cisco-sa-ftd2100-snort-dos-m9humt75
Vulnerability from csaf_cisco
Published
2024-10-23 16:00
Modified
2024-10-23 16:00
Summary
Cisco Firepower Threat Defense Software for Cisco Firepower 2100 Series Appliances TCP UDP Snort 2 and Snort 3 Denial of Service Vulnerability
Notes
Summary
A vulnerability in the Snort 2 and Snort 3 TCP and UDP detection engine of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Appliances could allow an unauthenticated, remote attacker to cause memory corruption, which could cause the Snort detection engine to restart unexpectedly.
This vulnerability is due to improper memory management when the Snort detection engine processes specific TCP or UDP packets. An attacker could exploit this vulnerability by sending crafted TCP or UDP packets through a device that is inspecting traffic using the Snort detection engine. A successful exploit could allow the attacker to restart the Snort detection engine repeatedly, which could cause a denial of service (DoS) condition. The DoS condition impacts only the traffic through the device that is examined by the Snort detection engine. The device can still be managed over the network.
Note: Once a memory block is corrupted, it cannot be cleared until the Cisco Firepower 2100 Series Appliance is manually reloaded. This means that the Snort detection engine could crash repeatedly, causing traffic that is processed by the Snort detection engine to be dropped until the device is manually reloaded.
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
This advisory is part of the October 2024 release of the Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: October 2024 Semiannual Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication ["https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-75300"].
Vulnerable Products
This vulnerability affects Cisco Firepower 2100 Series Appliances if they are running a vulnerable release of Cisco FTD Software and have a Snort intrusion policy configured.
For information about which Cisco software releases are vulnerable, see the Fixed Software ["#fs"] section of this advisory.
Determine the Snort Configuration on Cisco FTD Software
On new installations of Cisco FTD Software releases 7.0.0 and later, Snort 3 is running by default. On devices that were running Cisco FTD Software Release 6.7.0 or earlier and were upgraded to Release 7.0.0 or later, Snort 2 is running by default.
To determine if Snort is running on Cisco FTD Software, see Determine the Active Snort Version that Runs on Firepower Threat Defense (FTD) ["https://www.cisco.com/c/en/us/support/docs/security/secure-firewall-threat-defense/220415-determine-the-active-snort-version-that.html"]. Snort 2 or Snort 3 must be active for this vulnerability to be exploited.
Products Confirmed Not Vulnerable
Only products listed in the Vulnerable Products ["#vp"] section of this advisory are known to be affected by this vulnerability.
Cisco has confirmed that this vulnerability does not affect the following products:
Cisco Adaptive Security Appliance (ASA) Software
Cisco Cyber Vision
Cisco FTD Software if it is running on any platform other than Firepower 2100 Series Appliances
Cisco IOS XE Software
Cisco Meraki Appliances
Cisco Secure Firewall Management Center (FMC) Software, formerly Firepower Management Center Software
Open Source Snort 2
Open Source Snort 3
Workarounds
There are no workarounds that address this vulnerability.
Fixed Software
Cisco has released free software updates ["https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#ssu"] that address the vulnerability described in this advisory. Customers with service contracts that entitle them to regular software updates should obtain security fixes through their usual update channels.
Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license:
https://www.cisco.com/c/en/us/products/end-user-license-agreement.html ["https://www.cisco.com/c/en/us/products/end-user-license-agreement.html"]
Additionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.
The Cisco Support and Downloads page ["https://www.cisco.com/c/en/us/support/index.html"] on Cisco.com provides information about licensing and downloads. This page can also display customer device support coverage for customers who use the My Devices tool.
When considering software upgrades ["https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes"], customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page ["https://www.cisco.com/go/psirt"], to determine exposure and a complete upgrade solution.
In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.
Customers Without Service Contracts
Customers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC: https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html ["https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html"]
Customers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.
Cisco ASA, FMC, and FTD Software
To help customers determine their exposure to vulnerabilities in Cisco ASA, FMC, and FTD Software, Cisco provides the Cisco Software Checker ["https://sec.cloudapps.cisco.com/security/center/softwarechecker.x"]. This tool identifies any Cisco security advisories that impact a specific software release and the earliest release that fixes the vulnerabilities that are described in each advisory (“First Fixed”). If applicable, the tool also returns the earliest release that fixes all the vulnerabilities that are described in all the advisories that the Software Checker identifies (“Combined First Fixed”).
