FKIE_CVE-2026-93250
Vulnerability from fkie_nvd - Published: 2026-09-24 16:17 - Updated: 2026-09-24 16:17
Severity
Summary
In the Linux kernel, the following vulnerability has been resolved:
vxlan: mdb: Fix use-after-free in vxlan_mdb_flush()
vxlan_mdb_flush() iterates over the MDB entries using
hlist_for_each_entry_safe(), which only tolerates the removal of the
current entry. Contrary to the comment above the loop, the removal of an
entry can trigger the removal of another entry.
Flushing the remotes of a (*, G) entry also removes the (S, G) entries
that were created for its source list, once they are left without
remotes:
vxlan_mdb_remotes_flush()
-> vxlan_mdb_remote_del()
-> vxlan_mdb_remote_srcs_del()
-> vxlan_mdb_remote_src_del()
-> vxlan_mdb_remote_src_fwd_del()
-> __vxlan_mdb_del()
-> vxlan_mdb_entry_put()
Such an entry can be located after the (*, G) entry in the list, as
vxlan_mdb_entry_get() returns an existing entry without moving it to the
head of the list. This order is obtained by adding the (S, G) entry
before the (*, G) entry, the latter with NLM_F_REPLACE, as the addition
of the source otherwise fails with -EEXIST. The (S, G) entry is then the
entry saved by hlist_for_each_entry_safe() and it is freed while the
(*, G) entry is processed. The next iteration calls hlist_del() on it
again, writing LIST_POISON1 to LIST_POISON2 [1].
Besides device deletion, the flush is also reachable from RTM_DELMDB
with NLM_F_BULK.
Fix by re-reading the next entry after the remotes were flushed. The
current entry cannot be removed by this flush, as source lists can only
be configured on (*, G) entries and the removed entries are (S, G)
entries. It is therefore still linked and its next pointer reflects the
removals.
[1]
BUG: KASAN: wild-memory-access in vxlan_mdb_entry_put.part.0+0x328/0x588
Write of size 8 at addr dead000000000122 by task ip/327
CPU: 3 UID: 1000 PID: 327 Comm: ip Not tainted 7.2.0-rc7 #2 PREEMPT
Call trace:
vxlan_mdb_entry_put.part.0+0x328/0x588
vxlan_mdb_flush+0x1d8/0x25c
vxlan_mdb_fini+0x8c/0x100
vxlan_uninit+0x1c/0x7c
unregister_netdevice_many_notify+0x954/0xd4c
rtnl_dellink+0x210/0x530
rtnetlink_rcv_msg+0x434/0x4d0
netlink_rcv_skb+0xc4/0x204
rtnetlink_rcv+0x18/0x24
netlink_unicast+0x4b8/0x548
netlink_sendmsg+0x29c/0x560
____sys_sendmsg+0x390/0x3ec
___sys_sendmsg+0x114/0x188
__sys_sendmsg+0xf0/0x178
__arm64_sys_sendmsg+0x48/0x60
invoke_syscall.constprop.0+0x58/0x180
el0_svc_common.constprop.0+0x74/0x140
do_el0_svc+0x30/0x40
el0_svc+0x38/0x98
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
References
Impacted products
| Vendor | Product | Version |
|---|
{
"affected": [
{
"affectedData": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/net/vxlan/vxlan_mdb.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "f8a9b988e7a7bc674e74e8c901794d792c35689e",
"status": "affected",
"version": "a3a48de5eade770e911d35291217bdd69ce04ef1",
"versionType": "git"
},
{
"lessThan": "c7dc26d06f90ca11bbd6114f6a62a67d038816c7",
"status": "affected",
"version": "a3a48de5eade770e911d35291217bdd69ce04ef1",
"versionType": "git"
},
{
"lessThan": "3e6b705bc162fc7257645725a7d2cf6c71250318",
"status": "affected",
"version": "a3a48de5eade770e911d35291217bdd69ce04ef1",
"versionType": "git"
},
{
"lessThan": "f26400b325bdc2868e40612c4804c82cf8ba6275",
"status": "affected",
"version": "a3a48de5eade770e911d35291217bdd69ce04ef1",
"versionType": "git"
},
{
"lessThan": "bc2dc66a6693a78f8c1e6ca2dbebd50f16e2c366",
"status": "affected",
"version": "a3a48de5eade770e911d35291217bdd69ce04ef1",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/net/vxlan/vxlan_mdb.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "6.4"
},
{
