rhsa-2002_163
Vulnerability from csaf_redhat
Published
2002-08-08 09:20
Modified
2024-11-21 22:26
Summary
Red Hat Security Advisory: openssl, mm security update for Stronghold

Notes

Topic
Updated Apache packages are available which fix several serious buffer overflow vulnerabilities in OpenSSL and a local privilege escalation vulnerability in MM.
Details
Note: Please read the "Solution" section below as there are special upgrade instructions for this errata. ----------- OpenSSL is a commercial-grade, full-featured, and Open Source toolkit which implements the Secure Sockets Layer (SSL v2/v3) and Transport Layer Security (TLS v1) protocols as well as a full-strength general purpose cryptography library. A security audit of the OpenSSL code sponsored by DARPA found several buffer overflows in OpenSSL which affect versions 0.9.7 and 0.9.6d and earlier: 1. The master key supplied by a client to an SSL version 2 server could be oversized, causing a stack-based buffer overflow. This issue is remotely exploitable. Services that have SSLv2 disabled would not be vulnerable to this issue. (CAN-2002-0656) 2. The SSLv3 session ID supplied to a client from a malicious server could be oversized and overrun a buffer. This issue looks to be remotely exploitable. (CAN-2002-0656) 3. Various buffers used for storing ASCII representations of integers were too small on 64 bit platforms. This issue may be exploitable. (CAN-2002-0655) A further issue was found in OpenSSL 0.9.7 that does not affect versions of OpenSSL included in Stronghold (CAN-2002-0657). The MM library provides an abstraction layer which allows related processes to easily share data. On systems where shared memory or other inter-process communication mechanisms are not available, the MM library will emulate them using temporary files. MM is used in Stronghold to providing shared memory pools to Apache modules. Versions of MM up to and including 1.1.3 open temporary files in an unsafe manner, allowing a malicious local user to cause an application which uses MM to overwrite any file to which it has write access. (CAN-2002-0658) All users are advised to upgrade to these errata packages which contain a patched version of MM that is not vulnerable to this issue. Thanks go to the OpenSSL team, Ben Laurie, and Marcus Meissner for providing patches for these issues.
Terms of Use
This content is licensed under the Creative Commons Attribution 4.0 International License (https://creativecommons.org/licenses/by/4.0/). If you distribute this content, or a modified version of it, you must provide attribution to Red Hat Inc. and provide a link to the original.


