "3.0" }, "products": [ "CSAFPID-238623", "CSAFPID-211541", "CSAFPID-235374", "CSAFPID-205455", "CSAFPID-238624", "CSAFPID-211649", "CSAFPID-4473" ] } ], "title": "Cisco IP Phone Remote Code Execution and Denial of Service Vulnerability" } ] }
Loading…
Loading…
Sightings
Author | Source | Type | Date |
---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
- Confirmed: The vulnerability is confirmed from an analyst perspective.
- Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
- Patched: This vulnerability was successfully patched by the user reporting the sighting.
- Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
- Not confirmed: The user expresses doubt about the veracity of the vulnerability.
- Not patched: This vulnerability was not successfully patched by the user reporting the sighting.