"lessThan": "6.4",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.157",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.110",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.52",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.2.*",
"status": "unaffected",
"version": "7.2.6",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.3-rc1",
"versionType": "original_commit_for_fix"
}
]
}
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nvxlan: mdb: Fix use-after-free in vxlan_mdb_flush()\n\nvxlan_mdb_flush() iterates over the MDB entries using\nhlist_for_each_entry_safe(), which only tolerates the removal of the\ncurrent entry. Contrary to the comment above the loop, the removal of an\nentry can trigger the removal of another entry.\n\nFlushing the remotes of a (*, G) entry also removes the (S, G) entries\nthat were created for its source list, once they are left without\nremotes:\n\nvxlan_mdb_remotes_flush()\n-\u003e vxlan_mdb_remote_del()\n -\u003e vxlan_mdb_remote_srcs_del()\n -\u003e vxlan_mdb_remote_src_del()\n -\u003e vxlan_mdb_remote_src_fwd_del()\n -\u003e __vxlan_mdb_del()\n -\u003e vxlan_mdb_entry_put()\n\nSuch an entry can be located after the (*, G) entry in the list, as\nvxlan_mdb_entry_get() returns an existing entry without moving it to the\nhead of the list. This order is obtained by adding the (S, G) entry\nbefore the (*, G) entry, the latter with NLM_F_REPLACE, as the addition\nof the source otherwise fails with -EEXIST. The (S, G) entry is then the\nentry saved by hlist_for_each_entry_safe() and it is freed while the\n(*, G) entry is processed. The next iteration calls hlist_del() on it\nagain, writing LIST_POISON1 to LIST_POISON2 [1].\n\nBesides device deletion, the flush is also reachable from RTM_DELMDB\nwith NLM_F_BULK.\n\nFix by re-reading the next entry after the remotes were flushed. The\ncurrent entry cannot be removed by this flush, as source lists can only\nbe configured on (*, G) entries and the removed entries are (S, G)\nentries. It is therefore still linked and its next pointer reflects the\nremovals.\n\n[1]\nBUG: KASAN: wild-memory-access in vxlan_mdb_entry_put.part.0+0x328/0x588\nWrite of size 8 at addr dead000000000122 by task ip/327\n\nCPU: 3 UID: 1000 PID: 327 Comm: ip Not tainted 7.2.0-rc7 #2 PREEMPT\nCall trace:\n vxlan_mdb_entry_put.part.0+0x328/0x588\n vxlan_mdb_flush+0x1d8/0x25c\n vxlan_mdb_fini+0x8c/0x100\n vxlan_uninit+0x1c/0x7c\n unregister_netdevice_many_notify+0x954/0xd4c\n rtnl_dellink+0x210/0x530\n rtnetlink_rcv_msg+0x434/0x4d0\n netlink_rcv_skb+0xc4/0x204\n rtnetlink_rcv+0x18/0x24\n netlink_unicast+0x4b8/0x548\n netlink_sendmsg+0x29c/0x560\n ____sys_sendmsg+0x390/0x3ec\n ___sys_sendmsg+0x114/0x188\n __sys_sendmsg+0xf0/0x178\n __arm64_sys_sendmsg+0x48/0x60\n invoke_syscall.constprop.0+0x58/0x180\n el0_svc_common.constprop.0+0x74/0x140\n do_el0_svc+0x30/0x40\n el0_svc+0x38/0x98\n el0t_64_sync_handler+0xa0/0xe4\n el0t_64_sync+0x198/0x19c"
}
],
"id": "CVE-2026-93250",
"lastModified": "2026-09-24T16:17:21.187",
"metrics": {},
"published": "2026-09-24T16:17:21.187",
"references": [
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/3e6b705bc162fc7257645725a7d2cf6c71250318"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/bc2dc66a6693a78f8c1e6ca2dbebd50f16e2c366"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/c7dc26d06f90ca11bbd6114f6a62a67d038816c7"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/f26400b325bdc2868e40612c4804c82cf8ba6275"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/f8a9b988e7a7bc674e74e8c901794d792c35689e"
}
],
"sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"vulnStatus": "Received"
}
Loading…
Loading…
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Loading…
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Loading…
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.
Loading…