SSA-935812

Vulnerability from csaf_siemens - Published: 2026-11-20 00:00 - Updated: 2026-11-20 00:00
Summary
SSA-935812: NGINX2Root Vulnerability in Industrial Edge
Notes
Summary: Siemens is currently assessing the impact of NGINX2Root (CVE-2026-123007, CVE-2026-123633, CVE-2026-123634, CVE-2026-121810, CVE-2026-113425) on Industrial Edge. Siemens is preparing fixes and recommends specific mitigations for products where fixes are not or not yet available.
General Recommendations: As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens' operational guidelines for Industrial Security (Download: https://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals. Additional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity
Additional Resources: For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories
Terms of Use: The use of Siemens Security Advisories is subject to the terms and conditions listed on: https://www.siemens.com/productcert/terms-of-use.

When NGINX Plus or NGINX Open Source is configured as a mail proxy, undisclosed traffic can cause a use-after-free in an nginx worker process. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR. Impact: A remote unauthenticated attacker may crash an nginx worker process or corrupt its memory, disrupting service. Remote code execution is a potential impact. There is no control plane exposure; this is a data plane issue only. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

CWE-416 - Use After Free
Affected products
Product Identifier Version Remediation
Industrial Edge Cloud Device (IECD)
Siemens / Industrial Edge Cloud Device (IECD)
vers:all/*
None Available
Industrial Edge Virtual Device (IEVD)
Siemens / Industrial Edge Virtual Device (IEVD)
vers:all/*
None Available
Industrial Edge Device Kit - arm64
Siemens / Industrial Edge Device Kit - arm64
vers:all/*
None Available
Industrial Edge Device Kit - x86-64
Siemens / Industrial Edge Device Kit - x86-64
vers:all/*
None Available
Industrial Edge Own Device (IEOD)
Siemens / Industrial Edge Own Device (IEOD)
vers:all/*
None Available
Product Identifier Version Remediation
Industrial Edge Hub
Siemens / Industrial Edge Hub
vers:all/*
Industrial Edge Management Cloud
Siemens / Industrial Edge Management Cloud
vers:all/*
Industrial Edge Management Pro V1
Siemens / Industrial Edge Management Pro V1
vers:all/*
Industrial Edge Management Pro V2
Siemens / Industrial Edge Management Pro V2
vers:all/*
Industrial Edge Management Virtual
Siemens / Industrial Edge Management Virtual
vers:all/*
Threats
Impact This product is not affected because HTTP/2 is disabled, and HTTP/3 and SSI are not used.

Description: This issue affects NGINX Plus and NGINX Open Source configurations that use HTTP/3. A remote, unauthenticated attacker can cause a use-after-free condition in the NGINX worker process, leading to a restart. Exploitation also depends on conditions beyond the attacker’s control. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR. Impact: This vulnerability may allow remote attackers to cause a denial-of-service (DoS) on the NGINX system or to possibly trigger a code execution. There is no control plane exposure; this is a data plane issue only. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

CWE-416 - Use After Free
Affected products
Known affected 5 products, the same list as for CVE-2026-113425
Known not affected 5 products, the same list as for CVE-2026-113425
Threats
Impact This product is not affected because HTTP/2 is disabled, and HTTP/3 and SSI are not used.

This issue affects NGINX Plus or NGINX Open Source configurations that use HTTP/2. When NGINX processes undisclosed traffic, the flow control window can exceed the allowed threshold, potentially resulting in a heap buffer overflow typically followed by an NGINX worker segmentation fault. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR. Impact: An attacker could leverage this vulnerability to crash the NGINX worker process, corrupt its memory, or potentially execute code remotely. There is no control plane exposure; this is a data plane issue only. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

CWE-191 - Integer Underflow (Wrap or Wraparound)
Affected products
Known affected 5 products, the same list as for CVE-2026-113425
Known not affected 5 products, the same list as for CVE-2026-113425
Threats
Impact This product is not affected because HTTP/2 is disabled, and HTTP/3 and SSI are not used.

