gsd-2021-47065
Vulnerability from gsd
Modified
2024-03-01 06:04
Details
In the Linux kernel, the following vulnerability has been resolved: rtw88: Fix array overrun in rtw_get_tx_power_params() Using a kernel with the Undefined Behaviour Sanity Checker (UBSAN) enabled, the following array overrun is logged: ================================================================================ UBSAN: array-index-out-of-bounds in /home/finger/wireless-drivers-next/drivers/net/wireless/realtek/rtw88/phy.c:1789:34 index 5 is out of range for type 'u8 [5]' CPU: 2 PID: 84 Comm: kworker/u16:3 Tainted: G O 5.12.0-rc5-00086-gd88bba47038e-dirty #651 Hardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.50 09/29/2014 Workqueue: phy0 ieee80211_scan_work [mac80211] Call Trace: dump_stack+0x64/0x7c ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds.cold+0x43/0x48 rtw_get_tx_power_params+0x83a/drivers/net/wireless/realtek/rtw88/0xad0 [rtw_core] ? rtw_pci_read16+0x20/0x20 [rtw_pci] ? check_hw_ready+0x50/0x90 [rtw_core] rtw_phy_get_tx_power_index+0x4d/0xd0 [rtw_core] rtw_phy_set_tx_power_level+0xee/0x1b0 [rtw_core] rtw_set_channel+0xab/0x110 [rtw_core] rtw_ops_config+0x87/0xc0 [rtw_core] ieee80211_hw_config+0x9d/0x130 [mac80211] ieee80211_scan_state_set_channel+0x81/0x170 [mac80211] ieee80211_scan_work+0x19f/0x2a0 [mac80211] process_one_work+0x1dd/0x3a0 worker_thread+0x49/0x330 ? rescuer_thread+0x3a0/0x3a0 kthread+0x134/0x150 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x22/0x30 ================================================================================ The statement where an array is being overrun is shown in the following snippet: if (rate <= DESC_RATE11M) tx_power = pwr_idx_2g->cck_base[group]; else ====> tx_power = pwr_idx_2g->bw40_base[group]; The associated arrays are defined in main.h as follows: struct rtw_2g_txpwr_idx { u8 cck_base[6]; u8 bw40_base[5]; struct rtw_2g_1s_pwr_idx_diff ht_1s_diff; struct rtw_2g_ns_pwr_idx_diff ht_2s_diff; struct rtw_2g_ns_pwr_idx_diff ht_3s_diff; struct rtw_2g_ns_pwr_idx_diff ht_4s_diff; }; The problem arises because the value of group is 5 for channel 14. The trivial increase in the dimension of bw40_base fails as this struct must match the layout of efuse. The fix is to add the rate as an argument to rtw_get_channel_group() and set the group for channel 14 to 4 if rate <= DESC_RATE11M. This patch fixes commit fa6dfe6bff24 ("rtw88: resolve order of tx power setting routines")
Aliases



{
  "gsd": {
    "metadata": {
      "exploitCode": "unknown",
      "remediation": "unknown",
      "reportConfidence": "confirmed",
      "type": "vulnerability"
    },
    "osvSchema": {
      "aliases": [
        "CVE-2021-47065"
      ],
      "details": "In the Linux kernel, the following vulnerability has been resolved:\n\nrtw88: Fix array overrun in rtw_get_tx_power_params()\n\nUsing a kernel with the Undefined Behaviour Sanity Checker (UBSAN) enabled, the\nfollowing array overrun is logged:\n\n================================================================================\nUBSAN: array-index-out-of-bounds in /home/finger/wireless-drivers-next/drivers/net/wireless/realtek/rtw88/phy.c:1789:34\nindex 5 is out of range for type \u0027u8 [5]\u0027\nCPU: 2 PID: 84 Comm: kworker/u16:3 Tainted: G           O      5.12.0-rc5-00086-gd88bba47038e-dirty #651\nHardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.50   09/29/2014\nWorkqueue: phy0 ieee80211_scan_work [mac80211]\nCall Trace:\n dump_stack+0x64/0x7c\n ubsan_epilogue+0x5/0x40\n __ubsan_handle_out_of_bounds.cold+0x43/0x48\n rtw_get_tx_power_params+0x83a/drivers/net/wireless/realtek/rtw88/0xad0 [rtw_core]\n ? rtw_pci_read16+0x20/0x20 [rtw_pci]\n ? check_hw_ready+0x50/0x90 [rtw_core]\n rtw_phy_get_tx_power_index+0x4d/0xd0 [rtw_core]\n rtw_phy_set_tx_power_level+0xee/0x1b0 [rtw_core]\n rtw_set_channel+0xab/0x110 [rtw_core]\n rtw_ops_config+0x87/0xc0 [rtw_core]\n ieee80211_hw_config+0x9d/0x130 [mac80211]\n ieee80211_scan_state_set_channel+0x81/0x170 [mac80211]\n ieee80211_scan_work+0x19f/0x2a0 [mac80211]\n process_one_work+0x1dd/0x3a0\n worker_thread+0x49/0x330\n ? rescuer_thread+0x3a0/0x3a0\n kthread+0x134/0x150\n ? kthread_create_worker_on_cpu+0x70/0x70\n ret_from_fork+0x22/0x30\n================================================================================\n\nThe statement where an array is being overrun is shown in the following snippet:\n\n\tif (rate \u003c= DESC_RATE11M)\n\t\ttx_power = pwr_idx_2g-\u003ecck_base[group];\n\telse\n====\u003e\t\ttx_power = pwr_idx_2g-\u003ebw40_base[group];\n\nThe associated arrays are defined in main.h as follows:\n\nstruct rtw_2g_txpwr_idx {\n\tu8 cck_base[6];\n\tu8 bw40_base[5];\n\tstruct rtw_2g_1s_pwr_idx_diff ht_1s_diff;\n\tstruct rtw_2g_ns_pwr_idx_diff ht_2s_diff;\n\tstruct rtw_2g_ns_pwr_idx_diff ht_3s_diff;\n\tstruct rtw_2g_ns_pwr_idx_diff ht_4s_diff;\n};\n\nThe problem arises because the value of group is 5 for channel 14. The trivial\nincrease in the dimension of bw40_base fails as this struct must match the layout of\nefuse. The fix is to add the rate as an argument to rtw_get_channel_group() and set\nthe group for channel 14 to 4 if rate \u003c= DESC_RATE11M.\n\nThis patch fixes commit fa6dfe6bff24 (\"rtw88: resolve order of tx power setting routines\")",
      "id": "GSD-2021-47065",
      "modified": "2024-03-01T06:04:48.309057Z",
      "schema_version": "1.4.0"
    }
  },
  "namespaces": {
    "cve.org": {
      "CVE_data_meta": {
        "ASSIGNER": "cve@kernel.org",
        "ID": "CVE-2021-47065",
        "STATE": "PUBLIC"
      },
      "affects": {
        "vendor": {
          "vendor_data": [
            {
              "product": {
                "product_data": [
                  {
                    "product_name": "Linux",
                    "version": {
                      "version_data": [
                        {
                          "version_affected": "\u003c",
                          "version_name": "fa6dfe6bff24",
                          "version_value": "6b5aa0cf321c"
                        },
                        {
                          "version_value": "not down converted",
                          "x_cve_json_5_version_data": {
                            "defaultStatus": "affected",
                            "versions": [
                              {
                                "status": "affected",
                                "version": "5.3"
                              },
                              {
                                "lessThan": "5.3",
                                "status": "unaffected",
                                "version": "0",
                                "versionType": "custom"
                              },
                              {
                                "lessThanOrEqual": "5.4.*",
                                "status": "unaffected",
                                "version": "5.4.119",
                                "versionType": "custom"
                              },
                              {
                                "lessThanOrEqual": "5.10.*",
                                "status": "unaffected",
                                "version": "5.10.37",
                                "versionType": "custom"
                              },
                              {
                                "lessThanOrEqual": "5.11.*",
                                "status": "unaffected",
                                "version": "5.11.21",
                                "versionType": "custom"
                              },
                              {
                                "lessThanOrEqual": "5.12.*",
                                "status": "unaffected",
                                "version": "5.12.4",
                                "versionType": "custom"
                              },
                              {
