icsa-21-259-01
Vulnerability from csaf_cisa
Published
2021-09-16 00:00
Modified
2021-10-14 00:00
Summary
Siemens RUGGEDCOM ROX (Update A)

Notes

CISA Disclaimer
This CSAF advisory was extracted from unstructured data and may contain inaccuracies. If you notice any errors, please reach out to the designated contact at CISA CSAF: central@cisa.dhs.gov
Legal Notice
All information products included in https://us-cert.cisa.gov/ics are provided "as is" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.
Risk evaluation
Successful exploitation of these vulnerabilities could allow an attacker to gain root access to the affected devices.
Critical infrastructure sectors
Multiple Sectors
Countries/areas deployed
Worldwide
Company headquarters location
Germany
Recommended Practices
CISA recommends users take defensive measures to minimize the risk of exploitation of this vulnerability. Specifically, users should:
Recommended Practices
CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures. CISA also provides a section for control systems security recommended practices on the ICS webpage onus-cert.cisa.gov. Several recommended practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
Recommended Practices
Additional mitigation guidance and recommended practices are publicly available on the ICS webpage on us-cert.cisa.gov in the Technical Information Paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies. Organizations observing any suspected malicious activity should follow their established internal procedures and report their findings to CISA for tracking and correlation against other incidents.
Additional Resources
For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories
Exploitability
No known public exploits specifically target these vulnerabilities.



