icsa-22-286-14
Vulnerability from csaf_cisa
Published
2022-10-13 00:00
Modified
2022-10-13 00:00
Summary
Siemens SIMATIC HMI Panels

Notes

CISA Disclaimer
This CSAF advisory was extracted from unstructured data and may contain inaccuracies. If you notice any errors, please reach out to the designated contact at CISA CSAF: central@cisa.dhs.gov
Legal Notice
All information products included in https://us-cert.cisa.gov/ics are provided "as is" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.
Risk evaluation
Successful exploitation of this vulnerability could allow an attacker to cause a permanent denial-of-service condition by sending specially crafted TCP packets. This condition would then require a device reboot.
Critical infrastructure sectors
Multiple
Countries/areas deployed
Worldwide
Company headquarters location
Germany
Recommended Practices
CISA recommends users take defensive measures to minimize the risk of exploitation of this vulnerability these vulnerabilities. Specifically, users should:
Recommended Practices
CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
Recommended Practices
CISA also provides a section for control systems security recommended practices on the ICS webpage at cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
Recommended Practices
Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
Recommended Practices
Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
Additional Resources
For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories
Exploitability
No known public exploits specifically target this vulnerability.



{
  "document": {
    "acknowledgments": [
      {
        "organization": "Siemens",
        "summary": "reporting this vulnerability to CISA"
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited",
      "tlp": {
        "label": "WHITE",
        "url": "https://us-cert.cisa.gov/tlp/"
      }
    },
    "lang": "en-US",
    "notes": [
      {
        "category": "general",
        "text": "This CSAF advisory was extracted from unstructured data and may contain inaccuracies. If you notice any errors, please reach out to the designated contact at CISA CSAF: central@cisa.dhs.gov",
        "title": "CISA Disclaimer"
      },
      {
        "category": "legal_disclaimer",
        "text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
        "title": "Legal Notice"
      },
      {
        "category": "summary",
        "text": "Successful exploitation of this vulnerability could allow an attacker to cause a permanent denial-of-service condition by sending specially crafted TCP packets. This condition would then require a device reboot.",
        "title": "Risk evaluation"
      },
      {
        "category": "other",
        "text": "Multiple",
        "title": "Critical infrastructure sectors"
      },
      {
        "category": "other",
        "text": "Worldwide",
        "title": "Countries/areas deployed"
      },
      {
        "category": "other",
        "text": "Germany",
        "title": "Company headquarters location"
      },
      {
        "category": "general",
        "text": "CISA recommends users take defensive measures to minimize the risk of exploitation of this vulnerability these vulnerabilities. Specifically, users should:",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA also provides a section for control systems security recommended practices on the ICS webpage at cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "other",
        "text": "No known public exploits specifically target this vulnerability.",
        "title": "Exploitability"
      }
    ],
    "publisher": {
      "category": "coordinator",
      "contact_details": "Email: CISAservicedesk@cisa.dhs.gov;\n Toll Free: 1-888-282-0870",
      "name": "CISA",
      "namespace": "https://www.cisa.gov/"
    },
    "references": [
      {
        "category": "external",
        "summary": "SSA-384224: Denial of Service Vulnerability in SIMATIC HMI Panels - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-384224.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-22-286-14 JSON",
        "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2022/icsa-22-286-14.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-22-286-14 Web Version",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-22-286-14"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/alerts/ICS-ALERT-10-301-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-22-286-14"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
      },
      {
        "category": "external",
        "summary": "SSA-384224: Denial of Service Vulnerability in SIMATIC HMI Panels - PDF Version",
        "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-384224.pdf"
      },
      {
        "category": "external",
        "summary": "SSA-384224: Denial of Service Vulnerability in SIMATIC HMI Panels - TXT Version",
        "url": "https://cert-portal.siemens.com/productcert/txt/ssa-384224.txt"
      }
    ],
    "title": "Siemens SIMATIC HMI Panels",
    "tracking": {
      "current_release_date": "2022-10-13T00:00:00.000000Z",
      "generator": {
        "engine": {
          "name": "CISA CSAF Generator",
          "version": "1.0.0"
        }
      },
      "id": "ICSA-22-286-14",
      "initial_release_date": "2022-10-13T00:00:00.000000Z",
      "revision_history": [
        {
          "date": "2022-10-13T00:00:00.000000Z",
          "legacy_version": "Initial",
          "number": "1",
          "summary": "Publication Date"
        }
      ],
      "status": "final",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003c V17 Update 4",
                "product": {
                  "name": "SIMATIC HMI Comfort Panels (incl. SIPLUS variants)",
                  "product_id": "CSAFPID-0001"
