CVE-2026-11985 (GCVE-0-2026-11985)

Vulnerability from cvelistv5 – Published: 2026-08-11 04:56 – Updated: 2026-08-31 23:13
VLAI
Title
Cross-thread FPU register leak on ARM when FPU enabled without register sharing
Summary
On the Zephyr ARM port, enabling the hardware FPU (CONFIG_FPU) forces the "Floating point ABI" choice, which defaults to CONFIG_FP_HARDABI. Both FP_HARDABI and FP_SOFTABI permit the compiler to emit hardware FP instructions in any function, even code that never uses floating-point types. However, the callee-saved FP registers (s16-s31 / d8-d15) are only saved and restored across a context switch when CONFIG_FPU_SHARING is enabled (arch/arm/core/cortex_m/swap_helper.S and arch/arm/core/cortex_a_r/swap_helper.S), and prior to this fix selecting an ABI did not enable FPU register sharing, which defaults off. In a build that enables the FPU with the default ABI but leaves CONFIG_FPU_SHARING disabled, the kernel preserves no callee-saved FP register state across thread switches. The documented precondition for this "unshared" mode — that only a single thread ever executes FP instructions — is silently violated because the compiler may generate FP instructions in every thread. Under CONFIG_USERSPACE, where threads are mutually isolated, this becomes an information-disclosure boundary crossing: a victim thread can leave secret-derived values in s16-s31, and a co-resident unprivileged thread can read those registers directly (FP register access is not privilege-gated), recovering data left behind by another thread. Without userspace the same defect causes cross-thread FP state corruption (a correctness fault). The leak is bounded to the 16 callee-saved single-precision registers and is opportunistic, so impact is low. The fix makes FP_HARDABI and FP_SOFTABI select CONFIG_FPU_SHARING and tags every thread with K_FP_REGS at creation, so callee-saved FP state is always preserved across context switches whenever the compiler may emit FP instructions.
SSVC
Exploitation: none Automatable: no Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-08-11 17:55 UTC
CWE
Assigner
zephyr CNA under the mitre root
CNA scorecard B 77/100 over 194 records in the last 180 days details
Impacted products
Vendor Product Version CPE status
zephyrproject zephyr Affected: 1.13.0 , < 4.4.2 (semver)
guessed Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-11985",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-08-11T17:55:04.091131Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-08-11T17:55:22.188Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
          "defaultStatus": "unaffected",
          "packageName": "zephyr",
          "product": "zephyr",
          "programFiles": [
            "arch/Kconfig",
            "arch/arm/core/Kconfig",
            "arch/arm/core/cortex_a_r/thread.c",
            "arch/arm/core/cortex_m/thread.c"
          ],
          "vendor": "zephyrproject",
          "versions": [
            {
              "lessThan": "4.4.2",
              "status": "affected",
              "version": "1.13.0",
              "versionType": "semver"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "On the Zephyr ARM port, enabling the hardware FPU (CONFIG_FPU) forces the \"Floating point ABI\" choice, which defaults to CONFIG_FP_HARDABI. Both FP_HARDABI and FP_SOFTABI permit the compiler to emit hardware FP instructions in any function, even code that never uses floating-point types. However, the callee-saved FP registers (s16-s31 / d8-d15) are only saved and restored across a context switch when CONFIG_FPU_SHARING is enabled (arch/arm/core/cortex_m/swap_helper.S and arch/arm/core/cortex_a_r/swap_helper.S), and prior to this fix selecting an ABI did not enable FPU register sharing, which defaults off.\n\nIn a build that enables the FPU with the default ABI but leaves CONFIG_FPU_SHARING disabled, the kernel preserves no callee-saved FP register state across thread switches. The documented precondition for this \"unshared\" mode \u2014 that only a single thread ever executes FP instructions \u2014 is silently violated because the compiler may generate FP instructions in every thread.\n\nUnder CONFIG_USERSPACE, where threads are mutually isolated, this becomes an information-disclosure boundary crossing: a victim thread can leave secret-derived values in s16-s31, and a co-resident unprivileged thread can read those registers directly (FP register access is not privilege-gated), recovering data left behind by another thread. Without userspace the same defect causes cross-thread FP state corruption (a correctness fault). The leak is bounded to the 16 callee-saved single-precision registers and is opportunistic, so impact is low.\n\nThe fix makes FP_HARDABI and FP_SOFTABI select CONFIG_FPU_SHARING and tags every thread with K_FP_REGS at creation, so callee-saved FP state is always preserved across context switches whenever the compiler may emit FP instructions."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "baseScore": 3.6,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:L/I:L/A:N",