When NGINX Plus or NGINX Open Source is configured to use HTTP/2 for client connections and proxy client requests to a backend, a specially crafted request can result in use-after-free in the worker process, if this process is running low on worker_connections. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR. Impact: This vulnerability may allow remote attackers to cause a denial-of-service (DoS) on the NGINX system or may allow a code execution. There is no control plane exposure; this is a data plane issue only. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

CWE-416 - Use After Free
Affected products
Known affected 5 products, the same list as for CVE-2026-113425
Known not affected 5 products, the same list as for CVE-2026-113425
Threats
Impact This product is not affected because HTTP/2 is disabled, and HTTP/3 and SSI are not used.

This issue occurs when NGINX Plus or NGINX Open Source is configured as a proxy, the proxied server name includes variables, and a Server Side Includes (SSI) or mirror directive sends a subrequest to a location that resolves the same server name. Under these conditions, a specially crafted HTTP request may cause a use-after-free condition in a worker process. An attacker may also be able to execute code if Address Space Layout Randomization (ASLR) is disabled or the attacker can bypass ASLR. Impact: An attacker could leverage this vulnerability to crash the NGINX worker process, corrupt its memory, or perform remote code execution (RCE) Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

CWE-416 - Use After Free
Affected products
Known affected 5 products, the same list as for CVE-2026-113425
Known not affected 5 products, the same list as for CVE-2026-113425
Threats
Impact This product is not affected because HTTP/2 is disabled, and HTTP/3 and SSI are not used.

