cisco-sa-cisco-sb-rv-overflow-htpymmb5
Vulnerability from csaf_cisco
Published
2021-08-18 16:00
Modified
2021-08-18 16:00
Summary
Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers Remote Command Execution and Denial of Service Vulnerability
Notes
Summary
A vulnerability in the Universal Plug-and-Play (UPnP) service of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper validation of incoming UPnP traffic. An attacker could exploit this vulnerability by sending a crafted UPnP request to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a DoS condition.
Cisco has not released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
This advisory is available at the following link:
https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-cisco-sb-rv-overflow-htpymMB5 ["https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-cisco-sb-rv-overflow-htpymMB5"]
Vulnerable Products
This vulnerability affects the following Cisco Small Business RV Series Routers if they have UPnP configured:
RV110W Wireless-N VPN Firewalls
RV130 VPN Routers
RV130W Wireless-N Multifunction VPN Routers
RV215W Wireless-N VPN Routers
Note: The UPnP service is enabled by default on LAN interfaces and disabled by default on WAN interfaces. If UPnP is disabled on both the LAN and WAN interfaces, the device is not considered vulnerable.
Determine the UPnP Configuration
To determine whether the UPnP feature is enabled on the LAN interface of a device, open the web-based management interface and navigate to Basic Settings > UPnP. If the Disable check box is unchecked, UPnP is enabled on the device.
Products Confirmed Not Vulnerable
Only products listed in the Vulnerable Products ["#vp"] section of this advisory are known to be affected by this vulnerability.
Workarounds
There are no workarounds that address this vulnerability. However, administrators may disable the affected feature.
To disable UPnP on the LAN interface of a device, do the following:
Open the web-based management interface and choose Basic Settings > UPnP.
Check the Disable check box.
While this mitigation has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Fixed Software
Cisco has not released and will not release software updates to address the vulnerability described in this advisory. The Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers have entered the end-of-life process. Customers are advised to refer to the end-of-life notices for these products:
End-of-Sale and End-of-Life Announcement for the Cisco Small Business RV Series Routers (selected models) ["https://www.cisco.com/c/en/us/products/collateral/routers/small-business-rv-series-routers/eos-eol-notice-c51-742771.pdf"]
Customers are encouraged to migrate to the Cisco Small Business RV132W, RV160, or RV160W Routers.
When considering a device migration, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page ["https://www.cisco.com/go/psirt"], to determine exposure and a complete upgrade solution.
In all cases, customers should ensure that new devices will be sufficient for their network needs; the new devices contain sufficient memory, and current hardware and software configurations will continue to be supported properly by the new product. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.
Vulnerability Policy
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy ["https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
Exploitation and Public Announcements
The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.
Source
Cisco would like to thank Quentin Kaiser of IoT Inspector Research Lab for reporting this vulnerability.
Legal Disclaimer
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.
{ "document": { "acknowledgments": [ { "summary": "Cisco would like to thank Quentin Kaiser of IoT Inspector Research Lab for reporting this vulnerability." } ], "category": "csaf_security_advisory", "csaf_version": "2.0", "notes": [ { "category": "summary", "text": "A vulnerability in the Universal Plug-and-Play (UPnP) service of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly, resulting in a denial of service (DoS) condition.\r\n\r\nThis vulnerability is due to improper validation of incoming UPnP traffic. An attacker could exploit this vulnerability by sending a crafted UPnP request to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a DoS condition.\r\n\r\nCisco has not released software updates that address this vulnerability. There are no workarounds that address this vulnerability.\r\n\r\nThis advisory is available at the following link:\r\nhttps://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-cisco-sb-rv-overflow-htpymMB5 [\"https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-cisco-sb-rv-overflow-htpymMB5\"]", "title": "Summary" }, { "category": "general", "text": "This vulnerability affects the following Cisco Small Business RV Series Routers if they have UPnP configured:\r\n\r\nRV110W Wireless-N VPN Firewalls\r\nRV130 VPN Routers\r\nRV130W Wireless-N Multifunction VPN Routers\r\nRV215W Wireless-N VPN Routers\r\n\r\nNote: The UPnP service is enabled by default on LAN interfaces and disabled by default on WAN interfaces. If UPnP is disabled on both the LAN and WAN interfaces, the device is not considered vulnerable.\r\n Determine the UPnP Configuration\r\nTo determine whether the UPnP feature is enabled on the LAN interface of a device, open the web-based management interface and navigate to Basic Settings \u003e UPnP. If the Disable check box is unchecked, UPnP is enabled on the device.", "title": "Vulnerable Products" }, { "category": "general", "text": "Only products listed in the Vulnerable Products [\"#vp\"] section of this advisory are known to be affected by this vulnerability.", "title": "Products Confirmed Not Vulnerable" }, { "category": "general", "text": "There are no workarounds that address this vulnerability. However, administrators may disable the affected feature.\r\n\r\nTo disable UPnP on the LAN interface of a device, do the following:\r\n\r\nOpen the web-based management interface and choose Basic Settings \u003e UPnP.\r\nCheck the Disable check box.