github - ghsa-v36f-cm3w-p7vq

GHSA-V36F-CM3W-P7VQ

Vulnerability from github – Published: 2025-10-04 18:31 – Updated: 2025-10-04 18:31

Details

In the Linux kernel, the following vulnerability has been resolved:

RDMA/rxe: Fix incomplete state save in rxe_requester

If a send packet is dropped by the IP layer in rxe_requester() the call to rxe_xmit_packet() can fail with err == -EAGAIN. To recover, the state of the wqe is restored to the state before the packet was sent so it can be resent. However, the routines that save and restore the state miss a significnt part of the variable state in the wqe, the dma struct which is used to process through the sge table. And, the state is not saved before the packet is built which modifies the dma struct.

Under heavy stress testing with many QPs on a fast node sending large messages to a slow node dropped packets are observed and the resent packets are corrupted because the dma struct was not restored. This patch fixes this behavior and allows the test cases to succeed.

Show details on source website

JSON

To clipboard

{
  "affected": [],
  "aliases": [
    "CVE-2023-53539"
  ],
  "database_specific": {
    "cwe_ids": [],
    "github_reviewed": false,
    "github_reviewed_at": null,
    "nvd_published_at": "2025-10-04T16:15:48Z",
    "severity": null
  },
  "details": "In the Linux kernel, the following vulnerability has been resolved:\n\nRDMA/rxe: Fix incomplete state save in rxe_requester\n\nIf a send packet is dropped by the IP layer in rxe_requester()\nthe call to rxe_xmit_packet() can fail with err == -EAGAIN.\nTo recover, the state of the wqe is restored to the state before\nthe packet was sent so it can be resent. However, the routines\nthat save and restore the state miss a significnt part of the\nvariable state in the wqe, the dma struct which is used to process\nthrough the sge table. And, the state is not saved before the packet\nis built which modifies the dma struct.\n\nUnder heavy stress testing with many QPs on a fast node sending\nlarge messages to a slow node dropped packets are observed and\nthe resent packets are corrupted because the dma struct was not\nrestored. This patch fixes this behavior and allows the test cases\nto succeed.",
  "id": "GHSA-v36f-cm3w-p7vq",
  "modified": "2025-10-04T18:31:14Z",
  "published": "2025-10-04T18:31:14Z",
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2023-53539"
    },
    {
      "type": "WEB",
      "url": "https://git.kernel.org/stable/c/255c0e60e1d16874fc151358d94bc8df661600dd"
    },
    {
      "type": "WEB",
      "url": "https://git.kernel.org/stable/c/2f2a6422287fe29f9343247d77b645100ece0652"
    },
    {
      "type": "WEB",
      "url": "https://git.kernel.org/stable/c/5d122db2ff80cd2aed4dcd630befb56b51ddf947"
    },
    {
      "type": "WEB",
      "url": "https://git.kernel.org/stable/c/70518f3aaf5a059b691867d7d2d46b999319656a"
    }
  ],
  "schema_version": "1.4.0",
  "severity": []
}

CVE-2023-53539 (GCVE-0-2023-53539)

Vulnerability from cvelistv5 – Published: 2025-10-04 15:16 – Updated: 2025-10-04 15:16

Summary

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix incomplete state save in rxe_requester If a send packet is dropped by the IP layer in rxe_requester() the call to rxe_xmit_packet() can fail with err == -EAGAIN. To recover, the state of the wqe is restored to the state before the packet was sent so it can be resent. However, the routines that save and restore the state miss a significnt part of the variable state in the wqe, the dma struct which is used to process through the sge table. And, the state is not saved before the packet is built which modifies the dma struct. Under heavy stress testing with many QPs on a fast node sending large messages to a slow node dropped packets are observed and the resent packets are corrupted because the dma struct was not restored. This patch fixes this behavior and allows the test cases to succeed.

Severity ?

No CVSS data available.

