Vulnerability-Lookup

GHSA-P3Q9-QQP5-6666

Vulnerability from github – Published: 2026-09-16 12:30 – Updated: 2026-09-16 15:31

Details

In the Linux kernel, the following vulnerability has been resolved:

nvme: skip the zoned limits update if the zone info query failed

nvme_query_zone_info() returns either a negative errno or a positive NVMe status code, but nvme_update_ns_info_block() only tests for the negative case:

ret = nvme_query_zone_info(ns, lbaf, &zi);
if (ret < 0)
    goto out;

If the device fails the Identify Namespace (I/O Command Set specific) command, or the Identify Controller command issued by nvme_set_max_append(), the positive status falls through and setup continues with the zero-initialized zone info. nvme_update_zone_info() then marks the queue zoned with chunk_sectors and ns->head->zsze set to zero.

blk_validate_zoned_limits() does not check chunk_sectors, so the limits commit succeeds. blk_revalidate_disk_zones() does reject the zero zone size, but by then the limits are live and nothing rolls them back, so I/O keeps being submitted to a zoned queue with a zero zone size and disk_zone_no() shifts by ilog2(0):

nvme0n1: Invalid non power of two zone size (0) UBSAN: shift-out-of-bounds in include/linux/blkdev.h:747:16 shift exponent -1 is negative disk_zone_no include/linux/blkdev.h:747 [inline] bio_straddles_zones include/linux/blkdev.h:1058 [inline] blk_zone_wplug_handle_write block/blk-zoned.c:1423 [inline] blk_zone_plug_bio.cold+0x25/0x1c8 block/blk-zoned.c:1605 blk_mq_submit_bio+0x18fb/0x2870 block/blk-mq.c:3196 submit_bh_wbc+0x575/0x740 fs/buffer.c:2824 __block_write_full_folio+0x728/0xdd0 fs/buffer.c:1933

Any device, firmware or NVMe-oF target that fails this one command reaches this.

Skip the zoned limits update in that case, and log which of the two things happened: during a revalidation the queue keeps the zone geometry it was last validated with, and on a first scan the namespace is registered without zoned limits, so that it is still available as a handle for admin commands. Neither of the paths in nvme_query_zone_info() that return a positive status logs anything, so the failure would otherwise be silent.

zi.zone_size is an exact indicator: every path that returns a positive status returns before it is assigned, and after that the only failure left is -ENODEV, which the caller already handles.

Found by FuzzNvme.

Severity

7.5 (High)


