FKIE_CVE-2023-53500

Vulnerability from fkie_nvd - Published: 2025-10-01 12:15 - Updated: 2026-01-23 02:05
Severity ?
7.8 (High) - CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Summary
In the Linux kernel, the following vulnerability has been resolved: xfrm: fix slab-use-after-free in decode_session6 When the xfrm device is set to the qdisc of the sfb type, the cb field of the sent skb may be modified during enqueuing. Then, slab-use-after-free may occur when the xfrm device sends IPv6 packets. The stack information is as follows: BUG: KASAN: slab-use-after-free in decode_session6+0x103f/0x1890 Read of size 1 at addr ffff8881111458ef by task swapper/3/0 CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.4.0-next-20230707 #409 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0xd9/0x150 print_address_description.constprop.0+0x2c/0x3c0 kasan_report+0x11d/0x130 decode_session6+0x103f/0x1890 __xfrm_decode_session+0x54/0xb0 xfrmi_xmit+0x173/0x1ca0 dev_hard_start_xmit+0x187/0x700 sch_direct_xmit+0x1a3/0xc30 __qdisc_run+0x510/0x17a0 __dev_queue_xmit+0x2215/0x3b10 neigh_connected_output+0x3c2/0x550 ip6_finish_output2+0x55a/0x1550 ip6_finish_output+0x6b9/0x1270 ip6_output+0x1f1/0x540 ndisc_send_skb+0xa63/0x1890 ndisc_send_rs+0x132/0x6f0 addrconf_rs_timer+0x3f1/0x870 call_timer_fn+0x1a0/0x580 expire_timers+0x29b/0x4b0 run_timer_softirq+0x326/0x910 __do_softirq+0x1d4/0x905 irq_exit_rcu+0xb7/0x120 sysvec_apic_timer_interrupt+0x97/0xc0 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 RIP: 0010:intel_idle_hlt+0x23/0x30 Code: 1f 84 00 00 00 00 00 f3 0f 1e fa 41 54 41 89 d4 0f 1f 44 00 00 66 90 0f 1f 44 00 00 0f 00 2d c4 9f ab 00 0f 1f 44 00 00 fb f4 <fa> 44 89 e0 41 5c c3 66 0f 1f 44 00 00 f3 0f 1e fa 41 54 41 89 d4 RSP: 0018:ffffc90000197d78 EFLAGS: 00000246 RAX: 00000000000a83c3 RBX: ffffe8ffffd09c50 RCX: ffffffff8a22d8e5 RDX: 0000000000000001 RSI: ffffffff8d3f8080 RDI: ffffe8ffffd09c50 RBP: ffffffff8d3f8080 R08: 0000000000000001 R09: ffffed1026ba6d9d R10: ffff888135d36ceb R11: 0000000000000001 R12: 0000000000000001 R13: ffffffff8d3f8100 R14: 0000000000000001 R15: 0000000000000000 cpuidle_enter_state+0xd3/0x6f0 cpuidle_enter+0x4e/0xa0 do_idle+0x2fe/0x3c0 cpu_startup_entry+0x18/0x20 start_secondary+0x200/0x290 secondary_startup_64_no_verify+0x167/0x16b </TASK> Allocated by task 939: kasan_save_stack+0x22/0x40 kasan_set_track+0x25/0x30 __kasan_slab_alloc+0x7f/0x90 kmem_cache_alloc_node+0x1cd/0x410 kmalloc_reserve+0x165/0x270 __alloc_skb+0x129/0x330 inet6_ifa_notify+0x118/0x230 __ipv6_ifa_notify+0x177/0xbe0 addrconf_dad_completed+0x133/0xe00 addrconf_dad_work+0x764/0x1390 process_one_work+0xa32/0x16f0 worker_thread+0x67d/0x10c0 kthread+0x344/0x440 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff888111145800 which belongs to the cache skbuff_small_head of size 640 The buggy address is located 239 bytes inside of freed 640-byte region [ffff888111145800, ffff888111145a80) As commit f855691975bb ("xfrm6: Fix the nexthdr offset in _decode_session6.") showed, xfrm_decode_session was originally intended only for the receive path. IP6CB(skb)->nhoff is not set during transmission. Therefore, set the cb field in the skb to 0 before sending packets.
References
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/0d27567fde5be5f0edc2db5c110142b7915b8fa8Patch
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/44b3d40967009304617a7a6486490c1d6c12f899Patch
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/53223f2ed1ef5c90dad814daaaefea4e68a933c8Patch
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/86f15300a22656db3fa8c8967defbcd24fac4d37Patch
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/bafa236380816b41b2c4c6970d9067fefa4a6c9ePatch
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/da4cbaa75ed088b6d70db77b9103a27e2359e243Patch
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/db0e50741f0387f388e9ec824ea7ae8456554d5bPatch
Impacted products
Vendor Product Version
linux linux_kernel *
linux linux_kernel *
linux linux_kernel *
linux linux_kernel *
linux linux_kernel *
linux linux_kernel *
linux linux_kernel 3.19
linux linux_kernel 3.19
linux linux_kernel 6.5
linux linux_kernel 6.5
linux linux_kernel 6.5
linux linux_kernel 6.5
linux linux_kernel 6.5
linux linux_kernel 6.5
To clipboard 

