{
  "document": {
    "acknowledgments": [
      {
        "summary": "These vulnerabilities were found during internal security testing by Zack Sanchez of the Cisco Advanced Security Initiatives Group (ASIG)."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "notes": [
      {
        "category": "summary",
        "text": "Multiple vulnerabilities in Cisco ATA 190 Series Analog Telephone Adapter firmware, both on-premises and multiplatform, could allow a remote attacker to delete or change the configuration, execute commands as the root user, conduct a cross-site scripting (XSS) attack against a user of the interface, view passwords, conduct a cross-site request forgery (CSRF) attack, or reboot the device.\r\n\r\nFor more information about these vulnerabilities, see the Details [\"#details\"] section of this advisory.\r\n\r\nCisco has released firmware updates that address these vulnerabilities. There are no workarounds that address these vulnerabilities. However, there is a mitigation that addresses some of these vulnerabilities for Cisco ATA 191 on-premises firmware only.\r\n\r\n",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "These vulnerabilities affect the following Cisco products if they are running a vulnerable release of Cisco ATA 190 Series on-premises firmware or Cisco ATA 190 Series multiplatform firmware:\r\n\r\nATA 191 (on-premises or multiplatform)\r\nATA 192 (multiplatform)\r\n\r\nFor information about which Cisco firmware releases are vulnerable, see the Fixed Software [\"#fs\"] section of this advisory.",
        "title": "Vulnerable Products"
      },
      {
        "category": "general",
        "text": "Only products listed in the Vulnerable Products [\"#vp\"] section of this advisory are known to be affected by these vulnerabilities.",
        "title": "Products Confirmed Not Vulnerable"
      },
      {
        "category": "general",
        "text": "The vulnerabilities are not dependent on one another. Exploitation of one of the vulnerabilities is not required to exploit another vulnerability. In addition, a firmware release that is affected by one of the vulnerabilities may not be affected by the other vulnerabilities.\r\n\r\nDetails about the vulnerabilities are as follows:\r\n\r\nCVE-2024-20458: Cisco ATA 190 Series Analog Telephone Adapter Firmware Authentication Vulnerability\r\n\r\nA vulnerability in the web-based management interface of Cisco ATA 190 Series Analog Telephone Adapter firmware could allow an unauthenticated, remote attacker to view or delete the configuration or change the firmware on an affected device.\r\n\r\nThis vulnerability is due to a lack of authentication on specific HTTP endpoints. An attacker could exploit this vulnerability by browsing to a specific URL. A successful exploit could allow the attacker to view or delete the configuration or change the firmware.\r\n\r\nCisco has released firmware updates that address this vulnerability. There are no workarounds that address this vulnerability. However, there is a mitigation. For instructions, see the Workarounds [\"#workarounds\"] section of this advisory.\r\n\r\nBug ID(s): CSCwf28097 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28097\"], CSCwf28102 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28102\"]\r\nCVE ID: CVE-2024-20458\r\nSecurity Impact Rating (SIR): High\r\nCVSS Base Score: Base 8.2\r\nCVSS Vector: CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:L\r\n\r\nCVE-2024-20421: Cisco ATA 190 Series Analog Telephone Adapter Firmware Cross-Site Request Forgery Vulnerability\r\n\r\nA vulnerability in the web-based management interface of Cisco ATA 190 Series Analog Telephone Adapter firmware could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack and perform arbitrary actions on an affected device.\r\n\r\nThis vulnerability is due to insufficient CSRF protections for the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a user to follow a crafted link. A successful exploit could allow the attacker to perform arbitrary actions on the affected device with the privileges of the targeted user.\r\n\r\nCisco has released firmware updates that address this vulnerability. There are no workarounds that address this vulnerability. However, there is a mitigation. For instructions, see the Workarounds [\"#workarounds\"] section of this advisory.\r\n\r\nBug ID(s): CSCwf28426 [\"https://cdetsng.cisco.com/summary/#/defect/CSCwf28426\"], CSCwf28421 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28421\"]\r\nCVE ID: CVE-2024-20421\r\nSecurity Impact Rating (SIR): High\r\nCVSS Base Score: 7.1\r\nCVSS Vector: CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:L\r\n\r\nCVE-2024-20459: Cisco ATA 190 Series Analog Telephone Adapter Multiplatform Firmware Command Injection Vulnerability\r\n\r\nA vulnerability in the web-based management interface of Cisco ATA 190 Multiplatform Series Analog Telephone Adapter firmware could allow an authenticated, remote attacker with high privileges to execute arbitrary commands as the root user on the underlying operating system.\r\n\r\nThis vulnerability is due to a lack of input sanitization in the web-based management interface. An attacker could exploit this vulnerability by sending a malicious request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system as the root user.\r\n\r\nCisco has released firmware updates that address this vulnerability. There are no workarounds that address this vulnerability. However, there is a mitigation. For instructions, see the Workarounds [\"#workarounds\"] section of this advisory.