CVE-2026-93185 (GCVE-0-2026-93185)
Vulnerability from cvelistv5 – Published: 2026-09-17 16:12 – Updated: 2026-09-17 16:12
VLAI
EPSS
VEX
Title
ASoC: rt700-sdw: always drain jack work on remove
Summary
In the Linux kernel, the following vulnerability has been resolved:
ASoC: rt700-sdw: always drain jack work on remove
rt700_sdw_remove() drains jack_detect_work and jack_btn_check_work only
when rt700->hw_init is true. That state bit is cleared by
rt700_update_status() when the SoundWire slave becomes UNATTACHED, but a
jack work item can already have been queued by rt700_interrupt_callback()
or rt700_jack_init() while the device was initialized.
Do not use hw_init as the remove-time guard for draining these work
objects. The delayed works are initialized during rt700_init(), so remove
can cancel them unconditionally and pair the object lifetime with the
codec-private data lifetime instead of a mutable hardware state bit.
This issue was found by our static analysis tool and then confirmed by
manual review of the SoundWire status, interrupt and remove paths. The
remove path should drain work based on whether the work object exists, not
on a runtime hardware state bit that can change after the work was queued.
A QEMU PoC queued jack_detect_work, simulated SDW_SLAVE_UNATTACHED, and
then entered remove. DEBUG_OBJECTS reported an active timer/work object
associated with the rt700 jack work path after remove skipped the cancel.
This is sent as an RFC because the practical trigger depends on SoundWire
core remove ordering after an UNATTACHED status update. If remove cannot
run after hw_init has been cleared while jack work is still pending, this
is a defensive lifecycle cleanup rather than a reachable race on current
systems.
Severity
No CVSS data available.
Assigner
References
7 references
Impacted products
2 products
| Vendor | Product | Version | CPE status | |
|---|---|---|---|---|
| Linux | Linux |
Affected:
737ee8bdf682cedb3c42b713d20ffa5c899591fb , < f1e21b7b977f5ae2955ecf3ab144da2578a4fe00
(git)
Affected: 737ee8bdf682cedb3c42b713d20ffa5c899591fb , < b81c2131dbb6fe04e27841bc719977c106177c61 (git) Affected: 737ee8bdf682cedb3c42b713d20ffa5c899591fb , < 1bb23c9d68312e77cec81bdfb2cc385e2d2960f7 (git) Affected: 737ee8bdf682cedb3c42b713d20ffa5c899591fb , < 45fcf435ffcc5f61a43bd9b19094dc52de6cbc05 (git) Affected: 737ee8bdf682cedb3c42b713d20ffa5c899591fb , < 1e8fddab6cbe536dd02e61205e4b9bf97df6479b (git) Affected: 737ee8bdf682cedb3c42b713d20ffa5c899591fb , < a47f087877bb2bc57c3ccb714fc49abf45d28e12 (git) Affected: 737ee8bdf682cedb3c42b713d20ffa5c899591fb , < 612ccf42acd14bb2685fa60c3495ca13e63e8989 (git) |
guessed | |
| Linux | Linux |
Affected:
5.12
Unaffected: 0 , < 5.12 (semver) Unaffected: 5.15.221 , ≤ 5.15.* (semver) Unaffected: 6.1.188 , ≤ 6.1.* (semver) Unaffected: 6.6.157 , ≤ 6.6.* (semver) Unaffected: 6.12.110 , ≤ 6.12.* (semver) Unaffected: 6.18.52 , ≤ 6.18.* (semver) Unaffected: 7.2.6 , ≤ 7.2.* (semver) Unaffected: 7.3-rc1 , ≤ * (original_commit_for_fix) |
guessed |
{
"containers": {
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"sound/soc/codecs/rt700-sdw.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "f1e21b7b977f5ae2955ecf3ab144da2578a4fe00",
"status": "affected",
"version": "737ee8bdf682cedb3c42b713d20ffa5c899591fb",
"versionType": "git"
},
{
"lessThan": "b81c2131dbb6fe04e27841bc719977c106177c61",
"status": "affected",
"version": "737ee8bdf682cedb3c42b713d20ffa5c899591fb",
"versionType": "git"
},
{
"lessThan": "1bb23c9d68312e77cec81bdfb2cc385e2d2960f7",
