GCVE Workshop - 22 September 2026 (14:00-18:00), Luxembourg Before The Vulnopticon Conference - Registration

FKIE_CVE-2026-74682

Vulnerability from fkie_nvd - Published: 2026-08-22 16:16 - Updated: 2026-08-22 16:16
Severity
Summary
In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix OOB write on Type II inbound URBs data_ep_set_params() sizes each URB transfer buffer before it adds the Format Type II transfer delimiter: u->packets = urb_packs; u->buffer_size = maxsize * u->packets; if (fmt->fmt_type == UAC_FORMAT_TYPE_II) u->packets++; /* for transfer delimiter */ u->urb = usb_alloc_urb(u->packets, GFP_KERNEL); buffer_size is computed from the pre-increment packet count and never recomputed, so for a Type II endpoint the buffer is one packet short of the packet count the URB is built with. prepare_inbound_urb() then lays out one iso frame per packet and never consults buffer_size: offs = 0; for (i = 0; i < urb_ctx->packets; i++) { urb->iso_frame_desc[i].offset = offs; urb->iso_frame_desc[i].length = ep->curpacksize; offs += ep->curpacksize; } urb->transfer_buffer_length = offs; urb->number_of_packets = urb_ctx->packets; The last descriptor therefore points one packet past the end of the transfer buffer, where the host controller writes device data on every inbound transfer. prepare_silent_urb() and prepare_playback_urb() bound their fill loops by ctx->buffer_size, so only capture is affected. fmt_type comes from the device's audio streaming descriptors, so any device advertising a Type II capture format hits this once userspace sets hw_params on the stream. KASAN on 7.2.0-rc5 (arm64) with a dummy_hcd/raw-gadget device, one report per inbound transfer: BUG: KASAN: slab-out-of-bounds in dummy_timer Write of size 64 at addr ffff0000186171c0 by task cons02/166 __asan_memcpy dummy_timer hrtimer_run_softirq Allocated by task 166: usb_alloc_coherent snd_usb_endpoint_set_params The buggy address is located 0 bytes to the right of allocated 64-byte region [ffff000018617180, ffff0000186171c0) Compute buffer_size after the delimiter packet has been accounted for, and bound the fill loop by buffer_size, as prepare_silent_urb() already does on the outbound side. This grows every Type II URB allocation by one maxsize packet. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
Impacted products
Vendor Product Version

