rhsa-2018_0020
Vulnerability from csaf_redhat
Published
2018-01-04 15:26
Modified
2024-11-14 23:40
Summary
Red Hat Security Advisory: kernel security update
Notes
Topic
An update for kernel is now available for Red Hat Enterprise Linux 6.2 Advanced Update Support.
Red Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.
Details
The kernel packages contain the Linux kernel, the core of any Linux operating system.
Security Fix(es):
An industry-wide issue was found in the way many modern microprocessor designs have implemented speculative execution of instructions (a commonly used performance optimization). There are three primary variants of the issue which differ in the way the speculative execution can be exploited.
Note: This issue is present in hardware and cannot be fully fixed via software update. The updated kernel packages provide software mitigation for this hardware issue at a cost of potential performance penalty. Please refer to References section for further information about this issue and the performance impact.
In this update mitigations for x86-64 architecture are provided.
Variant CVE-2017-5753 triggers the speculative execution by performing a bounds-check bypass. It relies on the presence of a precisely-defined instruction sequence in the privileged code as well as the fact that memory accesses may cause allocation into the microprocessor's data cache even for speculatively executed instructions that never actually commit (retire). As a result, an unprivileged attacker could use this flaw to cross the syscall boundary and read privileged memory by conducting targeted cache side-channel attacks. (CVE-2017-5753, Important)
Variant CVE-2017-5715 triggers the speculative execution by utilizing branch target injection. It relies on the presence of a precisely-defined instruction sequence in the privileged code as well as the fact that memory accesses may cause allocation into the microprocessor's data cache even for speculatively executed instructions that never actually commit (retire). As a result, an unprivileged attacker could use this flaw to cross the syscall and guest/host boundaries and read privileged memory by conducting targeted cache side-channel attacks. (CVE-2017-5715, Important)
Variant CVE-2017-5754 relies on the fact that, on impacted microprocessors, during speculative execution of instruction permission faults, exception generation triggered by a faulting access is suppressed until the retirement of the whole instruction block. In a combination with the fact that memory accesses may populate the cache even when the block is being dropped and never committed (executed), an unprivileged local attacker could use this flaw to read privileged (kernel space) memory by conducting targeted cache side-channel attacks. (CVE-2017-5754, Important)
Note: CVE-2017-5754 affects Intel x86-64 microprocessors. AMD x86-64 microprocessors are not affected by this issue.
Red Hat would like to thank Google Project Zero for reporting these issues.
Terms of Use
This content is licensed under the Creative Commons Attribution 4.0 International License (https://creativecommons.org/licenses/by/4.0/). If you distribute this content, or a modified version of it, you must provide attribution to Red Hat Inc. and provide a link to the original.
{
"document": {
"aggregate_severity": {
"namespace": "https://access.redhat.com/security/updates/classification/",
"text": "Important"
},
"category": "csaf_security_advisory",
"csaf_version": "2.0",
"distribution": {
"text": "Copyright \u00a9 Red Hat, Inc. All rights reserved.",
"tlp": {
"label": "WHITE",
"url": "https://www.first.org/tlp/"
}
},
"lang": "en",
"notes": [
{
"category": "summary",
"text": "An update for kernel is now available for Red Hat Enterprise Linux 6.2 Advanced Update Support.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.",
"title": "Topic"
},
{
"category": "general",
"text": "The kernel packages contain the Linux kernel, the core of any Linux operating system.\n\nSecurity Fix(es):\n\nAn industry-wide issue was found in the way many modern microprocessor designs have implemented speculative execution of instructions (a commonly used performance optimization). There are three primary variants of the issue which differ in the way the speculative execution can be exploited.\n\nNote: This issue is present in hardware and cannot be fully fixed via software update. The updated kernel packages provide software mitigation for this hardware issue at a cost of potential performance penalty. Please refer to References section for further information about this issue and the performance impact.\n\nIn this update mitigations for x86-64 architecture are provided.\n\nVariant CVE-2017-5753 triggers the speculative execution by performing a bounds-check bypass. It relies on the presence of a precisely-defined instruction sequence in the privileged code as well as the fact that memory accesses may cause allocation into the microprocessor\u0027s data cache even for speculatively executed instructions that never actually commit (retire). As a result, an unprivileged attacker could use this flaw to cross the syscall boundary and read privileged memory by conducting targeted cache side-channel attacks. (CVE-2017-5753, Important)\n\nVariant CVE-2017-5715 triggers the speculative execution by utilizing branch target injection. It relies on the presence of a precisely-defined instruction sequence in the privileged code as well as the fact that memory accesses may cause allocation into the microprocessor\u0027s data cache even for speculatively executed instructions that never actually commit (retire). As a result, an unprivileged attacker could use this flaw to cross the syscall and guest/host boundaries and read privileged memory by conducting targeted cache side-channel attacks. (CVE-2017-5715, Important)\n\nVariant CVE-2017-5754 relies on the fact that, on impacted microprocessors, during speculative execution of instruction permission faults, exception generation triggered by a faulting access is suppressed until the retirement of the whole instruction block. In a combination with the fact that memory accesses may populate the cache even when the block is being dropped and never committed (executed), an unprivileged local attacker could use this flaw to read privileged (kernel space) memory by conducting targeted cache side-channel attacks. (CVE-2017-5754, Important)\n\nNote: CVE-2017-5754 affects Intel x86-64 microprocessors. AMD x86-64 microprocessors are not affected by this issue.\n\nRed Hat would like to thank Google Project Zero for reporting these issues.",