"status": "affected",
"version": "737ee8bdf682cedb3c42b713d20ffa5c899591fb",
"versionType": "git"
},
{
"lessThan": "45fcf435ffcc5f61a43bd9b19094dc52de6cbc05",
"status": "affected",
"version": "737ee8bdf682cedb3c42b713d20ffa5c899591fb",
"versionType": "git"
},
{
"lessThan": "1e8fddab6cbe536dd02e61205e4b9bf97df6479b",
"status": "affected",
"version": "737ee8bdf682cedb3c42b713d20ffa5c899591fb",
"versionType": "git"
},
{
"lessThan": "a47f087877bb2bc57c3ccb714fc49abf45d28e12",
"status": "affected",
"version": "737ee8bdf682cedb3c42b713d20ffa5c899591fb",
"versionType": "git"
},
{
"lessThan": "612ccf42acd14bb2685fa60c3495ca13e63e8989",
"status": "affected",
"version": "737ee8bdf682cedb3c42b713d20ffa5c899591fb",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"sound/soc/codecs/rt700-sdw.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "5.12"
},
{
"lessThan": "5.12",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.221",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.188",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.157",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.110",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.52",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.2.*",
"status": "unaffected",
"version": "7.2.6",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.3-rc1",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.15.221",
"versionStartIncluding": "5.12",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.188",
"versionStartIncluding": "5.12",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.157",
"versionStartIncluding": "5.12",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.110",
"versionStartIncluding": "5.12",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.52",
"versionStartIncluding": "5.12",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.2.6",
"versionStartIncluding": "5.12",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.3-rc1",
"versionStartIncluding": "5.12",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nASoC: rt700-sdw: always drain jack work on remove\n\nrt700_sdw_remove() drains jack_detect_work and jack_btn_check_work only\nwhen rt700-\u003ehw_init is true. That state bit is cleared by\nrt700_update_status() when the SoundWire slave becomes UNATTACHED, but a\njack work item can already have been queued by rt700_interrupt_callback()\nor rt700_jack_init() while the device was initialized.\n\nDo not use hw_init as the remove-time guard for draining these work\nobjects. The delayed works are initialized during rt700_init(), so remove\ncan cancel them unconditionally and pair the object lifetime with the\ncodec-private data lifetime instead of a mutable hardware state bit.\n\nThis issue was found by our static analysis tool and then confirmed by\nmanual review of the SoundWire status, interrupt and remove paths. The\nremove path should drain work based on whether the work object exists, not\non a runtime hardware state bit that can change after the work was queued.\n\nA QEMU PoC queued jack_detect_work, simulated SDW_SLAVE_UNATTACHED, and\nthen entered remove. DEBUG_OBJECTS reported an active timer/work object\nassociated with the rt700 jack work path after remove skipped the cancel.\n\nThis is sent as an RFC because the practical trigger depends on SoundWire\ncore remove ordering after an UNATTACHED status update. If remove cannot\nrun after hw_init has been cleared while jack work is still pending, this\nis a defensive lifecycle cleanup rather than a reachable race on current\nsystems."