To use the tool, go to the Cisco Software Checker ["https://sec.cloudapps.cisco.com/security/center/softwarechecker.x"] page and follow the instructions. Alternatively, use the following form to search for vulnerabilities that affect a specific software release. To use the form, follow these steps:
Choose which advisories the tool will search—all advisories, only advisories with a Critical or High Security Impact Rating (SIR) ["https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#asr"], or only this advisory.
Choose the appropriate software.
Choose the appropriate platform.
Enter a release number—for example, 9.16.2.11 for Cisco ASA Software or 6.6.7 for Cisco FTD Software.
Click Check.
Only this advisory All Critical and High advisories All advisories Cisco ASA Software Cisco FMC Software Cisco FTD Software Any Platform 3000 Series Industrial Security Appliances (ISA) ASA 5500-X Series Firewalls ASA Service Module Adaptive Security Virtual Appliance (ASAv) Firepower 1000 Series Firepower 2100 Series Firepower 4100 Series Firepower 9000 Series Firepower NGFW Virtual Secure Firewall 3100 Series Firepower Management Center Appliances
For instructions on upgrading a Cisco FTD device, see the appropriate Cisco FMC upgrade guide ["https://www.cisco.com/c/en/us/support/security/defense-center/products-installation-guides-list.html"].
Cisco FTD Software Hot Fixes
Cisco has released the following hot fix to address this vulnerability. Customers can download the hot fix from the Software Center ["https://software.cisco.com/download/home"] on Cisco.com.
Cisco FTD Software ReleaseHot Fix Name7.0Cisco_FTD_SSP_FP2K_Hotfix_FJ-7.0.6.4-1.sh.REL.tar
For details about downloading and installing this hot fix, see Cisco Firepower Hot Fix Release Notes ["https://www.cisco.com/c/en/us/td/docs/security/firepower/hotfix/Firepower_Hotfix_Release_Notes/about-firepower-hotfixes.html"].
The Cisco Product Security Incident Response Team (PSIRT) validates only the affected and fixed release information that is documented in this advisory.
Additional Resources
For help determining the best Cisco ASA, FMC, or FTD Software release, see the following Recommended Releases documents. If a security advisory recommends a later release, Cisco recommends following the advisory guidance.
Cisco ASA Compatibility ["https://www.cisco.com/c/en/us/td/docs/security/asa/compatibility/asamatrx.html"]
Cisco Secure Firewall ASA Upgrade Guide ["https://www.cisco.com/c/en/us/td/docs/security/asa/upgrade/asa-upgrade/planning.html"]
Cisco Secure Firewall Threat Defense Compatibility Guide ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/compatibility/threat-defense-compatibility.html"]
Vulnerability Policy
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy ["http://www.cisco.com/web/about/security/psirt/security_vulnerability_policy.html"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
Exploitation and Public Announcements
The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.
Source
This vulnerability was found during the resolution of a Cisco TAC support case.
Legal Disclaimer
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.