"title": "Details"
},
{
"category": "legal_disclaimer",
"text": "This content is licensed under the Creative Commons Attribution 4.0 International License (https://creativecommons.org/licenses/by/4.0/). If you distribute this content, or a modified version of it, you must provide attribution to Red Hat Inc. and provide a link to the original.",
"title": "Terms of Use"
}
],
"publisher": {
"category": "vendor",
"contact_details": "https://access.redhat.com/security/team/contact/",
"issuing_authority": "Red Hat Product Security is responsible for vulnerability handling across all Red Hat products and services.",
"name": "Red Hat Product Security",
"namespace": "https://www.redhat.com"
},
"references": [
{
"category": "self",
"summary": "https://access.redhat.com/errata/RHSA-2018:0020",
"url": "https://access.redhat.com/errata/RHSA-2018:0020"
},
{
"category": "external",
"summary": "https://access.redhat.com/security/updates/classification/#important",
"url": "https://access.redhat.com/security/updates/classification/#important"
},
{
"category": "external",
"summary": "https://access.redhat.com/security/vulnerabilities/speculativeexecution",
"url": "https://access.redhat.com/security/vulnerabilities/speculativeexecution"
},
{
"category": "external",
"summary": "https://access.redhat.com/security/cve/CVE-2017-5753",
"url": "https://access.redhat.com/security/cve/CVE-2017-5753"
},
{
"category": "external",
"summary": "https://access.redhat.com/security/cve/CVE-2017-5715",
"url": "https://access.redhat.com/security/cve/CVE-2017-5715"
},
{
"category": "external",
"summary": "https://access.redhat.com/security/cve/CVE-2017-5754",
"url": "https://access.redhat.com/security/cve/CVE-2017-5754"
},
{
"category": "external",
"summary": "1519778",
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=1519778"
},
{
"category": "external",
"summary": "1519780",
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=1519780"
},
{
"category": "external",
"summary": "1519781",
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=1519781"
},
{
"category": "self",
"summary": "Canonical URL",
"url": "https://security.access.redhat.com/data/csaf/v2/advisories/2018/rhsa-2018_0020.json"
}
],
"title": "Red Hat Security Advisory: kernel security update",
"tracking": {
"current_release_date": "2024-11-14T23:40:13+00:00",
"generator": {
"date": "2024-11-14T23:40:13+00:00",
"engine": {
"name": "Red Hat SDEngine",
"version": "4.2.1"
}
},
"id": "RHSA-2018:0020",
"initial_release_date": "2018-01-04T15:26:01+00:00",
"revision_history": [
{
"date": "2018-01-04T15:26:01+00:00",
"number": "1",
"summary": "Initial version"
},
{
"date": "2018-01-04T15:26:01+00:00",
"number": "2",
"summary": "Last updated version"
},
{
"date": "2024-11-14T23:40:13+00:00",
"number": "3",
"summary": "Last generated version"
}
],
"status": "final",
"version": "3"
}
},
"product_tree": {
"branches": [
{
"branches": [
{
"branches": [
{
"category": "product_name",
"name": "Red Hat Enterprise Linux Server AUS (v. 6.2)",
"product": {
"name": "Red Hat Enterprise Linux Server AUS (v. 6.2)",
"product_id": "6Server-6.2.AUS",
"product_identification_helper": {
"cpe": "cpe:/o:redhat:rhel_mission_critical:6.2::server"
}
}
},
{
"category": "product_name",
"name": "Red Hat Enterprise Linux Server Optional AUS (v. 6.2)",
"product": {
"name": "Red Hat Enterprise Linux Server Optional AUS (v. 6.2)",
"product_id": "6Server-optional-6.2.AUS",
"product_identification_helper": {
"cpe": "cpe:/o:redhat:rhel_mission_critical:6.2::server"
}
}
}
],
"category": "product_family",
"name": "Red Hat Enterprise Linux"
},
{
"branches": [
{
"category": "product_version",
"name": "python-perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"product": {
"name": "python-perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"product_id": "python-perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"product_identification_helper": {
"purl": "pkg:rpm/redhat/python-perf-debuginfo@2.6.32-220.76.2.el6?arch=x86_64"
}
}
},
{
"category": "product_version",
"name": "kernel-debuginfo-common-x86_64-0:2.6.32-220.76.2.el6.x86_64",
"product": {
"name": "kernel-debuginfo-common-x86_64-0:2.6.32-220.76.2.el6.x86_64",
"product_id": "kernel-debuginfo-common-x86_64-0:2.6.32-220.76.2.el6.x86_64",
"product_identification_helper": {
"purl": "pkg:rpm/redhat/kernel-debuginfo-common-x86_64@2.6.32-220.76.2.el6?arch=x86_64"
}
}
},
{
"category": "product_version",
"name": "python-perf-0:2.6.32-220.76.2.el6.x86_64",
"product": {
"name": "python-perf-0:2.6.32-220.76.2.el6.x86_64",
"product_id": "python-perf-0:2.6.32-220.76.2.el6.x86_64",
"product_identification_helper": {
"purl": "pkg:rpm/redhat/python-perf@2.6.32-220.76.2.el6?arch=x86_64"
}
}
},
{
"category": "product_version",
"name": "perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"product": {
"name": "perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"product_id": "perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"product_identification_helper": {
"purl": "pkg:rpm/redhat/perf-debuginfo@2.6.32-220.76.2.el6?arch=x86_64"
}
}
},
{
"category": "product_version",
"name": "kernel-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"product": {
"name": "kernel-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"product_id": "kernel-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"product_identification_helper": {
"purl": "pkg:rpm/redhat/kernel-debuginfo@2.6.32-220.76.2.el6?arch=x86_64"
}
}
},
{
"category": "product_version",
"name": "kernel-debug-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"product": {
"name": "kernel-debug-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"product_id": "kernel-debug-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"product_identification_helper": {
"purl": "pkg:rpm/redhat/kernel-debug-debuginfo@2.6.32-220.76.2.el6?arch=x86_64"
}
}
},
{
"category": "product_version",
"name": "kernel-debug-devel-0:2.6.32-220.76.2.el6.x86_64",
"product": {
"name": "kernel-debug-devel-0:2.6.32-220.76.2.el6.x86_64",
"product_id": "kernel-debug-devel-0:2.6.32-220.76.2.el6.x86_64",
"product_identification_helper": {
"purl": "pkg:rpm/redhat/kernel-debug-devel@2.6.32-220.76.2.el6?arch=x86_64"
}
}
},
{
"category": "product_version",
"name": "perf-0:2.6.32-220.76.2.el6.x86_64",
"product": {
"name": "perf-0:2.6.32-220.76.2.el6.x86_64",
"product_id": "perf-0:2.6.32-220.76.2.el6.x86_64",
"product_identification_helper": {
"purl": "pkg:rpm/redhat/perf@2.6.32-220.76.2.el6?arch=x86_64"
}
}
},
{
"category": "product_version",
"name": "kernel-devel-0:2.6.32-220.76.2.el6.x86_64",
"product": {
