github - ghsa-4xhc-3779-5pc3

ghsa-4xhc-3779-5pc3

Vulnerability from github

Published

2023-01-13 00:30

Modified

2023-01-24 18:30

Severity ?

5.5 (Medium) - CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Details

An Unchecked Input for Loop Condition vulnerability in a NAT library of Juniper Networks Junos OS allows a local authenticated attacker with low privileges to cause a Denial of Service (DoS). When an inconsistent "deterministic NAT" configuration is present on an SRX, or MX with SPC3 and then a specific CLI command is issued the SPC will crash and restart. Repeated execution of this command will lead to a sustained DoS. Such a configuration is characterized by the total number of port blocks being greater than the total number of hosts. An example for such configuration is: [ services nat source pool TEST-POOL address x.x.x.0/32 to x.x.x.15/32 ] [ services nat source pool TEST-POOL port deterministic block-size 1008 ] [ services nat source pool TEST-POOL port deterministic host address y.y.y.0/24] [ services nat source pool TEST-POOL port deterministic include-boundary-addresses] where according to the following calculation: 65536-1024=64512 (number of usable ports per IP address, implicit) 64512/1008=64 (number of port blocks per Nat IP) x.x.x.0/32 to x.x.x.15/32 = 16 (NAT IP addresses available in NAT pool) total port blocks in NAT Pool = 64 blocks per IP * 16 IPs = 1024 Port blocks host address y.y.y.0/24 = 256 hosts (with include-boundary-addresses) If the port block size is configured to be 4032, then the total port blocks are (64512/4032) * 16 = 256 which is equivalent to the total host addresses of 256, and the issue will not be seen. This issue affects Juniper Networks Junos OS on SRX Series, and MX Series with SPC3: All versions prior to 19.4R3-S10; 20.1 version 20.1R1 and later versions; 20.2 versions prior to 20.2R3-S6; 20.3 versions prior to 20.3R3-S6; 20.4 versions prior to 20.4R3-S5; 21.1 versions prior to 21.1R3-S4; 21.2 versions prior to 21.2R3-S3; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S1; 22.1 versions prior to 22.1R2-S2, 22.1R3; 22.2 versions prior to 22.2R2.

Show details on source website

JSON

To clipboard

{
  "affected": [],
  "aliases": [
    "CVE-2023-22409"
  ],
  "database_specific": {
    "cwe_ids": [
      "CWE-1284"
    ],
    "github_reviewed": false,
    "github_reviewed_at": null,
    "nvd_published_at": "2023-01-13T00:15:00Z",
    "severity": "MODERATE"
  },
  "details": "An Unchecked Input for Loop Condition vulnerability in a NAT library of Juniper Networks Junos OS allows a local authenticated attacker with low privileges to cause a Denial of Service (DoS). When an inconsistent \"deterministic NAT\" configuration is present on an SRX, or MX with SPC3 and then a specific CLI command is issued the SPC will crash and restart. Repeated execution of this command will lead to a sustained DoS. Such a configuration is characterized by the total number of port blocks being greater than the total number of hosts. An example for such configuration is: [ services nat source pool TEST-POOL address x.x.x.0/32 to x.x.x.15/32 ] [ services nat source pool TEST-POOL port deterministic block-size 1008 ] [ services nat source pool TEST-POOL port deterministic host address y.y.y.0/24] [ services nat source pool TEST-POOL port deterministic include-boundary-addresses] where according to the following calculation: 65536-1024=64512 (number of usable ports per IP address, implicit) 64512/1008=64 (number of port blocks per Nat IP) x.x.x.0/32 to x.x.x.15/32 = 16 (NAT IP addresses available in NAT pool) total port blocks in NAT Pool = 64 blocks per IP * 16 IPs = 1024 Port blocks host address y.y.y.0/24 = 256 hosts (with include-boundary-addresses) If the port block size is configured to be 4032, then the total port blocks are (64512/4032) * 16 = 256 which is equivalent to the total host addresses of 256, and the issue will not be seen. This issue affects Juniper Networks Junos OS on SRX Series, and MX Series with SPC3: All versions prior to 19.4R3-S10; 20.1 version 20.1R1 and later versions; 20.2 versions prior to 20.2R3-S6; 20.3 versions prior to 20.3R3-S6; 20.4 versions prior to 20.4R3-S5; 21.1 versions prior to 21.1R3-S4; 21.2 versions prior to 21.2R3-S3; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S1; 22.1 versions prior to 22.1R2-S2, 22.1R3; 22.2 versions prior to 22.2R2.",
  "id": "GHSA-4xhc-3779-5pc3",
  "modified": "2023-01-24T18:30:32Z",
  "published": "2023-01-13T00:30:37Z",
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2023-22409"
    },
    {
      "type": "WEB",
      "url": "https://kb.juniper.net/JSA70205"
    }
  ],
  "schema_version": "1.4.0",
  "severity": [
    {
      "score": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
      "type": "CVSS_V3"
    }
  ]
}

