FKIE_CVE-2021-47069

Vulnerability from fkie_nvd - Published: 2024-03-01 22:15 - Updated: 2026-08-04 10:16
Summary
In the Linux kernel, the following vulnerability has been resolved: ipc/mqueue, msg, sem: avoid relying on a stack reference past its expiry do_mq_timedreceive calls wq_sleep with a stack local address. The sender (do_mq_timedsend) uses this address to later call pipelined_send. This leads to a very hard to trigger race where a do_mq_timedreceive call might return and leave do_mq_timedsend to rely on an invalid address, causing the following crash: RIP: 0010:wake_q_add_safe+0x13/0x60 Call Trace: __x64_sys_mq_timedsend+0x2a9/0x490 do_syscall_64+0x80/0x680 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f5928e40343 The race occurs as: 1. do_mq_timedreceive calls wq_sleep with the address of `struct ext_wait_queue` on function stack (aliased as `ewq_addr` here) - it holds a valid `struct ext_wait_queue *` as long as the stack has not been overwritten. 2. `ewq_addr` gets added to info->e_wait_q[RECV].list in wq_add, and do_mq_timedsend receives it via wq_get_first_waiter(info, RECV) to call __pipelined_op. 3. Sender calls __pipelined_op::smp_store_release(&this->state, STATE_READY). Here is where the race window begins. (`this` is `ewq_addr`.) 4. If the receiver wakes up now in do_mq_timedreceive::wq_sleep, it will see `state == STATE_READY` and break. 5. do_mq_timedreceive returns, and `ewq_addr` is no longer guaranteed to be a `struct ext_wait_queue *` since it was on do_mq_timedreceive's stack. (Although the address may not get overwritten until another function happens to touch it, which means it can persist around for an indefinite time.) 6. do_mq_timedsend::__pipelined_op() still believes `ewq_addr` is a `struct ext_wait_queue *`, and uses it to find a task_struct to pass to the wake_q_add_safe call. In the lucky case where nothing has overwritten `ewq_addr` yet, `ewq_addr->task` is the right task_struct. In the unlucky case, __pipelined_op::wake_q_add_safe gets handed a bogus address as the receiver's task_struct causing the crash. do_mq_timedsend::__pipelined_op() should not dereference `this` after setting STATE_READY, as the receiver counterpart is now free to return. Change __pipelined_op to call wake_q_add_safe on the receiver's task_struct returned by get_task_struct, instead of dereferencing `this` which sits on the receiver's stack. As Manfred pointed out, the race potentially also exists in ipc/msg.c::expunge_all and ipc/sem.c::wake_up_sem_queue_prepare. Fix those in the same way.
Impacted products
Vendor Product Version
linux linux_kernel *
linux linux_kernel *
linux linux_kernel 5.13
linux linux_kernel 5.13