"name": "kernel-devel-0:2.6.32-220.76.2.el6.x86_64",
"product_id": "kernel-devel-0:2.6.32-220.76.2.el6.x86_64",
"product_identification_helper": {
"purl": "pkg:rpm/redhat/kernel-devel@2.6.32-220.76.2.el6?arch=x86_64"
}
}
},
{
"category": "product_version",
"name": "kernel-debug-0:2.6.32-220.76.2.el6.x86_64",
"product": {
"name": "kernel-debug-0:2.6.32-220.76.2.el6.x86_64",
"product_id": "kernel-debug-0:2.6.32-220.76.2.el6.x86_64",
"product_identification_helper": {
"purl": "pkg:rpm/redhat/kernel-debug@2.6.32-220.76.2.el6?arch=x86_64"
}
}
},
{
"category": "product_version",
"name": "kernel-0:2.6.32-220.76.2.el6.x86_64",
"product": {
"name": "kernel-0:2.6.32-220.76.2.el6.x86_64",
"product_id": "kernel-0:2.6.32-220.76.2.el6.x86_64",
"product_identification_helper": {
"purl": "pkg:rpm/redhat/kernel@2.6.32-220.76.2.el6?arch=x86_64"
}
}
},
{
"category": "product_version",
"name": "kernel-headers-0:2.6.32-220.76.2.el6.x86_64",
"product": {
"name": "kernel-headers-0:2.6.32-220.76.2.el6.x86_64",
"product_id": "kernel-headers-0:2.6.32-220.76.2.el6.x86_64",
"product_identification_helper": {
"purl": "pkg:rpm/redhat/kernel-headers@2.6.32-220.76.2.el6?arch=x86_64"
}
}
}
],
"category": "architecture",
"name": "x86_64"
},
{
"branches": [
{
"category": "product_version",
"name": "kernel-0:2.6.32-220.76.2.el6.src",
"product": {
"name": "kernel-0:2.6.32-220.76.2.el6.src",
"product_id": "kernel-0:2.6.32-220.76.2.el6.src",
"product_identification_helper": {
"purl": "pkg:rpm/redhat/kernel@2.6.32-220.76.2.el6?arch=src"
}
}
}
],
"category": "architecture",
"name": "src"
},
{
"branches": [
{
"category": "product_version",
"name": "kernel-firmware-0:2.6.32-220.76.2.el6.noarch",
"product": {
"name": "kernel-firmware-0:2.6.32-220.76.2.el6.noarch",
"product_id": "kernel-firmware-0:2.6.32-220.76.2.el6.noarch",
"product_identification_helper": {
"purl": "pkg:rpm/redhat/kernel-firmware@2.6.32-220.76.2.el6?arch=noarch"
}
}
},
{
"category": "product_version",
"name": "kernel-doc-0:2.6.32-220.76.2.el6.noarch",
"product": {
"name": "kernel-doc-0:2.6.32-220.76.2.el6.noarch",
"product_id": "kernel-doc-0:2.6.32-220.76.2.el6.noarch",
"product_identification_helper": {
"purl": "pkg:rpm/redhat/kernel-doc@2.6.32-220.76.2.el6?arch=noarch"
}
}
}
],
"category": "architecture",
"name": "noarch"
}
],
"category": "vendor",
"name": "Red Hat"
}
],
"relationships": [
{
"category": "default_component_of",
"full_product_name": {
"name": "kernel-0:2.6.32-220.76.2.el6.src as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)",
"product_id": "6Server-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.src"
},
"product_reference": "kernel-0:2.6.32-220.76.2.el6.src",
"relates_to_product_reference": "6Server-6.2.AUS"
},
{
"category": "default_component_of",
"full_product_name": {
"name": "kernel-0:2.6.32-220.76.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)",
"product_id": "6Server-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.x86_64"
},
"product_reference": "kernel-0:2.6.32-220.76.2.el6.x86_64",
"relates_to_product_reference": "6Server-6.2.AUS"
},
{
"category": "default_component_of",
"full_product_name": {
"name": "kernel-debug-0:2.6.32-220.76.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)",
"product_id": "6Server-6.2.AUS:kernel-debug-0:2.6.32-220.76.2.el6.x86_64"
},
"product_reference": "kernel-debug-0:2.6.32-220.76.2.el6.x86_64",
"relates_to_product_reference": "6Server-6.2.AUS"
},
{
"category": "default_component_of",
"full_product_name": {
"name": "kernel-debug-debuginfo-0:2.6.32-220.76.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)",
"product_id": "6Server-6.2.AUS:kernel-debug-debuginfo-0:2.6.32-220.76.2.el6.x86_64"
},
"product_reference": "kernel-debug-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"relates_to_product_reference": "6Server-6.2.AUS"
},
{
"category": "default_component_of",
"full_product_name": {
"name": "kernel-debug-devel-0:2.6.32-220.76.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)",
"product_id": "6Server-6.2.AUS:kernel-debug-devel-0:2.6.32-220.76.2.el6.x86_64"
},
"product_reference": "kernel-debug-devel-0:2.6.32-220.76.2.el6.x86_64",
"relates_to_product_reference": "6Server-6.2.AUS"
},
{
"category": "default_component_of",
"full_product_name": {
"name": "kernel-debuginfo-0:2.6.32-220.76.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)",
"product_id": "6Server-6.2.AUS:kernel-debuginfo-0:2.6.32-220.76.2.el6.x86_64"
},
"product_reference": "kernel-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"relates_to_product_reference": "6Server-6.2.AUS"
},
{
"category": "default_component_of",
"full_product_name": {
"name": "kernel-debuginfo-common-x86_64-0:2.6.32-220.76.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)",
"product_id": "6Server-6.2.AUS:kernel-debuginfo-common-x86_64-0:2.6.32-220.76.2.el6.x86_64"
},
"product_reference": "kernel-debuginfo-common-x86_64-0:2.6.32-220.76.2.el6.x86_64",
"relates_to_product_reference": "6Server-6.2.AUS"
},
{
"category": "default_component_of",
"full_product_name": {
"name": "kernel-devel-0:2.6.32-220.76.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)",
"product_id": "6Server-6.2.AUS:kernel-devel-0:2.6.32-220.76.2.el6.x86_64"
},
"product_reference": "kernel-devel-0:2.6.32-220.76.2.el6.x86_64",
"relates_to_product_reference": "6Server-6.2.AUS"
},
{
"category": "default_component_of",
"full_product_name": {
"name": "kernel-doc-0:2.6.32-220.76.2.el6.noarch as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)",
"product_id": "6Server-6.2.AUS:kernel-doc-0:2.6.32-220.76.2.el6.noarch"
},
"product_reference": "kernel-doc-0:2.6.32-220.76.2.el6.noarch",
"relates_to_product_reference": "6Server-6.2.AUS"
},
{
"category": "default_component_of",
"full_product_name": {
"name": "kernel-firmware-0:2.6.32-220.76.2.el6.noarch as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)",
"product_id": "6Server-6.2.AUS:kernel-firmware-0:2.6.32-220.76.2.el6.noarch"
},
"product_reference": "kernel-firmware-0:2.6.32-220.76.2.el6.noarch",
"relates_to_product_reference": "6Server-6.2.AUS"
},
{
"category": "default_component_of",
"full_product_name": {
"name": "kernel-headers-0:2.6.32-220.76.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)",
"product_id": "6Server-6.2.AUS:kernel-headers-0:2.6.32-220.76.2.el6.x86_64"
},
"product_reference": "kernel-headers-0:2.6.32-220.76.2.el6.x86_64",
"relates_to_product_reference": "6Server-6.2.AUS"
},
{
"category": "default_component_of",
"full_product_name": {
"name": "perf-0:2.6.32-220.76.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)",
"product_id": "6Server-6.2.AUS:perf-0:2.6.32-220.76.2.el6.x86_64"