                                "lessThanOrEqual": "*",
                                "status": "unaffected",
                                "version": "5.13",
                                "versionType": "original_commit_for_fix"
                              }
                            ]
                          }
                        }
                      ]
                    }
                  }
                ]
              },
              "vendor_name": "Linux"
            }
          ]
        }
      },
      "data_format": "MITRE",
      "data_type": "CVE",
      "data_version": "4.0",
      "description": {
        "description_data": [
          {
            "lang": "eng",
            "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nrtw88: Fix array overrun in rtw_get_tx_power_params()\n\nUsing a kernel with the Undefined Behaviour Sanity Checker (UBSAN) enabled, the\nfollowing array overrun is logged:\n\n================================================================================\nUBSAN: array-index-out-of-bounds in /home/finger/wireless-drivers-next/drivers/net/wireless/realtek/rtw88/phy.c:1789:34\nindex 5 is out of range for type \u0027u8 [5]\u0027\nCPU: 2 PID: 84 Comm: kworker/u16:3 Tainted: G           O      5.12.0-rc5-00086-gd88bba47038e-dirty #651\nHardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.50   09/29/2014\nWorkqueue: phy0 ieee80211_scan_work [mac80211]\nCall Trace:\n dump_stack+0x64/0x7c\n ubsan_epilogue+0x5/0x40\n __ubsan_handle_out_of_bounds.cold+0x43/0x48\n rtw_get_tx_power_params+0x83a/drivers/net/wireless/realtek/rtw88/0xad0 [rtw_core]\n ? rtw_pci_read16+0x20/0x20 [rtw_pci]\n ? check_hw_ready+0x50/0x90 [rtw_core]\n rtw_phy_get_tx_power_index+0x4d/0xd0 [rtw_core]\n rtw_phy_set_tx_power_level+0xee/0x1b0 [rtw_core]\n rtw_set_channel+0xab/0x110 [rtw_core]\n rtw_ops_config+0x87/0xc0 [rtw_core]\n ieee80211_hw_config+0x9d/0x130 [mac80211]\n ieee80211_scan_state_set_channel+0x81/0x170 [mac80211]\n ieee80211_scan_work+0x19f/0x2a0 [mac80211]\n process_one_work+0x1dd/0x3a0\n worker_thread+0x49/0x330\n ? rescuer_thread+0x3a0/0x3a0\n kthread+0x134/0x150\n ? kthread_create_worker_on_cpu+0x70/0x70\n ret_from_fork+0x22/0x30\n================================================================================\n\nThe statement where an array is being overrun is shown in the following snippet:\n\n\tif (rate \u003c= DESC_RATE11M)\n\t\ttx_power = pwr_idx_2g-\u003ecck_base[group];\n\telse\n====\u003e\t\ttx_power = pwr_idx_2g-\u003ebw40_base[group];\n\nThe associated arrays are defined in main.h as follows:\n\nstruct rtw_2g_txpwr_idx {\n\tu8 cck_base[6];\n\tu8 bw40_base[5];\n\tstruct rtw_2g_1s_pwr_idx_diff ht_1s_diff;\n\tstruct rtw_2g_ns_pwr_idx_diff ht_2s_diff;\n\tstruct rtw_2g_ns_pwr_idx_diff ht_3s_diff;\n\tstruct rtw_2g_ns_pwr_idx_diff ht_4s_diff;\n};\n\nThe problem arises because the value of group is 5 for channel 14. The trivial\nincrease in the dimension of bw40_base fails as this struct must match the layout of\nefuse. The fix is to add the rate as an argument to rtw_get_channel_group() and set\nthe group for channel 14 to 4 if rate \u003c= DESC_RATE11M.\n\nThis patch fixes commit fa6dfe6bff24 (\"rtw88: resolve order of tx power setting routines\")"
          }
        ]
      },
      "generator": {
        "engine": "bippy-4986f5686161"
      },
      "problemtype": {
        "problemtype_data": [
          {
            "description": [
              {
                "lang": "eng",
                "value": "n/a"
              }
            ]
          }
        ]
      },
      "references": {
        "reference_data": [
          {
            "name": "https://git.kernel.org/stable/c/6b5aa0cf321c25f41e09a61c83ee4dc7ab9549cb",
            "refsource": "MISC",
            "url": "https://git.kernel.org/stable/c/6b5aa0cf321c25f41e09a61c83ee4dc7ab9549cb"
          },
          {
            "name": "https://git.kernel.org/stable/c/95fb153c6027924cda3422120169d1890737f3a0",
            "refsource": "MISC",
