GCVE Workshop - 22 September 2026 (14:00-18:00), Luxembourg Before The Vulnopticon Conference - Registration

FKIE_CVE-2022-50168

Vulnerability from fkie_nvd - Published: 2025-06-18 11:15 - Updated: 2026-08-04 10:18
Severity
7.8 (High) - CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
7.8 (High) - CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Summary
In the Linux kernel, the following vulnerability has been resolved: bpf, x86: fix freeing of not-finalized bpf_prog_pack syzbot reported a few issues with bpf_prog_pack [1], [2]. This only happens with multiple subprogs. In jit_subprogs(), we first call bpf_int_jit_compile() on each sub program. And then, we call it on each sub program again. jit_data is not freed in the first call of bpf_int_jit_compile(). Similarly we don't call bpf_jit_binary_pack_finalize() in the first call of bpf_int_jit_compile(). If bpf_int_jit_compile() failed for one sub program, we will call bpf_jit_binary_pack_finalize() for this sub program. However, we don't have a chance to call it for other sub programs. Then we will hit "goto out_free" in jit_subprogs(), and call bpf_jit_free on some subprograms that haven't got bpf_jit_binary_pack_finalize() yet. At this point, bpf_jit_binary_pack_free() is called and the whole 2MB page is freed erroneously. Fix this with a custom bpf_jit_free() for x86_64, which calls bpf_jit_binary_pack_finalize() if necessary. Also, with custom bpf_jit_free(), bpf_prog_aux->use_bpf_prog_pack is not needed any more, remove it. [1] https://syzkaller.appspot.com/bug?extid=2f649ec6d2eea1495a8f [2] https://syzkaller.appspot.com/bug?extid=87f65c75f4a72db05445
References
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/1d5f82d9dd477d5c66e0214a68c3e4f308eadd6dPatch
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/60e66074812dde9cde3d99cdd3caa9e40f1a4516Patch
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/f91ce608a79c0db3e72bd63c23e011a9ebc31505Patch
Impacted products
Vendor Product Version
linux linux_kernel *
linux linux_kernel *
To clipboard 

