GCVE Workshop - 22 September 2026 (14:00-18:00), Luxembourg Before The Vulnopticon Conference - Registration

CVE-2025-26603 (GCVE-0-2025-26603)

Vulnerability from cvelistv5 – Published: 2025-02-18 19:04 – Updated: 2025-03-07 00:10
VLAI
Title
heap-use-after-free in function str_to_reg in vim/vim
Summary
Vim is a greatly improved version of the good old UNIX editor Vi. Vim allows to redirect screen messages using the `:redir` ex command to register, variables and files. It also allows to show the contents of registers using the `:registers` or `:display` ex command. When redirecting the output of `:display` to a register, Vim will free the register content before storing the new content in the register. Now when redirecting the `:display` command to a register that is being displayed, Vim will free the content while shortly afterwards trying to access it, which leads to a use-after-free. Vim pre 9.1.1115 checks in the ex_display() function, that it does not try to redirect to a register while displaying this register at the same time. However this check is not complete, and so Vim does not check the `+` and `*` registers (which typically donate the X11/clipboard registers, and when a clipboard connection is not possible will fall back to use register 0 instead. In Patch 9.1.1115 Vim will therefore skip outputting to register zero when trying to redirect to the clipboard registers `*` or `+`. Users are advised to upgrade. There are no known workarounds for this vulnerability.
Severity
4.2 (Medium)
CVSS:3.1/AV:L/AC:H/PR:L/UI:R/S:U/C:L/I:L/A:L
SSVC
Exploitation: none Automatable: no Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2025-02-19 14:42 UTC
CWE
Assigner
References
Impacted products
Vendor Product Version CPE status
vim vim Affected: < 9.1.1115
guessed Create a notification for this product.
Show details on NVD website
To clipboard 