{
  "affected": [
    {
      "affectedData": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "ipc/mqueue.c",
            "ipc/msg.c",
            "ipc/sem.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "4528c0c323085e645b8765913b4a7fd42cf49b65",
              "status": "affected",
              "version": "c5b2cbdbdac563f46ecd5e187253ab1abbd6fc04",
              "versionType": "git"
            },
            {
              "lessThan": "807fa14536b26803b858da878b643be72952a097",
              "status": "affected",
              "version": "c5b2cbdbdac563f46ecd5e187253ab1abbd6fc04",
              "versionType": "git"
            },
            {
              "lessThan": "a11ddb37bf367e6b5239b95ca759e5389bb46048",
              "status": "affected",
              "version": "c5b2cbdbdac563f46ecd5e187253ab1abbd6fc04",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "ipc/mqueue.c",
            "ipc/msg.c",
            "ipc/sem.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "5.6"
            },
            {
              "lessThan": "5.6",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.10.*",
              "status": "unaffected",
              "version": "5.10.40",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.12.*",
              "status": "unaffected",
              "version": "5.12.7",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "5.13",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    }
  ],
  "configurations": [
    {
      "nodes": [
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "CC04C860-B3F3-4630-B20D-99BEA8F2A42A",
              "versionEndExcluding": "5.10.40",
              "versionStartIncluding": "5.6",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "E8F2CE30-38B0-4716-B12B-A139B0F9C5C9",
              "versionEndExcluding": "5.12.7",
              "versionStartIncluding": "5.11",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:5.13:rc1:*:*:*:*:*:*",
              "matchCriteriaId": "0CBAD0FC-C281-4666-AB2F-F8E6E1165DF7",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:5.13:rc2:*:*:*:*:*:*",
              "matchCriteriaId": "96AC23B2-D46A-49D9-8203-8E1BEDCA8532",
              "vulnerable": true
            }
          ],
          "negate": false,
          "operator": "OR"
        }
      ]
    }
  ],
  "cveTags": [],
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nipc/mqueue, msg, sem: avoid relying on a stack reference past its expiry\n\ndo_mq_timedreceive calls wq_sleep with a stack local address.  The\nsender (do_mq_timedsend) uses this address to later call pipelined_send.\n\nThis leads to a very hard to trigger race where a do_mq_timedreceive\ncall might return and leave do_mq_timedsend to rely on an invalid\naddress, causing the following crash:\n\n  RIP: 0010:wake_q_add_safe+0x13/0x60\n  Call Trace:\n   __x64_sys_mq_timedsend+0x2a9/0x490\n   do_syscall_64+0x80/0x680\n   entry_SYSCALL_64_after_hwframe+0x44/0xa9\n  RIP: 0033:0x7f5928e40343\n\nThe race occurs as:\n\n1. do_mq_timedreceive calls wq_sleep with the address of `struct\n   ext_wait_queue` on function stack (aliased as `ewq_addr` here) - it\n   holds a valid `struct ext_wait_queue *` as long as the stack has not\n   been overwritten.\n\n2. `ewq_addr` gets added to info-\u003ee_wait_q[RECV].list in wq_add, and\n   do_mq_timedsend receives it via wq_get_first_waiter(info, RECV) to call\n   __pipelined_op.\n\n3. Sender calls __pipelined_op::smp_store_release(\u0026this-\u003estate,\n   STATE_READY).  Here is where the race window begins.  (`this` is\n   `ewq_addr`.)\n\n4. If the receiver wakes up now in do_mq_timedreceive::wq_sleep, it\n   will see `state == STATE_READY` and break.\n\n5. do_mq_timedreceive returns, and `ewq_addr` is no longer guaranteed\n   to be a `struct ext_wait_queue *` since it was on do_mq_timedreceive\u0027s\n   stack.  (Although the address may not get overwritten until another\n   function happens to touch it, which means it can persist around for an\n   indefinite time.)\n\n6. do_mq_timedsend::__pipelined_op() still believes `ewq_addr` is a\n   `struct ext_wait_queue *`, and uses it to find a task_struct to pass to\n   the wake_q_add_safe call.  In the lucky case where nothing has\n   overwritten `ewq_addr` yet, `ewq_addr-\u003etask` is the right task_struct.\n   In the unlucky case, __pipelined_op::wake_q_add_safe gets handed a\n   bogus address as the receiver\u0027s task_struct causing the crash.\n\ndo_mq_timedsend::__pipelined_op() should not dereference `this` after\nsetting STATE_READY, as the receiver counterpart is now free to return.\nChange __pipelined_op to call wake_q_add_safe on the receiver\u0027s\ntask_struct returned by get_task_struct, instead of dereferencing `this`\nwhich sits on the receiver\u0027s stack.\n\nAs Manfred pointed out, the race potentially also exists in\nipc/msg.c::expunge_all and ipc/sem.c::wake_up_sem_queue_prepare.  Fix\nthose in the same way."
    },
    {
      "lang": "es",