            "version": "3.1"
          },
          "format": "CVSS"
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-200",
              "description": "info-leak",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-08-31T23:13:18.528Z",
        "orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
        "shortName": "zephyr"
      },
      "references": [
        {
          "name": "Fix commit",
          "tags": [
            "patch"
          ],
          "url": "https://github.com/zephyrproject-rtos/zephyr/commit/3d405326a7653cba6860280e45c8734f8d3fc423"
        },
        {
          "name": "GHSA-qxr9-wh3c-hvgv",
          "url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-qxr9-wh3c-hvgv"
        }
      ],
      "title": "Cross-thread FPU register leak on ARM when FPU enabled without register sharing",
      "x_generator": {
        "engine": "cvelib 1.8.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
    "assignerShortName": "zephyr",
    "cveId": "CVE-2026-11985",
    "datePublished": "2026-08-11T04:56:59.359Z",
    "dateReserved": "2026-06-11T14:04:09.251Z",
    "dateUpdated": "2026-08-31T23:13:18.528Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2",
  "vulnerability-lookup:meta": {
    "epss": {
      "cve": "CVE-2026-11985",
      "date": "2026-10-25",
      "epss": "0.00125",
      "percentile": "0.02183"
    },
    "nvd": {
      "cve": {
        "affected": [
          {
            "affectedData": [
              {
                "collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
                "defaultStatus": "unaffected",
                "packageName": "zephyr",
                "product": "zephyr",
                "programFiles": [
                  "arch/Kconfig",
                  "arch/arm/core/Kconfig",
                  "arch/arm/core/cortex_a_r/thread.c",
                  "arch/arm/core/cortex_m/thread.c"
                ],
                "vendor": "zephyrproject",
                "versions": [
                  {
                    "lessThan": "4.4.2",
                    "status": "affected",
                    "version": "1.13.0",
                    "versionType": "semver"
                  }
                ]
              }
            ],
            "source": "vulnerabilities@zephyrproject.org"
          }
        ],
        "cveTags": [],
        "descriptions": [
          {
            "lang": "en",
            "value": "On the Zephyr ARM port, enabling the hardware FPU (CONFIG_FPU) forces the \"Floating point ABI\" choice, which defaults to CONFIG_FP_HARDABI. Both FP_HARDABI and FP_SOFTABI permit the compiler to emit hardware FP instructions in any function, even code that never uses floating-point types. However, the callee-saved FP registers (s16-s31 / d8-d15) are only saved and restored across a context switch when CONFIG_FPU_SHARING is enabled (arch/arm/core/cortex_m/swap_helper.S and arch/arm/core/cortex_a_r/swap_helper.S), and prior to this fix selecting an ABI did not enable FPU register sharing, which defaults off.\n\nIn a build that enables the FPU with the default ABI but leaves CONFIG_FPU_SHARING disabled, the kernel preserves no callee-saved FP register state across thread switches. The documented precondition for this \"unshared\" mode \u2014 that only a single thread ever executes FP instructions \u2014 is silently violated because the compiler may generate FP instructions in every thread.\n\nUnder CONFIG_USERSPACE, where threads are mutually isolated, this becomes an information-disclosure boundary crossing: a victim thread can leave secret-derived values in s16-s31, and a co-resident unprivileged thread can read those registers directly (FP register access is not privilege-gated), recovering data left behind by another thread. Without userspace the same defect causes cross-thread FP state corruption (a correctness fault). The leak is bounded to the 16 callee-saved single-precision registers and is opportunistic, so impact is low.\n\nThe fix makes FP_HARDABI and FP_SOFTABI select CONFIG_FPU_SHARING and tags every thread with K_FP_REGS at creation, so callee-saved FP state is always preserved across context switches whenever the compiler may emit FP instructions."
          },
          {
            "lang": "es",