{ "document": { "acknowledgments": [ { "summary": "This vulnerability was found during the resolution of a Cisco TAC support case." } ], "category": "csaf_security_advisory", "csaf_version": "2.0", "notes": [ { "category": "summary", "text": "A vulnerability in the Snort 2 and Snort 3 TCP and UDP detection engine of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Appliances could allow an unauthenticated, remote attacker to cause memory corruption, which could cause the Snort detection engine to restart unexpectedly.\r\n\r\nThis vulnerability is due to improper memory management when the Snort detection engine processes specific TCP or UDP packets. An attacker could exploit this vulnerability by sending crafted TCP or UDP packets through a device that is inspecting traffic using the Snort detection engine. A successful exploit could allow the attacker to restart the Snort detection engine repeatedly, which could cause a denial of service (DoS) condition. The DoS condition impacts only the traffic through the device that is examined by the Snort detection engine. The device can still be managed over the network.\r\n\r\nNote: Once a memory block is corrupted, it cannot be cleared until the Cisco Firepower 2100 Series Appliance is manually reloaded. This means that the Snort detection engine could crash repeatedly, causing traffic that is processed by the Snort detection engine to be dropped until the device is manually reloaded.\r\n\r\nCisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.\r\n\r\n\r\n\r\nThis advisory is part of the October 2024 release of the Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: October 2024 Semiannual Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication [\"https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-75300\"].", "title": "Summary" }, { "category": "general", "text": "This vulnerability affects Cisco Firepower 2100 Series Appliances if they are running a vulnerable release of Cisco FTD Software and have a Snort intrusion policy configured.\r\n\r\nFor information about which Cisco software releases are vulnerable, see the Fixed Software [\"#fs\"] section of this advisory.\r\n Determine the Snort Configuration on Cisco FTD Software\r\nOn new installations of Cisco FTD Software releases 7.0.0 and later, Snort 3 is running by default. On devices that were running Cisco FTD Software Release 6.7.0 or earlier and were upgraded to Release 7.0.0 or later, Snort 2 is running by default.\r\n\r\nTo determine if Snort is running on Cisco FTD Software, see Determine the Active Snort Version that Runs on Firepower Threat Defense (FTD) [\"https://www.cisco.com/c/en/us/support/docs/security/secure-firewall-threat-defense/220415-determine-the-active-snort-version-that.html\"]. Snort 2 or Snort 3 must be active for this vulnerability to be exploited.", "title": "Vulnerable Products" }, { "category": "general", "text": "Only products listed in the Vulnerable Products [\"#vp\"] section of this advisory are known to be affected by this vulnerability.\r\n\r\nCisco has confirmed that this vulnerability does not affect the following products:\r\n\r\nCisco Adaptive Security Appliance (ASA) Software\r\nCisco Cyber Vision\r\nCisco FTD Software if it is running on any platform other than Firepower 2100 Series Appliances\r\nCisco IOS XE Software\r\nCisco Meraki Appliances\r\nCisco Secure Firewall Management Center (FMC) Software, formerly Firepower Management Center Software\r\nOpen Source Snort 2\r\nOpen Source Snort 3", "title": "Products Confirmed Not Vulnerable" }, { "category": "general", "text": "There are no workarounds that address this vulnerability.", "title": "Workarounds" }, { "category": "general", "text": "Cisco has released free software updates [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#ssu\"] that address the vulnerability described in this advisory. Customers with service contracts that entitle them to regular software updates should obtain security fixes through their usual update channels.\r\n\r\nCustomers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license:\r\nhttps://www.cisco.com/c/en/us/products/end-user-license-agreement.html [\"https://www.cisco.com/c/en/us/products/end-user-license-agreement.html\"]\r\n\r\nAdditionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.\r\n\r\nThe Cisco Support and Downloads page [\"https://www.cisco.com/c/en/us/support/index.html\"] on Cisco.com provides information about licensing and downloads. This page can also display customer device support coverage for customers who use the My Devices tool.\r\n\r\nWhen considering software upgrades [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes\"], customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page [\"https://www.cisco.com/go/psirt\"], to determine exposure and a complete upgrade solution.