},
"product_reference": "perf-0:2.6.32-220.76.2.el6.x86_64",
"relates_to_product_reference": "6Server-6.2.AUS"
},
{
"category": "default_component_of",
"full_product_name": {
"name": "perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)",
"product_id": "6Server-6.2.AUS:perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64"
},
"product_reference": "perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"relates_to_product_reference": "6Server-6.2.AUS"
},
{
"category": "default_component_of",
"full_product_name": {
"name": "python-perf-0:2.6.32-220.76.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)",
"product_id": "6Server-6.2.AUS:python-perf-0:2.6.32-220.76.2.el6.x86_64"
},
"product_reference": "python-perf-0:2.6.32-220.76.2.el6.x86_64",
"relates_to_product_reference": "6Server-6.2.AUS"
},
{
"category": "default_component_of",
"full_product_name": {
"name": "python-perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server AUS (v. 6.2)",
"product_id": "6Server-6.2.AUS:python-perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64"
},
"product_reference": "python-perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"relates_to_product_reference": "6Server-6.2.AUS"
},
{
"category": "default_component_of",
"full_product_name": {
"name": "kernel-0:2.6.32-220.76.2.el6.src as a component of Red Hat Enterprise Linux Server Optional AUS (v. 6.2)",
"product_id": "6Server-optional-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.src"
},
"product_reference": "kernel-0:2.6.32-220.76.2.el6.src",
"relates_to_product_reference": "6Server-optional-6.2.AUS"
},
{
"category": "default_component_of",
"full_product_name": {
"name": "kernel-0:2.6.32-220.76.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional AUS (v. 6.2)",
"product_id": "6Server-optional-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.x86_64"
},
"product_reference": "kernel-0:2.6.32-220.76.2.el6.x86_64",
"relates_to_product_reference": "6Server-optional-6.2.AUS"
},
{
"category": "default_component_of",
"full_product_name": {
"name": "kernel-debug-0:2.6.32-220.76.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional AUS (v. 6.2)",
"product_id": "6Server-optional-6.2.AUS:kernel-debug-0:2.6.32-220.76.2.el6.x86_64"
},
"product_reference": "kernel-debug-0:2.6.32-220.76.2.el6.x86_64",
"relates_to_product_reference": "6Server-optional-6.2.AUS"
},
{
"category": "default_component_of",
"full_product_name": {
"name": "kernel-debug-debuginfo-0:2.6.32-220.76.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional AUS (v. 6.2)",
"product_id": "6Server-optional-6.2.AUS:kernel-debug-debuginfo-0:2.6.32-220.76.2.el6.x86_64"
},
"product_reference": "kernel-debug-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"relates_to_product_reference": "6Server-optional-6.2.AUS"
},
{
"category": "default_component_of",
"full_product_name": {
"name": "kernel-debug-devel-0:2.6.32-220.76.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional AUS (v. 6.2)",
"product_id": "6Server-optional-6.2.AUS:kernel-debug-devel-0:2.6.32-220.76.2.el6.x86_64"
},
"product_reference": "kernel-debug-devel-0:2.6.32-220.76.2.el6.x86_64",
"relates_to_product_reference": "6Server-optional-6.2.AUS"
},
{
"category": "default_component_of",
"full_product_name": {
"name": "kernel-debuginfo-0:2.6.32-220.76.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional AUS (v. 6.2)",
"product_id": "6Server-optional-6.2.AUS:kernel-debuginfo-0:2.6.32-220.76.2.el6.x86_64"
},
"product_reference": "kernel-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"relates_to_product_reference": "6Server-optional-6.2.AUS"
},
{
"category": "default_component_of",
"full_product_name": {
"name": "kernel-debuginfo-common-x86_64-0:2.6.32-220.76.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional AUS (v. 6.2)",
"product_id": "6Server-optional-6.2.AUS:kernel-debuginfo-common-x86_64-0:2.6.32-220.76.2.el6.x86_64"
},
"product_reference": "kernel-debuginfo-common-x86_64-0:2.6.32-220.76.2.el6.x86_64",
"relates_to_product_reference": "6Server-optional-6.2.AUS"
},
{
"category": "default_component_of",
"full_product_name": {
"name": "kernel-devel-0:2.6.32-220.76.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional AUS (v. 6.2)",
"product_id": "6Server-optional-6.2.AUS:kernel-devel-0:2.6.32-220.76.2.el6.x86_64"
},
"product_reference": "kernel-devel-0:2.6.32-220.76.2.el6.x86_64",
"relates_to_product_reference": "6Server-optional-6.2.AUS"
},
{
"category": "default_component_of",
"full_product_name": {
"name": "kernel-doc-0:2.6.32-220.76.2.el6.noarch as a component of Red Hat Enterprise Linux Server Optional AUS (v. 6.2)",
"product_id": "6Server-optional-6.2.AUS:kernel-doc-0:2.6.32-220.76.2.el6.noarch"
},
"product_reference": "kernel-doc-0:2.6.32-220.76.2.el6.noarch",
"relates_to_product_reference": "6Server-optional-6.2.AUS"
},
{
"category": "default_component_of",
"full_product_name": {
"name": "kernel-firmware-0:2.6.32-220.76.2.el6.noarch as a component of Red Hat Enterprise Linux Server Optional AUS (v. 6.2)",
"product_id": "6Server-optional-6.2.AUS:kernel-firmware-0:2.6.32-220.76.2.el6.noarch"
},
"product_reference": "kernel-firmware-0:2.6.32-220.76.2.el6.noarch",
"relates_to_product_reference": "6Server-optional-6.2.AUS"
},
{
"category": "default_component_of",
"full_product_name": {
"name": "kernel-headers-0:2.6.32-220.76.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional AUS (v. 6.2)",
"product_id": "6Server-optional-6.2.AUS:kernel-headers-0:2.6.32-220.76.2.el6.x86_64"
},
"product_reference": "kernel-headers-0:2.6.32-220.76.2.el6.x86_64",
"relates_to_product_reference": "6Server-optional-6.2.AUS"
},
{
"category": "default_component_of",
"full_product_name": {
"name": "perf-0:2.6.32-220.76.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional AUS (v. 6.2)",
"product_id": "6Server-optional-6.2.AUS:perf-0:2.6.32-220.76.2.el6.x86_64"
},
"product_reference": "perf-0:2.6.32-220.76.2.el6.x86_64",
"relates_to_product_reference": "6Server-optional-6.2.AUS"
},
{
"category": "default_component_of",
"full_product_name": {
"name": "perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional AUS (v. 6.2)",
"product_id": "6Server-optional-6.2.AUS:perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64"
},
"product_reference": "perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"relates_to_product_reference": "6Server-optional-6.2.AUS"
},
{
"category": "default_component_of",
"full_product_name": {
"name": "python-perf-0:2.6.32-220.76.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional AUS (v. 6.2)",
