SSA-781903
Vulnerability from csaf_siemens - Published: 2026-08-11 00:00 - Updated: 2026-08-11 00:00Summary
SSA-781903: Denial of Service Vulnerability in Desigo DXR and PXC Controllers
Notes
Summary: A vulnerability in Desigo DXR and PXC controllers has been identified that could allow an attacker to cause denial of service conditions by sending malformed BACnet packets. Recovery requires a device reset or reboot to restore normal functionality.
Siemens has released new versions for the affected products and recommends to update to the latest versions.
General Recommendations: As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens' operational guidelines for Industrial Security (Download: https://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.
Additional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity
Additional Resources: For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories
Terms of Use: The use of Siemens Security Advisories is subject to the terms and conditions listed on: https://www.siemens.com/productcert/terms-of-use.
The affected devices are vulnerable to a denial-of-service (DoS) vulnerability. An attacker can exploit this issue by sending a malformed BACnet packet, causing the device to stop responding to BACnet queries. Recovery requires a device reset or reboot to restore normal functionality.
4.3 (Medium)
Affected products
Known affected
6 products
| Product | Identifier | Version | Remediation |
|---|---|---|---|
|
Desigo DXR2 < V01.21.233.16-7862
Siemens / Desigo DXR2
|
vers:intdot/<01.21.233.16-7862 |
Vendor Fix
|
|
|
Desigo PXC3 < V01.21.233.16-7862
Siemens / Desigo PXC3
|
vers:intdot/<01.21.233.16-7862 |
Vendor Fix
|
|
|
Desigo PXC4 < V02.21.194.36-2715
Siemens / Desigo PXC4
|
vers:intdot/<02.21.194.36-2715 |
Vendor Fix
|
|
|
Desigo PXC5.E003 < V02.21.194.36-2715
Siemens / Desigo PXC5.E003
|
vers:intdot/<02.21.194.36-2715 |
Vendor Fix
|
|
|
Desigo PXC5.E24 < V02.21.194.36-2715
Siemens / Desigo PXC5.E24
|
vers:intdot/<02.21.194.36-2715 |
Vendor Fix
|
|
|
Desigo PXC7 < V02.21.194.36-2715
Siemens / Desigo PXC7
|
vers:intdot/<02.21.194.36-2715 |
Vendor Fix
|
References
2 references
{
"document": {
"category": "csaf_security_advisory",
"csaf_version": "2.0",
"distribution": {
"text": "Disclosure is not limited. (TLPv2: TLP:CLEAR)",
"tlp": {
"label": "WHITE"
}
},
"lang": "en",
"notes": [
{
"category": "summary",
"text": "A vulnerability in Desigo DXR and PXC controllers has been identified that could allow an attacker to cause denial of service conditions by sending malformed BACnet packets. Recovery requires a device reset or reboot to restore normal functionality.\n\nSiemens has released new versions for the affected products and recommends to update to the latest versions.",
"title": "Summary"
},
{
"category": "general",
"text": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: https://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
"title": "General Recommendations"
},
{
"category": "general",
"text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
"title": "Additional Resources"
},
{
"category": "legal_disclaimer",
"text": "The use of Siemens Security Advisories is subject to the terms and conditions listed on: https://www.siemens.com/productcert/terms-of-use.",
"title": "Terms of Use"
}
],
"publisher": {
"category": "vendor",
"contact_details": "productcert@siemens.com",
"name": "Siemens ProductCERT",
"namespace": "https://www.siemens.com"
},
"references": [
{
"category": "self",
"summary": "SSA-781903: Denial of Service Vulnerability in Desigo DXR and PXC Controllers - HTML Version",