\r\n\r\nIn all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.\r\nCustomers Without Service Contracts\r\nCustomers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC: https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html [\"https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html\"]\r\n\r\nCustomers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.\r\nCisco ASA, FMC, and FTD Software\r\nTo help customers determine their exposure to vulnerabilities in Cisco ASA, FMC, and FTD Software, Cisco provides the Cisco Software Checker [\"https://sec.cloudapps.cisco.com/security/center/softwarechecker.x\"]. This tool identifies any Cisco security advisories that impact a specific software release and the earliest release that fixes the vulnerabilities that are described in each advisory (\u201cFirst Fixed\u201d). If applicable, the tool also returns the earliest release that fixes all the vulnerabilities that are described in all the advisories that the Software Checker identifies (\u201cCombined First Fixed\u201d).\r\n\r\nTo use the tool, go to the Cisco Software Checker [\"https://sec.cloudapps.cisco.com/security/center/softwarechecker.x\"] page and follow the instructions. Alternatively, use the following form to search for vulnerabilities that affect a specific software release. To use the form, follow these steps:\r\n\r\nChoose which advisories the tool will search\u2014all advisories, only advisories with a Critical or High Security Impact Rating (SIR) [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#asr\"], or only this advisory.\r\nChoose the appropriate software.\r\nChoose the appropriate platform.\r\nEnter a release number\u2014for example, 9.16.2.11 for Cisco ASA Software or 6.6.7 for Cisco FTD Software.\r\nClick Check.\r\n Only this advisory All Critical and High advisories All advisories Cisco ASA Software Cisco FMC Software Cisco FTD Software Any Platform 3000 Series Industrial Security Appliances (ISA) ASA 5500-X Series Firewalls ASA Service Module Adaptive Security Virtual Appliance (ASAv) Firepower 1000 Series Firepower 2100 Series Firepower 4100 Series Firepower 9000 Series Firepower NGFW Virtual Secure Firewall 3100 Series Firepower Management Center Appliances\r\n\r\n\r\n\r\n\r\nFor instructions on upgrading a Cisco FTD device, see the appropriate Cisco FMC upgrade guide [\"https://www.cisco.com/c/en/us/support/security/defense-center/products-installation-guides-list.html\"].\r\nCisco FTD Software Hot Fixes\r\nCisco has released the following hot fix to address this vulnerability. Customers can download the hot fix from the Software Center [\"https://software.cisco.com/download/home\"] on Cisco.com.\r\nCisco FTD Software ReleaseHot Fix Name7.0Cisco_FTD_SSP_FP2K_Hotfix_FJ-7.0.6.4-1.sh.REL.tar\r\nFor details about downloading and installing this hot fix, see Cisco Firepower Hot Fix Release Notes [\"https://www.cisco.com/c/en/us/td/docs/security/firepower/hotfix/Firepower_Hotfix_Release_Notes/about-firepower-hotfixes.html\"].\r\n\r\nThe Cisco Product Security Incident Response Team (PSIRT) validates only the affected and fixed release information that is documented in this advisory.\r\nAdditional Resources\r\nFor help determining the best Cisco ASA, FMC, or FTD Software release, see the following Recommended Releases documents. If a security advisory recommends a later release, Cisco recommends following the advisory guidance.\r\n\r\nCisco ASA Compatibility [\"https://www.cisco.com/c/en/us/td/docs/security/asa/compatibility/asamatrx.html\"]\r\nCisco Secure Firewall ASA Upgrade Guide [\"https://www.cisco.com/c/en/us/td/docs/security/asa/upgrade/asa-upgrade/planning.html\"]\r\nCisco Secure Firewall Threat Defense Compatibility Guide [\"https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/compatibility/threat-defense-compatibility.html\"]", "title": "Fixed Software" }, { "category": "general", "text": "To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy [\"http://www.cisco.com/web/about/security/psirt/security_vulnerability_policy.html\"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.", "title": "Vulnerability Policy" }, { "category": "general", "text": "The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.", "title": "Exploitation and Public Announcements" }, { "category": "general", "text": "This vulnerability was found during the resolution of a Cisco TAC support case.", "title": "Source" }, { "category": "legal_disclaimer", "text": "THIS DOCUMENT IS PROVIDED ON AN \"AS IS\" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.