CVE-2026-19185 (GCVE-0-2026-19185)
Vulnerability from cvelistv5 – Published: 2026-10-05 08:06 – Updated: 2026-10-05 14:06
VLAI
EPSS
VEX
Title
Unvalidated user-supplied buffer pointers in the I3C do_ccc system call handler allow kernel memory read/write from user mode
Summary
The system-call verifier for i3c_do_ccc() in drivers/i3c/i3c_handlers.c validated the outer struct i3c_ccc_payload, the broadcast ccc.data buffer and the targets.payloads[] array, but did not validate the per-target data buffers those array elements point at. Each struct i3c_ccc_target_payload carries its own data pointer and data_len, and neither was passed through K_SYSCALL_MEMORY() before the payload was handed to z_impl_i3c_do_ccc() and on to the controller driver. The verifier also operated on the caller's live structure rather than a snapshot, so validated fields could be changed by a second user thread between the check and the driver's use — unlike the sibling z_vrfy_i3c_transfer(), which has always copied its message array first.
The defect is only present in CONFIG_USERSPACE builds, where drivers/i3c/i3c_handlers.c is compiled. An unprivileged user-mode thread that has been granted access to the I3C controller device object — the ordinary way an application lets a user thread talk to I3C peripherals — can issue a direct CCC whose target payload data pointer names an arbitrary kernel address. Controller drivers dereference that pointer directly (for example drivers/i3c/i3c_mcux.c, drivers/i3c/i3c_cdns.c, drivers/i3c/i3c_stm32.c, drivers/i3c/i3c_npcx.c), using rnw to decide direction.
A read CCC therefore causes the kernel-mode driver to write bus-received bytes into an attacker-chosen kernel address for an attacker-chosen length, and a write CCC transmits kernel memory out onto the I3C bus. The result is an out-of-bounds kernel write plus a kernel memory disclosure, i.e. escalation from a user-mode thread to supervisor privilege, defeating the isolation CONFIG_USERSPACE is meant to provide.
The fix introduces copy_ccc_and_do(), which snapshots the payload, copies the target array into kernel memory with k_usermode_alloc_from_copy() (bounding num_targets to fewer than 32), validates each per-target buffer with K_SYSCALL_MEMORY() according to rnw, and copies the driver-written num_xfer and err fields back to the caller.
Severity
7.8 (High)
SSVC
Exploitation: none
Automatable: no
Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-10-05 14:06 UTC
CWE
- CWE-822 - memory-safety
Assigner
References
2 references
Impacted products
1 product
| Vendor | Product | Version | CPE status | |
|---|---|---|---|---|
| zephyrproject | zephyr |
Affected:
3.2.0 , < 4.5.0
(semver)
|
guessed |
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-19185",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-10-05T14:06:01.294641Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-10-05T14:06:55.566Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
"defaultStatus": "unaffected",
"packageName": "zephyr",
"product": "zephyr",
"programFiles": [
"drivers/i3c/i3c_handlers.c"
],
"programRoutines": [
{
"name": "z_vrfy_i3c_do_ccc"
}
],
"vendor": "zephyrproject",
"versions": [
{
"lessThan": "4.5.0",
"status": "affected",
"version": "3.2.0",
"versionType": "semver"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "The system-call verifier for i3c_do_ccc() in drivers/i3c/i3c_handlers.c validated the outer struct i3c_ccc_payload, the broadcast ccc.data buffer and the targets.payloads[] array, but did not validate the per-target data buffers those array elements point at. Each struct i3c_ccc_target_payload carries its own data pointer and data_len, and neither was passed through K_SYSCALL_MEMORY() before the payload was handed to z_impl_i3c_do_ccc() and on to the controller driver. The verifier also operated on the caller\u0027s live structure rather than a snapshot, so validated fields could be changed by a second user thread between the check and the driver\u0027s use \u2014 unlike the sibling z_vrfy_i3c_transfer(), which has always copied its message array first.\n\nThe defect is only present in CONFIG_USERSPACE builds, where drivers/i3c/i3c_handlers.c is compiled. An unprivileged user-mode thread that has been granted access to the I3C controller device object \u2014 the ordinary way an application lets a user thread talk to I3C peripherals \u2014 can issue a direct CCC whose target payload data pointer names an arbitrary kernel address. Controller drivers dereference that pointer directly (for example drivers/i3c/i3c_mcux.c, drivers/i3c/i3c_cdns.c, drivers/i3c/i3c_stm32.c, drivers/i3c/i3c_npcx.c), using rnw to decide direction.