FKIE_CVE-2025-68206

Vulnerability from fkie_nvd - Published: 2025-12-16 14:15 - Updated: 2026-07-30 06:24
Severity
7.5 (High) - CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
Summary
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: add seqadj extension for natted connections Sequence adjustment may be required for FTP traffic with PASV/EPSV modes. due to need to re-write packet payload (IP, port) on the ftp control connection. This can require changes to the TCP length and expected seq / ack_seq. The easiest way to reproduce this issue is with PASV mode. Example ruleset: table inet ftp_nat { ct helper ftp_helper { type "ftp" protocol tcp l3proto inet } chain prerouting { type filter hook prerouting priority 0; policy accept; tcp dport 21 ct state new ct helper set "ftp_helper" } } table ip nat { chain prerouting { type nat hook prerouting priority -100; policy accept; tcp dport 21 dnat ip prefix to ip daddr map { 192.168.100.1 : 192.168.13.2/32 } } chain postrouting { type nat hook postrouting priority 100 ; policy accept; tcp sport 21 snat ip prefix to ip saddr map { 192.168.13.2 : 192.168.100.1/32 } } } Note that the ftp helper gets assigned *after* the dnat setup. The inverse (nat after helper assign) is handled by an existing check in nf_nat_setup_info() and will not show the problem. Topoloy: +-------------------+ +----------------------------------+ | FTP: 192.168.13.2 | <-> | NAT: 192.168.13.3, 192.168.100.1 | +-------------------+ +----------------------------------+ | +-----------------------+ | Client: 192.168.100.2 | +-----------------------+ ftp nat changes do not work as expected in this case: Connected to 192.168.100.1. [..] ftp> epsv EPSV/EPRT on IPv4 off. ftp> ls 227 Entering passive mode (192,168,100,1,209,129). 421 Service not available, remote server has closed connection. Kernel logs: Missing nfct_seqadj_ext_add() setup call WARNING: CPU: 1 PID: 0 at net/netfilter/nf_conntrack_seqadj.c:41 [..] __nf_nat_mangle_tcp_packet+0x100/0x160 [nf_nat] nf_nat_ftp+0x142/0x280 [nf_nat_ftp] help+0x4d1/0x880 [nf_conntrack_ftp] nf_confirm+0x122/0x2e0 [nf_conntrack] nf_hook_slow+0x3c/0xb0 .. Fix this by adding the required extension when a conntrack helper is assigned to a connection that has a nat binding.
References
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/2b52d89cbbb0dbe3e948d8d9a91e704316dccfe6
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/4ab2cd906e4e1a19ddbda6eb532851b0e9cda110
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/4de80f0dc3868408dd7fe9817e507123c9dd8bb0
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/83273af0b60c093ba0085c205864d8542e1b1653
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/90918e3b6404c2a37837b8f11692471b4c512de2
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/b19492c25eff04852e0cb58f9bb8238b6695ed2d
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/b477ef7fa612fa45b6b3134d90d1eeb09396500a
0b142b55-0307-4c5a-b3c9-f314f3fb7c5ehttps://cert-portal.siemens.com/productcert/html/ssa-019113.html
0b142b55-0307-4c5a-b3c9-f314f3fb7c5ehttps://cert-portal.siemens.com/productcert/html/ssa-082556.html
Impacted products
Vendor Product Version
To clipboard 