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC HMI Comfort Panels (incl. SIPLUS variants)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003c V17 Update 4",
                "product": {
                  "name": "SIMATIC HMI KTP Mobile Panels",
                  "product_id": "CSAFPID-0002"
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC HMI KTP Mobile Panels"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003c V17 Update 5",
                "product": {
                  "name": "SIMATIC HMI KTP1200 Basic (6AV2123-2MB03-0AX0)",
                  "product_id": "CSAFPID-0003",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6AV2123-2MB03-0AX0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC HMI KTP1200 Basic (6AV2123-2MB03-0AX0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003c V17 Update 5",
                "product": {
                  "name": "SIMATIC HMI KTP400 Basic (6AV2123-2DB03-0AX0)",
                  "product_id": "CSAFPID-0004",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6AV2123-2DB03-0AX0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC HMI KTP400 Basic (6AV2123-2DB03-0AX0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003c V17 Update 5",
                "product": {
                  "name": "SIMATIC HMI KTP700 Basic (6AV2123-2GB03-0AX0)",
                  "product_id": "CSAFPID-0005",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6AV2123-2GB03-0AX0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC HMI KTP700 Basic (6AV2123-2GB03-0AX0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003c V17 Update 5",
                "product": {
                  "name": "SIMATIC HMI KTP900 Basic (6AV2123-2JB03-0AX0)",
                  "product_id": "CSAFPID-0006",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6AV2123-2JB03-0AX0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC HMI KTP900 Basic (6AV2123-2JB03-0AX0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003c V17 Update 5",
                "product": {
                  "name": "SIPLUS HMI KTP1200 BASIC (6AG1123-2MB03-2AX0)",
                  "product_id": "CSAFPID-0007",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6AG1123-2MB03-2AX0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIPLUS HMI KTP1200 BASIC (6AG1123-2MB03-2AX0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003c V17 Update 5",
                "product": {
                  "name": "SIPLUS HMI KTP400 BASIC (6AG1123-2DB03-2AX0)",
                  "product_id": "CSAFPID-0008",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6AG1123-2DB03-2AX0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIPLUS HMI KTP400 BASIC (6AG1123-2DB03-2AX0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003c V17 Update 5",
                "product": {
                  "name": "SIPLUS HMI KTP700 BASIC (6AG1123-2GB03-2AX0)",
                  "product_id": "CSAFPID-0009",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6AG1123-2GB03-2AX0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIPLUS HMI KTP700 BASIC (6AG1123-2GB03-2AX0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003c V17 Update 5",
                "product": {
                  "name": "SIPLUS HMI KTP900 BASIC (6AG1123-2JB03-2AX0)",
                  "product_id": "CSAFPID-00010",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6AG1123-2JB03-2AX0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIPLUS HMI KTP900 BASIC (6AG1123-2JB03-2AX0)"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2022-40227",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Affected devices do not properly validate input sent to certain services over TCP. This could allow an unauthenticated remote attacker to cause a permanent denial of service condition (requiring a device reboot) by sending specially crafted TCP packets.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-00010"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "web.nvd.nist.gov",
          "url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2022-40227"
        },
        {
          "category": "external",
          "summary": "www.first.org",
          "url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H"
        }
      ],
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V17 Update 4 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109746530/"
        },
        {
          "category": "vendor_fix",
          "details": "Update to V17 Update 5 or later version",
          "product_ids": [
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-00010"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109746530/"
        },
        {
          "category": "workaround",
          "details": "Restrict access to port 5001/tcp and 5002/tcp to trusted IP addresses only",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-00010"
          ]
        },
        {
          "category": "mitigation",
          "details": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: \nhttps://www.siemens.com/industrialsecurity",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-00010"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-00010"
          ]
        }
      ],
      "title": "CVE-2022-40227"
    }
  ]
}


Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading...

Loading...

Loading...

Sightings

Author Source Type Date

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
  • Confirmed: The vulnerability is confirmed from an analyst perspective.
  • Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
  • Patched: This vulnerability was successfully patched by the user reporting the sighting.
  • Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
  • Not confirmed: The user expresses doubt about the veracity of the vulnerability.
  • Not patched: This vulnerability was not successfully patched by the user reporting the sighting.