{
  "configurations": [
    {
      "nodes": [
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "6600AC7B-1E50-44F6-8999-98594E768A52",
              "versionEndExcluding": "4.19.293",
              "versionStartIncluding": "3.19.1",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "1379E40A-2AC3-484E-929A-7F46B6C3B521",
              "versionEndExcluding": "5.4.255",
              "versionStartIncluding": "4.20",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "9396FFDC-6A0D-44B7-9368-21B456F6D4AE",
              "versionEndExcluding": "5.10.192",
              "versionStartIncluding": "5.5",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "1415629F-F97B-4880-BA1E-AF3DBB8EF305",
              "versionEndExcluding": "5.15.128",
              "versionStartIncluding": "5.11",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "2EEA01B0-0151-4E0F-B140-1A441EEDD717",
              "versionEndExcluding": "6.1.47",
              "versionStartIncluding": "5.16",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "CF8ECF64-40AE-49AB-8315-4D83F9F56ECF",
              "versionEndExcluding": "6.4.12",
              "versionStartIncluding": "6.2",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:3.19:-:*:*:*:*:*:*",
              "matchCriteriaId": "8C54596F-5461-44C4-91FB-7453BE905748",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:3.19:rc7:*:*:*:*:*:*",
              "matchCriteriaId": "5843CB48-122D-496D-B66D-35296BC0EFB1",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:6.5:rc1:*:*:*:*:*:*",
              "matchCriteriaId": "0B3E6E4D-E24E-4630-B00C-8C9901C597B0",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:6.5:rc2:*:*:*:*:*:*",
              "matchCriteriaId": "E4A01A71-0F09-4DB2-A02F-7EFFBE27C98D",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:6.5:rc3:*:*:*:*:*:*",
              "matchCriteriaId": "F5608371-157A-4318-8A2E-4104C3467EA1",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:6.5:rc4:*:*:*:*:*:*",
              "matchCriteriaId": "2226A776-DF8C-49E0-A030-0A7853BB018A",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:6.5:rc5:*:*:*:*:*:*",
              "matchCriteriaId": "6F15C659-DF06-455A-9765-0E6DE920F29A",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:6.5:rc6:*:*:*:*:*:*",
              "matchCriteriaId": "5B1C14ED-ABC4-41D3-8D9C-D38C6A65B4DE",
              "vulnerable": true
            }
          ],
          "negate": false,
          "operator": "OR"
        }
      ]
    }
  ],
  "cveTags": [],
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nxfrm: fix slab-use-after-free in decode_session6\n\nWhen the xfrm device is set to the qdisc of the sfb type, the cb field\nof the sent skb may be modified during enqueuing. Then,\nslab-use-after-free may occur when the xfrm device sends IPv6 packets.\n\nThe stack information is as follows:\nBUG: KASAN: slab-use-after-free in decode_session6+0x103f/0x1890\nRead of size 1 at addr ffff8881111458ef by task swapper/3/0\nCPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.4.0-next-20230707 #409\nHardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014\nCall Trace:\n\u003cIRQ\u003e\ndump_stack_lvl+0xd9/0x150\nprint_address_description.constprop.0+0x2c/0x3c0\nkasan_report+0x11d/0x130\ndecode_session6+0x103f/0x1890\n__xfrm_decode_session+0x54/0xb0\nxfrmi_xmit+0x173/0x1ca0\ndev_hard_start_xmit+0x187/0x700\nsch_direct_xmit+0x1a3/0xc30\n__qdisc_run+0x510/0x17a0\n__dev_queue_xmit+0x2215/0x3b10\nneigh_connected_output+0x3c2/0x550\nip6_finish_output2+0x55a/0x1550\nip6_finish_output+0x6b9/0x1270\nip6_output+0x1f1/0x540\nndisc_send_skb+0xa63/0x1890\nndisc_send_rs+0x132/0x6f0\naddrconf_rs_timer+0x3f1/0x870\ncall_timer_fn+0x1a0/0x580\nexpire_timers+0x29b/0x4b0\nrun_timer_softirq+0x326/0x910\n__do_softirq+0x1d4/0x905\nirq_exit_rcu+0xb7/0x120\nsysvec_apic_timer_interrupt+0x97/0xc0\n\u003c/IRQ\u003e\n\u003cTASK\u003e\nasm_sysvec_apic_timer_interrupt+0x1a/0x20\nRIP: 