cve-2023-22409

Vulnerability from cvelistv5

Published

2023-01-12 00:00

Modified

2024-08-02 10:07

Severity ?

5.5 (Medium) - CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Summary

Junos OS: SRX Series, MX Series with SPC3: When an inconsistent NAT configuration exists and a specific CLI command is issued the SPC will reboot

References

▼	URL	Tags
	https://kb.juniper.net/JSA70205

Impacted products

▼	Vendor	Product
	Juniper Networks	Junos OS

Show details on NVD website

JSON

To clipboard

{
  "containers": {
    "adp": [
      {
        "providerMetadata": {
          "dateUpdated": "2024-08-02T10:07:06.724Z",
          "orgId": "af854a3a-2127-422b-91ae-364da2661108",
          "shortName": "CVE"
        },
        "references": [
          {
            "tags": [
              "x_transferred"
            ],
            "url": "https://kb.juniper.net/JSA70205"
          }
        ],
        "title": "CVE Program Container"
      }
    ],
    "cna": {
      "affected": [
        {
          "platforms": [
            "SRX Series, MX Series with SPC3"
          ],
          "product": "Junos OS",
          "vendor": "Juniper Networks",
          "versions": [
            {
              "lessThan": "19.4R3-S10",
              "status": "affected",
              "version": "unspecified",
              "versionType": "custom"
            },
            {
              "lessThan": "20.1*",
              "status": "affected",
              "version": "20.1R1",
              "versionType": "custom"
            },
            {
              "lessThan": "20.2R3-S6",
              "status": "affected",
              "version": "20.2",
              "versionType": "custom"
            },
            {
              "lessThan": "20.3R3-S6",
              "status": "affected",
              "version": "20.3",
              "versionType": "custom"
            },
            {
              "lessThan": "20.4R3-S5",
              "status": "affected",
              "version": "20.4",
              "versionType": "custom"
            },
            {
              "lessThan": "21.1R3-S4",
              "status": "affected",
              "version": "21.1",
              "versionType": "custom"
            },
            {
              "lessThan": "21.2R3-S3",
              "status": "affected",
              "version": "21.2",
              "versionType": "custom"
            },
            {
              "lessThan": "21.3R3-S3",
              "status": "affected",
              "version": "21.3",
              "versionType": "custom"
            },
            {
              "lessThan": "21.4R3-S1",
              "status": "affected",
              "version": "21.4",
              "versionType": "custom"
            },
            {
              "lessThan": "22.1R2-S2, 22.1R3",
              "status": "affected",
              "version": "22.1",
              "versionType": "custom"
            },
            {
              "lessThan": "22.2R2",
              "status": "affected",
              "version": "22.2",
              "versionType": "custom"
            }
          ]
        }
      ],
      "datePublic": "2023-01-11T00:00:00",
      "descriptions": [
        {
          "lang": "en",
          "value": "An Unchecked Input for Loop Condition vulnerability in a NAT library of Juniper Networks Junos OS allows a local authenticated attacker with low privileges to cause a Denial of Service (DoS). When an inconsistent \"deterministic NAT\" configuration is present on an SRX, or MX with SPC3 and then a specific CLI command is issued the SPC will crash and restart. Repeated execution of this command will lead to a sustained DoS. Such a configuration is characterized by the total number of port blocks being greater than the total number of hosts. An example for such configuration is: [ services nat source pool TEST-POOL address x.x.x.0/32 to x.x.x.15/32 ] [ services nat source pool TEST-POOL port deterministic block-size 1008 ] [ services nat source pool TEST-POOL port deterministic