{
  "document": {
    "acknowledgments": [
      {
        "organization": "Siemens ProductCERT",
        "summary": "reporting these vulnerabilities to CISA."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited",
      "tlp": {
        "label": "WHITE",
        "url": "https://us-cert.cisa.gov/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "general",
        "text": "This CSAF advisory was extracted from unstructured data and may contain inaccuracies. If you notice any errors, please reach out to the designated contact at CISA CSAF: central@cisa.dhs.gov",
        "title": "CISA Disclaimer"
      },
      {
        "category": "summary",
        "text": "Multiple vulnerabilities have been identified in the Linux Kernel of the SIMATIC S7-1500 TM MFP V1.0.\n\nSiemens is preparing updates and recommends specific countermeasures for products where updates are not, or not yet available.",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "Siemens Security Advisories are subject to the terms and conditions contained in Siemens\u0027 underlying license terms or other applicable agreements previously agreed to with Siemens (hereinafter \"License Terms\"). To the extent applicable to information, software or documentation made available in or through a Siemens Security Advisory, the Terms of Use of Siemens\u0027 Global Website (https://www.siemens.com/terms_of_use, hereinafter \"Terms of Use\"), in particular Sections 8-10 of the Terms of Use, shall apply additionally. In case of conflicts, the License Terms shall prevail over the Terms of Use.",
        "title": "Terms of Use"
      },
      {
        "category": "legal_disclaimer",
        "text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
        "title": "Legal Notice"
      },
      {
        "category": "other",
        "text": "This CISA CSAF advisory was converted from Siemens ProductCERT\u0027s CSAF advisory.",
        "title": "Advisory Conversion Disclaimer"
      },
      {
        "category": "other",
        "text": "Multiple",
        "title": "Critical infrastructure sectors"
      },
      {
        "category": "other",
        "text": "Worldwide",
        "title": "Countries/areas deployed"
      },
      {
        "category": "other",
        "text": "Germany",
        "title": "Company headquarters location"
      },
      {
        "category": "general",
        "text": "CISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Minimizing network exposure for all control system devices and/or systems, ensuring they are not accessible from the internet.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Locating control system networks and remote devices behind firewalls and isolating them from business networks.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "When remote access is required, using more secure methods, such as Virtual Private Networks (VPNs). Recognize VPNs may have vulnerabilities, should be updated to the most recent version available, and are only as secure as the connected devices.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.",
        "title": "Recommended Practices"
      },
      {
        "category": "other",
        "text": "No known public exploits specifically target these vulnerabilities.",
        "title": "Exploitability"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "Email: CISAservicedesk@cisa.dhs.gov;\n Toll Free: 1-888-282-0870",
      "name": "CISA",
      "namespace": "https://www.cisa.gov/"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-794697: Vulnerabilities in the Linux Kernel of the SIMATIC S7-1500 TM MFP V1.0 - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-794697.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-23-166-11 JSON",
        "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2023/icsa-23-166-11.json"
      },
      {
        "category": "self",
        "summary": "SSA-794697: Vulnerabilities in the Linux Kernel of the SIMATIC S7-1500 TM MFP V1.0 - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-794697.html"
      },
      {
        "category": "self",
        "summary": "SSA-794697: Vulnerabilities in the Linux Kernel of the SIMATIC S7-1500 TM MFP V1.0 - PDF Version",
        "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-794697.pdf"
      },
      {
        "category": "self",
        "summary": "SSA-794697: Vulnerabilities in the Linux Kernel of the SIMATIC S7-1500 TM MFP V1.0 - TXT Version",
        "url": "https://cert-portal.siemens.com/productcert/txt/ssa-794697.txt"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-23-166-11 - Web Version",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-23-166-11"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/alerts/ICS-ALERT-10-301-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/resources-tools/resources/ics-recommended-practices"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/topics/industrial-control-systems"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/sites/default/files/publications/Cybersecurity_Best_Practices_for_Industrial_Control_Systems.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/tips/ICS-TIP-12-146-01B"
      }
    ],
    "title": "Siemens SIMATIC S7-1500 TM MFP Linux Kernel",
    "tracking": {
      "current_release_date": "2023-06-13T00:00:00.000000Z",
      "generator": {
        "engine": {
          "name": "CISA CSAF Generator",
          "version": "1"
        }
      },
      "id": "ICSA-23-166-11",
      "initial_release_date": "2023-06-13T00:00:00.000000Z",
      "revision_history": [
        {
          "date": "2023-06-13T00:00:00.000000Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        }
      ],
      "status": "interim",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/*",
                "product": {
                  "name": "SIMATIC S7-1500 TM MFP - Linux Kernel",
                  "product_id": "1"
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 TM MFP - Linux Kernel"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2021-3759",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A memory overflow vulnerability was found in the Linux kernel\u2019s ipc functionality of the memcg subsystem, in the way a user calls the semget function multiple times, creating semaphores. This flaw allows a local user to starve the resources, causing a denial of service. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2021-3759"
    },
    {
      "cve": "CVE-2021-4037",
      "cwe": {
        "id": "CWE-284",
        "name": "Improper Access Control"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in the fs/inode.c:inode_init_owner() function logic of the LInux kernel that allows local users to create files for the XFS file-system with an unintended group ownership and with group execution and SGID permission bits set, in a scenario where a directory is SGID and belongs to a certain group and is writable by a user who is not a member of this group. This can lead to excessive permissions granted in case when they should not. This vulnerability is similar to the previous CVE-2018-13405 and adds the missed fix for the XFS.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2021-4037"
    },
    {
      "cve": "CVE-2021-33655",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When sending malicous data to kernel by ioctl cmd FBIOPUT_VSCREENINFO,kernel will write memory out of bounds.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2021-33655"
    },
    {
      "cve": "CVE-2022-0171",
      "cwe": {
        "id": "CWE-459",
        "name": "Incomplete Cleanup"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel. The existing KVM SEV API has a vulnerability that allows a non-root (host) user-level application to crash the host kernel by creating a confidential guest VM instance in AMD CPU that supports Secure Encrypted Virtualization (SEV).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-0171"
    },
    {
      "cve": "CVE-2022-1012",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A memory leak problem was found in the TCP source port generation algorithm in net/ipv4/tcp.c due to the small table perturb size. This flaw may allow an attacker to information leak and may cause a denial of service problem.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1012"
    },
    {
      "cve": "CVE-2022-1184",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in fs/ext4/namei.c:dx_insert_block() in the Linux kernel\u2019s filesystem sub-component. This flaw allows a local attacker with a user privilege to cause a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1184"
    },
    {
      "cve": "CVE-2022-1292",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The c_rehash script does not properly sanitise shell metacharacters to prevent command injection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1292"
    },
    {
      "cve": "CVE-2022-1343",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Under certain circumstances, the command line OCSP verify function reports successful verification when the verification in fact failed. In this case the incorrect successful response will also be accompanied by error messages showing the failure and contradicting the apparently successful result.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1343"
    },
    {
      "cve": "CVE-2022-1434",
      "cwe": {
        "id": "CWE-327",
        "name": "Use of a Broken or Risky Cryptographic Algorithm"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When using the RC4-MD5 ciphersuite, which is disabled by default, an attacker is able to modify data in transit due to an incorrect use of the AAD data as the MAC key in OpenSSL 3.0. An attacker is not able to decrypt any communication.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1434"
    },
    {
      "cve": "CVE-2022-1462",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds read flaw was found in the Linux kernel\u2019s TeleTYpe subsystem. The issue occurs in how a user triggers a race condition using ioctls TIOCSPTLCK and TIOCGPTPEER and TIOCSTI and TCXONC with leakage of memory in the flush_to_ldisc function. This flaw allows a local user to crash the system or read unauthorized random data from memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1462"
    },
    {
      "cve": "CVE-2022-1473",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The used OpenSSL version improperly reuses memory when decoding certificates or keys. This can lead to a process termination and Denial of Service for long lived processes.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1473"
    },
    {
      "cve": "CVE-2022-1679",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in the Linux kernel\u2019s Atheros wireless adapter driver in the way a user forces the ath9k_htc_wait_for_target function to fail with some input messages. This flaw allows a local user to crash or potentially escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1679"
    },
    {
      "cve": "CVE-2022-1852",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference flaw was found in the Linux kernel\u2019s KVM module, which can lead to a denial of service in the x86_emulate_insn in arch/x86/kvm/emulate.c. This flaw occurs while executing an illegal instruction in guest in the Intel CPU.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1852"
    },
    {
      "cve": "CVE-2022-1882",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in the Linux kernel\u2019s pipes functionality in how a user performs manipulations with the pipe post_one_notification() after free_pipe_info() that is already called. This flaw allows a local user to crash or potentially escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1882"
    },
    {
      "cve": "CVE-2022-2068",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In addition to the c_rehash shell command injection identified in CVE-2022-1292, further circumstances where the c_rehash script does not properly sanitise shell metacharacters to prevent command injection were found by code review. When the CVE-2022-1292 was fixed it was not discovered that there are other places in the script where the file names of certificates being hashed were possibly passed to a command executed through the shell. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2068"
    },
    {
      "cve": "CVE-2022-2078",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in the Linux kernel\u0027s nft_set_desc_concat_parse() function .This flaw allows an attacker to trigger a buffer overflow via nft_set_desc_concat_parse() , causing a denial of service and possibly to run code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2078"
    },
    {
      "cve": "CVE-2022-2097",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "AES OCB mode for 32-bit x86 platforms using the AES-NI assembly optimised implementation will not encrypt the entirety of the data under some circumstances. This could reveal sixteen bytes of data that was preexisting in the memory that wasn\u0027t written. In the special case of \"in place\" encryption, sixteen bytes of the plaintext would be revealed. Since OpenSSL does not support OCB based cipher suites for TLS and DTLS, they are both unaffected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2097"
    },
    {
      "cve": "CVE-2022-2153",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel\u2019s KVM when attempting to set a SynIC IRQ. This issue makes it possible for a misbehaving VMM to write to SYNIC/STIMER MSRs, causing a NULL pointer dereference. This flaw allows an unprivileged local attacker on the host to issue specific ioctl calls, causing a kernel oops condition that results in a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2153"
    },
    {
      "cve": "CVE-2022-2274",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The OpenSSL 3.0.4 release introduced a serious bug in the RSA implementation for X86_64 CPUs supporting the AVX512IFMA instructions. This issue makes the RSA implementation with 2048 bit private keys incorrect on such machines and memory corruption will happen during the computation. As a consequence of the memory corruption an attacker may be able to trigger a remote code execution on the machine performing the computation. SSL/TLS servers or other servers using 2048 bit RSA private keys running on machines supporting AVX512IFMA instructions of the X86_64 architecture are affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2274"
    },
    {
      "cve": "CVE-2022-2327",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "io_uring use work_flags to determine which identity need to grab from the calling process to make sure it is consistent with the calling process when executing IORING_OP. Some operations are missing some types, which can lead to incorrect reference counts which can then lead to a double free. We recommend upgrading the kernel past commit df3f3bb5059d20ef094d6b2f0256c4bf4127a859",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2327"
    },
    {
      "cve": "CVE-2022-2503",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Dm-verity is used for extending root-of-trust to root filesystems. LoadPin builds on this property to restrict module/firmware loads to just the trusted root filesystem. Device-mapper table reloads currently allow users with root privileges to switch out the target with an equivalent dm-linear target and bypass verification till reboot. This allows root to bypass LoadPin and can be used to load untrusted and unverified kernel modules and firmware, which implies arbitrary kernel execution and persistence for peripherals that do not verify firmware updates. We recommend upgrading past commit 4caae58406f8ceb741603eee460d79bacca9b1b5",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2503"
    },
    {
      "cve": "CVE-2022-2586",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in nf_tables cross-table in the net/netfilter/nf_tables_api.c function in the Linux kernel. This flaw allows a local, privileged attacker to cause a use-after-free problem at the time of table deletion, possibly leading to local privilege escalation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2586"
    },
    {
      "cve": "CVE-2022-2588",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Zhenpeng Lin discovered that the network packet scheduler implementation in the Linux kernel did not properly remove all references to a route filter before freeing it in some situations. A local attacker could use this to cause a denial of service (system crash) or execute arbitrary code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2588"
    },
    {
      "cve": "CVE-2022-2602",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel. A race issue occurs between an io_uring request and the Unix socket garbage collector, allowing an attacker local privilege escalation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2602"
    },
    {
      "cve": "CVE-2022-2663",
      "cwe": {
        "id": "CWE-923",
        "name": "Improper Restriction of Communication Channel to Intended Endpoints"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was found in the Linux kernel in nf_conntrack_irc where the message handling can be confused and incorrectly matches the message. A firewall may be able to be bypassed when users are using unencrypted IRC with nf_conntrack_irc configured.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2663"
    },
    {
      "cve": "CVE-2022-2905",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds memory read flaw was found in the Linux kernel\u0027s BPF subsystem in how a user calls the bpf_tail_call function with a key larger than the max_entries of the map. This flaw allows a local user to gain unauthorized access to data.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2905"
    },
    {
      "cve": "CVE-2022-2959",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A race condition was found in the Linux kernel\u0027s watch queue due to a missing lock in pipe_resize_ring(). The specific flaw exists within the handling of pipe buffers. The issue results from the lack of proper locking when performing operations on an object. This flaw allows a local user to crash the system or escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2959"
    },
    {
      "cve": "CVE-2022-2978",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw use after free in the Linux kernel NILFS file system was found in the way user triggers function security_inode_alloc to fail with following call to function nilfs_mdt_destroy. A local user could use this flaw to crash the system or potentially escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2978"
    },
    {
      "cve": "CVE-2022-3028",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A race condition was found in the Linux kernel\u0027s IP framework for transforming packets (XFRM subsystem) when multiple calls to xfrm_probe_algs occurred simultaneously. This flaw could allow a local attacker to potentially trigger an out-of-bounds write or leak kernel heap memory by performing an out-of-bounds read and copying it into a socket.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3028"
    },
    {
      "cve": "CVE-2022-3104",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 5.16-rc6. lkdtm_ARRAY_BOUNDS in drivers/misc/lkdtm/bugs.c lacks check of the return value of kmalloc() and will cause the null pointer dereference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3104"
    },
    {
      "cve": "CVE-2022-3115",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 5.16-rc6. malidp_crtc_reset in drivers/gpu/drm/arm/malidp_crtc.c lacks check of the return value of kzalloc() and will cause the null pointer dereference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3115"
    },
    {
      "cve": "CVE-2022-3169",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel. A denial of service flaw may occur if there is a consecutive request of the NVME_IOCTL_RESET and the NVME_IOCTL_SUBSYS_RESET through the device file of the driver, resulting in a PCIe link disconnect.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3169"
    },
    {
      "cve": "CVE-2022-3303",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A race condition flaw was found in the Linux kernel sound subsystem due to improper locking. It could lead to a NULL pointer dereference while handling the SNDCTL_DSP_SYNC ioctl. A privileged local user (root or member of the audio group) could use this flaw to crash the system, resulting in a denial of service condition",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3303"
    },
    {
      "cve": "CVE-2022-3521",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability has been found in Linux Kernel and classified as problematic. This vulnerability affects the function kcm_tx_work of the file net/kcm/kcmsock.c of the component kcm. The manipulation leads to race condition. It is recommended to apply a patch to fix this issue. VDB-211018 is the identifier assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 2.5,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3521"
    },
    {
      "cve": "CVE-2022-3524",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been declared as problematic. Affected by this vulnerability is the function ipv6_renew_options of the component IPv6 Handler. The manipulation leads to memory leak. The attack can be launched remotely. It is recommended to apply a patch to fix this issue. The identifier VDB-211021 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3524"
    },
    {
      "cve": "CVE-2022-3534",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability classified as critical has been found in Linux Kernel. Affected is the function btf_dump_name_dups of the file tools/lib/bpf/btf_dump.c of the component libbpf. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211032.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3534"
    },
    {
      "cve": "CVE-2022-3545",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability has been found in Linux Kernel and classified as critical. Affected by this vulnerability is the function area_cache_get of the file drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c of the component IPsec. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier VDB-211045 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3545"
    },
    {
      "cve": "CVE-2022-3564",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability classified as critical was found in Linux Kernel. Affected by this vulnerability is the function l2cap_reassemble_sdu of the file net/bluetooth/l2cap_core.c of the component Bluetooth. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-211087.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3564"
    },
    {
      "cve": "CVE-2022-3565",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability, which was classified as critical, has been found in Linux Kernel. Affected by this issue is the function del_timer of the file drivers/isdn/mISDN/l1oip_core.c of the component Bluetooth. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211088.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3565"
    },
    {
      "cve": "CVE-2022-3586",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel\u2019s networking code. A use-after-free was found in the way the sch_sfb enqueue function used the socket buffer (SKB) cb field after the same SKB had been enqueued (and freed) into a child qdisc. This flaw allows a local, unprivileged user to crash the system, causing a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3586"
    },
    {
      "cve": "CVE-2022-3594",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been declared as problematic. Affected by this vulnerability is the function intr_callback of the file drivers/net/usb/r8152.c of the component BPF. The manipulation leads to logging of excessive data. The attack can be launched remotely. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-211363.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3594"
    },
    {
      "cve": "CVE-2022-3606",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been classified as problematic. This affects the function find_prog_by_sec_insn of the file tools/lib/bpf/libbpf.c of the component BPF. The manipulation leads to null pointer dereference. It is recommended to apply a patch to fix this issue. The identifier VDB-211749 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3606"
    },
    {
      "cve": "CVE-2022-3621",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been classified as problematic. Affected is the function nilfs_bmap_lookup_at_level of the file fs/nilfs2/inode.c of the component nilfs2. The manipulation leads to null pointer dereference. It is possible to launch the attack remotely. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211920.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3621"
    },
    {
      "cve": "CVE-2022-3625",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been classified as critical. This affects the function devlink_param_set/devlink_param_get of the file net/core/devlink.c of the component IPsec. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier VDB-211929 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3625"
    },
    {
      "cve": "CVE-2022-3628",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A buffer overflow flaw was found in the Linux kernel Broadcom Full MAC Wi-Fi driver. This issue occurs when a user connects to a malicious USB device. This can allow a local user to crash the system or escalate their privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:P/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3628"
    },
    {
      "cve": "CVE-2022-3629",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been declared as problematic. This vulnerability affects the function vsock_connect of the file net/vmw_vsock/af_vsock.c. The manipulation leads to memory leak. It is recommended to apply a patch to fix this issue. VDB-211930 is the identifier assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3629"
    },
    {
      "cve": "CVE-2022-3633",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability classified as problematic has been found in Linux Kernel. Affected is the function j1939_session_destroy of the file net/can/j1939/transport.c. The manipulation leads to memory leak. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211932.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3633"
    },
    {
      "cve": "CVE-2022-3635",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability, which was classified as critical, has been found in Linux Kernel. Affected by this issue is the function tst_timer of the file drivers/atm/idt77252.c of the component IPsec. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. VDB-211934 is the identifier assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3635"
    },
    {
      "cve": "CVE-2022-3646",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability, which was classified as problematic, has been found in Linux Kernel. This issue affects the function nilfs_attach_log_writer of the file fs/nilfs2/segment.c of the component BPF. The manipulation leads to memory leak. The attack may be initiated remotely. It is recommended to apply a patch to fix this issue. The identifier VDB-211961 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3646"
    },
    {
      "cve": "CVE-2022-3649",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been classified as problematic. Affected is the function nilfs_new_inode of the file fs/nilfs2/inode.c of the component BPF. The manipulation leads to use after free. It is possible to launch the attack remotely. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211992.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3649"
    },
    {
      "cve": "CVE-2022-4095",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in Linux kernel before 5.19.2. This issue occurs in cmd_hdl_filter in drivers/staging/rtl8712/rtl8712_cmd.c, allowing an attacker to launch a local denial of service attack and gain escalation of privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-4095"
    },
    {
      "cve": "CVE-2022-4129",
      "cwe": {
        "id": "CWE-667",
        "name": "Improper Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel\u0027s Layer 2 Tunneling Protocol (L2TP). A missing lock when clearing sk_user_data can lead to a race condition and NULL pointer dereference. A local user could use this flaw to potentially crash the system causing a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-4129"
    },
    {
      "cve": "CVE-2022-4139",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An incorrect TLB flush issue was found in the Linux kernel\u2019s GPU i915 kernel driver, potentially leading to random memory corruption or data leaks. This flaw could allow a local user to crash the system or escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-4139"
    },
    {
      "cve": "CVE-2022-4304",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful decryption an attacker would have to be able to send a very large number of trial messages for decryption. The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An attacker that had observed a genuine connection between a client and a server could use this flaw to send trial messages to the server and record the time taken to process them. After a sufficiently large number of messages the attacker could recover the pre-master secret used for the original connection and thus be able to decrypt the application data sent over that connection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-4304"
    },
    {
      "cve": "CVE-2022-4450",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the \"name\" (e.g. \"CERTIFICATE\"), any header data and the payload data. If the function succeeds then the \"name_out\", \"header\" and \"data\" arguments are populated with pointers to buffers containing the relevant decoded data. The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate the header argument with a pointer to a buffer that has already been freed. If the caller also frees this buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and therefore these functions are also directly affected. These functions are also called indirectly by a number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file() which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL asn1parse command line application is also impacted by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-4450"
    },
    {
      "cve": "CVE-2022-4662",
      "cwe": {
        "id": "CWE-455",
        "name": "Non-exit on Failed Initialization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw incorrect access control in the Linux kernel USB core subsystem was found in the way user attaches usb device. A local user could use this flaw to crash the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-4662"
    },
    {
      "cve": "CVE-2022-20421",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In binder_inc_ref_for_node of binder.c, there is a possible way to corrupt memory due to a use after free. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-239630375References: Upstream kernel",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-20421"
    },
    {
      "cve": "CVE-2022-20422",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In emulation_proc_handler of armv8_deprecated.c, there is a possible way to corrupt memory due to a race condition. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-237540956References: Upstream kernel",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-20422"
    },
    {
      "cve": "CVE-2022-20566",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In l2cap_chan_put of l2cap_core, there is a possible use after free due to improper locking. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-165329981References: Upstream kernel",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-20566"
    },
    {
      "cve": "CVE-2022-20572",
      "cwe": {
        "id": "CWE-863",
        "name": "Incorrect Authorization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In verity_target of dm-verity-target.c, there is a possible way to modify read-only files due to a missing permission check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-234475629References: Upstream kernel",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-20572"
    },
    {
      "cve": "CVE-2022-21123",
      "cwe": {
        "id": "CWE-459",
        "name": "Incomplete Cleanup"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Incomplete cleanup of multi-core shared buffers for some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-21123"
    },
    {
      "cve": "CVE-2022-21125",
      "cwe": {
        "id": "CWE-459",
        "name": "Incomplete Cleanup"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Incomplete cleanup of microarchitectural fill buffers on some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-21125"
    },
    {
      "cve": "CVE-2022-21166",
      "cwe": {
        "id": "CWE-459",
        "name": "Incomplete Cleanup"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Incomplete cleanup in specific special register write operations for some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-21166"
    },
    {
      "cve": "CVE-2022-21505",
      "cwe": {
        "id": "CWE-305",
        "name": "Authentication Bypass by Primary Weakness"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A bug in the IMA subsystem was discovered which would incorrectly allow kexec to be used when kernel lockdown was enabled",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-21505"
    },
    {
      "cve": "CVE-2022-26373",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Non-transparent sharing of return predictor targets between contexts in some Intel(R) Processors may allow an authorized user to potentially enable information disclosure via local access.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-26373"
    },
    {
      "cve": "CVE-2022-32250",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "net/netfilter/nf_tables_api.c in the Linux kernel through 5.18.1 allows a local user (able to create user/net namespaces) to escalate privileges to root because an incorrect NFT_STATEFUL_EXPR check leads to a use-after-free.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-32250"
    },
    {
      "cve": "CVE-2022-32296",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Linux kernel before 5.17.9 allows TCP servers to identify clients by observing what source ports are used. This occurs because of use of Algorithm 4 (\"Double-Hash Port Selection Algorithm\") of RFC 6056.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-32296"
    },
    {
      "cve": "CVE-2022-34918",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 5.18.9. A type confusion bug in nft_set_elem_init (leading to a buffer overflow) could be used by a local attacker to escalate privileges, a different vulnerability than CVE-2022-32250. (The attacker can obtain root access, but must start with an unprivileged user namespace to obtain CAP_NET_ADMIN access.) This can be fixed in nft_setelem_parse_data in net/netfilter/nf_tables_api.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-34918"
    },
    {
      "cve": "CVE-2022-36123",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Linux kernel before 5.18.13 lacks a certain clear operation for the block starting symbol (.bss). This allows Xen PV guest OS users to cause a denial of service or gain privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-36123"
    },
    {
      "cve": "CVE-2022-36280",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds(OOB) memory access vulnerability was found in vmwgfx driver in drivers/gpu/vmxgfx/vmxgfx_kms.c in GPU component in the Linux kernel with device file \u0027/dev/dri/renderD128 (or Dxxx)\u0027. This flaw allows a local attacker with a user account on the system to gain privilege, causing a denial of service(DoS).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-36280"
    },
    {
      "cve": "CVE-2022-36879",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 5.18.14. xfrm_expand_policies in net/xfrm/xfrm_policy.c can cause a refcount to be dropped twice.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-36879"
    },
    {
      "cve": "CVE-2022-36946",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nfqnl_mangle in net/netfilter/nfnetlink_queue.c in the Linux kernel through 5.18.14 allows remote attackers to cause a denial of service (panic) because, in the case of an nf_queue verdict with a one-byte nfta_payload attribute, an skb_pull can encounter a negative skb-\u003elen.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-36946"
    },
    {
      "cve": "CVE-2022-39188",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in include/asm-generic/tlb.h in the Linux kernel before 5.19. Because of a race condition (unmap_mapping_range versus munmap), a device driver can free a page while it still has stale TLB entries. This only occurs in situations with VM_PFNMAP VMAs.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-39188"
    },
    {
      "cve": "CVE-2022-39190",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in net/netfilter/nf_tables_api.c in the Linux kernel before 5.19.6. A denial of service can occur upon binding to an already bound chain.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-39190"
    },
    {
      "cve": "CVE-2022-40307",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 5.19.8. drivers/firmware/efi/capsule-loader.c has a race condition with a resultant use-after-free.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-40307"
    },
    {
      "cve": "CVE-2022-40768",
      "cwe": {
        "id": "CWE-668",
        "name": "Exposure of Resource to Wrong Sphere"
      },
      "notes": [
        {
          "category": "summary",
          "text": "drivers/scsi/stex.c in the Linux kernel through 5.19.9 allows local users to obtain sensitive information from kernel memory because stex_queuecommand_lck lacks a memset for the PASSTHRU_CMD case.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-40768"
    },
    {
      "cve": "CVE-2022-41218",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In drivers/media/dvb-core/dmxdev.c in the Linux kernel through 5.19.10, there is a use-after-free caused by refcount races, affecting dvb_demux_open and dvb_dmxdev_release.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-41218"
    },
    {
      "cve": "CVE-2022-41222",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "mm/mremap.c in the Linux kernel before 5.13.3 has a use-after-free via a stale TLB because an rmap lock is not held during a PUD move.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-41222"
    },
    {
      "cve": "CVE-2022-41674",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel before 5.19.16. Attackers able to inject WLAN frames could cause a buffer overflow in the ieee80211_bss_info_update function in net/mac80211/scan.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-41674"
    },
    {
      "cve": "CVE-2022-41849",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "drivers/video/fbdev/smscufx.c in the Linux kernel through 5.19.12 has a race condition and resultant use-after-free if a physically proximate attacker removes a USB device while calling open(), aka a race condition between ufx_ops_open and ufx_usb_disconnect.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.2,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:P/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-41849"
    },
    {
      "cve": "CVE-2022-41850",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "roccat_report_event in drivers/hid/hid-roccat.c in the Linux kernel through 5.19.12 has a race condition and resultant use-after-free in certain situations where a report is received while copying a report-\u003evalue is in progress.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-41850"
    },
    {
      "cve": "CVE-2022-42328",
      "cwe": {
        "id": "CWE-667",
        "name": "Improper Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Guests can trigger deadlock in Linux netback driver [This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] The patch for XSA-392 introduced another issue which might result in a deadlock when trying to free the SKB of a packet dropped due to the XSA-392 handling (CVE-2022-42328). Additionally when dropping packages for other reasons the same deadlock could occur in case of netpoll being active for the interface the xen-netback driver is connected to (CVE-2022-42329).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42328"
    },
    {
      "cve": "CVE-2022-42329",
      "cwe": {
        "id": "CWE-667",
        "name": "Improper Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Guests can trigger deadlock in Linux netback drive. The patch for XSA-392 introduced another issue which might result in a deadlock when trying to free the SKB of a packet dropped due to the XSA-392 handling (CVE-2022-42328). Additionally when dropping packages for other reasons the same deadlock could occur in case of netpoll being active for the interface the xen-netback driver is connected to (CVE-2022-42329).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42329"
    },
    {
      "cve": "CVE-2022-42432",
      "cwe": {
        "id": "CWE-457",
        "name": "Use of Uninitialized Variable"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This vulnerability allows local attackers to disclose sensitive information on affected installations of the Linux Kernel 6.0-rc2. An attacker must first obtain the ability to execute high-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the nft_osf_eval function. The issue results from the lack of proper initialization of memory prior to accessing it. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of the kernel. Was ZDI-CAN-18540.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42432"
    },
    {
      "cve": "CVE-2022-42703",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "mm/rmap.c in the Linux kernel before 5.19.7 has a use-after-free related to leaf anon_vma double reuse.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42703"
    },
    {
      "cve": "CVE-2022-42719",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free in the mac80211 stack when parsing a multi-BSSID element in the Linux kernel 5.2 through 5.19.x before 5.19.16 could be used by attackers (able to inject WLAN frames) to crash the kernel and potentially execute code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42719"
    },
    {
      "cve": "CVE-2022-42720",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Various refcounting bugs in the multi-BSS handling in the mac80211 stack in the Linux kernel 5.1 through 5.19.x before 5.19.16 could be used by local attackers (able to inject WLAN frames) to trigger use-after-free conditions to potentially execute code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42720"
    },
    {
      "cve": "CVE-2022-42721",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A list management bug in BSS handling in the mac80211 stack in the Linux kernel 5.1 through 5.19.x before 5.19.16 could be used by local attackers (able to inject WLAN frames) to corrupt a linked list and, in turn, potentially execute code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42721"
    },
    {
      "cve": "CVE-2022-42722",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel 5.8 through 5.19.x before 5.19.16, local attackers able to inject WLAN frames into the mac80211 stack could cause a NULL pointer dereference denial-of-service attack against the beacon protection of P2P devices.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42722"
    },
    {
      "cve": "CVE-2022-42895",
      "cwe": {
        "id": "CWE-824",
        "name": "Access of Uninitialized Pointer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is an infoleak vulnerability in the Linux kernel\u0027s net/bluetooth/l2cap_core.c\u0027s l2cap_parse_conf_req function which can be used to leak kernel pointers remotely. We recommend upgrading past commit https://github.com/torvalds/linux/commit/b1a2cd50c0357f243b7435a732b4e62ba3157a2e",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42895"
    },
    {
      "cve": "CVE-2022-42896",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There are use-after-free vulnerabilities in the Linux kernel\u0027s net/bluetooth/l2cap_core.c\u0027s l2cap_connect and l2cap_le_connect_req functions which may allow code execution and leaking kernel memory (respectively) remotely via Bluetooth. A remote attacker could execute code leaking kernel memory via Bluetooth if within proximity of the victim. We recommend upgrading past commit https://github.com/torvalds/linux/commit/711f8c3fb3db61897080468586b970c87c61d9e4",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42896"
    },
    {
      "cve": "CVE-2022-43750",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "drivers/usb/mon/mon_bin.c in usbmon in the Linux kernel before 5.19.15 and 6.x before 6.0.1 allows a user-space client to corrupt the monitor\u0027s internal memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-43750"
    },
    {
      "cve": "CVE-2022-47518",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel before 6.0.11. Missing validation of the number of channels in drivers/net/wireless/microchip/wilc1000/cfg80211.c in the WILC1000 wireless driver can trigger a heap-based buffer overflow when copying the list of operating channels from Wi-Fi management frames.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-47518"
    },
    {
      "cve": "CVE-2022-47520",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel before 6.0.11. Missing offset validation in drivers/net/wireless/microchip/wilc1000/hif.c in the WILC1000 wireless driver can trigger an out-of-bounds read when parsing a Robust Security Network (RSN) information element from a Netlink packet.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-47520"
    },
    {
      "cve": "CVE-2022-47929",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel before 6.1.6, a NULL pointer dereference bug in the traffic control subsystem allows an unprivileged user to trigger a denial of service (system crash) via a crafted traffic control configuration that is set up with \"tc qdisc\" and \"tc class\" commands. This affects qdisc_graft in net/sched/sch_api.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-47929"
    },
    {
      "cve": "CVE-2022-47946",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel 5.10.x before 5.10.155. A use-after-free in io_sqpoll_wait_sq in fs/io_uring.c allows an attacker to crash the kernel, resulting in denial of service. finish_wait can be skipped. An attack can occur in some situations by forking a process and then quickly terminating it. NOTE: later kernel versions, such as the 5.15 longterm series, substantially changed the implementation of io_sqpoll_wait_sq.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-47946"
    },
    {
      "cve": "CVE-2023-0215",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may also be called directly by end user applications. The function receives a BIO from the caller, prepends a new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid, the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call BIO_pop() on the BIO. This internal function is in turn called by the public API functions PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1, SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL cms and smime command line applications are similarly affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-0215"
    },
    {
      "cve": "CVE-2023-0286",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName. X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these inputs, the other input must already contain an X.400 address as a CRL distribution point, which is uncommon. As such, this vulnerability is most likely to only affect applications which have implemented their own functionality for retrieving CRLs over a network.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-0286"
    },
    {
      "cve": "CVE-2023-0464",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security vulnerability has been identified in all supported versions of OpenSSL related to the verification of X.509 certificate chains that include policy constraints. Attackers may be able to exploit this vulnerability by creating a malicious certificate chain that triggers exponential use of computational resources, leading to a denial-of-service (DoS) attack on affected systems. Policy processing is disabled by default but can be enabled by passing the `-policy\u0027 argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()\u0027 function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-0464"
    },
    {