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2025-26603",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2025-02-19T14:42:36.300267Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2025-02-19T15:15:59.589Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      },
      {
        "providerMetadata": {
          "dateUpdated": "2025-03-07T00:10:51.265Z",
          "orgId": "af854a3a-2127-422b-91ae-364da2661108",
          "shortName": "CVE"
        },
        "references": [
          {
            "url": "https://security.netapp.com/advisory/ntap-20250306-0003/"
          }
        ],
        "title": "CVE Program Container"
      }
    ],
    "cna": {
      "affected": [
        {
          "product": "vim",
          "vendor": "vim",
          "versions": [
            {
              "status": "affected",
              "version": "\u003c 9.1.1115"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "Vim is a greatly improved version of the good old UNIX editor Vi. Vim allows to redirect screen messages using the `:redir` ex command to register, variables and files. It also allows to show the contents of registers using the `:registers` or `:display` ex command. When redirecting the output of `:display` to a register, Vim will free the register content before storing the new content in the register. Now when redirecting the `:display` command to a register that is being displayed, Vim will free the content while shortly afterwards trying to access it, which leads to a use-after-free. Vim pre 9.1.1115 checks in the ex_display() function, that it does not try to redirect to a register while displaying this register at the same time. However this check is not complete, and so Vim does not check the `+` and `*` registers (which typically donate the X11/clipboard registers, and when a clipboard connection is not possible will fall back to use register 0 instead. In Patch 9.1.1115 Vim will therefore skip outputting to register zero when trying to redirect to the clipboard registers `*` or `+`. Users are advised to upgrade. There are no known workarounds for this vulnerability."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "attackComplexity": "HIGH",
            "attackVector": "LOCAL",
            "availabilityImpact": "LOW",
            "baseScore": 4.2,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "LOW",
            "integrityImpact": "LOW",
            "privilegesRequired": "LOW",
            "scope": "UNCHANGED",
            "userInteraction": "REQUIRED",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:R/S:U/C:L/I:L/A:L",
            "version": "3.1"
          }
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-416",
              "description": "CWE-416: Use After Free",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2025-02-18T19:04:24.273Z",
        "orgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
        "shortName": "GitHub_M"
      },
      "references": [
        {
          "name": "https://github.com/vim/vim/security/advisories/GHSA-63p5-mwg2-787v",
          "tags": [
            "x_refsource_CONFIRM"
          ],
          "url": "https://github.com/vim/vim/security/advisories/GHSA-63p5-mwg2-787v"
        },
        {
          "name": "https://github.com/vim/vim/commit/c0f0e2380e5954f4a52a131bf6b8",
          "tags": [
            "x_refsource_MISC"
          ],
          "url": "https://github.com/vim/vim/commit/c0f0e2380e5954f4a52a131bf6b8"
        }
      ],
      "source": {
        "advisory": "GHSA-63p5-mwg2-787v",
        "discovery": "UNKNOWN"
      },
      "title": "heap-use-after-free in function str_to_reg in vim/vim"
    }
  },
  "cveMetadata": {
    "assignerOrgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
    "assignerShortName": "GitHub_M",
    "cveId": "CVE-2025-26603",
    "datePublished": "2025-02-18T19:04:24.273Z",
    "dateReserved": "2025-02-12T14:51:02.717Z",
    "dateUpdated": "2025-03-07T00:10:51.265Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.1",
  "vulnerability-lookup:meta": {
    "epss": {
      "cve": "CVE-2025-26603",
      "date": "2026-09-19",
      "epss": "0.00237",
      "percentile": "0.15068"
    },
    "nvd": {
      "cve": {
        "affected": [
          {
            "affectedData": [
              {
                "product": "vim",
                "vendor": "vim",
                "versions": [
                  {
                    "status": "affected",
                    "version": "\u003c 9.1.1115"
                  }
                ]
              }
            ],
            "source": "security-advisories@github.com"
          }
        ],
        "configurations": [
          {
            "nodes": [
              {
                "cpeMatch": [
                  {
                    "criteria": "cpe:2.3:a:vim:vim:*:*:*:*:*:*:*:*",
                    "matchCriteriaId": "638C932E-CC77-47D5-8080-4F169889AD8D",
                    "versionEndExcluding": "9.1.1115",
                    "vulnerable": true
                  }
                ],
                "negate": false,
                "operator": "OR"
              }
            ]
          },
          {
            "nodes": [
              {
                "cpeMatch": [
                  {
                    "criteria": "cpe:2.3:h:netapp:hci_compute_node:-:*:*:*:*:*:*:*",
                    "matchCriteriaId": "AD7447BC-F315-4298-A822-549942FC118B",
                    "vulnerable": true
                  }
                ],
                "negate": false,
                "operator": "OR"
              }
            ]
          }
        ],
        "cveTags": [],
        "descriptions": [
          {
            "lang": "en",
