GCVE Workshop - 22 September 2026 (14:00-18:00), Luxembourg Before The Vulnopticon Conference - Registration

FKIE_CVE-2025-38141

Vulnerability from fkie_nvd - Published: 2025-07-03 09:15 - Updated: 2026-07-30 06:22
Summary
In the Linux kernel, the following vulnerability has been resolved: dm: fix dm_blk_report_zones If dm_get_live_table() returned NULL, dm_put_live_table() was never called. Also, it is possible that md->zone_revalidate_map will change while calling this function. Only read it once, so that we are always using the same value. Otherwise we might miss a call to dm_put_live_table(). Finally, while md->zone_revalidate_map is set and a process is calling blk_revalidate_disk_zones() to set up the zone append emulation resources, it is possible that another process, perhaps triggered by blkdev_report_zones_ioctl(), will call dm_blk_report_zones(). If blk_revalidate_disk_zones() fails, these resources can be freed while the other process is still using them, causing a use-after-free error. blk_revalidate_disk_zones() will only ever be called when initially setting up the zone append emulation resources, such as when setting up a zoned dm-crypt table for the first time. Further table swaps will not set md->zone_revalidate_map or call blk_revalidate_disk_zones(). However it must be called using the new table (referenced by md->zone_revalidate_map) and the new queue limits while the DM device is suspended. dm_blk_report_zones() needs some way to distinguish between a call from blk_revalidate_disk_zones(), which must be allowed to use md->zone_revalidate_map to access this not yet activated table, and all other calls to dm_blk_report_zones(), which should not be allowed while the device is suspended and cannot use md->zone_revalidate_map, since the zone resources might be freed by the process currently calling blk_revalidate_disk_zones(). Solve this by tracking the process that sets md->zone_revalidate_map in dm_revalidate_zones() and only allowing that process to make use of it in dm_blk_report_zones().
Impacted products
Vendor Product Version
linux linux_kernel *
linux linux_kernel *