      "cve": "CVE-2023-0465",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Applications that use a non-default option when verifying certificates may be\nvulnerable to an attack from a malicious CA to circumvent certain checks.\n\nInvalid certificate policies in leaf certificates are silently ignored by\nOpenSSL and other certificate policy checks are skipped for that certificate.\nA malicious CA could use this to deliberately assert invalid certificate policies\nin order to circumvent policy checking on the certificate altogether.\n\nPolicy processing is disabled by default but can be enabled by passing\nthe `-policy\u0027 argument to the command line utilities or by calling the\n`X509_VERIFY_PARAM_set1_policies()\u0027 function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-0465"
    },
    {
      "cve": "CVE-2023-0466",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function X509_VERIFY_PARAM_add0_policy() is documented to\nimplicitly enable the certificate policy check when doing certificate\nverification. However the implementation of the function does not\nenable the check which allows certificates with invalid or incorrect\npolicies to pass the certificate verification.\n\nAs suddenly enabling the policy check could break existing deployments it was\ndecided to keep the existing behavior of the X509_VERIFY_PARAM_add0_policy()\nfunction.\n\nInstead the applications that require OpenSSL to perform certificate\npolicy check need to use X509_VERIFY_PARAM_set1_policies() or explicitly\nenable the policy check by calling X509_VERIFY_PARAM_set_flags() with\nthe X509_V_FLAG_POLICY_CHECK flag argument.\n\nCertificate policy checks are disabled by default in OpenSSL and are not\ncommonly used by applications.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-0466"
    },
    {
      "cve": "CVE-2023-0590",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in qdisc_graft in net/sched/sch_api.c in the Linux Kernel due to a race problem. This flaw leads to a denial of service issue. If patch ebda44da44f6 (\"net: sched: fix race condition in qdisc_graft()\") not applied yet, then kernel could be affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-0590"
    },
    {
      "cve": "CVE-2023-1077",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, pick_next_rt_entity() may return a type confused entry, not detected by the BUG_ON condition, as the confused entry will not be NULL, but list_head.The buggy error condition would lead to a type confused entry with the list head,which would then be used as a type confused sched_rt_entity,causing memory corruption.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-1077"
    },
    {
      "cve": "CVE-2023-1095",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In nf_tables_updtable, if nf_tables_table_enable returns an error, nft_trans_destroy is called to free the transaction object. nft_trans_destroy() calls list_del(), but the transaction was never placed on a list -- the list head is all zeroes, this results in a NULL pointer dereference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-1095"
    },
    {
      "cve": "CVE-2023-23454",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "cbq_classify in net/sched/sch_cbq.c in the Linux kernel through 6.1.4 allows attackers to cause a denial of service (slab-out-of-bounds read) because of type confusion (non-negative numbers can sometimes indicate a TC_ACT_SHOT condition rather than valid classification results).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-23454"
    },
    {
      "cve": "CVE-2023-23455",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "atm_tc_enqueue in net/sched/sch_atm.c in the Linux kernel through 6.1.4 allows attackers to cause a denial of service because of type confusion (non-negative numbers can sometimes indicate a TC_ACT_SHOT condition rather than valid classification results).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-23455"
    },
    {
      "cve": "CVE-2023-23559",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In rndis_query_oid in drivers/net/wireless/rndis_wlan.c in the Linux kernel through 6.1.5, there is an integer overflow in an addition.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-23559"
    },
    {
      "cve": "CVE-2023-26607",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel 6.0.8, there is an out-of-bounds read in ntfs_attr_find in fs/ntfs/attrib.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-26607"
    }
  ]
}

{
  "document": {
    "acknowledgments": [
      {
        "organization": "Siemens ProductCERT",
        "summary": "reporting these vulnerabilities to CISA."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited",
      "tlp": {
        "label": "WHITE",
        "url": "https://us-cert.cisa.gov/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "general",
        "text": "This CSAF advisory was extracted from unstructured data and may contain inaccuracies. If you notice any errors, please reach out to the designated contact at CISA CSAF: central@cisa.dhs.gov",
        "title": "CISA Disclaimer"
      },
      {
        "category": "summary",
        "text": "Multiple vulnerabilities have been identified in the Linux Kernel of the SIMATIC S7-1500 TM MFP V1.0.\n\nSiemens is preparing updates and recommends specific countermeasures for products where updates are not, or not yet available.",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "Siemens Security Advisories are subject to the terms and conditions contained in Siemens\u0027 underlying license terms or other applicable agreements previously agreed to with Siemens (hereinafter \"License Terms\"). To the extent applicable to information, software or documentation made available in or through a Siemens Security Advisory, the Terms of Use of Siemens\u0027 Global Website (https://www.siemens.com/terms_of_use, hereinafter \"Terms of Use\"), in particular Sections 8-10 of the Terms of Use, shall apply additionally. In case of conflicts, the License Terms shall prevail over the Terms of Use.",
        "title": "Terms of Use"
      },
      {
        "category": "legal_disclaimer",
        "text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
        "title": "Legal Notice"
      },
      {
        "category": "other",
        "text": "This CISA CSAF advisory was converted from Siemens ProductCERT\u0027s CSAF advisory.",
        "title": "Advisory Conversion Disclaimer"
      },
      {
        "category": "other",
        "text": "Multiple",
        "title": "Critical infrastructure sectors"
      },
      {
        "category": "other",
        "text": "Worldwide",
        "title": "Countries/areas deployed"
      },
      {
        "category": "other",
        "text": "Germany",
        "title": "Company headquarters location"
      },
      {
        "category": "general",
        "text": "CISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Minimizing network exposure for all control system devices and/or systems, ensuring they are not accessible from the internet.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Locating control system networks and remote devices behind firewalls and isolating them from business networks.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "When remote access is required, using more secure methods, such as Virtual Private Networks (VPNs). Recognize VPNs may have vulnerabilities, should be updated to the most recent version available, and are only as secure as the connected devices.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.",
        "title": "Recommended Practices"
      },
      {
        "category": "other",
        "text": "No known public exploits specifically target these vulnerabilities.",
        "title": "Exploitability"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "Email: CISAservicedesk@cisa.dhs.gov;\n Toll Free: 1-888-282-0870",
      "name": "CISA",
      "namespace": "https://www.cisa.gov/"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-794697: Vulnerabilities in the Linux Kernel of the SIMATIC S7-1500 TM MFP V1.0 - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-794697.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-23-166-11 JSON",
        "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2023/icsa-23-166-11.json"
      },
      {
        "category": "self",
        "summary": "SSA-794697: Vulnerabilities in the Linux Kernel of the SIMATIC S7-1500 TM MFP V1.0 - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-794697.html"
      },
      {
        "category": "self",
        "summary": "SSA-794697: Vulnerabilities in the Linux Kernel of the SIMATIC S7-1500 TM MFP V1.0 - PDF Version",
        "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-794697.pdf"
      },
      {
        "category": "self",
        "summary": "SSA-794697: Vulnerabilities in the Linux Kernel of the SIMATIC S7-1500 TM MFP V1.0 - TXT Version",
        "url": "https://cert-portal.siemens.com/productcert/txt/ssa-794697.txt"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-23-166-11 - Web Version",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-23-166-11"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/alerts/ICS-ALERT-10-301-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/resources-tools/resources/ics-recommended-practices"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/topics/industrial-control-systems"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/sites/default/files/publications/Cybersecurity_Best_Practices_for_Industrial_Control_Systems.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/tips/ICS-TIP-12-146-01B"
      }
    ],
    "title": "Siemens SIMATIC S7-1500 TM MFP Linux Kernel",
    "tracking": {
      "current_release_date": "2023-06-13T00:00:00.000000Z",
      "generator": {
        "engine": {
          "name": "CISA CSAF Generator",
          "version": "1"
        }
      },
      "id": "ICSA-23-166-11",
      "initial_release_date": "2023-06-13T00:00:00.000000Z",
      "revision_history": [
        {
          "date": "2023-06-13T00:00:00.000000Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        }
      ],
      "status": "interim",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/*",
                "product": {
                  "name": "SIMATIC S7-1500 TM MFP - Linux Kernel",
                  "product_id": "1"
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 TM MFP - Linux Kernel"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2021-3759",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A memory overflow vulnerability was found in the Linux kernel\u2019s ipc functionality of the memcg subsystem, in the way a user calls the semget function multiple times, creating semaphores. This flaw allows a local user to starve the resources, causing a denial of service. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2021-3759"
    },
    {
      "cve": "CVE-2021-4037",
      "cwe": {
        "id": "CWE-284",
        "name": "Improper Access Control"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in the fs/inode.c:inode_init_owner() function logic of the LInux kernel that allows local users to create files for the XFS file-system with an unintended group ownership and with group execution and SGID permission bits set, in a scenario where a directory is SGID and belongs to a certain group and is writable by a user who is not a member of this group. This can lead to excessive permissions granted in case when they should not. This vulnerability is similar to the previous CVE-2018-13405 and adds the missed fix for the XFS.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2021-4037"
    },
    {
      "cve": "CVE-2021-33655",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When sending malicous data to kernel by ioctl cmd FBIOPUT_VSCREENINFO,kernel will write memory out of bounds.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2021-33655"
    },
    {
      "cve": "CVE-2022-0171",
      "cwe": {
        "id": "CWE-459",
        "name": "Incomplete Cleanup"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel. The existing KVM SEV API has a vulnerability that allows a non-root (host) user-level application to crash the host kernel by creating a confidential guest VM instance in AMD CPU that supports Secure Encrypted Virtualization (SEV).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-0171"
    },
    {
      "cve": "CVE-2022-1012",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A memory leak problem was found in the TCP source port generation algorithm in net/ipv4/tcp.c due to the small table perturb size. This flaw may allow an attacker to information leak and may cause a denial of service problem.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1012"
    },
    {
      "cve": "CVE-2022-1184",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in fs/ext4/namei.c:dx_insert_block() in the Linux kernel\u2019s filesystem sub-component. This flaw allows a local attacker with a user privilege to cause a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1184"
    },
    {
      "cve": "CVE-2022-1292",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The c_rehash script does not properly sanitise shell metacharacters to prevent command injection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1292"
    },
    {
      "cve": "CVE-2022-1343",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Under certain circumstances, the command line OCSP verify function reports successful verification when the verification in fact failed. In this case the incorrect successful response will also be accompanied by error messages showing the failure and contradicting the apparently successful result.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1343"
    },
    {
      "cve": "CVE-2022-1434",
      "cwe": {
        "id": "CWE-327",
        "name": "Use of a Broken or Risky Cryptographic Algorithm"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When using the RC4-MD5 ciphersuite, which is disabled by default, an attacker is able to modify data in transit due to an incorrect use of the AAD data as the MAC key in OpenSSL 3.0. An attacker is not able to decrypt any communication.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1434"
    },
    {
      "cve": "CVE-2022-1462",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds read flaw was found in the Linux kernel\u2019s TeleTYpe subsystem. The issue occurs in how a user triggers a race condition using ioctls TIOCSPTLCK and TIOCGPTPEER and TIOCSTI and TCXONC with leakage of memory in the flush_to_ldisc function. This flaw allows a local user to crash the system or read unauthorized random data from memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1462"
    },
    {
      "cve": "CVE-2022-1473",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The used OpenSSL version improperly reuses memory when decoding certificates or keys. This can lead to a process termination and Denial of Service for long lived processes.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1473"
    },
    {
      "cve": "CVE-2022-1679",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in the Linux kernel\u2019s Atheros wireless adapter driver in the way a user forces the ath9k_htc_wait_for_target function to fail with some input messages. This flaw allows a local user to crash or potentially escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1679"
    },
    {
      "cve": "CVE-2022-1852",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference flaw was found in the Linux kernel\u2019s KVM module, which can lead to a denial of service in the x86_emulate_insn in arch/x86/kvm/emulate.c. This flaw occurs while executing an illegal instruction in guest in the Intel CPU.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1852"
    },
    {
      "cve": "CVE-2022-1882",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in the Linux kernel\u2019s pipes functionality in how a user performs manipulations with the pipe post_one_notification() after free_pipe_info() that is already called. This flaw allows a local user to crash or potentially escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1882"
    },
    {
      "cve": "CVE-2022-2068",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In addition to the c_rehash shell command injection identified in CVE-2022-1292, further circumstances where the c_rehash script does not properly sanitise shell metacharacters to prevent command injection were found by code review. When the CVE-2022-1292 was fixed it was not discovered that there are other places in the script where the file names of certificates being hashed were possibly passed to a command executed through the shell. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2068"
    },
    {
      "cve": "CVE-2022-2078",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in the Linux kernel\u0027s nft_set_desc_concat_parse() function .This flaw allows an attacker to trigger a buffer overflow via nft_set_desc_concat_parse() , causing a denial of service and possibly to run code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2078"
    },
    {
      "cve": "CVE-2022-2097",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "AES OCB mode for 32-bit x86 platforms using the AES-NI assembly optimised implementation will not encrypt the entirety of the data under some circumstances. This could reveal sixteen bytes of data that was preexisting in the memory that wasn\u0027t written. In the special case of \"in place\" encryption, sixteen bytes of the plaintext would be revealed. Since OpenSSL does not support OCB based cipher suites for TLS and DTLS, they are both unaffected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2097"
    },
    {
      "cve": "CVE-2022-2153",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel\u2019s KVM when attempting to set a SynIC IRQ. This issue makes it possible for a misbehaving VMM to write to SYNIC/STIMER MSRs, causing a NULL pointer dereference. This flaw allows an unprivileged local attacker on the host to issue specific ioctl calls, causing a kernel oops condition that results in a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2153"
    },
    {
      "cve": "CVE-2022-2274",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The OpenSSL 3.0.4 release introduced a serious bug in the RSA implementation for X86_64 CPUs supporting the AVX512IFMA instructions. This issue makes the RSA implementation with 2048 bit private keys incorrect on such machines and memory corruption will happen during the computation. As a consequence of the memory corruption an attacker may be able to trigger a remote code execution on the machine performing the computation. SSL/TLS servers or other servers using 2048 bit RSA private keys running on machines supporting AVX512IFMA instructions of the X86_64 architecture are affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2274"
    },
    {
      "cve": "CVE-2022-2327",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "io_uring use work_flags to determine which identity need to grab from the calling process to make sure it is consistent with the calling process when executing IORING_OP. Some operations are missing some types, which can lead to incorrect reference counts which can then lead to a double free. We recommend upgrading the kernel past commit df3f3bb5059d20ef094d6b2f0256c4bf4127a859",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2327"
    },
    {
      "cve": "CVE-2022-2503",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Dm-verity is used for extending root-of-trust to root filesystems. LoadPin builds on this property to restrict module/firmware loads to just the trusted root filesystem. Device-mapper table reloads currently allow users with root privileges to switch out the target with an equivalent dm-linear target and bypass verification till reboot. This allows root to bypass LoadPin and can be used to load untrusted and unverified kernel modules and firmware, which implies arbitrary kernel execution and persistence for peripherals that do not verify firmware updates. We recommend upgrading past commit 4caae58406f8ceb741603eee460d79bacca9b1b5",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2503"
    },
    {
      "cve": "CVE-2022-2586",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in nf_tables cross-table in the net/netfilter/nf_tables_api.c function in the Linux kernel. This flaw allows a local, privileged attacker to cause a use-after-free problem at the time of table deletion, possibly leading to local privilege escalation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2586"
    },
    {
      "cve": "CVE-2022-2588",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Zhenpeng Lin discovered that the network packet scheduler implementation in the Linux kernel did not properly remove all references to a route filter before freeing it in some situations. A local attacker could use this to cause a denial of service (system crash) or execute arbitrary code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2588"
    },
    {
      "cve": "CVE-2022-2602",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel. A race issue occurs between an io_uring request and the Unix socket garbage collector, allowing an attacker local privilege escalation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2602"
    },
    {
      "cve": "CVE-2022-2663",
      "cwe": {
        "id": "CWE-923",
        "name": "Improper Restriction of Communication Channel to Intended Endpoints"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was found in the Linux kernel in nf_conntrack_irc where the message handling can be confused and incorrectly matches the message. A firewall may be able to be bypassed when users are using unencrypted IRC with nf_conntrack_irc configured.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2663"
    },
    {
      "cve": "CVE-2022-2905",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds memory read flaw was found in the Linux kernel\u0027s BPF subsystem in how a user calls the bpf_tail_call function with a key larger than the max_entries of the map. This flaw allows a local user to gain unauthorized access to data.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2905"
    },
    {
      "cve": "CVE-2022-2959",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A race condition was found in the Linux kernel\u0027s watch queue due to a missing lock in pipe_resize_ring(). The specific flaw exists within the handling of pipe buffers. The issue results from the lack of proper locking when performing operations on an object. This flaw allows a local user to crash the system or escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2959"
    },
    {
      "cve": "CVE-2022-2978",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw use after free in the Linux kernel NILFS file system was found in the way user triggers function security_inode_alloc to fail with following call to function nilfs_mdt_destroy. A local user could use this flaw to crash the system or potentially escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2978"
    },
    {
      "cve": "CVE-2022-3028",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A race condition was found in the Linux kernel\u0027s IP framework for transforming packets (XFRM subsystem) when multiple calls to xfrm_probe_algs occurred simultaneously. This flaw could allow a local attacker to potentially trigger an out-of-bounds write or leak kernel heap memory by performing an out-of-bounds read and copying it into a socket.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3028"
    },
    {
      "cve": "CVE-2022-3104",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 5.16-rc6. lkdtm_ARRAY_BOUNDS in drivers/misc/lkdtm/bugs.c lacks check of the return value of kmalloc() and will cause the null pointer dereference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3104"
    },
    {
      "cve": "CVE-2022-3115",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 5.16-rc6. malidp_crtc_reset in drivers/gpu/drm/arm/malidp_crtc.c lacks check of the return value of kzalloc() and will cause the null pointer dereference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3115"
    },
    {
      "cve": "CVE-2022-3169",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel. A denial of service flaw may occur if there is a consecutive request of the NVME_IOCTL_RESET and the NVME_IOCTL_SUBSYS_RESET through the device file of the driver, resulting in a PCIe link disconnect.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3169"
    },
    {
      "cve": "CVE-2022-3303",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A race condition flaw was found in the Linux kernel sound subsystem due to improper locking. It could lead to a NULL pointer dereference while handling the SNDCTL_DSP_SYNC ioctl. A privileged local user (root or member of the audio group) could use this flaw to crash the system, resulting in a denial of service condition",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3303"
    },
    {
      "cve": "CVE-2022-3521",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability has been found in Linux Kernel and classified as problematic. This vulnerability affects the function kcm_tx_work of the file net/kcm/kcmsock.c of the component kcm. The manipulation leads to race condition. It is recommended to apply a patch to fix this issue. VDB-211018 is the identifier assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 2.5,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3521"
    },
    {
      "cve": "CVE-2022-3524",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been declared as problematic. Affected by this vulnerability is the function ipv6_renew_options of the component IPv6 Handler. The manipulation leads to memory leak. The attack can be launched remotely. It is recommended to apply a patch to fix this issue. The identifier VDB-211021 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3524"
    },
    {
      "cve": "CVE-2022-3534",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability classified as critical has been found in Linux Kernel. Affected is the function btf_dump_name_dups of the file tools/lib/bpf/btf_dump.c of the component libbpf. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211032.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3534"
    },
    {
      "cve": "CVE-2022-3545",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability has been found in Linux Kernel and classified as critical. Affected by this vulnerability is the function area_cache_get of the file drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c of the component IPsec. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier VDB-211045 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3545"
    },
    {
      "cve": "CVE-2022-3564",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability classified as critical was found in Linux Kernel. Affected by this vulnerability is the function l2cap_reassemble_sdu of the file net/bluetooth/l2cap_core.c of the component Bluetooth. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-211087.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3564"
    },
    {
      "cve": "CVE-2022-3565",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability, which was classified as critical, has been found in Linux Kernel. Affected by this issue is the function del_timer of the file drivers/isdn/mISDN/l1oip_core.c of the component Bluetooth. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211088.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3565"
    },
    {
      "cve": "CVE-2022-3586",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel\u2019s networking code. A use-after-free was found in the way the sch_sfb enqueue function used the socket buffer (SKB) cb field after the same SKB had been enqueued (and freed) into a child qdisc. This flaw allows a local, unprivileged user to crash the system, causing a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3586"
    },
    {
      "cve": "CVE-2022-3594",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been declared as problematic. Affected by this vulnerability is the function intr_callback of the file drivers/net/usb/r8152.c of the component BPF. The manipulation leads to logging of excessive data. The attack can be launched remotely. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-211363.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3594"
    },
    {
      "cve": "CVE-2022-3606",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been classified as problematic. This affects the function find_prog_by_sec_insn of the file tools/lib/bpf/libbpf.c of the component BPF. The manipulation leads to null pointer dereference. It is recommended to apply a patch to fix this issue. The identifier VDB-211749 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3606"
    },
    {
      "cve": "CVE-2022-3621",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been classified as problematic. Affected is the function nilfs_bmap_lookup_at_level of the file fs/nilfs2/inode.c of the component nilfs2. The manipulation leads to null pointer dereference. It is possible to launch the attack remotely. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211920.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3621"
    },
    {
      "cve": "CVE-2022-3625",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been classified as critical. This affects the function devlink_param_set/devlink_param_get of the file net/core/devlink.c of the component IPsec. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier VDB-211929 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3625"
    },
    {
      "cve": "CVE-2022-3628",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A buffer overflow flaw was found in the Linux kernel Broadcom Full MAC Wi-Fi driver. This issue occurs when a user connects to a malicious USB device. This can allow a local user to crash the system or escalate their privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:P/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3628"
    },
    {
      "cve": "CVE-2022-3629",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been declared as problematic. This vulnerability affects the function vsock_connect of the file net/vmw_vsock/af_vsock.c. The manipulation leads to memory leak. It is recommended to apply a patch to fix this issue. VDB-211930 is the identifier assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3629"
    },
    {
      "cve": "CVE-2022-3633",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability classified as problematic has been found in Linux Kernel. Affected is the function j1939_session_destroy of the file net/can/j1939/transport.c. The manipulation leads to memory leak. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211932.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3633"
    },
    {
      "cve": "CVE-2022-3635",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability, which was classified as critical, has been found in Linux Kernel. Affected by this issue is the function tst_timer of the file drivers/atm/idt77252.c of the component IPsec. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. VDB-211934 is the identifier assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3635"
    },
    {
      "cve": "CVE-2022-3646",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability, which was classified as problematic, has been found in Linux Kernel. This issue affects the function nilfs_attach_log_writer of the file fs/nilfs2/segment.c of the component BPF. The manipulation leads to memory leak. The attack may be initiated remotely. It is recommended to apply a patch to fix this issue. The identifier VDB-211961 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3646"
    },
    {
      "cve": "CVE-2022-3649",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been classified as problematic. Affected is the function nilfs_new_inode of the file fs/nilfs2/inode.c of the component BPF. The manipulation leads to use after free. It is possible to launch the attack remotely. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211992.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3649"
    },
    {
      "cve": "CVE-2022-4095",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in Linux kernel before 5.19.2. This issue occurs in cmd_hdl_filter in drivers/staging/rtl8712/rtl8712_cmd.c, allowing an attacker to launch a local denial of service attack and gain escalation of privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-4095"
    },
    {
      "cve": "CVE-2022-4129",
      "cwe": {
        "id": "CWE-667",
        "name": "Improper Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel\u0027s Layer 2 Tunneling Protocol (L2TP). A missing lock when clearing sk_user_data can lead to a race condition and NULL pointer dereference. A local user could use this flaw to potentially crash the system causing a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-4129"
    },
    {
      "cve": "CVE-2022-4139",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An incorrect TLB flush issue was found in the Linux kernel\u2019s GPU i915 kernel driver, potentially leading to random memory corruption or data leaks. This flaw could allow a local user to crash the system or escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-4139"
    },
    {
      "cve": "CVE-2022-4304",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful decryption an attacker would have to be able to send a very large number of trial messages for decryption. The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An attacker that had observed a genuine connection between a client and a server could use this flaw to send trial messages to the server and record the time taken to process them. After a sufficiently large number of messages the attacker could recover the pre-master secret used for the original connection and thus be able to decrypt the application data sent over that connection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-4304"
    },
    {
      "cve": "CVE-2022-4450",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the \"name\" (e.g. \"CERTIFICATE\"), any header data and the payload data. If the function succeeds then the \"name_out\", \"header\" and \"data\" arguments are populated with pointers to buffers containing the relevant decoded data. The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate the header argument with a pointer to a buffer that has already been freed. If the caller also frees this buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and therefore these functions are also directly affected. These functions are also called indirectly by a number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file() which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL asn1parse command line application is also impacted by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-4450"
    },
    {
      "cve": "CVE-2022-4662",
      "cwe": {
        "id": "CWE-455",
        "name": "Non-exit on Failed Initialization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw incorrect access control in the Linux kernel USB core subsystem was found in the way user attaches usb device. A local user could use this flaw to crash the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-4662"
    },
    {
      "cve": "CVE-2022-20421",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In binder_inc_ref_for_node of binder.c, there is a possible way to corrupt memory due to a use after free. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-239630375References: Upstream kernel",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-20421"
    },
    {
      "cve": "CVE-2022-20422",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In emulation_proc_handler of armv8_deprecated.c, there is a possible way to corrupt memory due to a race condition. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-237540956References: Upstream kernel",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-20422"
    },
    {
      "cve": "CVE-2022-20566",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In l2cap_chan_put of l2cap_core, there is a possible use after free due to improper locking. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-165329981References: Upstream kernel",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-20566"
    },
    {
      "cve": "CVE-2022-20572",
      "cwe": {
        "id": "CWE-863",
        "name": "Incorrect Authorization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In verity_target of dm-verity-target.c, there is a possible way to modify read-only files due to a missing permission check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-234475629References: Upstream kernel",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-20572"
    },
    {
      "cve": "CVE-2022-21123",
      "cwe": {
        "id": "CWE-459",
        "name": "Incomplete Cleanup"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Incomplete cleanup of multi-core shared buffers for some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-21123"
    },
    {
      "cve": "CVE-2022-21125",
      "cwe": {
        "id": "CWE-459",
        "name": "Incomplete Cleanup"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Incomplete cleanup of microarchitectural fill buffers on some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-21125"
    },
    {
      "cve": "CVE-2022-21166",
      "cwe": {
        "id": "CWE-459",
        "name": "Incomplete Cleanup"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Incomplete cleanup in specific special register write operations for some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-21166"
    },
    {
      "cve": "CVE-2022-21505",
      "cwe": {
        "id": "CWE-305",
        "name": "Authentication Bypass by Primary Weakness"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A bug in the IMA subsystem was discovered which would incorrectly allow kexec to be used when kernel lockdown was enabled",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-21505"
    },
    {
      "cve": "CVE-2022-26373",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Non-transparent sharing of return predictor targets between contexts in some Intel(R) Processors may allow an authorized user to potentially enable information disclosure via local access.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-26373"
    },
    {
      "cve": "CVE-2022-32250",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "net/netfilter/nf_tables_api.c in the Linux kernel through 5.18.1 allows a local user (able to create user/net namespaces) to escalate privileges to root because an incorrect NFT_STATEFUL_EXPR check leads to a use-after-free.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-32250"
    },
    {
      "cve": "CVE-2022-32296",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Linux kernel before 5.17.9 allows TCP servers to identify clients by observing what source ports are used. This occurs because of use of Algorithm 4 (\"Double-Hash Port Selection Algorithm\") of RFC 6056.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-32296"
    },
    {
      "cve": "CVE-2022-34918",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 5.18.9. A type confusion bug in nft_set_elem_init (leading to a buffer overflow) could be used by a local attacker to escalate privileges, a different vulnerability than CVE-2022-32250. (The attacker can obtain root access, but must start with an unprivileged user namespace to obtain CAP_NET_ADMIN access.) This can be fixed in nft_setelem_parse_data in net/netfilter/nf_tables_api.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-34918"
    },
    {
      "cve": "CVE-2022-36123",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Linux kernel before 5.18.13 lacks a certain clear operation for the block starting symbol (.bss). This allows Xen PV guest OS users to cause a denial of service or gain privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-36123"
    },
    {
      "cve": "CVE-2022-36280",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds(OOB) memory access vulnerability was found in vmwgfx driver in drivers/gpu/vmxgfx/vmxgfx_kms.c in GPU component in the Linux kernel with device file \u0027/dev/dri/renderD128 (or Dxxx)\u0027. This flaw allows a local attacker with a user account on the system to gain privilege, causing a denial of service(DoS).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-36280"
    },
    {
      "cve": "CVE-2022-36879",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 5.18.14. xfrm_expand_policies in net/xfrm/xfrm_policy.c can cause a refcount to be dropped twice.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-36879"
    },
    {
      "cve": "CVE-2022-36946",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nfqnl_mangle in net/netfilter/nfnetlink_queue.c in the Linux kernel through 5.18.14 allows remote attackers to cause a denial of service (panic) because, in the case of an nf_queue verdict with a one-byte nfta_payload attribute, an skb_pull can encounter a negative skb-\u003elen.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-36946"
    },
    {
      "cve": "CVE-2022-39188",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in include/asm-generic/tlb.h in the Linux kernel before 5.19. Because of a race condition (unmap_mapping_range versus munmap), a device driver can free a page while it still has stale TLB entries. This only occurs in situations with VM_PFNMAP VMAs.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-39188"
    },
    {
      "cve": "CVE-2022-39190",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in net/netfilter/nf_tables_api.c in the Linux kernel before 5.19.6. A denial of service can occur upon binding to an already bound chain.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-39190"
    },
    {
      "cve": "CVE-2022-40307",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 5.19.8. drivers/firmware/efi/capsule-loader.c has a race condition with a resultant use-after-free.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-40307"
    },
    {
      "cve": "CVE-2022-40768",
      "cwe": {
        "id": "CWE-668",
        "name": "Exposure of Resource to Wrong Sphere"
      },
      "notes": [
        {
          "category": "summary",
          "text": "drivers/scsi/stex.c in the Linux kernel through 5.19.9 allows local users to obtain sensitive information from kernel memory because stex_queuecommand_lck lacks a memset for the PASSTHRU_CMD case.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-40768"
    },
    {
      "cve": "CVE-2022-41218",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In drivers/media/dvb-core/dmxdev.c in the Linux kernel through 5.19.10, there is a use-after-free caused by refcount races, affecting dvb_demux_open and dvb_dmxdev_release.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-41218"
    },
    {
      "cve": "CVE-2022-41222",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "mm/mremap.c in the Linux kernel before 5.13.3 has a use-after-free via a stale TLB because an rmap lock is not held during a PUD move.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-41222"
    },
    {
      "cve": "CVE-2022-41674",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel before 5.19.16. Attackers able to inject WLAN frames could cause a buffer overflow in the ieee80211_bss_info_update function in net/mac80211/scan.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-41674"
    },
    {
      "cve": "CVE-2022-41849",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "drivers/video/fbdev/smscufx.c in the Linux kernel through 5.19.12 has a race condition and resultant use-after-free if a physically proximate attacker removes a USB device while calling open(), aka a race condition between ufx_ops_open and ufx_usb_disconnect.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.2,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:P/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-41849"
    },
    {
      "cve": "CVE-2022-41850",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "roccat_report_event in drivers/hid/hid-roccat.c in the Linux kernel through 5.19.12 has a race condition and resultant use-after-free in certain situations where a report is received while copying a report-\u003evalue is in progress.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-41850"
    },
    {
      "cve": "CVE-2022-42328",
      "cwe": {
        "id": "CWE-667",
        "name": "Improper Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Guests can trigger deadlock in Linux netback driver [This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] The patch for XSA-392 introduced another issue which might result in a deadlock when trying to free the SKB of a packet dropped due to the XSA-392 handling (CVE-2022-42328). Additionally when dropping packages for other reasons the same deadlock could occur in case of netpoll being active for the interface the xen-netback driver is connected to (CVE-2022-42329).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42328"
    },
    {
      "cve": "CVE-2022-42329",
      "cwe": {
        "id": "CWE-667",
        "name": "Improper Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Guests can trigger deadlock in Linux netback drive. The patch for XSA-392 introduced another issue which might result in a deadlock when trying to free the SKB of a packet dropped due to the XSA-392 handling (CVE-2022-42328). Additionally when dropping packages for other reasons the same deadlock could occur in case of netpoll being active for the interface the xen-netback driver is connected to (CVE-2022-42329).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42329"
    },
    {
      "cve": "CVE-2022-42432",
      "cwe": {
        "id": "CWE-457",
        "name": "Use of Uninitialized Variable"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This vulnerability allows local attackers to disclose sensitive information on affected installations of the Linux Kernel 6.0-rc2. An attacker must first obtain the ability to execute high-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the nft_osf_eval function. The issue results from the lack of proper initialization of memory prior to accessing it. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of the kernel. Was ZDI-CAN-18540.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42432"
    },
    {
      "cve": "CVE-2022-42703",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "mm/rmap.c in the Linux kernel before 5.19.7 has a use-after-free related to leaf anon_vma double reuse.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42703"
    },
    {
      "cve": "CVE-2022-42719",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free in the mac80211 stack when parsing a multi-BSSID element in the Linux kernel 5.2 through 5.19.x before 5.19.16 could be used by attackers (able to inject WLAN frames) to crash the kernel and potentially execute code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42719"
    },
    {
      "cve": "CVE-2022-42720",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Various refcounting bugs in the multi-BSS handling in the mac80211 stack in the Linux kernel 5.1 through 5.19.x before 5.19.16 could be used by local attackers (able to inject WLAN frames) to trigger use-after-free conditions to potentially execute code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42720"
    },
    {
      "cve": "CVE-2022-42721",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A list management bug in BSS handling in the mac80211 stack in the Linux kernel 5.1 through 5.19.x before 5.19.16 could be used by local attackers (able to inject WLAN frames) to corrupt a linked list and, in turn, potentially execute code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42721"
    },
    {
      "cve": "CVE-2022-42722",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel 5.8 through 5.19.x before 5.19.16, local attackers able to inject WLAN frames into the mac80211 stack could cause a NULL pointer dereference denial-of-service attack against the beacon protection of P2P devices.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42722"
    },
    {
      "cve": "CVE-2022-42895",
      "cwe": {
        "id": "CWE-824",
        "name": "Access of Uninitialized Pointer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is an infoleak vulnerability in the Linux kernel\u0027s net/bluetooth/l2cap_core.c\u0027s l2cap_parse_conf_req function which can be used to leak kernel pointers remotely. We recommend upgrading past commit https://github.com/torvalds/linux/commit/b1a2cd50c0357f243b7435a732b4e62ba3157a2e",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42895"
    },
    {
      "cve": "CVE-2022-42896",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There are use-after-free vulnerabilities in the Linux kernel\u0027s net/bluetooth/l2cap_core.c\u0027s l2cap_connect and l2cap_le_connect_req functions which may allow code execution and leaking kernel memory (respectively) remotely via Bluetooth. A remote attacker could execute code leaking kernel memory via Bluetooth if within proximity of the victim. We recommend upgrading past commit https://github.com/torvalds/linux/commit/711f8c3fb3db61897080468586b970c87c61d9e4",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42896"
    },
    {