\r\n\r\nA standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.", "title": "Legal Disclaimer" } ], "publisher": { "category": "vendor", "contact_details": "psirt@cisco.com", "issuing_authority": "Cisco PSIRT", "name": "Cisco", "namespace": "https://wwww.cisco.com" }, "references": [ { "category": "self", "summary": "Cisco Firepower Threat Defense Software for Cisco Firepower 2100 Series Appliances TCP UDP Snort 2 and Snort 3 Denial of Service Vulnerability", "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ftd2100-snort-dos-M9HuMt75" }, { "category": "external", "summary": "Cisco Event Response: October 2024 Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication", "url": "https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-75300" }, { "category": "external", "summary": "Cisco Security Vulnerability Policy", "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html" }, { "category": "external", "summary": "Determine the Active Snort Version that Runs on Firepower Threat Defense (FTD)", "url": "https://www.cisco.com/c/en/us/support/docs/security/secure-firewall-threat-defense/220415-determine-the-active-snort-version-that.html" }, { "category": "external", "summary": "free software updates", "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#ssu" }, { "category": "external", "summary": "https://www.cisco.com/c/en/us/products/end-user-license-agreement.html", "url": "https://www.cisco.com/c/en/us/products/end-user-license-agreement.html" }, { "category": "external", "summary": "Cisco Support and Downloads page", "url": "https://www.cisco.com/c/en/us/support/index.html" }, { "category": "external", "summary": "considering software upgrades", "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes" }, { "category": "external", "summary": "Cisco Security Advisories page", "url": "https://www.cisco.com/go/psirt" }, { "category": "external", "summary": "https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html", "url": "https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html" }, { "category": "external", "summary": "Cisco Software Checker", "url": "https://sec.cloudapps.cisco.com/security/center/softwarechecker.x" }, { "category": "external", "summary": "Security Impact Rating (SIR)", "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#asr" }, { "category": "external", "summary": "Cisco FMC upgrade guide", "url": "https://www.cisco.com/c/en/us/support/security/defense-center/products-installation-guides-list.html" }, { "category": "external", "summary": "Software Center", "url": "https://software.cisco.com/download/home" }, { "category": "external", "summary": "Cisco Firepower Hot Fix Release Notes", "url": "https://www.cisco.com/c/en/us/td/docs/security/firepower/hotfix/Firepower_Hotfix_Release_Notes/about-firepower-hotfixes.html" }, { "category": "external", "summary": "Cisco ASA Compatibility", "url": "https://www.cisco.com/c/en/us/td/docs/security/asa/compatibility/asamatrx.html" }, { "category": "external", "summary": "Cisco Secure Firewall ASA Upgrade Guide", "url": "https://www.cisco.com/c/en/us/td/docs/security/asa/upgrade/asa-upgrade/planning.html" }, { "category": "external", "summary": "Cisco Secure Firewall Threat Defense Compatibility Guide", "url": "https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/compatibility/threat-defense-compatibility.html" }, { "category": "external", "summary": "Security Vulnerability Policy", "url": "http://www.cisco.com/web/about/security/psirt/security_vulnerability_policy.html" } ], "title": "Cisco Firepower Threat Defense Software for Cisco Firepower 2100 Series Appliances TCP UDP Snort 2 and Snort 3 Denial of Service Vulnerability", "tracking": { "current_release_date": "2024-10-23T16:00:00+00:00", "generator": { "date": "2024-10-23T16:00:54+00:00", "engine": { "name": "TVCE" } }, "id": "cisco-sa-ftd2100-snort-dos-M9HuMt75", "initial_release_date": "2024-10-23T16:00:00+00:00", "revision_history": [ { "date": "2024-10-23T15:57:48+00:00", "number": "1.0.0", "summary": "Initial public release." } ], "status": "final", "version": "1.0.0" } }, "product_tree": { "branches": [ { "branches": [ { "branches": [ { "branches": [ { "category": "service_pack", "name": "7.0.0", "product": { "name": "7.0.0", "product_id": "CSAFPID-282695" } }, { "category": "service_pack", "name": "7.0.0.1", "product": { "name": "7.0.0.1", "product_id": "CSAFPID-284277" } }, { "category": "service_pack", "name": "7.0.1", "product": { "name": "7.0.1", "product_id": "CSAFPID-284789" } }, { "category": "service_pack", "name": "7.0.1.1", "product": { "name": "7.0.1.1", "product_id": "CSAFPID-286538" } }, { "category": "service_pack", "name": "7.0.2", "product": { "name": "7.0.2", "product_id": "CSAFPID-286930" } }, { "category": "service_pack", "name": "7.0.2.1", "product": { "name": "7.0.2.1", "product_id": "CSAFPID-287122" } }, { "category": "service_pack", "name": "7.0.3", "product": { "name": "7.0.3", "product_id": "CSAFPID-287181" } }, { "category": "service_pack", "name": "7.0.4", "product": { "name": "7.0.4", "product_id": "CSAFPID-290481" } }, { "category": "service_pack", "name": "7.0.5", "product": { "name": "7.0.5", "product_id": "CSAFPID-290663" } }, { "category": "service_pack", "name": "7.0.6", "product": { "name": "7.0.6", "product_id": "CSAFPID-300119" } }, { "category": "service_pack", "name": "7.0.6.1", "product": { "name": "7.0.6.1", "product_id": "CSAFPID-300943" } }, { "category": "service_pack", "name": "7.0.6.2", "product": { "name": "7.0.6.2", "product_id": "CSAFPID-301605" } }, { "category": "service_pack", "name": "7.0.6.3", "product": { "name": "7.0.6.3", "product_id": "CSAFPID-302848" } } ], "category": "product_version", "name": "7.0" }, { "branches": [ { "category": "service_pack", "name": "7.1.0", "product": { "name": "7.1.0", "product_id": "CSAFPID-286091" } }, { "category": "service_pack", "name": "7.1.0.1", "product": { "name": "7.1.0.1", "product_id": "CSAFPID-286543" } }, { "category": "service_pack", "name": "7.1.0.3", "product": { "name": "7.1.0.3", "product_id": "CSAFPID-290468" } } ], "category": "product_version", "name": "7.1" }, { "branches": [ { "category": "service_pack", "name": "7.2.0", "product": { "name": "7.2.0", "product_id": "CSAFPID-287081" } }, { "category": "service_pack", "name": "7.2.0.1", "product": { "name": "7.2.0.1", "product_id": "CSAFPID-290469" } }, { "category": "service_pack", "name": "7.2.1", "product": { "name": "7.2.1", "product_id": "CSAFPID-290563" } }, { "category": "service_pack", "name": "7.2.2", "product": { "name": "7.2.2", "product_id": "CSAFPID-292413" } }, { "category": "service_pack", "name": "7.2.3", "product": { "name": "7.2.3", "product_id": "CSAFPID-294794" } }, { "category": "service_pack", "name": "7.2.4", "product": { "name": "7.2.4", "product_id": "CSAFPID-295425" } }, { "category": "service_pack", "name": "7.2.4.1", "product": { "name": "7.2.4.1", "product_id": "CSAFPID-300184" } }, { "category": "service_pack", "name": "7.2.5", "product": { "name": "7.2.5", "product_id": "CSAFPID-300185" } }, { "category": "service_pack", "name": "7.2.5.1", "product": { "name": "7.2.5.1", "product_id": "CSAFPID-300945" } }, { "category": "service_pack", "name": "7.2.6", "product": { "name": "7.2.6", "product_id": "CSAFPID-301469" } }, { "category": "service_pack", "name": "7.2.7", "product": { "name": "7.2.7", "product_id": "CSAFPID-301636" } }, { "category": "service_pack", "name": "7.2.5.2", "product": { "name": "7.2.5.2", "product_id": "CSAFPID-301703" } }, { "category": "service_pack", "name": "7.2.8", "product": { "name": "7.2.8", "product_id": "CSAFPID-302629" } }, { "category": "service_pack", "name": "7.2.8.1", "product": { "name": "7.2.8.1", "product_id": "CSAFPID-302815" } } ], "category": "product_version", "name": "7.2" }, { "branches": [ { "category": "service_pack", "name": "7.3.0", "product": { "name": "7.3.0", "product_id": "CSAFPID-292363" } }, { "category": "service_pack", "name": "7.3.1", "product": { "name": "7.3.1", "product_id": "CSAFPID-294962" } }, { "category": "service_pack", "name": "7.3.1.1", "product": { "name": "7.3.1.1", "product_id": "CSAFPID-300512" } }, { "category": "service_pack", "name": "7.3.1.2", "product": { "name": "7.3.1.2", "product_id": "CSAFPID-301705" } } ], "category": "product_version", "name": "7.3" }, { "branches": [ { "category": "service_pack", "name": "7.4.1", "product": { "name": "7.4.1", "product_id": "CSAFPID-301109" } }, { "category": "service_pack", "name": "7.4.1.1", "product": { "name": "7.4.1.1", "product_id": "CSAFPID-301606" } }, { "category": "service_pack", "name": "7.4.2", "product": { "name": "7.4.2", "product_id": "CSAFPID-302686" } } ], "category": "product_version", "name": "7.4" } ], "category": "product_family", "name": "Cisco Firepower Threat Defense Software" }, { "category": "product_name", "name": "Cisco Firepower 2100 Series", "product": { "name": "Cisco Firepower 2100 Series", "product_id": "CSAFPID-277392" } } ], "category": "vendor", "name": "Cisco" } ], "relationships": [ { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.0.0 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-282695:277392" }, "product_reference": "CSAFPID-282695", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.0.0.1 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-284277:277392" }, "product_reference": "CSAFPID-284277", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.0.1 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-284789:277392" }, "product_reference": "CSAFPID-284789", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.0.1.1 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-286538:277392" }, "product_reference": "CSAFPID-286538", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.0.2 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-286930:277392" }, "product_reference": "CSAFPID-286930", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.0.2.1 