            "value": "Vim is a greatly improved version of the good old UNIX editor Vi. Vim allows to redirect screen messages using the `:redir` ex command to register, variables and files. It also allows to show the contents of registers using the `:registers` or `:display` ex command. When redirecting the output of `:display` to a register, Vim will free the register content before storing the new content in the register. Now when redirecting the `:display` command to a register that is being displayed, Vim will free the content while shortly afterwards trying to access it, which leads to a use-after-free. Vim pre 9.1.1115 checks in the ex_display() function, that it does not try to redirect to a register while displaying this register at the same time. However this check is not complete, and so Vim does not check the `+` and `*` registers (which typically donate the X11/clipboard registers, and when a clipboard connection is not possible will fall back to use register 0 instead. In Patch 9.1.1115 Vim will therefore skip outputting to register zero when trying to redirect to the clipboard registers `*` or `+`. Users are advised to upgrade. There are no known workarounds for this vulnerability."
          },
          {
            "lang": "es",
            "value": "VIM es una versi\u00f3n muy mejorada del buen editor de Unix VI. VIM permite redirigir mensajes de pantalla utilizando el comando `: redir` ex para registrarse, variables y archivos. Tambi\u00e9n permite mostrar el contenido de los registros utilizando el comando `: Registros` o`: Display` ex. Al redirigir la salida de `: Display` a un registro, VIM liberar\u00e1 el contenido de registro antes de almacenar el nuevo contenido en el registro. Ahora, al redirigir el comando `: Display` a un registro que se muestra, VIM liberar\u00e1 el contenido mientras que poco despu\u00e9s intenta acceder a \u00e9l, lo que conduce a un use-after-free. VIM PRE 9.1.1115 verifica la funci\u00f3n ex_display (), que no intenta redirigir a un registro al mostrar este registro al mismo tiempo. Sin embargo, esta verificaci\u00f3n no est\u00e1 completa, por lo que VIM no verifica los registros `+` y `*` que generalmente donan los registros X11/Portapaplos, y cuando una conexi\u00f3n de portapapeles no es posible volver\u00e1 a usar el registro 0. Patch 9.1.1115 VIM, por lo tanto, se saltar\u00e1 la salida para registrar cero al intentar redirigir a los registros de portapapeles `*` o `+`. No se conocen workarounds para esta vulnerabilidad."
          }
        ],
        "id": "CVE-2025-26603",
        "lastModified": "2026-06-17T09:02:06.700",
        "metrics": {
          "cvssMetricV31": [
            {
              "cvssData": {
                "attackComplexity": "HIGH",
                "attackVector": "LOCAL",
                "availabilityImpact": "LOW",
                "baseScore": 4.2,
                "baseSeverity": "MEDIUM",
                "confidentialityImpact": "LOW",
                "integrityImpact": "LOW",
                "privilegesRequired": "LOW",
                "scope": "UNCHANGED",
                "userInteraction": "REQUIRED",
                "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:R/S:U/C:L/I:L/A:L",
                "version": "3.1"
              },
              "exploitabilityScore": 0.8,
              "impactScore": 3.4,
              "source": "security-advisories@github.com",
              "type": "Secondary"
            }
          ],
          "ssvcV203": [
            {
              "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
              "ssvcData": {
                "id": "CVE-2025-26603",
                "options": [
                  {
                    "exploitation": "none"
                  },
                  {
                    "automatable": "no"
                  },
                  {
                    "technicalImpact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2025-02-19T14:42:36.300267Z",
                "version": "2.0.3"
              }
            }
          ]
        },
        "published": "2025-02-18T19:15:29.387",
        "references": [
          {
            "source": "security-advisories@github.com",
            "tags": [
              "Patch"
            ],
            "url": "https://github.com/vim/vim/commit/c0f0e2380e5954f4a52a131bf6b8"
          },
          {
            "source": "security-advisories@github.com",
            "tags": [
              "Vendor Advisory"
            ],
            "url": "https://github.com/vim/vim/security/advisories/GHSA-63p5-mwg2-787v"
          },
          {
            "source": "af854a3a-2127-422b-91ae-364da2661108",
            "tags": [
              "Third Party Advisory"
            ],
            "url": "https://security.netapp.com/advisory/ntap-20250306-0003/"
          }
        ],
        "sourceIdentifier": "security-advisories@github.com",
        "vulnStatus": "Analyzed",
        "weaknesses": [
          {
            "description": [
              {
                "lang": "en",
                "value": "CWE-416"
              }
            ],
            "source": "security-advisories@github.com",
            "type": "Secondary"
          }
        ]
      }
    },
    "redhat_vex": {
      "aggregate_severity": "Low",
      "current_release_date": "2026-08-21T12:51:31+00:00",
      "cve": "CVE-2025-26603",
      "id": "CVE-2025-26603",
      "initial_release_date": "2025-02-18T19:04:24.273000+00:00",
      "product_status:known_affected": "33",
      "source": "Red Hat CSAF VEX",
      "status": "final",
      "title": "vim: heap-use-after-free in function str_to_reg in vim/vim",
      "url": "https://security.access.redhat.com/data/csaf/v2/vex/2025/cve-2025-26603.json",
      "version": "3"
    },
    "suse_vex": {
      "aggregate_severity": "moderate",
      "current_release_date": "2026-08-31T00:21:55Z",
      "cve": "CVE-2025-26603",
      "id": "CVE-2025-26603",
      "initial_release_date": "2025-02-20T14:30:20Z",
      "product_status:known_not_affected": "305",
      "source": "SUSE CSAF VEX",
      "status": "interim",
      "title": "SUSE CVE CVE-2025-26603",