      "cve": "CVE-2022-43750",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "drivers/usb/mon/mon_bin.c in usbmon in the Linux kernel before 5.19.15 and 6.x before 6.0.1 allows a user-space client to corrupt the monitor\u0027s internal memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-43750"
    },
    {
      "cve": "CVE-2022-47518",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel before 6.0.11. Missing validation of the number of channels in drivers/net/wireless/microchip/wilc1000/cfg80211.c in the WILC1000 wireless driver can trigger a heap-based buffer overflow when copying the list of operating channels from Wi-Fi management frames.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-47518"
    },
    {
      "cve": "CVE-2022-47520",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel before 6.0.11. Missing offset validation in drivers/net/wireless/microchip/wilc1000/hif.c in the WILC1000 wireless driver can trigger an out-of-bounds read when parsing a Robust Security Network (RSN) information element from a Netlink packet.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-47520"
    },
    {
      "cve": "CVE-2022-47929",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel before 6.1.6, a NULL pointer dereference bug in the traffic control subsystem allows an unprivileged user to trigger a denial of service (system crash) via a crafted traffic control configuration that is set up with \"tc qdisc\" and \"tc class\" commands. This affects qdisc_graft in net/sched/sch_api.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-47929"
    },
    {
      "cve": "CVE-2022-47946",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel 5.10.x before 5.10.155. A use-after-free in io_sqpoll_wait_sq in fs/io_uring.c allows an attacker to crash the kernel, resulting in denial of service. finish_wait can be skipped. An attack can occur in some situations by forking a process and then quickly terminating it. NOTE: later kernel versions, such as the 5.15 longterm series, substantially changed the implementation of io_sqpoll_wait_sq.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-47946"
    },
    {
      "cve": "CVE-2023-0215",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may also be called directly by end user applications. The function receives a BIO from the caller, prepends a new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid, the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call BIO_pop() on the BIO. This internal function is in turn called by the public API functions PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1, SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL cms and smime command line applications are similarly affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-0215"
    },
    {
      "cve": "CVE-2023-0286",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName. X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these inputs, the other input must already contain an X.400 address as a CRL distribution point, which is uncommon. As such, this vulnerability is most likely to only affect applications which have implemented their own functionality for retrieving CRLs over a network.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-0286"
    },
    {
      "cve": "CVE-2023-0464",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security vulnerability has been identified in all supported versions of OpenSSL related to the verification of X.509 certificate chains that include policy constraints. Attackers may be able to exploit this vulnerability by creating a malicious certificate chain that triggers exponential use of computational resources, leading to a denial-of-service (DoS) attack on affected systems. Policy processing is disabled by default but can be enabled by passing the `-policy\u0027 argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()\u0027 function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-0464"
    },
    {
      "cve": "CVE-2023-0465",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Applications that use a non-default option when verifying certificates may be\nvulnerable to an attack from a malicious CA to circumvent certain checks.\n\nInvalid certificate policies in leaf certificates are silently ignored by\nOpenSSL and other certificate policy checks are skipped for that certificate.\nA malicious CA could use this to deliberately assert invalid certificate policies\nin order to circumvent policy checking on the certificate altogether.\n\nPolicy processing is disabled by default but can be enabled by passing\nthe `-policy\u0027 argument to the command line utilities or by calling the\n`X509_VERIFY_PARAM_set1_policies()\u0027 function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-0465"
    },
    {
      "cve": "CVE-2023-0466",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function X509_VERIFY_PARAM_add0_policy() is documented to\nimplicitly enable the certificate policy check when doing certificate\nverification. However the implementation of the function does not\nenable the check which allows certificates with invalid or incorrect\npolicies to pass the certificate verification.\n\nAs suddenly enabling the policy check could break existing deployments it was\ndecided to keep the existing behavior of the X509_VERIFY_PARAM_add0_policy()\nfunction.\n\nInstead the applications that require OpenSSL to perform certificate\npolicy check need to use X509_VERIFY_PARAM_set1_policies() or explicitly\nenable the policy check by calling X509_VERIFY_PARAM_set_flags() with\nthe X509_V_FLAG_POLICY_CHECK flag argument.\n\nCertificate policy checks are disabled by default in OpenSSL and are not\ncommonly used by applications.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-0466"
    },
    {
      "cve": "CVE-2023-0590",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in qdisc_graft in net/sched/sch_api.c in the Linux Kernel due to a race problem. This flaw leads to a denial of service issue. If patch ebda44da44f6 (\"net: sched: fix race condition in qdisc_graft()\") not applied yet, then kernel could be affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-0590"
    },
    {
      "cve": "CVE-2023-1077",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, pick_next_rt_entity() may return a type confused entry, not detected by the BUG_ON condition, as the confused entry will not be NULL, but list_head.The buggy error condition would lead to a type confused entry with the list head,which would then be used as a type confused sched_rt_entity,causing memory corruption.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-1077"
    },
    {
      "cve": "CVE-2023-1095",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In nf_tables_updtable, if nf_tables_table_enable returns an error, nft_trans_destroy is called to free the transaction object. nft_trans_destroy() calls list_del(), but the transaction was never placed on a list -- the list head is all zeroes, this results in a NULL pointer dereference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-1095"
    },
    {
      "cve": "CVE-2023-23454",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "cbq_classify in net/sched/sch_cbq.c in the Linux kernel through 6.1.4 allows attackers to cause a denial of service (slab-out-of-bounds read) because of type confusion (non-negative numbers can sometimes indicate a TC_ACT_SHOT condition rather than valid classification results).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-23454"
    },
    {
      "cve": "CVE-2023-23455",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "atm_tc_enqueue in net/sched/sch_atm.c in the Linux kernel through 6.1.4 allows attackers to cause a denial of service because of type confusion (non-negative numbers can sometimes indicate a TC_ACT_SHOT condition rather than valid classification results).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-23455"
    },
    {
      "cve": "CVE-2023-23559",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In rndis_query_oid in drivers/net/wireless/rndis_wlan.c in the Linux kernel through 6.1.5, there is an integer overflow in an addition.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-23559"
    },
    {
      "cve": "CVE-2023-26607",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel 6.0.8, there is an out-of-bounds read in ntfs_attr_find in fs/ntfs/attrib.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1"
          ]
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-26607"
    }
  ]
}

{
  "affected": [],
  "aliases": [
    "CVE-2022-41849"
  ],
  "database_specific": {
    "cwe_ids": [
      "CWE-362"
    ],
    "github_reviewed": false,
    "github_reviewed_at": null,
    "nvd_published_at": "2022-09-30T06:15:00Z",
    "severity": "MODERATE"
  },
  "details": "drivers/video/fbdev/smscufx.c in the Linux kernel through 5.19.12 has a race condition and resultant use-after-free if a physically proximate attacker removes a USB device while calling open(), aka a race condition between ufx_ops_open and ufx_usb_disconnect.",
  "id": "GHSA-mfp9-chmw-53h7",
  "modified": "2024-03-25T03:31:43Z",
  "published": "2022-10-01T00:00:25Z",
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2022-41849"
    },
    {
      "type": "WEB",
      "url": "https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=5610bcfe8693c02e2e4c8b31427f1bdbdecc839c"
    },
    {
      "type": "WEB",
      "url": "https://lists.debian.org/debian-lts-announce/2022/12/msg00031.html"
    },
    {
      "type": "WEB",
      "url": "https://lists.debian.org/debian-lts-announce/2022/12/msg00034.html"
    },
    {
      "type": "WEB",
      "url": "https://lore.kernel.org/all/20220925133243.GA383897%40ubuntu/T"
    },
    {
      "type": "WEB",
      "url": "https://lore.kernel.org/all/20220925133243.GA383897@ubuntu/T"
    }
  ],
  "schema_version": "1.4.0",
  "severity": [
    {
      "score": "CVSS:3.1/AV:P/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
      "type": "CVSS_V3"
    }
  ]
}

{
  "document": {
    "aggregate_severity": {
      "text": "kritisch"
    },
    "category": "csaf_base",
    "csaf_version": "2.0",
    "distribution": {
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "de-DE",
    "notes": [
      {
        "category": "legal_disclaimer",
        "text": "Das BSI ist als Anbieter f\u00fcr die eigenen, zur Nutzung bereitgestellten Inhalte nach den allgemeinen Gesetzen verantwortlich. Nutzerinnen und Nutzer sind jedoch daf\u00fcr verantwortlich, die Verwendung und/oder die Umsetzung der mit den Inhalten bereitgestellten Informationen sorgf\u00e4ltig im Einzelfall zu pr\u00fcfen."
      },
      {
        "category": "description",
        "text": "Die SIMATIC S7 ist eine Serie von SPS (Speicherprogrammierbare Steuerungen) f\u00fcr Automatisierungsanwendungen.",
        "title": "Produktbeschreibung"
      },
      {
        "category": "summary",
        "text": "Ein Angreifer aus dem angrenzenden Netzwerk oder ein entfernter, anonymer, authentisierter, physischer oder lokaler Angreifer kann mehrere Schwachstellen in Siemens SIMATIC S7 ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren.",
        "title": "Angriff"
      },
      {
        "category": "general",
        "text": "- BIOS/Firmware",
        "title": "Betroffene Betriebssysteme"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "csaf-provider@cert-bund.de",
      "name": "Bundesamt f\u00fcr Sicherheit in der Informationstechnik",
      "namespace": "https://www.bsi.bund.de"
    },
    "references": [
      {
        "category": "self",
        "summary": "WID-SEC-W-2023-1432 - CSAF Version",
        "url": "https://wid.cert-bund.de/.well-known/csaf/white/2023/wid-sec-w-2023-1432.json"
      },
      {
        "category": "self",
        "summary": "WID-SEC-2023-1432 - Portal Version",
        "url": "https://wid.cert-bund.de/portal/wid/securityadvisory?name=WID-SEC-2023-1432"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-6187-1 vom 2023-06-22",
        "url": "https://ubuntu.com/security/notices/USN-6187-1"
      },
      {
        "category": "external",
        "summary": "Siemens Security Advisory vom 2023-06-12",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-831302.html"
      },
      {
        "category": "external",
        "summary": "Siemens Security Advisory vom 2023-06-12",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-794697.html"
      }
    ],
    "source_lang": "en-US",
    "title": "Siemens SIMATIC S7: Mehrere Schwachstellen",
    "tracking": {
      "current_release_date": "2023-06-22T22:00:00.000+00:00",
      "generator": {
        "date": "2024-02-15T17:30:48.504+00:00",
        "engine": {
          "name": "BSI-WID",
          "version": "1.3.0"
        }
      },
      "id": "WID-SEC-W-2023-1432",
      "initial_release_date": "2023-06-12T22:00:00.000+00:00",
      "revision_history": [
        {
          "date": "2023-06-12T22:00:00.000+00:00",
          "number": "1",
          "summary": "Initiale Fassung"
        },
        {
          "date": "2023-06-22T22:00:00.000+00:00",
          "number": "2",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        }
      ],
      "status": "final",
      "version": "2"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "category": "product_name",
            "name": "Siemens SIMATIC S7 1500 TM MFP",
            "product": {
              "name": "Siemens SIMATIC S7 1500 TM MFP",
              "product_id": "T028071",
              "product_identification_helper": {
                "cpe": "cpe:/h:siemens:simatic_s7:1500_tm_mfp"
              }
            }
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      },
      {
        "branches": [
          {
            "category": "product_name",
            "name": "Ubuntu Linux",
            "product": {
              "name": "Ubuntu Linux",
              "product_id": "T000126",
              "product_identification_helper": {
                "cpe": "cpe:/o:canonical:ubuntu_linux:-"
              }
            }
          }
        ],
        "category": "vendor",
        "name": "Ubuntu"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2023-26607",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2023-26607"
    },
    {
      "cve": "CVE-2023-23559",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2023-23559"
    },
    {
      "cve": "CVE-2023-23455",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2023-23455"
    },
    {
      "cve": "CVE-2023-23454",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2023-23454"
    },
    {
      "cve": "CVE-2023-1095",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2023-1095"
    },
    {
      "cve": "CVE-2023-1077",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2023-1077"
    },
    {
      "cve": "CVE-2023-1073",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2023-1073"
    },
    {
      "cve": "CVE-2023-0590",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2023-0590"
    },
    {
      "cve": "CVE-2023-0466",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2023-0466"
    },
    {
      "cve": "CVE-2023-0465",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2023-0465"
    },
    {
      "cve": "CVE-2023-0464",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2023-0464"
    },
    {
      "cve": "CVE-2023-0394",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2023-0394"
    },
    {
      "cve": "CVE-2023-0286",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2023-0286"
    },
    {
      "cve": "CVE-2023-0215",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2023-0215"
    },
    {
      "cve": "CVE-2023-0179",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2023-0179"
    },
    {
      "cve": "CVE-2022-47946",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-47946"
    },
    {
      "cve": "CVE-2022-47929",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-47929"
    },
    {
      "cve": "CVE-2022-47520",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-47520"
    },
    {
      "cve": "CVE-2022-47518",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-47518"
    },
    {
      "cve": "CVE-2022-4662",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-4662"
    },
    {
      "cve": "CVE-2022-4450",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-4450"
    },
    {
      "cve": "CVE-2022-4378",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-4378"
    },
    {
      "cve": "CVE-2022-43750",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-43750"
    },
    {
      "cve": "CVE-2022-4304",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-4304"
    },
    {
      "cve": "CVE-2022-42896",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-42896"
    },
    {
      "cve": "CVE-2022-42895",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-42895"
    },
    {
      "cve": "CVE-2022-42722",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-42722"
    },
    {
      "cve": "CVE-2022-42721",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-42721"
    },
    {
      "cve": "CVE-2022-42720",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-42720"
    },
    {
      "cve": "CVE-2022-42719",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-42719"
    },
    {
      "cve": "CVE-2022-42703",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-42703"
    },
    {
      "cve": "CVE-2022-42432",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-42432"
    },
    {
      "cve": "CVE-2022-42329",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-42329"
    },
    {
      "cve": "CVE-2022-42328",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-42328"
    },
    {
      "cve": "CVE-2022-41850",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-41850"
    },
    {
      "cve": "CVE-2022-41849",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-41849"
    },
    {
      "cve": "CVE-2022-41674",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-41674"
    },
    {
      "cve": "CVE-2022-4139",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-4139"
    },
    {
      "cve": "CVE-2022-4129",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-4129"
    },
    {
      "cve": "CVE-2022-41222",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-41222"
    },
    {
      "cve": "CVE-2022-41218",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-41218"
    },
    {
      "cve": "CVE-2022-4095",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-4095"
    },
    {
      "cve": "CVE-2022-40768",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-40768"
    },
    {
      "cve": "CVE-2022-40307",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-40307"
    },
    {
      "cve": "CVE-2022-39190",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-39190"
    },
    {
      "cve": "CVE-2022-39188",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-39188"
    },
    {
      "cve": "CVE-2022-36946",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-36946"
    },
    {
      "cve": "CVE-2022-36879",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-36879"
    },
    {
      "cve": "CVE-2022-3649",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3649"
    },
    {
      "cve": "CVE-2022-3646",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3646"
    },
    {
      "cve": "CVE-2022-3635",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3635"
    },
    {
      "cve": "CVE-2022-3633",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3633"
    },
    {
      "cve": "CVE-2022-3629",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3629"
    },
    {
      "cve": "CVE-2022-36280",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-36280"
    },
    {
      "cve": "CVE-2022-3628",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3628"
    },
    {
      "cve": "CVE-2022-3625",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3625"
    },
    {
      "cve": "CVE-2022-3621",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3621"
    },
    {
      "cve": "CVE-2022-36123",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-36123"
    },
    {
      "cve": "CVE-2022-3606",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3606"
    },
    {
      "cve": "CVE-2022-3594",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3594"
    },
    {
      "cve": "CVE-2022-3586",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3586"
    },
    {
      "cve": "CVE-2022-3565",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3565"
    },
    {
      "cve": "CVE-2022-3564",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3564"
    },
    {
      "cve": "CVE-2022-3545",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3545"
    },
    {
      "cve": "CVE-2022-3534",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3534"
    },
    {
      "cve": "CVE-2022-3524",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3524"
    },
    {
      "cve": "CVE-2022-3521",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3521"
    },
    {
      "cve": "CVE-2022-34918",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-34918"
    },
    {
      "cve": "CVE-2022-3435",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3435"
    },
    {
      "cve": "CVE-2022-3303",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3303"
    },
    {
      "cve": "CVE-2022-32296",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-32296"
    },
    {
      "cve": "CVE-2022-32250",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-32250"
    },
    {
      "cve": "CVE-2022-3169",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3169"
    },
    {
      "cve": "CVE-2022-3115",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3115"
    },
    {
      "cve": "CVE-2022-3104",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3104"
    },
    {
      "cve": "CVE-2022-3028",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3028"
    },
    {
      "cve": "CVE-2022-30065",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-30065"
    },
    {
      "cve": "CVE-2022-2978",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-2978"
    },
    {
      "cve": "CVE-2022-2959",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-2959"
    },
    {
      "cve": "CVE-2022-2905",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-2905"
    },
    {
      "cve": "CVE-2022-28391",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-28391"
    },
    {
      "cve": "CVE-2022-2663",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-2663"
    },
    {
      "cve": "CVE-2022-26373",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-26373"
    },
    {
      "cve": "CVE-2022-2602",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-2602"
    },
    {
      "cve": "CVE-2022-2588",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-2588"
    },
    {
      "cve": "CVE-2022-2586",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-2586"
    },
    {
      "cve": "CVE-2022-2585",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-2585"
    },
    {
      "cve": "CVE-2022-2503",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-2503"
    },
    {
      "cve": "CVE-2022-2327",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-2327"
    },
    {
      "cve": "CVE-2022-23219",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-23219"
    },
    {
      "cve": "CVE-2022-23218",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-23218"
    },
    {
      "cve": "CVE-2022-2274",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-2274"
    },
    {
      "cve": "CVE-2022-2153",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-2153"
    },
    {
      "cve": "CVE-2022-21505",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-21505"
    },
    {
      "cve": "CVE-2022-21233",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-21233"
    },
    {
      "cve": "CVE-2022-21166",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-21166"
    },
    {
      "cve": "CVE-2022-21125",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-21125"
    },
    {
      "cve": "CVE-2022-21123",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-21123"
    },
    {
      "cve": "CVE-2022-2097",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-2097"
    },
    {
      "cve": "CVE-2022-2078",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-2078"
    },
    {
      "cve": "CVE-2022-2068",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-2068"
    },
    {
      "cve": "CVE-2022-20572",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-20572"
    },
    {
      "cve": "CVE-2022-20566",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-20566"
    },
    {
      "cve": "CVE-2022-20422",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-20422"
    },
    {
      "cve": "CVE-2022-20421",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-20421"
    },
    {
      "cve": "CVE-2022-1882",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-1882"
    },
    {
      "cve": "CVE-2022-1852",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-1852"
    },
    {
      "cve": "CVE-2022-1679",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-1679"
    },
    {
      "cve": "CVE-2022-1473",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-1473"
    },
    {
      "cve": "CVE-2022-1462",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-1462"
    },
    {
      "cve": "CVE-2022-1434",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-1434"
    },
    {
      "cve": "CVE-2022-1343",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-1343"
    },
    {
      "cve": "CVE-2022-1292",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-1292"
    },
    {
      "cve": "CVE-2022-1184",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-1184"
    },
    {
      "cve": "CVE-2022-1012",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-1012"
    },
    {
      "cve": "CVE-2022-0171",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-0171"
    },
    {
      "cve": "CVE-2021-42386",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-42386"
    },
    {
      "cve": "CVE-2021-42385",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-42385"
    },
    {
      "cve": "CVE-2021-42384",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-42384"
    },
    {
      "cve": "CVE-2021-42383",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-42383"
    },
    {
      "cve": "CVE-2021-42382",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-42382"
    },
    {
      "cve": "CVE-2021-42381",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-42381"
    },
    {
      "cve": "CVE-2021-42380",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-42380"
    },
    {
      "cve": "CVE-2021-42379",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-42379"
    },
    {
      "cve": "CVE-2021-42378",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-42378"
    },
    {
      "cve": "CVE-2021-42377",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-42377"
    },
    {
      "cve": "CVE-2021-42376",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-42376"
    },
    {
      "cve": "CVE-2021-42375",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-42375"
    },
    {
      "cve": "CVE-2021-42374",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-42374"
    },
    {
      "cve": "CVE-2021-42373",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-42373"
    },
    {
      "cve": "CVE-2021-4037",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-4037"
    },
    {
      "cve": "CVE-2021-3999",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-3999"
    },
    {
      "cve": "CVE-2021-3998",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-3998"
    },
    {
      "cve": "CVE-2021-38604",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-38604"
    },
    {
      "cve": "CVE-2021-3759",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-3759"
    },
    {
      "cve": "CVE-2021-35942",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-35942"
    },
    {
      "cve": "CVE-2021-33655",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-33655"
    },
    {
      "cve": "CVE-2021-33574",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-33574"
    },
    {
      "cve": "CVE-2021-3326",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-3326"
    },
    {
      "cve": "CVE-2021-28831",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-28831"
    },
    {
      "cve": "CVE-2021-27645",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-27645"
    },
    {
      "cve": "CVE-2021-20269",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-20269"
    },
    {
      "cve": "CVE-2020-29562",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2020-29562"
    },
    {
      "cve": "CVE-2020-27618",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2020-27618"
    },
    {
      "cve": "CVE-2020-1752",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2020-1752"
    },
    {
      "cve": "CVE-2020-10029",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2020-10029"
    },
    {
      "cve": "CVE-2019-25013",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2019-25013"
    },
    {
      "cve": "CVE-2018-13405",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2018-13405"
    },
    {
      "cve": "CVE-2016-10228",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2016-10228"
    }
  ]
}

{
  "document": {
    "aggregate_severity": {
      "text": "kritisch"
    },
    "category": "csaf_base",
    "csaf_version": "2.0",
    "distribution": {
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "de-DE",
    "notes": [
      {
        "category": "legal_disclaimer",
        "text": "Das BSI ist als Anbieter f\u00fcr die eigenen, zur Nutzung bereitgestellten Inhalte nach den allgemeinen Gesetzen verantwortlich. Nutzerinnen und Nutzer sind jedoch daf\u00fcr verantwortlich, die Verwendung und/oder die Umsetzung der mit den Inhalten bereitgestellten Informationen sorgf\u00e4ltig im Einzelfall zu pr\u00fcfen."
      },
      {
        "category": "description",
        "text": "Die SIMATIC S7 ist eine Serie von SPS (Speicherprogrammierbare Steuerungen) f\u00fcr Automatisierungsanwendungen.",
        "title": "Produktbeschreibung"
      },
      {
        "category": "summary",
        "text": "Ein Angreifer aus dem angrenzenden Netzwerk oder ein entfernter, anonymer, authentisierter, physischer oder lokaler Angreifer kann mehrere Schwachstellen in Siemens SIMATIC S7 ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren.",
        "title": "Angriff"
      },
      {
        "category": "general",
        "text": "- BIOS/Firmware",
        "title": "Betroffene Betriebssysteme"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "csaf-provider@cert-bund.de",
      "name": "Bundesamt f\u00fcr Sicherheit in der Informationstechnik",
      "namespace": "https://www.bsi.bund.de"
    },
    "references": [
      {
        "category": "self",
        "summary": "WID-SEC-W-2023-1432 - CSAF Version",
        "url": "https://wid.cert-bund.de/.well-known/csaf/white/2023/wid-sec-w-2023-1432.json"
      },
      {
        "category": "self",
        "summary": "WID-SEC-2023-1432 - Portal Version",
        "url": "https://wid.cert-bund.de/portal/wid/securityadvisory?name=WID-SEC-2023-1432"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-6187-1 vom 2023-06-22",
        "url": "https://ubuntu.com/security/notices/USN-6187-1"
      },
      {
        "category": "external",
        "summary": "Siemens Security Advisory vom 2023-06-12",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-831302.html"
      },
      {
        "category": "external",
        "summary": "Siemens Security Advisory vom 2023-06-12",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-794697.html"
      }
    ],
    "source_lang": "en-US",
    "title": "Siemens SIMATIC S7: Mehrere Schwachstellen",
    "tracking": {
      "current_release_date": "2023-06-22T22:00:00.000+00:00",
      "generator": {
        "date": "2024-02-15T17:30:48.504+00:00",
        "engine": {
          "name": "BSI-WID",
          "version": "1.3.0"
        }
      },
      "id": "WID-SEC-W-2023-1432",
      "initial_release_date": "2023-06-12T22:00:00.000+00:00",
      "revision_history": [
        {
          "date": "2023-06-12T22:00:00.000+00:00",
          "number": "1",
          "summary": "Initiale Fassung"
        },
        {
          "date": "2023-06-22T22:00:00.000+00:00",
          "number": "2",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        }
      ],
      "status": "final",
      "version": "2"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "category": "product_name",
            "name": "Siemens SIMATIC S7 1500 TM MFP",
            "product": {
              "name": "Siemens SIMATIC S7 1500 TM MFP",
              "product_id": "T028071",
              "product_identification_helper": {
                "cpe": "cpe:/h:siemens:simatic_s7:1500_tm_mfp"
              }
            }
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      },
      {
        "branches": [
          {
            "category": "product_name",
            "name": "Ubuntu Linux",
            "product": {
              "name": "Ubuntu Linux",
              "product_id": "T000126",
              "product_identification_helper": {
                "cpe": "cpe:/o:canonical:ubuntu_linux:-"
              }
            }
          }
        ],
        "category": "vendor",
        "name": "Ubuntu"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2023-26607",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2023-26607"
    },
    {
      "cve": "CVE-2023-23559",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2023-23559"
    },
    {
      "cve": "CVE-2023-23455",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2023-23455"
    },
    {
      "cve": "CVE-2023-23454",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2023-23454"
    },
    {
      "cve": "CVE-2023-1095",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2023-1095"
    },
    {
      "cve": "CVE-2023-1077",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2023-1077"
    },
    {
      "cve": "CVE-2023-1073",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2023-1073"
    },
    {
      "cve": "CVE-2023-0590",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2023-0590"
    },
    {
      "cve": "CVE-2023-0466",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2023-0466"
    },
    {
      "cve": "CVE-2023-0465",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2023-0465"
    },
    {
      "cve": "CVE-2023-0464",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2023-0464"
    },
    {
      "cve": "CVE-2023-0394",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2023-0394"
    },
    {
      "cve": "CVE-2023-0286",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2023-0286"
    },
    {
      "cve": "CVE-2023-0215",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2023-0215"
    },
    {
      "cve": "CVE-2023-0179",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2023-0179"
    },
    {
      "cve": "CVE-2022-47946",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-47946"
    },
    {
      "cve": "CVE-2022-47929",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-47929"
    },
    {
      "cve": "CVE-2022-47520",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-47520"
    },
    {
      "cve": "CVE-2022-47518",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-47518"
    },
    {
      "cve": "CVE-2022-4662",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-4662"
    },
    {
      "cve": "CVE-2022-4450",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-4450"
    },
    {
      "cve": "CVE-2022-4378",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-4378"
    },
    {
      "cve": "CVE-2022-43750",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-43750"
    },
    {
      "cve": "CVE-2022-4304",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-4304"
    },
    {
      "cve": "CVE-2022-42896",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-42896"
    },
    {
      "cve": "CVE-2022-42895",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-42895"
    },
    {
      "cve": "CVE-2022-42722",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-42722"
    },
    {
      "cve": "CVE-2022-42721",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-42721"
    },
    {
      "cve": "CVE-2022-42720",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-42720"
    },
    {
      "cve": "CVE-2022-42719",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-42719"
    },
    {
      "cve": "CVE-2022-42703",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-42703"
    },
    {
      "cve": "CVE-2022-42432",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-42432"
    },
    {
      "cve": "CVE-2022-42329",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-42329"
    },
    {
      "cve": "CVE-2022-42328",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-42328"
    },
    {
      "cve": "CVE-2022-41850",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-41850"
    },
    {
      "cve": "CVE-2022-41849",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-41849"
    },
    {
      "cve": "CVE-2022-41674",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-41674"
    },
    {
      "cve": "CVE-2022-4139",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-4139"
    },
    {
      "cve": "CVE-2022-4129",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-4129"
    },
    {
      "cve": "CVE-2022-41222",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-41222"
    },
    {
      "cve": "CVE-2022-41218",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-41218"
    },
    {
      "cve": "CVE-2022-4095",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-4095"
    },
    {
      "cve": "CVE-2022-40768",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-40768"
    },
    {
      "cve": "CVE-2022-40307",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-40307"
    },
    {
      "cve": "CVE-2022-39190",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-39190"
    },
    {
      "cve": "CVE-2022-39188",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-39188"
    },
    {
      "cve": "CVE-2022-36946",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-36946"
    },
    {
      "cve": "CVE-2022-36879",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-36879"
    },
    {
      "cve": "CVE-2022-3649",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3649"
    },
    {
      "cve": "CVE-2022-3646",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3646"
    },
    {
      "cve": "CVE-2022-3635",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3635"
    },
    {
      "cve": "CVE-2022-3633",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3633"
    },
    {
      "cve": "CVE-2022-3629",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3629"
    },
    {
      "cve": "CVE-2022-36280",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-36280"
    },
    {
      "cve": "CVE-2022-3628",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3628"
    },
    {
      "cve": "CVE-2022-3625",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3625"
    },
    {
      "cve": "CVE-2022-3621",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3621"
    },
    {
      "cve": "CVE-2022-36123",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-36123"
    },
    {
      "cve": "CVE-2022-3606",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3606"
    },
    {
      "cve": "CVE-2022-3594",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3594"
    },
    {
      "cve": "CVE-2022-3586",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3586"
    },
    {
      "cve": "CVE-2022-3565",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3565"
    },
    {
      "cve": "CVE-2022-3564",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3564"
    },
    {
      "cve": "CVE-2022-3545",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3545"
    },
    {
      "cve": "CVE-2022-3534",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3534"
    },
    {
      "cve": "CVE-2022-3524",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3524"
    },
    {
      "cve": "CVE-2022-3521",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3521"
    },
    {
      "cve": "CVE-2022-34918",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-34918"
    },
    {
      "cve": "CVE-2022-3435",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3435"
    },
    {
      "cve": "CVE-2022-3303",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3303"
    },
    {
      "cve": "CVE-2022-32296",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-32296"
    },
    {
      "cve": "CVE-2022-32250",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-32250"
    },
    {
      "cve": "CVE-2022-3169",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3169"
    },
    {
      "cve": "CVE-2022-3115",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3115"
    },
    {
      "cve": "CVE-2022-3104",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3104"
    },
    {
      "cve": "CVE-2022-3028",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-3028"
    },
    {
      "cve": "CVE-2022-30065",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-30065"
    },
    {
      "cve": "CVE-2022-2978",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-2978"
    },
    {
      "cve": "CVE-2022-2959",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-2959"
    },
    {
      "cve": "CVE-2022-2905",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-2905"
    },
    {
      "cve": "CVE-2022-28391",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-28391"
    },
    {
      "cve": "CVE-2022-2663",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-2663"
    },
    {
      "cve": "CVE-2022-26373",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-26373"
    },
    {
      "cve": "CVE-2022-2602",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-2602"
    },
    {
      "cve": "CVE-2022-2588",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-2588"
    },
    {
      "cve": "CVE-2022-2586",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-2586"
    },
    {
      "cve": "CVE-2022-2585",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-2585"
    },
    {
      "cve": "CVE-2022-2503",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-2503"
    },
    {
      "cve": "CVE-2022-2327",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-2327"
    },
    {
      "cve": "CVE-2022-23219",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-23219"
    },
    {
      "cve": "CVE-2022-23218",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-23218"
    },
    {
      "cve": "CVE-2022-2274",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-2274"
    },
    {
      "cve": "CVE-2022-2153",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-2153"
    },
    {
      "cve": "CVE-2022-21505",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-21505"
    },
    {
      "cve": "CVE-2022-21233",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-21233"
    },
    {
      "cve": "CVE-2022-21166",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-21166"
    },
    {
      "cve": "CVE-2022-21125",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-21125"
    },
    {
      "cve": "CVE-2022-21123",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-21123"
    },
    {
      "cve": "CVE-2022-2097",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-2097"
    },
    {
      "cve": "CVE-2022-2078",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-2078"
    },
    {
      "cve": "CVE-2022-2068",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-2068"
    },
    {
      "cve": "CVE-2022-20572",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-20572"
    },
    {
      "cve": "CVE-2022-20566",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-20566"
    },
    {
      "cve": "CVE-2022-20422",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-20422"
    },
    {
      "cve": "CVE-2022-20421",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-20421"
    },
    {
      "cve": "CVE-2022-1882",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-1882"
    },
    {
      "cve": "CVE-2022-1852",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-1852"
    },
    {
      "cve": "CVE-2022-1679",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-1679"
    },
    {
      "cve": "CVE-2022-1473",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-1473"
    },
    {
      "cve": "CVE-2022-1462",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-1462"
    },
    {
      "cve": "CVE-2022-1434",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-1434"
    },
    {
      "cve": "CVE-2022-1343",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-1343"
    },
    {
      "cve": "CVE-2022-1292",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-1292"
    },
    {
      "cve": "CVE-2022-1184",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-1184"
    },
    {
      "cve": "CVE-2022-1012",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-1012"
    },
    {
      "cve": "CVE-2022-0171",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2022-0171"
    },
    {
      "cve": "CVE-2021-42386",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-42386"
    },
    {
      "cve": "CVE-2021-42385",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-42385"
    },
    {
      "cve": "CVE-2021-42384",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-42384"
    },
    {
      "cve": "CVE-2021-42383",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-42383"
    },
    {
      "cve": "CVE-2021-42382",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-42382"
    },
    {
      "cve": "CVE-2021-42381",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-42381"
    },
    {
      "cve": "CVE-2021-42380",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-42380"
    },
    {
      "cve": "CVE-2021-42379",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-42379"
    },
    {
      "cve": "CVE-2021-42378",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-42378"
    },
    {
      "cve": "CVE-2021-42377",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-42377"
    },
    {
      "cve": "CVE-2021-42376",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-42376"
    },
    {
      "cve": "CVE-2021-42375",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-42375"
    },
    {
      "cve": "CVE-2021-42374",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-42374"
    },
    {
      "cve": "CVE-2021-42373",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-42373"
    },
    {
      "cve": "CVE-2021-4037",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-4037"
    },
    {
      "cve": "CVE-2021-3999",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-3999"
    },
    {
      "cve": "CVE-2021-3998",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-3998"
    },
    {
      "cve": "CVE-2021-38604",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-38604"
    },
    {
      "cve": "CVE-2021-3759",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-3759"
    },
    {
      "cve": "CVE-2021-35942",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-35942"
    },
    {
      "cve": "CVE-2021-33655",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-33655"
    },
    {
      "cve": "CVE-2021-33574",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-33574"
    },
    {
      "cve": "CVE-2021-3326",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-3326"
    },
    {
      "cve": "CVE-2021-28831",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-28831"
    },
    {
      "cve": "CVE-2021-27645",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-27645"
    },
    {
      "cve": "CVE-2021-20269",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2021-20269"
    },
    {
      "cve": "CVE-2020-29562",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2020-29562"
    },
    {
      "cve": "CVE-2020-27618",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2020-27618"
    },
    {
      "cve": "CVE-2020-1752",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2020-1752"
    },
    {
      "cve": "CVE-2020-10029",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2020-10029"
    },
    {
      "cve": "CVE-2019-25013",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2019-25013"
    },
    {
      "cve": "CVE-2018-13405",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2018-13405"
    },
    {
      "cve": "CVE-2016-10228",
      "notes": [
        {
          "category": "description",
          "text": "In Siemens SIMATIC S7 existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem aufgrund von unzul\u00e4ssigen Einschr\u00e4nkungen, Puffer\u00fcberl\u00e4ufen, fehlenden Freigaben und use-after-free-Problemen. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, Sicherheitsma\u00dfnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuf\u00fchren, seine Privilegien zu erweitern und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Privilegien."
