cisco-sa-20190306-aci-file-read
Vulnerability from csaf_cisco
Published
2019-03-06 16:00
Modified
2019-03-06 16:00
Summary
Cisco Nexus 9000 Series Fabric Switches Application-Centric Infrastructure Mode Arbitrary File Read Vulnerability

Notes

Summary
A vulnerability in the Cisco Nexus 9000 Series Fabric Switches running in Application-Centric Infrastructure (ACI) mode could allow an authenticated, local attacker to read arbitrary files on an affected device. The vulnerability is due to a lack of proper input and validation checking mechanisms of user-supplied input sent to an affected device. A successful exploit could allow the attacker unauthorized access to read arbitrary files on an affected device. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link: https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20190306-aci-file-read ["https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20190306-aci-file-read"]
Vulnerable Products
This vulnerability affects Cisco Nexus 9000 Series Fabric Switches in ACI mode when they are running an affected release of Cisco NX-OS Software. For information about affected software releases, consult the Cisco bug ID(s) at the top of this advisory. Determining the Cisco NX-OS Software Release Administrators can determine the release of Cisco NX-OS Software running on a device by using the show version command in the device CLI. The following example identifies the 11.2(2) Release: nxos-n9k-aci# show version Cisco Nexus Operating System (NX-OS) Software such license is available at http://www.opensource.org/licenses/gpl-2.0.php and http://www.opensource.org/licenses/lgpl-2.1.php Software BIOS: version N/A kickstart: version 11.2(2) [build 11.2(1.184)] system: version 11.2(2) [build 11.2(1.184)] . . . Determining the Cisco Application Policy Infrastructure Controller Software Release There is a one-to-one mapping between the software for Cisco Application Policy Infrastructure Controller (APIC) and Cisco Nexus 9000 Series Fabric Switches in ACI mode. To determine which Cisco APIC Software release is running on a device, administrators can disregard the leftmost digit of the Cisco NX-OS Software version number. In the preceding example, the output shows Cisco NX-OS Software version 11.2(2), which maps to Cisco APIC Software Release 1.2(2).
Products Confirmed Not Vulnerable
Only products listed in the Vulnerable Products ["#vp"] section of this advisory are known to be affected by this vulnerability. Cisco has determined that this vulnerability does not affect the following Cisco products: Firepower 2100 Series Firepower 4100 Series Firepower 9300 Security Appliances MDS 9000 Series Multilayer Switches Nexus 1000V Switch for Microsoft Hyper-V Nexus 1000V Switch for VMware vSphere Nexus 2000 Series Fabric Extenders Nexus 3000 Series Switches Nexus 3500 Platform Switches Nexus 3600 Platform Switches Nexus 5000 Series Switches Nexus 5500 Platform Switches Nexus 5600 Platform Switches Nexus 7000 Series Switches Nexus 7700 Series Switches Nexus 9000 Series Switches in standalone NX-OS mode Nexus 9500 R-Series Switching Platform UCS 6200 Series Fabric Interconnects UCS 6300 Series Fabric Interconnects UCS 6400 Series Fabric Interconnects
Workarounds
There are no workarounds that address this vulnerability.
Fixed Software
For information about fixed software releases ["https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes"], consult the Cisco bug ID(s) at the top of this advisory. When considering software upgrades, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories and Alerts page ["https://www.cisco.com/go/psirt"], to determine exposure and a complete upgrade solution. In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers. Additional Resources For help determining the best Cisco NX-OS Software release for a Cisco Nexus Switch, administrators can refer to the following Recommended Releases documents. If a security advisory recommends a later release, Cisco recommends following the advisory guidance. Cisco MDS Series Switches ["https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/b_MDS_NX-OS_Recommended_Releases.html"] Cisco Nexus 1000V for VMware Switch ["http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/recommended_releases/b_Cisco_N1KV_VMware_MinRecommendedReleases.html"] Cisco Nexus 3000 Series and 3500 Series Switches ["http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/recommended_release/b_Minimum_and_Recommended_Cisco_NX-OS_Releases_for_Cisco_Nexus_3000_Series_Switches.html"] Cisco Nexus 5000 Series Switches ["http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/release/recommended_releases/recommended_nx-os_releases.html"] Cisco Nexus 5500 Platform Switches ["http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5500/sw/release/recommended_releases/n5500_recommended_nx-os_releases.html"] Cisco Nexus 6000 Series Switches ["http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus6000/sw/release/recommended_releases/recommended_nx-os_releases.html"] Cisco Nexus 7000 Series Switches ["http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/recommended_releases/recommended_nx-os_releases.html"] Cisco Nexus 9000 Series Switches ["http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/recommended_release/b_Minimum_and_Recommended_Cisco_NX-OS_Releases_for_Cisco_Nexus_9000_Series_Switches.html"] Cisco Nexus 9000 Series ACI-Mode Switches ["https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/recommended-release/b_Recommended_Cisco_ACI_Releases.html"] For help determining the best Cisco NX-OS Software release for Cisco UCS, refer to the Recommended Releases documents in the release notes for the device.