{
  "document": {
    "acknowledgments": [
      {
        "names": [
          "Michael Messner"
        ],
        "organization": "Siemens Energy",
        "summary": "reporting these vulnerabilities to Siemens"
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited",
      "tlp": {
        "label": "WHITE",
        "url": "https://us-cert.cisa.gov/tlp/"
      }
    },
    "lang": "en-US",
    "notes": [
      {
        "category": "general",
        "text": "This CSAF advisory was extracted from unstructured data and may contain inaccuracies. If you notice any errors, please reach out to the designated contact at CISA CSAF: central@cisa.dhs.gov",
        "title": "CISA Disclaimer"
      },
      {
        "category": "legal_disclaimer",
        "text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
        "title": "Legal Notice"
      },
      {
        "category": "summary",
        "text": "Successful exploitation of these vulnerabilities could allow an attacker to gain root access to the affected devices.",
        "title": "Risk evaluation"
      },
      {
        "category": "other",
        "text": "Multiple Sectors",
        "title": "Critical infrastructure sectors"
      },
      {
        "category": "other",
        "text": "Worldwide",
        "title": "Countries/areas deployed"
      },
      {
        "category": "other",
        "text": "Germany",
        "title": "Company headquarters location"
      },
      {
        "category": "general",
        "text": "CISA recommends users take defensive measures to minimize the risk of exploitation of this vulnerability. Specifically, users should:",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.\nCISA also provides a section for control systems security recommended practices on the ICS webpage onus-cert.cisa.gov. Several recommended practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Additional mitigation guidance and recommended practices are publicly available on the ICS webpage on us-cert.cisa.gov in the Technical Information Paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.\nOrganizations observing any suspected malicious activity should follow their established internal procedures and report their findings to CISA for tracking and correlation against other incidents.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "other",
        "text": "No known public exploits specifically target these vulnerabilities.",
        "title": "Exploitability"
      }
    ],
    "publisher": {
      "category": "coordinator",
      "contact_details": "Email: CISAservicedesk@cisa.dhs.gov;\n Toll Free: 1-888-282-0870",
      "name": "CISA",
      "namespace": "https://www.cisa.gov/"
    },
    "references": [
      {
        "category": "external",
        "summary": "SSA-150692: Multiple Vulnerabilities in RUGGEDCOM ROX - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-150692.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-21-259-01 JSON",
        "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2021/icsa-21-259-01.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-21-259-01 Web Version",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-21-259-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/ics/alerts/ICS-ALERT-10-301-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/ics/tips/ICS-TIP-12-146-01B"
      },
      {
        "category": "external",
        "summary": "SSA-150692: Multiple Vulnerabilities in RUGGEDCOM ROX - PDF Version",
        "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-150692.pdf"
      },
      {
        "category": "external",
        "summary": "SSA-150692: Multiple Vulnerabilities in RUGGEDCOM ROX - TXT Version",
        "url": "https://cert-portal.siemens.com/productcert/txt/ssa-150692.txt"
      }
    ],
    "title": "Siemens RUGGEDCOM ROX (Update A)",
    "tracking": {
      "current_release_date": "2021-10-14T00:00:00.000000Z",
      "generator": {
        "engine": {
          "name": "CISA CSAF Generator",
          "version": "1.0.0"
        }
      },
      "id": "ICSA-21-259-01",
      "initial_release_date": "2021-09-16T00:00:00.000000Z",
      "revision_history": [
        {
          "date": "2021-09-16T00:00:00.000000Z",
          "legacy_version": "Initial",
          "number": "1",
          "summary": "ICSA-21-259-01 Siemens RUGGEDCOM ROX"
        },
        {
          "date": "2021-10-14T00:00:00.000000Z",
          "legacy_version": "A",
          "number": "2",
          "summary": "ICSA-21-259-01 Siemens RUGGEDCOM ROX (Update A)"
        }
      ],
      "status": "final",
      "version": "2"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003c V2.14.1",
                "product": {
                  "name": "RUGGEDCOM ROX MX5000",
                  "product_id": "CSAFPID-0001"
                }
              }
            ],
            "category": "product_name",
            "name": "RUGGEDCOM ROX MX5000"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003c V2.14.1",
                "product": {
                  "name": "RUGGEDCOM ROX RX1400",
                  "product_id": "CSAFPID-0002"
                }
              }
            ],
            "category": "product_name",
            "name": "RUGGEDCOM ROX RX1400"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003c V2.14.1",
                "product": {
                  "name": "RUGGEDCOM ROX RX1500",
                  "product_id": "CSAFPID-0003"
                }
              }
            ],
            "category": "product_name",
            "name": "RUGGEDCOM ROX RX1500"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003c V2.14.1",
                "product": {
                  "name": "RUGGEDCOM ROX RX1501",
                  "product_id": "CSAFPID-0004"
                }
              }
            ],
            "category": "product_name",
            "name": "RUGGEDCOM ROX RX1501"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003c V2.14.1",
                "product": {
                  "name": "RUGGEDCOM ROX RX1510",
                  "product_id": "CSAFPID-0005"
                }
              }
            ],
            "category": "product_name",
            "name": "RUGGEDCOM ROX RX1510"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003c V2.14.1",
                "product": {
                  "name": "RUGGEDCOM ROX RX1511",
                  "product_id": "CSAFPID-0006"
                }
              }
            ],
            "category": "product_name",
            "name": "RUGGEDCOM ROX RX1511"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003c V2.14.1",
                "product": {
                  "name": "RUGGEDCOM ROX RX1512",
                  "product_id": "CSAFPID-0007"
                }
              }
            ],
            "category": "product_name",
            "name": "RUGGEDCOM ROX RX1512"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003c V2.14.1",
                "product": {
                  "name": "RUGGEDCOM ROX RX1524",
                  "product_id": "CSAFPID-0008"
                }
              }
            ],
            "category": "product_name",
            "name": "RUGGEDCOM ROX RX1524"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003c V2.14.1",
                "product": {
                  "name": "RUGGEDCOM ROX RX1536",
                  "product_id": "CSAFPID-0009"
                }
              }
            ],
            "category": "product_name",
            "name": "RUGGEDCOM ROX RX1536"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003c V2.14.1",
                "product": {
                  "name": "RUGGEDCOM ROX RX5000",
                  "product_id": "CSAFPID-00010"
                }
              }
            ],
            "category": "product_name",
            "name": "RUGGEDCOM ROX RX5000"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2021-37173",
      "cwe": {
        "id": "CWE-269",
        "name": "Improper Privilege Management"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The command line interface of affected devices insufficiently restrict file read and write operations for low privileged users.\n\nThis could allow an authenticated remote attacker to escalate privileges and gain root access to the device.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-00010"
        ]
      },
      "references": [
        {
          "summary": "CVE-2021-37173 - RUGGEDCOM ROX MX5000",
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109800780/"
        },
        {
          "summary": "CVE-2021-37173 - RUGGEDCOM ROX RX1400",
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109800780/"
        },
        {
          "summary": "CVE-2021-37173 - RUGGEDCOM ROX RX1500",
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109800780/"
        },
        {
          "summary": "CVE-2021-37173 - RUGGEDCOM ROX RX1501",
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109800780/"
        },
        {
          "summary": "CVE-2021-37173 - RUGGEDCOM ROX RX1510",
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109800780/"
        },
        {