        }
      ],
      "product_status": {
        "known_affected": [
          "T000126",
          "T028071"
        ]
      },
      "release_date": "2023-06-12T22:00:00Z",
      "title": "CVE-2016-10228"
    }
  ]
}

{
  "document": {
    "aggregate_severity": {
      "text": "mittel"
    },
    "category": "csaf_base",
    "csaf_version": "2.0",
    "distribution": {
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "de-DE",
    "notes": [
      {
        "category": "legal_disclaimer",
        "text": "Das BSI ist als Anbieter f\u00fcr die eigenen, zur Nutzung bereitgestellten Inhalte nach den allgemeinen Gesetzen verantwortlich. Nutzerinnen und Nutzer sind jedoch daf\u00fcr verantwortlich, die Verwendung und/oder die Umsetzung der mit den Inhalten bereitgestellten Informationen sorgf\u00e4ltig im Einzelfall zu pr\u00fcfen."
      },
      {
        "category": "description",
        "text": "Der Kernel stellt den Kern des Linux Betriebssystems dar.",
        "title": "Produktbeschreibung"
      },
      {
        "category": "summary",
        "text": "Ein lokaler Angreifer kann mehrere Schwachstellen im Linux Kernel ausnutzen, um einen nicht n\u00e4her spezifizierten Angriff durchzuf\u00fchren.",
        "title": "Angriff"
      },
      {
        "category": "general",
        "text": "- Linux",
        "title": "Betroffene Betriebssysteme"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "csaf-provider@cert-bund.de",
      "name": "Bundesamt f\u00fcr Sicherheit in der Informationstechnik",
      "namespace": "https://www.bsi.bund.de"
    },
    "references": [
      {
        "category": "self",
        "summary": "WID-SEC-W-2022-1583 - CSAF Version",
        "url": "https://wid.cert-bund.de/.well-known/csaf/white/2022/wid-sec-w-2022-1583.json"
      },
      {
        "category": "self",
        "summary": "WID-SEC-2022-1583 - Portal Version",
        "url": "https://wid.cert-bund.de/portal/wid/securityadvisory?name=WID-SEC-2022-1583"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-6235-1 vom 2023-07-18",
        "url": "https://ubuntu.com/security/notices/USN-6235-1"
      },
      {
        "category": "external",
        "summary": "Oracle Linux Security Advisory ELSA-2023-2458 vom 2023-06-28",
        "url": "https://oss.oracle.com/pipermail/el-errata/2023-June/014226.html"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-6043-1 vom 2023-04-26",
        "url": "https://ubuntu.com/security/notices/USN-6043-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-6024-1 vom 2023-04-25",
        "url": "https://ubuntu.com/security/notices/USN-6040-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-6031-1 vom 2023-04-19",
        "url": "https://ubuntu.com/security/notices/USN-6031-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-6013-1 vom 2023-04-12",
        "url": "https://ubuntu.com/security/notices/USN-6014-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-6007-1 vom 2023-04-12",
        "url": "https://ubuntu.com/security/notices/USN-6007-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-6001-1 vom 2023-04-06",
        "url": "https://ubuntu.com/security/notices/USN-6001-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5976-1 vom 2023-03-28",
        "url": "https://ubuntu.com/security/notices/USN-5976-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5975-1 vom 2023-03-28",
        "url": "https://ubuntu.com/security/notices/USN-5975-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5924-1 vom 2023-03-06",
        "url": "https://ubuntu.com/security/notices/USN-5924-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5918-1 vom 2023-03-03",
        "url": "https://ubuntu.com/security/notices/USN-5918-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5909-1 vom 2023-03-02",
        "url": "https://ubuntu.com/security/notices/USN-5909-1"
      },
      {
        "category": "external",
        "summary": "NIST Vulnerability Database vom 2022-09-29",
        "url": "https://nvd.nist.gov/vuln/detail/CVE-2022-41848"
      },
      {
        "category": "external",
        "summary": "NIST Vulnerability Database vom 2022-09-29",
        "url": "https://nvd.nist.gov/vuln/detail/CVE-2022-41849"
      },
      {
        "category": "external",
        "summary": "NIST Vulnerability Database vom 2022-09-29",
        "url": "https://nvd.nist.gov/vuln/detail/CVE-2022-41850"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:3585-1 vom 2022-10-14",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-October/012536.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:3587-1 vom 2022-10-14",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-October/012539.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:3584-1 vom 2022-10-14",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-October/012540.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:3609-1 vom 2022-10-18",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-October/012557.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:3693-1 vom 2022-10-22",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-October/012617.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:3688-1 vom 2022-10-21",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-October/012601.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:3704-1 vom 2022-10-24",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-October/012636.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:3775-1 vom 2022-10-26",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-October/012711.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:3809-1 vom 2022-10-31",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-October/012771.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:3810-1 vom 2022-10-31",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-October/012772.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:3844-1 vom 2022-11-02",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-November/012797.html"
      },
      {
        "category": "external",
        "summary": "Amazon Linux Security Advisory ALAS2KERNEL-5.10-2022-023 vom 2022-12-08",
        "url": "https://alas.aws.amazon.com/AL2/ALASKERNEL-5.10-2022-023.html"
      },
      {
        "category": "external",
        "summary": "Amazon Linux Security Advisory ALAS-2022-1645 vom 2022-12-10",
        "url": "https://alas.aws.amazon.com/ALAS-2022-1645.html"
      },
      {
        "category": "external",
        "summary": "Amazon Linux Security Advisory ALAS2KERNEL-5.4-2022-039 vom 2022-12-14",
        "url": "https://alas.aws.amazon.com/AL2/ALASKERNEL-5.4-2022-039.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:4505-1 vom 2022-12-16",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-December/013250.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:4503-1 vom 2022-12-16",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-December/013251.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:4504-1 vom 2022-12-16",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-December/013252.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:4574-1 vom 2022-12-19",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-December/013279.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:4566-1 vom 2022-12-19",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-December/013273.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:4561-1 vom 2022-12-19",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-December/013272.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:4573-1 vom 2022-12-19",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-December/013280.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:4589-1 vom 2022-12-20",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-December/013294.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:4585-1 vom 2022-12-20",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-December/013296.html"
      },
      {
        "category": "external",
        "summary": "Debian Security Advisory DLA-3244 vom 2022-12-22",
        "url": "https://lists.debian.org/debian-lts-announce/2022/12/msg00031.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:4616-1 vom 2022-12-23",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-December/013339.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:4613-1 vom 2022-12-23",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-December/013340.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:4617-1 vom 2022-12-23",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-December/013342.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:4614-1 vom 2022-12-23",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-December/013337.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:4611-1 vom 2022-12-23",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-December/013341.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:4615-1 vom 2022-12-23",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-December/013338.html"
      },
      {
        "category": "external",
        "summary": "Debian Security Advisory DLA-3245 vom 2022-12-23",
        "url": "https://lists.debian.org/debian-lts-announce/2022/12/msg00034.html"
      },
      {
        "category": "external",
        "summary": "ORACLE OVMSA-2023-0001 vom 2023-01-04",
        "url": "https://oss.oracle.com/pipermail/oraclevm-errata/2023-January/001067.html"
      },
      {
        "category": "external",
        "summary": "Oracle Linux Security Advisory ELSA-2022-10108 vom 2023-01-04",
        "url": "http://linux.oracle.com/errata/ELSA-2022-10108.html"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5793-1 vom 2023-01-07",
        "url": "https://ubuntu.com/security/notices/USN-5793-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5793-2 vom 2023-01-09",
        "url": "https://ubuntu.com/security/notices/USN-5793-2"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5793-4 vom 2023-01-11",
        "url": "https://ubuntu.com/security/notices/USN-5793-4"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5793-3 vom 2023-01-10",
        "url": "https://ubuntu.com/security/notices/USN-5793-3"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5862-1 vom 2023-02-10",
        "url": "https://ubuntu.com/security/notices/USN-5862-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5861-1 vom 2023-02-10",
        "url": "https://ubuntu.com/security/notices/USN-5861-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5859-1 vom 2023-02-10",
        "url": "https://ubuntu.com/security/notices/USN-5860-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5854-1 vom 2023-02-09",
        "url": "https://ubuntu.com/security/notices/USN-5854-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5853-1 vom 2023-02-09",
        "url": "https://ubuntu.com/security/notices/USN-5853-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5851-1 vom 2023-02-09",
        "url": "https://ubuntu.com/security/notices/USN-5851-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5877-1 vom 2023-02-16",
        "url": "https://ubuntu.com/security/notices/USN-5877-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5876-1 vom 2023-02-16",
        "url": "https://ubuntu.com/security/notices/USN-5876-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5875-1 vom 2023-02-16",
        "url": "https://ubuntu.com/security/notices/USN-5875-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5874-1 vom 2023-02-16",
        "url": "https://ubuntu.com/security/notices/USN-5874-1"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2023:0416-1 vom 2023-02-15",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2023-February/013765.html"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5883-1 vom 2023-02-22",
        "url": "https://ubuntu.com/security/notices/USN-5883-1"
      }
    ],
    "source_lang": "en-US",
    "title": "Linux Kernel: Mehrere Schwachstellen erm\u00f6glichen nicht spezifizierten Angriff",
    "tracking": {
      "current_release_date": "2023-07-18T22:00:00.000+00:00",
      "generator": {
        "date": "2024-02-15T16:59:32.007+00:00",
        "engine": {
          "name": "BSI-WID",
          "version": "1.3.0"
        }
      },
      "id": "WID-SEC-W-2022-1583",
      "initial_release_date": "2022-09-29T22:00:00.000+00:00",
      "revision_history": [
        {
          "date": "2022-09-29T22:00:00.000+00:00",
          "number": "1",
          "summary": "Initiale Fassung"
        },
        {
          "date": "2022-10-16T22:00:00.000+00:00",
          "number": "2",
          "summary": "Neue Updates von SUSE aufgenommen"
        },
        {
          "date": "2022-10-18T22:00:00.000+00:00",
          "number": "3",
          "summary": "Neue Updates von SUSE aufgenommen"
        },
        {
          "date": "2022-10-23T22:00:00.000+00:00",
          "number": "4",
          "summary": "Neue Updates von SUSE aufgenommen"
        },
        {
          "date": "2022-10-24T22:00:00.000+00:00",
          "number": "5",
          "summary": "Neue Updates von SUSE aufgenommen"
        },
        {
          "date": "2022-10-26T22:00:00.000+00:00",
          "number": "6",
          "summary": "Neue Updates von SUSE aufgenommen"
        },
        {
          "date": "2022-10-31T23:00:00.000+00:00",
          "number": "7",
          "summary": "Neue Updates von SUSE aufgenommen"
        },
        {
          "date": "2022-11-01T23:00:00.000+00:00",
          "number": "8",
          "summary": "Neue Updates von SUSE aufgenommen"
        },
        {
          "date": "2022-12-08T23:00:00.000+00:00",
          "number": "9",
          "summary": "Neue Updates von Amazon aufgenommen"
        },
        {
          "date": "2022-12-11T23:00:00.000+00:00",
          "number": "10",
          "summary": "Neue Updates von Amazon aufgenommen"
        },
        {
          "date": "2022-12-14T23:00:00.000+00:00",
          "number": "11",
          "summary": "Neue Updates von Amazon aufgenommen"
        },
        {
          "date": "2022-12-18T23:00:00.000+00:00",
          "number": "12",
          "summary": "Neue Updates von SUSE aufgenommen"
        },
        {
          "date": "2022-12-19T23:00:00.000+00:00",
          "number": "13",
          "summary": "Neue Updates von SUSE aufgenommen"
        },
        {
          "date": "2022-12-20T23:00:00.000+00:00",
          "number": "14",
          "summary": "Neue Updates von SUSE aufgenommen"
        },
        {
          "date": "2022-12-22T23:00:00.000+00:00",
          "number": "15",
          "summary": "Neue Updates von Debian aufgenommen"
        },
        {
          "date": "2022-12-26T23:00:00.000+00:00",
          "number": "16",
          "summary": "Neue Updates von SUSE und Debian aufgenommen"
        },
        {
          "date": "2023-01-04T23:00:00.000+00:00",
          "number": "17",
          "summary": "Neue Updates von ORACLE und Oracle Linux aufgenommen"
        },
        {
          "date": "2023-01-08T23:00:00.000+00:00",
          "number": "18",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        },
        {
          "date": "2023-01-09T23:00:00.000+00:00",
          "number": "19",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        },
        {
          "date": "2023-01-10T23:00:00.000+00:00",
          "number": "20",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        },
        {
          "date": "2023-02-09T23:00:00.000+00:00",
          "number": "21",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        },
        {
          "date": "2023-02-15T23:00:00.000+00:00",
          "number": "22",
          "summary": "Neue Updates von Ubuntu und SUSE aufgenommen"
        },
        {
          "date": "2023-02-22T23:00:00.000+00:00",
          "number": "23",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        },
        {
          "date": "2023-03-02T23:00:00.000+00:00",
          "number": "24",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        },
        {
          "date": "2023-03-05T23:00:00.000+00:00",
          "number": "25",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        },
        {
          "date": "2023-03-06T23:00:00.000+00:00",
          "number": "26",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        },
        {
          "date": "2023-03-27T22:00:00.000+00:00",
          "number": "27",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        },
        {
          "date": "2023-04-05T22:00:00.000+00:00",
          "number": "28",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        },
        {
          "date": "2023-04-11T22:00:00.000+00:00",
          "number": "29",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        },
        {
          "date": "2023-04-12T22:00:00.000+00:00",
          "number": "30",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        },
        {
          "date": "2023-04-19T22:00:00.000+00:00",
          "number": "31",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        },
        {
          "date": "2023-04-24T22:00:00.000+00:00",
          "number": "32",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        },
        {
          "date": "2023-04-26T22:00:00.000+00:00",
          "number": "33",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        },
        {
          "date": "2023-06-28T22:00:00.000+00:00",
          "number": "34",
          "summary": "Neue Updates von Oracle Linux aufgenommen"
        },
        {
          "date": "2023-07-18T22:00:00.000+00:00",
          "number": "35",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        }
      ],
      "status": "final",
      "version": "35"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "category": "product_name",
            "name": "Amazon Linux 2",
            "product": {
              "name": "Amazon Linux 2",
              "product_id": "398363",
              "product_identification_helper": {
                "cpe": "cpe:/o:amazon:linux_2:-"
              }
            }
          }
        ],
        "category": "vendor",
        "name": "Amazon"
      },
      {
        "branches": [
          {
            "category": "product_name",
            "name": "Debian Linux",
            "product": {
              "name": "Debian Linux",
              "product_id": "2951",
              "product_identification_helper": {
                "cpe": "cpe:/o:debian:debian_linux:-"
              }
            }
          }
        ],
        "category": "vendor",
        "name": "Debian"
      },
      {
        "branches": [
          {
            "category": "product_name",
            "name": "Open Source Linux Kernel \u003c= 5.19.12",
            "product": {
              "name": "Open Source Linux Kernel \u003c= 5.19.12",
              "product_id": "T024760",
              "product_identification_helper": {
                "cpe": "cpe:/o:linux:linux_kernel:5.19.12"
              }
            }
          }
        ],
        "category": "vendor",
        "name": "Open Source"
      },
      {
        "branches": [
          {
            "category": "product_name",
            "name": "Oracle Linux",
            "product": {
              "name": "Oracle Linux",
              "product_id": "T004914",
              "product_identification_helper": {
                "cpe": "cpe:/o:oracle:linux:-"
              }
            }
          },
          {
            "category": "product_name",
            "name": "Oracle VM",
            "product": {
              "name": "Oracle VM",
              "product_id": "T011119",
              "product_identification_helper": {
                "cpe": "cpe:/a:oracle:vm:-"
              }
            }
          }
        ],
        "category": "vendor",
        "name": "Oracle"
      },
      {
        "branches": [
          {
            "category": "product_name",
            "name": "SUSE Linux",
            "product": {
              "name": "SUSE Linux",
              "product_id": "T002207",
              "product_identification_helper": {
                "cpe": "cpe:/o:suse:suse_linux:-"
              }
            }
          }
        ],
        "category": "vendor",
        "name": "SUSE"
      },
      {
        "branches": [
          {
            "category": "product_name",
            "name": "Ubuntu Linux",
            "product": {
              "name": "Ubuntu Linux",
              "product_id": "T000126",
              "product_identification_helper": {
                "cpe": "cpe:/o:canonical:ubuntu_linux:-"
              }
            }
          }
        ],
        "category": "vendor",
        "name": "Ubuntu"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2022-41848",
      "notes": [
        {
          "category": "description",
          "text": "Es existieren mehrere Schwachstellen im Linux Kernel. In den Treibern \"drivers/hid/hid-roccat.c\", \"drivers/video/fbdev/smscufx.c\" und \"drivers/char/pcmcia/synclink_cs.c\" kommt es unter bestimmten Umst\u00e4nden zu einer Race Kondition und daraus folgend zu einem Use after Free Fehler. Ein Angreifer mit physischem Zugriff kann diese Schwachstellen ausnutzen, um nicht n\u00e4her spezifizierte Auswirkungen zu verursachen."
        }
      ],
      "product_status": {
        "known_affected": [
          "T011119",
          "2951",
          "T002207",
          "T000126",
          "398363",
          "T004914"
        ],
        "last_affected": [
          "T024760"
        ]
      },
      "release_date": "2022-09-29T22:00:00Z",
      "title": "CVE-2022-41848"
    },
    {
      "cve": "CVE-2022-41849",
      "notes": [
        {
          "category": "description",
          "text": "Es existieren mehrere Schwachstellen im Linux Kernel. In den Treibern \"drivers/hid/hid-roccat.c\", \"drivers/video/fbdev/smscufx.c\" und \"drivers/char/pcmcia/synclink_cs.c\" kommt es unter bestimmten Umst\u00e4nden zu einer Race Kondition und daraus folgend zu einem Use after Free Fehler. Ein Angreifer mit physischem Zugriff kann diese Schwachstellen ausnutzen, um nicht n\u00e4her spezifizierte Auswirkungen zu verursachen."
        }
      ],
      "product_status": {
        "known_affected": [
          "T011119",
          "2951",
          "T002207",
          "T000126",
          "398363",
          "T004914"
        ],
        "last_affected": [
          "T024760"
        ]
      },
      "release_date": "2022-09-29T22:00:00Z",
      "title": "CVE-2022-41849"
    },
    {
      "cve": "CVE-2022-41850",
      "notes": [
        {
          "category": "description",
          "text": "Es existieren mehrere Schwachstellen im Linux Kernel. In den Treibern \"drivers/hid/hid-roccat.c\", \"drivers/video/fbdev/smscufx.c\" und \"drivers/char/pcmcia/synclink_cs.c\" kommt es unter bestimmten Umst\u00e4nden zu einer Race Kondition und daraus folgend zu einem Use after Free Fehler. Ein Angreifer mit physischem Zugriff kann diese Schwachstellen ausnutzen, um nicht n\u00e4her spezifizierte Auswirkungen zu verursachen."
        }
      ],
      "product_status": {
        "known_affected": [
          "T011119",
          "2951",
          "T002207",
          "T000126",
          "398363",
          "T004914"
        ],
        "last_affected": [
          "T024760"
        ]
      },
      "release_date": "2022-09-29T22:00:00Z",
      "title": "CVE-2022-41850"
    }
  ]
}

{
  "document": {
    "aggregate_severity": {
      "text": "mittel"
    },
    "category": "csaf_base",
    "csaf_version": "2.0",
    "distribution": {
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "de-DE",
    "notes": [
      {
        "category": "legal_disclaimer",
        "text": "Das BSI ist als Anbieter f\u00fcr die eigenen, zur Nutzung bereitgestellten Inhalte nach den allgemeinen Gesetzen verantwortlich. Nutzerinnen und Nutzer sind jedoch daf\u00fcr verantwortlich, die Verwendung und/oder die Umsetzung der mit den Inhalten bereitgestellten Informationen sorgf\u00e4ltig im Einzelfall zu pr\u00fcfen."
      },
      {
        "category": "description",
        "text": "Der Kernel stellt den Kern des Linux Betriebssystems dar.",
        "title": "Produktbeschreibung"
      },
      {
        "category": "summary",
        "text": "Ein lokaler Angreifer kann mehrere Schwachstellen im Linux Kernel ausnutzen, um einen nicht n\u00e4her spezifizierten Angriff durchzuf\u00fchren.",
        "title": "Angriff"
      },
      {
        "category": "general",
        "text": "- Linux",
        "title": "Betroffene Betriebssysteme"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "csaf-provider@cert-bund.de",
      "name": "Bundesamt f\u00fcr Sicherheit in der Informationstechnik",
      "namespace": "https://www.bsi.bund.de"
    },
    "references": [
      {
        "category": "self",
        "summary": "WID-SEC-W-2022-1583 - CSAF Version",
        "url": "https://wid.cert-bund.de/.well-known/csaf/white/2022/wid-sec-w-2022-1583.json"
      },
      {
        "category": "self",
        "summary": "WID-SEC-2022-1583 - Portal Version",
        "url": "https://wid.cert-bund.de/portal/wid/securityadvisory?name=WID-SEC-2022-1583"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-6235-1 vom 2023-07-18",
        "url": "https://ubuntu.com/security/notices/USN-6235-1"
      },
      {
        "category": "external",
        "summary": "Oracle Linux Security Advisory ELSA-2023-2458 vom 2023-06-28",
        "url": "https://oss.oracle.com/pipermail/el-errata/2023-June/014226.html"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-6043-1 vom 2023-04-26",
        "url": "https://ubuntu.com/security/notices/USN-6043-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-6024-1 vom 2023-04-25",
        "url": "https://ubuntu.com/security/notices/USN-6040-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-6031-1 vom 2023-04-19",
        "url": "https://ubuntu.com/security/notices/USN-6031-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-6013-1 vom 2023-04-12",
        "url": "https://ubuntu.com/security/notices/USN-6014-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-6007-1 vom 2023-04-12",
        "url": "https://ubuntu.com/security/notices/USN-6007-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-6001-1 vom 2023-04-06",
        "url": "https://ubuntu.com/security/notices/USN-6001-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5976-1 vom 2023-03-28",
        "url": "https://ubuntu.com/security/notices/USN-5976-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5975-1 vom 2023-03-28",
        "url": "https://ubuntu.com/security/notices/USN-5975-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5924-1 vom 2023-03-06",
        "url": "https://ubuntu.com/security/notices/USN-5924-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5918-1 vom 2023-03-03",
        "url": "https://ubuntu.com/security/notices/USN-5918-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5909-1 vom 2023-03-02",
        "url": "https://ubuntu.com/security/notices/USN-5909-1"
      },
      {
        "category": "external",
        "summary": "NIST Vulnerability Database vom 2022-09-29",
        "url": "https://nvd.nist.gov/vuln/detail/CVE-2022-41848"
      },
      {
        "category": "external",
        "summary": "NIST Vulnerability Database vom 2022-09-29",
        "url": "https://nvd.nist.gov/vuln/detail/CVE-2022-41849"
      },
      {
        "category": "external",
        "summary": "NIST Vulnerability Database vom 2022-09-29",
        "url": "https://nvd.nist.gov/vuln/detail/CVE-2022-41850"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:3585-1 vom 2022-10-14",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-October/012536.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:3587-1 vom 2022-10-14",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-October/012539.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:3584-1 vom 2022-10-14",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-October/012540.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:3609-1 vom 2022-10-18",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-October/012557.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:3693-1 vom 2022-10-22",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-October/012617.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:3688-1 vom 2022-10-21",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-October/012601.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:3704-1 vom 2022-10-24",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-October/012636.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:3775-1 vom 2022-10-26",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-October/012711.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:3809-1 vom 2022-10-31",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-October/012771.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:3810-1 vom 2022-10-31",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-October/012772.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:3844-1 vom 2022-11-02",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-November/012797.html"
      },
      {
        "category": "external",
        "summary": "Amazon Linux Security Advisory ALAS2KERNEL-5.10-2022-023 vom 2022-12-08",
        "url": "https://alas.aws.amazon.com/AL2/ALASKERNEL-5.10-2022-023.html"
      },
      {
        "category": "external",
        "summary": "Amazon Linux Security Advisory ALAS-2022-1645 vom 2022-12-10",
        "url": "https://alas.aws.amazon.com/ALAS-2022-1645.html"
      },
      {
        "category": "external",
        "summary": "Amazon Linux Security Advisory ALAS2KERNEL-5.4-2022-039 vom 2022-12-14",
        "url": "https://alas.aws.amazon.com/AL2/ALASKERNEL-5.4-2022-039.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:4505-1 vom 2022-12-16",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-December/013250.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:4503-1 vom 2022-12-16",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-December/013251.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:4504-1 vom 2022-12-16",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-December/013252.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:4574-1 vom 2022-12-19",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-December/013279.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:4566-1 vom 2022-12-19",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-December/013273.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:4561-1 vom 2022-12-19",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-December/013272.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:4573-1 vom 2022-12-19",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-December/013280.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:4589-1 vom 2022-12-20",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-December/013294.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:4585-1 vom 2022-12-20",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-December/013296.html"
      },
      {
        "category": "external",
        "summary": "Debian Security Advisory DLA-3244 vom 2022-12-22",
        "url": "https://lists.debian.org/debian-lts-announce/2022/12/msg00031.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:4616-1 vom 2022-12-23",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-December/013339.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:4613-1 vom 2022-12-23",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-December/013340.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:4617-1 vom 2022-12-23",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-December/013342.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:4614-1 vom 2022-12-23",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-December/013337.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:4611-1 vom 2022-12-23",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-December/013341.html"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2022:4615-1 vom 2022-12-23",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2022-December/013338.html"
      },
      {
        "category": "external",
        "summary": "Debian Security Advisory DLA-3245 vom 2022-12-23",
        "url": "https://lists.debian.org/debian-lts-announce/2022/12/msg00034.html"
      },
      {
        "category": "external",
        "summary": "ORACLE OVMSA-2023-0001 vom 2023-01-04",
        "url": "https://oss.oracle.com/pipermail/oraclevm-errata/2023-January/001067.html"
      },
      {
        "category": "external",
        "summary": "Oracle Linux Security Advisory ELSA-2022-10108 vom 2023-01-04",
        "url": "http://linux.oracle.com/errata/ELSA-2022-10108.html"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5793-1 vom 2023-01-07",
        "url": "https://ubuntu.com/security/notices/USN-5793-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5793-2 vom 2023-01-09",
        "url": "https://ubuntu.com/security/notices/USN-5793-2"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5793-4 vom 2023-01-11",
        "url": "https://ubuntu.com/security/notices/USN-5793-4"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5793-3 vom 2023-01-10",
        "url": "https://ubuntu.com/security/notices/USN-5793-3"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5862-1 vom 2023-02-10",
        "url": "https://ubuntu.com/security/notices/USN-5862-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5861-1 vom 2023-02-10",
        "url": "https://ubuntu.com/security/notices/USN-5861-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5859-1 vom 2023-02-10",
        "url": "https://ubuntu.com/security/notices/USN-5860-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5854-1 vom 2023-02-09",
        "url": "https://ubuntu.com/security/notices/USN-5854-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5853-1 vom 2023-02-09",
        "url": "https://ubuntu.com/security/notices/USN-5853-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5851-1 vom 2023-02-09",
        "url": "https://ubuntu.com/security/notices/USN-5851-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5877-1 vom 2023-02-16",
        "url": "https://ubuntu.com/security/notices/USN-5877-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5876-1 vom 2023-02-16",
        "url": "https://ubuntu.com/security/notices/USN-5876-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5875-1 vom 2023-02-16",
        "url": "https://ubuntu.com/security/notices/USN-5875-1"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5874-1 vom 2023-02-16",
        "url": "https://ubuntu.com/security/notices/USN-5874-1"
      },
      {
        "category": "external",
        "summary": "SUSE Security Update SUSE-SU-2023:0416-1 vom 2023-02-15",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2023-February/013765.html"
      },
      {
        "category": "external",
        "summary": "Ubuntu Security Notice USN-5883-1 vom 2023-02-22",
        "url": "https://ubuntu.com/security/notices/USN-5883-1"
      }
    ],
    "source_lang": "en-US",
    "title": "Linux Kernel: Mehrere Schwachstellen erm\u00f6glichen nicht spezifizierten Angriff",
    "tracking": {
      "current_release_date": "2023-07-18T22:00:00.000+00:00",
      "generator": {
        "date": "2024-02-15T16:59:32.007+00:00",
        "engine": {
          "name": "BSI-WID",
          "version": "1.3.0"
        }
      },
      "id": "WID-SEC-W-2022-1583",
      "initial_release_date": "2022-09-29T22:00:00.000+00:00",
      "revision_history": [
        {
          "date": "2022-09-29T22:00:00.000+00:00",
          "number": "1",
          "summary": "Initiale Fassung"
        },
        {
          "date": "2022-10-16T22:00:00.000+00:00",
          "number": "2",
          "summary": "Neue Updates von SUSE aufgenommen"
        },
        {
          "date": "2022-10-18T22:00:00.000+00:00",
          "number": "3",
          "summary": "Neue Updates von SUSE aufgenommen"
        },
        {
          "date": "2022-10-23T22:00:00.000+00:00",
          "number": "4",
          "summary": "Neue Updates von SUSE aufgenommen"
        },
        {
          "date": "2022-10-24T22:00:00.000+00:00",
          "number": "5",
          "summary": "Neue Updates von SUSE aufgenommen"
        },
        {
          "date": "2022-10-26T22:00:00.000+00:00",
          "number": "6",
          "summary": "Neue Updates von SUSE aufgenommen"
        },
        {
          "date": "2022-10-31T23:00:00.000+00:00",
          "number": "7",
          "summary": "Neue Updates von SUSE aufgenommen"
        },
        {
          "date": "2022-11-01T23:00:00.000+00:00",
          "number": "8",
          "summary": "Neue Updates von SUSE aufgenommen"
        },
        {
          "date": "2022-12-08T23:00:00.000+00:00",
          "number": "9",
          "summary": "Neue Updates von Amazon aufgenommen"
        },
        {
          "date": "2022-12-11T23:00:00.000+00:00",
          "number": "10",
          "summary": "Neue Updates von Amazon aufgenommen"
        },
        {
          "date": "2022-12-14T23:00:00.000+00:00",
          "number": "11",
          "summary": "Neue Updates von Amazon aufgenommen"
        },
        {
          "date": "2022-12-18T23:00:00.000+00:00",
          "number": "12",
          "summary": "Neue Updates von SUSE aufgenommen"
        },
        {
          "date": "2022-12-19T23:00:00.000+00:00",
          "number": "13",
          "summary": "Neue Updates von SUSE aufgenommen"
        },
        {
          "date": "2022-12-20T23:00:00.000+00:00",
          "number": "14",
          "summary": "Neue Updates von SUSE aufgenommen"
        },
        {
          "date": "2022-12-22T23:00:00.000+00:00",
          "number": "15",
          "summary": "Neue Updates von Debian aufgenommen"
        },
        {
          "date": "2022-12-26T23:00:00.000+00:00",
          "number": "16",
          "summary": "Neue Updates von SUSE und Debian aufgenommen"
        },
        {
          "date": "2023-01-04T23:00:00.000+00:00",
          "number": "17",
          "summary": "Neue Updates von ORACLE und Oracle Linux aufgenommen"
        },
        {
          "date": "2023-01-08T23:00:00.000+00:00",
          "number": "18",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        },
        {
          "date": "2023-01-09T23:00:00.000+00:00",
          "number": "19",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        },
        {
          "date": "2023-01-10T23:00:00.000+00:00",
          "number": "20",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        },
        {
          "date": "2023-02-09T23:00:00.000+00:00",
          "number": "21",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        },
        {
          "date": "2023-02-15T23:00:00.000+00:00",
          "number": "22",
          "summary": "Neue Updates von Ubuntu und SUSE aufgenommen"
        },
        {
          "date": "2023-02-22T23:00:00.000+00:00",
          "number": "23",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        },
        {
          "date": "2023-03-02T23:00:00.000+00:00",
          "number": "24",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        },
        {
          "date": "2023-03-05T23:00:00.000+00:00",
          "number": "25",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        },
        {
          "date": "2023-03-06T23:00:00.000+00:00",
          "number": "26",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        },
        {
          "date": "2023-03-27T22:00:00.000+00:00",
          "number": "27",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        },
        {
          "date": "2023-04-05T22:00:00.000+00:00",
          "number": "28",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        },
        {
          "date": "2023-04-11T22:00:00.000+00:00",
          "number": "29",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        },
        {
          "date": "2023-04-12T22:00:00.000+00:00",
          "number": "30",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        },
        {
          "date": "2023-04-19T22:00:00.000+00:00",
          "number": "31",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        },
        {
          "date": "2023-04-24T22:00:00.000+00:00",
          "number": "32",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        },
        {
          "date": "2023-04-26T22:00:00.000+00:00",
          "number": "33",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        },
        {
          "date": "2023-06-28T22:00:00.000+00:00",
          "number": "34",
          "summary": "Neue Updates von Oracle Linux aufgenommen"
        },
        {
          "date": "2023-07-18T22:00:00.000+00:00",
          "number": "35",
          "summary": "Neue Updates von Ubuntu aufgenommen"
        }
      ],
      "status": "final",
      "version": "35"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "category": "product_name",
            "name": "Amazon Linux 2",
            "product": {
              "name": "Amazon Linux 2",
              "product_id": "398363",
              "product_identification_helper": {
                "cpe": "cpe:/o:amazon:linux_2:-"
              }
            }
          }
        ],
        "category": "vendor",
        "name": "Amazon"
      },
      {
        "branches": [
          {
            "category": "product_name",
            "name": "Debian Linux",
            "product": {
              "name": "Debian Linux",
              "product_id": "2951",
              "product_identification_helper": {
                "cpe": "cpe:/o:debian:debian_linux:-"
              }
            }
          }
        ],
        "category": "vendor",
        "name": "Debian"
      },
      {
        "branches": [
          {
            "category": "product_name",
            "name": "Open Source Linux Kernel \u003c= 5.19.12",
            "product": {
              "name": "Open Source Linux Kernel \u003c= 5.19.12",
              "product_id": "T024760",
              "product_identification_helper": {
                "cpe": "cpe:/o:linux:linux_kernel:5.19.12"
              }
            }
          }
        ],
        "category": "vendor",
        "name": "Open Source"
      },
      {
        "branches": [
          {
            "category": "product_name",
            "name": "Oracle Linux",
            "product": {
              "name": "Oracle Linux",
              "product_id": "T004914",
              "product_identification_helper": {
                "cpe": "cpe:/o:oracle:linux:-"
              }
            }
          },
          {
            "category": "product_name",
            "name": "Oracle VM",
            "product": {
              "name": "Oracle VM",
              "product_id": "T011119",
              "product_identification_helper": {
                "cpe": "cpe:/a:oracle:vm:-"
              }
            }
          }
        ],
        "category": "vendor",
        "name": "Oracle"
      },
      {
        "branches": [
          {
            "category": "product_name",
            "name": "SUSE Linux",
            "product": {
              "name": "SUSE Linux",
              "product_id": "T002207",
              "product_identification_helper": {
                "cpe": "cpe:/o:suse:suse_linux:-"
              }
            }
          }
        ],
        "category": "vendor",
        "name": "SUSE"
      },
      {
        "branches": [
          {
            "category": "product_name",
            "name": "Ubuntu Linux",
            "product": {
              "name": "Ubuntu Linux",
              "product_id": "T000126",
              "product_identification_helper": {
                "cpe": "cpe:/o:canonical:ubuntu_linux:-"
              }
            }
          }
        ],
        "category": "vendor",
        "name": "Ubuntu"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2022-41848",
      "notes": [
        {
          "category": "description",
          "text": "Es existieren mehrere Schwachstellen im Linux Kernel. In den Treibern \"drivers/hid/hid-roccat.c\", \"drivers/video/fbdev/smscufx.c\" und \"drivers/char/pcmcia/synclink_cs.c\" kommt es unter bestimmten Umst\u00e4nden zu einer Race Kondition und daraus folgend zu einem Use after Free Fehler. Ein Angreifer mit physischem Zugriff kann diese Schwachstellen ausnutzen, um nicht n\u00e4her spezifizierte Auswirkungen zu verursachen."
