CVE-2026-97481 (GCVE-0-2026-97481)

Vulnerability from cvelistv5 – Published: 2026-09-24 16:04 – Updated: 2026-09-24 16:04
VLAI
Title
serial: 8250: fix possible ISR soft lockup
Summary
In the Linux kernel, the following vulnerability has been resolved: serial: 8250: fix possible ISR soft lockup There are rare cases in which the host gets stuck in the ISR because it is flooded with messages during the startup phase. The reason for the soft lockup in the ISR is the missing FIFO error IRQ (FIFOE) handling. Not handling it and reporting IRQ_HANDLED triggers the IRQ immediately again. Fix this by adding a check for the FIFOE status and clearing the FIFO if no data is ready (DR). This behavior was observed on an AM62L device which uses the OMAP 8250 driver. Fix it for all 8250 drivers, since the OMAP driver's special IRQ setup handling may trigger this behavior more frequently, but it is not ensured that other 8250 drivers aren't affected.
Severity
No CVSS data available.
Impacted products
Vendor Product Version CPE status
Linux Linux Affected: 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 , < 2881b2e6da02daea1eb8254247ba8fd20c9d3348 (git)
Affected: 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 , < 4295c58990b7a84e8349a2226db692e252825b60 (git)
Affected: 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 , < 0c6bf45e5a345cc3b9ffbeaf9083ecac3c2293eb (git)
Affected: 0 , < 6.12.111 (semver)
Affected: 0 , < 6.18.53 (semver)
guessed Create a notification for this product.
Linux Linux Unaffected: 6.12.111 , ≤ 6.12.* (semver)
Unaffected: 6.18.53 , ≤ 6.18.* (semver)
Unaffected: 7.2 , ≤ * (original_commit_for_fix)
guessed Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "drivers/tty/serial/8250/8250_port.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "2881b2e6da02daea1eb8254247ba8fd20c9d3348",
              "status": "affected",
              "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
              "versionType": "git"
            },
            {
              "lessThan": "4295c58990b7a84e8349a2226db692e252825b60",
              "status": "affected",
              "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
              "versionType": "git"
            },
            {
              "lessThan": "0c6bf45e5a345cc3b9ffbeaf9083ecac3c2293eb",
              "status": "affected",
              "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
              "versionType": "git"
            },
            {
              "lessThan": "6.12.111",
              "status": "affected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThan": "6.18.53",
              "status": "affected",
              "version": "0",
              "versionType": "semver"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "drivers/tty/serial/8250/8250_port.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThanOrEqual": "6.12.*",
              "status": "unaffected",
              "version": "6.12.111",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.18.*",
              "status": "unaffected",
              "version": "6.18.53",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "7.2",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.12.111",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.18.53",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.2",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nserial: 8250: fix possible ISR soft lockup\n\nThere are rare cases in which the host gets stuck in the ISR because it\nis flooded with messages during the startup phase.\n\nThe reason for the soft lockup in the ISR is the missing FIFO error IRQ\n(FIFOE) handling. Not handling it and reporting IRQ_HANDLED triggers\nthe IRQ immediately again.\n\nFix this by adding a check for the FIFOE status and clearing the FIFO\nif no data is ready (DR).\n\nThis behavior was observed on an AM62L device which uses the OMAP 8250\ndriver. Fix it for all 8250 drivers, since the OMAP driver\u0027s special\nIRQ setup handling may trigger this behavior more frequently, but it\nis not ensured that other 8250 drivers aren\u0027t affected."
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-09-24T16:04:23.958Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/2881b2e6da02daea1eb8254247ba8fd20c9d3348"
        },
        {
          "url": "https://git.kernel.org/stable/c/4295c58990b7a84e8349a2226db692e252825b60"
        },
        {
          "url": "https://git.kernel.org/stable/c/0c6bf45e5a345cc3b9ffbeaf9083ecac3c2293eb"
        }
      ],
      "title": "serial: 8250: fix possible ISR soft lockup",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2026-97481",
    "datePublished": "2026-09-24T16:04:23.958Z",
    "dateReserved": "2026-09-24T16:01:01.149Z",
    "dateUpdated": "2026-09-24T16:04:23.958Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2",
  "vulnerability-lookup:meta": {
    "epss": {
      "cve": "CVE-2026-97481",
      "date": "2026-09-25",
      "epss": "0.00166",
      "percentile": "0.05189"
    },
    "nvd": {
      "cve": {
        "affected": [
          {
            "affectedData": [
              {
                "defaultStatus": "unaffected",
                "product": "Linux",
                "programFiles": [
                  "drivers/tty/serial/8250/8250_port.c"
                ],
                "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
                "vendor": "Linux",
                "versions": [
                  {
                    "lessThan": "2881b2e6da02daea1eb8254247ba8fd20c9d3348",
                    "status": "affected",
                    "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "4295c58990b7a84e8349a2226db692e252825b60",
                    "status": "affected",
                    "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "0c6bf45e5a345cc3b9ffbeaf9083ecac3c2293eb",
                    "status": "affected",
                    "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "6.12.111",
                    "status": "affected",
                    "version": "0",
                    "versionType": "semver"
                  },
                  {
                    "lessThan": "6.18.53",
                    "status": "affected",
                    "version": "0",
                    "versionType": "semver"
                  }
                ]
              },
              {
                "defaultStatus": "affected",
                "product": "Linux",
                "programFiles": [
                  "drivers/tty/serial/8250/8250_port.c"
                ],
                "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
                "vendor": "Linux",
                "versions": [
                  {
                    "lessThanOrEqual": "6.12.*",
                    "status": "unaffected",
                    "version": "6.12.111",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "6.18.*",
                    "status": "unaffected",
                    "version": "6.18.53",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "*",
                    "status": "unaffected",
                    "version": "7.2",
                    "versionType": "original_commit_for_fix"
                  }
                ]
              }
            ],
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
          }
        ],
        "cveTags": [],
        "descriptions": [
          {
            "lang": "en",
            "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nserial: 8250: fix possible ISR soft lockup\n\nThere are rare cases in which the host gets stuck in the ISR because it\nis flooded with messages during the startup phase.\n\nThe reason for the soft lockup in the ISR is the missing FIFO error IRQ\n(FIFOE) handling. Not handling it and reporting IRQ_HANDLED triggers\nthe IRQ immediately again.\n\nFix this by adding a check for the FIFOE status and clearing the FIFO\nif no data is ready (DR).\n\nThis behavior was observed on an AM62L device which uses the OMAP 8250\ndriver. Fix it for all 8250 drivers, since the OMAP driver\u0027s special\nIRQ setup handling may trigger this behavior more frequently, but it\nis not ensured that other 8250 drivers aren\u0027t affected."
          }
        ],
        "id": "CVE-2026-97481",
        "lastModified": "2026-09-24T17:17:25.583",
        "metrics": {},
        "published": "2026-09-24T17:17:25.583",
        "references": [
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "url": "https://git.kernel.org/stable/c/0c6bf45e5a345cc3b9ffbeaf9083ecac3c2293eb"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "url": "https://git.kernel.org/stable/c/2881b2e6da02daea1eb8254247ba8fd20c9d3348"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "url": "https://git.kernel.org/stable/c/4295c58990b7a84e8349a2226db692e252825b60"
          }
        ],
        "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "vulnStatus": "Received"
      }
    }
  }
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.

Loading…

Loading…

Loading…

Related by attack behaviour

Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.


Loading…