{
  "document": {
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited. (TLPv2: TLP:CLEAR)",
      "tlp": {
        "label": "WHITE"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Siemens is currently assessing the impact of NGINX2Root (CVE-2026-123007, CVE-2026-123633, CVE-2026-123634, CVE-2026-121810, CVE-2026-113425) on Industrial Edge.\n\nSiemens is preparing fixes and recommends specific mitigations for products where fixes are not or not yet available.",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: https://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "The use of Siemens Security Advisories is subject to the terms and conditions listed on: https://www.siemens.com/productcert/terms-of-use.",
        "title": "Terms of Use"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "productcert@siemens.com",
      "name": "Siemens ProductCERT",
      "namespace": "https://www.siemens.com"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-935812: NGINX2Root Vulnerability in Industrial Edge - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-935812.html"
      },
      {
        "category": "self",
        "summary": "SSA-935812: NGINX2Root Vulnerability in Industrial Edge - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-935812.json"
      }
    ],
    "title": "SSA-935812: NGINX2Root Vulnerability in Industrial Edge",
    "tracking": {
      "current_release_date": "2026-11-20T00:00:00.000Z",
      "generator": {
        "engine": {
          "name": "Siemens ProductCERT CSAF Generator",
          "version": "1"
        }
      },
      "id": "SSA-935812",
      "initial_release_date": "2026-11-20T00:00:00.000Z",
      "revision_history": [
        {
          "date": "2026-11-20T00:00:00.000Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        }
      ],
      "status": "interim",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/*",
                "product": {
                  "name": "Industrial Edge Cloud Device (IECD)",
                  "product_id": "1"
                }
              }
            ],
            "category": "product_name",
            "name": "Industrial Edge Cloud Device (IECD)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/*",
                "product": {
                  "name": "Industrial Edge Device Kit - arm64",
                  "product_id": "2"
                }
              }
            ],
            "category": "product_name",
            "name": "Industrial Edge Device Kit - arm64"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/*",
                "product": {
                  "name": "Industrial Edge Device Kit\u00a0- x86-64",
                  "product_id": "3"
                }
              }
            ],
            "category": "product_name",
            "name": "Industrial Edge Device Kit\u00a0- x86-64"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/*",
                "product": {
                  "name": "Industrial Edge Hub",
                  "product_id": "4"
                }
              }
            ],
            "category": "product_name",
            "name": "Industrial Edge Hub"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/*",
                "product": {
                  "name": "Industrial Edge Management Cloud",
                  "product_id": "5"
                }
              }
            ],
            "category": "product_name",
            "name": "Industrial Edge Management Cloud"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/*",
                "product": {
                  "name": "Industrial Edge Management Pro V1",
                  "product_id": "6"
                }
              }
            ],
            "category": "product_name",
            "name": "Industrial Edge Management Pro V1"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/*",
                "product": {
                  "name": "Industrial Edge Management Pro V2",
                  "product_id": "7"
                }
              }
            ],
            "category": "product_name",
            "name": "Industrial Edge Management Pro V2"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/*",
                "product": {
                  "name": "Industrial Edge Management Virtual",
                  "product_id": "8"
                }
              }
            ],
            "category": "product_name",
            "name": "Industrial Edge Management Virtual"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/*",
                "product": {
                  "name": "Industrial Edge Own Device (IEOD)",
                  "product_id": "9"
                }
              }
            ],
            "category": "product_name",
            "name": "Industrial Edge Own Device (IEOD)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/*",
                "product": {
                  "name": "Industrial Edge Virtual Device (IEVD)",
                  "product_id": "10"
                }
              }
            ],
            "category": "product_name",
            "name": "Industrial Edge Virtual Device (IEVD)"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2026-113425",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "flags": [
        {
          "label": "vulnerable_code_not_in_execute_path",
          "product_ids": [
            "5",
            "4",
            "8",
            "7",
            "6"
          ]
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "When NGINX Plus or NGINX Open Source is configured as a mail proxy, undisclosed traffic can cause a use-after-free in an nginx worker process.\u00a0Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR.\n\nImpact:\nA remote unauthenticated attacker may crash an nginx worker process or corrupt its memory, disrupting service. Remote code execution is a potential impact. There is no control plane exposure; this is a data plane issue only.\n\n\n\nNote: Software versions which have reached End of Technical Support (EoTS) are not evaluated.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "10",
          "2",
          "3",
          "9"
        ],
        "known_not_affected": [
          "4",
          "5",
          "6",
          "7",
          "8"
        ]
      },
      "remediations": [
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "10",
            "2",
            "3",
            "9"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "10",
            "2",
            "3",
            "9"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "This product is not affected because HTTP/2 is disabled, and HTTP/3 and SSI are not used.",
          "product_ids": [
            "5",
            "4",
            "8",
            "7",
            "6"
          ]
        }
      ],
      "title": "CVE-2026-113425"
    },
    {
      "cve": "CVE-2026-121810",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "flags": [
        {
          "label": "vulnerable_code_not_in_execute_path",
          "product_ids": [
            "5",
            "4",
            "8",
            "7",
            "6"
          ]
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "Description:\nThis issue affects NGINX Plus and NGINX Open Source configurations that use HTTP/3. A remote, unauthenticated attacker can cause a use-after-free condition in the NGINX worker process, leading to a restart. Exploitation also depends on conditions beyond the attacker\u2019s control. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR.\n\nImpact:\nThis vulnerability may allow remote attackers to cause a denial-of-service (DoS) on the NGINX system or to possibly trigger a code execution. There is no control plane exposure; this is a data plane issue only.\n\n\n\nNote: Software versions which have reached End of Technical Support (EoTS) are not evaluated.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "10",