        }
      ],
      "product_status": {
        "known_affected": [
          "T011119",
          "2951",
          "T002207",
          "T000126",
          "398363",
          "T004914"
        ],
        "last_affected": [
          "T024760"
        ]
      },
      "release_date": "2022-09-29T22:00:00Z",
      "title": "CVE-2022-41848"
    },
    {
      "cve": "CVE-2022-41849",
      "notes": [
        {
          "category": "description",
          "text": "Es existieren mehrere Schwachstellen im Linux Kernel. In den Treibern \"drivers/hid/hid-roccat.c\", \"drivers/video/fbdev/smscufx.c\" und \"drivers/char/pcmcia/synclink_cs.c\" kommt es unter bestimmten Umst\u00e4nden zu einer Race Kondition und daraus folgend zu einem Use after Free Fehler. Ein Angreifer mit physischem Zugriff kann diese Schwachstellen ausnutzen, um nicht n\u00e4her spezifizierte Auswirkungen zu verursachen."
        }
      ],
      "product_status": {
        "known_affected": [
          "T011119",
          "2951",
          "T002207",
          "T000126",
          "398363",
          "T004914"
        ],
        "last_affected": [
          "T024760"
        ]
      },
      "release_date": "2022-09-29T22:00:00Z",
      "title": "CVE-2022-41849"
    },
    {
      "cve": "CVE-2022-41850",
      "notes": [
        {
          "category": "description",
          "text": "Es existieren mehrere Schwachstellen im Linux Kernel. In den Treibern \"drivers/hid/hid-roccat.c\", \"drivers/video/fbdev/smscufx.c\" und \"drivers/char/pcmcia/synclink_cs.c\" kommt es unter bestimmten Umst\u00e4nden zu einer Race Kondition und daraus folgend zu einem Use after Free Fehler. Ein Angreifer mit physischem Zugriff kann diese Schwachstellen ausnutzen, um nicht n\u00e4her spezifizierte Auswirkungen zu verursachen."
        }
      ],
      "product_status": {
        "known_affected": [
          "T011119",
          "2951",
          "T002207",
          "T000126",
          "398363",
          "T004914"
        ],
        "last_affected": [
          "T024760"
        ]
      },
      "release_date": "2022-09-29T22:00:00Z",
      "title": "CVE-2022-41850"
    }
  ]
}

{
  "GSD": {
    "alias": "CVE-2022-41849",
    "id": "GSD-2022-41849",
    "references": [
      "https://alas.aws.amazon.com/cve/html/CVE-2022-41849.html",
      "https://advisories.mageia.org/CVE-2022-41849.html",
      "https://www.suse.com/security/cve/CVE-2022-41849.html",
      "https://security.archlinux.org/CVE-2022-41849",
      "https://ubuntu.com/security/CVE-2022-41849"
    ]
  },
  "gsd": {
    "metadata": {
      "exploitCode": "unknown",
      "remediation": "unknown",
      "reportConfidence": "confirmed",
      "type": "vulnerability"
    },
    "osvSchema": {
      "aliases": [
        "CVE-2022-41849"
      ],
      "details": "drivers/video/fbdev/smscufx.c in the Linux kernel through 5.19.12 has a race condition and resultant use-after-free if a physically proximate attacker removes a USB device while calling open(), aka a race condition between ufx_ops_open and ufx_usb_disconnect.",
      "id": "GSD-2022-41849",
      "modified": "2023-12-13T01:19:32.847185Z",
      "schema_version": "1.4.0"
    }
  },
  "namespaces": {
    "cve.org": {
      "CVE_data_meta": {
        "ASSIGNER": "cve@mitre.org",
        "ID": "CVE-2022-41849",
        "STATE": "PUBLIC"
      },
      "affects": {
        "vendor": {
          "vendor_data": [
            {
              "product": {
                "product_data": [
                  {
                    "product_name": "n/a",
                    "version": {
                      "version_data": [
                        {
                          "version_value": "n/a"
                        }
                      ]
                    }
                  }
                ]
              },
              "vendor_name": "n/a"
            }
          ]
        }
      },
      "data_format": "MITRE",
      "data_type": "CVE",
      "data_version": "4.0",
      "description": {
        "description_data": [
          {
            "lang": "eng",
            "value": "drivers/video/fbdev/smscufx.c in the Linux kernel through 5.19.12 has a race condition and resultant use-after-free if a physically proximate attacker removes a USB device while calling open(), aka a race condition between ufx_ops_open and ufx_usb_disconnect."
          }
        ]
      },
      "problemtype": {
        "problemtype_data": [
          {
            "description": [
              {
                "lang": "eng",
                "value": "n/a"
              }
            ]
          }
        ]
      },
      "references": {
        "reference_data": [
          {
            "name": "https://lore.kernel.org/all/20220925133243.GA383897@ubuntu/T/",
            "refsource": "MISC",
            "url": "https://lore.kernel.org/all/20220925133243.GA383897@ubuntu/T/"
          },
          {
            "name": "[debian-lts-announce] 20221222 [SECURITY] [DLA 3244-1] linux-5.10 security update",
            "refsource": "MLIST",
            "url": "https://lists.debian.org/debian-lts-announce/2022/12/msg00031.html"
          },
          {
            "name": "[debian-lts-announce] 20221223 [SECURITY] [DLA 3245-1] linux security update",
            "refsource": "MLIST",
            "url": "https://lists.debian.org/debian-lts-announce/2022/12/msg00034.html"
          },
          {
            "name": "https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=5610bcfe8693c02e2e4c8b31427f1bdbdecc839c",
            "refsource": "MISC",
            "url": "https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=5610bcfe8693c02e2e4c8b31427f1bdbdecc839c"
          }
        ]
      }
    },
    "nvd.nist.gov": {
      "cve": {
        "configurations": [
          {
            "nodes": [
              {
                "cpeMatch": [
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                    "matchCriteriaId": "23BF74ED-65BB-46BD-8C28-143062FC6C49",
                    "versionEndIncluding": "5.19.12",
                    "vulnerable": true
                  }
                ],
                "negate": false,
                "operator": "OR"
              }
            ]
          },
          {
            "nodes": [
              {
                "cpeMatch": [
                  {
                    "criteria": "cpe:2.3:o:debian:debian_linux:10.0:*:*:*:*:*:*:*",
                    "matchCriteriaId": "07B237A9-69A3-4A9C-9DA0-4E06BD37AE73",
                    "vulnerable": true
                  }
                ],
                "negate": false,
                "operator": "OR"
              }
            ]
          }
        ],
        "descriptions": [
          {
            "lang": "en",
            "value": "drivers/video/fbdev/smscufx.c in the Linux kernel through 5.19.12 has a race condition and resultant use-after-free if a physically proximate attacker removes a USB device while calling open(), aka a race condition between ufx_ops_open and ufx_usb_disconnect."
          },
          {
            "lang": "es",
            "value": "El archivo drivers/video/fbdev/smscufx.c en el kernel de Linux versiones hasta 5.19.12, presenta una condici\u00f3n de carrera y un uso de memoria previamente liberada resultante si un atacante f\u00edsicamente cercano elimina un dispositivo USB mientras llama a open(), tambi\u00e9n se conoce como una condici\u00f3n de carrera entre ufx_ops_open y ufx_usb_disconnect"
          }
        ],
        "id": "CVE-2022-41849",
        "lastModified": "2024-03-25T01:15:52.500",
        "metrics": {
          "cvssMetricV31": [
            {
              "cvssData": {
                "attackComplexity": "HIGH",
                "attackVector": "PHYSICAL",
                "availabilityImpact": "HIGH",
                "baseScore": 4.2,
                "baseSeverity": "MEDIUM",
                "confidentialityImpact": "NONE",
                "integrityImpact": "NONE",
                "privilegesRequired": "NONE",
                "scope": "UNCHANGED",
                "userInteraction": "NONE",
                "vectorString": "CVSS:3.1/AV:P/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
                "version": "3.1"
              },
              "exploitabilityScore": 0.5,
              "impactScore": 3.6,
              "source": "nvd@nist.gov",
              "type": "Primary"
            }
          ]
        },
        "published": "2022-09-30T06:15:12.110",
        "references": [
          {
            "source": "cve@mitre.org",
            "url": "https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=5610bcfe8693c02e2e4c8b31427f1bdbdecc839c"
          },
          {
            "source": "cve@mitre.org",
            "tags": [
              "Mailing List",
              "Third Party Advisory"
            ],
            "url": "https://lists.debian.org/debian-lts-announce/2022/12/msg00031.html"
          },
          {
            "source": "cve@mitre.org",
            "tags": [
              "Mailing List",
              "Third Party Advisory"
            ],
            "url": "https://lists.debian.org/debian-lts-announce/2022/12/msg00034.html"
          },
          {
            "source": "cve@mitre.org",
            "url": "https://lore.kernel.org/all/20220925133243.GA383897%40ubuntu/T/"
          }
        ],
        "sourceIdentifier": "cve@mitre.org",
        "vulnStatus": "Modified",
        "weaknesses": [
          {
            "description": [
              {
                "lang": "en",
                "value": "CWE-362"
              },
              {
                "lang": "en",
                "value": "CWE-416"
              }
            ],
            "source": "nvd@nist.gov",
            "type": "Primary"
          }
        ]
      }
    }
  }
}

{
  "document": {
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited. (TLPv2: TLP:CLEAR)",
      "tlp": {
        "label": "WHITE"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP V1.0.\n\nSiemens has released a new version for SIMATIC S7-1500 TM MFP -\u00a0GNU/Linux subsystem and recommends to update to the latest version.\n\nThis advisory lists vulnerabilities for firmware version V1.0 only; for V1.1 refer to Siemens Security Advisory SSA-265688 (\nhttps://cert-portal.siemens.com/productcert/html/ssa-265688.html).",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "Siemens Security Advisories are subject to the terms and conditions contained in Siemens\u0027 underlying license terms or other applicable agreements previously agreed to with Siemens (hereinafter \"License Terms\"). To the extent applicable to information, software or documentation made available in or through a Siemens Security Advisory, the Terms of Use of Siemens\u0027 Global Website (https://www.siemens.com/terms_of_use, hereinafter \"Terms of Use\"), in particular Sections 8-10 of the Terms of Use, shall apply additionally. In case of conflicts, the License Terms shall prevail over the Terms of Use.",
        "title": "Terms of Use"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "productcert@siemens.com",
      "name": "Siemens ProductCERT",
      "namespace": "https://www.siemens.com"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-794697: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP before V1.1 - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-794697.html"
      },
      {
        "category": "self",
        "summary": "SSA-794697: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP before V1.1 - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-794697.json"
      },
      {
        "category": "self",
        "summary": "SSA-794697: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP before V1.1 - PDF Version",
        "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-794697.pdf"
      },
      {
        "category": "self",
        "summary": "SSA-794697: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP before V1.1 - TXT Version",
        "url": "https://cert-portal.siemens.com/productcert/txt/ssa-794697.txt"
      }
    ],
    "title": "SSA-794697: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP before V1.1",
    "tracking": {
      "current_release_date": "2024-04-09T00:00:00Z",
      "generator": {
        "engine": {
          "name": "Siemens ProductCERT CSAF Generator",
          "version": "1"
        }
      },
      "id": "SSA-794697",
      "initial_release_date": "2023-06-13T00:00:00Z",
      "revision_history": [
        {
          "date": "2023-06-13T00:00:00Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        },
        {
          "date": "2023-07-11T00:00:00Z",
          "legacy_version": "1.1",
          "number": "2",
          "summary": "Added CVE-2022-4269, CVE-2023-3141, CVE-2023-3268, CVE-2023-31436, CVE-2023-32233"
        },
        {
          "date": "2023-08-08T00:00:00Z",
          "legacy_version": "1.2",
          "number": "3",
          "summary": "Added CVE-2023-3446, CVE-2023-3389, CVE-2022-1015, \r\nCVE-2023-3609"
        },
        {
          "date": "2023-09-12T00:00:00Z",
          "legacy_version": "1.3",
          "number": "4",
          "summary": "Added CVE-2023-3338"
        },
        {
          "date": "2023-11-14T00:00:00Z",
          "legacy_version": "1.4",
          "number": "5",
          "summary": "Added CVE-2023-1206, CVE-2023-2898, CVE-2023-3610, CVE-2023-3611, CVE-2023-3772, CVE-2023-3773, CVE-2023-3777, CVE-2023-4004, CVE-2023-4015, CVE-2023-4273, CVE-2023-4623, CVE-2023-4921, CVE-2023-35001, CVE-2023-37453, CVE-2023-39192, CVE-2023-39193, CVE-2023-39194, CVE-2023-42753, CVE-2023-42755"
        },
        {
          "date": "2023-12-12T00:00:00Z",
          "legacy_version": "1.5",
          "number": "6",
          "summary": "Added CVE-2021-44879, CVE-2023-5178, CVE-2023-5197, CVE-2023-5678, CVE-2023-5717, CVE-2023-31085, CVE-2023-35827, CVE-2023-39189, CVE-2023-42754, CVE-2023-45863, CVE-2023-45871"
        },
        {
          "date": "2024-01-09T00:00:00Z",
          "legacy_version": "1.6",
          "number": "7",
          "summary": "Added CVE-2023-48795"
        },
        {
          "date": "2024-02-13T00:00:00Z",
          "legacy_version": "1.7",
          "number": "8",
          "summary": "Added CVE-2020-12762, CVE-2023-6606, CVE-2023-6931, CVE-2023-6932, CVE-2023-7008, CVE-2023-7104, CVE-2023-36660, CVE-2023-50495, CVE-2023-51384, CVE-2023-51385, CVE-2023-51767, CVE-2024-0232, CVE-2024-0553, CVE-2024-0567, CVE-2024-0584, CVE-2024-0684, CVE-2024-22365, CVE-2024-25062"
        },
        {
          "date": "2024-04-09T00:00:00Z",
          "legacy_version": "1.8",
          "number": "9",
          "summary": "Added fix for SIMATIC S7-1500 TM MFP - GNU/Linux subsystem"
        }
      ],
      "status": "interim",
      "version": "9"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV1.1",
                "product": {
                  "name": "SIMATIC S7-1500 TM MFP -\u00a0GNU/Linux subsystem",
                  "product_id": "1"
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 TM MFP -\u00a0GNU/Linux subsystem"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2020-12762",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "json-c through 0.14 has an integer overflow and out-of-bounds write via a large JSON file, as demonstrated by printbuf_memappend.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2020-12762"
    },
    {
      "cve": "CVE-2021-3759",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A memory overflow vulnerability was found in the Linux kernel\u2019s ipc functionality of the memcg subsystem, in the way a user calls the semget function multiple times, creating semaphores. This flaw allows a local user to starve the resources, causing a denial of service. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2021-3759"
    },
    {
      "cve": "CVE-2021-4037",
      "cwe": {
        "id": "CWE-284",
        "name": "Improper Access Control"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in the fs/inode.c:inode_init_owner() function logic of the LInux kernel that allows local users to create files for the XFS file-system with an unintended group ownership and with group execution and SGID permission bits set, in a scenario where a directory is SGID and belongs to a certain group and is writable by a user who is not a member of this group. This can lead to excessive permissions granted in case when they should not. This vulnerability is similar to the previous CVE-2018-13405 and adds the missed fix for the XFS.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2021-4037"
    },
    {
      "cve": "CVE-2021-33655",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When sending malicous data to kernel by ioctl cmd FBIOPUT_VSCREENINFO,kernel will write memory out of bounds.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2021-33655"
    },
    {
      "cve": "CVE-2021-44879",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In gc_data_segment in fs/f2fs/gc.c in the Linux kernel before 5.16.3, special files are not considered, leading to a move_data_page NULL pointer dereference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2021-44879"
    },
    {
      "cve": "CVE-2022-0171",
      "cwe": {
        "id": "CWE-459",
        "name": "Incomplete Cleanup"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel. The existing KVM SEV API has a vulnerability that allows a non-root (host) user-level application to crash the host kernel by creating a confidential guest VM instance in AMD CPU that supports Secure Encrypted Virtualization (SEV).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-0171"
    },
    {
      "cve": "CVE-2022-1012",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A memory leak problem was found in the TCP source port generation algorithm in net/ipv4/tcp.c due to the small table perturb size. This flaw may allow an attacker to information leak and may cause a denial of service problem.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1012"
    },
    {
      "cve": "CVE-2022-1015",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel in linux/net/netfilter/nf_tables_api.c of the netfilter subsystem. This flaw allows a local user to cause an out-of-bounds write issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1015"
    },
    {
      "cve": "CVE-2022-1184",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in fs/ext4/namei.c:dx_insert_block() in the Linux kernel\u2019s filesystem sub-component. This flaw allows a local attacker with a user privilege to cause a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1184"
    },
    {
      "cve": "CVE-2022-1292",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The c_rehash script does not properly sanitise shell metacharacters to prevent command injection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1292"
    },
    {
      "cve": "CVE-2022-1343",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Under certain circumstances, the command line OCSP verify function reports successful verification when the verification in fact failed. In this case the incorrect successful response will also be accompanied by error messages showing the failure and contradicting the apparently successful result.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1343"
    },
    {
      "cve": "CVE-2022-1434",
      "cwe": {
        "id": "CWE-327",
        "name": "Use of a Broken or Risky Cryptographic Algorithm"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When using the RC4-MD5 ciphersuite, which is disabled by default, an attacker is able to modify data in transit due to an incorrect use of the AAD data as the MAC key in OpenSSL 3.0. An attacker is not able to decrypt any communication.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1434"
    },
    {
      "cve": "CVE-2022-1462",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds read flaw was found in the Linux kernel\u2019s TeleTYpe subsystem. The issue occurs in how a user triggers a race condition using ioctls TIOCSPTLCK and TIOCGPTPEER and TIOCSTI and TCXONC with leakage of memory in the flush_to_ldisc function. This flaw allows a local user to crash the system or read unauthorized random data from memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1462"
    },
    {
      "cve": "CVE-2022-1473",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The used OpenSSL version improperly reuses memory when decoding certificates or keys. This can lead to a process termination and Denial of Service for long lived processes.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1473"
    },
    {
      "cve": "CVE-2022-1679",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in the Linux kernel\u2019s Atheros wireless adapter driver in the way a user forces the ath9k_htc_wait_for_target function to fail with some input messages. This flaw allows a local user to crash or potentially escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1679"
    },
    {
      "cve": "CVE-2022-1852",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference flaw was found in the Linux kernel\u2019s KVM module, which can lead to a denial of service in the x86_emulate_insn in arch/x86/kvm/emulate.c. This flaw occurs while executing an illegal instruction in guest in the Intel CPU.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1852"
    },
    {
      "cve": "CVE-2022-1882",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in the Linux kernel\u2019s pipes functionality in how a user performs manipulations with the pipe post_one_notification() after free_pipe_info() that is already called. This flaw allows a local user to crash or potentially escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1882"
    },
    {
      "cve": "CVE-2022-2068",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In addition to the c_rehash shell command injection identified in CVE-2022-1292, further circumstances where the c_rehash script does not properly sanitise shell metacharacters to prevent command injection were found by code review. When the CVE-2022-1292 was fixed it was not discovered that there are other places in the script where the file names of certificates being hashed were possibly passed to a command executed through the shell. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2068"
    },
    {
      "cve": "CVE-2022-2078",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in the Linux kernel\u0027s nft_set_desc_concat_parse() function .This flaw allows an attacker to trigger a buffer overflow via nft_set_desc_concat_parse() , causing a denial of service and possibly to run code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2078"
    },
    {
      "cve": "CVE-2022-2097",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "AES OCB mode for 32-bit x86 platforms using the AES-NI assembly optimised implementation will not encrypt the entirety of the data under some circumstances. This could reveal sixteen bytes of data that was preexisting in the memory that wasn\u0027t written. In the special case of \"in place\" encryption, sixteen bytes of the plaintext would be revealed. Since OpenSSL does not support OCB based cipher suites for TLS and DTLS, they are both unaffected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2097"
    },
    {
      "cve": "CVE-2022-2153",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel\u2019s KVM when attempting to set a SynIC IRQ. This issue makes it possible for a misbehaving VMM to write to SYNIC/STIMER MSRs, causing a NULL pointer dereference. This flaw allows an unprivileged local attacker on the host to issue specific ioctl calls, causing a kernel oops condition that results in a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2153"
    },
    {
      "cve": "CVE-2022-2274",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The OpenSSL 3.0.4 release introduced a serious bug in the RSA implementation for X86_64 CPUs supporting the AVX512IFMA instructions. This issue makes the RSA implementation with 2048 bit private keys incorrect on such machines and memory corruption will happen during the computation. As a consequence of the memory corruption an attacker may be able to trigger a remote code execution on the machine performing the computation. SSL/TLS servers or other servers using 2048 bit RSA private keys running on machines supporting AVX512IFMA instructions of the X86_64 architecture are affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2274"
    },
    {
      "cve": "CVE-2022-2327",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "io_uring use work_flags to determine which identity need to grab from the calling process to make sure it is consistent with the calling process when executing IORING_OP. Some operations are missing some types, which can lead to incorrect reference counts which can then lead to a double free. We recommend upgrading the kernel past commit df3f3bb5059d20ef094d6b2f0256c4bf4127a859",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2327"
    },
    {
      "cve": "CVE-2022-2503",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Dm-verity is used for extending root-of-trust to root filesystems. LoadPin builds on this property to restrict module/firmware loads to just the trusted root filesystem. Device-mapper table reloads currently allow users with root privileges to switch out the target with an equivalent dm-linear target and bypass verification till reboot. This allows root to bypass LoadPin and can be used to load untrusted and unverified kernel modules and firmware, which implies arbitrary kernel execution and persistence for peripherals that do not verify firmware updates. We recommend upgrading past commit 4caae58406f8ceb741603eee460d79bacca9b1b5",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2503"
    },
    {
      "cve": "CVE-2022-2586",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in nf_tables cross-table in the net/netfilter/nf_tables_api.c function in the Linux kernel. This flaw allows a local, privileged attacker to cause a use-after-free problem at the time of table deletion, possibly leading to local privilege escalation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2586"
    },
    {
      "cve": "CVE-2022-2588",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Zhenpeng Lin discovered that the network packet scheduler implementation in the Linux kernel did not properly remove all references to a route filter before freeing it in some situations. A local attacker could use this to cause a denial of service (system crash) or execute arbitrary code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2588"
    },
    {
      "cve": "CVE-2022-2602",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel. A race issue occurs between an io_uring request and the Unix socket garbage collector, allowing an attacker local privilege escalation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2602"
    },
    {
      "cve": "CVE-2022-2663",
      "cwe": {
        "id": "CWE-923",
        "name": "Improper Restriction of Communication Channel to Intended Endpoints"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was found in the Linux kernel in nf_conntrack_irc where the message handling can be confused and incorrectly matches the message. A firewall may be able to be bypassed when users are using unencrypted IRC with nf_conntrack_irc configured.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2663"
    },
    {
      "cve": "CVE-2022-2905",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds memory read flaw was found in the Linux kernel\u0027s BPF subsystem in how a user calls the bpf_tail_call function with a key larger than the max_entries of the map. This flaw allows a local user to gain unauthorized access to data.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2905"
    },
    {
      "cve": "CVE-2022-2959",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A race condition was found in the Linux kernel\u0027s watch queue due to a missing lock in pipe_resize_ring(). The specific flaw exists within the handling of pipe buffers. The issue results from the lack of proper locking when performing operations on an object. This flaw allows a local user to crash the system or escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2959"
    },
    {
      "cve": "CVE-2022-2978",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw use after free in the Linux kernel NILFS file system was found in the way user triggers function security_inode_alloc to fail with following call to function nilfs_mdt_destroy. A local user could use this flaw to crash the system or potentially escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2978"
    },
    {
      "cve": "CVE-2022-3028",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A race condition was found in the Linux kernel\u0027s IP framework for transforming packets (XFRM subsystem) when multiple calls to xfrm_probe_algs occurred simultaneously. This flaw could allow a local attacker to potentially trigger an out-of-bounds write or leak kernel heap memory by performing an out-of-bounds read and copying it into a socket.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3028"
    },
    {
      "cve": "CVE-2022-3104",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 5.16-rc6. lkdtm_ARRAY_BOUNDS in drivers/misc/lkdtm/bugs.c lacks check of the return value of kmalloc() and will cause the null pointer dereference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3104"
    },
    {
      "cve": "CVE-2022-3115",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 5.16-rc6. malidp_crtc_reset in drivers/gpu/drm/arm/malidp_crtc.c lacks check of the return value of kzalloc() and will cause the null pointer dereference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3115"
    },
    {
      "cve": "CVE-2022-3169",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel. A denial of service flaw may occur if there is a consecutive request of the NVME_IOCTL_RESET and the NVME_IOCTL_SUBSYS_RESET through the device file of the driver, resulting in a PCIe link disconnect.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3169"
    },
    {
      "cve": "CVE-2022-3303",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A race condition flaw was found in the Linux kernel sound subsystem due to improper locking. It could lead to a NULL pointer dereference while handling the SNDCTL_DSP_SYNC ioctl. A privileged local user (root or member of the audio group) could use this flaw to crash the system, resulting in a denial of service condition",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3303"
    },
    {
      "cve": "CVE-2022-3521",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability has been found in Linux Kernel and classified as problematic. This vulnerability affects the function kcm_tx_work of the file net/kcm/kcmsock.c of the component kcm. The manipulation leads to race condition. It is recommended to apply a patch to fix this issue. VDB-211018 is the identifier assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 2.5,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3521"
    },
    {
      "cve": "CVE-2022-3524",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been declared as problematic. Affected by this vulnerability is the function ipv6_renew_options of the component IPv6 Handler. The manipulation leads to memory leak. The attack can be launched remotely. It is recommended to apply a patch to fix this issue. The identifier VDB-211021 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3524"
    },
    {
      "cve": "CVE-2022-3534",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability classified as critical has been found in Linux Kernel. Affected is the function btf_dump_name_dups of the file tools/lib/bpf/btf_dump.c of the component libbpf. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211032.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3534"
    },
    {
      "cve": "CVE-2022-3545",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability has been found in Linux Kernel and classified as critical. Affected by this vulnerability is the function area_cache_get of the file drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c of the component IPsec. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier VDB-211045 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3545"
    },
    {
      "cve": "CVE-2022-3564",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability classified as critical was found in Linux Kernel. Affected by this vulnerability is the function l2cap_reassemble_sdu of the file net/bluetooth/l2cap_core.c of the component Bluetooth. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-211087.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3564"
    },
    {
      "cve": "CVE-2022-3565",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability, which was classified as critical, has been found in Linux Kernel. Affected by this issue is the function del_timer of the file drivers/isdn/mISDN/l1oip_core.c of the component Bluetooth. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211088.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3565"
    },
    {
      "cve": "CVE-2022-3586",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel\u2019s networking code. A use-after-free was found in the way the sch_sfb enqueue function used the socket buffer (SKB) cb field after the same SKB had been enqueued (and freed) into a child qdisc. This flaw allows a local, unprivileged user to crash the system, causing a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3586"
    },
    {
      "cve": "CVE-2022-3594",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been declared as problematic. Affected by this vulnerability is the function intr_callback of the file drivers/net/usb/r8152.c of the component BPF. The manipulation leads to logging of excessive data. The attack can be launched remotely. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-211363.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3594"
    },
    {
      "cve": "CVE-2022-3606",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been classified as problematic. This affects the function find_prog_by_sec_insn of the file tools/lib/bpf/libbpf.c of the component BPF. The manipulation leads to null pointer dereference. It is recommended to apply a patch to fix this issue. The identifier VDB-211749 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3606"
    },
    {
      "cve": "CVE-2022-3621",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been classified as problematic. Affected is the function nilfs_bmap_lookup_at_level of the file fs/nilfs2/inode.c of the component nilfs2. The manipulation leads to null pointer dereference. It is possible to launch the attack remotely. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211920.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3621"
    },
    {
      "cve": "CVE-2022-3625",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been classified as critical. This affects the function devlink_param_set/devlink_param_get of the file net/core/devlink.c of the component IPsec. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier VDB-211929 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3625"
    },
    {
      "cve": "CVE-2022-3628",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A buffer overflow flaw was found in the Linux kernel Broadcom Full MAC Wi-Fi driver. This issue occurs when a user connects to a malicious USB device. This can allow a local user to crash the system or escalate their privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:P/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3628"
    },
    {
      "cve": "CVE-2022-3629",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been declared as problematic. This vulnerability affects the function vsock_connect of the file net/vmw_vsock/af_vsock.c. The manipulation leads to memory leak. It is recommended to apply a patch to fix this issue. VDB-211930 is the identifier assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3629"
    },
    {
      "cve": "CVE-2022-3633",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability classified as problematic has been found in Linux Kernel. Affected is the function j1939_session_destroy of the file net/can/j1939/transport.c. The manipulation leads to memory leak. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211932.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3633"
    },
    {
      "cve": "CVE-2022-3635",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability, which was classified as critical, has been found in Linux Kernel. Affected by this issue is the function tst_timer of the file drivers/atm/idt77252.c of the component IPsec. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. VDB-211934 is the identifier assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3635"
    },
    {
      "cve": "CVE-2022-3646",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability, which was classified as problematic, has been found in Linux Kernel. This issue affects the function nilfs_attach_log_writer of the file fs/nilfs2/segment.c of the component BPF. The manipulation leads to memory leak. The attack may be initiated remotely. It is recommended to apply a patch to fix this issue. The identifier VDB-211961 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3646"
    },
    {
      "cve": "CVE-2022-3649",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been classified as problematic. Affected is the function nilfs_new_inode of the file fs/nilfs2/inode.c of the component BPF. The manipulation leads to use after free. It is possible to launch the attack remotely. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211992.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3649"
    },
    {
      "cve": "CVE-2022-4095",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in Linux kernel before 5.19.2. This issue occurs in cmd_hdl_filter in drivers/staging/rtl8712/rtl8712_cmd.c, allowing an attacker to launch a local denial of service attack and gain escalation of privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-4095"
    },
    {
      "cve": "CVE-2022-4129",
      "cwe": {
        "id": "CWE-667",
        "name": "Improper Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel\u0027s Layer 2 Tunneling Protocol (L2TP). A missing lock when clearing sk_user_data can lead to a race condition and NULL pointer dereference. A local user could use this flaw to potentially crash the system causing a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-4129"
    },
    {
      "cve": "CVE-2022-4139",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An incorrect TLB flush issue was found in the Linux kernel\u2019s GPU i915 kernel driver, potentially leading to random memory corruption or data leaks. This flaw could allow a local user to crash the system or escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-4139"
    },
    {
      "cve": "CVE-2022-4269",
      "cwe": {
        "id": "CWE-833",
        "name": "Deadlock"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel Traffic Control (TC) subsystem. Using a specific networking configuration (redirecting egress packets to ingress using TC action \"mirred\") a local unprivileged user could trigger a CPU soft lockup (ABBA deadlock) when the transport protocol in use (TCP or SCTP) does a retransmission, resulting in a denial of service condition.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-4269"
    },
    {
      "cve": "CVE-2022-4304",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful decryption an attacker would have to be able to send a very large number of trial messages for decryption. The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An attacker that had observed a genuine connection between a client and a server could use this flaw to send trial messages to the server and record the time taken to process them. After a sufficiently large number of messages the attacker could recover the pre-master secret used for the original connection and thus be able to decrypt the application data sent over that connection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-4304"
    },
    {
      "cve": "CVE-2022-4450",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the \"name\" (e.g. \"CERTIFICATE\"), any header data and the payload data. If the function succeeds then the \"name_out\", \"header\" and \"data\" arguments are populated with pointers to buffers containing the relevant decoded data. The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate the header argument with a pointer to a buffer that has already been freed. If the caller also frees this buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and therefore these functions are also directly affected. These functions are also called indirectly by a number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file() which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL asn1parse command line application is also impacted by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-4450"
    },
    {
      "cve": "CVE-2022-4662",
      "cwe": {
        "id": "CWE-455",
        "name": "Non-exit on Failed Initialization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw incorrect access control in the Linux kernel USB core subsystem was found in the way user attaches usb device. A local user could use this flaw to crash the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-4662"
    },
    {
      "cve": "CVE-2022-20421",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In binder_inc_ref_for_node of binder.c, there is a possible way to corrupt memory due to a use after free. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-239630375References: Upstream kernel",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-20421"
    },
    {
      "cve": "CVE-2022-20422",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In emulation_proc_handler of armv8_deprecated.c, there is a possible way to corrupt memory due to a race condition. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-237540956References: Upstream kernel",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-20422"
    },
    {
      "cve": "CVE-2022-20566",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In l2cap_chan_put of l2cap_core, there is a possible use after free due to improper locking. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-165329981References: Upstream kernel",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-20566"
    },
    {
      "cve": "CVE-2022-20572",
