FKIE_CVE-2026-64044

Vulnerability from fkie_nvd - Published: 2026-07-19 16:17 - Updated: 2026-09-02 21:11
Summary
In the Linux kernel, the following vulnerability has been resolved: ovpn: respect peer refcount in CMD_NEW_PEER error path ovpn_nl_peer_new_doit()'s error path calls ovpn_peer_release() directly rather than ovpn_peer_put(), bypassing the kref. The accompanying comment ("peer was not yet hashed, thus it is not used in any context") holds for UDP but not for TCP. For UDP, the ovpn_socket union uses the .ovpn arm and never points back at a peer; UDP encap_recv looks up peers via the not-yet-populated hashtables, so the new peer is unreachable until ovpn_peer_add() publishes it. For TCP, ovpn_socket_new() sets ovpn_sock->peer and ovpn_tcp_socket_attach() publishes ovpn_sock via rcu_assign_sk_user_data(). From that moment until ovpn_socket_release() detaches in the error path, the TCP fd is fully wired: userspace recvmsg / sendmsg / close / poll on the fd, as well as the strparser-driven ovpn_tcp_rcv() path, can reach the peer through sk_user_data -> ovpn_sock->peer and bump its refcount via ovpn_peer_hold(). ovpn_tcp_socket_wait_finish() (called inside ovpn_socket_release()) drains strparser and the tx work, but does not synchronize with userspace syscall callers that already hold a peer reference. If ovpn_nl_peer_modify() or ovpn_peer_add() returns an error while such a caller is in flight - notably an ovpn_tcp_recvmsg() blocked in __skb_recv_datagram() on peer->tcp.user_queue - the direct ovpn_peer_release() destroys the peer while the caller still holds the reference, and the eventual ovpn_peer_put() from that caller operates on freed memory. Replace the direct destructor call with ovpn_peer_put() so the kref correctly defers destruction until the last reference is dropped. In the common case where no concurrent user is present, behaviour is unchanged: the kref hits zero immediately and ovpn_peer_release_kref() runs the same destructor. With this conversion ovpn_peer_release() has no callers outside peer.c - ovpn_peer_release_kref() in the same translation unit is the only remaining user - so make it static and drop its declaration from peer.h.
Impacted products