{
  "affected": [
    {
      "affectedData": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "drivers/md/dm-core.h",
            "drivers/md/dm-zone.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "f9c1bdf24615303d48a2d0fd629c88f3189563aa",
              "status": "affected",
              "version": "f211268ed1f9bdf48f06a3ead5f5d88437450579",
              "versionType": "git"
            },
            {
              "lessThan": "d19bc1b4dd5f322980b1f05f79b2ea4f0db10920",
              "status": "affected",
              "version": "f211268ed1f9bdf48f06a3ead5f5d88437450579",
              "versionType": "git"
            },
            {
              "lessThan": "37f53a2c60d03743e0eacf7a0c01c279776fef4e",
              "status": "affected",
              "version": "f211268ed1f9bdf48f06a3ead5f5d88437450579",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "drivers/md/dm-core.h",
            "drivers/md/dm-zone.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "6.10"
            },
            {
              "lessThan": "6.10",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.12.*",
              "status": "unaffected",
              "version": "6.12.34",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.15.*",
              "status": "unaffected",
              "version": "6.15.3",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "6.16",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    }
  ],
  "configurations": [
    {
      "nodes": [
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "F6499D2B-1E57-44BB-866C-D74E63C32759",
              "versionEndExcluding": "6.12.34",
              "versionStartIncluding": "6.10",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "0541C761-BD5E-4C1A-8432-83B375D7EB92",
              "versionEndExcluding": "6.15.3",
              "versionStartIncluding": "6.13",
              "vulnerable": true
            }
          ],
          "negate": false,
          "operator": "OR"
        }
      ]
    }
  ],
  "cveTags": [],
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\ndm: fix dm_blk_report_zones\n\nIf dm_get_live_table() returned NULL, dm_put_live_table() was never\ncalled. Also, it is possible that md-\u003ezone_revalidate_map will change\nwhile calling this function. Only read it once, so that we are always\nusing the same value. Otherwise we might miss a call to\ndm_put_live_table().\n\nFinally, while md-\u003ezone_revalidate_map is set and a process is calling\nblk_revalidate_disk_zones() to set up the zone append emulation\nresources, it is possible that another process, perhaps triggered by\nblkdev_report_zones_ioctl(), will call dm_blk_report_zones(). If\nblk_revalidate_disk_zones() fails, these resources can be freed while\nthe other process is still using them, causing a use-after-free error.\n\nblk_revalidate_disk_zones() will only ever be called when initially\nsetting up the zone append emulation resources, such as when setting up\na zoned dm-crypt table for the first time. Further table swaps will not\nset md-\u003ezone_revalidate_map or call blk_revalidate_disk_zones().\nHowever it must be called using the new table (referenced by\nmd-\u003ezone_revalidate_map) and the new queue limits while the DM device is\nsuspended. dm_blk_report_zones() needs some way to distinguish between a\ncall from blk_revalidate_disk_zones(), which must be allowed to use\nmd-\u003ezone_revalidate_map to access this not yet activated table, and all\nother calls to dm_blk_report_zones(), which should not be allowed while\nthe device is suspended and cannot use md-\u003ezone_revalidate_map, since\nthe zone resources might be freed by the process currently calling\nblk_revalidate_disk_zones().\n\nSolve this by tracking the process that sets md-\u003ezone_revalidate_map in\ndm_revalidate_zones() and only allowing that process to make use of it\nin dm_blk_report_zones()."
    },
    {
      "lang": "es",
      "value": "En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: dm: fix dm_blk_report_zones Si dm_get_live_table() devolv\u00eda NULL, dm_put_live_table() nunca se llamaba. Adem\u00e1s, es posible que md-\u0026gt;zone_revalidate_map cambie al llamar a esta funci\u00f3n. Solo l\u00e9alo una vez, para que siempre usemos el mismo valor. De lo contrario, podr\u00edamos perder una llamada a dm_put_live_table(). Finalmente, mientras md-\u0026gt;zone_revalidate_map est\u00e1 configurado y un proceso est\u00e1 llamando a blk_revalidate_disk_zones() para configurar los recursos de emulaci\u00f3n de anexi\u00f3n de zona, es posible que otro proceso, quiz\u00e1s activado por blkdev_report_zones_ioctl(), llame a dm_blk_report_zones(). Si blk_revalidate_disk_zones() falla, estos recursos pueden liberarse mientras el otro proceso a\u00fan los est\u00e1 usando, causando un error de uso despu\u00e9s de liberaci\u00f3n. blk_revalidate_disk_zones() solo se llamar\u00e1 al configurar inicialmente los recursos de emulaci\u00f3n de anexi\u00f3n de zona, como al configurar una tabla dm-crypt zonificada por primera vez. Los intercambios de tabla posteriores no establecer\u00e1n md-\u0026gt;zone_revalidate_map ni llamar\u00e1n a blk_revalidate_disk_zones(). Sin embargo, debe llamarse utilizando la nueva tabla (referenciada por md-\u0026gt;zone_revalidate_map) y los nuevos l\u00edmites de cola mientras el dispositivo DM est\u00e9 suspendido. dm_blk_report_zones() necesita distinguir entre una llamada a blk_revalidate_disk_zones(), que debe permitir el uso de md-\u0026gt;zone_revalidate_map para acceder a esta tabla a\u00fan no activada, y todas las dem\u00e1s llamadas a dm_blk_report_zones(), que no deben permitirse mientras el dispositivo est\u00e9 suspendido y no puedan usar md-\u0026gt;zone_revalidate_map, ya que los recursos de la zona podr\u00edan ser liberados por el proceso que llama a blk_revalidate_disk_zones(). Para solucionar esto, se debe rastrear el proceso que establece md-\u0026gt;zone_revalidate_map en dm_revalidate_zones() y permitir que solo ese proceso lo use en dm_blk_report_zones()."
    }
  ],
  "id": "CVE-2025-38141",
  "lastModified": "2026-07-30T06:22:54.850",
  "metrics": {
    "cvssMetricV31": [
      {
        "cvssData": {
          "attackComplexity": "LOW",
          "attackVector": "LOCAL",
          "availabilityImpact": "HIGH",
          "baseScore": 7.8,
          "baseSeverity": "HIGH",
          "confidentialityImpact": "HIGH",
          "integrityImpact": "HIGH",
          "privilegesRequired": "LOW",
          "scope": "UNCHANGED",
          "userInteraction": "NONE",
          "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
          "version": "3.1"
        },
        "exploitabilityScore": 1.8,
        "impactScore": 5.9,
        "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "type": "Secondary"
      },
      {
        "cvssData": {
          "attackComplexity": "LOW",
          "attackVector": "LOCAL",
          "availabilityImpact": "HIGH",
          "baseScore": 7.8,
          "baseSeverity": "HIGH",
          "confidentialityImpact": "HIGH",
          "integrityImpact": "HIGH",
          "privilegesRequired": "LOW",
          "scope": "UNCHANGED",
          "userInteraction": "NONE",
          "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
          "version": "3.1"
        },
        "exploitabilityScore": 1.8,
        "impactScore": 5.9,
        "source": "nvd@nist.gov",
        "type": "Primary"
      }
    ],
    "ssvcV203": [
      {
        "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
        "ssvcData": {
          "id": "CVE-2025-38141",
          "options": [
            {
              "exploitation": "none"
            },
            {
              "automatable": "no"
            },
            {
              "technicalImpact": "total"
            }
          ],
          "role": "CISA Coordinator",
          "timestamp": "2026-06-10T20:40:19.111521Z",
          "version": "2.0.3"
        }
      }
    ]
  },
  "published": "2025-07-03T09:15:28.740",
  "references": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/37f53a2c60d03743e0eacf7a0c01c279776fef4e"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/d19bc1b4dd5f322980b1f05f79b2ea4f0db10920"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/f9c1bdf24615303d48a2d0fd629c88f3189563aa"
    }
  ],
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
  "vulnStatus": "Modified",
  "weaknesses": [
    {
      "description": [
        {
          "lang": "en",
          "value": "CWE-416"
        }
      ],
      "source": "nvd@nist.gov",
      "type": "Primary"
    }
  ]
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.

Loading…

Detection rules are retrieved from Rulezet.

Loading…

Loading…

Related by attack behaviour

Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.


Loading…