cisco-sa-aironet-info-disc-bfwqghj
Vulnerability from csaf_cisco
Published
2021-03-24 16:00
Modified
2021-03-24 16:00
Summary
Cisco Aironet Access Points FlexConnect Upgrade Information Disclosure Vulnerability

Notes

Summary
A vulnerability in the FlexConnect Upgrade feature of Cisco Aironet Series Access Points Software could allow an unauthenticated, remote attacker to obtain confidential information from an affected device. This vulnerability is due to an unrestricted Trivial File Transfer Protocol (TFTP) configuration. An attacker could exploit this vulnerability by sending a specific TFTP request to an affected device. A successful exploit could allow the attacker to download any file from the filesystem of the affected access point (AP). Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link: https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-aironet-info-disc-BfWqghj ["https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-aironet-info-disc-BfWqghj"]
Vulnerable Products
This vulnerability affects the following Cisco products if they are running a vulnerable release of Cisco Aironet Series Access Points Software and are acting as the FlexConnect AP Upgrade Master: Aironet 1540 Series APs Aironet 1560 Series APs Aironet 1800 Series APs Aironet 2800 Series APs Aironet 3800 Series APs Aironet 4800 APs Catalyst 9100 APs Catalyst IW 6300 APs Integrated AP on 1100 Integrated Services Routers 6300 Series Embedded Services APs (ESW6300) For information about which Cisco software releases are vulnerable, see the Fixed Software ["#fs"] section of this advisory. Determine the Device Configuration To determine whether a device is acting as the FlexConnect AP Upgrade Master, complete the following steps: Log in to the Wireless LAN Controller management web interface. Choose Wireless > FlexConnect Groups. Click a Group Name to access the group configuration. Click Image Upgrade. Verify the status of the FlexConnect AP Upgrade check box: If checked: Check which AP is configured as master from the AP Name list. If not checked: The FlexConnect AP Upgrade is not being used and the devices are not affected by this vulnerability.
Products Confirmed Not Vulnerable
Only products listed in the Vulnerable Products ["#vp"] section of this advisory are known to be affected by this vulnerability. Cisco has confirmed that this vulnerability does not affect any Cisco Access Point series that is not listed in the Vulnerable Products ["#vp"] section of this advisory.
Workarounds
There are no workarounds that address this vulnerability. However, customers can disable the FlexConnect AP Upgrade feature as a mitigation. While this will make the image transfer less efficient, it will prevent exploitation of this vulnerability. While this mitigation has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Fixed Software
Cisco has released free software updates that address the vulnerability described in this advisory. Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license: https://www.cisco.com/c/en/us/products/end-user-license-agreement.html ["https://www.cisco.com/c/en/us/products/end-user-license-agreement.html"] Additionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades. When considering software upgrades ["https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes"], customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page ["https://www.cisco.com/go/psirt"], to determine exposure and a complete upgrade solution. In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers. Customers Without Service Contracts Customers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC: https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html ["https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html"] Customers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade. Fixed Releases The process to upgrade the APs requires administrators to upgrade the wireless controller that the APs are registered to. Customers are advised to upgrade to an appropriate fixed software release as indicated in the following table(s). To ensure a complete upgrade solution, consider that this advisory is part of a collection that includes the following advisories: cisco-sa-aironet-info-disc-BfWqghj ["https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-aironet-info-disc-BfWqghj"]: Cisco Aironet Access Points FlexConnect Upgrade Information Disclosure Vulnerability cisco-sa-aironet-mdns-dos-E6KwYuMx ["https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-aironet-mdns-dos-E6KwYuMx"]: Cisco Aironet Access Points FlexConnect Multicast DNS Denial of Service Vulnerability cisco-sa-ap-privesc-wEVfp8Ud ["https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ap-privesc-wEVfp8Ud"]: Cisco Access Point Software Arbitrary Code Execution Vulnerability Cisco Access Points Managed by Wireless LAN Controller or Mobility Express Cisco Wireless LAN Controller Software Release First Fixed Release for This Vulnerability First Fixed Release for All Vulnerabilities Described in This Collection of Advisories Earlier than 8.10.112.0 Not vulnerable. 8.10.151.0 8.10.112.0 and later 8.10.142.0 8.10.151.0 Cisco Access Points Managed by Catalyst 9800 Wireless Controller or Embedded Wireless Controller on Catalyst Access Points (EWC) Cisco Catalyst 9800 Wireless Controller Software Release First Fixed Release for This Vulnerability First Fixed Release for All Vulnerabilities Described in This Collection of Advisories Earlier than 17.1 Not vulnerable. 17.3.3 17.1 Migrate to a fixed release. 17.3.3 17.2 Migrate to a fixed release. 17.3.3 17.3 Migrate to a fixed release. 17.3.3 17.4 and later Not vulnerable. 17.5.1 (Mar 2021)
Vulnerability Policy
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy ["https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
Exploitation and Public Announcements
The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.
Source
This vulnerability was found during internal security testing.
Legal Disclaimer
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME. A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.