\r\n\r\nBug ID(s): CSCwf28499 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28499\"], CSCwf28048 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28048\"]\r\nCVE ID: CVE-2024-20459\r\nSecurity Impact Rating (SIR): Medium\r\nCVSS Base Score: 6.5\r\nCVSS Vector: CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:N\r\n\r\nCVE-2024-20460: Cisco ATA 190 Series Analog Telephone Adapter Firmware Reflected Cross-Site Scripting Vulnerability\r\n\r\nA vulnerability in the web-based management interface of Cisco ATA 190 Series Analog Telephone Adapter firmware could allow an unauthenticated, remote attacker to conduct a reflected cross-site scripting (XSS) attack against a user.\r\n\r\n\r\nThis vulnerability is due to insufficient validation of user input. An attacker could exploit this vulnerability by persuading a user to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information on an affected device.\r\n\r\nCisco has released firmware updates that address this vulnerability. There are no workarounds that address this vulnerability. However, there is a mitigation. For instructions, see the Workarounds [\"#workarounds\"] section of this advisory.\r\n\r\nBug ID(s): CSCwf28041 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28041\"], CSCwf28037 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28037\"]\r\nCVE ID: CVE-2024-20460\r\nSecurity Impact Rating (SIR): Medium\r\nCVSS Base Score: 6.1\r\nCVSS Vector: CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N\r\n\r\nCVE-2024-20461: Cisco ATA 190 Series Analog Telephone Adapter Firmware Command Injection Vulnerability\r\n\r\nA vulnerability in the CLI of Cisco ATA 190 Series Analog Telephone Adapter firmware could allow an authenticated, local attacker with high privileges to execute arbitrary commands as the root user.\r\n\r\nThis vulnerability exists because CLI input is not properly sanitized. An attacker could exploit this vulnerability by sending malicious characters to the CLI. A successful exploit could allow the attacker to read and write to the underlying operating system as the root user.\r\n\r\nCisco has released firmware updates that address this vulnerability. There are no workarounds that address this vulnerability.\r\n\r\nBug ID(s): CSCwf28378 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28378\"], CSCwf30963 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf30963\"]\r\nCVE ID: CVE-2024-20461\r\nSecurity Impact Rating (SIR): Medium\r\nCVSS Base Score: 6.0\r\nCVSS Vector: CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:N\r\n\r\nCVE-2024-20462: Cisco ATA 190 Series Analog Telephone Adapter Multiplatform Firmware Information Disclosure Vulnerability\r\n\r\nA vulnerability in the web-based management interface of Cisco ATA 190 Series Multiplatform Analog Telephone Adapter firmware could allow an authenticated, local attacker with low privileges to view passwords on an affected device.\r\n\r\n\r\nThis vulnerability is due to incorrect sanitization of HTML content from an affected device. A successful exploit could allow the attacker to view passwords that belong to other users.\r\n\r\n\r\nCisco has released firmware updates that address this vulnerability. There are no workarounds that address this vulnerability.\r\n\r\nBug ID(s): CSCwf28398 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28398\"]\r\nCVE ID: CVE-2024-20462\r\nSecurity Impact Rating (SIR): Medium\r\nCVSS Base Score: 5.5\r\nCVSS Vector: CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N\r\n\r\nCVE-2024-20463: Cisco ATA 190 Series Analog Telephone Adapter Firmware Command Injection and Denial of Service Vulnerability\r\n\r\nA vulnerability in the web-based management interface of Cisco ATA 190 Series Analog Telephone Adapter firmware could allow an unauthenticated, remote attacker to modify the configuration or reboot an affected device.\r\n\r\nThis vulnerability is due to the HTTP server allowing state changes in GET requests. An attacker could exploit this vulnerability by sending a malicious request to the web-based management interface on an affected device. A successful exploit could allow the attacker to make limited modifications to the configuration or reboot the device, resulting in a denial of service (DoS) condition.\r\n\r\nCisco has released firmware updates that address this vulnerability. There are no workarounds that address this vulnerability. However, there is a mitigation. For instructions, see the Workarounds [\"#workarounds\"] section of this advisory.\r\n\r\nBug ID(s): CSCwf28345 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28345\"], CSCwf28348 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28348\"]\r\nCVE ID: CVE-2024-20463\r\nSecurity Impact Rating (SIR): Medium\r\nCVSS Base Score: 5.4\r\nCVSS Vector: CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:L/A:L\r\n\r\nCVE-2024-20420: Cisco ATA 190 Series Analog Telephone Adapter Firmware Privilege Escalation Vulnerability\r\n\r\nA vulnerability in the web-based management interface of Cisco ATA 190 Series Analog Telephone Adapter firmware could allow an authenticated, remote attacker with low privileges to run commands as an Admin user.\r\n\r\nThis vulnerability is due to incorrect authorization verification by the HTTP server. An attacker could exploit this vulnerability by sending a malicious request to the web-based management interface. A successful exploit could allow the attacker to run commands as the Admin user.\r\n\r\n\r\nCisco has released firmware updates that address this vulnerability. There are no workarounds that address this vulnerability. However, there is a mitigation. For instructions, see the Workarounds [\"#workarounds\"] section of this advisory.\r\n\r\nBug ID(s): CSCwf28191 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28191\"], CSCwf28188 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28188\"]\r\nCVE ID: CVE-2024-20420\r\nSecurity Impact Rating (SIR): Medium\r\nCVSS Base Score: 5.4\r\nCVSS Vector: CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:N",