      "cwe": {
        "id": "CWE-863",
        "name": "Incorrect Authorization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In verity_target of dm-verity-target.c, there is a possible way to modify read-only files due to a missing permission check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-234475629References: Upstream kernel",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-20572"
    },
    {
      "cve": "CVE-2022-21123",
      "cwe": {
        "id": "CWE-459",
        "name": "Incomplete Cleanup"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Incomplete cleanup of multi-core shared buffers for some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-21123"
    },
    {
      "cve": "CVE-2022-21125",
      "cwe": {
        "id": "CWE-459",
        "name": "Incomplete Cleanup"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Incomplete cleanup of microarchitectural fill buffers on some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-21125"
    },
    {
      "cve": "CVE-2022-21166",
      "cwe": {
        "id": "CWE-459",
        "name": "Incomplete Cleanup"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Incomplete cleanup in specific special register write operations for some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-21166"
    },
    {
      "cve": "CVE-2022-21505",
      "cwe": {
        "id": "CWE-305",
        "name": "Authentication Bypass by Primary Weakness"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A bug in the IMA subsystem was discovered which would incorrectly allow kexec to be used when kernel lockdown was enabled",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-21505"
    },
    {
      "cve": "CVE-2022-26373",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Non-transparent sharing of return predictor targets between contexts in some Intel(R) Processors may allow an authorized user to potentially enable information disclosure via local access.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-26373"
    },
    {
      "cve": "CVE-2022-32250",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "net/netfilter/nf_tables_api.c in the Linux kernel through 5.18.1 allows a local user (able to create user/net namespaces) to escalate privileges to root because an incorrect NFT_STATEFUL_EXPR check leads to a use-after-free.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-32250"
    },
    {
      "cve": "CVE-2022-32296",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Linux kernel before 5.17.9 allows TCP servers to identify clients by observing what source ports are used. This occurs because of use of Algorithm 4 (\"Double-Hash Port Selection Algorithm\") of RFC 6056.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-32296"
    },
    {
      "cve": "CVE-2022-34918",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 5.18.9. A type confusion bug in nft_set_elem_init (leading to a buffer overflow) could be used by a local attacker to escalate privileges, a different vulnerability than CVE-2022-32250. (The attacker can obtain root access, but must start with an unprivileged user namespace to obtain CAP_NET_ADMIN access.) This can be fixed in nft_setelem_parse_data in net/netfilter/nf_tables_api.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-34918"
    },
    {
      "cve": "CVE-2022-36123",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Linux kernel before 5.18.13 lacks a certain clear operation for the block starting symbol (.bss). This allows Xen PV guest OS users to cause a denial of service or gain privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-36123"
    },
    {
      "cve": "CVE-2022-36280",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds(OOB) memory access vulnerability was found in vmwgfx driver in drivers/gpu/vmxgfx/vmxgfx_kms.c in GPU component in the Linux kernel with device file \u0027/dev/dri/renderD128 (or Dxxx)\u0027. This flaw allows a local attacker with a user account on the system to gain privilege, causing a denial of service(DoS).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-36280"
    },
    {
      "cve": "CVE-2022-36879",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 5.18.14. xfrm_expand_policies in net/xfrm/xfrm_policy.c can cause a refcount to be dropped twice.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-36879"
    },
    {
      "cve": "CVE-2022-36946",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nfqnl_mangle in net/netfilter/nfnetlink_queue.c in the Linux kernel through 5.18.14 allows remote attackers to cause a denial of service (panic) because, in the case of an nf_queue verdict with a one-byte nfta_payload attribute, an skb_pull can encounter a negative skb-\u003elen.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-36946"
    },
    {
      "cve": "CVE-2022-39188",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in include/asm-generic/tlb.h in the Linux kernel before 5.19. Because of a race condition (unmap_mapping_range versus munmap), a device driver can free a page while it still has stale TLB entries. This only occurs in situations with VM_PFNMAP VMAs.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-39188"
    },
    {
      "cve": "CVE-2022-39190",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in net/netfilter/nf_tables_api.c in the Linux kernel before 5.19.6. A denial of service can occur upon binding to an already bound chain.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-39190"
    },
    {
      "cve": "CVE-2022-40307",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 5.19.8. drivers/firmware/efi/capsule-loader.c has a race condition with a resultant use-after-free.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-40307"
    },
    {
      "cve": "CVE-2022-40768",
      "cwe": {
        "id": "CWE-668",
        "name": "Exposure of Resource to Wrong Sphere"
      },
      "notes": [
        {
          "category": "summary",
          "text": "drivers/scsi/stex.c in the Linux kernel through 5.19.9 allows local users to obtain sensitive information from kernel memory because stex_queuecommand_lck lacks a memset for the PASSTHRU_CMD case.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-40768"
    },
    {
      "cve": "CVE-2022-41218",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In drivers/media/dvb-core/dmxdev.c in the Linux kernel through 5.19.10, there is a use-after-free caused by refcount races, affecting dvb_demux_open and dvb_dmxdev_release.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-41218"
    },
    {
      "cve": "CVE-2022-41222",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "mm/mremap.c in the Linux kernel before 5.13.3 has a use-after-free via a stale TLB because an rmap lock is not held during a PUD move.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-41222"
    },
    {
      "cve": "CVE-2022-41674",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel before 5.19.16. Attackers able to inject WLAN frames could cause a buffer overflow in the ieee80211_bss_info_update function in net/mac80211/scan.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-41674"
    },
    {
      "cve": "CVE-2022-41849",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "drivers/video/fbdev/smscufx.c in the Linux kernel through 5.19.12 has a race condition and resultant use-after-free if a physically proximate attacker removes a USB device while calling open(), aka a race condition between ufx_ops_open and ufx_usb_disconnect.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.2,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:P/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-41849"
    },
    {
      "cve": "CVE-2022-41850",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "roccat_report_event in drivers/hid/hid-roccat.c in the Linux kernel through 5.19.12 has a race condition and resultant use-after-free in certain situations where a report is received while copying a report-\u003evalue is in progress.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-41850"
    },
    {
      "cve": "CVE-2022-42328",
      "cwe": {
        "id": "CWE-667",
        "name": "Improper Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Guests can trigger deadlock in Linux netback driver [This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] The patch for XSA-392 introduced another issue which might result in a deadlock when trying to free the SKB of a packet dropped due to the XSA-392 handling (CVE-2022-42328). Additionally when dropping packages for other reasons the same deadlock could occur in case of netpoll being active for the interface the xen-netback driver is connected to (CVE-2022-42329).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42328"
    },
    {
      "cve": "CVE-2022-42329",
      "cwe": {
        "id": "CWE-667",
        "name": "Improper Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Guests can trigger deadlock in Linux netback drive. The patch for XSA-392 introduced another issue which might result in a deadlock when trying to free the SKB of a packet dropped due to the XSA-392 handling (CVE-2022-42328). Additionally when dropping packages for other reasons the same deadlock could occur in case of netpoll being active for the interface the xen-netback driver is connected to (CVE-2022-42329).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42329"
    },
    {
      "cve": "CVE-2022-42432",
      "cwe": {
        "id": "CWE-457",
        "name": "Use of Uninitialized Variable"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This vulnerability allows local attackers to disclose sensitive information on affected installations of the Linux Kernel 6.0-rc2. An attacker must first obtain the ability to execute high-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the nft_osf_eval function. The issue results from the lack of proper initialization of memory prior to accessing it. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of the kernel. Was ZDI-CAN-18540.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42432"
    },
    {
      "cve": "CVE-2022-42703",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "mm/rmap.c in the Linux kernel before 5.19.7 has a use-after-free related to leaf anon_vma double reuse.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42703"
    },
    {
      "cve": "CVE-2022-42719",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free in the mac80211 stack when parsing a multi-BSSID element in the Linux kernel 5.2 through 5.19.x before 5.19.16 could be used by attackers (able to inject WLAN frames) to crash the kernel and potentially execute code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42719"
    },
    {
      "cve": "CVE-2022-42720",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Various refcounting bugs in the multi-BSS handling in the mac80211 stack in the Linux kernel 5.1 through 5.19.x before 5.19.16 could be used by local attackers (able to inject WLAN frames) to trigger use-after-free conditions to potentially execute code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42720"
    },
    {
      "cve": "CVE-2022-42721",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A list management bug in BSS handling in the mac80211 stack in the Linux kernel 5.1 through 5.19.x before 5.19.16 could be used by local attackers (able to inject WLAN frames) to corrupt a linked list and, in turn, potentially execute code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42721"
    },
    {
      "cve": "CVE-2022-42722",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel 5.8 through 5.19.x before 5.19.16, local attackers able to inject WLAN frames into the mac80211 stack could cause a NULL pointer dereference denial-of-service attack against the beacon protection of P2P devices.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42722"
    },
    {
      "cve": "CVE-2022-42895",
      "cwe": {
        "id": "CWE-824",
        "name": "Access of Uninitialized Pointer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is an infoleak vulnerability in the Linux kernel\u0027s net/bluetooth/l2cap_core.c\u0027s l2cap_parse_conf_req function which can be used to leak kernel pointers remotely. We recommend upgrading past commit https://github.com/torvalds/linux/commit/b1a2cd50c0357f243b7435a732b4e62ba3157a2e",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42895"
    },
    {
      "cve": "CVE-2022-42896",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There are use-after-free vulnerabilities in the Linux kernel\u0027s net/bluetooth/l2cap_core.c\u0027s l2cap_connect and l2cap_le_connect_req functions which may allow code execution and leaking kernel memory (respectively) remotely via Bluetooth. A remote attacker could execute code leaking kernel memory via Bluetooth if within proximity of the victim. We recommend upgrading past commit https://github.com/torvalds/linux/commit/711f8c3fb3db61897080468586b970c87c61d9e4",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42896"
    },
    {
      "cve": "CVE-2022-43750",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "drivers/usb/mon/mon_bin.c in usbmon in the Linux kernel before 5.19.15 and 6.x before 6.0.1 allows a user-space client to corrupt the monitor\u0027s internal memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-43750"
    },
    {
      "cve": "CVE-2022-47518",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel before 6.0.11. Missing validation of the number of channels in drivers/net/wireless/microchip/wilc1000/cfg80211.c in the WILC1000 wireless driver can trigger a heap-based buffer overflow when copying the list of operating channels from Wi-Fi management frames.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-47518"
    },
    {
      "cve": "CVE-2022-47520",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel before 6.0.11. Missing offset validation in drivers/net/wireless/microchip/wilc1000/hif.c in the WILC1000 wireless driver can trigger an out-of-bounds read when parsing a Robust Security Network (RSN) information element from a Netlink packet.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-47520"
    },
    {
      "cve": "CVE-2022-47929",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel before 6.1.6, a NULL pointer dereference bug in the traffic control subsystem allows an unprivileged user to trigger a denial of service (system crash) via a crafted traffic control configuration that is set up with \"tc qdisc\" and \"tc class\" commands. This affects qdisc_graft in net/sched/sch_api.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-47929"
    },
    {
      "cve": "CVE-2022-47946",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel 5.10.x before 5.10.155. A use-after-free in io_sqpoll_wait_sq in fs/io_uring.c allows an attacker to crash the kernel, resulting in denial of service. finish_wait can be skipped. An attack can occur in some situations by forking a process and then quickly terminating it. NOTE: later kernel versions, such as the 5.15 longterm series, substantially changed the implementation of io_sqpoll_wait_sq.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-47946"
    },
    {
      "cve": "CVE-2023-0215",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may also be called directly by end user applications. The function receives a BIO from the caller, prepends a new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid, the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call BIO_pop() on the BIO. This internal function is in turn called by the public API functions PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1, SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL cms and smime command line applications are similarly affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-0215"
    },
    {
      "cve": "CVE-2023-0286",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName. X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these inputs, the other input must already contain an X.400 address as a CRL distribution point, which is uncommon. As such, this vulnerability is most likely to only affect applications which have implemented their own functionality for retrieving CRLs over a network.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-0286"
    },
    {
      "cve": "CVE-2023-0464",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security vulnerability has been identified in all supported versions of OpenSSL related to the verification of X.509 certificate chains that include policy constraints. Attackers may be able to exploit this vulnerability by creating a malicious certificate chain that triggers exponential use of computational resources, leading to a denial-of-service (DoS) attack on affected systems.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing the `-policy` argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-0464"
    },
    {
      "cve": "CVE-2023-0465",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Applications that use a non-default option when verifying certificates may be\r\nvulnerable to an attack from a malicious CA to circumvent certain checks.\r\n\r\nInvalid certificate policies in leaf certificates are silently ignored by\r\nOpenSSL and other certificate policy checks are skipped for that certificate.\r\nA malicious CA could use this to deliberately assert invalid certificate policies\r\nin order to circumvent policy checking on the certificate altogether.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing\r\nthe `-policy` argument to the command line utilities or by calling the\r\n`X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-0465"
    },
    {
      "cve": "CVE-2023-0466",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function X509_VERIFY_PARAM_add0_policy() is documented to\nimplicitly enable the certificate policy check when doing certificate\nverification. However the implementation of the function does not\nenable the check which allows certificates with invalid or incorrect\npolicies to pass the certificate verification.\n\nAs suddenly enabling the policy check could break existing deployments it was\ndecided to keep the existing behavior of the X509_VERIFY_PARAM_add0_policy()\nfunction.\n\nInstead the applications that require OpenSSL to perform certificate\npolicy check need to use X509_VERIFY_PARAM_set1_policies() or explicitly\nenable the policy check by calling X509_VERIFY_PARAM_set_flags() with\nthe X509_V_FLAG_POLICY_CHECK flag argument.\n\nCertificate policy checks are disabled by default in OpenSSL and are not\ncommonly used by applications.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-0466"
    },
    {
      "cve": "CVE-2023-0590",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in qdisc_graft in net/sched/sch_api.c in the Linux Kernel due to a race problem. This flaw leads to a denial of service issue. If patch ebda44da44f6 (\"net: sched: fix race condition in qdisc_graft()\") not applied yet, then kernel could be affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-0590"
    },
    {
      "cve": "CVE-2023-1077",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, pick_next_rt_entity() may return a type confused entry, not detected by the BUG_ON condition, as the confused entry will not be NULL, but list_head.The buggy error condition would lead to a type confused entry with the list head,which would then be used as a type confused sched_rt_entity,causing memory corruption.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-1077"
    },
    {
      "cve": "CVE-2023-1095",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In nf_tables_updtable, if nf_tables_table_enable returns an error, nft_trans_destroy is called to free the transaction object. nft_trans_destroy() calls list_del(), but the transaction was never placed on a list -- the list head is all zeroes, this results in a NULL pointer dereference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-1095"
    },
    {
      "cve": "CVE-2023-1206",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A hash collision flaw was found in the IPv6 connection lookup table in the Linux kernel\u2019s IPv6 functionality when a user makes a new kind of SYN flood attack. A user located in the local network or with a high bandwidth connection can increase the CPU usage of the server that accepts IPV6 connections up to 95%.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-1206"
    },
    {
      "cve": "CVE-2023-2898",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a null-pointer-dereference flaw found in f2fs_write_end_io in fs/f2fs/data.c in the Linux kernel. This flaw allows a local privileged user to cause a denial of service problem.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-2898"
    },
    {
      "cve": "CVE-2023-3141",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in r592_remove in drivers/memstick/host/r592.c in media access in the Linux Kernel. This flaw allows a local attacker to crash the system at device disconnect, possibly leading to a kernel information leak.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-3141"
    },
    {
      "cve": "CVE-2023-3268",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds (OOB) memory access flaw was found in the Linux kernel in relay_file_read_start_pos in kernel/relay.c in the relayfs. This flaw could allow a local attacker to crash the system or leak kernel internal information.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-3268"
    },
    {
      "cve": "CVE-2023-3338",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A null pointer dereference flaw was found in the Linux kernel\u0027s DECnet networking protocol. This issue could allow a remote user to crash the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-3338"
    },
    {
      "cve": "CVE-2023-3389",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux Kernel io_uring subsystem can be exploited to achieve local privilege escalation. Racing a io_uring cancel poll request with a linked timeout can cause a UAF in a hrtimer.\r\n\r\nWe recommend upgrading past commit `ef7dfac51d8ed961b742218f526bd589f3900a59`  \r\n(`4716c73b188566865bdd79c3a6709696a224ac04` for 5.10 stable and   \r\n`0e388fce7aec40992eadee654193cad345d62663` for 5.15 stable).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-3389"
    },
    {
      "cve": "CVE-2023-3446",
      "cwe": {
        "id": "CWE-1333",
        "name": "Inefficient Regular Expression Complexity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus (\u0027p\u0027 parameter) is not too large. Trying to use a very large modulus is slow and OpenSSL will not normally use a modulus which is over 10,000 bits in length. However the DH_check() function checks numerous aspects of the key or parameters that have been supplied. Some of those checks use the supplied modulus value even if it has already been found to be too large. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulernable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \u0027-check\u0027 option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-3446"
    },
    {
      "cve": "CVE-2023-3609",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: cls_u32 component can be exploited to achieve local privilege escalation.\r\n\r\nIf tcf_change_indev() fails, u32_set_parms() will immediately return an error after incrementing or decrementing the reference counter in tcf_bind_filter(). If an attacker can control the reference counter and set it to zero, they can cause the reference to be freed, leading to a use-after-free vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-3609"
    },
    {
      "cve": "CVE-2023-3610",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s netfilter: nf_tables component can be exploited to achieve local privilege escalation.\r\n\r\nFlaw in the error handling of bound chains causes a use-after-free in the abort path of NFT_MSG_NEWRULE. The vulnerability requires CAP_NET_ADMIN to be triggered.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-3610"
    },
    {
      "cve": "CVE-2023-3611",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds write vulnerability in the Linux kernel\u0027s net/sched: sch_qfq component can be exploited to achieve local privilege escalation.\r\n\r\nThe qfq_change_agg() function in net/sched/sch_qfq.c allows an out-of-bounds write because lmax is updated according to packet sizes without bounds checks.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-3611"
    },
    {
      "cve": "CVE-2023-3772",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel\u0027s IP framework for transforming packets (XFRM subsystem). This issue may allow a malicious user with CAP_NET_ADMIN privileges to directly dereference a NULL pointer in xfrm_update_ae_params(), leading to a possible kernel crash and denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-3772"
    },
    {
      "cve": "CVE-2023-3773",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel\u0027s IP framework for transforming packets (XFRM subsystem). This issue may allow a malicious user with CAP_NET_ADMIN privileges to cause a 4 byte out-of-bounds read of XFRMA_MTIMER_THRESH when parsing netlink attributes, leading to potential leakage of sensitive heap data to userspace.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-3773"
    },
    {
      "cve": "CVE-2023-3777",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s netfilter: nf_tables component can be exploited to achieve local privilege escalation.\n\nWhen nf_tables_delrule() is flushing table rules, it is not checked whether the chain is bound and the chain\u0027s owner rule can also release the objects in certain circumstances.\n\nWe recommend upgrading past commit 6eaf41e87a223ae6f8e7a28d6e78384ad7e407f8.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-3777"
    },
    {
      "cve": "CVE-2023-4004",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in the Linux kernel\u0027s netfilter in the way a user triggers the nft_pipapo_remove function with the element, without a NFT_SET_EXT_KEY_END. This issue could allow a local user to crash the system or potentially escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-4004"
    },
    {
      "cve": "CVE-2023-4015",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The netfilter subsystem in the Linux kernel did not properly handle bound chain deactivation in certain circumstances. A local attacker could possibly use this to cause a denial of service (system crash) or execute arbitrary code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-4015"
    },
    {
      "cve": "CVE-2023-4273",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This vulnerability exists in the implementation of the file name reconstruction function, which is responsible for reading file name entries from a directory index and merging file name parts belonging to one file into a single long file name. Since the file name characters are copied into a stack variable, a local privileged attacker could use this vulnerability to overflow the kernel stack.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.0,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-4273"
    },
    {
      "cve": "CVE-2023-4623",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: sch_hfsc (HFSC qdisc traffic control) component can be exploited to achieve local privilege escalation.\n\nIf a class with a link-sharing curve (i.e. with the HFSC_FSC flag set) has a parent without a link-sharing curve, then init_vf() will call vttree_insert() on the parent, but vttree_remove() will be skipped in update_vf(). This leaves a dangling pointer that can cause a use-after-free.\n\nWe recommend upgrading past commit b3d26c5702c7d6c45456326e56d2ccf3f103e60f.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-4623"
    },
    {
      "cve": "CVE-2023-4911",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A buffer overflow was discovered in the GNU C Library\u0027s dynamic loader ld.so while processing the GLIBC_TUNABLES environment variable. This issue could allow a local attacker to use maliciously crafted GLIBC_TUNABLES environment variables when launching binaries with SUID permission to execute code with elevated privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-4911"
    },
    {
      "cve": "CVE-2023-4921",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: sch_qfq component can be exploited to achieve local privilege escalation.\n\nWhen the plug qdisc is used as a class of the qfq qdisc, sending network packets triggers use-after-free in qfq_dequeue() due to the incorrect .peek handler of sch_plug and lack of error checking in agg_dequeue().\n\nWe recommend upgrading past commit 8fc134fee27f2263988ae38920bc03da416b03d8.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-4921"
    },
    {
      "cve": "CVE-2023-5178",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability was found in drivers/nvme/target/tcp.c` in `nvmet_tcp_free_crypto` due to a logical bug in the NVMe-oF/TCP subsystem in the Linux kernel. This issue may allow a malicious local privileged user to cause a use-after-free and double-free problem, which may permit remote code execution or lead to local privilege escalation problem.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-5178"
    },
    {
      "cve": "CVE-2023-5197",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s netfilter: nf_tables component can be exploited to achieve local privilege escalation.\r\n\r\nAddition and removal of rules from chain bindings within the same transaction causes leads to use-after-free.\r\n\r\nWe recommend upgrading past commit f15f29fd4779be8a418b66e9d52979bb6d6c2325.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-5197"
    },
    {
      "cve": "CVE-2023-5678",
      "cwe": {
        "id": "CWE-754",
        "name": "Improper Check for Unusual or Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Generating excessively long X9.42 DH keys or checking excessively long X9.42 DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_generate_key() to generate an X9.42 DH key may experience long delays. Likewise, applications that use DH_check_pub_key(), DH_check_pub_key_ex() or EVP_PKEY_public_check() to check an X9.42 DH key or X9.42 DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. While DH_check() performs all the necessary checks (as of CVE-2023-3817), DH_check_pub_key() doesn\u0027t make any of these checks, and is therefore vulnerable for excessively large P and Q parameters. Likewise, while DH_generate_key() performs a check for an excessively large P, it doesn\u0027t check for an excessively large Q. An application that calls DH_generate_key() or DH_check_pub_key() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. DH_generate_key() and DH_check_pub_key() are also called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_pub_key_ex(), EVP_PKEY_public_check(), and EVP_PKEY_generate(). Also vulnerable are the OpenSSL pkey command line application when using the \"-pubcheck\" option, as well as the OpenSSL genpkey command line application. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-5678"
    },
    {
      "cve": "CVE-2023-5717",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap out-of-bounds write vulnerability in the Linux kernel\u0027s Linux Kernel Performance Events (perf) component can be exploited to achieve local privilege escalation.\r\n\r\nIf perf_read_group() is called while an event\u0027s sibling_list is smaller than its child\u0027s sibling_list, it can increment or write to memory locations outside of the allocated buffer.\r\n\r\nWe recommend upgrading past commit 32671e3799ca2e4590773fd0e63aaa4229e50c06.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-5717"
    },
    {
      "cve": "CVE-2023-6606",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds read vulnerability was found in smbCalcSize in fs/smb/client/netmisc.c in the Linux Kernel. This issue could allow a local attacker to crash the system or leak internal kernel information.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-6606"
    },
    {
      "cve": "CVE-2023-6931",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap out-of-bounds write vulnerability in the Linux kernel\u0027s Performance Events system component can be exploited to achieve local privilege escalation.\n\nA perf_event\u0027s read_size can overflow, leading to an heap out-of-bounds increment or write in perf_read_group().\n\nWe recommend upgrading past commit 382c27f4ed28f803b1f1473ac2d8db0afc795a1b.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-6931"
    },
    {
      "cve": "CVE-2023-6932",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s ipv4: igmp component can be exploited to achieve local privilege escalation.\n\nA race condition can be exploited to cause a timer be mistakenly registered on a RCU read locked object which is freed by another thread.\n\nWe recommend upgrading past commit e2b706c691905fe78468c361aaabc719d0a496f1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-6932"
    },
    {
      "cve": "CVE-2023-7008",
      "cwe": {
        "id": "CWE-300",
        "name": "Channel Accessible by Non-Endpoint"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in systemd-resolved. This issue may allow systemd-resolved to accept records of DNSSEC-signed domains even when they have no signature, allowing man-in-the-middles (or the upstream DNS resolver) to manipulate records.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-7008"
    },
    {
      "cve": "CVE-2023-7104",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in SQLite SQLite3 up to 3.43.0 and classified as critical. This issue affects the function sessionReadRecord of the file ext/session/sqlite3session.c of the component make alltest Handler. The manipulation leads to heap-based buffer overflow. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-248999.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-7104"
    },
    {
      "cve": "CVE-2023-23454",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "cbq_classify in net/sched/sch_cbq.c in the Linux kernel through 6.1.4 allows attackers to cause a denial of service (slab-out-of-bounds read) because of type confusion (non-negative numbers can sometimes indicate a TC_ACT_SHOT condition rather than valid classification results).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-23454"
    },
    {
      "cve": "CVE-2023-23455",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "atm_tc_enqueue in net/sched/sch_atm.c in the Linux kernel through 6.1.4 allows attackers to cause a denial of service because of type confusion (non-negative numbers can sometimes indicate a TC_ACT_SHOT condition rather than valid classification results).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-23455"
    },
    {
      "cve": "CVE-2023-23559",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In rndis_query_oid in drivers/net/wireless/rndis_wlan.c in the Linux kernel through 6.1.5, there is an integer overflow in an addition.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-23559"
    },
    {
      "cve": "CVE-2023-26607",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel 6.0.8, there is an out-of-bounds read in ntfs_attr_find in fs/ntfs/attrib.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-26607"
    },
    {
      "cve": "CVE-2023-31085",
      "cwe": {
        "id": "CWE-369",
        "name": "Divide By Zero"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in drivers/mtd/ubi/cdev.c in the Linux kernel 6.2. There is a divide-by-zero error in do_div(sz,mtd-\u003eerasesize), used indirectly by ctrl_cdev_ioctl, when mtd-\u003eerasesize is 0.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-31085"
    },
    {
      "cve": "CVE-2023-31436",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "qfq_change_class in net/sched/sch_qfq.c in the Linux kernel before 6.2.13 allows an out-of-bounds write because lmax can exceed QFQ_MIN_LMAX.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-31436"
    },
    {
      "cve": "CVE-2023-32233",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel through 6.3.1, a use-after-free in Netfilter nf_tables when processing batch requests can be abused to perform arbitrary read and write operations on kernel memory. Unprivileged local users can obtain root privileges. This occurs because anonymous sets are mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-32233"
    },
    {
      "cve": "CVE-2023-35001",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Linux Kernel nftables Out-Of-Bounds Read/Write Vulnerability; nft_byteorder poorly handled vm register contents when CAP_NET_ADMIN is in any user or network namespace",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-35001"
    },
    {
      "cve": "CVE-2023-35827",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 6.3.8. A use-after-free was found in ravb_remove in drivers/net/ethernet/renesas/ravb_main.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-35827"
    },
    {
      "cve": "CVE-2023-36660",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The OCB feature in libnettle in Nettle 3.9 before 3.9.1 allows memory corruption.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-36660"
    },
    {
      "cve": "CVE-2023-37453",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the USB subsystem in the Linux kernel through 6.4.2. There is an out-of-bounds and crash in read_descriptors in drivers/usb/core/sysfs.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-37453"
    },
    {
      "cve": "CVE-2023-39189",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The nfnl_osf_add_callback function did not validate the user mode controlled opt_num field. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-39189"
    },
    {
      "cve": "CVE-2023-39192",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The xt_u32 module did not validate the fields in the xt_u32 structure. This flaw allows a local privileged attacker to trigger an out-of-bounds read by setting the size fields with a value beyond the array boundaries, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:H/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-39192"
    },
    {
      "cve": "CVE-2023-39193",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The sctp_mt_check did not validate the flag_count field. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-39193"
    },
    {
      "cve": "CVE-2023-39194",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the XFRM subsystem in the Linux kernel. The specific flaw exists within the processing of state filters, which can result in a read past the end of an allocated buffer. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, potentially leading to an information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.2,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:L/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-39194"
    },
    {
      "cve": "CVE-2023-42753",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An array indexing vulnerability was found in the netfilter subsystem of the Linux kernel. A missing macro could lead to a miscalculation of the `h-\u003enets` array offset, providing attackers with the primitive to arbitrarily increment/decrement a memory buffer out-of-bound. This issue may allow a local user to crash the system or potentially escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-42753"
    },
    {
      "cve": "CVE-2023-42754",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference flaw was found in the Linux kernel ipv4 stack. The socket buffer (skb) was assumed to be associated with a device before calling __ip_options_compile, which is not always the case if the skb is re-routed by ipvs. This issue may allow a local user with CAP_NET_ADMIN privileges to crash the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-42754"
    },
    {
      "cve": "CVE-2023-42755",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the IPv4 Resource Reservation Protocol (RSVP) classifier in the Linux kernel. The xprt pointer may go beyond the linear part of the skb, leading to an out-of-bounds read in the `rsvp_classify` function. This issue may allow a local user to crash the system and cause a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-42755"
    },
    {
      "cve": "CVE-2023-45863",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in lib/kobject.c in the Linux kernel before 6.2.3. With root access, an attacker can trigger a race condition that results in a fill_kobj_path out-of-bounds write.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-45863"
    },
    {
      "cve": "CVE-2023-45871",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in drivers/net/ethernet/intel/igb/igb_main.c in the IGB driver in the Linux kernel before 6.5.3. A buffer size may not be adequate for frames larger than the MTU.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-45871"
    },
    {
      "cve": "CVE-2023-48795",
      "cwe": {
        "id": "CWE-222",
        "name": "Truncation of Security-relevant Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The SSH transport protocol with certain OpenSSH extensions, found in OpenSSH before 9.6 and other products, allows remote attackers to bypass integrity checks such that some packets are omitted (from the extension negotiation message), and a client and server may consequently end up with a connection for which some security features have been downgraded or disabled, aka a Terrapin attack. This occurs because the SSH Binary Packet Protocol (BPP), implemented by these extensions, mishandles the handshake phase and mishandles use of sequence numbers. For example, there is an effective attack against SSH\u0027s use of ChaCha20-Poly1305 (and CBC with Encrypt-then-MAC). The bypass occurs in chacha20-poly1305@openssh.com and (if CBC is used) the -etm@openssh.com MAC algorithms. This also affects Maverick Synergy Java SSH API before 3.1.0-SNAPSHOT, Dropbear through 2022.83, Ssh before 5.1.1 in Erlang/OTP, PuTTY before 0.80, AsyncSSH before 2.14.2, golang.org/x/crypto before 0.17.0, libssh before 0.10.6, libssh2 through 1.11.0, Thorn Tech SFTP Gateway before 3.4.6, Tera Term before 5.1, Paramiko before 3.4.0, jsch before 0.2.15, SFTPGo before 2.5.6, Netgate pfSense Plus through 23.09.1, Netgate pfSense CE through 2.7.2, HPN-SSH through 18.2.0, ProFTPD before 1.3.8b (and before1.3.9rc2), ORYX CycloneSSH before 2.3.4, NetSarang XShell 7 before Build 0144, CrushFTP before 10.6.0, ConnectBot SSH library before 2.2.22, Apache MINA sshd through 2.11.0, sshj through 0.37.0, TinySSH through 20230101, trilead-ssh2 6401, the net-ssh gem 7.2.0 for Ruby, the mscdex ssh2 module before 1.15.0 for Node.js, the thrussh library before 0.35.1 for Rust, and the Russh crate before 0.40.2 for Rust; and there could be effects on Bitvise SSH through 9.31.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-48795"