{
  "document": {
    "acknowledgments": [
      {
        "summary": "This vulnerability was found during internal security testing."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "notes": [
      {
        "category": "summary",
        "text": "A vulnerability in the FlexConnect Upgrade feature of Cisco Aironet Series Access Points Software could allow an unauthenticated, remote attacker to obtain confidential information from an affected device.\r\n\r\nThis vulnerability is due to an unrestricted Trivial File Transfer Protocol (TFTP) configuration. An attacker could exploit this vulnerability by sending a specific TFTP request to an affected device. A successful exploit could allow the attacker to download any file from the filesystem of the affected access point (AP).\r\n\r\nCisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.\r\n\r\nThis advisory is available at the following link:\r\nhttps://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-aironet-info-disc-BfWqghj [\"https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-aironet-info-disc-BfWqghj\"]",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "This vulnerability affects the following Cisco products if they are running a vulnerable release of Cisco Aironet Series Access Points Software and are acting as the FlexConnect AP Upgrade Master:\r\n\r\nAironet 1540 Series APs\r\nAironet 1560 Series APs\r\nAironet 1800 Series APs\r\nAironet 2800 Series APs\r\nAironet 3800 Series APs\r\nAironet 4800 APs\r\nCatalyst 9100 APs\r\nCatalyst IW 6300 APs\r\nIntegrated AP on 1100 Integrated Services Routers\r\n6300 Series Embedded Services APs (ESW6300)\r\n\r\nFor information about which Cisco software releases are vulnerable, see the Fixed Software [\"#fs\"] section of this advisory.\r\n Determine the Device Configuration\r\nTo determine whether a device is acting as the FlexConnect AP Upgrade Master, complete the following steps:\r\n\r\nLog in to the Wireless LAN Controller management web interface.\r\nChoose Wireless \u003e FlexConnect Groups.\r\nClick a Group Name to access the group configuration.\r\nClick Image Upgrade.\r\nVerify the status of the FlexConnect AP Upgrade check box:\r\nIf checked: Check which AP is configured as master from the AP Name list.\r\nIf not checked: The FlexConnect AP Upgrade is not being used and the devices are not affected by this vulnerability.",
        "title": "Vulnerable Products"
      },
      {
        "category": "general",
        "text": "Only products listed in the Vulnerable Products [\"#vp\"] section of this advisory are known to be affected by this vulnerability.\r\n\r\nCisco has confirmed that this vulnerability does not affect any Cisco Access Point series that is not listed in the Vulnerable Products [\"#vp\"] section of this advisory.",
        "title": "Products Confirmed Not Vulnerable"
      },
      {
        "category": "general",
        "text": "There are no workarounds that address this vulnerability.\r\n\r\nHowever, customers can disable the FlexConnect AP Upgrade feature as a mitigation. While this will make the image transfer less efficient, it will prevent exploitation of this vulnerability.\r\n\r\nWhile this mitigation has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.",
        "title": "Workarounds"
      },
      {
        "category": "general",
        "text": "Cisco has released free software updates that address the vulnerability described in this advisory. Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license:\r\nhttps://www.cisco.com/c/en/us/products/end-user-license-agreement.html [\"https://www.cisco.com/c/en/us/products/end-user-license-agreement.html\"]\r\n\r\nAdditionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.\r\n\r\nWhen considering software upgrades [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes\"], customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page [\"https://www.cisco.com/go/psirt\"], to determine exposure and a complete upgrade solution.\r\n\r\nIn all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.\r\n  Customers Without Service Contracts\r\nCustomers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC: https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html [\"https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html\"]\r\n\r\nCustomers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.\r\n      Fixed Releases\r\nThe process to upgrade the APs requires administrators to upgrade the wireless controller that the APs are registered to.