        "title": "Details"
      },
      {
        "category": "general",
        "text": "There are no workarounds that address these vulnerabilities. However, there is a mitigation for the following vulnerabilities only:\r\n\r\nCVE-2024-20458, CVE-2024-20421, CVE-2024-20459, CVE-2024-20460, CVE-2024-20463, CVE-2024-20420\r\n\r\nThe web-based management interface can be disabled in the Cisco ATA 191 on-premises firmware. It is disabled by default. For more information, see the Security Guide for Cisco Unified Communications Manager [\"https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/security/12_5_1/cucm_b_security-guide-1251/cucm_b_security-guide-1251_chapter_01110.html#CUCM_RF_W6644052_00\"].\r\n\r\nWhile this mitigation has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.",
        "title": "Workarounds"
      },
      {
        "category": "general",
        "text": "Cisco has released free software updates [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#ssu\"] that address the vulnerabilities described in this advisory. Customers with service contracts that entitle them to regular software updates should obtain security fixes through their usual update channels.\r\n\r\nCustomers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license:\r\nhttps://www.cisco.com/c/en/us/products/end-user-license-agreement.html [\"https://www.cisco.com/c/en/us/products/end-user-license-agreement.html\"]\r\n\r\nAdditionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.\r\n\r\nThe Cisco Support and Downloads page [\"https://www.cisco.com/c/en/us/support/index.html\"] on Cisco.com provides information about licensing and downloads. This page can also display customer device support coverage for customers who use the My Devices tool.\r\n\r\nWhen considering software upgrades [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes\"], customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page [\"https://www.cisco.com/go/psirt\"], to determine exposure and a complete upgrade solution.\r\n\r\nIn all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.\r\n  Customers Without Service Contracts\r\nCustomers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC: https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html [\"https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html\"]\r\n\r\nCustomers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.\r\n      Fixed Releases\r\nCustomers are advised to upgrade to an appropriate fixed firmware release [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes\"] as indicated in the following table:\r\n        Cisco IP Phone Model  Cisco Bug IDs  Vulnerable Releases  First Fixed Release          ATA 191 Analog Telephone Adapter  CSCwf28102 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28097\"]\r\nCSCwf28041 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28041\"]\r\nCSCwf28378 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28378\"]   CSCwf28348 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28348\"]\r\nCSCwf28191 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28191\"]\r\nCSCwf28426 [\"https://cdetsng.cisco.com/summary/#/defect/CSCwf28426\"]  12.0.1 and earlier  12.0.2      ATA 191 and 192 Multiplatform Analog Telephone Adapter  CSCwf28097 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28097\"]\r\nCSCwf28499 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28499\"]\r\nCSCwf28048 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28048\"]\r\nCSCwf28037 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28037\"]\r\nCSCwf30963 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf30963\"]   CSCwf28398 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28398\"]\r\nCSCwf28345 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28345\"]\r\nCSCwf28188 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28188\"]\r\nCSCwf28421 [\"https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28421\"]   11.2.4 and earlier  11.2.5\r\nThe Cisco Product Security Incident Response Team (PSIRT) validates only the affected and fixed release information that is documented in this advisory.",
        "title": "Fixed Software"
      },
      {
        "category": "general",
        "text": "To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy [\"http://www.cisco.com/web/about/security/psirt/security_vulnerability_policy.html\"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.",
        "title": "Vulnerability Policy"
      },
      {
        "category": "general",
        "text": "The Cisco PSIRT is not aware of any public announcements or malicious use of the vulnerabilities that are described in this advisory.",
        "title": "Exploitation and Public Announcements"
      },
      {
        "category": "general",
        "text": "These vulnerabilities were found during internal security testing by Zack Sanchez of the Cisco Advanced Security Initiatives Group (ASIG).",