"product_id": "6Server-optional-6.2.AUS:python-perf-0:2.6.32-220.76.2.el6.x86_64"
},
"product_reference": "python-perf-0:2.6.32-220.76.2.el6.x86_64",
"relates_to_product_reference": "6Server-optional-6.2.AUS"
},
{
"category": "default_component_of",
"full_product_name": {
"name": "python-perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional AUS (v. 6.2)",
"product_id": "6Server-optional-6.2.AUS:python-perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64"
},
"product_reference": "python-perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"relates_to_product_reference": "6Server-optional-6.2.AUS"
}
]
},
"vulnerabilities": [
{
"acknowledgments": [
{
"names": [
"Google Project Zero"
]
}
],
"cve": "CVE-2017-5715",
"cwe": {
"id": "CWE-200",
"name": "Exposure of Sensitive Information to an Unauthorized Actor"
},
"discovery_date": "2017-11-30T00:00:00+00:00",
"ids": [
{
"system_name": "Red Hat Bugzilla ID",
"text": "1519780"
}
],
"notes": [
{
"category": "description",
"text": "An industry-wide issue was found in the way many modern microprocessor designs have implemented speculative execution of instructions (a commonly used performance optimization). There are three primary variants of the issue which differ in the way the speculative execution can be exploited. Variant CVE-2017-5715 triggers the speculative execution by utilizing branch target injection. It relies on the presence of a precisely-defined instruction sequence in the privileged code as well as the fact that memory accesses may cause allocation into the microprocessor\u0027s data cache even for speculatively executed instructions that never actually commit (retire). As a result, an unprivileged attacker could use this flaw to cross the syscall and guest/host boundaries and read privileged memory by conducting targeted cache side-channel attacks.",
"title": "Vulnerability description"
},
{
"category": "summary",
"text": "hw: cpu: speculative execution branch target injection",
"title": "Vulnerability summary"
},
{
"category": "other",
"text": "Please see the Vulnerability Response article for the full list of updates available and a detailed discussion of this issue.",
"title": "Statement"
},
{
"category": "general",
"text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
"title": "CVSS score applicability"
}
],
"product_status": {
"fixed": [
"6Server-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.src",
"6Server-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debug-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debug-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debug-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debuginfo-common-x86_64-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-doc-0:2.6.32-220.76.2.el6.noarch",
"6Server-6.2.AUS:kernel-firmware-0:2.6.32-220.76.2.el6.noarch",
"6Server-6.2.AUS:kernel-headers-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:python-perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:python-perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.src",
"6Server-optional-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debug-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debug-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debug-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debuginfo-common-x86_64-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-doc-0:2.6.32-220.76.2.el6.noarch",
"6Server-optional-6.2.AUS:kernel-firmware-0:2.6.32-220.76.2.el6.noarch",
"6Server-optional-6.2.AUS:kernel-headers-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:python-perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:python-perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64"
]
},
"references": [
{
"category": "self",
"summary": "Canonical URL",
"url": "https://access.redhat.com/security/cve/CVE-2017-5715"
},
{
"category": "external",
"summary": "RHBZ#1519780",
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=1519780"
},
{
"category": "external",
"summary": "RHSB-speculativeexecution",
"url": "https://access.redhat.com/security/vulnerabilities/speculativeexecution"
},
{
"category": "external",
"summary": "https://www.cve.org/CVERecord?id=CVE-2017-5715",
"url": "https://www.cve.org/CVERecord?id=CVE-2017-5715"
},
{
"category": "external",
"summary": "https://nvd.nist.gov/vuln/detail/CVE-2017-5715",
"url": "https://nvd.nist.gov/vuln/detail/CVE-2017-5715"
},
{
"category": "external",
"summary": "https://googleprojectzero.blogspot.com/2018/01/reading-privileged-memory-with-side.html",
"url": "https://googleprojectzero.blogspot.com/2018/01/reading-privileged-memory-with-side.html"
},
{
"category": "external",
"summary": "https://meltdownattack.com",
"url": "https://meltdownattack.com"
},
{
"category": "external",
"summary": "https://spectreattack.com/",
"url": "https://spectreattack.com/"
}
],
"release_date": "2018-01-03T22:00:00+00:00",
"remediations": [
{
"category": "vendor_fix",
"date": "2018-01-04T15:26:01+00:00",
"details": "For details on how to apply this update, which includes the changes described in this advisory, refer to:\n\nhttps://access.redhat.com/articles/11258\n\nThe system must be rebooted for this update to take effect.",
"product_ids": [
"6Server-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.src",
"6Server-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debug-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debug-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debug-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debuginfo-common-x86_64-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-doc-0:2.6.32-220.76.2.el6.noarch",
"6Server-6.2.AUS:kernel-firmware-0:2.6.32-220.76.2.el6.noarch",
"6Server-6.2.AUS:kernel-headers-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:python-perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:python-perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.src",
"6Server-optional-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debug-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debug-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debug-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debuginfo-common-x86_64-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-doc-0:2.6.32-220.76.2.el6.noarch",
"6Server-optional-6.2.AUS:kernel-firmware-0:2.6.32-220.76.2.el6.noarch",
"6Server-optional-6.2.AUS:kernel-headers-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:python-perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:python-perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64"
],
"restart_required": {
"category": "machine"
},