\r\n\r\nCustomers are advised to upgrade to an appropriate fixed software release as indicated in the following table(s). To ensure a complete upgrade solution, consider that this advisory is part of a collection that includes the following advisories:\r\n\r\ncisco-sa-aironet-info-disc-BfWqghj [\"https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-aironet-info-disc-BfWqghj\"]: Cisco Aironet Access Points FlexConnect Upgrade Information Disclosure Vulnerability\r\ncisco-sa-aironet-mdns-dos-E6KwYuMx [\"https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-aironet-mdns-dos-E6KwYuMx\"]: Cisco Aironet Access Points FlexConnect Multicast DNS Denial of Service Vulnerability\r\ncisco-sa-ap-privesc-wEVfp8Ud [\"https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ap-privesc-wEVfp8Ud\"]: Cisco Access Point Software Arbitrary Code Execution Vulnerability\r\n\r\nCisco Access Points Managed by Wireless LAN Controller or Mobility Express\r\n        Cisco Wireless LAN Controller Software Release  First Fixed Release for This Vulnerability  First Fixed Release for All Vulnerabilities Described in This Collection of Advisories          Earlier than 8.10.112.0  Not vulnerable.  8.10.151.0      8.10.112.0 and later  8.10.142.0  8.10.151.0\r\nCisco Access Points Managed by Catalyst 9800 Wireless Controller or Embedded Wireless Controller on Catalyst Access Points (EWC)\r\n        Cisco Catalyst 9800 Wireless Controller Software Release  First Fixed Release for This Vulnerability  First Fixed Release for All Vulnerabilities Described in This Collection of Advisories          Earlier than 17.1  Not vulnerable.  17.3.3      17.1  Migrate to a fixed release.  17.3.3      17.2  Migrate to a fixed release.  17.3.3      17.3  Migrate to a fixed release.  17.3.3      17.4 and later  Not vulnerable.  17.5.1 (Mar 2021)",
        "title": "Fixed Software"
      },
      {
        "category": "general",
        "text": "To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html\"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.",
        "title": "Vulnerability Policy"
      },
      {
        "category": "general",
        "text": "The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.",
        "title": "Exploitation and Public Announcements"
      },
      {
        "category": "general",
        "text": "This vulnerability was found during internal security testing.",
        "title": "Source"
      },
      {
        "category": "legal_disclaimer",
        "text": "THIS DOCUMENT IS PROVIDED ON AN \"AS IS\" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.\r\n\r\nA standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.",
        "title": "Legal Disclaimer"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "Emergency Support:\r\n+1 877 228 7302 (toll-free within North America)\r\n+1 408 525 6532 (International direct-dial)\r\nNon-emergency Support:\r\nEmail: psirt@cisco.com\r\nSupport requests that are received via e-mail are typically acknowledged within 48 hours.",
      "issuing_authority": "Cisco product security incident response is the responsibility of the Cisco Product Security Incident Response Team (PSIRT). The Cisco PSIRT is a dedicated, global team that manages the receipt, investigation, and public reporting of security vulnerability information that is related to Cisco products and networks. The on-call Cisco PSIRT works 24x7 with Cisco customers, independent security researchers, consultants, industry organizations, and other vendors to identify possible security issues with Cisco products and networks.\r\nMore information can be found in Cisco Security Vulnerability Policy available at https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html",
      "name": "Cisco",
      "namespace": "https://wwww.cisco.com"
    },
    "references": [
      {
        "category": "self",
        "summary": "Cisco Aironet Access Points FlexConnect Upgrade Information Disclosure Vulnerability",
        "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-aironet-info-disc-BfWqghj"
      },
      {
        "category": "external",
        "summary": "Cisco Security Vulnerability Policy",
        "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html"
      },
      {
        "category": "external",
        "summary": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-aironet-info-disc-BfWqghj",
        "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-aironet-info-disc-BfWqghj"