host address y.y.y.0/24] [ services nat source pool TEST-POOL port deterministic include-boundary-addresses] where according to the following calculation: 65536-1024=64512 (number of usable ports per IP address, implicit) 64512/1008=64 (number of port blocks per Nat IP) x.x.x.0/32 to x.x.x.15/32 = 16 (NAT IP addresses available in NAT pool) total port blocks in NAT Pool = 64 blocks per IP * 16 IPs = 1024 Port blocks host address y.y.y.0/24 = 256 hosts (with include-boundary-addresses) If the port block size is configured to be 4032, then the total port blocks are (64512/4032) * 16 = 256 which is equivalent to the total host addresses of 256, and the issue will not be seen. This issue affects Juniper Networks Junos OS on SRX Series, and MX Series with SPC3: All versions prior to 19.4R3-S10; 20.1 version 20.1R1 and later versions; 20.2 versions prior to 20.2R3-S6; 20.3 versions prior to 20.3R3-S6; 20.4 versions prior to 20.4R3-S5; 21.1 versions prior to 21.1R3-S4; 21.2 versions prior to 21.2R3-S3; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S1; 22.1 versions prior to 22.1R2-S2, 22.1R3; 22.2 versions prior to 22.2R2."
        }
      ],
      "exploits": [
        {
          "lang": "en",
          "value": "Juniper SIRT is not aware of any malicious exploitation of this vulnerability."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "attackComplexity": "LOW",
            "attackVector": "LOCAL",
            "availabilityImpact": "HIGH",
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "LOW",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          }
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "description": "606 Unchecked Input for Loop Condition",
              "lang": "en",
              "type": "text"
            }
          ]
        },
        {
          "descriptions": [
            {
              "description": "Denial of Service (DoS)",
              "lang": "en",
              "type": "text"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2023-01-12T00:00:00",
        "orgId": "8cbe9d5a-a066-4c94-8978-4b15efeae968",
        "shortName": "juniper"
      },
      "references": [
        {
          "url": "https://kb.juniper.net/JSA70205"
        }
      ],
      "solutions": [
        {
          "lang": "en",
          "value": "The following software releases have been updated to resolve this specific issue: 19.4R3-S10, 20.2R3-S6, 20.3R3-S6, 20.4R3-S5, 21.1R3-S4, 21.2R3-S3, 21.3R3-S3, 21.4R3-S1, 22.1R2-S2, 22.1R3, 22.2R2, 22.3R1, and all subsequent releases.\n"
        }
      ],
      "source": {
        "advisory": "JSA70205",
        "defect": [
          "1656798"
        ],
        "discovery": "USER"
      },
      "title": "Junos OS: SRX Series, MX Series with SPC3: When an inconsistent NAT configuration exists and a specific CLI command is issued the SPC will reboot",
      "workarounds": [
        {
          "lang": "en",
          "value": "Please ensure the deterministic NAT configuration is consistent as shown in the description of the problem section."
        }
      ],
      "x_generator": {
        "engine": "Vulnogram 0.0.9"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "8cbe9d5a-a066-4c94-8978-4b15efeae968",
    "assignerShortName": "juniper",
    "cveId": "CVE-2023-22409",
    "datePublished": "2023-01-12T00:00:00",
    "dateReserved": "2022-12-27T00:00:00",
    "dateUpdated": "2024-08-02T10:07:06.724Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.1"
}

Sightings

Author	Source	Type	Date

Nomenclature

Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
Confirmed: The vulnerability is confirmed from an analyst perspective.
Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
Patched: This vulnerability was successfully patched by the user reporting the sighting.
Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
Not confirmed: The user expresses doubt about the veracity of the vulnerability.
Not patched: This vulnerability was not successfully patched by the user reporting the sighting.

Action not permitted