\n\nA read CCC therefore causes the kernel-mode driver to write bus-received bytes into an attacker-chosen kernel address for an attacker-chosen length, and a write CCC transmits kernel memory out onto the I3C bus. The result is an out-of-bounds kernel write plus a kernel memory disclosure, i.e. escalation from a user-mode thread to supervisor privilege, defeating the isolation CONFIG_USERSPACE is meant to provide.\n\nThe fix introduces copy_ccc_and_do(), which snapshots the payload, copies the target array into kernel memory with k_usermode_alloc_from_copy() (bounding num_targets to fewer than 32), validates each per-target buffer with K_SYSCALL_MEMORY() according to rnw, and copies the driver-written num_xfer and err fields back to the caller."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 7.8,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"format": "CVSS"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-822",
"description": "memory-safety",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-05T08:06:29.874Z",
"orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"shortName": "zephyr"
},
"references": [
{
"name": "Fix commit",
"tags": [
"patch"
],
"url": "https://github.com/zephyrproject-rtos/zephyr/commit/35562f22f40c6d2f31969a31f0a4902e5b067f27"
},
{
"name": "GHSA-pcrr-29j7-8w57",
"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-pcrr-29j7-8w57"
}
],
"title": "Unvalidated user-supplied buffer pointers in the I3C do_ccc system call handler allow kernel memory read/write from user mode",
"x_generator": {
"engine": "cvelib 1.8.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"assignerShortName": "zephyr",
"cveId": "CVE-2026-19185",
"datePublished": "2026-10-05T08:06:29.874Z",
"dateReserved": "2026-08-06T18:36:11.738Z",
"dateUpdated": "2026-10-05T14:06:55.566Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2",
"vulnerability-lookup:meta": {
"epss": {
"cve": "CVE-2026-19185",
"date": "2026-10-05",
"epss": "0.00114",
"percentile": "0.01347"
},
"nvd": {
"cve": {
"affected": [
{
"affectedData": [
{
"collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
"defaultStatus": "unaffected",
"packageName": "zephyr",
"product": "zephyr",
"programFiles": [
"drivers/i3c/i3c_handlers.c"
],
"programRoutines": [
{
"name": "z_vrfy_i3c_do_ccc"
}
],
"vendor": "zephyrproject",
"versions": [
{
"lessThan": "4.5.0",
"status": "affected",
"version": "3.2.0",
"versionType": "semver"
}
]
}
],
"source": "vulnerabilities@zephyrproject.org"
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "The system-call verifier for i3c_do_ccc() in drivers/i3c/i3c_handlers.c validated the outer struct i3c_ccc_payload, the broadcast ccc.data buffer and the targets.payloads[] array, but did not validate the per-target data buffers those array elements point at. Each struct i3c_ccc_target_payload carries its own data pointer and data_len, and neither was passed through K_SYSCALL_MEMORY() before the payload was handed to z_impl_i3c_do_ccc() and on to the controller driver. The verifier also operated on the caller\u0027s live structure rather than a snapshot, so validated fields could be changed by a second user thread between the check and the driver\u0027s use \u2014 unlike the sibling z_vrfy_i3c_transfer(), which has always copied its message array first.\n\nThe defect is only present in CONFIG_USERSPACE builds, where drivers/i3c/i3c_handlers.c is compiled. An unprivileged user-mode thread that has been granted access to the I3C controller device object \u2014 the ordinary way an application lets a user thread talk to I3C peripherals \u2014 can issue a direct CCC whose target payload data pointer names an arbitrary kernel address. Controller drivers dereference that pointer directly (for example drivers/i3c/i3c_mcux.c, drivers/i3c/i3c_cdns.c, drivers/i3c/i3c_stm32.c, drivers/i3c/i3c_npcx.c), using rnw to decide direction.\n\nA read CCC therefore causes the kernel-mode driver to write bus-received bytes into an attacker-chosen kernel address for an attacker-chosen length, and a write CCC transmits kernel memory out onto the I3C bus. The result is an out-of-bounds kernel write plus a kernel memory disclosure, i.e. escalation from a user-mode thread to supervisor privilege, defeating the isolation CONFIG_USERSPACE is meant to provide.\n\nThe fix introduces copy_ccc_and_do(), which snapshots the payload, copies the target array into kernel memory with k_usermode_alloc_from_copy() (bounding num_targets to fewer than 32), validates each per-target buffer with K_SYSCALL_MEMORY() according to rnw, and copies the driver-written num_xfer and err fields back to the caller."