      },
      {
        "category": "external",
        "summary": "https://www.cisco.com/c/en/us/products/end-user-license-agreement.html",
        "url": "https://www.cisco.com/c/en/us/products/end-user-license-agreement.html"
      },
      {
        "category": "external",
        "summary": "considering software upgrades",
        "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes"
      },
      {
        "category": "external",
        "summary": "Cisco\u0026nbsp;Security Advisories page",
        "url": "https://www.cisco.com/go/psirt"
      },
      {
        "category": "external",
        "summary": "https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html",
        "url": "https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html"
      },
      {
        "category": "external",
        "summary": "cisco-sa-aironet-info-disc-BfWqghj",
        "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-aironet-info-disc-BfWqghj"
      },
      {
        "category": "external",
        "summary": "cisco-sa-aironet-mdns-dos-E6KwYuMx",
        "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-aironet-mdns-dos-E6KwYuMx"
      },
      {
        "category": "external",
        "summary": "cisco-sa-ap-privesc-wEVfp8Ud",
        "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ap-privesc-wEVfp8Ud"
      },
      {
        "category": "external",
        "summary": "Security Vulnerability Policy",
        "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html"
      }
    ],
    "title": "Cisco Aironet Access Points FlexConnect Upgrade Information Disclosure Vulnerability",
    "tracking": {
      "current_release_date": "2021-03-24T16:00:00+00:00",
      "generator": {
        "date": "2022-10-22T03:09:53+00:00",
        "engine": {
          "name": "TVCE"
        }
      },
      "id": "cisco-sa-aironet-info-disc-BfWqghj",
      "initial_release_date": "2021-03-24T16:00:00+00:00",
      "revision_history": [
        {
          "date": "2021-03-12T15:46:28+00:00",
          "number": "1.0.0",
          "summary": "Initial public release."
        }
      ],
      "status": "final",
      "version": "1.0.0"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "category": "product_family",
            "name": "Cisco Aironet Access Point Software",
            "product": {
              "name": "Cisco Aironet Access Point Software ",
              "product_id": "CSAFPID-190024"
            }
          },
          {
            "category": "product_family",
            "name": "Cisco Aironet Access Point Software (IOS XE Controller)",
            "product": {
              "name": "Cisco Aironet Access Point Software (IOS XE Controller) ",
              "product_id": "CSAFPID-280019"
            }
          }
        ],
        "category": "vendor",
        "name": "Cisco"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2021-1437",
      "ids": [
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCvv91666"
        }
      ],
      "notes": [
        {
          "category": "other",
          "text": "Complete.",
          "title": "Affected Product Comprehensiveness"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-280019",
          "CSAFPID-190024"
        ]
      },
      "release_date": "2021-03-24T16:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Cisco has released software updates that address this vulnerability.",
          "product_ids": [
            "CSAFPID-190024",
            "CSAFPID-280019"
          ],
          "url": "https://software.cisco.com"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-280019",
            "CSAFPID-190024"
          ]
        }
      ],
      "title": "Cisco Aironet Access Points FlexConnect Upgrade Information Disclosure Vulnerability"
    }
  ]
}


Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading...

Loading...

Loading...

Sightings

Author Source Type Date

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
  • Confirmed: The vulnerability is confirmed from an analyst perspective.
  • Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
  • Patched: This vulnerability was successfully patched by the user reporting the sighting.
  • Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
  • Not confirmed: The user expresses doubt about the veracity of the vulnerability.
  • Not patched: This vulnerability was not successfully patched by the user reporting the sighting.