          "2",
          "3",
          "9"
        ],
        "known_not_affected": [
          "4",
          "5",
          "6",
          "7",
          "8"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "The following measure can be configured using a Web Application Firewall (WAF) or a reverse proxy: Disable HTTP/3/QUIC on affected services.",
          "product_ids": [
            "1",
            "10",
            "2",
            "3",
            "9"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "10",
            "2",
            "3",
            "9"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "10",
            "2",
            "3",
            "9"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "This product is not affected because HTTP/2 is disabled, and HTTP/3 and SSI are not used.",
          "product_ids": [
            "5",
            "4",
            "8",
            "7",
            "6"
          ]
        }
      ],
      "title": "CVE-2026-121810"
    },
    {
      "cve": "CVE-2026-123007",
      "cwe": {
        "id": "CWE-191",
        "name": "Integer Underflow (Wrap or Wraparound)"
      },
      "flags": [
        {
          "label": "vulnerable_code_not_in_execute_path",
          "product_ids": [
            "5",
            "4",
            "8",
            "7",
            "6"
          ]
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "This issue affects NGINX Plus or NGINX Open Source configurations that use HTTP/2. When NGINX processes undisclosed traffic, the flow control window can exceed the allowed threshold, potentially resulting in a heap buffer overflow typically followed by an NGINX worker segmentation fault. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR.\n\nImpact: An attacker could leverage this vulnerability to crash the NGINX worker process, corrupt its memory, or potentially execute code remotely. There is no control plane exposure; this is a data plane issue only.\n\n\n\nNote: Software versions which have reached End of Technical Support (EoTS) are not evaluated.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "10",
          "2",
          "3",
          "9"
        ],
        "known_not_affected": [
          "4",
          "5",
          "6",
          "7",
          "8"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "The following measure can be configured using a Web Application Firewall (WAF) or a reverse proxy: Disable HTTP/2 on affected listeners.",
          "product_ids": [
            "1",
            "10",
            "2",
            "3",
            "9"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "10",
            "2",
            "3",
            "9"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "10",
            "2",
            "3",
            "9"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "This product is not affected because HTTP/2 is disabled, and HTTP/3 and SSI are not used.",
          "product_ids": [
            "5",
            "4",
            "8",
            "7",
            "6"
          ]
        }
      ],
      "title": "CVE-2026-123007"
    },
    {
      "cve": "CVE-2026-123633",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "flags": [
        {
          "label": "vulnerable_code_not_in_execute_path",
          "product_ids": [
            "5",
            "4",
            "8",
            "7",
            "6"
          ]
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "When NGINX Plus or NGINX Open Source is configured to use HTTP/2 for client connections and proxy client requests to a backend, a specially crafted request can result in use-after-free in the worker process, if this process is running low on worker_connections.\u00a0Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR.\n\n\n\n\nImpact:\n\n\n\nThis vulnerability may allow remote attackers to cause a denial-of-service (DoS) on the NGINX system or may allow a code execution. There is no control plane exposure; this is a data plane issue only.\n\n\n\nNote: Software versions which have reached End of Technical Support (EoTS) are not evaluated.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "10",
          "2",
          "3",
          "9"
        ],
        "known_not_affected": [
          "4",
          "5",
          "6",
          "7",
          "8"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "The following measure can be configured using a Web Application Firewall (WAF) or a reverse proxy: Disable HTTP/2 on affected listeners.",
          "product_ids": [
            "1",
            "10",
            "2",
            "3",
            "9"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "10",
            "2",
            "3",
            "9"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "10",
            "2",
            "3",
            "9"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "This product is not affected because HTTP/2 is disabled, and HTTP/3 and SSI are not used.",
          "product_ids": [
            "5",
            "4",
            "8",
            "7",
            "6"
          ]
        }
      ],
      "title": "CVE-2026-123633"
    },
    {
      "cve": "CVE-2026-123634",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "flags": [
        {
          "label": "vulnerable_code_not_in_execute_path",
          "product_ids": [
            "5",
            "4",
            "8",
            "7",
            "6"
          ]
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "This issue occurs when NGINX Plus or NGINX Open Source is configured as a proxy, the proxied server name includes variables, and a Server Side Includes (SSI) or mirror directive sends a subrequest to a location that resolves the same server name. Under these conditions, a specially crafted HTTP request may cause a use-after-free condition in a worker process. An attacker may also be able to execute code if Address Space Layout Randomization (ASLR) is disabled or the attacker can bypass ASLR.\n\nImpact: \nAn attacker could leverage this vulnerability to crash the NGINX worker process, corrupt its memory, or perform remote code execution (RCE)\n\n\n\nNote: Software versions which have reached End of Technical Support (EoTS) are not evaluated.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "10",
          "2",
          "3",
          "9"
        ],
        "known_not_affected": [
          "4",
          "5",
          "6",
          "7",
          "8"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Avoid the use of SSI and mirror directives, and do not use variables when configuring the proxy server name.",
          "product_ids": [
            "1",
            "10",
            "2",
            "3",
            "9"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "10",
            "2",
            "3",
            "9"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "10",
            "2",
            "3",
            "9"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "This product is not affected because HTTP/2 is disabled, and HTTP/3 and SSI are not used.",
          "product_ids": [
            "5",
            "4",
            "8",
            "7",
            "6"
          ]
        }
      ],
      "title": "CVE-2026-123634"
    }
  ]
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline

Sightings and recorded dates, grouped by day · UTC

JSON
How durations are calculated

Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.

Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.

Events included in the timeline

Loading timeline…


    Loading…

    Loading…

    Loading…

    Related by attack behaviour

    Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.