"url": "https://access.redhat.com/errata/RHSA-2018:0020"
}
],
"scores": [
{
"cvss_v3": {
"attackComplexity": "HIGH",
"attackVector": "LOCAL",
"availabilityImpact": "NONE",
"baseScore": 5.6,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "HIGH",
"integrityImpact": "NONE",
"privilegesRequired": "LOW",
"scope": "CHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N",
"version": "3.0"
},
"products": [
"6Server-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.src",
"6Server-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debug-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debug-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debug-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debuginfo-common-x86_64-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-doc-0:2.6.32-220.76.2.el6.noarch",
"6Server-6.2.AUS:kernel-firmware-0:2.6.32-220.76.2.el6.noarch",
"6Server-6.2.AUS:kernel-headers-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:python-perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:python-perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.src",
"6Server-optional-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debug-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debug-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debug-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debuginfo-common-x86_64-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-doc-0:2.6.32-220.76.2.el6.noarch",
"6Server-optional-6.2.AUS:kernel-firmware-0:2.6.32-220.76.2.el6.noarch",
"6Server-optional-6.2.AUS:kernel-headers-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:python-perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:python-perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64"
]
}
],
"threats": [
{
"category": "impact",
"details": "Important"
}
],
"title": "hw: cpu: speculative execution branch target injection"
},
{
"acknowledgments": [
{
"names": [
"Google Project Zero"
]
}
],
"cve": "CVE-2017-5753",
"cwe": {
"id": "CWE-200",
"name": "Exposure of Sensitive Information to an Unauthorized Actor"
},
"discovery_date": "2017-11-30T00:00:00+00:00",
"ids": [
{
"system_name": "Red Hat Bugzilla ID",
"text": "1519778"
}
],
"notes": [
{
"category": "description",
"text": "An industry-wide issue was found in the way many modern microprocessor designs have implemented speculative execution of instructions (a commonly used performance optimization). There are three primary variants of the issue which differ in the way the speculative execution can be exploited. Variant CVE-2017-5753 triggers the speculative execution by performing a bounds-check bypass. It relies on the presence of a precisely-defined instruction sequence in the privileged code as well as the fact that memory accesses may cause allocation into the microprocessor\u0027s data cache even for speculatively executed instructions that never actually commit (retire). As a result, an unprivileged attacker could use this flaw to cross the syscall boundary and read privileged memory by conducting targeted cache side-channel attacks.",
"title": "Vulnerability description"
},
{
"category": "summary",
"text": "hw: cpu: speculative execution bounds-check bypass",
"title": "Vulnerability summary"
},
{
"category": "other",
"text": "Red Hat Product Security is aware of this issue. Updates will be released as they become available. For additional information, please refer to the Red Hat Knowledgebase article: https://access.redhat.com/security/vulnerabilities/speculativeexecution",
"title": "Statement"
},
{
"category": "general",
"text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
"title": "CVSS score applicability"
}
],
"product_status": {
"fixed": [
"6Server-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.src",
"6Server-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debug-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debug-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debug-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debuginfo-common-x86_64-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-doc-0:2.6.32-220.76.2.el6.noarch",
"6Server-6.2.AUS:kernel-firmware-0:2.6.32-220.76.2.el6.noarch",
"6Server-6.2.AUS:kernel-headers-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:python-perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:python-perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.src",
"6Server-optional-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debug-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debug-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debug-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debuginfo-common-x86_64-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-doc-0:2.6.32-220.76.2.el6.noarch",
"6Server-optional-6.2.AUS:kernel-firmware-0:2.6.32-220.76.2.el6.noarch",
"6Server-optional-6.2.AUS:kernel-headers-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:python-perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:python-perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64"
]
},
"references": [
{
"category": "self",
"summary": "Canonical URL",
"url": "https://access.redhat.com/security/cve/CVE-2017-5753"
},
{
"category": "external",
"summary": "RHBZ#1519778",
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=1519778"
},
{
"category": "external",
"summary": "https://www.cve.org/CVERecord?id=CVE-2017-5753",
"url": "https://www.cve.org/CVERecord?id=CVE-2017-5753"
},
{
"category": "external",
"summary": "https://nvd.nist.gov/vuln/detail/CVE-2017-5753",
"url": "https://nvd.nist.gov/vuln/detail/CVE-2017-5753"
},
{
"category": "external",
"summary": "https://access.redhat.com/security/vulnerabilities/speculativeexecution",
"url": "https://access.redhat.com/security/vulnerabilities/speculativeexecution"
},
{
"category": "external",
"summary": "https://googleprojectzero.blogspot.com/2018/01/reading-privileged-memory-with-side.html",
"url": "https://googleprojectzero.blogspot.com/2018/01/reading-privileged-memory-with-side.html"
},
{
"category": "external",
"summary": "https://meltdownattack.com",
"url": "https://meltdownattack.com"
},
{
"category": "external",
"summary": "https://spectreattack.com/",
"url": "https://spectreattack.com/"
}
],
"release_date": "2018-01-03T22:00:00+00:00",
"remediations": [
{
"category": "vendor_fix",
"date": "2018-01-04T15:26:01+00:00",
"details": "For details on how to apply this update, which includes the changes described in this advisory, refer to:\n\nhttps://access.redhat.com/articles/11258\n\nThe system must be rebooted for this update to take effect.",