{
  "affected": [
    {
      "affectedData": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "drivers/net/ovpn/netlink.c",
            "drivers/net/ovpn/peer.c",
            "drivers/net/ovpn/peer.h"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "8298834912d76dbc82c12b6b4ab7590ed2bb8ae5",
              "status": "affected",
              "version": "11851cbd60ea1e5abbd97619d69845ead99303d6",
              "versionType": "git"
            },
            {
              "lessThan": "0c3ef71879c0264de6c42463031d9e057da87840",
              "status": "affected",
              "version": "11851cbd60ea1e5abbd97619d69845ead99303d6",
              "versionType": "git"
            },
            {
              "lessThan": "1fef6614673ff0846d30acdeeaf3cf98bb5f6116",
              "status": "affected",
              "version": "11851cbd60ea1e5abbd97619d69845ead99303d6",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "drivers/net/ovpn/netlink.c",
            "drivers/net/ovpn/peer.c",
            "drivers/net/ovpn/peer.h"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "6.16"
            },
            {
              "lessThan": "6.16",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.18.*",
              "status": "unaffected",
              "version": "6.18.34",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "7.0.*",
              "status": "unaffected",
              "version": "7.0.11",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "7.1",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    }
  ],
  "configurations": [
    {
      "nodes": [
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "2437F48D-051C-4E78-83C2-F198D0F2AE92",
              "versionEndExcluding": "6.18.34",
              "versionStartIncluding": "6.16",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "0520D091-FC52-4A50-AF07-70AE7D08B750",
              "versionEndExcluding": "7.0.11",
              "versionStartIncluding": "6.19",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:7.1:rc1:*:*:*:*:*:*",
              "matchCriteriaId": "B1EF7059-E670-45F4-B422-54C40FA86390",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:7.1:rc2:*:*:*:*:*:*",
              "matchCriteriaId": "0D38F0BF-A728-4133-A358-D44A2F7EE6D6",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:7.1:rc3:*:*:*:*:*:*",
              "matchCriteriaId": "EC732D08-5F7B-46D9-B154-E60C7F4F0A97",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:7.1:rc4:*:*:*:*:*:*",
              "matchCriteriaId": "E5910A9D-F60A-409A-B486-FE66BFEBA9B9",
              "vulnerable": true
            }
          ],
          "negate": false,
          "operator": "OR"
        }
      ]
    }
  ],
  "cveTags": [],
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\novpn: respect peer refcount in CMD_NEW_PEER error path\n\novpn_nl_peer_new_doit()\u0027s error path calls ovpn_peer_release() directly\nrather than ovpn_peer_put(), bypassing the kref. The accompanying\ncomment (\"peer was not yet hashed, thus it is not used in any context\")\nholds for UDP but not for TCP.\n\nFor UDP, the ovpn_socket union uses the .ovpn arm and never points back\nat a peer; UDP encap_recv looks up peers via the not-yet-populated\nhashtables, so the new peer is unreachable until ovpn_peer_add()\npublishes it.\n\nFor TCP, ovpn_socket_new() sets ovpn_sock-\u003epeer and\novpn_tcp_socket_attach() publishes ovpn_sock via rcu_assign_sk_user_data().\nFrom that moment until ovpn_socket_release() detaches in the error path,\nthe TCP fd is fully wired: userspace recvmsg / sendmsg / close / poll\non the fd, as well as the strparser-driven ovpn_tcp_rcv() path, can\nreach the peer through sk_user_data -\u003e ovpn_sock-\u003epeer and bump its\nrefcount via ovpn_peer_hold().\n\novpn_tcp_socket_wait_finish() (called inside ovpn_socket_release())\ndrains strparser and the tx work, but does not synchronize with\nuserspace syscall callers that already hold a peer reference. If\novpn_nl_peer_modify() or ovpn_peer_add() returns an error while such\na caller is in flight - notably an ovpn_tcp_recvmsg() blocked in\n__skb_recv_datagram() on peer-\u003etcp.user_queue - the direct\novpn_peer_release() destroys the peer while the caller still holds\nthe reference, and the eventual ovpn_peer_put() from that caller\noperates on freed memory.\n\nReplace the direct destructor call with ovpn_peer_put() so the kref\ncorrectly defers destruction until the last reference is dropped.\nIn the common case where no concurrent user is present, behaviour is\nunchanged: the kref hits zero immediately and ovpn_peer_release_kref()\nruns the same destructor.\n\nWith this conversion ovpn_peer_release() has no callers outside peer.c\n- ovpn_peer_release_kref() in the same translation unit is the only\nremaining user - so make it static and drop its declaration from\npeer.h."
    }
  ],
  "id": "CVE-2026-64044",
  "lastModified": "2026-09-02T21:11:32.317",
  "metrics": {
    "cvssMetricV31": [
      {
        "cvssData": {
          "attackComplexity": "LOW",
          "attackVector": "LOCAL",
          "availabilityImpact": "HIGH",
          "baseScore": 7.8,
          "baseSeverity": "HIGH",
          "confidentialityImpact": "HIGH",
          "integrityImpact": "HIGH",
          "privilegesRequired": "LOW",
          "scope": "UNCHANGED",
          "userInteraction": "NONE",
          "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
          "version": "3.1"
        },
        "exploitabilityScore": 1.8,
        "impactScore": 5.9,
        "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "type": "Secondary"
      }
    ]
  },
  "published": "2026-07-19T16:17:44.690",
  "references": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/0c3ef71879c0264de6c42463031d9e057da87840"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/1fef6614673ff0846d30acdeeaf3cf98bb5f6116"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/8298834912d76dbc82c12b6b4ab7590ed2bb8ae5"
    }
  ],
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
  "vulnStatus": "Analyzed",
  "weaknesses": [
    {
      "description": [
        {
          "lang": "en",
          "value": "NVD-CWE-noinfo"
        }
      ],
      "source": "nvd@nist.gov",
      "type": "Primary"
    }
  ]
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.

Loading…

Loading…

Loading…

Related by attack behaviour

Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.


Loading…