\r\n\r\nWhile this mitigation has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.", "title": "Workarounds" }, { "category": "general", "text": "Cisco has not released and will not release software updates to address the vulnerability described in this advisory. The Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers have entered the end-of-life process. Customers are advised to refer to the end-of-life notices for these products:\r\n\r\nEnd-of-Sale and End-of-Life Announcement for the Cisco Small Business RV Series Routers (selected models) [\"https://www.cisco.com/c/en/us/products/collateral/routers/small-business-rv-series-routers/eos-eol-notice-c51-742771.pdf\"]\r\n\r\nCustomers are encouraged to migrate to the Cisco Small Business RV132W, RV160, or RV160W Routers.\r\n\r\nWhen considering a device migration, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page [\"https://www.cisco.com/go/psirt\"], to determine exposure and a complete upgrade solution.\r\n\r\nIn all cases, customers should ensure that new devices will be sufficient for their network needs; the new devices contain sufficient memory, and current hardware and software configurations will continue to be supported properly by the new product. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.", "title": "Fixed Software" }, { "category": "general", "text": "To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html\"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.", "title": "Vulnerability Policy" }, { "category": "general", "text": "The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.", "title": "Exploitation and Public Announcements" }, { "category": "general", "text": "Cisco would like to thank Quentin Kaiser of IoT Inspector Research Lab for reporting this vulnerability.", "title": "Source" }, { "category": "legal_disclaimer", "text": "THIS DOCUMENT IS PROVIDED ON AN \"AS IS\" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.\r\n\r\nA standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.", "title": "Legal Disclaimer" } ], "publisher": { "category": "vendor", "contact_details": "Emergency Support:\r\n+1 877 228 7302 (toll-free within North America)\r\n+1 408 525 6532 (International direct-dial)\r\nNon-emergency Support:\r\nEmail: psirt@cisco.com\r\nSupport requests that are received via e-mail are typically acknowledged within 48 hours.", "issuing_authority": "Cisco product security incident response is the responsibility of the Cisco Product Security Incident Response Team (PSIRT). The Cisco PSIRT is a dedicated, global team that manages the receipt, investigation, and public reporting of security vulnerability information that is related to Cisco products and networks. The on-call Cisco PSIRT works 24x7 with Cisco customers, independent security researchers, consultants, industry organizations, and other vendors to identify possible security issues with Cisco products and networks.\r\nMore information can be found in Cisco Security Vulnerability Policy available at https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html", "name": "Cisco", "namespace": "https://wwww.cisco.com" }, "references": [ { "category": "self", "summary": "Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers Remote Command Execution and Denial of Service Vulnerability", "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-cisco-sb-rv-overflow-htpymMB5" }, { "category": "external", "summary": "Cisco Security Vulnerability Policy", "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html" }, { "category": "external", "summary": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-cisco-sb-rv-overflow-htpymMB5", "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-cisco-sb-rv-overflow-htpymMB5" }, { "category": "external", "summary": "End-of-Sale and End-of-Life Announcement for the Cisco\u0026nbsp;Small Business RV Series Routers (selected models)", "url": "https://www.cisco.com/c/en/us/products/collateral/routers/small-business-rv-series-routers/eos-eol-notice-c51-742771.pdf" }, { "category": "external", "summary": "Cisco\u0026nbsp;Security Advisories page", "url": "https://www.cisco.com/go/psirt" }, { "category": "external", "summary": "Security Vulnerability Policy", "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html" } ], "title": "Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers Remote Command Execution and Denial of Service Vulnerability", "tracking": { "current_release_date": "2021-08-18T16:00:00+00:00", "generator": { "date": "2022-10-22T03:12:03+00:00", "engine": { "name": "TVCE" } }, "id": "cisco-sa-cisco-sb-rv-overflow-htpymMB5", "initial_release_date": "2021-08-18T16:00:00+00:00", "revision_history": [ { "date": "2021-08-18T15:56:22+00:00", "number": "1.0.0", "summary": "Initial public release." } ], "status": "final", "version": "1.0.0" } }, "product_tree": { "branches": [ { "branches": [ { "category": "product_family", "name": "Cisco Small Business RV Series Router Firmware", "product": { "name": "Cisco Small Business RV Series Router Firmware ", "product_id": "CSAFPID-183630" } } ], "category": "vendor", "name": "Cisco" } ] }, "vulnerabilities": [ { "cve": "CVE-2021-34730", "ids": [ { "system_name": "Cisco Bug ID", "text": "CSCvz05607" } ], "notes": [ { "category": "other", "text": "Complete.", "title": "Affected Product Comprehensiveness" } ], "product_status": { "known_affected": [ "CSAFPID-183630" ] }, "release_date": "2021-08-18T16:00:00+00:00", "remediations": [ { "category": "vendor_fix", "details": "Cisco has released software updates that address this vulnerability.", "product_ids": [ "CSAFPID-183630" ], "url": "https://software.cisco.com" } ], "scores": [ { "cvss_v3": { "baseScore": 9.8, "baseSeverity": "CRITICAL", "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H", "version": "3.1" }, "products": [ "CSAFPID-183630" ] } ], "title": "Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers Remote Code Execution and Denial of Service Vulnerabilities" } ] }
Loading...
Loading...
Sightings
Author | Source | Type | Date |
---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
- Confirmed: The vulnerability is confirmed from an analyst perspective.
- Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
- Patched: This vulnerability was successfully patched by the user reporting the sighting.
- Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
- Not confirmed: The user expresses doubt about the veracity of the vulnerability.
- Not patched: This vulnerability was not successfully patched by the user reporting the sighting.