            "url": "https://git.kernel.org/stable/c/95fb153c6027924cda3422120169d1890737f3a0"
          },
          {
            "name": "https://git.kernel.org/stable/c/5f3dbced8eaa5c9ed7d6943f3fea99f235a6516a",
            "refsource": "MISC",
            "url": "https://git.kernel.org/stable/c/5f3dbced8eaa5c9ed7d6943f3fea99f235a6516a"
          },
          {
            "name": "https://git.kernel.org/stable/c/9cd09722e18a08b6a3d68b8bccfac39ddc22434c",
            "refsource": "MISC",
            "url": "https://git.kernel.org/stable/c/9cd09722e18a08b6a3d68b8bccfac39ddc22434c"
          },
          {
            "name": "https://git.kernel.org/stable/c/2ff25985ea9ccc6c9af2c77b0b49045adcc62e0e",
            "refsource": "MISC",
            "url": "https://git.kernel.org/stable/c/2ff25985ea9ccc6c9af2c77b0b49045adcc62e0e"
          }
        ]
      }
    },
    "nvd.nist.gov": {
      "cve": {
        "descriptions": [
          {
            "lang": "en",
            "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nrtw88: Fix array overrun in rtw_get_tx_power_params()\n\nUsing a kernel with the Undefined Behaviour Sanity Checker (UBSAN) enabled, the\nfollowing array overrun is logged:\n\n================================================================================\nUBSAN: array-index-out-of-bounds in /home/finger/wireless-drivers-next/drivers/net/wireless/realtek/rtw88/phy.c:1789:34\nindex 5 is out of range for type \u0027u8 [5]\u0027\nCPU: 2 PID: 84 Comm: kworker/u16:3 Tainted: G           O      5.12.0-rc5-00086-gd88bba47038e-dirty #651\nHardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.50   09/29/2014\nWorkqueue: phy0 ieee80211_scan_work [mac80211]\nCall Trace:\n dump_stack+0x64/0x7c\n ubsan_epilogue+0x5/0x40\n __ubsan_handle_out_of_bounds.cold+0x43/0x48\n rtw_get_tx_power_params+0x83a/drivers/net/wireless/realtek/rtw88/0xad0 [rtw_core]\n ? rtw_pci_read16+0x20/0x20 [rtw_pci]\n ? check_hw_ready+0x50/0x90 [rtw_core]\n rtw_phy_get_tx_power_index+0x4d/0xd0 [rtw_core]\n rtw_phy_set_tx_power_level+0xee/0x1b0 [rtw_core]\n rtw_set_channel+0xab/0x110 [rtw_core]\n rtw_ops_config+0x87/0xc0 [rtw_core]\n ieee80211_hw_config+0x9d/0x130 [mac80211]\n ieee80211_scan_state_set_channel+0x81/0x170 [mac80211]\n ieee80211_scan_work+0x19f/0x2a0 [mac80211]\n process_one_work+0x1dd/0x3a0\n worker_thread+0x49/0x330\n ? rescuer_thread+0x3a0/0x3a0\n kthread+0x134/0x150\n ? kthread_create_worker_on_cpu+0x70/0x70\n ret_from_fork+0x22/0x30\n================================================================================\n\nThe statement where an array is being overrun is shown in the following snippet:\n\n\tif (rate \u003c= DESC_RATE11M)\n\t\ttx_power = pwr_idx_2g-\u003ecck_base[group];\n\telse\n====\u003e\t\ttx_power = pwr_idx_2g-\u003ebw40_base[group];\n\nThe associated arrays are defined in main.h as follows:\n\nstruct rtw_2g_txpwr_idx {\n\tu8 cck_base[6];\n\tu8 bw40_base[5];\n\tstruct rtw_2g_1s_pwr_idx_diff ht_1s_diff;\n\tstruct rtw_2g_ns_pwr_idx_diff ht_2s_diff;\n\tstruct rtw_2g_ns_pwr_idx_diff ht_3s_diff;\n\tstruct rtw_2g_ns_pwr_idx_diff ht_4s_diff;\n};\n\nThe problem arises because the value of group is 5 for channel 14. The trivial\nincrease in the dimension of bw40_base fails as this struct must match the layout of\nefuse. The fix is to add the rate as an argument to rtw_get_channel_group() and set\nthe group for channel 14 to 4 if rate \u003c= DESC_RATE11M.\n\nThis patch fixes commit fa6dfe6bff24 (\"rtw88: resolve order of tx power setting routines\")"
          },
          {
            "lang": "es",