0010:intel_idle_hlt+0x23/0x30\nCode: 1f 84 00 00 00 00 00 f3 0f 1e fa 41 54 41 89 d4 0f 1f 44 00 00 66 90 0f 1f 44 00 00 0f 00 2d c4 9f ab 00 0f 1f 44 00 00 fb f4 \u003cfa\u003e 44 89 e0 41 5c c3 66 0f 1f 44 00 00 f3 0f 1e fa 41 54 41 89 d4\nRSP: 0018:ffffc90000197d78 EFLAGS: 00000246\nRAX: 00000000000a83c3 RBX: ffffe8ffffd09c50 RCX: ffffffff8a22d8e5\nRDX: 0000000000000001 RSI: ffffffff8d3f8080 RDI: ffffe8ffffd09c50\nRBP: ffffffff8d3f8080 R08: 0000000000000001 R09: ffffed1026ba6d9d\nR10: ffff888135d36ceb R11: 0000000000000001 R12: 0000000000000001\nR13: ffffffff8d3f8100 R14: 0000000000000001 R15: 0000000000000000\ncpuidle_enter_state+0xd3/0x6f0\ncpuidle_enter+0x4e/0xa0\ndo_idle+0x2fe/0x3c0\ncpu_startup_entry+0x18/0x20\nstart_secondary+0x200/0x290\nsecondary_startup_64_no_verify+0x167/0x16b\n\u003c/TASK\u003e\nAllocated by task 939:\nkasan_save_stack+0x22/0x40\nkasan_set_track+0x25/0x30\n__kasan_slab_alloc+0x7f/0x90\nkmem_cache_alloc_node+0x1cd/0x410\nkmalloc_reserve+0x165/0x270\n__alloc_skb+0x129/0x330\ninet6_ifa_notify+0x118/0x230\n__ipv6_ifa_notify+0x177/0xbe0\naddrconf_dad_completed+0x133/0xe00\naddrconf_dad_work+0x764/0x1390\nprocess_one_work+0xa32/0x16f0\nworker_thread+0x67d/0x10c0\nkthread+0x344/0x440\nret_from_fork+0x1f/0x30\nThe buggy address belongs to the object at ffff888111145800\nwhich belongs to the cache skbuff_small_head of size 640\nThe buggy address is located 239 bytes inside of\nfreed 640-byte region [ffff888111145800, ffff888111145a80)\n\nAs commit f855691975bb (\"xfrm6: Fix the nexthdr offset in\n_decode_session6.\") showed, xfrm_decode_session was originally intended\nonly for the receive path. IP6CB(skb)-\u003enhoff is not set during\ntransmission. Therefore, set the cb field in the skb to 0 before\nsending packets."
    }
  ],
  "id": "CVE-2023-53500",
  "lastModified": "2026-01-23T02:05:46.433",
  "metrics": {
    "cvssMetricV31": [
      {
        "cvssData": {
          "attackComplexity": "LOW",
          "attackVector": "LOCAL",
          "availabilityImpact": "HIGH",
          "baseScore": 7.8,
          "baseSeverity": "HIGH",
          "confidentialityImpact": "HIGH",
          "integrityImpact": "HIGH",
          "privilegesRequired": "LOW",
          "scope": "UNCHANGED",
          "userInteraction": "NONE",
          "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
          "version": "3.1"
        },
        "exploitabilityScore": 1.8,
        "impactScore": 5.9,
        "source": "nvd@nist.gov",
        "type": "Primary"
      }
    ]
  },
  "published": "2025-10-01T12:15:53.490",
  "references": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/0d27567fde5be5f0edc2db5c110142b7915b8fa8"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/44b3d40967009304617a7a6486490c1d6c12f899"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/53223f2ed1ef5c90dad814daaaefea4e68a933c8"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/86f15300a22656db3fa8c8967defbcd24fac4d37"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/bafa236380816b41b2c4c6970d9067fefa4a6c9e"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/da4cbaa75ed088b6d70db77b9103a27e2359e243"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/db0e50741f0387f388e9ec824ea7ae8456554d5b"
    }
  ],
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
  "vulnStatus": "Analyzed",
  "weaknesses": [
    {
      "description": [
        {
          "lang": "en",
          "value": "CWE-416"
        }
      ],
      "source": "nvd@nist.gov",
      "type": "Primary"
    }
  ]
}


Log in or create an account to share your comment.




Tags
Taxonomy of the tags.




Sightings

Author Source Type Date

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.



Detection rules are retrieved from Rulezet.