}
],
"id": "CVE-2026-19185",
"lastModified": "2026-10-05T15:17:22.120",
"metrics": {
"cvssMetricV31": [
{
"cvssData": {
"attackComplexity": "LOW",
"attackVector": "LOCAL",
"availabilityImpact": "HIGH",
"baseScore": 7.8,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"exploitabilityScore": 1.8,
"impactScore": 5.9,
"source": "vulnerabilities@zephyrproject.org",
"type": "Secondary"
}
],
"ssvcV203": [
{
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"ssvcData": {
"id": "CVE-2026-19185",
"options": [
{
"exploitation": "none"
},
{
"automatable": "no"
},
{
"technicalImpact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-10-05T14:06:01.294641Z",
"version": "2.0.3"
}
}
]
},
"published": "2026-10-05T09:17:13.077",
"references": [
{
"source": "vulnerabilities@zephyrproject.org",
"url": "https://github.com/zephyrproject-rtos/zephyr/commit/35562f22f40c6d2f31969a31f0a4902e5b067f27"
},
{
"source": "vulnerabilities@zephyrproject.org",
"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-pcrr-29j7-8w57"
}
],
"sourceIdentifier": "vulnerabilities@zephyrproject.org",
"vulnStatus": "Received",
"weaknesses": [
{
"description": [
{
"lang": "en",
"value": "CWE-822"
}
],
"source": "vulnerabilities@zephyrproject.org",
"type": "Secondary"
}
]
}
},
"vulnrichment": {
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-19185",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-10-05T14:06:01.294641Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-10-05T14:06:12.208Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
"defaultStatus": "unaffected",
"packageName": "zephyr",
"product": "zephyr",
"programFiles": [
"drivers/i3c/i3c_handlers.c"
],
"programRoutines": [
{
"name": "z_vrfy_i3c_do_ccc"
}
],
"vendor": "zephyrproject",
"versions": [
{
"lessThan": "4.5.0",
"status": "affected",
"version": "3.2.0",
"versionType": "semver"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "The system-call verifier for i3c_do_ccc() in drivers/i3c/i3c_handlers.c validated the outer struct i3c_ccc_payload, the broadcast ccc.data buffer and the targets.payloads[] array, but did not validate the per-target data buffers those array elements point at. Each struct i3c_ccc_target_payload carries its own data pointer and data_len, and neither was passed through K_SYSCALL_MEMORY() before the payload was handed to z_impl_i3c_do_ccc() and on to the controller driver. The verifier also operated on the caller\u0027s live structure rather than a snapshot, so validated fields could be changed by a second user thread between the check and the driver\u0027s use \u2014 unlike the sibling z_vrfy_i3c_transfer(), which has always copied its message array first.\n\nThe defect is only present in CONFIG_USERSPACE builds, where drivers/i3c/i3c_handlers.c is compiled. An unprivileged user-mode thread that has been granted access to the I3C controller device object \u2014 the ordinary way an application lets a user thread talk to I3C peripherals \u2014 can issue a direct CCC whose target payload data pointer names an arbitrary kernel address. Controller drivers dereference that pointer directly (for example drivers/i3c/i3c_mcux.c, drivers/i3c/i3c_cdns.c, drivers/i3c/i3c_stm32.c, drivers/i3c/i3c_npcx.c), using rnw to decide direction.\n\nA read CCC therefore causes the kernel-mode driver to write bus-received bytes into an attacker-chosen kernel address for an attacker-chosen length, and a write CCC transmits kernel memory out onto the I3C bus. The result is an out-of-bounds kernel write plus a kernel memory disclosure, i.e. escalation from a user-mode thread to supervisor privilege, defeating the isolation CONFIG_USERSPACE is meant to provide.\n\nThe fix introduces copy_ccc_and_do(), which snapshots the payload, copies the target array into kernel memory with k_usermode_alloc_from_copy() (bounding num_targets to fewer than 32), validates each per-target buffer with K_SYSCALL_MEMORY() according to rnw, and copies the driver-written num_xfer and err fields back to the caller."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 7.8,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"format": "CVSS"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-822",
"description": "memory-safety",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-05T08:06:29.874Z",
"orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"shortName": "zephyr"
},
"references": [
{
"name": "Fix commit",
"tags": [
"patch"
],
"url": "https://github.com/zephyrproject-rtos/zephyr/commit/35562f22f40c6d2f31969a31f0a4902e5b067f27"
},
{
"name": "GHSA-pcrr-29j7-8w57",
"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-pcrr-29j7-8w57"
}
],
"title": "Unvalidated user-supplied buffer pointers in the I3C do_ccc system call handler allow kernel memory read/write from user mode",
"x_generator": {
"engine": "cvelib 1.8.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"assignerShortName": "zephyr",
"cveId": "CVE-2026-19185",
"datePublished": "2026-10-05T08:06:29.874Z",
"dateReserved": "2026-08-06T18:36:11.738Z",
"dateUpdated": "2026-10-05T14:06:55.566Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
}
}
Loading…
Loading…
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Loading…
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Loading…
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.
Loading…