GSD-2023-4957

Vulnerability from gsd - Updated: 2023-12-13 01:20
Details
A vulnerability of authentication bypass has been found on a Zebra Technologies ZTC ZT410-203dpi ZPL printer. This vulnerability allows an attacker that is in the same network as the printer, to change the username and password for the Web Page by sending a specially crafted POST request to the setvarsResults.cgi file. For this vulnerability to be exploitable, the printers protected mode must be disabled.
Aliases
Aliases
CVE-2023-4957
To clipboard 

{
  "GSD": {
    "alias": "CVE-2023-4957",
    "id": "GSD-2023-4957"
  },
  "gsd": {
    "metadata": {
      "exploitCode": "unknown",
      "remediation": "unknown",
      "reportConfidence": "confirmed",
      "type": "vulnerability"
    },
    "osvSchema": {
      "aliases": [
        "CVE-2023-4957"
      ],
      "details": " A vulnerability of authentication bypass has been found on a Zebra Technologies ZTC ZT410-203dpi ZPL printer. This vulnerability allows an attacker that is in the same network as the printer, to change the username and password for the Web Page by sending a specially crafted POST request to the setvarsResults.cgi file. For this vulnerability to be exploitable, the printers protected mode must be disabled.",
      "id": "GSD-2023-4957",
      "modified": "2023-12-13T01:20:27.220618Z",
      "schema_version": "1.4.0"
    }
  },
  "namespaces": {
    "cve.org": {
      "CVE_data_meta": {
        "ASSIGNER": "cve-coordination@incibe.es",
        "ID": "CVE-2023-4957",
        "STATE": "PUBLIC"
      },
      "affects": {
        "vendor": {
          "vendor_data": [
            {
              "product": {
                "product_data": [
                  {
                    "product_name": "ZTC ZT410",
                    "version": {
                      "version_data": [
                        {
                          "version_affected": "=",
                          "version_value": "203dpi ZPL 18J150703184"
                        }
                      ]
                    }
                  }
                ]
              },
              "vendor_name": "Zebra Technologies"
            }
          ]
        }
      },
      "credits": [
        {
          "lang": "en",
          "value": "David C\u00e1mara Galindo"
        }
      ],
      "data_format": "MITRE",
      "data_type": "CVE",
      "data_version": "4.0",
      "description": {
        "description_data": [
          {
            "lang": "eng",
            "value": " A vulnerability of authentication bypass has been found on a Zebra Technologies ZTC ZT410-203dpi ZPL printer. This vulnerability allows an attacker that is in the same network as the printer, to change the username and password for the Web Page by sending a specially crafted POST request to the setvarsResults.cgi file. For this vulnerability to be exploitable, the printers protected mode must be disabled."
          }
        ]
      },
      "generator": {
        "engine": "Vulnogram 0.1.0-dev"
      },
      "impact": {
        "cvss": [
          {
            "attackComplexity": "LOW",
            "attackVector": "ADJACENT_NETWORK",
            "availabilityImpact": "NONE",
            "baseScore": 5.4,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "LOW",
            "integrityImpact": "LOW",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N",
            "version": "3.1"
          }
        ]
      },
      "problemtype": {
        "problemtype_data": [
          {
            "description": [
              {
                "cweId": "CWE-288",
                "lang": "eng",
                "value": "CWE-288: Authentication Bypass Using an Alternate Path or Channel"
              }
            ]
          }
        ]
      },
      "references": {
        "reference_data": [
          {
            "name": "https://www.incibe.es/en/incibe-cert/notices/aviso-sci/authentication-bypass-zebra-ztc",
            "refsource": "MISC",
            "url": "https://www.incibe.es/en/incibe-cert/notices/aviso-sci/authentication-bypass-zebra-ztc"
          }
        ]
      },
      "solution": [
        {
          "lang": "en",
          "supportingMedia": [
            {
              "base64": false,
              "type": "text/html",
              "value": "Zebra Printers running Link-OS v6.0 and later have a protected mode that protects the printer from this vulnerability. Activating this mode disables unauthorized changes and locks the current configuration until an administrator authorizes updates. By default, the secure mode is disabled as it is necessary to generate a password first. NOTE: the ZT410 industrial printer was discontinued on Oct 1st, 2020. The service and Support discontinuation dates are in September and December 2025 depending on region. Further information regarding security settings and best practices, including \u201cProtected Mode\u201d, can be found in the references."
            }
          ],
          "value": "Zebra Printers running Link-OS v6.0 and later have a protected mode that protects the printer from this vulnerability. Activating this mode disables unauthorized changes and locks the current configuration until an administrator authorizes updates. By default, the secure mode is disabled as it is necessary to generate a password first. NOTE: the ZT410 industrial printer was discontinued on Oct 1st, 2020. The service and Support discontinuation dates are in September and December 2025 depending on region. Further information regarding security settings and best practices, including \u201cProtected Mode\u201d, can be found in the references."
        }
      ],
      "source": {
        "discovery": "UNKNOWN"
      }
    },
    "nvd.nist.gov": {
      "configurations": {
        "CVE_data_version": "4.0",
        "nodes": [
          {
            "children": [
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:o:zebra:zt410_firmware:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": true
                  }
                ],
                "operator": "OR"
              },
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:h:zebra:zt410:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": false
                  }
                ],
                "operator": "OR"
              }
            ],
            "cpe_match": [],
            "operator": "AND"
          }
        ]
      },
      "cve": {
        "CVE_data_meta": {
          "ASSIGNER": "cve-coordination@incibe.es",
          "ID": "CVE-2023-4957"
        },
        "data_format": "MITRE",
        "data_type": "CVE",
        "data_version": "4.0",
        "description": {
          "description_data": [
            {
              "lang": "en",
              "value": " A vulnerability of authentication bypass has been found on a Zebra Technologies ZTC ZT410-203dpi ZPL printer. This vulnerability allows an attacker that is in the same network as the printer, to change the username and password for the Web Page by sending a specially crafted POST request to the setvarsResults.cgi file. For this vulnerability to be exploitable, the printers protected mode must be disabled."
            }
          ]
        },
        "problemtype": {
          "problemtype_data": [
            {
              "description": [
                {
                  "lang": "en",
                  "value": "CWE-288"
                }
              ]
            }
          ]
        },
        "references": {
          "reference_data": [
            {
              "name": "https://www.incibe.es/en/incibe-cert/notices/aviso-sci/authentication-bypass-zebra-ztc",
              "refsource": "MISC",
              "tags": [
                "Third Party Advisory"
              ],
              "url": "https://www.incibe.es/en/incibe-cert/notices/aviso-sci/authentication-bypass-zebra-ztc"
            }
          ]
        }
      },
      "impact": {
        "baseMetricV3": {
          "cvssV3": {
            "attackComplexity": "LOW",
            "attackVector": "ADJACENT_NETWORK",
            "availabilityImpact": "NONE",
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "LOW",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N",
            "version": "3.1"
          },
          "exploitabilityScore": 2.8,
          "impactScore": 1.4
        }
      },
      "lastModifiedDate": "2023-10-16T14:08Z",
      "publishedDate": "2023-10-11T14:15Z"
    }
  }
}


Log in or create an account to share your comment.




Tags
Taxonomy of the tags.




Sightings

Author Source Type Date

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.



Detection rules are retrieved from Rulezet.