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-287122:277392" }, "product_reference": "CSAFPID-287122", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.0.3 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-287181:277392" }, "product_reference": "CSAFPID-287181", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.0.4 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-290481:277392" }, "product_reference": "CSAFPID-290481", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.0.5 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-290663:277392" }, "product_reference": "CSAFPID-290663", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.0.6 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-300119:277392" }, "product_reference": "CSAFPID-300119", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.0.6.1 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-300943:277392" }, "product_reference": "CSAFPID-300943", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.0.6.2 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-301605:277392" }, "product_reference": "CSAFPID-301605", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.0.6.3 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-302848:277392" }, "product_reference": "CSAFPID-302848", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.1.0 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-286091:277392" }, "product_reference": "CSAFPID-286091", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.1.0.1 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-286543:277392" }, "product_reference": "CSAFPID-286543", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.1.0.3 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-290468:277392" }, "product_reference": "CSAFPID-290468", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.2.0 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-287081:277392" }, "product_reference": "CSAFPID-287081", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.2.0.1 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-290469:277392" }, "product_reference": "CSAFPID-290469", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.2.1 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-290563:277392" }, "product_reference": "CSAFPID-290563", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.2.2 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-292413:277392" }, "product_reference": "CSAFPID-292413", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.2.3 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-294794:277392" }, "product_reference": "CSAFPID-294794", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.2.4 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-295425:277392" }, "product_reference": "CSAFPID-295425", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.2.4.1 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-300184:277392" }, "product_reference": "CSAFPID-300184", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.2.5 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-300185:277392" }, "product_reference": "CSAFPID-300185", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.2.5.1 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-300945:277392" }, "product_reference": "CSAFPID-300945", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.2.6 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-301469:277392" }, "product_reference": "CSAFPID-301469", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.2.7 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-301636:277392" }, "product_reference": "CSAFPID-301636", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.2.5.2 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-301703:277392" }, "product_reference": "CSAFPID-301703", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.2.8 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-302629:277392" }, "product_reference": "CSAFPID-302629", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.2.8.1 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-302815:277392" }, "product_reference": "CSAFPID-302815", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.3.0 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-292363:277392" }, "product_reference": "CSAFPID-292363", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.3.1 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-294962:277392" }, "product_reference": "CSAFPID-294962", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.3.1.1 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-300512:277392" }, "product_reference": "CSAFPID-300512", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.3.1.2 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-301705:277392" }, "product_reference": "CSAFPID-301705", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.4.1 