    },
    {
      "cve": "CVE-2023-50495",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "NCurse v6.4-20230418 was discovered to contain a segmentation fault via the component _nc_wrap_entry().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-50495"
    },
    {
      "cve": "CVE-2023-51384",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In ssh-agent in OpenSSH before 9.6, certain destination constraints can be incompletely applied. When destination constraints are specified during addition of PKCS#11-hosted private keys, these constraints are only applied to the first key, even if a PKCS#11 token returns multiple keys.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-51384"
    },
    {
      "cve": "CVE-2023-51385",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In ssh in OpenSSH before 9.6, OS command injection might occur if a user name or host name has shell metacharacters, and this name is referenced by an expansion token in certain situations. For example, an untrusted Git repository can have a submodule with shell metacharacters in a user name or host name.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-51385"
    },
    {
      "cve": "CVE-2023-51767",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "OpenSSH through 9.6, when common types of DRAM are used, might allow row hammer attacks (for authentication bypass) because the integer value of authenticated in mm_answer_authpassword does not resist flips of a single bit. NOTE: this is applicable to a certain threat model of attacker-victim co-location in which the attacker has user privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-51767"
    },
    {
      "cve": "CVE-2024-0232",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap use-after-free issue has been identified in SQLite in the jsonParseAddNodeArray() function in sqlite3.c. This flaw allows a local attacker to leverage a victim to pass specially crafted malicious input to the application, potentially causing a crash and leading to a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-0232"
    },
    {
      "cve": "CVE-2024-0553",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in GnuTLS. The response times to malformed ciphertexts in RSA-PSK ClientKeyExchange differ from the response times of ciphertexts with correct PKCS#1 v1.5 padding. This issue may allow a remote attacker to perform a timing side-channel attack in the RSA-PSK key exchange, potentially leading to the leakage of sensitive data. CVE-2024-0553 is designated as an incomplete resolution for CVE-2023-5981.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-0553"
    },
    {
      "cve": "CVE-2024-0567",
      "cwe": {
        "id": "CWE-347",
        "name": "Improper Verification of Cryptographic Signature"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in GnuTLS, where a cockpit (which uses gnuTLS) rejects a certificate chain with distributed trust. This issue occurs when validating a certificate chain with cockpit-certificate-ensure. This flaw allows an unauthenticated, remote client or attacker to initiate a denial of service attack.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-0567"
    },
    {
      "cve": "CVE-2024-0584",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free issue was found in igmp_start_timer in net/ipv4/igmp.c in the network sub-component in the Linux Kernel. This flaw allows a local user to observe a refcnt use-after-free issue when receiving an igmp query packet, leading to a kernel information leak.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-0584"
    },
    {
      "cve": "CVE-2024-0684",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the GNU coreutils \"split\" program. A heap overflow with user-controlled data of multiple hundred bytes in length could occur in the line_bytes_split() function, potentially leading to an application crash and denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-0684"
    },
    {
      "cve": "CVE-2024-22365",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "linux-pam (aka Linux PAM) before 1.6.0 allows attackers to cause a denial of service (blocked login process) via mkfifo because the openat call (for protect_dir) lacks O_DIRECTORY.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-22365"
    },
    {
      "cve": "CVE-2024-25062",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.11.7 and 2.12.x before 2.12.5. When using the XML Reader interface with DTD validation and XInclude expansion enabled, processing crafted XML documents can lead to an xmlValidatePopElement use-after-free.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-25062"
    }
  ]
}

{
  "document": {
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited. (TLPv2: TLP:CLEAR)",
      "tlp": {
        "label": "WHITE"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP V1.0.\n\nSiemens has released a new version for SIMATIC S7-1500 TM MFP -\u00a0GNU/Linux subsystem and recommends to update to the latest version.\n\nThis advisory lists vulnerabilities for firmware version V1.0 only; for V1.1 refer to Siemens Security Advisory SSA-265688 (\nhttps://cert-portal.siemens.com/productcert/html/ssa-265688.html).",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "Siemens Security Advisories are subject to the terms and conditions contained in Siemens\u0027 underlying license terms or other applicable agreements previously agreed to with Siemens (hereinafter \"License Terms\"). To the extent applicable to information, software or documentation made available in or through a Siemens Security Advisory, the Terms of Use of Siemens\u0027 Global Website (https://www.siemens.com/terms_of_use, hereinafter \"Terms of Use\"), in particular Sections 8-10 of the Terms of Use, shall apply additionally. In case of conflicts, the License Terms shall prevail over the Terms of Use.",
        "title": "Terms of Use"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "productcert@siemens.com",
      "name": "Siemens ProductCERT",
      "namespace": "https://www.siemens.com"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-794697: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP before V1.1 - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-794697.html"
      },
      {
        "category": "self",
        "summary": "SSA-794697: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP before V1.1 - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-794697.json"
      },
      {
        "category": "self",
        "summary": "SSA-794697: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP before V1.1 - PDF Version",
        "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-794697.pdf"
      },
      {
        "category": "self",
        "summary": "SSA-794697: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP before V1.1 - TXT Version",
        "url": "https://cert-portal.siemens.com/productcert/txt/ssa-794697.txt"
      }
    ],
    "title": "SSA-794697: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP before V1.1",
    "tracking": {
      "current_release_date": "2024-04-09T00:00:00Z",
      "generator": {
        "engine": {
          "name": "Siemens ProductCERT CSAF Generator",
          "version": "1"
        }
      },
      "id": "SSA-794697",
      "initial_release_date": "2023-06-13T00:00:00Z",
      "revision_history": [
        {
          "date": "2023-06-13T00:00:00Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        },
        {
          "date": "2023-07-11T00:00:00Z",
          "legacy_version": "1.1",
          "number": "2",
          "summary": "Added CVE-2022-4269, CVE-2023-3141, CVE-2023-3268, CVE-2023-31436, CVE-2023-32233"
        },
        {
          "date": "2023-08-08T00:00:00Z",
          "legacy_version": "1.2",
          "number": "3",
          "summary": "Added CVE-2023-3446, CVE-2023-3389, CVE-2022-1015, \r\nCVE-2023-3609"
        },
        {
          "date": "2023-09-12T00:00:00Z",
          "legacy_version": "1.3",
          "number": "4",
          "summary": "Added CVE-2023-3338"
        },
        {
          "date": "2023-11-14T00:00:00Z",
          "legacy_version": "1.4",
          "number": "5",
          "summary": "Added CVE-2023-1206, CVE-2023-2898, CVE-2023-3610, CVE-2023-3611, CVE-2023-3772, CVE-2023-3773, CVE-2023-3777, CVE-2023-4004, CVE-2023-4015, CVE-2023-4273, CVE-2023-4623, CVE-2023-4921, CVE-2023-35001, CVE-2023-37453, CVE-2023-39192, CVE-2023-39193, CVE-2023-39194, CVE-2023-42753, CVE-2023-42755"
        },
        {
          "date": "2023-12-12T00:00:00Z",
          "legacy_version": "1.5",
          "number": "6",
          "summary": "Added CVE-2021-44879, CVE-2023-5178, CVE-2023-5197, CVE-2023-5678, CVE-2023-5717, CVE-2023-31085, CVE-2023-35827, CVE-2023-39189, CVE-2023-42754, CVE-2023-45863, CVE-2023-45871"
        },
        {
          "date": "2024-01-09T00:00:00Z",
          "legacy_version": "1.6",
          "number": "7",
          "summary": "Added CVE-2023-48795"
        },
        {
          "date": "2024-02-13T00:00:00Z",
          "legacy_version": "1.7",
          "number": "8",
          "summary": "Added CVE-2020-12762, CVE-2023-6606, CVE-2023-6931, CVE-2023-6932, CVE-2023-7008, CVE-2023-7104, CVE-2023-36660, CVE-2023-50495, CVE-2023-51384, CVE-2023-51385, CVE-2023-51767, CVE-2024-0232, CVE-2024-0553, CVE-2024-0567, CVE-2024-0584, CVE-2024-0684, CVE-2024-22365, CVE-2024-25062"
        },
        {
          "date": "2024-04-09T00:00:00Z",
          "legacy_version": "1.8",
          "number": "9",
          "summary": "Added fix for SIMATIC S7-1500 TM MFP - GNU/Linux subsystem"
        }
      ],
      "status": "interim",
      "version": "9"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV1.1",
                "product": {
                  "name": "SIMATIC S7-1500 TM MFP -\u00a0GNU/Linux subsystem",
                  "product_id": "1"
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 TM MFP -\u00a0GNU/Linux subsystem"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2020-12762",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "json-c through 0.14 has an integer overflow and out-of-bounds write via a large JSON file, as demonstrated by printbuf_memappend.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2020-12762"
    },
    {
      "cve": "CVE-2021-3759",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A memory overflow vulnerability was found in the Linux kernel\u2019s ipc functionality of the memcg subsystem, in the way a user calls the semget function multiple times, creating semaphores. This flaw allows a local user to starve the resources, causing a denial of service. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2021-3759"
    },
    {
      "cve": "CVE-2021-4037",
      "cwe": {
        "id": "CWE-284",
        "name": "Improper Access Control"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in the fs/inode.c:inode_init_owner() function logic of the LInux kernel that allows local users to create files for the XFS file-system with an unintended group ownership and with group execution and SGID permission bits set, in a scenario where a directory is SGID and belongs to a certain group and is writable by a user who is not a member of this group. This can lead to excessive permissions granted in case when they should not. This vulnerability is similar to the previous CVE-2018-13405 and adds the missed fix for the XFS.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2021-4037"
    },
    {
      "cve": "CVE-2021-33655",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When sending malicous data to kernel by ioctl cmd FBIOPUT_VSCREENINFO,kernel will write memory out of bounds.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2021-33655"
    },
    {
      "cve": "CVE-2021-44879",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In gc_data_segment in fs/f2fs/gc.c in the Linux kernel before 5.16.3, special files are not considered, leading to a move_data_page NULL pointer dereference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2021-44879"
    },
    {
      "cve": "CVE-2022-0171",
      "cwe": {
        "id": "CWE-459",
        "name": "Incomplete Cleanup"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel. The existing KVM SEV API has a vulnerability that allows a non-root (host) user-level application to crash the host kernel by creating a confidential guest VM instance in AMD CPU that supports Secure Encrypted Virtualization (SEV).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-0171"
    },
    {
      "cve": "CVE-2022-1012",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A memory leak problem was found in the TCP source port generation algorithm in net/ipv4/tcp.c due to the small table perturb size. This flaw may allow an attacker to information leak and may cause a denial of service problem.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1012"
    },
    {
      "cve": "CVE-2022-1015",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel in linux/net/netfilter/nf_tables_api.c of the netfilter subsystem. This flaw allows a local user to cause an out-of-bounds write issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1015"
    },
    {
      "cve": "CVE-2022-1184",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in fs/ext4/namei.c:dx_insert_block() in the Linux kernel\u2019s filesystem sub-component. This flaw allows a local attacker with a user privilege to cause a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1184"
    },
    {
      "cve": "CVE-2022-1292",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The c_rehash script does not properly sanitise shell metacharacters to prevent command injection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1292"
    },
    {
      "cve": "CVE-2022-1343",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Under certain circumstances, the command line OCSP verify function reports successful verification when the verification in fact failed. In this case the incorrect successful response will also be accompanied by error messages showing the failure and contradicting the apparently successful result.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1343"
    },
    {
      "cve": "CVE-2022-1434",
      "cwe": {
        "id": "CWE-327",
        "name": "Use of a Broken or Risky Cryptographic Algorithm"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When using the RC4-MD5 ciphersuite, which is disabled by default, an attacker is able to modify data in transit due to an incorrect use of the AAD data as the MAC key in OpenSSL 3.0. An attacker is not able to decrypt any communication.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1434"
    },
    {
      "cve": "CVE-2022-1462",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds read flaw was found in the Linux kernel\u2019s TeleTYpe subsystem. The issue occurs in how a user triggers a race condition using ioctls TIOCSPTLCK and TIOCGPTPEER and TIOCSTI and TCXONC with leakage of memory in the flush_to_ldisc function. This flaw allows a local user to crash the system or read unauthorized random data from memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1462"
    },
    {
      "cve": "CVE-2022-1473",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The used OpenSSL version improperly reuses memory when decoding certificates or keys. This can lead to a process termination and Denial of Service for long lived processes.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1473"
    },
    {
      "cve": "CVE-2022-1679",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in the Linux kernel\u2019s Atheros wireless adapter driver in the way a user forces the ath9k_htc_wait_for_target function to fail with some input messages. This flaw allows a local user to crash or potentially escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1679"
    },
    {
      "cve": "CVE-2022-1852",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference flaw was found in the Linux kernel\u2019s KVM module, which can lead to a denial of service in the x86_emulate_insn in arch/x86/kvm/emulate.c. This flaw occurs while executing an illegal instruction in guest in the Intel CPU.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1852"
    },
    {
      "cve": "CVE-2022-1882",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in the Linux kernel\u2019s pipes functionality in how a user performs manipulations with the pipe post_one_notification() after free_pipe_info() that is already called. This flaw allows a local user to crash or potentially escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-1882"
    },
    {
      "cve": "CVE-2022-2068",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In addition to the c_rehash shell command injection identified in CVE-2022-1292, further circumstances where the c_rehash script does not properly sanitise shell metacharacters to prevent command injection were found by code review. When the CVE-2022-1292 was fixed it was not discovered that there are other places in the script where the file names of certificates being hashed were possibly passed to a command executed through the shell. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2068"
    },
    {
      "cve": "CVE-2022-2078",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in the Linux kernel\u0027s nft_set_desc_concat_parse() function .This flaw allows an attacker to trigger a buffer overflow via nft_set_desc_concat_parse() , causing a denial of service and possibly to run code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2078"
    },
    {
      "cve": "CVE-2022-2097",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "AES OCB mode for 32-bit x86 platforms using the AES-NI assembly optimised implementation will not encrypt the entirety of the data under some circumstances. This could reveal sixteen bytes of data that was preexisting in the memory that wasn\u0027t written. In the special case of \"in place\" encryption, sixteen bytes of the plaintext would be revealed. Since OpenSSL does not support OCB based cipher suites for TLS and DTLS, they are both unaffected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2097"
    },
    {
      "cve": "CVE-2022-2153",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel\u2019s KVM when attempting to set a SynIC IRQ. This issue makes it possible for a misbehaving VMM to write to SYNIC/STIMER MSRs, causing a NULL pointer dereference. This flaw allows an unprivileged local attacker on the host to issue specific ioctl calls, causing a kernel oops condition that results in a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2153"
    },
    {
      "cve": "CVE-2022-2274",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The OpenSSL 3.0.4 release introduced a serious bug in the RSA implementation for X86_64 CPUs supporting the AVX512IFMA instructions. This issue makes the RSA implementation with 2048 bit private keys incorrect on such machines and memory corruption will happen during the computation. As a consequence of the memory corruption an attacker may be able to trigger a remote code execution on the machine performing the computation. SSL/TLS servers or other servers using 2048 bit RSA private keys running on machines supporting AVX512IFMA instructions of the X86_64 architecture are affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2274"
    },
    {
      "cve": "CVE-2022-2327",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "io_uring use work_flags to determine which identity need to grab from the calling process to make sure it is consistent with the calling process when executing IORING_OP. Some operations are missing some types, which can lead to incorrect reference counts which can then lead to a double free. We recommend upgrading the kernel past commit df3f3bb5059d20ef094d6b2f0256c4bf4127a859",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2327"
    },
    {
      "cve": "CVE-2022-2503",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Dm-verity is used for extending root-of-trust to root filesystems. LoadPin builds on this property to restrict module/firmware loads to just the trusted root filesystem. Device-mapper table reloads currently allow users with root privileges to switch out the target with an equivalent dm-linear target and bypass verification till reboot. This allows root to bypass LoadPin and can be used to load untrusted and unverified kernel modules and firmware, which implies arbitrary kernel execution and persistence for peripherals that do not verify firmware updates. We recommend upgrading past commit 4caae58406f8ceb741603eee460d79bacca9b1b5",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2503"
    },
    {
      "cve": "CVE-2022-2586",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in nf_tables cross-table in the net/netfilter/nf_tables_api.c function in the Linux kernel. This flaw allows a local, privileged attacker to cause a use-after-free problem at the time of table deletion, possibly leading to local privilege escalation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2586"
    },
    {
      "cve": "CVE-2022-2588",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Zhenpeng Lin discovered that the network packet scheduler implementation in the Linux kernel did not properly remove all references to a route filter before freeing it in some situations. A local attacker could use this to cause a denial of service (system crash) or execute arbitrary code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2588"
    },
    {
      "cve": "CVE-2022-2602",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel. A race issue occurs between an io_uring request and the Unix socket garbage collector, allowing an attacker local privilege escalation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2602"
    },
    {
      "cve": "CVE-2022-2663",
      "cwe": {
        "id": "CWE-923",
        "name": "Improper Restriction of Communication Channel to Intended Endpoints"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was found in the Linux kernel in nf_conntrack_irc where the message handling can be confused and incorrectly matches the message. A firewall may be able to be bypassed when users are using unencrypted IRC with nf_conntrack_irc configured.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2663"
    },
    {
      "cve": "CVE-2022-2905",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds memory read flaw was found in the Linux kernel\u0027s BPF subsystem in how a user calls the bpf_tail_call function with a key larger than the max_entries of the map. This flaw allows a local user to gain unauthorized access to data.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2905"
    },
    {
      "cve": "CVE-2022-2959",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A race condition was found in the Linux kernel\u0027s watch queue due to a missing lock in pipe_resize_ring(). The specific flaw exists within the handling of pipe buffers. The issue results from the lack of proper locking when performing operations on an object. This flaw allows a local user to crash the system or escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2959"
    },
    {
      "cve": "CVE-2022-2978",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw use after free in the Linux kernel NILFS file system was found in the way user triggers function security_inode_alloc to fail with following call to function nilfs_mdt_destroy. A local user could use this flaw to crash the system or potentially escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-2978"
    },
    {
      "cve": "CVE-2022-3028",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A race condition was found in the Linux kernel\u0027s IP framework for transforming packets (XFRM subsystem) when multiple calls to xfrm_probe_algs occurred simultaneously. This flaw could allow a local attacker to potentially trigger an out-of-bounds write or leak kernel heap memory by performing an out-of-bounds read and copying it into a socket.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3028"
    },
    {
      "cve": "CVE-2022-3104",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 5.16-rc6. lkdtm_ARRAY_BOUNDS in drivers/misc/lkdtm/bugs.c lacks check of the return value of kmalloc() and will cause the null pointer dereference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3104"
    },
    {
      "cve": "CVE-2022-3115",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 5.16-rc6. malidp_crtc_reset in drivers/gpu/drm/arm/malidp_crtc.c lacks check of the return value of kzalloc() and will cause the null pointer dereference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3115"
    },
    {
      "cve": "CVE-2022-3169",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel. A denial of service flaw may occur if there is a consecutive request of the NVME_IOCTL_RESET and the NVME_IOCTL_SUBSYS_RESET through the device file of the driver, resulting in a PCIe link disconnect.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3169"
    },
    {
      "cve": "CVE-2022-3303",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A race condition flaw was found in the Linux kernel sound subsystem due to improper locking. It could lead to a NULL pointer dereference while handling the SNDCTL_DSP_SYNC ioctl. A privileged local user (root or member of the audio group) could use this flaw to crash the system, resulting in a denial of service condition",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3303"
    },
    {
      "cve": "CVE-2022-3521",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability has been found in Linux Kernel and classified as problematic. This vulnerability affects the function kcm_tx_work of the file net/kcm/kcmsock.c of the component kcm. The manipulation leads to race condition. It is recommended to apply a patch to fix this issue. VDB-211018 is the identifier assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 2.5,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3521"
    },
    {
      "cve": "CVE-2022-3524",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been declared as problematic. Affected by this vulnerability is the function ipv6_renew_options of the component IPv6 Handler. The manipulation leads to memory leak. The attack can be launched remotely. It is recommended to apply a patch to fix this issue. The identifier VDB-211021 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3524"
    },
    {
      "cve": "CVE-2022-3534",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability classified as critical has been found in Linux Kernel. Affected is the function btf_dump_name_dups of the file tools/lib/bpf/btf_dump.c of the component libbpf. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211032.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3534"
    },
    {
      "cve": "CVE-2022-3545",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability has been found in Linux Kernel and classified as critical. Affected by this vulnerability is the function area_cache_get of the file drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c of the component IPsec. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier VDB-211045 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3545"
    },
    {
      "cve": "CVE-2022-3564",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability classified as critical was found in Linux Kernel. Affected by this vulnerability is the function l2cap_reassemble_sdu of the file net/bluetooth/l2cap_core.c of the component Bluetooth. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-211087.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3564"
    },
    {
      "cve": "CVE-2022-3565",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability, which was classified as critical, has been found in Linux Kernel. Affected by this issue is the function del_timer of the file drivers/isdn/mISDN/l1oip_core.c of the component Bluetooth. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211088.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3565"
    },
    {
      "cve": "CVE-2022-3586",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel\u2019s networking code. A use-after-free was found in the way the sch_sfb enqueue function used the socket buffer (SKB) cb field after the same SKB had been enqueued (and freed) into a child qdisc. This flaw allows a local, unprivileged user to crash the system, causing a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3586"
    },
    {
      "cve": "CVE-2022-3594",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been declared as problematic. Affected by this vulnerability is the function intr_callback of the file drivers/net/usb/r8152.c of the component BPF. The manipulation leads to logging of excessive data. The attack can be launched remotely. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-211363.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3594"
    },
    {
      "cve": "CVE-2022-3606",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been classified as problematic. This affects the function find_prog_by_sec_insn of the file tools/lib/bpf/libbpf.c of the component BPF. The manipulation leads to null pointer dereference. It is recommended to apply a patch to fix this issue. The identifier VDB-211749 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3606"
    },
    {
      "cve": "CVE-2022-3621",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been classified as problematic. Affected is the function nilfs_bmap_lookup_at_level of the file fs/nilfs2/inode.c of the component nilfs2. The manipulation leads to null pointer dereference. It is possible to launch the attack remotely. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211920.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3621"
    },
    {
      "cve": "CVE-2022-3625",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been classified as critical. This affects the function devlink_param_set/devlink_param_get of the file net/core/devlink.c of the component IPsec. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier VDB-211929 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3625"
    },
    {
      "cve": "CVE-2022-3628",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A buffer overflow flaw was found in the Linux kernel Broadcom Full MAC Wi-Fi driver. This issue occurs when a user connects to a malicious USB device. This can allow a local user to crash the system or escalate their privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:P/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3628"
    },
    {
      "cve": "CVE-2022-3629",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been declared as problematic. This vulnerability affects the function vsock_connect of the file net/vmw_vsock/af_vsock.c. The manipulation leads to memory leak. It is recommended to apply a patch to fix this issue. VDB-211930 is the identifier assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3629"
    },
    {
      "cve": "CVE-2022-3633",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability classified as problematic has been found in Linux Kernel. Affected is the function j1939_session_destroy of the file net/can/j1939/transport.c. The manipulation leads to memory leak. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211932.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3633"
    },
    {
      "cve": "CVE-2022-3635",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability, which was classified as critical, has been found in Linux Kernel. Affected by this issue is the function tst_timer of the file drivers/atm/idt77252.c of the component IPsec. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. VDB-211934 is the identifier assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3635"
    },
    {
      "cve": "CVE-2022-3646",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability, which was classified as problematic, has been found in Linux Kernel. This issue affects the function nilfs_attach_log_writer of the file fs/nilfs2/segment.c of the component BPF. The manipulation leads to memory leak. The attack may be initiated remotely. It is recommended to apply a patch to fix this issue. The identifier VDB-211961 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3646"
    },
    {
      "cve": "CVE-2022-3649",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been classified as problematic. Affected is the function nilfs_new_inode of the file fs/nilfs2/inode.c of the component BPF. The manipulation leads to use after free. It is possible to launch the attack remotely. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211992.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-3649"
    },
    {
      "cve": "CVE-2022-4095",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in Linux kernel before 5.19.2. This issue occurs in cmd_hdl_filter in drivers/staging/rtl8712/rtl8712_cmd.c, allowing an attacker to launch a local denial of service attack and gain escalation of privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-4095"
    },
    {
      "cve": "CVE-2022-4129",
      "cwe": {
        "id": "CWE-667",
        "name": "Improper Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel\u0027s Layer 2 Tunneling Protocol (L2TP). A missing lock when clearing sk_user_data can lead to a race condition and NULL pointer dereference. A local user could use this flaw to potentially crash the system causing a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-4129"
    },
    {
      "cve": "CVE-2022-4139",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An incorrect TLB flush issue was found in the Linux kernel\u2019s GPU i915 kernel driver, potentially leading to random memory corruption or data leaks. This flaw could allow a local user to crash the system or escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-4139"
    },
    {
      "cve": "CVE-2022-4269",
      "cwe": {
        "id": "CWE-833",
        "name": "Deadlock"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel Traffic Control (TC) subsystem. Using a specific networking configuration (redirecting egress packets to ingress using TC action \"mirred\") a local unprivileged user could trigger a CPU soft lockup (ABBA deadlock) when the transport protocol in use (TCP or SCTP) does a retransmission, resulting in a denial of service condition.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-4269"
    },
    {
      "cve": "CVE-2022-4304",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful decryption an attacker would have to be able to send a very large number of trial messages for decryption. The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An attacker that had observed a genuine connection between a client and a server could use this flaw to send trial messages to the server and record the time taken to process them. After a sufficiently large number of messages the attacker could recover the pre-master secret used for the original connection and thus be able to decrypt the application data sent over that connection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-4304"
    },
    {
      "cve": "CVE-2022-4450",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the \"name\" (e.g. \"CERTIFICATE\"), any header data and the payload data. If the function succeeds then the \"name_out\", \"header\" and \"data\" arguments are populated with pointers to buffers containing the relevant decoded data. The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate the header argument with a pointer to a buffer that has already been freed. If the caller also frees this buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and therefore these functions are also directly affected. These functions are also called indirectly by a number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file() which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL asn1parse command line application is also impacted by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-4450"
    },
    {
      "cve": "CVE-2022-4662",
      "cwe": {
        "id": "CWE-455",
        "name": "Non-exit on Failed Initialization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw incorrect access control in the Linux kernel USB core subsystem was found in the way user attaches usb device. A local user could use this flaw to crash the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-4662"
    },
    {
      "cve": "CVE-2022-20421",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In binder_inc_ref_for_node of binder.c, there is a possible way to corrupt memory due to a use after free. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-239630375References: Upstream kernel",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-20421"
    },
    {
      "cve": "CVE-2022-20422",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In emulation_proc_handler of armv8_deprecated.c, there is a possible way to corrupt memory due to a race condition. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-237540956References: Upstream kernel",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-20422"
    },
    {
      "cve": "CVE-2022-20566",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In l2cap_chan_put of l2cap_core, there is a possible use after free due to improper locking. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-165329981References: Upstream kernel",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-20566"
    },
    {
      "cve": "CVE-2022-20572",
      "cwe": {
        "id": "CWE-863",
        "name": "Incorrect Authorization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In verity_target of dm-verity-target.c, there is a possible way to modify read-only files due to a missing permission check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-234475629References: Upstream kernel",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-20572"
    },
    {
      "cve": "CVE-2022-21123",
      "cwe": {
        "id": "CWE-459",
        "name": "Incomplete Cleanup"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Incomplete cleanup of multi-core shared buffers for some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-21123"
    },
    {
      "cve": "CVE-2022-21125",
      "cwe": {
        "id": "CWE-459",
        "name": "Incomplete Cleanup"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Incomplete cleanup of microarchitectural fill buffers on some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-21125"
    },
    {
      "cve": "CVE-2022-21166",
      "cwe": {
        "id": "CWE-459",
        "name": "Incomplete Cleanup"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Incomplete cleanup in specific special register write operations for some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-21166"
    },
    {
      "cve": "CVE-2022-21505",
      "cwe": {
        "id": "CWE-305",
        "name": "Authentication Bypass by Primary Weakness"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A bug in the IMA subsystem was discovered which would incorrectly allow kexec to be used when kernel lockdown was enabled",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-21505"
    },
    {
      "cve": "CVE-2022-26373",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Non-transparent sharing of return predictor targets between contexts in some Intel(R) Processors may allow an authorized user to potentially enable information disclosure via local access.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-26373"
    },
    {
      "cve": "CVE-2022-32250",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "net/netfilter/nf_tables_api.c in the Linux kernel through 5.18.1 allows a local user (able to create user/net namespaces) to escalate privileges to root because an incorrect NFT_STATEFUL_EXPR check leads to a use-after-free.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-32250"
    },
    {
      "cve": "CVE-2022-32296",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Linux kernel before 5.17.9 allows TCP servers to identify clients by observing what source ports are used. This occurs because of use of Algorithm 4 (\"Double-Hash Port Selection Algorithm\") of RFC 6056.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-32296"
    },
    {
      "cve": "CVE-2022-34918",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 5.18.9. A type confusion bug in nft_set_elem_init (leading to a buffer overflow) could be used by a local attacker to escalate privileges, a different vulnerability than CVE-2022-32250. (The attacker can obtain root access, but must start with an unprivileged user namespace to obtain CAP_NET_ADMIN access.) This can be fixed in nft_setelem_parse_data in net/netfilter/nf_tables_api.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-34918"
    },
    {
      "cve": "CVE-2022-36123",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Linux kernel before 5.18.13 lacks a certain clear operation for the block starting symbol (.bss). This allows Xen PV guest OS users to cause a denial of service or gain privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-36123"
    },
    {
      "cve": "CVE-2022-36280",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds(OOB) memory access vulnerability was found in vmwgfx driver in drivers/gpu/vmxgfx/vmxgfx_kms.c in GPU component in the Linux kernel with device file \u0027/dev/dri/renderD128 (or Dxxx)\u0027. This flaw allows a local attacker with a user account on the system to gain privilege, causing a denial of service(DoS).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-36280"
    },
    {
      "cve": "CVE-2022-36879",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 5.18.14. xfrm_expand_policies in net/xfrm/xfrm_policy.c can cause a refcount to be dropped twice.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-36879"
    },
    {
      "cve": "CVE-2022-36946",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nfqnl_mangle in net/netfilter/nfnetlink_queue.c in the Linux kernel through 5.18.14 allows remote attackers to cause a denial of service (panic) because, in the case of an nf_queue verdict with a one-byte nfta_payload attribute, an skb_pull can encounter a negative skb-\u003elen.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-36946"
    },
    {