            "value": "En el kernel de Linux, se resolvi\u00f3 la siguiente vulnerabilidad: rtw88: corrige el desbordamiento de la matriz en rtw_get_tx_power_params() Al utilizar un kernel con el Verificador de estado de comportamiento indefinido (UBSAN) habilitado, se registra el siguiente desbordamiento de la matriz: ======== ==================================================== ====================== UBSAN: \u00edndice de matriz fuera de los l\u00edmites en /home/finger/wireless-drivers-next/drivers/net/wireless /realtek/rtw88/phy.c:1789:34 el \u00edndice 5 est\u00e1 fuera de rango para el tipo \u0027u8 [5]\u0027 CPU: 2 PID: 84 Comm: kworker/u16:3 Tainted: GO 5.12.0-rc5-00086- gd88bba47038e-dirty #651 Nombre del hardware: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS versi\u00f3n 4.50 29/09/2014 Cola de trabajo: phy0 ieee80211_scan_work [mac80211] Seguimiento de llamadas: dump_stack+0x64/0x7c ubsan_epilogue+0x5/0x40 __ubsan _handle_out_of_bounds.cold +0x43/0x48 rtw_get_tx_power_params+0x83a/drivers/net/wireless/realtek/rtw88/0xad0 [rtw_core] ? rtw_pci_read16+0x20/0x20 [rtw_pci] ? check_hw_ready+0x50/0x90 [rtw_core] rtw_phy_get_tx_power_index+0x4d/0xd0 [rtw_core] rtw_phy_set_tx_power_level+0xee/0x1b0 [rtw_core] rtw_set_channel+0xab/0x110 [rtw_core] rtw_ops_config+0x87/0xc 0 [rtw_core] ieee80211_hw_config+0x9d/0x130 [mac80211] ieee80211_scan_state_set_channel+ 0x81/0x170 [mac80211] ieee80211_scan_work+0x19f/0x2a0 [mac80211] Process_one_work+0x1dd/0x3a0 trabajador_thread+0x49/0x330? hilo_rescate+0x3a0/0x3a0 kthread+0x134/0x150 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x22/0x30 ========================================== ========================================= Se muestra la declaraci\u00f3n donde se est\u00e1 invadiendo una matriz en el siguiente fragmento: if (rate \u0026lt;= DESC_RATE11M) tx_power = pwr_idx_2g-\u0026gt;cck_base[group]; else ====\u0026gt; tx_power = pwr_idx_2g-\u0026gt;bw40_base[grupo]; Las matrices asociadas se definen en main.h de la siguiente manera: struct rtw_2g_txpwr_idx { u8 cck_base[6]; u8 bw40_base[5]; estructura rtw_2g_1s_pwr_idx_diff ht_1s_diff; estructura rtw_2g_ns_pwr_idx_diff ht_2s_diff; estructura rtw_2g_ns_pwr_idx_diff ht_3s_diff; estructura rtw_2g_ns_pwr_idx_diff ht_4s_diff; }; El problema surge porque el valor del grupo es 5 para el canal 14. El aumento trivial en la dimensi\u00f3n de bw40_base falla ya que esta estructura debe coincidir con el dise\u00f1o de efuse. La soluci\u00f3n es agregar la tasa como argumento a rtw_get_channel_group() y configurar el grupo para el canal 14 en 4 si la tasa \u0026lt;= DESC_RATE11M. Este parche corrige la confirmaci\u00f3n fa6dfe6bff24 (\"rtw88: resolver el orden de las rutinas de configuraci\u00f3n de energ\u00eda de transmisi\u00f3n\")"
          }
        ],
        "id": "CVE-2021-47065",
        "lastModified": "2024-03-01T14:04:26.010",
        "metrics": {},
        "published": "2024-02-29T23:15:08.000",
        "references": [
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "url": "https://git.kernel.org/stable/c/2ff25985ea9ccc6c9af2c77b0b49045adcc62e0e"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "url": "https://git.kernel.org/stable/c/5f3dbced8eaa5c9ed7d6943f3fea99f235a6516a"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "url": "https://git.kernel.org/stable/c/6b5aa0cf321c25f41e09a61c83ee4dc7ab9549cb"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "url": "https://git.kernel.org/stable/c/95fb153c6027924cda3422120169d1890737f3a0"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "url": "https://git.kernel.org/stable/c/9cd09722e18a08b6a3d68b8bccfac39ddc22434c"
          }
        ],
        "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "vulnStatus": "Awaiting Analysis"
      }
    }
  }
}


Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Sightings

Author Source Type Date

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
  • Confirmed: The vulnerability is confirmed from an analyst perspective.
  • Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
  • Patched: This vulnerability was successfully patched by the user reporting the sighting.
  • Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
  • Not confirmed: The user expresses doubt about the veracity of the vulnerability.
  • Not patched: This vulnerability was not successfully patched by the user reporting the sighting.