                  
                    CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

Show details on source website

JSON

To clipboard

{
  "affected": [],
  "aliases": [
    "CVE-2026-89971"
  ],
  "database_specific": {
    "cwe_ids": [],
    "github_reviewed": false,
    "github_reviewed_at": null,
    "nvd_published_at": "2026-09-16T11:17:07Z",
    "severity": "HIGH"
  },
  "details": "In the Linux kernel, the following vulnerability has been resolved:\n\nnvme: skip the zoned limits update if the zone info query failed\n\nnvme_query_zone_info() returns either a negative errno or a positive\nNVMe status code, but nvme_update_ns_info_block() only tests for the\nnegative case:\n\n\tret = nvme_query_zone_info(ns, lbaf, \u0026zi);\n\tif (ret \u003c 0)\n\t\tgoto out;\n\nIf the device fails the Identify Namespace (I/O Command Set specific)\ncommand, or the Identify Controller command issued by\nnvme_set_max_append(), the positive status falls through and setup\ncontinues with the zero-initialized zone info.  nvme_update_zone_info()\nthen marks the queue zoned with chunk_sectors and ns-\u003ehead-\u003ezsze set to\nzero.\n\nblk_validate_zoned_limits() does not check chunk_sectors, so the limits\ncommit succeeds.  blk_revalidate_disk_zones() does reject the zero zone\nsize, but by then the limits are live and nothing rolls them back, so\nI/O keeps being submitted to a zoned queue with a zero zone size and\ndisk_zone_no() shifts by ilog2(0):\n\n  nvme0n1: Invalid non power of two zone size (0)\n  UBSAN: shift-out-of-bounds in include/linux/blkdev.h:747:16\n  shift exponent -1 is negative\n   disk_zone_no include/linux/blkdev.h:747 [inline]\n   bio_straddles_zones include/linux/blkdev.h:1058 [inline]\n   blk_zone_wplug_handle_write block/blk-zoned.c:1423 [inline]\n   blk_zone_plug_bio.cold+0x25/0x1c8 block/blk-zoned.c:1605\n   blk_mq_submit_bio+0x18fb/0x2870 block/blk-mq.c:3196\n   submit_bh_wbc+0x575/0x740 fs/buffer.c:2824\n   __block_write_full_folio+0x728/0xdd0 fs/buffer.c:1933\n\nAny device, firmware or NVMe-oF target that fails this one command\nreaches this.\n\nSkip the zoned limits update in that case, and log which of the two\nthings happened: during a revalidation the queue keeps the zone\ngeometry it was last validated with, and on a first scan the namespace\nis registered without zoned limits, so that it is still available as a\nhandle for admin commands.  Neither of the paths in\nnvme_query_zone_info() that return a positive status logs anything, so\nthe failure would otherwise be silent.\n\nzi.zone_size is an exact indicator: every path that returns a positive\nstatus returns before it is assigned, and after that the only failure\nleft is -ENODEV, which the caller already handles.\n\nFound by FuzzNvme.",
  "id": "GHSA-p3q9-qqp5-6666",
  "modified": "2026-09-16T15:31:03Z",
  "published": "2026-09-16T12:30:43Z",
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-89971"
    },
    {
      "type": "WEB",
      "url": "https://git.kernel.org/stable/c/3838e80fcfb32e62baffb63c6dc0a60153665a4d"
    },
    {
      "type": "WEB",
      "url": "https://git.kernel.org/stable/c/7fad53ae2052a2b4fc7ca567d6555bdb1176ba35"
    },
    {
      "type": "WEB",
      "url": "https://git.kernel.org/stable/c/bb6dafa79040357cf5043836e1db108c2af8b1e1"
    }
  ],
  "schema_version": "1.4.0",
  "severity": [
    {
      "score": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
      "type": "CVSS_V3"
    }
  ]
}

CVE-2026-89971 (GCVE-0-2026-89971)

Vulnerability from cvelistv5 – Published: 2026-09-16 10:32 – Updated: 2026-09-16 14:40

Title

nvme: skip the zoned limits update if the zone info query failed

Summary

In the Linux kernel, the following vulnerability has been resolved: nvme: skip the zoned limits update if the zone info query failed nvme_query_zone_info() returns either a negative errno or a positive NVMe status code, but nvme_update_ns_info_block() only tests for the negative case: ret = nvme_query_zone_info(ns, lbaf, &zi); if (ret < 0) goto out; If the device fails the Identify Namespace (I/O Command Set specific) command, or the Identify Controller command issued by nvme_set_max_append(), the positive status falls through and setup continues with the zero-initialized zone info. nvme_update_zone_info() then marks the queue zoned with chunk_sectors and ns->head->zsze set to zero. blk_validate_zoned_limits() does not check chunk_sectors, so the limits commit succeeds. blk_revalidate_disk_zones() does reject the zero zone size, but by then the limits are live and nothing rolls them back, so I/O keeps being submitted to a zoned queue with a zero zone size and disk_zone_no() shifts by ilog2(0): nvme0n1: Invalid non power of two zone size (0) UBSAN: shift-out-of-bounds in include/linux/blkdev.h:747:16 shift exponent -1 is negative disk_zone_no include/linux/blkdev.h:747 [inline] bio_straddles_zones include/linux/blkdev.h:1058 [inline] blk_zone_wplug_handle_write block/blk-zoned.c:1423 [inline] blk_zone_plug_bio.cold+0x25/0x1c8 block/blk-zoned.c:1605 blk_mq_submit_bio+0x18fb/0x2870 block/blk-mq.c:3196 submit_bh_wbc+0x575/0x740 fs/buffer.c:2824 __block_write_full_folio+0x728/0xdd0 fs/buffer.c:1933 Any device, firmware or NVMe-oF target that fails this one command reaches this. Skip the zoned limits update in that case, and log which of the two things happened: during a revalidation the queue keeps the zone geometry it was last validated with, and on a first scan the namespace is registered without zoned limits, so that it is still available as a handle for admin commands. Neither of the paths in nvme_query_zone_info() that return a positive status logs anything, so the failure would otherwise be silent. zi.zone_size is an exact indicator: every path that returns a positive status returns before it is assigned, and after that the only failure left is -ENODEV, which the caller already handles. Found by FuzzNvme.