        "title": "Source"
      },
      {
        "category": "legal_disclaimer",
        "text": "THIS DOCUMENT IS PROVIDED ON AN \"AS IS\" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.\r\n\r\nA standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.",
        "title": "Legal Disclaimer"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "psirt@cisco.com",
      "issuing_authority": "Cisco PSIRT",
      "name": "Cisco",
      "namespace": "https://wwww.cisco.com"
    },
    "references": [
      {
        "category": "self",
        "summary": "Cisco ATA 190 Series Analog Telephone Adapter Firmware Vulnerabilities",
        "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ata19x-multi-RDTEqRsy"
      },
      {
        "category": "external",
        "summary": "Cisco Security Vulnerability Policy",
        "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html"
      },
      {
        "category": "external",
        "summary": "CSCwf28097",
        "url": "https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28097"
      },
      {
        "category": "external",
        "summary": "CSCwf28102",
        "url": "https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28102"
      },
      {
        "category": "external",
        "summary": "CSCwf28426",
        "url": "https://cdetsng.cisco.com/summary/#/defect/CSCwf28426"
      },
      {
        "category": "external",
        "summary": "CSCwf28421",
        "url": "https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28421"
      },
      {
        "category": "external",
        "summary": "CSCwf28499",
        "url": "https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28499"
      },
      {
        "category": "external",
        "summary": "CSCwf28048",
        "url": "https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28048"
      },
      {
        "category": "external",
        "summary": "CSCwf28041",
        "url": "https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28041"
      },
      {
        "category": "external",
        "summary": "CSCwf28037",
        "url": "https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28037"
      },
      {
        "category": "external",
        "summary": "CSCwf28378",
        "url": "https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28378"
      },
      {
        "category": "external",
        "summary": "CSCwf30963",
        "url": "https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf30963"
      },
      {
        "category": "external",
        "summary": "CSCwf28398",
        "url": "https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28398"
      },
      {
        "category": "external",
        "summary": "CSCwf28345",
        "url": "https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28345"
      },
      {
        "category": "external",
        "summary": "CSCwf28348",
        "url": "https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28348"
      },
      {
        "category": "external",
        "summary": "CSCwf28191",
        "url": "https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28191"
      },
      {
        "category": "external",
        "summary": "CSCwf28188",
        "url": "https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf28188"
      },
      {
        "category": "external",
        "summary": "Security Guide for Cisco Unified Communications Manager",
        "url": "https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/security/12_5_1/cucm_b_security-guide-1251/cucm_b_security-guide-1251_chapter_01110.html#CUCM_RF_W6644052_00"
      },
      {
        "category": "external",
        "summary": "free software updates",
        "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#ssu"
      },
      {
        "category": "external",
        "summary": "https://www.cisco.com/c/en/us/products/end-user-license-agreement.html",
        "url": "https://www.cisco.com/c/en/us/products/end-user-license-agreement.html"
      },
      {
        "category": "external",
        "summary": "Cisco Support and Downloads page",
        "url": "https://www.cisco.com/c/en/us/support/index.html"
      },
      {
        "category": "external",
        "summary": "considering software upgrades",
        "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes"
      },
      {
        "category": "external",
        "summary": "Cisco Security Advisories page",
        "url": "https://www.cisco.com/go/psirt"
      },
      {
        "category": "external",
        "summary": "https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html",
        "url": "https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html"
      },
      {
        "category": "external",
        "summary": "Security Vulnerability Policy",
        "url": "http://www.cisco.com/web/about/security/psirt/security_vulnerability_policy.html"
      }
    ],
    "title": "Cisco ATA 190 Series Analog Telephone Adapter Firmware Vulnerabilities",
    "tracking": {
      "current_release_date": "2024-10-24T11:47:37+00:00",
      "generator": {
        "date": "2024-10-24T11:47:45+00:00",
        "engine": {
          "name": "TVCE"
        }
      },
      "id": "cisco-sa-ata19x-multi-RDTEqRsy",
      "initial_release_date": "2024-10-16T16:00:00+00:00",
      "revision_history": [
        {
          "date": "2024-10-16T15:57:03+00:00",
          "number": "1.0.0",
          "summary": "Initial public release."