            "value": "En el puerto ARM de Zephyr, habilitar la FPU de hardware (CONFIG_FPU) fuerza la elecci\u00f3n de \u2019Floating point ABI\u2019, que por defecto es CONFIG_FP_HARDABI. Tanto FP_HARDABI como FP_SOFTABI permiten al compilador emitir instrucciones FP de hardware en cualquier funci\u00f3n, incluso c\u00f3digo que nunca usa tipos de punto flotante. Sin embargo, los registros FP guardados por la funci\u00f3n llamada (s16-s31 / d8-d15) solo se guardan y restauran a trav\u00e9s de un cambio de contexto (context switch) cuando CONFIG_FPU_SHARING est\u00e1 habilitado (arch/arm/core/cortex_m/swap_helper.S y arch/arm/core/cortex_a_r/swap_helper.S), y antes de esta correcci\u00f3n, seleccionar una ABI no habilitaba el intercambio de registros FPU, que por defecto est\u00e1 desactivado.\n\nEn una compilaci\u00f3n que habilita la FPU con la ABI predeterminada pero deja CONFIG_FPU_SHARING deshabilitado, el kernel no conserva ning\u00fan estado de registro FP guardado por la funci\u00f3n llamada a trav\u00e9s de los cambios de hilo (thread switches). La condici\u00f3n previa documentada para este modo \u2019no compartido\u2019 - que solo un \u00fanico hilo ejecuta instrucciones FP - se viola silenciosamente porque el compilador puede generar instrucciones FP en cada hilo.\n\nBajo CONFIG_USERSPACE, donde los hilos est\u00e1n mutuamente aislados, esto se convierte en un cruce de l\u00edmite de divulgaci\u00f3n de informaci\u00f3n: un hilo v\u00edctima puede dejar valores derivados de secretos en s16-s31, y un hilo no privilegiado co-residente puede leer esos registros directamente (el acceso a los registros FP no est\u00e1 restringido por privilegios), recuperando datos dejados por otro hilo. Sin userspace, el mismo defecto causa corrupci\u00f3n del estado FP entre hilos (una falla de correcci\u00f3n). La fuga est\u00e1 limitada a los 16 registros de precisi\u00f3n simple guardados por la funci\u00f3n llamada y es oportunista, por lo tanto, el impacto es bajo.\n\nLa correcci\u00f3n hace que FP_HARDABI y FP_SOFTABI seleccionen CONFIG_FPU_SHARING y etiqueta cada hilo con K_FP_REGS en la creaci\u00f3n, de modo que el estado FP guardado por la funci\u00f3n llamada siempre se conserva a trav\u00e9s de los cambios de contexto siempre que el compilador pueda emitir instrucciones FP."
          }
        ],
        "id": "CVE-2026-11985",
        "lastModified": "2026-10-23T19:10:00.167",
        "metrics": {
          "cvssMetricV31": [
            {
              "cvssData": {
                "attackComplexity": "HIGH",
                "attackVector": "LOCAL",
                "availabilityImpact": "NONE",
                "baseScore": 3.6,
                "baseSeverity": "LOW",
                "confidentialityImpact": "LOW",
                "integrityImpact": "LOW",
                "privilegesRequired": "LOW",
                "scope": "UNCHANGED",
                "userInteraction": "NONE",
                "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:L/I:L/A:N",
                "version": "3.1"
              },
              "exploitabilityScore": 1.0,
              "impactScore": 2.5,
              "source": "vulnerabilities@zephyrproject.org",
              "type": "Secondary"
            }
          ],
          "ssvcV203": [
            {
              "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
              "ssvcData": {
                "id": "CVE-2026-11985",
                "options": [
                  {
                    "exploitation": "none"
                  },
                  {
                    "automatable": "no"
                  },
                  {
                    "technicalImpact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-08-11T17:55:04.091131Z",
                "version": "2.0.3"
              }
            }
          ]
        },
        "published": "2026-08-11T05:17:11.780",
        "references": [
          {
            "source": "vulnerabilities@zephyrproject.org",
            "url": "https://github.com/zephyrproject-rtos/zephyr/commit/3d405326a7653cba6860280e45c8734f8d3fc423"
          },
          {
            "source": "vulnerabilities@zephyrproject.org",
            "url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-qxr9-wh3c-hvgv"
          }
        ],
        "sourceIdentifier": "vulnerabilities@zephyrproject.org",
        "vulnStatus": "Awaiting Analysis",
        "weaknesses": [
          {
            "description": [
              {
                "lang": "en",
                "value": "CWE-200"
              }
            ],
            "source": "vulnerabilities@zephyrproject.org",
            "type": "Secondary"
          }
        ]
      }
    },
    "vulnrichment": {
      "containers": {
        "adp": [
          {
            "metrics": [
              {
                "other": {
                  "content": {
                    "id": "CVE-2026-11985",
                    "options": [
                      {
                        "Exploitation": "none"
                      },
                      {
                        "Automatable": "no"
                      },
                      {
                        "Technical Impact": "partial"
                      }
                    ],
                    "role": "CISA Coordinator",
                    "timestamp": "2026-08-11T17:55:04.091131Z",
                    "version": "2.0.3"
                  },
                  "type": "ssvc"
                }
              }
            ],
            "providerMetadata": {
              "dateUpdated": "2026-08-11T17:55:16.971Z",
              "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