Severity

7.5 (High)


                        
                          CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

Assigner

Linux mitre root

References

3 references

URL	Tags
https://git.kernel.org/stable/c/7fad53ae2052a2b4f…
https://git.kernel.org/stable/c/bb6dafa79040357cf…
https://git.kernel.org/stable/c/3838e80fcfb32e62b…

Impacted products

2 products

Vendor	Product	Version
Linux	Linux	Affected: c85c9ab926a592e2f59f7d9a6ca7d6562843d8fa , < 7fad53ae2052a2b4fc7ca567d6555bdb1176ba35 (git) Affected: c85c9ab926a592e2f59f7d9a6ca7d6562843d8fa , < bb6dafa79040357cf5043836e1db108c2af8b1e1 (git) Affected: c85c9ab926a592e2f59f7d9a6ca7d6562843d8fa , < 3838e80fcfb32e62baffb63c6dc0a60153665a4d (git)
Linux	Linux	Affected: 6.9 Unaffected: 0 , < 6.9 (semver) Unaffected: 6.18.52 , ≤ 6.18.* (semver) Unaffected: 7.2.5 , ≤ 7.2.* (semver) Unaffected: 7.3-rc2 , ≤ * (original_commit_for_fix)

Show details on NVD website

JSON

To clipboard

{
  "containers": {
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "drivers/nvme/host/core.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "7fad53ae2052a2b4fc7ca567d6555bdb1176ba35",
              "status": "affected",
              "version": "c85c9ab926a592e2f59f7d9a6ca7d6562843d8fa",
              "versionType": "git"
            },
            {
              "lessThan": "bb6dafa79040357cf5043836e1db108c2af8b1e1",
              "status": "affected",
              "version": "c85c9ab926a592e2f59f7d9a6ca7d6562843d8fa",
              "versionType": "git"
            },
            {
              "lessThan": "3838e80fcfb32e62baffb63c6dc0a60153665a4d",
              "status": "affected",
              "version": "c85c9ab926a592e2f59f7d9a6ca7d6562843d8fa",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "drivers/nvme/host/core.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "6.9"
            },
            {
              "lessThan": "6.9",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.18.*",
              "status": "unaffected",
              "version": "6.18.52",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "7.2.*",
              "status": "unaffected",
              "version": "7.2.5",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "7.3-rc2",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.18.52",
                  "versionStartIncluding": "6.9",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.2.5",
                  "versionStartIncluding": "6.9",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.3-rc2",
                  "versionStartIncluding": "6.9",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnvme: skip the zoned limits update if the zone info query failed\n\nnvme_query_zone_info() returns either a negative errno or a positive\nNVMe status code, but nvme_update_ns_info_block() only tests for the\nnegative case:\n\n\tret = nvme_query_zone_info(ns, lbaf, \u0026zi);\n\tif (ret \u003c 0)\n\t\tgoto out;\n\nIf the device fails the Identify Namespace (I/O Command Set specific)\ncommand, or the Identify Controller command issued by\nnvme_set_max_append(), the positive status falls through and setup\ncontinues with the zero-initialized zone info.  nvme_update_zone_info()\nthen marks the queue zoned with chunk_sectors and ns-\u003ehead-\u003ezsze set to\nzero.\n\nblk_validate_zoned_limits() does not check chunk_sectors, so the limits\ncommit succeeds.  blk_revalidate_disk_zones() does reject the zero zone\nsize, but by then the limits are live and nothing rolls them back, so\nI/O keeps being submitted to a zoned queue with a zero zone size and\ndisk_zone_no() shifts by ilog2(0):\n\n  nvme0n1: Invalid non power of two zone size (0)\n  UBSAN: shift-out-of-bounds in include/linux/blkdev.h:747:16\n  shift exponent -1 is negative\n   disk_zone_no include/linux/blkdev.h:747 [inline]\n   bio_straddles_zones include/linux/blkdev.h:1058 [inline]\n   blk_zone_wplug_handle_write block/blk-zoned.c:1423 [inline]\n   blk_zone_plug_bio.cold+0x25/0x1c8 block/blk-zoned.c:1605\n   blk_mq_submit_bio+0x18fb/0x2870 block/blk-mq.c:3196\n   submit_bh_wbc+0x575/0x740 fs/buffer.c:2824\n   __block_write_full_folio+0x728/0xdd0 fs/buffer.c:1933\n\nAny device, firmware or NVMe-oF target that fails this one command\nreaches this.