{
  "affected": [
    {
      "affectedData": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "net/netfilter/nft_ct.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "83273af0b60c093ba0085c205864d8542e1b1653",
              "status": "affected",
              "version": "1a64edf54f55d7956cf5a0d95898bc1f84f9b818",
              "versionType": "git"
            },
            {
              "lessThan": "b19492c25eff04852e0cb58f9bb8238b6695ed2d",
              "status": "affected",
              "version": "1a64edf54f55d7956cf5a0d95898bc1f84f9b818",
              "versionType": "git"
            },
            {
              "lessThan": "4de80f0dc3868408dd7fe9817e507123c9dd8bb0",
              "status": "affected",
              "version": "1a64edf54f55d7956cf5a0d95898bc1f84f9b818",
              "versionType": "git"
            },
            {
              "lessThan": "b477ef7fa612fa45b6b3134d90d1eeb09396500a",
              "status": "affected",
              "version": "1a64edf54f55d7956cf5a0d95898bc1f84f9b818",
              "versionType": "git"
            },
            {
              "lessThan": "4ab2cd906e4e1a19ddbda6eb532851b0e9cda110",
              "status": "affected",
              "version": "1a64edf54f55d7956cf5a0d95898bc1f84f9b818",
              "versionType": "git"
            },
            {
              "lessThan": "2b52d89cbbb0dbe3e948d8d9a91e704316dccfe6",
              "status": "affected",
              "version": "1a64edf54f55d7956cf5a0d95898bc1f84f9b818",
              "versionType": "git"
            },
            {
              "lessThan": "90918e3b6404c2a37837b8f11692471b4c512de2",
              "status": "affected",
              "version": "1a64edf54f55d7956cf5a0d95898bc1f84f9b818",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "net/netfilter/nft_ct.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "4.12"
            },
            {
              "lessThan": "4.12",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.10.*",
              "status": "unaffected",
              "version": "5.10.253",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.15.*",
              "status": "unaffected",
              "version": "5.15.203",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.1.*",
              "status": "unaffected",
              "version": "6.1.167",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.6.*",
              "status": "unaffected",
              "version": "6.6.130",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.12.*",
              "status": "unaffected",
              "version": "6.12.64",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.17.*",
              "status": "unaffected",
              "version": "6.17.9",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "6.18",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "affectedData": [
        {
          "defaultStatus": "unknown",
          "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
          "vendor": "Siemens",
          "versions": [
            {
              "lessThan": "*",
              "status": "affected",
              "version": "V3.1.6",
              "versionType": "custom"
            }
          ]
        },
        {
          "defaultStatus": "unknown",
          "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
          "vendor": "Siemens",
          "versions": [
            {
              "lessThan": "*",
              "status": "affected",
              "version": "V3.1.5",
              "versionType": "custom"
            }
          ]
        },
        {
          "defaultStatus": "unknown",
          "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
          "vendor": "Siemens",
          "versions": [
            {
              "lessThan": "*",
              "status": "affected",
              "version": "V3.1.6",
              "versionType": "custom"
            }
          ]
        },
        {
          "defaultStatus": "unknown",
          "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
          "vendor": "Siemens",
          "versions": [
            {
              "lessThan": "*",
              "status": "affected",
              "version": "V3.1.5",
              "versionType": "custom"
            }
          ]
        },
        {
          "defaultStatus": "unknown",
          "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
          "vendor": "Siemens",
          "versions": [
            {
              "lessThan": "*",
              "status": "affected",
              "version": "V3.1.6",
              "versionType": "custom"
            }
          ]
        },
        {
          "defaultStatus": "unknown",
          "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
          "vendor": "Siemens",
          "versions": [
            {
              "lessThan": "*",
              "status": "affected",
              "version": "V3.1.5",
              "versionType": "custom"
            }
          ]
        },
        {
          "defaultStatus": "unknown",
          "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
          "vendor": "Siemens",
          "versions": [
            {
              "lessThan": "*",
              "status": "affected",
              "version": "V3.1.6",
              "versionType": "custom"
            }
          ]
        },
        {
          "defaultStatus": "unknown",
          "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
          "vendor": "Siemens",
          "versions": [
            {
              "lessThan": "*",
              "status": "affected",
              "version": "V3.1.5",
              "versionType": "custom"
            }
          ]
        },