"product_ids": [
"6Server-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.src",
"6Server-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debug-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debug-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debug-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debuginfo-common-x86_64-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-doc-0:2.6.32-220.76.2.el6.noarch",
"6Server-6.2.AUS:kernel-firmware-0:2.6.32-220.76.2.el6.noarch",
"6Server-6.2.AUS:kernel-headers-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:python-perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:python-perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.src",
"6Server-optional-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debug-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debug-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debug-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debuginfo-common-x86_64-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-doc-0:2.6.32-220.76.2.el6.noarch",
"6Server-optional-6.2.AUS:kernel-firmware-0:2.6.32-220.76.2.el6.noarch",
"6Server-optional-6.2.AUS:kernel-headers-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:python-perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:python-perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64"
],
"restart_required": {
"category": "machine"
},
"url": "https://access.redhat.com/errata/RHSA-2018:0020"
}
],
"scores": [
{
"cvss_v3": {
"attackComplexity": "LOW",
"attackVector": "LOCAL",
"availabilityImpact": "NONE",
"baseScore": 5.5,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "HIGH",
"integrityImpact": "NONE",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N",
"version": "3.0"
},
"products": [
"6Server-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.src",
"6Server-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debug-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debug-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debug-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debuginfo-common-x86_64-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-doc-0:2.6.32-220.76.2.el6.noarch",
"6Server-6.2.AUS:kernel-firmware-0:2.6.32-220.76.2.el6.noarch",
"6Server-6.2.AUS:kernel-headers-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:python-perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:python-perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.src",
"6Server-optional-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debug-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debug-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debug-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debuginfo-common-x86_64-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-doc-0:2.6.32-220.76.2.el6.noarch",
"6Server-optional-6.2.AUS:kernel-firmware-0:2.6.32-220.76.2.el6.noarch",
"6Server-optional-6.2.AUS:kernel-headers-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:python-perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:python-perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64"
]
}
],
"threats": [
{
"category": "impact",
"details": "Important"
}
],
"title": "hw: cpu: speculative execution bounds-check bypass"
},
{
"acknowledgments": [
{
"names": [
"Google Project Zero"
]
}
],
"cve": "CVE-2017-5754",
"cwe": {
"id": "CWE-200",
"name": "Exposure of Sensitive Information to an Unauthorized Actor"
},
"discovery_date": "2017-11-30T00:00:00+00:00",
"ids": [
{
"system_name": "Red Hat Bugzilla ID",
"text": "1519781"
}
],
"notes": [
{
"category": "description",
"text": "An industry-wide issue was found in the way many modern microprocessor designs have implemented speculative execution of instructions (a commonly used performance optimization). There are three primary variants of the issue which differ in the way the speculative execution can be exploited. Variant CVE-2017-5754 relies on the fact that, on impacted microprocessors, during speculative execution of instruction permission faults, exception generation triggered by a faulting access is suppressed until the retirement of the whole instruction block. In a combination with the fact that memory accesses may populate the cache even when the block is being dropped and never committed (executed), an unprivileged local attacker could use this flaw to read privileged (kernel space) memory by conducting targeted cache side-channel attacks. Note: CVE-2017-5754 affects Intel x86-64 microprocessors. AMD x86-64 microprocessors are not affected by this issue.",
"title": "Vulnerability description"
},
{
"category": "summary",
"text": "hw: cpu: speculative execution permission faults handling",
"title": "Vulnerability summary"
},
{
"category": "other",
"text": "Please see the Vulnerability Response article for the full list of updates available and a detailed discussion of this issue.\n\nMeltdown patches for 32-bit Red Hat Enterprise Linux 5\n------------------------------------------------------\n\nRed Hat has no current plans to provide mitigations for the Meltdown vulnerability in 32-bit Red Hat Enterprise Linux 5 environments.\n\nFollowing many hours of engineering investigation and analysis, Red Hat has determined that introducing changes to the Red Hat Enterprise Linux 5 environment would destabilize customer deployments and violate our application binary interface (ABI) and kernel ABI commitments to customers who rely on Red Hat Enterprise Linux 5 to be absolutely stable.\n\nAlthough Red Hat has delivered patches to mitigate the Meltdown vulnerability in other supported product offerings, the 32-bit Red Hat Enterprise Linux 5 environment presents unique challenges. The combination of limited address space in 32-bit environments plus the mechanism for passing control from the userspace to kernel and limitations on the stack during this transfer make the projected changes too invasive and disruptive for deployments that require the highest level of system stability. By contrast, 32-bit Meltdown mitigations have been delivered for Red Hat Enterprise Linux 6, where the changes are far less invasive and risky.",
"title": "Statement"
},
{
"category": "general",
"text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
"title": "CVSS score applicability"
}
],
"product_status": {
"fixed": [
"6Server-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.src",