      "cve": "CVE-2022-39188",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in include/asm-generic/tlb.h in the Linux kernel before 5.19. Because of a race condition (unmap_mapping_range versus munmap), a device driver can free a page while it still has stale TLB entries. This only occurs in situations with VM_PFNMAP VMAs.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-39188"
    },
    {
      "cve": "CVE-2022-39190",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in net/netfilter/nf_tables_api.c in the Linux kernel before 5.19.6. A denial of service can occur upon binding to an already bound chain.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-39190"
    },
    {
      "cve": "CVE-2022-40307",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 5.19.8. drivers/firmware/efi/capsule-loader.c has a race condition with a resultant use-after-free.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-40307"
    },
    {
      "cve": "CVE-2022-40768",
      "cwe": {
        "id": "CWE-668",
        "name": "Exposure of Resource to Wrong Sphere"
      },
      "notes": [
        {
          "category": "summary",
          "text": "drivers/scsi/stex.c in the Linux kernel through 5.19.9 allows local users to obtain sensitive information from kernel memory because stex_queuecommand_lck lacks a memset for the PASSTHRU_CMD case.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-40768"
    },
    {
      "cve": "CVE-2022-41218",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In drivers/media/dvb-core/dmxdev.c in the Linux kernel through 5.19.10, there is a use-after-free caused by refcount races, affecting dvb_demux_open and dvb_dmxdev_release.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-41218"
    },
    {
      "cve": "CVE-2022-41222",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "mm/mremap.c in the Linux kernel before 5.13.3 has a use-after-free via a stale TLB because an rmap lock is not held during a PUD move.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-41222"
    },
    {
      "cve": "CVE-2022-41674",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel before 5.19.16. Attackers able to inject WLAN frames could cause a buffer overflow in the ieee80211_bss_info_update function in net/mac80211/scan.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-41674"
    },
    {
      "cve": "CVE-2022-41849",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "drivers/video/fbdev/smscufx.c in the Linux kernel through 5.19.12 has a race condition and resultant use-after-free if a physically proximate attacker removes a USB device while calling open(), aka a race condition between ufx_ops_open and ufx_usb_disconnect.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.2,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:P/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-41849"
    },
    {
      "cve": "CVE-2022-41850",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "roccat_report_event in drivers/hid/hid-roccat.c in the Linux kernel through 5.19.12 has a race condition and resultant use-after-free in certain situations where a report is received while copying a report-\u003evalue is in progress.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-41850"
    },
    {
      "cve": "CVE-2022-42328",
      "cwe": {
        "id": "CWE-667",
        "name": "Improper Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Guests can trigger deadlock in Linux netback driver [This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] The patch for XSA-392 introduced another issue which might result in a deadlock when trying to free the SKB of a packet dropped due to the XSA-392 handling (CVE-2022-42328). Additionally when dropping packages for other reasons the same deadlock could occur in case of netpoll being active for the interface the xen-netback driver is connected to (CVE-2022-42329).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42328"
    },
    {
      "cve": "CVE-2022-42329",
      "cwe": {
        "id": "CWE-667",
        "name": "Improper Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Guests can trigger deadlock in Linux netback drive. The patch for XSA-392 introduced another issue which might result in a deadlock when trying to free the SKB of a packet dropped due to the XSA-392 handling (CVE-2022-42328). Additionally when dropping packages for other reasons the same deadlock could occur in case of netpoll being active for the interface the xen-netback driver is connected to (CVE-2022-42329).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42329"
    },
    {
      "cve": "CVE-2022-42432",
      "cwe": {
        "id": "CWE-457",
        "name": "Use of Uninitialized Variable"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This vulnerability allows local attackers to disclose sensitive information on affected installations of the Linux Kernel 6.0-rc2. An attacker must first obtain the ability to execute high-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the nft_osf_eval function. The issue results from the lack of proper initialization of memory prior to accessing it. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of the kernel. Was ZDI-CAN-18540.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42432"
    },
    {
      "cve": "CVE-2022-42703",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "mm/rmap.c in the Linux kernel before 5.19.7 has a use-after-free related to leaf anon_vma double reuse.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42703"
    },
    {
      "cve": "CVE-2022-42719",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free in the mac80211 stack when parsing a multi-BSSID element in the Linux kernel 5.2 through 5.19.x before 5.19.16 could be used by attackers (able to inject WLAN frames) to crash the kernel and potentially execute code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42719"
    },
    {
      "cve": "CVE-2022-42720",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Various refcounting bugs in the multi-BSS handling in the mac80211 stack in the Linux kernel 5.1 through 5.19.x before 5.19.16 could be used by local attackers (able to inject WLAN frames) to trigger use-after-free conditions to potentially execute code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42720"
    },
    {
      "cve": "CVE-2022-42721",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A list management bug in BSS handling in the mac80211 stack in the Linux kernel 5.1 through 5.19.x before 5.19.16 could be used by local attackers (able to inject WLAN frames) to corrupt a linked list and, in turn, potentially execute code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42721"
    },
    {
      "cve": "CVE-2022-42722",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel 5.8 through 5.19.x before 5.19.16, local attackers able to inject WLAN frames into the mac80211 stack could cause a NULL pointer dereference denial-of-service attack against the beacon protection of P2P devices.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42722"
    },
    {
      "cve": "CVE-2022-42895",
      "cwe": {
        "id": "CWE-824",
        "name": "Access of Uninitialized Pointer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is an infoleak vulnerability in the Linux kernel\u0027s net/bluetooth/l2cap_core.c\u0027s l2cap_parse_conf_req function which can be used to leak kernel pointers remotely. We recommend upgrading past commit https://github.com/torvalds/linux/commit/b1a2cd50c0357f243b7435a732b4e62ba3157a2e",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42895"
    },
    {
      "cve": "CVE-2022-42896",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There are use-after-free vulnerabilities in the Linux kernel\u0027s net/bluetooth/l2cap_core.c\u0027s l2cap_connect and l2cap_le_connect_req functions which may allow code execution and leaking kernel memory (respectively) remotely via Bluetooth. A remote attacker could execute code leaking kernel memory via Bluetooth if within proximity of the victim. We recommend upgrading past commit https://github.com/torvalds/linux/commit/711f8c3fb3db61897080468586b970c87c61d9e4",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-42896"
    },
    {
      "cve": "CVE-2022-43750",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "drivers/usb/mon/mon_bin.c in usbmon in the Linux kernel before 5.19.15 and 6.x before 6.0.1 allows a user-space client to corrupt the monitor\u0027s internal memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-43750"
    },
    {
      "cve": "CVE-2022-47518",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel before 6.0.11. Missing validation of the number of channels in drivers/net/wireless/microchip/wilc1000/cfg80211.c in the WILC1000 wireless driver can trigger a heap-based buffer overflow when copying the list of operating channels from Wi-Fi management frames.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-47518"
    },
    {
      "cve": "CVE-2022-47520",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel before 6.0.11. Missing offset validation in drivers/net/wireless/microchip/wilc1000/hif.c in the WILC1000 wireless driver can trigger an out-of-bounds read when parsing a Robust Security Network (RSN) information element from a Netlink packet.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-47520"
    },
    {
      "cve": "CVE-2022-47929",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel before 6.1.6, a NULL pointer dereference bug in the traffic control subsystem allows an unprivileged user to trigger a denial of service (system crash) via a crafted traffic control configuration that is set up with \"tc qdisc\" and \"tc class\" commands. This affects qdisc_graft in net/sched/sch_api.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-47929"
    },
    {
      "cve": "CVE-2022-47946",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel 5.10.x before 5.10.155. A use-after-free in io_sqpoll_wait_sq in fs/io_uring.c allows an attacker to crash the kernel, resulting in denial of service. finish_wait can be skipped. An attack can occur in some situations by forking a process and then quickly terminating it. NOTE: later kernel versions, such as the 5.15 longterm series, substantially changed the implementation of io_sqpoll_wait_sq.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2022-47946"
    },
    {
      "cve": "CVE-2023-0215",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may also be called directly by end user applications. The function receives a BIO from the caller, prepends a new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid, the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call BIO_pop() on the BIO. This internal function is in turn called by the public API functions PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1, SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL cms and smime command line applications are similarly affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-0215"
    },
    {
      "cve": "CVE-2023-0286",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName. X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these inputs, the other input must already contain an X.400 address as a CRL distribution point, which is uncommon. As such, this vulnerability is most likely to only affect applications which have implemented their own functionality for retrieving CRLs over a network.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-0286"
    },
    {
      "cve": "CVE-2023-0464",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security vulnerability has been identified in all supported versions of OpenSSL related to the verification of X.509 certificate chains that include policy constraints. Attackers may be able to exploit this vulnerability by creating a malicious certificate chain that triggers exponential use of computational resources, leading to a denial-of-service (DoS) attack on affected systems.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing the `-policy` argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-0464"
    },
    {
      "cve": "CVE-2023-0465",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Applications that use a non-default option when verifying certificates may be\r\nvulnerable to an attack from a malicious CA to circumvent certain checks.\r\n\r\nInvalid certificate policies in leaf certificates are silently ignored by\r\nOpenSSL and other certificate policy checks are skipped for that certificate.\r\nA malicious CA could use this to deliberately assert invalid certificate policies\r\nin order to circumvent policy checking on the certificate altogether.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing\r\nthe `-policy` argument to the command line utilities or by calling the\r\n`X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-0465"
    },
    {
      "cve": "CVE-2023-0466",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function X509_VERIFY_PARAM_add0_policy() is documented to\nimplicitly enable the certificate policy check when doing certificate\nverification. However the implementation of the function does not\nenable the check which allows certificates with invalid or incorrect\npolicies to pass the certificate verification.\n\nAs suddenly enabling the policy check could break existing deployments it was\ndecided to keep the existing behavior of the X509_VERIFY_PARAM_add0_policy()\nfunction.\n\nInstead the applications that require OpenSSL to perform certificate\npolicy check need to use X509_VERIFY_PARAM_set1_policies() or explicitly\nenable the policy check by calling X509_VERIFY_PARAM_set_flags() with\nthe X509_V_FLAG_POLICY_CHECK flag argument.\n\nCertificate policy checks are disabled by default in OpenSSL and are not\ncommonly used by applications.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-0466"
    },
    {
      "cve": "CVE-2023-0590",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in qdisc_graft in net/sched/sch_api.c in the Linux Kernel due to a race problem. This flaw leads to a denial of service issue. If patch ebda44da44f6 (\"net: sched: fix race condition in qdisc_graft()\") not applied yet, then kernel could be affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-0590"
    },
    {
      "cve": "CVE-2023-1077",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, pick_next_rt_entity() may return a type confused entry, not detected by the BUG_ON condition, as the confused entry will not be NULL, but list_head.The buggy error condition would lead to a type confused entry with the list head,which would then be used as a type confused sched_rt_entity,causing memory corruption.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-1077"
    },
    {
      "cve": "CVE-2023-1095",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In nf_tables_updtable, if nf_tables_table_enable returns an error, nft_trans_destroy is called to free the transaction object. nft_trans_destroy() calls list_del(), but the transaction was never placed on a list -- the list head is all zeroes, this results in a NULL pointer dereference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-1095"
    },
    {
      "cve": "CVE-2023-1206",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A hash collision flaw was found in the IPv6 connection lookup table in the Linux kernel\u2019s IPv6 functionality when a user makes a new kind of SYN flood attack. A user located in the local network or with a high bandwidth connection can increase the CPU usage of the server that accepts IPV6 connections up to 95%.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-1206"
    },
    {
      "cve": "CVE-2023-2898",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a null-pointer-dereference flaw found in f2fs_write_end_io in fs/f2fs/data.c in the Linux kernel. This flaw allows a local privileged user to cause a denial of service problem.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-2898"
    },
    {
      "cve": "CVE-2023-3141",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in r592_remove in drivers/memstick/host/r592.c in media access in the Linux Kernel. This flaw allows a local attacker to crash the system at device disconnect, possibly leading to a kernel information leak.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-3141"
    },
    {
      "cve": "CVE-2023-3268",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds (OOB) memory access flaw was found in the Linux kernel in relay_file_read_start_pos in kernel/relay.c in the relayfs. This flaw could allow a local attacker to crash the system or leak kernel internal information.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-3268"
    },
    {
      "cve": "CVE-2023-3338",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A null pointer dereference flaw was found in the Linux kernel\u0027s DECnet networking protocol. This issue could allow a remote user to crash the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-3338"
    },
    {
      "cve": "CVE-2023-3389",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux Kernel io_uring subsystem can be exploited to achieve local privilege escalation. Racing a io_uring cancel poll request with a linked timeout can cause a UAF in a hrtimer.\r\n\r\nWe recommend upgrading past commit `ef7dfac51d8ed961b742218f526bd589f3900a59`  \r\n(`4716c73b188566865bdd79c3a6709696a224ac04` for 5.10 stable and   \r\n`0e388fce7aec40992eadee654193cad345d62663` for 5.15 stable).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-3389"
    },
    {
      "cve": "CVE-2023-3446",
      "cwe": {
        "id": "CWE-1333",
        "name": "Inefficient Regular Expression Complexity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus (\u0027p\u0027 parameter) is not too large. Trying to use a very large modulus is slow and OpenSSL will not normally use a modulus which is over 10,000 bits in length. However the DH_check() function checks numerous aspects of the key or parameters that have been supplied. Some of those checks use the supplied modulus value even if it has already been found to be too large. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulernable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \u0027-check\u0027 option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-3446"
    },
    {
      "cve": "CVE-2023-3609",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: cls_u32 component can be exploited to achieve local privilege escalation.\r\n\r\nIf tcf_change_indev() fails, u32_set_parms() will immediately return an error after incrementing or decrementing the reference counter in tcf_bind_filter(). If an attacker can control the reference counter and set it to zero, they can cause the reference to be freed, leading to a use-after-free vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-3609"
    },
    {
      "cve": "CVE-2023-3610",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s netfilter: nf_tables component can be exploited to achieve local privilege escalation.\r\n\r\nFlaw in the error handling of bound chains causes a use-after-free in the abort path of NFT_MSG_NEWRULE. The vulnerability requires CAP_NET_ADMIN to be triggered.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-3610"
    },
    {
      "cve": "CVE-2023-3611",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds write vulnerability in the Linux kernel\u0027s net/sched: sch_qfq component can be exploited to achieve local privilege escalation.\r\n\r\nThe qfq_change_agg() function in net/sched/sch_qfq.c allows an out-of-bounds write because lmax is updated according to packet sizes without bounds checks.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-3611"
    },
    {
      "cve": "CVE-2023-3772",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel\u0027s IP framework for transforming packets (XFRM subsystem). This issue may allow a malicious user with CAP_NET_ADMIN privileges to directly dereference a NULL pointer in xfrm_update_ae_params(), leading to a possible kernel crash and denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-3772"
    },
    {
      "cve": "CVE-2023-3773",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel\u0027s IP framework for transforming packets (XFRM subsystem). This issue may allow a malicious user with CAP_NET_ADMIN privileges to cause a 4 byte out-of-bounds read of XFRMA_MTIMER_THRESH when parsing netlink attributes, leading to potential leakage of sensitive heap data to userspace.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-3773"
    },
    {
      "cve": "CVE-2023-3777",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s netfilter: nf_tables component can be exploited to achieve local privilege escalation.\n\nWhen nf_tables_delrule() is flushing table rules, it is not checked whether the chain is bound and the chain\u0027s owner rule can also release the objects in certain circumstances.\n\nWe recommend upgrading past commit 6eaf41e87a223ae6f8e7a28d6e78384ad7e407f8.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-3777"
    },
    {
      "cve": "CVE-2023-4004",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in the Linux kernel\u0027s netfilter in the way a user triggers the nft_pipapo_remove function with the element, without a NFT_SET_EXT_KEY_END. This issue could allow a local user to crash the system or potentially escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-4004"
    },
    {
      "cve": "CVE-2023-4015",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The netfilter subsystem in the Linux kernel did not properly handle bound chain deactivation in certain circumstances. A local attacker could possibly use this to cause a denial of service (system crash) or execute arbitrary code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-4015"
    },
    {
      "cve": "CVE-2023-4273",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This vulnerability exists in the implementation of the file name reconstruction function, which is responsible for reading file name entries from a directory index and merging file name parts belonging to one file into a single long file name. Since the file name characters are copied into a stack variable, a local privileged attacker could use this vulnerability to overflow the kernel stack.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.0,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-4273"
    },
    {
      "cve": "CVE-2023-4623",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: sch_hfsc (HFSC qdisc traffic control) component can be exploited to achieve local privilege escalation.\n\nIf a class with a link-sharing curve (i.e. with the HFSC_FSC flag set) has a parent without a link-sharing curve, then init_vf() will call vttree_insert() on the parent, but vttree_remove() will be skipped in update_vf(). This leaves a dangling pointer that can cause a use-after-free.\n\nWe recommend upgrading past commit b3d26c5702c7d6c45456326e56d2ccf3f103e60f.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-4623"
    },
    {
      "cve": "CVE-2023-4911",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A buffer overflow was discovered in the GNU C Library\u0027s dynamic loader ld.so while processing the GLIBC_TUNABLES environment variable. This issue could allow a local attacker to use maliciously crafted GLIBC_TUNABLES environment variables when launching binaries with SUID permission to execute code with elevated privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-4911"
    },
    {
      "cve": "CVE-2023-4921",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: sch_qfq component can be exploited to achieve local privilege escalation.\n\nWhen the plug qdisc is used as a class of the qfq qdisc, sending network packets triggers use-after-free in qfq_dequeue() due to the incorrect .peek handler of sch_plug and lack of error checking in agg_dequeue().\n\nWe recommend upgrading past commit 8fc134fee27f2263988ae38920bc03da416b03d8.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-4921"
    },
    {
      "cve": "CVE-2023-5178",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability was found in drivers/nvme/target/tcp.c` in `nvmet_tcp_free_crypto` due to a logical bug in the NVMe-oF/TCP subsystem in the Linux kernel. This issue may allow a malicious local privileged user to cause a use-after-free and double-free problem, which may permit remote code execution or lead to local privilege escalation problem.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-5178"
    },
    {
      "cve": "CVE-2023-5197",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s netfilter: nf_tables component can be exploited to achieve local privilege escalation.\r\n\r\nAddition and removal of rules from chain bindings within the same transaction causes leads to use-after-free.\r\n\r\nWe recommend upgrading past commit f15f29fd4779be8a418b66e9d52979bb6d6c2325.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-5197"
    },
    {
      "cve": "CVE-2023-5678",
      "cwe": {
        "id": "CWE-754",
        "name": "Improper Check for Unusual or Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Generating excessively long X9.42 DH keys or checking excessively long X9.42 DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_generate_key() to generate an X9.42 DH key may experience long delays. Likewise, applications that use DH_check_pub_key(), DH_check_pub_key_ex() or EVP_PKEY_public_check() to check an X9.42 DH key or X9.42 DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. While DH_check() performs all the necessary checks (as of CVE-2023-3817), DH_check_pub_key() doesn\u0027t make any of these checks, and is therefore vulnerable for excessively large P and Q parameters. Likewise, while DH_generate_key() performs a check for an excessively large P, it doesn\u0027t check for an excessively large Q. An application that calls DH_generate_key() or DH_check_pub_key() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. DH_generate_key() and DH_check_pub_key() are also called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_pub_key_ex(), EVP_PKEY_public_check(), and EVP_PKEY_generate(). Also vulnerable are the OpenSSL pkey command line application when using the \"-pubcheck\" option, as well as the OpenSSL genpkey command line application. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-5678"
    },
    {
      "cve": "CVE-2023-5717",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap out-of-bounds write vulnerability in the Linux kernel\u0027s Linux Kernel Performance Events (perf) component can be exploited to achieve local privilege escalation.\r\n\r\nIf perf_read_group() is called while an event\u0027s sibling_list is smaller than its child\u0027s sibling_list, it can increment or write to memory locations outside of the allocated buffer.\r\n\r\nWe recommend upgrading past commit 32671e3799ca2e4590773fd0e63aaa4229e50c06.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-5717"
    },
    {
      "cve": "CVE-2023-6606",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds read vulnerability was found in smbCalcSize in fs/smb/client/netmisc.c in the Linux Kernel. This issue could allow a local attacker to crash the system or leak internal kernel information.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-6606"
    },
    {
      "cve": "CVE-2023-6931",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap out-of-bounds write vulnerability in the Linux kernel\u0027s Performance Events system component can be exploited to achieve local privilege escalation.\n\nA perf_event\u0027s read_size can overflow, leading to an heap out-of-bounds increment or write in perf_read_group().\n\nWe recommend upgrading past commit 382c27f4ed28f803b1f1473ac2d8db0afc795a1b.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-6931"
    },
    {
      "cve": "CVE-2023-6932",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s ipv4: igmp component can be exploited to achieve local privilege escalation.\n\nA race condition can be exploited to cause a timer be mistakenly registered on a RCU read locked object which is freed by another thread.\n\nWe recommend upgrading past commit e2b706c691905fe78468c361aaabc719d0a496f1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-6932"
    },
    {
      "cve": "CVE-2023-7008",
      "cwe": {
        "id": "CWE-300",
        "name": "Channel Accessible by Non-Endpoint"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in systemd-resolved. This issue may allow systemd-resolved to accept records of DNSSEC-signed domains even when they have no signature, allowing man-in-the-middles (or the upstream DNS resolver) to manipulate records.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-7008"
    },
    {
      "cve": "CVE-2023-7104",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in SQLite SQLite3 up to 3.43.0 and classified as critical. This issue affects the function sessionReadRecord of the file ext/session/sqlite3session.c of the component make alltest Handler. The manipulation leads to heap-based buffer overflow. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-248999.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-7104"
    },
    {
      "cve": "CVE-2023-23454",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "cbq_classify in net/sched/sch_cbq.c in the Linux kernel through 6.1.4 allows attackers to cause a denial of service (slab-out-of-bounds read) because of type confusion (non-negative numbers can sometimes indicate a TC_ACT_SHOT condition rather than valid classification results).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-23454"
    },
    {
      "cve": "CVE-2023-23455",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "atm_tc_enqueue in net/sched/sch_atm.c in the Linux kernel through 6.1.4 allows attackers to cause a denial of service because of type confusion (non-negative numbers can sometimes indicate a TC_ACT_SHOT condition rather than valid classification results).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-23455"
    },
    {
      "cve": "CVE-2023-23559",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In rndis_query_oid in drivers/net/wireless/rndis_wlan.c in the Linux kernel through 6.1.5, there is an integer overflow in an addition.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-23559"
    },
    {
      "cve": "CVE-2023-26607",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel 6.0.8, there is an out-of-bounds read in ntfs_attr_find in fs/ntfs/attrib.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-26607"
    },
    {
      "cve": "CVE-2023-31085",
      "cwe": {
        "id": "CWE-369",
        "name": "Divide By Zero"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in drivers/mtd/ubi/cdev.c in the Linux kernel 6.2. There is a divide-by-zero error in do_div(sz,mtd-\u003eerasesize), used indirectly by ctrl_cdev_ioctl, when mtd-\u003eerasesize is 0.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-31085"
    },
    {
      "cve": "CVE-2023-31436",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "qfq_change_class in net/sched/sch_qfq.c in the Linux kernel before 6.2.13 allows an out-of-bounds write because lmax can exceed QFQ_MIN_LMAX.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-31436"
    },
    {
      "cve": "CVE-2023-32233",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel through 6.3.1, a use-after-free in Netfilter nf_tables when processing batch requests can be abused to perform arbitrary read and write operations on kernel memory. Unprivileged local users can obtain root privileges. This occurs because anonymous sets are mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-32233"
    },
    {
      "cve": "CVE-2023-35001",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Linux Kernel nftables Out-Of-Bounds Read/Write Vulnerability; nft_byteorder poorly handled vm register contents when CAP_NET_ADMIN is in any user or network namespace",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-35001"
    },
    {
      "cve": "CVE-2023-35827",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 6.3.8. A use-after-free was found in ravb_remove in drivers/net/ethernet/renesas/ravb_main.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-35827"
    },
    {
      "cve": "CVE-2023-36660",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The OCB feature in libnettle in Nettle 3.9 before 3.9.1 allows memory corruption.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-36660"
    },
    {
      "cve": "CVE-2023-37453",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the USB subsystem in the Linux kernel through 6.4.2. There is an out-of-bounds and crash in read_descriptors in drivers/usb/core/sysfs.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-37453"
    },
    {
      "cve": "CVE-2023-39189",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The nfnl_osf_add_callback function did not validate the user mode controlled opt_num field. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-39189"
    },
    {
      "cve": "CVE-2023-39192",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The xt_u32 module did not validate the fields in the xt_u32 structure. This flaw allows a local privileged attacker to trigger an out-of-bounds read by setting the size fields with a value beyond the array boundaries, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:H/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-39192"
    },
    {
      "cve": "CVE-2023-39193",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The sctp_mt_check did not validate the flag_count field. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-39193"
    },
    {
      "cve": "CVE-2023-39194",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the XFRM subsystem in the Linux kernel. The specific flaw exists within the processing of state filters, which can result in a read past the end of an allocated buffer. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, potentially leading to an information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.2,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:L/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-39194"
    },
    {
      "cve": "CVE-2023-42753",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An array indexing vulnerability was found in the netfilter subsystem of the Linux kernel. A missing macro could lead to a miscalculation of the `h-\u003enets` array offset, providing attackers with the primitive to arbitrarily increment/decrement a memory buffer out-of-bound. This issue may allow a local user to crash the system or potentially escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-42753"
    },
    {
      "cve": "CVE-2023-42754",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference flaw was found in the Linux kernel ipv4 stack. The socket buffer (skb) was assumed to be associated with a device before calling __ip_options_compile, which is not always the case if the skb is re-routed by ipvs. This issue may allow a local user with CAP_NET_ADMIN privileges to crash the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-42754"
    },
    {
      "cve": "CVE-2023-42755",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the IPv4 Resource Reservation Protocol (RSVP) classifier in the Linux kernel. The xprt pointer may go beyond the linear part of the skb, leading to an out-of-bounds read in the `rsvp_classify` function. This issue may allow a local user to crash the system and cause a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-42755"
    },
    {
      "cve": "CVE-2023-45863",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in lib/kobject.c in the Linux kernel before 6.2.3. With root access, an attacker can trigger a race condition that results in a fill_kobj_path out-of-bounds write.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-45863"
    },
    {
      "cve": "CVE-2023-45871",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in drivers/net/ethernet/intel/igb/igb_main.c in the IGB driver in the Linux kernel before 6.5.3. A buffer size may not be adequate for frames larger than the MTU.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-45871"
    },
    {
      "cve": "CVE-2023-48795",
      "cwe": {
        "id": "CWE-222",
        "name": "Truncation of Security-relevant Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The SSH transport protocol with certain OpenSSH extensions, found in OpenSSH before 9.6 and other products, allows remote attackers to bypass integrity checks such that some packets are omitted (from the extension negotiation message), and a client and server may consequently end up with a connection for which some security features have been downgraded or disabled, aka a Terrapin attack. This occurs because the SSH Binary Packet Protocol (BPP), implemented by these extensions, mishandles the handshake phase and mishandles use of sequence numbers. For example, there is an effective attack against SSH\u0027s use of ChaCha20-Poly1305 (and CBC with Encrypt-then-MAC). The bypass occurs in chacha20-poly1305@openssh.com and (if CBC is used) the -etm@openssh.com MAC algorithms. This also affects Maverick Synergy Java SSH API before 3.1.0-SNAPSHOT, Dropbear through 2022.83, Ssh before 5.1.1 in Erlang/OTP, PuTTY before 0.80, AsyncSSH before 2.14.2, golang.org/x/crypto before 0.17.0, libssh before 0.10.6, libssh2 through 1.11.0, Thorn Tech SFTP Gateway before 3.4.6, Tera Term before 5.1, Paramiko before 3.4.0, jsch before 0.2.15, SFTPGo before 2.5.6, Netgate pfSense Plus through 23.09.1, Netgate pfSense CE through 2.7.2, HPN-SSH through 18.2.0, ProFTPD before 1.3.8b (and before1.3.9rc2), ORYX CycloneSSH before 2.3.4, NetSarang XShell 7 before Build 0144, CrushFTP before 10.6.0, ConnectBot SSH library before 2.2.22, Apache MINA sshd through 2.11.0, sshj through 0.37.0, TinySSH through 20230101, trilead-ssh2 6401, the net-ssh gem 7.2.0 for Ruby, the mscdex ssh2 module before 1.15.0 for Node.js, the thrussh library before 0.35.1 for Rust, and the Russh crate before 0.40.2 for Rust; and there could be effects on Bitvise SSH through 9.31.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-48795"
    },
    {
      "cve": "CVE-2023-50495",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "NCurse v6.4-20230418 was discovered to contain a segmentation fault via the component _nc_wrap_entry().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-50495"
    },
    {
      "cve": "CVE-2023-51384",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In ssh-agent in OpenSSH before 9.6, certain destination constraints can be incompletely applied. When destination constraints are specified during addition of PKCS#11-hosted private keys, these constraints are only applied to the first key, even if a PKCS#11 token returns multiple keys.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-51384"
    },
    {
      "cve": "CVE-2023-51385",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In ssh in OpenSSH before 9.6, OS command injection might occur if a user name or host name has shell metacharacters, and this name is referenced by an expansion token in certain situations. For example, an untrusted Git repository can have a submodule with shell metacharacters in a user name or host name.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-51385"
    },
    {
      "cve": "CVE-2023-51767",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "OpenSSH through 9.6, when common types of DRAM are used, might allow row hammer attacks (for authentication bypass) because the integer value of authenticated in mm_answer_authpassword does not resist flips of a single bit. NOTE: this is applicable to a certain threat model of attacker-victim co-location in which the attacker has user privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2023-51767"
    },
    {
      "cve": "CVE-2024-0232",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap use-after-free issue has been identified in SQLite in the jsonParseAddNodeArray() function in sqlite3.c. This flaw allows a local attacker to leverage a victim to pass specially crafted malicious input to the application, potentially causing a crash and leading to a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-0232"
    },
    {
      "cve": "CVE-2024-0553",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in GnuTLS. The response times to malformed ciphertexts in RSA-PSK ClientKeyExchange differ from the response times of ciphertexts with correct PKCS#1 v1.5 padding. This issue may allow a remote attacker to perform a timing side-channel attack in the RSA-PSK key exchange, potentially leading to the leakage of sensitive data. CVE-2024-0553 is designated as an incomplete resolution for CVE-2023-5981.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-0553"
    },
    {
      "cve": "CVE-2024-0567",
      "cwe": {
        "id": "CWE-347",
        "name": "Improper Verification of Cryptographic Signature"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in GnuTLS, where a cockpit (which uses gnuTLS) rejects a certificate chain with distributed trust. This issue occurs when validating a certificate chain with cockpit-certificate-ensure. This flaw allows an unauthenticated, remote client or attacker to initiate a denial of service attack.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-0567"
    },
    {
      "cve": "CVE-2024-0584",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free issue was found in igmp_start_timer in net/ipv4/igmp.c in the network sub-component in the Linux Kernel. This flaw allows a local user to observe a refcnt use-after-free issue when receiving an igmp query packet, leading to a kernel information leak.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-0584"
    },
    {
      "cve": "CVE-2024-0684",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the GNU coreutils \"split\" program. A heap overflow with user-controlled data of multiple hundred bytes in length could occur in the line_bytes_split() function, potentially leading to an application crash and denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-0684"
    },
    {
      "cve": "CVE-2024-22365",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "linux-pam (aka Linux PAM) before 1.6.0 allows attackers to cause a denial of service (blocked login process) via mkfifo because the openat call (for protect_dir) lacks O_DIRECTORY.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-22365"
    },
    {
      "cve": "CVE-2024-25062",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.11.7 and 2.12.x before 2.12.5. When using the XML Reader interface with DTD validation and XInclude expansion enabled, processing crafted XML documents can lead to an xmlValidatePopElement use-after-free.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "1"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1"
          ]
        }
      ],
      "title": "CVE-2024-25062"
    }
  ]
}