        },
        {
          "date": "2024-10-24T11:47:37+00:00",
          "number": "1.1.0",
          "summary": "Added CSCwf28421 to the publication header"
        }
      ],
      "status": "final",
      "version": "1.1.0"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "category": "product_family",
            "name": "Cisco Analog Telephone Adaptor (ATA) Software",
            "product": {
              "name": "Cisco Analog Telephone Adaptor (ATA) Software ",
              "product_id": "CSAFPID-278991"
            }
          }
        ],
        "category": "vendor",
        "name": "Cisco"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2024-20420",
      "ids": [
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCwf28191"
        },
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCwf28188"
        }
      ],
      "notes": [
        {
          "category": "other",
          "text": "Complete.",
          "title": "Affected Product Comprehensiveness"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-278991"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Cisco has released software updates that address this vulnerability.",
          "product_ids": [
            "CSAFPID-278991"
          ],
          "url": "https://software.cisco.com"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-278991"
          ]
        }
      ],
      "title": "Cisco ATA 190 Series Analog Telephone Adapter Firmware Privilege Escalation Vulnerability"
    },
    {
      "cve": "CVE-2024-20459",
      "ids": [
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCwf28048"
        },
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCwf28499"
        }
      ],
      "notes": [
        {
          "category": "other",
          "text": "Complete.",
          "title": "Affected Product Comprehensiveness"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-278991"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Cisco has released software updates that address this vulnerability.",
          "product_ids": [
            "CSAFPID-278991"
          ],
          "url": "https://software.cisco.com"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-278991"
          ]
        }
      ],
      "title": "Cisco ATA 190 Series Analog Telephone Adapter Muliplatform Firmware Command Injection Vulnerability"
    },
    {
      "cve": "CVE-2024-20460",
      "ids": [
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCwf28041"
        },
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCwf28037"
        }
      ],
      "notes": [
        {
          "category": "other",
          "text": "Complete.",
          "title": "Affected Product Comprehensiveness"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-278991"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Cisco has released software updates that address this vulnerability.",
          "product_ids": [
            "CSAFPID-278991"
          ],
          "url": "https://software.cisco.com"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-278991"
          ]
        }
      ],
      "title": "Cisco ATA 190 Series Analog Telephone Adapter Firmware Reflected Cross-Site Scripting Vulnerability"
    },
    {
      "cve": "CVE-2024-20421",
      "ids": [
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCwf28426"
        },
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCwf28421"
        }
      ],
      "notes": [
        {
          "category": "other",
          "text": "Complete.",
          "title": "Affected Product Comprehensiveness"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-278991"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Cisco has released software updates that address this vulnerability.",
          "product_ids": [
            "CSAFPID-278991"
          ],
          "url": "https://software.cisco.com"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-278991"
          ]
        }
      ],
      "title": "Cisco ATA 190 Series Analog Telephone Adapter Firmware Cross-Site Request Forgery Vulnerability"
    },
    {
      "cve": "CVE-2024-20463",
      "ids": [
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCwf28348"
        },
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCwf28345"
        }
      ],
      "notes": [
        {
          "category": "other",
          "text": "Complete.",
          "title": "Affected Product Comprehensiveness"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-278991"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Cisco has released software updates that address this vulnerability.",
          "product_ids": [
            "CSAFPID-278991"
          ],
          "url": "https://software.cisco.com"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-278991"
          ]
        }
      ],
      "title": "Cisco ATA 190 Series Analog Telephone Adapter Firmware Command Injection and Denial of Service Vulnerability"