"6Server-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debug-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debug-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debug-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debuginfo-common-x86_64-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-doc-0:2.6.32-220.76.2.el6.noarch",
"6Server-6.2.AUS:kernel-firmware-0:2.6.32-220.76.2.el6.noarch",
"6Server-6.2.AUS:kernel-headers-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:python-perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:python-perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.src",
"6Server-optional-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debug-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debug-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debug-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debuginfo-common-x86_64-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-doc-0:2.6.32-220.76.2.el6.noarch",
"6Server-optional-6.2.AUS:kernel-firmware-0:2.6.32-220.76.2.el6.noarch",
"6Server-optional-6.2.AUS:kernel-headers-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:python-perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:python-perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64"
]
},
"references": [
{
"category": "self",
"summary": "Canonical URL",
"url": "https://access.redhat.com/security/cve/CVE-2017-5754"
},
{
"category": "external",
"summary": "RHBZ#1519781",
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=1519781"
},
{
"category": "external",
"summary": "RHSB-speculativeexecution",
"url": "https://access.redhat.com/security/vulnerabilities/speculativeexecution"
},
{
"category": "external",
"summary": "https://www.cve.org/CVERecord?id=CVE-2017-5754",
"url": "https://www.cve.org/CVERecord?id=CVE-2017-5754"
},
{
"category": "external",
"summary": "https://nvd.nist.gov/vuln/detail/CVE-2017-5754",
"url": "https://nvd.nist.gov/vuln/detail/CVE-2017-5754"
},
{
"category": "external",
"summary": "https://googleprojectzero.blogspot.com/2018/01/reading-privileged-memory-with-side.html",
"url": "https://googleprojectzero.blogspot.com/2018/01/reading-privileged-memory-with-side.html"
},
{
"category": "external",
"summary": "https://meltdownattack.com",
"url": "https://meltdownattack.com"
},
{
"category": "external",
"summary": "https://spectreattack.com/",
"url": "https://spectreattack.com/"
}
],
"release_date": "2018-01-03T22:00:00+00:00",
"remediations": [
{
"category": "vendor_fix",
"date": "2018-01-04T15:26:01+00:00",
"details": "For details on how to apply this update, which includes the changes described in this advisory, refer to:\n\nhttps://access.redhat.com/articles/11258\n\nThe system must be rebooted for this update to take effect.",
"product_ids": [
"6Server-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.src",
"6Server-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debug-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debug-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debug-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debuginfo-common-x86_64-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-doc-0:2.6.32-220.76.2.el6.noarch",
"6Server-6.2.AUS:kernel-firmware-0:2.6.32-220.76.2.el6.noarch",
"6Server-6.2.AUS:kernel-headers-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:python-perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:python-perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.src",
"6Server-optional-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debug-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debug-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debug-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debuginfo-common-x86_64-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-doc-0:2.6.32-220.76.2.el6.noarch",
"6Server-optional-6.2.AUS:kernel-firmware-0:2.6.32-220.76.2.el6.noarch",
"6Server-optional-6.2.AUS:kernel-headers-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:python-perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:python-perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64"
],
"restart_required": {
"category": "machine"
},
"url": "https://access.redhat.com/errata/RHSA-2018:0020"
}
],
"scores": [
{
"cvss_v3": {
"attackComplexity": "LOW",
"attackVector": "LOCAL",
"availabilityImpact": "NONE",
"baseScore": 5.5,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "HIGH",
"integrityImpact": "NONE",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N",
"version": "3.0"
},
"products": [
"6Server-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.src",
"6Server-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debug-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debug-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debug-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-debuginfo-common-x86_64-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:kernel-doc-0:2.6.32-220.76.2.el6.noarch",
"6Server-6.2.AUS:kernel-firmware-0:2.6.32-220.76.2.el6.noarch",
"6Server-6.2.AUS:kernel-headers-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:python-perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-6.2.AUS:python-perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.src",
"6Server-optional-6.2.AUS:kernel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debug-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debug-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debug-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-debuginfo-common-x86_64-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-devel-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:kernel-doc-0:2.6.32-220.76.2.el6.noarch",
"6Server-optional-6.2.AUS:kernel-firmware-0:2.6.32-220.76.2.el6.noarch",
"6Server-optional-6.2.AUS:kernel-headers-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:python-perf-0:2.6.32-220.76.2.el6.x86_64",
"6Server-optional-6.2.AUS:python-perf-debuginfo-0:2.6.32-220.76.2.el6.x86_64"
]
}
],
"threats": [
{
"category": "impact",
"details": "Important"
}
],
"title": "hw: cpu: speculative execution permission faults handling"
}
]
}
Loading...
Loading...
Sightings
| Author | Source | Type | Date |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
- Confirmed: The vulnerability is confirmed from an analyst perspective.
- Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
- Patched: This vulnerability was successfully patched by the user reporting the sighting.
- Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
- Not confirmed: The user expresses doubt about the veracity of the vulnerability.
- Not patched: This vulnerability was not successfully patched by the user reporting the sighting.