{
  "affected": [
    {
      "affectedData": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "arch/x86/net/bpf_jit_comp.c",
            "include/linux/bpf.h",
            "include/linux/filter.h",
            "kernel/bpf/core.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "f91ce608a79c0db3e72bd63c23e011a9ebc31505",
              "status": "affected",
              "version": "1022a5498f6f745c3b5fd3f050a5e11e7ca354f0",
              "versionType": "git"
            },
            {
              "lessThan": "60e66074812dde9cde3d99cdd3caa9e40f1a4516",
              "status": "affected",
              "version": "1022a5498f6f745c3b5fd3f050a5e11e7ca354f0",
              "versionType": "git"
            },
            {
              "lessThan": "1d5f82d9dd477d5c66e0214a68c3e4f308eadd6d",
              "status": "affected",
              "version": "1022a5498f6f745c3b5fd3f050a5e11e7ca354f0",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "arch/x86/net/bpf_jit_comp.c",
            "include/linux/bpf.h",
            "include/linux/filter.h",
            "kernel/bpf/core.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "5.18"
            },
            {
              "lessThan": "5.18",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.18.*",
              "status": "unaffected",
              "version": "5.18.18",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.19.*",
              "status": "unaffected",
              "version": "5.19.2",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "6.0",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    }
  ],
  "configurations": [
    {
      "nodes": [
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "28A3BD94-A9B1-461A-9325-1B7EF7D364B6",
              "versionEndExcluding": "5.18.18",
              "versionStartIncluding": "5.18",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "A1A2A5A5-4598-4D7E-BA07-4660398D6C8F",
              "versionEndExcluding": "5.19.2",
              "versionStartIncluding": "5.19",
              "vulnerable": true
            }
          ],
          "negate": false,
          "operator": "OR"
        }
      ]
    }
  ],
  "cveTags": [],
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nbpf, x86: fix freeing of not-finalized bpf_prog_pack\n\nsyzbot reported a few issues with bpf_prog_pack [1], [2]. This only happens\nwith multiple subprogs. In jit_subprogs(), we first call bpf_int_jit_compile()\non each sub program. And then, we call it on each sub program again. jit_data\nis not freed in the first call of bpf_int_jit_compile(). Similarly we don\u0027t\ncall bpf_jit_binary_pack_finalize() in the first call of bpf_int_jit_compile().\n\nIf bpf_int_jit_compile() failed for one sub program, we will call\nbpf_jit_binary_pack_finalize() for this sub program. However, we don\u0027t have a\nchance to call it for other sub programs. Then we will hit \"goto out_free\" in\njit_subprogs(), and call bpf_jit_free on some subprograms that haven\u0027t got\nbpf_jit_binary_pack_finalize() yet.\n\nAt this point, bpf_jit_binary_pack_free() is called and the whole 2MB page is\nfreed erroneously.\n\nFix this with a custom bpf_jit_free() for x86_64, which calls\nbpf_jit_binary_pack_finalize() if necessary. Also, with custom\nbpf_jit_free(), bpf_prog_aux-\u003euse_bpf_prog_pack is not needed any more,\nremove it.\n\n[1] https://syzkaller.appspot.com/bug?extid=2f649ec6d2eea1495a8f\n[2] https://syzkaller.appspot.com/bug?extid=87f65c75f4a72db05445"
    },
    {
      "lang": "es",
      "value": "En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: bpf, x86: se corrige la liberaci\u00f3n de bpf_prog_pack no finalizado. syzbot report\u00f3 algunos problemas con bpf_prog_pack [1], [2]. Esto solo ocurre con varios subprogramas. En jit_subprogs(), primero llamamos a bpf_int_jit_compile() en cada subprograma. Y luego, lo volvemos a llamar en cada subprograma. jit_data no se libera en la primera llamada de bpf_int_jit_compile(). De igual manera, no llamamos a bpf_jit_binary_pack_finalize() en la primera llamada de bpf_int_jit_compile(). Si bpf_int_jit_compile() falla en un subprograma, llamaremos a bpf_jit_binary_pack_finalize() para este subprograma. Sin embargo, no podemos llamarlo para otros subprogramas. Luego, pulsaremos \"goto out_free\" en jit_subprogs() y llamaremos a bpf_jit_free en algunos subprogramas que a\u00fan no tienen bpf_jit_binary_pack_finalize(). En este punto, se llama a bpf_jit_binary_pack_free() y se libera la p\u00e1gina completa de 2 MB por error. Se puede solucionar con un bpf_jit_free() personalizado para x86_64, que llama a bpf_jit_binary_pack_finalize() si es necesario. Adem\u00e1s, con bpf_jit_free() personalizado, bpf_prog_aux-\u0026gt;use_bpf_prog_pack ya no es necesario; elim\u00ednelo. [1] https://syzkaller.appspot.com/bug?extid=2f649ec6d2eea1495a8f [2] https://syzkaller.appspot.com/bug?extid=87f65c75f4a72db05445"
    }
  ],
  "id": "CVE-2022-50168",
  "lastModified": "2026-08-04T10:18:06.570",
  "metrics": {
    "cvssMetricV31": [
      {
        "cvssData": {
          "attackComplexity": "LOW",
          "attackVector": "LOCAL",
          "availabilityImpact": "HIGH",
          "baseScore": 7.8,
          "baseSeverity": "HIGH",
          "confidentialityImpact": "HIGH",
          "integrityImpact": "HIGH",
          "privilegesRequired": "LOW",
          "scope": "UNCHANGED",
          "userInteraction": "NONE",
          "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
          "version": "3.1"
        },
        "exploitabilityScore": 1.8,
        "impactScore": 5.9,
        "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "type": "Secondary"
      },
      {
        "cvssData": {
          "attackComplexity": "LOW",
          "attackVector": "LOCAL",
          "availabilityImpact": "HIGH",
          "baseScore": 7.8,
          "baseSeverity": "HIGH",
          "confidentialityImpact": "HIGH",
          "integrityImpact": "HIGH",
          "privilegesRequired": "LOW",
          "scope": "UNCHANGED",
          "userInteraction": "NONE",
          "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
          "version": "3.1"
        },
        "exploitabilityScore": 1.8,
        "impactScore": 5.9,
        "source": "nvd@nist.gov",
        "type": "Primary"
      }
    ]
  },
  "published": "2025-06-18T11:15:47.117",
  "references": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/1d5f82d9dd477d5c66e0214a68c3e4f308eadd6d"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/60e66074812dde9cde3d99cdd3caa9e40f1a4516"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/f91ce608a79c0db3e72bd63c23e011a9ebc31505"
    }
  ],
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
  "vulnStatus": "Modified",
  "weaknesses": [
    {
      "description": [
        {
          "lang": "en",
          "value": "NVD-CWE-noinfo"
        }
      ],
      "source": "nvd@nist.gov",
      "type": "Primary"
    }
  ]
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.





Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.


Detection rules are retrieved from Rulezet.


Related by attack behaviour

Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.