Vulnerability Policy
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy ["https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
Exploitation and Public Announcements
The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.
Source
Cisco would like to thank Nicolas Biscos and Gaëtan Ferry from Synacktiv for reporting this vulnerability.
Legal Disclaimer
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME. A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.



{
  "document": {
    "acknowledgments": [
      {
        "summary": "Cisco would like to thank Nicolas Biscos and Ga\u00ebtan Ferry from Synacktiv for reporting this vulnerability."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "notes": [
      {
        "category": "summary",
        "text": "A vulnerability in the Cisco Nexus 9000 Series Fabric Switches running in Application-Centric Infrastructure (ACI) mode could allow an authenticated, local attacker to read arbitrary files on an affected device.\r\n\r\nThe vulnerability is due to a lack of proper input and validation checking mechanisms of user-supplied input sent to an affected device. A successful exploit could allow the attacker unauthorized access to read arbitrary files on an affected device.\r\n\r\nCisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.\r\n\r\nThis advisory is available at the following link:\r\nhttps://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20190306-aci-file-read [\"https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20190306-aci-file-read\"]",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "This vulnerability affects Cisco Nexus 9000 Series Fabric Switches in ACI mode when they are running an affected release of Cisco NX-OS Software.\r\n\r\nFor information about affected software releases, consult the Cisco bug ID(s) at the top of this advisory.\r\n\r\nDetermining the Cisco NX-OS Software Release\r\nAdministrators can determine the release of Cisco NX-OS Software running on a device by using the show version command in the device CLI. The following example identifies the 11.2(2) Release:\r\n\r\n\r\nnxos-n9k-aci# show version\r\nCisco Nexus Operating System (NX-OS) Software  such license is available at  http://www.opensource.org/licenses/gpl-2.0.php and http://www.opensource.org/licenses/lgpl-2.1.php  Software  BIOS:      version N/A  kickstart: version 11.2(2) [build 11.2(1.184)]  system:    version 11.2(2) [build 11.2(1.184)]  .  .  .\r\n    Determining the Cisco Application Policy Infrastructure Controller Software Release\r\nThere is a one-to-one mapping between the software for Cisco Application Policy Infrastructure Controller (APIC) and Cisco Nexus 9000 Series Fabric Switches in ACI mode. To determine which Cisco APIC Software release is running on a device, administrators can disregard the leftmost digit of the Cisco NX-OS Software version number. In the preceding example, the output shows Cisco NX-OS Software version 11.2(2), which maps to Cisco APIC Software Release 1.2(2).",
        "title": "Vulnerable Products"
      },
      {
        "category": "general",
        "text": "Only products listed in the Vulnerable Products [\"#vp\"] section of this advisory are known to be affected by this vulnerability.\r\n\r\nCisco has determined that this vulnerability does not affect the following Cisco products:\r\n\r\nFirepower 2100 Series\r\nFirepower 4100 Series\r\nFirepower 9300 Security Appliances\r\nMDS 9000 Series Multilayer Switches\r\nNexus 1000V Switch for Microsoft Hyper-V\r\nNexus 1000V Switch for VMware vSphere\r\nNexus 2000 Series Fabric Extenders\r\nNexus 3000 Series Switches\r\nNexus 3500 Platform Switches\r\nNexus 3600 Platform Switches\r\nNexus 5000 Series Switches\r\nNexus 5500 Platform Switches\r\nNexus 5600 Platform Switches\r\nNexus 7000 Series Switches\r\nNexus 7700 Series Switches\r\nNexus 9000 Series Switches in standalone NX-OS mode\r\nNexus 9500 R-Series Switching Platform\r\nUCS 6200 Series Fabric Interconnects\r\nUCS 6300 Series Fabric Interconnects\r\nUCS 6400 Series Fabric Interconnects",
        "title": "Products Confirmed Not Vulnerable"
      },
      {
        "category": "general",
        "text": "There are no workarounds that address this vulnerability.",
        "title": "Workarounds"
      },
      {
        "category": "general",