Assigner

Linux

References

URL

Tags

	https://git.kernel.org/stable/c/70518f3aaf5a059b6…
	https://git.kernel.org/stable/c/2f2a6422287fe29f9…
	https://git.kernel.org/stable/c/255c0e60e1d16874f…
	https://git.kernel.org/stable/c/5d122db2ff80cd2ae…

Impacted products

Vendor

Product

Version

Linux

Affected: 3050b99850247695cb07a5c15265afcc08bcf400 , < 70518f3aaf5a059b691867d7d2d46b999319656a (git)
Affected: 3050b99850247695cb07a5c15265afcc08bcf400 , < 2f2a6422287fe29f9343247d77b645100ece0652 (git)
Affected: 3050b99850247695cb07a5c15265afcc08bcf400 , < 255c0e60e1d16874fc151358d94bc8df661600dd (git)
Affected: 3050b99850247695cb07a5c15265afcc08bcf400 , < 5d122db2ff80cd2aed4dcd630befb56b51ddf947 (git)

Linux

Affected: 4.8
Unaffected: 0 , < 4.8 (semver)
Unaffected: 6.1.53 , ≤ 6.1.* (semver)
Unaffected: 6.4.16 , ≤ 6.4.* (semver)
Unaffected: 6.5.3 , ≤ 6.5.* (semver)
Unaffected: 6.6 , ≤ * (original_commit_for_fix)

Show details on NVD website

JSON

To clipboard

{
  "containers": {
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "drivers/infiniband/sw/rxe/rxe_req.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "70518f3aaf5a059b691867d7d2d46b999319656a",
              "status": "affected",
              "version": "3050b99850247695cb07a5c15265afcc08bcf400",
              "versionType": "git"
            },
            {
              "lessThan": "2f2a6422287fe29f9343247d77b645100ece0652",
              "status": "affected",
              "version": "3050b99850247695cb07a5c15265afcc08bcf400",
              "versionType": "git"
            },
            {
              "lessThan": "255c0e60e1d16874fc151358d94bc8df661600dd",
              "status": "affected",
              "version": "3050b99850247695cb07a5c15265afcc08bcf400",
              "versionType": "git"
            },
            {
              "lessThan": "5d122db2ff80cd2aed4dcd630befb56b51ddf947",
              "status": "affected",
              "version": "3050b99850247695cb07a5c15265afcc08bcf400",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "drivers/infiniband/sw/rxe/rxe_req.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "4.8"
            },
            {
              "lessThan": "4.8",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.1.*",
              "status": "unaffected",
              "version": "6.1.53",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.4.*",
              "status": "unaffected",
              "version": "6.4.16",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.5.*",
              "status": "unaffected",
              "version": "6.5.3",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "6.6",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.1.53",
                  "versionStartIncluding": "4.8",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.4.16",
                  "versionStartIncluding": "4.8",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.5.3",
                  "versionStartIncluding": "4.8",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.6",
                  "versionStartIncluding": "4.8",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nRDMA/rxe: Fix incomplete state save in rxe_requester\n\nIf a send packet is dropped by the IP layer in rxe_requester()\nthe call to rxe_xmit_packet() can fail with err == -EAGAIN.\nTo recover, the state of the wqe is restored to the state before\nthe packet was sent so it can be resent. However, the routines\nthat save and restore the state miss a significnt part of the\nvariable state in the wqe, the dma struct which is used to process\nthrough the sge table. And, the state is not saved before the packet\nis built which modifies the dma struct.\n\nUnder heavy stress testing with many QPs on a fast node sending\nlarge messages to a slow node dropped packets are observed and\nthe resent packets are corrupted because the dma struct was not\nrestored. This patch fixes this behavior and allows the test cases\nto succeed."
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2025-10-04T15:16:49.379Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/70518f3aaf5a059b691867d7d2d46b999319656a"
        },
        {
          "url": "https://git.kernel.org/stable/c/2f2a6422287fe29f9343247d77b645100ece0652"
        },
        {
          "url": "https://git.kernel.org/stable/c/255c0e60e1d16874fc151358d94bc8df661600dd"
        },
        {
          "url": "https://git.kernel.org/stable/c/5d122db2ff80cd2aed4dcd630befb56b51ddf947"
        }
      ],
      "title": "RDMA/rxe: Fix incomplete state save in rxe_requester",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2023-53539",
    "datePublished": "2025-10-04T15:16:49.379Z",
    "dateReserved": "2025-10-04T15:14:15.919Z",
    "dateUpdated": "2025-10-04T15:16:49.379Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.1"
}

Sightings

Author	Source	Type	Date

Nomenclature

Seen: The vulnerability was mentioned, discussed, or observed by the user.
Confirmed: The vulnerability has been validated from an analyst's perspective.
Published Proof of Concept: A public proof of concept is available for this vulnerability.
Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
Not confirmed: The user expressed doubt about the validity of the vulnerability.
Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.

Detection rules are retrieved from Rulezet.

Action not permitted

GHSA-V36F-CM3W-P7VQ

CVE-2023-53539 (GCVE-0-2023-53539)

Tags

Sightings

Nomenclature