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-301109:277392" }, "product_reference": "CSAFPID-301109", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.4.1.1 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-301606:277392" }, "product_reference": "CSAFPID-301606", "relates_to_product_reference": "CSAFPID-277392" }, { "category": "installed_on", "full_product_name": { "name": "Cisco Firepower Threat Defense Software 7.4.2 when installed on Cisco Firepower 2100 Series", "product_id": "CSAFPID-302686:277392" }, "product_reference": "CSAFPID-302686", "relates_to_product_reference": "CSAFPID-277392" } ] }, "vulnerabilities": [ { "cve": "CVE-2024-20330", "ids": [ { "system_name": "Cisco Bug ID", "text": "CSCwk48488" } ], "notes": [ { "category": "other", "text": "Complete.", "title": "Affected Product Comprehensiveness" } ], "product_status": { "known_affected": [ "CSAFPID-282695:277392", "CSAFPID-284277:277392", "CSAFPID-284789:277392", "CSAFPID-286091:277392", "CSAFPID-286538:277392", "CSAFPID-286543:277392", "CSAFPID-286930:277392", "CSAFPID-287081:277392", "CSAFPID-287122:277392", "CSAFPID-287181:277392", "CSAFPID-290468:277392", "CSAFPID-290469:277392", "CSAFPID-290481:277392", "CSAFPID-290563:277392", "CSAFPID-290663:277392", "CSAFPID-292363:277392", "CSAFPID-292413:277392", "CSAFPID-294794:277392", "CSAFPID-294962:277392", "CSAFPID-295425:277392", "CSAFPID-300119:277392", "CSAFPID-300184:277392", "CSAFPID-300185:277392", "CSAFPID-300512:277392", "CSAFPID-300943:277392", "CSAFPID-300945:277392", "CSAFPID-301109:277392", "CSAFPID-301469:277392", "CSAFPID-301605:277392", "CSAFPID-301606:277392", "CSAFPID-301636:277392", "CSAFPID-301703:277392", "CSAFPID-301705:277392", "CSAFPID-302629:277392", "CSAFPID-302686:277392", "CSAFPID-302815:277392", "CSAFPID-302848:277392" ] }, "release_date": "2024-10-23T16:00:00+00:00", "remediations": [ { "category": "vendor_fix", "details": "Cisco has released software updates that address this vulnerability.", "product_ids": [ "CSAFPID-282695:277392", "CSAFPID-284277:277392", "CSAFPID-284789:277392", "CSAFPID-286091:277392", "CSAFPID-286538:277392", "CSAFPID-286543:277392", "CSAFPID-286930:277392", "CSAFPID-287081:277392", "CSAFPID-287122:277392", "CSAFPID-287181:277392", "CSAFPID-290468:277392", "CSAFPID-290469:277392", "CSAFPID-290481:277392", "CSAFPID-290563:277392", "CSAFPID-290663:277392", "CSAFPID-292363:277392", "CSAFPID-292413:277392", "CSAFPID-294794:277392", "CSAFPID-294962:277392", "CSAFPID-295425:277392", "CSAFPID-300119:277392", "CSAFPID-300184:277392", "CSAFPID-300185:277392", "CSAFPID-300512:277392", "CSAFPID-300943:277392", "CSAFPID-300945:277392", "CSAFPID-301109:277392", "CSAFPID-301469:277392", "CSAFPID-301605:277392", "CSAFPID-301606:277392", "CSAFPID-301636:277392", "CSAFPID-301703:277392", "CSAFPID-301705:277392", "CSAFPID-302629:277392", "CSAFPID-302686:277392", "CSAFPID-302815:277392", "CSAFPID-302848:277392" ], "url": "https://software.cisco.com" } ], "scores": [ { "cvss_v3": { "baseScore": 8.6, "baseSeverity": "HIGH", "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:H", "version": "3.1" }, "products": [ "CSAFPID-282695:277392", "CSAFPID-284277:277392", "CSAFPID-284789:277392", "CSAFPID-286091:277392", "CSAFPID-286538:277392", "CSAFPID-286543:277392", "CSAFPID-286930:277392", "CSAFPID-287081:277392", "CSAFPID-287122:277392", "CSAFPID-287181:277392", "CSAFPID-290468:277392", "CSAFPID-290469:277392", "CSAFPID-290481:277392", "CSAFPID-290563:277392", "CSAFPID-290663:277392", "CSAFPID-292363:277392", "CSAFPID-292413:277392", "CSAFPID-294794:277392", "CSAFPID-294962:277392", "CSAFPID-295425:277392", "CSAFPID-300119:277392", "CSAFPID-300184:277392", "CSAFPID-300185:277392", "CSAFPID-300512:277392", "CSAFPID-300943:277392", "CSAFPID-300945:277392", "CSAFPID-301109:277392", "CSAFPID-301469:277392", "CSAFPID-301605:277392", "CSAFPID-301606:277392", "CSAFPID-301636:277392", "CSAFPID-301703:277392", "CSAFPID-301705:277392", "CSAFPID-302629:277392", "CSAFPID-302686:277392", "CSAFPID-302815:277392", "CSAFPID-302848:277392" ] } ], "title": "Cisco Firepower Threat Defense Software for Cisco Firepower 2100 Series TCP UDP Snort 2 and Snort 2 Denial of Service Vulnerability" } ] }
Loading...
Loading...
Sightings
Author | Source | Type | Date |
---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
- Confirmed: The vulnerability is confirmed from an analyst perspective.
- Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
- Patched: This vulnerability was successfully patched by the user reporting the sighting.
- Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
- Not confirmed: The user expresses doubt about the veracity of the vulnerability.
- Not patched: This vulnerability was not successfully patched by the user reporting the sighting.