        "text": "For information about fixed software releases [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes\"], consult the Cisco bug ID(s) at the top of this advisory.\r\n\r\nWhen considering software upgrades, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories and Alerts page [\"https://www.cisco.com/go/psirt\"], to determine exposure and a complete upgrade solution.\r\n\r\nIn all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.\r\n  Additional Resources\r\nFor help determining the best Cisco NX-OS Software release for a Cisco Nexus Switch, administrators can refer to the following Recommended Releases documents. If a security advisory recommends a later release, Cisco recommends following the advisory guidance.\r\n\r\n\r\nCisco MDS Series Switches [\"https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/b_MDS_NX-OS_Recommended_Releases.html\"]\r\nCisco Nexus 1000V for VMware Switch [\"http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/recommended_releases/b_Cisco_N1KV_VMware_MinRecommendedReleases.html\"]\r\nCisco Nexus 3000 Series and 3500 Series Switches [\"http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/recommended_release/b_Minimum_and_Recommended_Cisco_NX-OS_Releases_for_Cisco_Nexus_3000_Series_Switches.html\"]\r\nCisco Nexus 5000 Series Switches [\"http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/release/recommended_releases/recommended_nx-os_releases.html\"]\r\nCisco Nexus 5500 Platform Switches [\"http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5500/sw/release/recommended_releases/n5500_recommended_nx-os_releases.html\"]\r\nCisco Nexus 6000 Series Switches [\"http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus6000/sw/release/recommended_releases/recommended_nx-os_releases.html\"]\r\nCisco Nexus 7000 Series Switches [\"http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/recommended_releases/recommended_nx-os_releases.html\"]\r\nCisco Nexus 9000 Series Switches [\"http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/recommended_release/b_Minimum_and_Recommended_Cisco_NX-OS_Releases_for_Cisco_Nexus_9000_Series_Switches.html\"]\r\nCisco Nexus 9000 Series ACI-Mode Switches [\"https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/recommended-release/b_Recommended_Cisco_ACI_Releases.html\"]\r\n  For help determining the best Cisco NX-OS Software release for Cisco UCS, refer to the Recommended Releases documents in the release notes for the device.",
        "title": "Fixed Software"
      },
      {
        "category": "general",
        "text": "To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html\"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.",
        "title": "Vulnerability Policy"
      },
      {
        "category": "general",
        "text": "The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.",
        "title": "Exploitation and Public Announcements"
      },
      {
        "category": "general",
        "text": "Cisco would like to thank Nicolas Biscos and Ga\u00ebtan Ferry from Synacktiv for reporting this vulnerability.",
        "title": "Source"
      },
      {
        "category": "legal_disclaimer",
        "text": "THIS DOCUMENT IS PROVIDED ON AN \"AS IS\" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.\r\n\r\nA standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.",
        "title": "Legal Disclaimer"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "Emergency Support:\r\n+1 877 228 7302 (toll-free within North America)\r\n+1 408 525 6532 (International direct-dial)\r\nNon-emergency Support:\r\nEmail: psirt@cisco.com\r\nSupport requests that are received via e-mail are typically acknowledged within 48 hours.",
      "issuing_authority": "Cisco product security incident response is the responsibility of the Cisco Product Security Incident Response Team (PSIRT). The Cisco PSIRT is a dedicated, global team that manages the receipt, investigation, and public reporting of security vulnerability information that is related to Cisco products and networks. The on-call Cisco PSIRT works 24x7 with Cisco customers, independent security researchers, consultants, industry organizations, and other vendors to identify possible security issues with Cisco products and networks.\r\nMore information can be found in Cisco Security Vulnerability Policy available at https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html",
      "name": "Cisco",
      "namespace": "https://wwww.cisco.com"
    },
    "references": [
      {
        "category": "self",
        "summary": "Cisco Nexus 9000 Series Fabric\u00a0Switches Application-Centric Infrastructure Mode Arbitrary File Read Vulnerability",
        "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20190306-aci-file-read"
      },
      {
        "category": "external",
        "summary": "Cisco Security Vulnerability Policy",
        "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html"
      },
      {
        "category": "external",
        "summary": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20190306-aci-file-read",
        "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20190306-aci-file-read"
      },
      {
        "category": "external",
        "summary": "fixed software releases",
        "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes"
      },
      {
        "category": "external",
        "summary": "Cisco Security Advisories and Alerts page",
        "url": "https://www.cisco.com/go/psirt"
      },
      {
        "category": "external",
        "summary": "Cisco MDS Series Switches",