\n\nSkip the zoned limits update in that case, and log which of the two\nthings happened: during a revalidation the queue keeps the zone\ngeometry it was last validated with, and on a first scan the namespace\nis registered without zoned limits, so that it is still available as a\nhandle for admin commands.  Neither of the paths in\nnvme_query_zone_info() that return a positive status logs anything, so\nthe failure would otherwise be silent.\n\nzi.zone_size is an exact indicator: every path that returns a positive\nstatus returns before it is assigned, and after that the only failure\nleft is -ENODEV, which the caller already handles.\n\nFound by FuzzNvme."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "scenarios": [
            {
              "lang": "en",
              "value": "AV:N - The NVMe host core parses Identify responses during namespace scan for PCIe and NVMe-oF (nvme-tcp/rdma/fc). A malicious or compromised NVMe-oF target over routable TCP (typically 4420) can fail the ZNS Identify command and trigger the bug from the network.\nAC:L - A malicious controller only needs to report CSI=ZNS then return a positive NVMe status on Identify CSI-NS or Identify CSI-CTRL; nvme_update_ns_info_block() treats that as success and installs zero zone geometry with no race or victim-specific layout.\nPR:N - The attacker is the connected NVMe-oF peer and needs no host account or capability. NVMe/TCP TLS and DH-HMAC-CHAP are optional and off by default, matching prior NVMe-oF host CNA scoring as PR:N.\nUI:N - Namespace scan and AEN Notice Namespace Changed rescans run in nvme_wq once a controller exists, including nvmf-autoconnect. Partition probe and filesystem writeback then submit I/O that hits disk_zone_no with no extra victim action at exploit time.\nS:U - The invalid zoned limits and UBSAN shift occur in the host kernel block layer. This is not a VM escape, IOMMU bypass, or other cross-authority boundary.\nC:N - The flaw leaves zi zero-initialized and later does sector \u003e\u003e ilog2(0) in disk_zone_no. That is an undefined shift, not an out-of-bounds read, use-after-free, or other kernel memory disclosure primitive.\nI:N - nvme_update_zone_info() only programs this queue\u0027s chunk_sectors and zsze to zero from uncleared zi. There is no out-of-bounds write, use-after-free, or attacker-controlled write/control-flow hijack primitive.\nA:H - FuzzNvme reproduced UBSAN shift-out-of-bounds in disk_zone_no on live I/O after zoned limits committed with zone size 0. CONFIG_UBSAN_TRAP and panic_on_warn panic the host, which kernel CNA guidance scores as high availability."
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-09-16T14:40:51.265Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/7fad53ae2052a2b4fc7ca567d6555bdb1176ba35"
        },
        {
          "url": "https://git.kernel.org/stable/c/bb6dafa79040357cf5043836e1db108c2af8b1e1"
        },
        {
          "url": "https://git.kernel.org/stable/c/3838e80fcfb32e62baffb63c6dc0a60153665a4d"
        }
      ],
      "title": "nvme: skip the zoned limits update if the zone info query failed",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2026-89971",
    "datePublished": "2026-09-16T10:32:50.995Z",
    "dateReserved": "2026-09-11T19:38:34.778Z",
    "dateUpdated": "2026-09-16T14:40:51.265Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}

Sightings

Author	Source	Type	Date	Other

Nomenclature

Seen: The vulnerability was mentioned, discussed, or observed by the user.
Confirmed: The vulnerability has been validated from an analyst's perspective.
Published Proof of Concept: A public proof of concept is available for this vulnerability.
Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
Not confirmed: The user expressed doubt about the validity of the vulnerability.
Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.

Detection rules are retrieved from Rulezet.

The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base model, served locally by ML-Gateway. They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.

Related by attack behaviour

Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.