To clipboard 

{
  "document": {
    "aggregate_severity": {
      "namespace": "https://access.redhat.com/security/updates/classification/",
      "text": "Critical"
    },
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Copyright \u00a9 Red Hat, Inc. All rights reserved.",
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Updated Apache packages are available which fix several serious buffer\noverflow vulnerabilities in OpenSSL and a local privilege escalation\nvulnerability in MM.",
        "title": "Topic"
      },
      {
        "category": "general",
        "text": "Note:\n\nPlease read the \"Solution\" section below as there are special upgrade\ninstructions for this errata.\n\n-----------\n\nOpenSSL is a commercial-grade, full-featured, and Open Source toolkit which\nimplements the Secure Sockets Layer (SSL v2/v3) and Transport Layer\nSecurity (TLS v1) protocols as well as a full-strength general purpose\ncryptography library. A security audit of the OpenSSL code sponsored by\nDARPA found several buffer overflows in OpenSSL which affect versions 0.9.7\nand 0.9.6d and earlier:\n\n1. The master key supplied by a client to an SSL version 2 server could be\noversized, causing a stack-based buffer overflow. This issue is remotely\nexploitable. Services that have SSLv2 disabled would not be vulnerable to\nthis issue. (CAN-2002-0656)\n\n2. The SSLv3 session ID supplied to a client from a malicious server could\nbe oversized and overrun a buffer. This issue looks to be remotely\nexploitable. (CAN-2002-0656)\n\n3. Various buffers used for storing ASCII representations of integers were\ntoo small on 64 bit platforms. This issue may be exploitable. (CAN-2002-0655)\n\nA further issue was found in OpenSSL 0.9.7 that does not affect versions of\nOpenSSL included in Stronghold (CAN-2002-0657).\n\nThe MM library provides an abstraction layer which allows related processes\nto easily share data. On systems where shared memory or other\ninter-process communication mechanisms are not available, the MM library\nwill emulate them using temporary files. MM is used in Stronghold to\nproviding shared memory pools to Apache modules.\n\nVersions of MM up to and including 1.1.3 open temporary files in an unsafe\nmanner, allowing a malicious local user to cause an application which uses\nMM to overwrite any file to which it has write access. (CAN-2002-0658)\n\nAll users are advised to upgrade to these errata packages which contain a\npatched version of MM that is not vulnerable to this issue.\n\nThanks go to the OpenSSL team, Ben Laurie, and Marcus Meissner for\nproviding patches for these issues.",
        "title": "Details"
      },
      {
        "category": "legal_disclaimer",
        "text": "This content is licensed under the Creative Commons Attribution 4.0 International License (https://creativecommons.org/licenses/by/4.0/). If you distribute this content, or a modified version of it, you must provide attribution to Red Hat Inc. and provide a link to the original.",
        "title": "Terms of Use"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "https://access.redhat.com/security/team/contact/",
      "issuing_authority": "Red Hat Product Security is responsible for vulnerability handling across all Red Hat products and services.",
      "name": "Red Hat Product Security",
      "namespace": "https://www.redhat.com"
    },
    "references": [
      {
        "category": "self",
        "summary": "https://access.redhat.com/errata/RHSA-2002:163",
        "url": "https://access.redhat.com/errata/RHSA-2002:163"
      },
      {
        "category": "external",
        "summary": "https://access.redhat.com/security/updates/classification/#critical",
        "url": "https://access.redhat.com/security/updates/classification/#critical"
      },
      {
        "category": "self",
        "summary": "Canonical URL",
        "url": "https://security.access.redhat.com/data/csaf/v2/advisories/2002/rhsa-2002_163.json"
      }
    ],
    "title": "Red Hat Security Advisory: openssl, mm security update for Stronghold",
    "tracking": {
      "current_release_date": "2024-11-21T22:26:42+00:00",
      "generator": {
        "date": "2024-11-21T22:26:42+00:00",
        "engine": {
          "name": "Red Hat SDEngine",
          "version": "4.2.1"
        }
      },
      "id": "RHSA-2002:163",
      "initial_release_date": "2002-08-08T09:20:00+00:00",
      "revision_history": [
        {
          "date": "2002-08-08T09:20:00+00:00",
          "number": "1",
          "summary": "Initial version"
        },
        {
          "date": "2002-07-31T00:00:00+00:00",
          "number": "2",
          "summary": "Last updated version"
        },
        {
          "date": "2024-11-21T22:26:42+00:00",
          "number": "3",
          "summary": "Last generated version"
        }
      ],
      "status": "final",
      "version": "3"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_name",
                "name": "Red Hat Stronghold 4",
                "product": {
                  "name": "Red Hat Stronghold 4",
                  "product_id": "Red Hat Stronghold 4",
                  "product_identification_helper": {
                    "cpe": "cpe:/a:redhat:stronghold:4"
                  }
                }
              }
            ],
            "category": "product_family",
            "name": "Stronghold Cross Platform"
          }
        ],
        "category": "vendor",
        "name": "Red Hat"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2002-0655",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1616787"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "OpenSSL 0.9.6d and earlier, and 0.9.7-beta2 and earlier, does not properly handle ASCII representations of integers on 64 bit platforms, which could allow attackers to cause a denial of service and possibly execute arbitrary code.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "security flaw",
          "title": "Vulnerability summary"
        }
      ],
      "product_status": {
        "fixed": [
          "Red Hat Stronghold 4"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2002-0655"
        },
        {
          "category": "external",
          "summary": "RHBZ#1616787",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1616787"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2002-0655",
          "url": "https://www.cve.org/CVERecord?id=CVE-2002-0655"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2002-0655",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2002-0655"
        }
      ],
      "release_date": "2002-07-30T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2002-08-08T09:20:00+00:00",
          "details": "We have backported the security fixes for the versions of OpenSSL \nand mm included in Stronghold 4. The fixed packages are now available via\nthe update agent service; run\n\n$ bin/agent\n\nfrom the Stronghold 4 install root to upgrade an existing Stronghold 4\ninstallation to the new package versions.\n\nDue to a bug in the update agent, users of Solaris on Intel platforms\nshould create a file \"conf/update-agent.conf\" in the install root,\ncontaining the following two lines:\n\n[agent]\nignore: RPMPROB_FILTER_IGNOREARCH\n\nAfter the appropriate updates have been applied, it will be necessary to\nmanually restart the server with the following commands:\n\n  $ bin/stop-server\n  $ bin/start-server",