        "url": "https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/b_MDS_NX-OS_Recommended_Releases.html"
      },
      {
        "category": "external",
        "summary": "Cisco Nexus 1000V for VMware Switch",
        "url": "http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/recommended_releases/b_Cisco_N1KV_VMware_MinRecommendedReleases.html"
      },
      {
        "category": "external",
        "summary": "Cisco Nexus 3000 Series and 3500 Series Switches",
        "url": "http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/recommended_release/b_Minimum_and_Recommended_Cisco_NX-OS_Releases_for_Cisco_Nexus_3000_Series_Switches.html"
      },
      {
        "category": "external",
        "summary": "Cisco Nexus 5000 Series Switches",
        "url": "http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/release/recommended_releases/recommended_nx-os_releases.html"
      },
      {
        "category": "external",
        "summary": "Cisco Nexus 5500 Platform Switches",
        "url": "http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5500/sw/release/recommended_releases/n5500_recommended_nx-os_releases.html"
      },
      {
        "category": "external",
        "summary": "Cisco Nexus 6000 Series Switches",
        "url": "http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus6000/sw/release/recommended_releases/recommended_nx-os_releases.html"
      },
      {
        "category": "external",
        "summary": "Cisco Nexus 7000 Series Switches",
        "url": "http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/recommended_releases/recommended_nx-os_releases.html"
      },
      {
        "category": "external",
        "summary": "Cisco Nexus 9000 Series Switches",
        "url": "http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/recommended_release/b_Minimum_and_Recommended_Cisco_NX-OS_Releases_for_Cisco_Nexus_9000_Series_Switches.html"
      },
      {
        "category": "external",
        "summary": "Cisco Nexus 9000 Series ACI-Mode Switches",
        "url": "https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/recommended-release/b_Recommended_Cisco_ACI_Releases.html"
      },
      {
        "category": "external",
        "summary": "Security Vulnerability Policy",
        "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html"
      }
    ],
    "title": "Cisco Nexus 9000 Series Fabric\u00a0Switches Application-Centric Infrastructure Mode Arbitrary File Read Vulnerability",
    "tracking": {
      "current_release_date": "2019-03-06T16:00:00+00:00",
      "generator": {
        "date": "2022-09-03T03:39:20+00:00",
        "engine": {
          "name": "TVCE"
        }
      },
      "id": "cisco-sa-20190306-aci-file-read",
      "initial_release_date": "2019-03-06T16:00:00+00:00",
      "revision_history": [
        {
          "date": "2019-03-06T15:36:52+00:00",
          "number": "1.0.0",
          "summary": "Initial public release."
        }
      ],
      "status": "final",
      "version": "1.0.0"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "category": "product_family",
            "name": "Cisco NX-OS System Software in ACI Mode",
            "product": {
              "name": "Cisco NX-OS System Software in ACI Mode ",
              "product_id": "CSAFPID-241202"
            }
          }
        ],
        "category": "vendor",
        "name": "Cisco"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2019-1588",
      "ids": [
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCvm52064"
        }
      ],
      "notes": [
        {
          "category": "other",
          "text": "Complete.",
          "title": "Affected Product Comprehensiveness"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-241202"
        ]
      },
      "release_date": "2019-03-06T16:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Cisco has released software updates that address this vulnerability.",
          "product_ids": [
            "CSAFPID-241202"
          ],
          "url": "https://software.cisco.com"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.0/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.0"
          },
          "products": [
            "CSAFPID-241202"
          ]
        }
      ],
      "title": "cisco-sa-20190306-aci-file-read"
    }
  ]
}


Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Sightings

Author Source Type Date

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
  • Confirmed: The vulnerability is confirmed from an analyst perspective.
  • Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
  • Patched: This vulnerability was successfully patched by the user reporting the sighting.
  • Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
  • Not confirmed: The user expresses doubt about the veracity of the vulnerability.
  • Not patched: This vulnerability was not successfully patched by the user reporting the sighting.