      "url": "https://ftp.suse.com/pub/projects/security/csaf-vex/cve-2025-26603.json",
      "version": "16"
    },
    "vulnrichment": {
      "containers": {
        "adp": [
          {
            "providerMetadata": {
              "dateUpdated": "2025-03-07T00:10:51.265Z",
              "orgId": "af854a3a-2127-422b-91ae-364da2661108",
              "shortName": "CVE"
            },
            "references": [
              {
                "url": "https://security.netapp.com/advisory/ntap-20250306-0003/"
              }
            ],
            "title": "CVE Program Container"
          },
          {
            "metrics": [
              {
                "other": {
                  "content": {
                    "id": "CVE-2025-26603",
                    "options": [
                      {
                        "Exploitation": "none"
                      },
                      {
                        "Automatable": "no"
                      },
                      {
                        "Technical Impact": "partial"
                      }
                    ],
                    "role": "CISA Coordinator",
                    "timestamp": "2025-02-19T14:42:36.300267Z",
                    "version": "2.0.3"
                  },
                  "type": "ssvc"
                }
              }
            ],
            "providerMetadata": {
              "dateUpdated": "2025-02-19T14:42:37.645Z",
              "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
              "shortName": "CISA-ADP"
            },
            "title": "CISA ADP Vulnrichment"
          }
        ],
        "cna": {
          "affected": [
            {
              "product": "vim",
              "vendor": "vim",
              "versions": [
                {
                  "status": "affected",
                  "version": "\u003c 9.1.1115"
                }
              ]
            }
          ],
          "descriptions": [
            {
              "lang": "en",
              "value": "Vim is a greatly improved version of the good old UNIX editor Vi. Vim allows to redirect screen messages using the `:redir` ex command to register, variables and files. It also allows to show the contents of registers using the `:registers` or `:display` ex command. When redirecting the output of `:display` to a register, Vim will free the register content before storing the new content in the register. Now when redirecting the `:display` command to a register that is being displayed, Vim will free the content while shortly afterwards trying to access it, which leads to a use-after-free. Vim pre 9.1.1115 checks in the ex_display() function, that it does not try to redirect to a register while displaying this register at the same time. However this check is not complete, and so Vim does not check the `+` and `*` registers (which typically donate the X11/clipboard registers, and when a clipboard connection is not possible will fall back to use register 0 instead. In Patch 9.1.1115 Vim will therefore skip outputting to register zero when trying to redirect to the clipboard registers `*` or `+`. Users are advised to upgrade. There are no known workarounds for this vulnerability."
            }
          ],
          "metrics": [
            {
              "cvssV3_1": {
                "attackComplexity": "HIGH",
                "attackVector": "LOCAL",
                "availabilityImpact": "LOW",
                "baseScore": 4.2,
                "baseSeverity": "MEDIUM",
                "confidentialityImpact": "LOW",
                "integrityImpact": "LOW",
                "privilegesRequired": "LOW",
                "scope": "UNCHANGED",
                "userInteraction": "REQUIRED",
                "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:R/S:U/C:L/I:L/A:L",
                "version": "3.1"
              }
            }
          ],
          "problemTypes": [
            {
              "descriptions": [
                {
                  "cweId": "CWE-416",
                  "description": "CWE-416: Use After Free",
                  "lang": "en",
                  "type": "CWE"
                }
              ]
            }
          ],
          "providerMetadata": {
            "dateUpdated": "2025-02-18T19:04:24.273Z",
            "orgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
            "shortName": "GitHub_M"
          },
          "references": [
            {
              "name": "https://github.com/vim/vim/security/advisories/GHSA-63p5-mwg2-787v",
              "tags": [
                "x_refsource_CONFIRM"
              ],
              "url": "https://github.com/vim/vim/security/advisories/GHSA-63p5-mwg2-787v"
            },
            {
              "name": "https://github.com/vim/vim/commit/c0f0e2380e5954f4a52a131bf6b8",
              "tags": [
                "x_refsource_MISC"
              ],
              "url": "https://github.com/vim/vim/commit/c0f0e2380e5954f4a52a131bf6b8"
            }
          ],
          "source": {
            "advisory": "GHSA-63p5-mwg2-787v",
            "discovery": "UNKNOWN"
          },
          "title": "heap-use-after-free in function str_to_reg in vim/vim"
        }
      },
      "cveMetadata": {
        "assignerOrgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
        "assignerShortName": "GitHub_M",
        "cveId": "CVE-2025-26603",
        "datePublished": "2025-02-18T19:04:24.273Z",
        "dateReserved": "2025-02-12T14:51:02.717Z",
        "dateUpdated": "2025-03-07T00:10:51.265Z",
        "state": "PUBLISHED"
      },
      "dataType": "CVE_RECORD",
      "dataVersion": "5.1"
    }
  }
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.





Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.


Detection rules are retrieved from Rulezet.


Related by attack behaviour

Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.