              "shortName": "CISA-ADP"
            },
            "title": "CISA ADP Vulnrichment"
          }
        ],
        "cna": {
          "affected": [
            {
              "collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
              "defaultStatus": "unaffected",
              "packageName": "zephyr",
              "product": "zephyr",
              "programFiles": [
                "arch/Kconfig",
                "arch/arm/core/Kconfig",
                "arch/arm/core/cortex_a_r/thread.c",
                "arch/arm/core/cortex_m/thread.c"
              ],
              "vendor": "zephyrproject",
              "versions": [
                {
                  "lessThan": "4.4.2",
                  "status": "affected",
                  "version": "1.13.0",
                  "versionType": "semver"
                }
              ]
            }
          ],
          "descriptions": [
            {
              "lang": "en",
              "value": "On the Zephyr ARM port, enabling the hardware FPU (CONFIG_FPU) forces the \"Floating point ABI\" choice, which defaults to CONFIG_FP_HARDABI. Both FP_HARDABI and FP_SOFTABI permit the compiler to emit hardware FP instructions in any function, even code that never uses floating-point types. However, the callee-saved FP registers (s16-s31 / d8-d15) are only saved and restored across a context switch when CONFIG_FPU_SHARING is enabled (arch/arm/core/cortex_m/swap_helper.S and arch/arm/core/cortex_a_r/swap_helper.S), and prior to this fix selecting an ABI did not enable FPU register sharing, which defaults off.\n\nIn a build that enables the FPU with the default ABI but leaves CONFIG_FPU_SHARING disabled, the kernel preserves no callee-saved FP register state across thread switches. The documented precondition for this \"unshared\" mode \u2014 that only a single thread ever executes FP instructions \u2014 is silently violated because the compiler may generate FP instructions in every thread.\n\nUnder CONFIG_USERSPACE, where threads are mutually isolated, this becomes an information-disclosure boundary crossing: a victim thread can leave secret-derived values in s16-s31, and a co-resident unprivileged thread can read those registers directly (FP register access is not privilege-gated), recovering data left behind by another thread. Without userspace the same defect causes cross-thread FP state corruption (a correctness fault). The leak is bounded to the 16 callee-saved single-precision registers and is opportunistic, so impact is low.\n\nThe fix makes FP_HARDABI and FP_SOFTABI select CONFIG_FPU_SHARING and tags every thread with K_FP_REGS at creation, so callee-saved FP state is always preserved across context switches whenever the compiler may emit FP instructions."
            }
          ],
          "metrics": [
            {
              "cvssV3_1": {
                "baseScore": 3.6,
                "baseSeverity": "LOW",
                "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:L/I:L/A:N",
                "version": "3.1"
              },
              "format": "CVSS"
            }
          ],
          "problemTypes": [
            {
              "descriptions": [
                {
                  "cweId": "CWE-200",
                  "description": "info-leak",
                  "lang": "en",
                  "type": "CWE"
                }
              ]
            }
          ],
          "providerMetadata": {
            "dateUpdated": "2026-08-31T23:13:18.528Z",
            "orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
            "shortName": "zephyr"
          },
          "references": [
            {
              "name": "Fix commit",
              "tags": [
                "patch"
              ],
              "url": "https://github.com/zephyrproject-rtos/zephyr/commit/3d405326a7653cba6860280e45c8734f8d3fc423"
            },
            {
              "name": "GHSA-qxr9-wh3c-hvgv",
              "url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-qxr9-wh3c-hvgv"
            }
          ],
          "title": "Cross-thread FPU register leak on ARM when FPU enabled without register sharing",
          "x_generator": {
            "engine": "cvelib 1.8.0"
          }
        }
      },
      "cveMetadata": {
        "assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
        "assignerShortName": "zephyr",
        "cveId": "CVE-2026-11985",
        "datePublished": "2026-08-11T04:56:59.359Z",
        "dateReserved": "2026-06-11T14:04:09.251Z",
        "dateUpdated": "2026-08-31T23:13:18.528Z",
        "state": "PUBLISHED"
      },
      "dataType": "CVE_RECORD",
      "dataVersion": "5.2"
    }
  }
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline

Sightings and recorded dates, grouped by day · UTC

JSON
Events included in the timeline

Loading timeline…


    Loading…

    Loading…

    Loading…

    Related by attack behaviour

    Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.