"url": "https://cert-portal.siemens.com/productcert/html/ssa-781903.html"
},
{
"category": "self",
"summary": "SSA-781903: Denial of Service Vulnerability in Desigo DXR and PXC Controllers - CSAF Version",
"url": "https://cert-portal.siemens.com/productcert/csaf/ssa-781903.json"
}
],
"title": "SSA-781903: Denial of Service Vulnerability in Desigo DXR and PXC Controllers",
"tracking": {
"current_release_date": "2026-08-11T00:00:00.000Z",
"generator": {
"engine": {
"name": "Siemens ProductCERT CSAF Generator",
"version": "1"
}
},
"id": "SSA-781903",
"initial_release_date": "2026-08-11T00:00:00.000Z",
"revision_history": [
{
"date": "2026-08-11T00:00:00.000Z",
"legacy_version": "1.0",
"number": "1",
"summary": "Publication Date"
}
],
"status": "interim",
"version": "1"
}
},
"product_tree": {
"branches": [
{
"branches": [
{
"branches": [
{
"category": "product_version_range",
"name": "vers:intdot/\u003c01.21.233.16-7862",
"product": {
"name": "Desigo DXR2 \u003c V01.21.233.16-7862",
"product_id": "1"
}
}
],
"category": "product_name",
"name": "Desigo DXR2"
},
{
"branches": [
{
"category": "product_version_range",
"name": "vers:intdot/\u003c01.21.233.16-7862",
"product": {
"name": "Desigo PXC3 \u003c V01.21.233.16-7862",
"product_id": "2"
}
}
],
"category": "product_name",
"name": "Desigo PXC3"
},
{
"branches": [
{
"category": "product_version_range",
"name": "vers:intdot/\u003c02.21.194.36-2715",
"product": {
"name": "Desigo PXC4 \u003c V02.21.194.36-2715",
"product_id": "3"
}
}
],
"category": "product_name",
"name": "Desigo PXC4"
},
{
"branches": [
{
"category": "product_version_range",
"name": "vers:intdot/\u003c02.21.194.36-2715",
"product": {
"name": "Desigo PXC5.E003 \u003c V02.21.194.36-2715",
"product_id": "4"
}
}
],
"category": "product_name",
"name": "Desigo PXC5.E003"
},
{
"branches": [
{
"category": "product_version_range",
"name": "vers:intdot/\u003c02.21.194.36-2715",
"product": {
"name": "Desigo PXC5.E24 \u003c V02.21.194.36-2715",
"product_id": "5"
}
}
],
"category": "product_name",
"name": "Desigo PXC5.E24"
},
{
"branches": [
{
"category": "product_version_range",
"name": "vers:intdot/\u003c02.21.194.36-2715",
"product": {
"name": "Desigo PXC7 \u003c V02.21.194.36-2715",
"product_id": "6"
}
}
],
"category": "product_name",
"name": "Desigo PXC7"
}
],
"category": "vendor",
"name": "Siemens"
}
]
},
"vulnerabilities": [
{
"cve": "CVE-2026-59693",
"cwe": {
"id": "CWE-754",
"name": "Improper Check for Unusual or Exceptional Conditions"
},
"notes": [
{
"category": "description",
"text": "The affected devices are vulnerable to a denial-of-service (DoS) vulnerability. An attacker can exploit this issue by sending a malformed BACnet packet, causing the device to stop responding to BACnet queries. Recovery requires a device reset or reboot to restore normal functionality.",
"title": "CVE Description"
}
],
"product_status": {
"known_affected": [
"1",
"2",
"3",
"4",
"5",
"6"
]
},
"remediations": [
{
"category": "vendor_fix",
"details": "Update to V01.21.233.16-7862 or later version\nPlease contact your local Siemens office for additional support in obtaining the update.",
"product_ids": [
"1",
"2"
]
},
{
"category": "vendor_fix",
"details": "Update to V02.21.194.36-2715 or later version\nPlease contact your local Siemens office for additional support in obtaining the update.",
"product_ids": [
"3",
"4",
"5",
"6"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 4.3,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
"version": "3.1"
},
"products": [
"1",
"2",
"3",
"4",
"5",
"6"
]
}
],
"title": "CVE-2026-59693"
}
]
}
Loading…
Loading…
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
Loading…
Loading…