}
],
"providerMetadata": {
"dateUpdated": "2026-09-17T16:12:11.454Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/f1e21b7b977f5ae2955ecf3ab144da2578a4fe00"
},
{
"url": "https://git.kernel.org/stable/c/b81c2131dbb6fe04e27841bc719977c106177c61"
},
{
"url": "https://git.kernel.org/stable/c/1bb23c9d68312e77cec81bdfb2cc385e2d2960f7"
},
{
"url": "https://git.kernel.org/stable/c/45fcf435ffcc5f61a43bd9b19094dc52de6cbc05"
},
{
"url": "https://git.kernel.org/stable/c/1e8fddab6cbe536dd02e61205e4b9bf97df6479b"
},
{
"url": "https://git.kernel.org/stable/c/a47f087877bb2bc57c3ccb714fc49abf45d28e12"
},
{
"url": "https://git.kernel.org/stable/c/612ccf42acd14bb2685fa60c3495ca13e63e8989"
}
],
"title": "ASoC: rt700-sdw: always drain jack work on remove",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2026-93185",
"datePublished": "2026-09-17T16:12:11.454Z",
"dateReserved": "2026-09-17T16:02:15.091Z",
"dateUpdated": "2026-09-17T16:12:11.454Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2",
"vulnerability-lookup:meta": {
"nvd": "{\"cve\":{\"id\":\"CVE-2026-93185\",\"sourceIdentifier\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\",\"published\":\"2026-09-17T17:18:14.547\",\"lastModified\":\"2026-09-17T17:18:14.547\",\"vulnStatus\":\"Received\",\"cveTags\":[],\"descriptions\":[{\"lang\":\"en\",\"value\":\"In the Linux kernel, the following vulnerability has been resolved:\\n\\nASoC: rt700-sdw: always drain jack work on remove\\n\\nrt700_sdw_remove() drains jack_detect_work and jack_btn_check_work only\\nwhen rt700-\u003ehw_init is true. That state bit is cleared by\\nrt700_update_status() when the SoundWire slave becomes UNATTACHED, but a\\njack work item can already have been queued by rt700_interrupt_callback()\\nor rt700_jack_init() while the device was initialized.\\n\\nDo not use hw_init as the remove-time guard for draining these work\\nobjects. The delayed works are initialized during rt700_init(), so remove\\ncan cancel them unconditionally and pair the object lifetime with the\\ncodec-private data lifetime instead of a mutable hardware state bit.\\n\\nThis issue was found by our static analysis tool and then confirmed by\\nmanual review of the SoundWire status, interrupt and remove paths. The\\nremove path should drain work based on whether the work object exists, not\\non a runtime hardware state bit that can change after the work was queued.\\n\\nA QEMU PoC queued jack_detect_work, simulated SDW_SLAVE_UNATTACHED, and\\nthen entered remove. DEBUG_OBJECTS reported an active timer/work object\\nassociated with the rt700 jack work path after remove skipped the cancel.\\n\\nThis is sent as an RFC because the practical trigger depends on SoundWire\\ncore remove ordering after an UNATTACHED status update. If remove cannot\\nrun after hw_init has been cleared while jack work is still pending, this\\nis a defensive lifecycle cleanup rather than a reachable race on current\\nsystems.\"}],\"affected\":[{\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\",\"affectedData\":[{\"vendor\":\"Linux\",\"product\":\"Linux\",\"defaultStatus\":\"unaffected\",\"programFiles\":[\"sound/soc/codecs/rt700-sdw.c\"],\"repo\":\"https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git\",\"versions\":[{\"version\":\"737ee8bdf682cedb3c42b713d20ffa5c899591fb\",\"lessThan\":\"f1e21b7b977f5ae2955ecf3ab144da2578a4fe00\",\"versionType\":\"git\",\"status\":\"affected\"},{\"version\":\"737ee8bdf682cedb3c42b713d20ffa5c899591fb\",\"lessThan\":\"b81c2131dbb6fe04e27841bc719977c106177c61\",\"versionType\":