          "summary": "CVE-2021-37173 - RUGGEDCOM ROX RX1511",
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109800780/"
        },
        {
          "summary": "CVE-2021-37173 - RUGGEDCOM ROX RX1512",
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109800780/"
        },
        {
          "summary": "CVE-2021-37173 - RUGGEDCOM ROX RX1524",
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109800780/"
        },
        {
          "summary": "CVE-2021-37173 - RUGGEDCOM ROX RX1536",
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109800780/"
        },
        {
          "summary": "CVE-2021-37173 - RUGGEDCOM ROX RX5000",
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109800780/"
        },
        {
          "summary": "CVE-2021-37173 Mitre 5.0 json",
          "url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2021-37173.json"
        },
        {
          "category": "external",
          "summary": "web.nvd.nist.gov",
          "url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2021-37173"
        },
        {
          "category": "external",
          "summary": "www.first.org",
          "url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H"
        }
      ],
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.14.1 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-00010"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109800780/"
        },
        {
          "category": "mitigation",
          "details": "Apply the principle of least privileges for accounts configured on the affected devices",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-00010"
          ]
        },
        {
          "category": "mitigation",
          "details": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: https://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\n\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-00010"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-00010"
          ]
        }
      ],
      "title": "CVE-2021-37173"
    },
    {
      "cve": "CVE-2021-37174",
      "cwe": {
        "id": "CWE-250",
        "name": "Execution with Unnecessary Privileges"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The affected devices have a privilege escalation vulnerability, if exploited, an attacker could gain root user access.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-00010"
        ]
      },
      "references": [
        {
          "summary": "CVE-2021-37174 - RUGGEDCOM ROX MX5000",
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109800780/"
        },
        {
          "summary": "CVE-2021-37174 - RUGGEDCOM ROX RX1400",
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109800780/"
        },
        {
          "summary": "CVE-2021-37174 - RUGGEDCOM ROX RX1500",
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109800780/"
        },
        {
          "summary": "CVE-2021-37174 - RUGGEDCOM ROX RX1501",
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109800780/"
        },
        {
          "summary": "CVE-2021-37174 - RUGGEDCOM ROX RX1510",
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109800780/"
        },
        {
          "summary": "CVE-2021-37174 - RUGGEDCOM ROX RX1511",
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109800780/"
        },
        {
          "summary": "CVE-2021-37174 - RUGGEDCOM ROX RX1512",
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109800780/"
        },
        {
          "summary": "CVE-2021-37174 - RUGGEDCOM ROX RX1524",
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109800780/"
        },
        {
          "summary": "CVE-2021-37174 - RUGGEDCOM ROX RX1536",
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109800780/"
        },
        {
          "summary": "CVE-2021-37174 - RUGGEDCOM ROX RX5000",
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109800780/"
        },
        {
          "summary": "CVE-2021-37174 Mitre 5.0 json",
          "url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2021-37174.json"
        },
        {
          "category": "external",
          "summary": "web.nvd.nist.gov",
          "url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2021-37174"
        },
        {
          "category": "external",
          "summary": "www.first.org",
          "url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H"
        }
      ],
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.14.1 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-00010"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109800780/"
        },
        {
          "category": "mitigation",
          "details": "Apply the principle of least privileges for accounts configured on the affected devices",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-00010"
          ]
        },
        {
          "category": "mitigation",
          "details": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: https://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\n\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-00010"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-00010"
          ]
        }
      ],
      "title": "CVE-2021-37174"
    },
    {
      "cve": "CVE-2021-37175",
      "cwe": {
        "id": "CWE-280",
        "name": "Improper Handling of Insufficient Permissions or Privileges "
      },
      "notes": [
        {
          "category": "summary",
          "text": "The affected devices do not properly handle permissions to traverse the file system. If exploited, an attacker could gain access to an overview of the complete file system on the affected devices.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-00010"
        ]
      },
      "references": [
        {
          "summary": "CVE-2021-37175 - RUGGEDCOM ROX MX5000",
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109800780/"
        },
        {
          "summary": "CVE-2021-37175 - RUGGEDCOM ROX RX1400",
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109800780/"
        },
        {
          "summary": "CVE-2021-37175 - RUGGEDCOM ROX RX1500",
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109800780/"
        },
        {
          "summary": "CVE-2021-37175 - RUGGEDCOM ROX RX1501",
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109800780/"
        },
        {
          "summary": "CVE-2021-37175 - RUGGEDCOM ROX RX1510",
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109800780/"
        },
        {
          "summary": "CVE-2021-37175 - RUGGEDCOM ROX RX1511",
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109800780/"
        },
        {
          "summary": "CVE-2021-37175 - RUGGEDCOM ROX RX1512",
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109800780/"
        },
        {
          "summary": "CVE-2021-37175 - RUGGEDCOM ROX RX1524",
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109800780/"
        },
        {
          "summary": "CVE-2021-37175 - RUGGEDCOM ROX RX1536",
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109800780/"
        },
        {
          "summary": "CVE-2021-37175 - RUGGEDCOM ROX RX5000",
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109800780/"
        },
        {
          "summary": "CVE-2021-37175 Mitre 5.0 json",
          "url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2021-37175.json"
        },
        {
          "category": "external",
          "summary": "web.nvd.nist.gov",
          "url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2021-37175"
        },
        {
          "category": "external",
          "summary": "www.first.org",
          "url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N"
        }
      ],
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.14.1 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-00010"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109800780/"
        },
        {
          "category": "mitigation",
          "details": "Apply the principle of least privileges for accounts configured on the affected devices",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-00010"
          ]
        },
        {
          "category": "mitigation",
          "details": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: https://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\n\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-00010"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-00010"
          ]
        }
      ],
      "title": "CVE-2021-37175"
    }
  ]
}


Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading...

Loading...

Loading...

Sightings

Author Source Type Date

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
  • Confirmed: The vulnerability is confirmed from an analyst perspective.
  • Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
  • Patched: This vulnerability was successfully patched by the user reporting the sighting.
  • Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
  • Not confirmed: The user expresses doubt about the veracity of the vulnerability.
  • Not patched: This vulnerability was not successfully patched by the user reporting the sighting.