    },
    {
      "cve": "CVE-2024-20458",
      "ids": [
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCwf28097"
        },
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCwf28102"
        }
      ],
      "notes": [
        {
          "category": "other",
          "text": "Complete.",
          "title": "Affected Product Comprehensiveness"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-278991"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Cisco has released software updates that address this vulnerability.",
          "product_ids": [
            "CSAFPID-278991"
          ],
          "url": "https://software.cisco.com"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-278991"
          ]
        }
      ],
      "title": "Cisco ATA 190 Series Analog Telephone Adapter Software Vulnerabilities"
    },
    {
      "cve": "CVE-2024-20462",
      "ids": [
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCwf28398"
        }
      ],
      "notes": [
        {
          "category": "other",
          "text": "Complete.",
          "title": "Affected Product Comprehensiveness"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-278991"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Cisco has released software updates that address this vulnerability.",
          "product_ids": [
            "CSAFPID-278991"
          ],
          "url": "https://software.cisco.com"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-278991"
          ]
        }
      ],
      "title": "Cisco ATA 190 Series Analog Telephone Adapter Muliplatform Firmware Information Disclosure Vulnerability"
    },
    {
      "cve": "CVE-2024-20461",
      "ids": [
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCwf28378"
        },
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCwf30963"
        }
      ],
      "notes": [
        {
          "category": "other",
          "text": "Complete.",
          "title": "Affected Product Comprehensiveness"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-278991"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Cisco has released software updates that address this vulnerability.",
          "product_ids": [
            "CSAFPID-278991"
          ],
          "url": "https://software.cisco.com"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.0,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-278991"
          ]
        }
      ],
      "title": "Cisco ATA 190 Series Analog Telephone Adapter Firmware Command Injection Vulnerability"
    }
  ]
}

{
  "$ref": "https://www.cert.ssi.gouv.fr/openapi.json",
  "affected_systems": [
    {
      "description": " ATA 191 Analog Telephone Adapter versions 12.0.x ant\u00e9rieures 12.0.2",
      "product": {
        "name": "N/A",
        "vendor": {
          "name": "Cisco",
          "scada": false
        }
      }
    },
    {
      "description": "ATA 191 and 192 Multiplatform Analog Telephone versions ant\u00e9rieures \u00e0 11.2.5",
      "product": {
        "name": "N/A",
        "vendor": {
          "name": "Cisco",
          "scada": false
        }
      }
    }
  ],
  "affected_systems_content": "",
  "content": "## Solutions\n\nSe r\u00e9f\u00e9rer au bulletin de s\u00e9curit\u00e9 de l\u0027\u00e9diteur pour l\u0027obtention des correctifs (cf. section Documentation).",
  "cves": [
    {
      "name": "CVE-2024-20463",
      "url": "https://www.cve.org/CVERecord?id=CVE-2024-20463"
    },
    {
      "name": "CVE-2024-20420",
      "url": "https://www.cve.org/CVERecord?id=CVE-2024-20420"
    },
    {
      "name": "CVE-2024-20460",
      "url": "https://www.cve.org/CVERecord?id=CVE-2024-20460"
    },
    {
      "name": "CVE-2024-20458",
      "url": "https://www.cve.org/CVERecord?id=CVE-2024-20458"
    },
    {
      "name": "CVE-2024-20461",
      "url": "https://www.cve.org/CVERecord?id=CVE-2024-20461"
    },
    {
      "name": "CVE-2024-20462",
      "url": "https://www.cve.org/CVERecord?id=CVE-2024-20462"
    },
    {
      "name": "CVE-2024-20459",
      "url": "https://www.cve.org/CVERecord?id=CVE-2024-20459"
    },
    {
      "name": "CVE-2024-20421",
      "url": "https://www.cve.org/CVERecord?id=CVE-2024-20421"
    }
  ],
  "links": [],
  "reference": "CERTFR-2024-AVI-0897",
  "revisions": [
    {
      "description": "Version initiale",
      "revision_date": "2024-10-17T00:00:00.000000"
    }
  ],
  "risks": [
    {
      "description": "D\u00e9ni de service \u00e0 distance"
    },
    {
      "description": "Injection de code indirecte \u00e0 distance (XSS)"
    },
    {
      "description": "Injection de requ\u00eates ill\u00e9gitimes par rebond (CSRF)"
    },
    {
      "description": "Ex\u00e9cution de code arbitraire \u00e0 distance"
    },
    {
      "description": "Contournement de la politique de s\u00e9curit\u00e9"
    },
    {