\"git\",\"status\":\"affected\"},{\"version\":\"737ee8bdf682cedb3c42b713d20ffa5c899591fb\",\"lessThan\":\"1bb23c9d68312e77cec81bdfb2cc385e2d2960f7\",\"versionType\":\"git\",\"status\":\"affected\"},{\"version\":\"737ee8bdf682cedb3c42b713d20ffa5c899591fb\",\"lessThan\":\"45fcf435ffcc5f61a43bd9b19094dc52de6cbc05\",\"versionType\":\"git\",\"status\":\"affected\"},{\"version\":\"737ee8bdf682cedb3c42b713d20ffa5c899591fb\",\"lessThan\":\"1e8fddab6cbe536dd02e61205e4b9bf97df6479b\",\"versionType\":\"git\",\"status\":\"affected\"},{\"version\":\"737ee8bdf682cedb3c42b713d20ffa5c899591fb\",\"lessThan\":\"a47f087877bb2bc57c3ccb714fc49abf45d28e12\",\"versionType\":\"git\",\"status\":\"affected\"},{\"version\":\"737ee8bdf682cedb3c42b713d20ffa5c899591fb\",\"lessThan\":\"612ccf42acd14bb2685fa60c3495ca13e63e8989\",\"versionType\":\"git\",\"status\":\"affected\"}]},{\"vendor\":\"Linux\",\"product\":\"Linux\",\"defaultStatus\":\"affected\",\"programFiles\":[\"sound/soc/codecs/rt700-sdw.c\"],\"repo\":\"https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git\",\"versions\":[{\"version\":\"5.12\",\"status\":\"affected\"},{\"version\":\"0\",\"lessThan\":\"5.12\",\"versionType\":\"semver\",\"status\":\"unaffected\"},{\"version\":\"5.15.221\",\"lessThanOrEqual\":\"5.15.*\",\"versionType\":\"semver\",\"status\":\"unaffected\"},{\"version\":\"6.1.188\",\"lessThanOrEqual\":\"6.1.*\",\"versionType\":\"semver\",\"status\":\"unaffected\"},{\"version\":\"6.6.157\",\"lessThanOrEqual\":\"6.6.*\",\"versionType\":\"semver\",\"status\":\"unaffected\"},{\"version\":\"6.12.110\",\"lessThanOrEqual\":\"6.12.*\",\"versionType\":\"semver\",\"status\":\"unaffected\"},{\"version\":\"6.18.52\",\"lessThanOrEqual\":\"6.18.*\",\"versionType\":\"semver\",\"status\":\"unaffected\"},{\"version\":\"7.2.6\",\"lessThanOrEqual\":\"7.2.*\",\"versionType\":\"semver\",\"status\":\"unaffected\"},{\"version\":\"7.3-rc1\",\"lessThanOrEqual\":\"*\",\"versionType\":\"original_commit_for_fix\",\"status\":\"unaffected\"}]}]}],\"metrics\":{},\"references\":[{\"url\":\"https://git.kernel.org/stable/c/1bb23c9d68312e77cec81bdfb2cc385e2d2960f7\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\"},{\"url\":\"https://git.kernel.org/stable/c/1e8fddab6cbe536dd02e61205e4b9bf97df6479b\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\"},{\"url\":\"https://git.kernel.org/stable/c/45fcf435ffcc5f61a43bd9b19094dc52de6cbc05\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\"},{\"url\":\"https://git.kernel.org/stable/c/612ccf42acd14bb2685fa60c3495ca13e63e8989\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\"},{\"url\":\"https://git.kernel.org/stable/c/a47f087877bb2bc57c3ccb714fc49abf45d28e12\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\"},{\"url\":\"https://git.kernel.org/stable/c/b81c2131dbb6fe04e27841bc719977c106177c61\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\"},{\"url\":\"https://git.kernel.org/stable/c/f1e21b7b977f5ae2955ecf3ab144da2578a4fe00\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\"}]}}",
"suse_vex": {
"aggregate_severity": "not set",
"current_release_date": "2026-09-18T00:11:06Z",
"cve": "CVE-2026-93185",
"id": "CVE-2026-93185",
"initial_release_date": "2026-09-18T00:11:06Z",
"source": "SUSE CSAF VEX",
"status": "interim",
"title": "SUSE CVE CVE-2026-93185",
"url": "https://ftp.suse.com/pub/projects/security/csaf-vex/cve-2026-93185.json",
"version": "2"
}
}
}
Loading…
Loading…
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Loading…
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.
Loading…