{
  "affected": [
    {
      "affectedData": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "sound/usb/endpoint.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "6af5f29af7711233ae68d3b25c15d67478468900",
              "status": "affected",
              "version": "8fdff6a319e7dac757c558bd283dc4577e68cde7",
              "versionType": "git"
            },
            {
              "lessThan": "f1fbb50b99311b35c2e85cc70341d62082dca4b5",
              "status": "affected",
              "version": "8fdff6a319e7dac757c558bd283dc4577e68cde7",
              "versionType": "git"
            },
            {
              "lessThan": "137bf034740e5a2734794908d0aff1e0bd7cee6e",
              "status": "affected",
              "version": "8fdff6a319e7dac757c558bd283dc4577e68cde7",
              "versionType": "git"
            },
            {
              "lessThan": "6607f85242577f33d4540a0d1f4a6137f5367058",
              "status": "affected",
              "version": "8fdff6a319e7dac757c558bd283dc4577e68cde7",
              "versionType": "git"
            },
            {
              "lessThan": "ca22c94bdfc22c564ca2e11c87ba4d17ebeaaa9a",
              "status": "affected",
              "version": "8fdff6a319e7dac757c558bd283dc4577e68cde7",
              "versionType": "git"
            },
            {
              "lessThan": "0a235379825e1a6194e43861ee6658e5fc35686d",
              "status": "affected",
              "version": "8fdff6a319e7dac757c558bd283dc4577e68cde7",
              "versionType": "git"
            },
            {
              "lessThan": "d3ed4e6321bb453757044cb9e5ecb30a33f04903",
              "status": "affected",
              "version": "8fdff6a319e7dac757c558bd283dc4577e68cde7",
              "versionType": "git"
            },
            {
              "lessThan": "69ee44e1a23be62318189dc4b37fa4ad94053269",
              "status": "affected",
              "version": "8fdff6a319e7dac757c558bd283dc4577e68cde7",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "sound/usb/endpoint.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "3.5"
            },
            {
              "lessThan": "3.5",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.10.*",
              "status": "unaffected",
              "version": "5.10.265",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.15.*",
              "status": "unaffected",
              "version": "5.15.216",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.1.*",
              "status": "unaffected",
              "version": "6.1.183",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.6.*",
              "status": "unaffected",
              "version": "6.6.152",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.12.*",
              "status": "unaffected",
              "version": "6.12.104",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.18.*",
              "status": "unaffected",
              "version": "6.18.45",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "7.1.*",
              "status": "unaffected",
              "version": "7.1.9",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "7.2",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    }
  ],
  "cveTags": [],
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nALSA: usb-audio: fix OOB write on Type II inbound URBs\n\ndata_ep_set_params() sizes each URB transfer buffer before it adds the\nFormat Type II transfer delimiter:\n\n\tu-\u003epackets = urb_packs;\n\tu-\u003ebuffer_size = maxsize * u-\u003epackets;\n\n\tif (fmt-\u003efmt_type == UAC_FORMAT_TYPE_II)\n\t\tu-\u003epackets++; /* for transfer delimiter */\n\tu-\u003eurb = usb_alloc_urb(u-\u003epackets, GFP_KERNEL);\n\nbuffer_size is computed from the pre-increment packet count and never\nrecomputed, so for a Type II endpoint the buffer is one packet short of\nthe packet count the URB is built with.\n\nprepare_inbound_urb() then lays out one iso frame per packet and never\nconsults buffer_size:\n\n\toffs = 0;\n\tfor (i = 0; i \u003c urb_ctx-\u003epackets; i++) {\n\t\turb-\u003eiso_frame_desc[i].offset = offs;\n\t\turb-\u003eiso_frame_desc[i].length = ep-\u003ecurpacksize;\n\t\toffs += ep-\u003ecurpacksize;\n\t}\n\n\turb-\u003etransfer_buffer_length = offs;\n\turb-\u003enumber_of_packets = urb_ctx-\u003epackets;\n\nThe last descriptor therefore points one packet past the end of the\ntransfer buffer, where the host controller writes device data on every\ninbound transfer.  prepare_silent_urb() and prepare_playback_urb() bound\ntheir fill loops by ctx-\u003ebuffer_size, so only capture is affected.\n\nfmt_type comes from the device\u0027s audio streaming descriptors, so any\ndevice advertising a Type II capture format hits this once userspace sets\nhw_params on the stream.\n\nKASAN on 7.2.0-rc5 (arm64) with a dummy_hcd/raw-gadget device, one report\nper inbound transfer:\n\n  BUG: KASAN: slab-out-of-bounds in dummy_timer\n  Write of size 64 at addr ffff0000186171c0 by task cons02/166\n   __asan_memcpy\n   dummy_timer\n   hrtimer_run_softirq\n  Allocated by task 166:\n   usb_alloc_coherent\n   snd_usb_endpoint_set_params\n  The buggy address is located 0 bytes to the right of\n   allocated 64-byte region [ffff000018617180, ffff0000186171c0)\n\nCompute buffer_size after the delimiter packet has been accounted for,\nand bound the fill loop by buffer_size, as prepare_silent_urb() already\ndoes on the outbound side.  This grows every Type II URB allocation by\none maxsize packet.\n\nDiscovered by XBOW, triaged by Baul Lee \u003cbaul.lee@xbow.com\u003e"
    }
  ],
  "id": "CVE-2026-74682",
  "lastModified": "2026-08-22T16:16:42.480",
  "metrics": {},
  "published": "2026-08-22T16:16:42.480",
  "references": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "url": "https://git.kernel.org/stable/c/0a235379825e1a6194e43861ee6658e5fc35686d"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "url": "https://git.kernel.org/stable/c/137bf034740e5a2734794908d0aff1e0bd7cee6e"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "url": "https://git.kernel.org/stable/c/6607f85242577f33d4540a0d1f4a6137f5367058"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "url": "https://git.kernel.org/stable/c/69ee44e1a23be62318189dc4b37fa4ad94053269"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "url": "https://git.kernel.org/stable/c/6af5f29af7711233ae68d3b25c15d67478468900"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "url": "https://git.kernel.org/stable/c/ca22c94bdfc22c564ca2e11c87ba4d17ebeaaa9a"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "url": "https://git.kernel.org/stable/c/d3ed4e6321bb453757044cb9e5ecb30a33f04903"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "url": "https://git.kernel.org/stable/c/f1fbb50b99311b35c2e85cc70341d62082dca4b5"
    }
  ],
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
  "vulnStatus": "Received"
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.

Loading…

Detection rules are retrieved from Rulezet.

Loading…

Loading…

Related by attack behaviour

Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.


Loading…