      "description": "Atteinte \u00e0 la confidentialit\u00e9 des donn\u00e9es"
    },
    {
      "description": "\u00c9l\u00e9vation de privil\u00e8ges"
    }
  ],
  "summary": "De multiples vuln\u00e9rabilit\u00e9s ont \u00e9t\u00e9 d\u00e9couvertes dans les produits Cisco. Certaines d\u0027entre elles permettent \u00e0 un attaquant de provoquer une ex\u00e9cution de code arbitraire \u00e0 distance, une \u00e9l\u00e9vation de privil\u00e8ges et un d\u00e9ni de service \u00e0 distance.",
  "title": "Multiples vuln\u00e9rabilit\u00e9s dans les produits Cisco",
  "vendor_advisories": [
    {
      "published_at": "2024-10-16",
      "title": "Bulletin de s\u00e9curit\u00e9 Cisco cisco-sa-ata19x-multi-RDTEqRsy",
      "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ata19x-multi-RDTEqRsy"
    }
  ]
}

{
  "$ref": "https://www.cert.ssi.gouv.fr/openapi.json",
  "affected_systems": [
    {
      "description": " ATA 191 Analog Telephone Adapter versions 12.0.x ant\u00e9rieures 12.0.2",
      "product": {
        "name": "N/A",
        "vendor": {
          "name": "Cisco",
          "scada": false
        }
      }
    },
    {
      "description": "ATA 191 and 192 Multiplatform Analog Telephone versions ant\u00e9rieures \u00e0 11.2.5",
      "product": {
        "name": "N/A",
        "vendor": {
          "name": "Cisco",
          "scada": false
        }
      }
    }
  ],
  "affected_systems_content": "",
  "content": "## Solutions\n\nSe r\u00e9f\u00e9rer au bulletin de s\u00e9curit\u00e9 de l\u0027\u00e9diteur pour l\u0027obtention des correctifs (cf. section Documentation).",
  "cves": [
    {
      "name": "CVE-2024-20463",
      "url": "https://www.cve.org/CVERecord?id=CVE-2024-20463"
    },
    {
      "name": "CVE-2024-20420",
      "url": "https://www.cve.org/CVERecord?id=CVE-2024-20420"
    },
    {
      "name": "CVE-2024-20460",
      "url": "https://www.cve.org/CVERecord?id=CVE-2024-20460"
    },
    {
      "name": "CVE-2024-20458",
      "url": "https://www.cve.org/CVERecord?id=CVE-2024-20458"
    },
    {
      "name": "CVE-2024-20461",
      "url": "https://www.cve.org/CVERecord?id=CVE-2024-20461"
    },
    {
      "name": "CVE-2024-20462",
      "url": "https://www.cve.org/CVERecord?id=CVE-2024-20462"
    },
    {
      "name": "CVE-2024-20459",
      "url": "https://www.cve.org/CVERecord?id=CVE-2024-20459"
    },
    {
      "name": "CVE-2024-20421",
      "url": "https://www.cve.org/CVERecord?id=CVE-2024-20421"
    }
  ],
  "links": [],
  "reference": "CERTFR-2024-AVI-0897",
  "revisions": [
    {
      "description": "Version initiale",
      "revision_date": "2024-10-17T00:00:00.000000"
    }
  ],
  "risks": [
    {
      "description": "D\u00e9ni de service \u00e0 distance"
    },
    {
      "description": "Injection de code indirecte \u00e0 distance (XSS)"
    },
    {
      "description": "Injection de requ\u00eates ill\u00e9gitimes par rebond (CSRF)"
    },
    {
      "description": "Ex\u00e9cution de code arbitraire \u00e0 distance"
    },
    {
      "description": "Contournement de la politique de s\u00e9curit\u00e9"
    },
    {
      "description": "Atteinte \u00e0 la confidentialit\u00e9 des donn\u00e9es"
    },
    {
      "description": "\u00c9l\u00e9vation de privil\u00e8ges"
    }
  ],
  "summary": "De multiples vuln\u00e9rabilit\u00e9s ont \u00e9t\u00e9 d\u00e9couvertes dans les produits Cisco. Certaines d\u0027entre elles permettent \u00e0 un attaquant de provoquer une ex\u00e9cution de code arbitraire \u00e0 distance, une \u00e9l\u00e9vation de privil\u00e8ges et un d\u00e9ni de service \u00e0 distance.",
  "title": "Multiples vuln\u00e9rabilit\u00e9s dans les produits Cisco",
  "vendor_advisories": [
    {
      "published_at": "2024-10-16",
      "title": "Bulletin de s\u00e9curit\u00e9 Cisco cisco-sa-ata19x-multi-RDTEqRsy",
      "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ata19x-multi-RDTEqRsy"
    }
  ]
}

{
  "GSD": {
    "alias": "CVE-2024-20463",
    "id": "GSD-2024-20463"
  },
  "gsd": {
    "metadata": {
      "exploitCode": "unknown",
      "remediation": "unknown",
      "reportConfidence": "confirmed",
      "type": "vulnerability"
    },
    "osvSchema": {
      "aliases": [
        "CVE-2024-20463"
      ],
      "id": "GSD-2024-20463",
      "modified": "2023-12-13T01:21:42.914589Z",
      "schema_version": "1.4.0"
    }
  },
  "namespaces": {
    "cve.org": {
      "CVE_data_meta": {
        "ASSIGNER": "cve@mitre.org",
        "ID": "CVE-2024-20463",
        "STATE": "RESERVED"
      },
      "data_format": "MITRE",
      "data_type": "CVE",
      "data_version": "4.0",
      "description": {
        "description_data": [
          {
            "lang": "eng",
            "value": "** RESERVED ** This candidate has been reserved by an organization or individual that will use it when announcing a new security problem. When the candidate has been publicized, the details for this candidate will be provided."