        {
          "defaultStatus": "unknown",
          "product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP",
          "vendor": "Siemens",
          "versions": [
            {
              "lessThan": "*",
              "status": "affected",
              "version": "V3.1.6",
              "versionType": "custom"
            }
          ]
        },
        {
          "defaultStatus": "unknown",
          "product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP",
          "vendor": "Siemens",
          "versions": [
            {
              "lessThan": "*",
              "status": "affected",
              "version": "V3.1.5",
              "versionType": "custom"
            }
          ]
        }
      ],
      "source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e"
    }
  ],
  "cveTags": [],
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnetfilter: nft_ct: add seqadj extension for natted connections\n\nSequence adjustment may be required for FTP traffic with PASV/EPSV modes.\ndue to need to re-write packet payload (IP, port) on the ftp control\nconnection. This can require changes to the TCP length and expected\nseq / ack_seq.\n\nThe easiest way to reproduce this issue is with PASV mode.\nExample ruleset:\ntable inet ftp_nat {\n        ct helper ftp_helper {\n                type \"ftp\" protocol tcp\n                l3proto inet\n        }\n\n        chain prerouting {\n                type filter hook prerouting priority 0; policy accept;\n                tcp dport 21 ct state new ct helper set \"ftp_helper\"\n        }\n}\ntable ip nat {\n        chain prerouting {\n                type nat hook prerouting priority -100; policy accept;\n                tcp dport 21 dnat ip prefix to ip daddr map {\n\t\t\t192.168.100.1 : 192.168.13.2/32 }\n        }\n\n        chain postrouting {\n                type nat hook postrouting priority 100 ; policy accept;\n                tcp sport 21 snat ip prefix to ip saddr map {\n\t\t\t192.168.13.2 : 192.168.100.1/32 }\n        }\n}\n\nNote that the ftp helper gets assigned *after* the dnat setup.\n\nThe inverse (nat after helper assign) is handled by an existing\ncheck in nf_nat_setup_info() and will not show the problem.\n\nTopoloy:\n\n +-------------------+     +----------------------------------+\n | FTP: 192.168.13.2 | \u003c-\u003e | NAT: 192.168.13.3, 192.168.100.1 |\n +-------------------+     +----------------------------------+\n                                      |\n                         +-----------------------+\n                         | Client: 192.168.100.2 |\n                         +-----------------------+\n\nftp nat changes do not work as expected in this case:\nConnected to 192.168.100.1.\n[..]\nftp\u003e epsv\nEPSV/EPRT on IPv4 off.\nftp\u003e ls\n227 Entering passive mode (192,168,100,1,209,129).\n421 Service not available, remote server has closed connection.\n\nKernel logs:\nMissing nfct_seqadj_ext_add() setup call\nWARNING: CPU: 1 PID: 0 at net/netfilter/nf_conntrack_seqadj.c:41\n[..]\n __nf_nat_mangle_tcp_packet+0x100/0x160 [nf_nat]\n nf_nat_ftp+0x142/0x280 [nf_nat_ftp]\n help+0x4d1/0x880 [nf_conntrack_ftp]\n nf_confirm+0x122/0x2e0 [nf_conntrack]\n nf_hook_slow+0x3c/0xb0\n ..\n\nFix this by adding the required extension when a conntrack helper is assigned\nto a connection that has a nat binding."
    }
  ],
  "id": "CVE-2025-68206",
  "lastModified": "2026-07-30T06:24:33.213",
  "metrics": {
    "cvssMetricV31": [
      {
        "cvssData": {
          "attackComplexity": "LOW",
          "attackVector": "NETWORK",
          "availabilityImpact": "HIGH",
          "baseScore": 7.5,
          "baseSeverity": "HIGH",
          "confidentialityImpact": "NONE",
          "integrityImpact": "NONE",
          "privilegesRequired": "NONE",
          "scope": "UNCHANGED",
          "userInteraction": "NONE",
          "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
          "version": "3.1"
        },
        "exploitabilityScore": 3.9,
        "impactScore": 3.6,
        "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "type": "Secondary"
      }
    ]
  },
  "published": "2025-12-16T14:15:53.487",
  "references": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "url": "https://git.kernel.org/stable/c/2b52d89cbbb0dbe3e948d8d9a91e704316dccfe6"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "url": "https://git.kernel.org/stable/c/4ab2cd906e4e1a19ddbda6eb532851b0e9cda110"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "url": "https://git.kernel.org/stable/c/4de80f0dc3868408dd7fe9817e507123c9dd8bb0"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "url": "https://git.kernel.org/stable/c/83273af0b60c093ba0085c205864d8542e1b1653"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "url": "https://git.kernel.org/stable/c/90918e3b6404c2a37837b8f11692471b4c512de2"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "url": "https://git.kernel.org/stable/c/b19492c25eff04852e0cb58f9bb8238b6695ed2d"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "url": "https://git.kernel.org/stable/c/b477ef7fa612fa45b6b3134d90d1eeb09396500a"
    },
    {
      "source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
      "url": "https://cert-portal.siemens.com/productcert/html/ssa-019113.html"
    },
    {
      "source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
      "url": "https://cert-portal.siemens.com/productcert/html/ssa-082556.html"
    }
  ],
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
  "vulnStatus": "Deferred"
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.





Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.



Related by attack behaviour

Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.