          "product_ids": [
            "Red Hat Stronghold 4"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2002:163"
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Critical"
        }
      ],
      "title": "security flaw"
    },
    {
      "cve": "CVE-2002-0656",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1616788"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "Buffer overflows in OpenSSL 0.9.6d and earlier, and 0.9.7-beta2 and earlier, allow remote attackers to execute arbitrary code via (1) a large client master key in SSL2 or (2) a large session ID in SSL3.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "security flaw",
          "title": "Vulnerability summary"
        }
      ],
      "product_status": {
        "fixed": [
          "Red Hat Stronghold 4"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2002-0656"
        },
        {
          "category": "external",
          "summary": "RHBZ#1616788",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1616788"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2002-0656",
          "url": "https://www.cve.org/CVERecord?id=CVE-2002-0656"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2002-0656",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2002-0656"
        }
      ],
      "release_date": "2002-07-30T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2002-08-08T09:20:00+00:00",
          "details": "We have backported the security fixes for the versions of OpenSSL \nand mm included in Stronghold 4. The fixed packages are now available via\nthe update agent service; run\n\n$ bin/agent\n\nfrom the Stronghold 4 install root to upgrade an existing Stronghold 4\ninstallation to the new package versions.\n\nDue to a bug in the update agent, users of Solaris on Intel platforms\nshould create a file \"conf/update-agent.conf\" in the install root,\ncontaining the following two lines:\n\n[agent]\nignore: RPMPROB_FILTER_IGNOREARCH\n\nAfter the appropriate updates have been applied, it will be necessary to\nmanually restart the server with the following commands:\n\n  $ bin/stop-server\n  $ bin/start-server",
          "product_ids": [
            "Red Hat Stronghold 4"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2002:163"
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Critical"
        }
      ],
      "title": "security flaw"
    },
    {
      "cve": "CVE-2002-0658",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1616790"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "OSSP mm library (libmm) before 1.2.0 allows the local Apache user to gain privileges via temporary files, possibly via a symbolic link attack.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "security flaw",
          "title": "Vulnerability summary"
        }
      ],
      "product_status": {
        "fixed": [
          "Red Hat Stronghold 4"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2002-0658"
        },
        {
          "category": "external",
          "summary": "RHBZ#1616790",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1616790"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2002-0658",
          "url": "https://www.cve.org/CVERecord?id=CVE-2002-0658"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2002-0658",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2002-0658"
        }
      ],
      "release_date": "2002-07-29T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2002-08-08T09:20:00+00:00",
          "details": "We have backported the security fixes for the versions of OpenSSL \nand mm included in Stronghold 4. The fixed packages are now available via\nthe update agent service; run\n\n$ bin/agent\n\nfrom the Stronghold 4 install root to upgrade an existing Stronghold 4\ninstallation to the new package versions.\n\nDue to a bug in the update agent, users of Solaris on Intel platforms\nshould create a file \"conf/update-agent.conf\" in the install root,\ncontaining the following two lines:\n\n[agent]\nignore: RPMPROB_FILTER_IGNOREARCH\n\nAfter the appropriate updates have been applied, it will be necessary to\nmanually restart the server with the following commands:\n\n  $ bin/stop-server\n  $ bin/start-server",
          "product_ids": [
            "Red Hat Stronghold 4"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2002:163"
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "security flaw"
    },
    {
      "cve": "CVE-2002-0659",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1616792"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "The ASN1 library in OpenSSL 0.9.6d and earlier, and 0.9.7-beta2 and earlier, allows remote attackers to cause a denial of service via invalid encodings.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "security flaw",
          "title": "Vulnerability summary"
        }
      ],
      "product_status": {
        "fixed": [
          "Red Hat Stronghold 4"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2002-0659"
        },
        {
          "category": "external",
          "summary": "RHBZ#1616792",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1616792"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2002-0659",
          "url": "https://www.cve.org/CVERecord?id=CVE-2002-0659"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2002-0659",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2002-0659"
        }
      ],
      "release_date": "2002-07-30T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2002-08-08T09:20:00+00:00",
          "details": "We have backported the security fixes for the versions of OpenSSL \nand mm included in Stronghold 4. The fixed packages are now available via\nthe update agent service; run\n\n$ bin/agent\n\nfrom the Stronghold 4 install root to upgrade an existing Stronghold 4\ninstallation to the new package versions.\n\nDue to a bug in the update agent, users of Solaris on Intel platforms\nshould create a file \"conf/update-agent.conf\" in the install root,\ncontaining the following two lines:\n\n[agent]\nignore: RPMPROB_FILTER_IGNOREARCH\n\nAfter the appropriate updates have been applied, it will be necessary to\nmanually restart the server with the following commands:\n\n  $ bin/stop-server\n  $ bin/start-server",
          "product_ids": [
            "Red Hat Stronghold 4"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2002:163"
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Important"
        }
      ],
      "title": "security flaw"
    }
  ]
}


Log in or create an account to share your comment.




Tags
Taxonomy of the tags.




Sightings

Author Source Type Date

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
  • Confirmed: The vulnerability is confirmed from an analyst perspective.
  • Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
  • Patched: This vulnerability was successfully patched by the user reporting the sighting.
  • Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
  • Not confirmed: The user expresses doubt about the veracity of the vulnerability.
  • Not patched: This vulnerability was not successfully patched by the user reporting the sighting.