FKIE_CVE-2026-93830

Vulnerability from fkie_nvd - Published: 2026-09-24 17:17 - Updated: 2026-09-25 13:17
Severity
7.5 (High) - CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
Summary
In the Linux kernel, the following vulnerability has been resolved: net: stmmac: xgmac2: disable RBUE in default RX interrupt mask Enabling the RX Buffer Unavailable (RBUE) interrupt is counterproductive and can trigger a MAC interrupt storm under heavy RX pressure. When the DMA runs out of RX descriptors it fires RBUE continuously until software refills the ring. However, RBUE is redundant: the normal RX completion interrupt (RIE) already triggers NAPI, which processes completed descriptors and refills the ring, causing the DMA to resume. The RBUE handler itself only sets handle_rx - the same outcome as RIE. On Agilex5 under heavy RX pressure, the MAC interrupt (which includes RBUE) was observed firing 1,821,811,555 times against only 2,618,627 actual RX completions - a ~695x ratio - confirming the severity of the storm. RBUE does not provide OOM recovery. If page_pool is exhausted, stmmac_rx_refill() cannot advance the DMA tail pointer, the DMA stays suspended, and RBUE fires again on the next NAPI completion - a storm with no forward progress. This patch trades that storm for a clean stall with the same RX outcome. Proper OOM recovery is a pre-existing gap outside the scope of this fix. Note: as a consequence of disabling RBUE, the rx_buf_unav_irq ethtool counter will always read 0 on XGMAC2 devices. This behaviour is already inconsistent across DWMAC core versions. Remove RBUE from XGMAC_DMA_INT_DEFAULT_EN and XGMAC_DMA_INT_DEFAULT_RX to prevent the interrupt storm while keeping normal RX handling intact.
References
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/0b1a5d3647ce07c27a9fffefc11a8cbf7d7b25ce
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/87e2826ed2058747ddf014c082569a46bfadd96b
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/d3265c19b35d036bba327b36b5366bee76b0157c
Impacted products
Vendor Product Version
To clipboard 

{
  "affected": [
    {
      "affectedData": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "0b1a5d3647ce07c27a9fffefc11a8cbf7d7b25ce",
              "status": "affected",
              "version": "d6ddfacd95c79d43465d4a85dffb1c9beca343a9",
              "versionType": "git"
            },
            {
              "lessThan": "87e2826ed2058747ddf014c082569a46bfadd96b",
              "status": "affected",
              "version": "d6ddfacd95c79d43465d4a85dffb1c9beca343a9",
              "versionType": "git"
            },
            {
              "lessThan": "d3265c19b35d036bba327b36b5366bee76b0157c",
              "status": "affected",
              "version": "d6ddfacd95c79d43465d4a85dffb1c9beca343a9",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "4.19"
            },
            {
              "lessThan": "4.19",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.12.*",
              "status": "unaffected",
              "version": "6.12.111",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.18.*",
              "status": "unaffected",
              "version": "6.18.53",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "7.2",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    }
  ],
  "cveTags": [],
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnet: stmmac: xgmac2: disable RBUE in default RX interrupt mask\n\nEnabling the RX Buffer Unavailable (RBUE) interrupt is counterproductive\nand can trigger a MAC interrupt storm under heavy RX pressure. When the\nDMA runs out of RX descriptors it fires RBUE continuously until software\nrefills the ring.\n\nHowever, RBUE is redundant: the normal RX completion interrupt (RIE)\nalready triggers NAPI, which processes completed descriptors and refills\nthe ring, causing the DMA to resume. The RBUE handler itself only sets\nhandle_rx - the same outcome as RIE.\n\nOn Agilex5 under heavy RX pressure, the MAC interrupt (which includes\nRBUE) was observed firing 1,821,811,555 times against only 2,618,627\nactual RX completions - a ~695x ratio - confirming the severity of the\nstorm.\n\nRBUE does not provide OOM recovery. If page_pool is exhausted,\nstmmac_rx_refill() cannot advance the DMA tail pointer, the DMA stays\nsuspended, and RBUE fires again on the next NAPI completion - a storm\nwith no forward progress. This patch trades that storm for a clean\nstall with the same RX outcome. Proper OOM recovery is a pre-existing\ngap outside the scope of this fix.\n\nNote: as a consequence of disabling RBUE, the rx_buf_unav_irq ethtool\ncounter will always read 0 on XGMAC2 devices. This behaviour is already\ninconsistent across DWMAC core versions.\n\nRemove RBUE from XGMAC_DMA_INT_DEFAULT_EN and XGMAC_DMA_INT_DEFAULT_RX\nto prevent the interrupt storm while keeping normal RX handling intact."
    }
  ],
  "id": "CVE-2026-93830",
  "lastModified": "2026-09-25T13:17:23.817",
  "metrics": {
    "cvssMetricV31": [
      {
        "cvssData": {
          "attackComplexity": "LOW",
          "attackVector": "NETWORK",
          "availabilityImpact": "HIGH",
          "baseScore": 7.5,
          "baseSeverity": "HIGH",
          "confidentialityImpact": "NONE",
          "integrityImpact": "NONE",
          "privilegesRequired": "NONE",
          "scope": "UNCHANGED",
          "userInteraction": "NONE",
          "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
          "version": "3.1"
        },
        "exploitabilityScore": 3.9,
        "impactScore": 3.6,
        "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "type": "Secondary"
      }
    ]
  },
  "published": "2026-09-24T17:17:16.740",
  "references": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "url": "https://git.kernel.org/stable/c/0b1a5d3647ce07c27a9fffefc11a8cbf7d7b25ce"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "url": "https://git.kernel.org/stable/c/87e2826ed2058747ddf014c082569a46bfadd96b"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "url": "https://git.kernel.org/stable/c/d3265c19b35d036bba327b36b5366bee76b0157c"
    }
  ],
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
  "vulnStatus": "Received"
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.





Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.



Related by attack behaviour

Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.