      "value": "En el kernel de Linux, se resolvi\u00f3 la siguiente vulnerabilidad: ipc/mqueue, msg, sem: evite confiar en una referencia de pila despu\u00e9s de su vencimiento do_mq_timedreceive llama a wq_sleep con una direcci\u00f3n local de pila. El remitente (do_mq_timedsend) usa esta direcci\u00f3n para luego llamar a pipelined_send. Esto conduce a una ejecuci\u00f3n muy dif\u00edcil de desencadenar en la que una llamada do_mq_timedreceive puede regresar y dejar que do_mq_timedsend dependa de una direcci\u00f3n no v\u00e1lida, lo que provoca el siguiente bloqueo: RIP: 0010:wake_q_add_safe+0x13/0x60 Seguimiento de llamadas: __x64_sys_mq_timedsend+0x2a9/0x490 do_syscall_64+0x80 /0x680 Entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f5928e40343 La ejecuci\u00f3n ocurre como: 1. do_mq_timedreceive llama a wq_sleep con la direcci\u00f3n de `struct ext_wait_queue` en la pila de funciones (alias `ewq_addr` aqu\u00ed): contiene una `struct ext_wait_queue * v\u00e1lida ` siempre y cuando la pila no haya sido sobrescrita. 2. `ewq_addr` se agrega a info-\u0026gt;e_wait_q[RECV].list en wq_add, y do_mq_timedsend lo recibe a trav\u00e9s de wq_get_first_waiter(info, RECV) para llamar a __pipelined_op. 3. El remitente llama a __pipelined_op::smp_store_release(\u0026amp;this-\u0026gt;state, STATE_READY). Aqu\u00ed es donde comienza la ventana de ejecuci\u00f3n. (`esto` es `ewq_addr`.) 4. Si el receptor se activa ahora en do_mq_timedreceive::wq_sleep, ver\u00e1 `state == STATE_READY` y se interrumpir\u00e1. 5. do_mq_timedreceive regresa y ya no se garantiza que `ewq_addr` sea una `struct ext_wait_queue *` ya que estaba en la pila de do_mq_timedreceive. (Aunque es posible que la direcci\u00f3n no se sobrescriba hasta que otra funci\u00f3n la toque, lo que significa que puede persistir por un tiempo indefinido). 6. do_mq_timedsend::__pipelined_op() todav\u00eda cree que `ewq_addr` es una `struct ext_wait_queue *`, y lo usa para encontrar una task_struct para pasar a la llamada wake_q_add_safe. En el afortunado caso de que nada haya sobrescrito `ewq_addr` todav\u00eda, `ewq_addr-\u0026gt;task` es la estructura de tarea correcta. En el desafortunado caso, __pipelined_op::wake_q_add_safe recibe una direcci\u00f3n falsa como la task_struct del receptor que causa el bloqueo. do_mq_timedsend::__pipelined_op() no debe eliminar la referencia a \"esto\" despu\u00e9s de configurar STATE_READY, ya que la contraparte del receptor ahora puede regresar. Cambie __pipelined_op para llamar a wake_q_add_safe en el task_struct del receptor devuelto por get_task_struct, en lugar de desreferenciar \"this\" que se encuentra en la pila del receptor. Como se\u00f1al\u00f3 Manfred, la ejecuci\u00f3n tambi\u00e9n existe potencialmente en ipc/msg.c::expunge_all e ipc/sem.c::wake_up_sem_queue_prepare. Arr\u00e9glelos de la misma manera."
    }
  ],
  "id": "CVE-2021-47069",
  "lastModified": "2026-08-04T10:16:44.070",
  "metrics": {
    "cvssMetricV31": [
      {
        "cvssData": {
          "attackComplexity": "LOW",
          "attackVector": "LOCAL",
          "availabilityImpact": "HIGH",
          "baseScore": 7.8,
          "baseSeverity": "HIGH",
          "confidentialityImpact": "HIGH",
          "integrityImpact": "HIGH",
          "privilegesRequired": "LOW",
          "scope": "UNCHANGED",
          "userInteraction": "NONE",
          "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
          "version": "3.1"
        },
        "exploitabilityScore": 1.8,
        "impactScore": 5.9,
        "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "type": "Secondary"
      },
      {
        "cvssData": {
          "attackComplexity": "HIGH",
          "attackVector": "LOCAL",
          "availabilityImpact": "HIGH",
          "baseScore": 7.0,
          "baseSeverity": "HIGH",
          "confidentialityImpact": "HIGH",
          "integrityImpact": "HIGH",
          "privilegesRequired": "LOW",
          "scope": "UNCHANGED",
          "userInteraction": "NONE",
          "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H",
          "version": "3.1"
        },
        "exploitabilityScore": 1.0,
        "impactScore": 5.9,
        "source": "nvd@nist.gov",
        "type": "Primary"
      }
    ],
    "ssvcV203": [
      {
        "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
        "ssvcData": {
          "id": "CVE-2021-47069",
          "options": [
            {
              "exploitation": "none"
            },
            {
              "automatable": "no"
            },
            {
              "technicalImpact": "partial"
            }
          ],
          "role": "CISA Coordinator",
          "timestamp": "2024-06-21T16:15:09.996738Z",
          "version": "2.0.3"
        }
      }
    ]
  },
  "published": "2024-03-01T22:15:46.857",
  "references": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/4528c0c323085e645b8765913b4a7fd42cf49b65"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/807fa14536b26803b858da878b643be72952a097"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/a11ddb37bf367e6b5239b95ca759e5389bb46048"
    },
    {
      "source": "af854a3a-2127-422b-91ae-364da2661108",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/4528c0c323085e645b8765913b4a7fd42cf49b65"
    },
    {
      "source": "af854a3a-2127-422b-91ae-364da2661108",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/807fa14536b26803b858da878b643be72952a097"
    },
    {
      "source": "af854a3a-2127-422b-91ae-364da2661108",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/a11ddb37bf367e6b5239b95ca759e5389bb46048"
    }
  ],
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
  "vulnStatus": "Modified",
  "weaknesses": [
    {
      "description": [
        {
          "lang": "en",
          "value": "CWE-672"
        }
      ],
      "source": "nvd@nist.gov",
      "type": "Primary"
    }
  ]
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.

Loading…

Loading…

Loading…

Related by attack behaviour

Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.


Loading…