          }
        ]
      }
    }
  }
}

{
  "configurations": [
    {
      "nodes": [
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:cisco:ata_191_firmware:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "E464918E-6409-4ACC-B27A-ECD7A5A5ABF8",
              "versionEndExcluding": "12.0.2",
              "vulnerable": true
            }
          ],
          "negate": false,
          "operator": "OR"
        },
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:h:cisco:ata_191:-:*:*:*:on-premises:*:*:*",
              "matchCriteriaId": "2BBB1A29-ABF8-4F79-A436-A416FAF4E7A9",
              "vulnerable": false
            }
          ],
          "negate": false,
          "operator": "OR"
        }
      ],
      "operator": "AND"
    },
    {
      "nodes": [
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:cisco:ata_191_firmware:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "8FA479CC-10DC-4B3A-A869-7E0CCD02C959",
              "versionEndExcluding": "11.2.5",
              "vulnerable": true
            }
          ],
          "negate": false,
          "operator": "OR"
        },
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:h:cisco:ata_191:-:*:*:*:multiplatform:*:*:*",
              "matchCriteriaId": "B0C232BB-005C-4E04-9B99-2B01AC8E8BA1",
              "vulnerable": false
            }
          ],
          "negate": false,
          "operator": "OR"
        }
      ],
      "operator": "AND"
    },
    {
      "nodes": [
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:cisco:ata_192_firmware:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "7B66D888-565A-4EB1-B19B-594B302AAA72",
              "versionEndExcluding": "11.2.5",
              "vulnerable": true
            }
          ],
          "negate": false,
          "operator": "OR"
        },
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:h:cisco:ata_192:-:*:*:*:multiplatform:*:*:*",
              "matchCriteriaId": "00A3390F-594D-4DB2-96EC-04D0D73C9421",
              "vulnerable": false
            }
          ],
          "negate": false,
          "operator": "OR"
        }
      ],
      "operator": "AND"
    }
  ],
  "cveTags": [],
  "descriptions": [
    {
      "lang": "en",
      "value": "A vulnerability in the web-based management interface of Cisco ATA 190 Series Analog Telephone Adapter firmware could allow an unauthenticated, remote attacker to modify the configuration or reboot an affected device.\r\n\r\nThis vulnerability is due to the HTTP server allowing state changes in GET requests. An attacker could exploit this vulnerability by sending a malicious request to the web-based management interface on an affected device. A successful exploit could allow the attacker to make limited modifications to the configuration or reboot the device, resulting in a denial of service (DoS) condition.\u0026nbsp;"
    },
    {
      "lang": "es",
      "value": "Una vulnerabilidad en la interfaz de administraci\u00f3n basada en web del firmware del adaptador telef\u00f3nico anal\u00f3gico Cisco ATA 190 Series podr\u00eda permitir que un atacante remoto no autenticado modifique la configuraci\u00f3n o reinicie un dispositivo afectado. Esta vulnerabilidad se debe a que el servidor HTTP permite cambios de estado en las solicitudes GET. Un atacante podr\u00eda aprovechar esta vulnerabilidad enviando una solicitud maliciosa a la interfaz de administraci\u00f3n basada en web en un dispositivo afectado. Una explotaci\u00f3n exitosa podr\u00eda permitir al atacante realizar modificaciones limitadas a la configuraci\u00f3n o reiniciar el dispositivo, lo que resultar\u00eda en una condici\u00f3n de denegaci\u00f3n de servicio (DoS)."
    }
  ],
  "id": "CVE-2024-20463",
  "lastModified": "2024-10-31T13:35:02.373",
  "metrics": {
    "cvssMetricV31": [
      {
        "cvssData": {
          "attackComplexity": "LOW",
          "attackVector": "NETWORK",
          "availabilityImpact": "LOW",
          "baseScore": 5.4,
          "baseSeverity": "MEDIUM",
          "confidentialityImpact": "NONE",
          "integrityImpact": "LOW",
          "privilegesRequired": "NONE",
          "scope": "UNCHANGED",
          "userInteraction": "REQUIRED",
          "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:L/A:L",
          "version": "3.1"
        },
        "exploitabilityScore": 2.8,
        "impactScore": 2.5,
        "source": "psirt@cisco.com",
        "type": "Secondary"
      },
      {
        "cvssData": {
          "attackComplexity": "LOW",
          "attackVector": "NETWORK",
          "availabilityImpact": "HIGH",
          "baseScore": 7.1,
          "baseSeverity": "HIGH",
          "confidentialityImpact": "NONE",
          "integrityImpact": "LOW",
          "privilegesRequired": "NONE",
          "scope": "UNCHANGED",
          "userInteraction": "REQUIRED",
          "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:L/A:H",
          "version": "3.1"
        },
        "exploitabilityScore": 2.8,
        "impactScore": 4.2,
        "source": "nvd@nist.gov",
        "type": "Primary"
      }
    ]
  },
  "published": "2024-10-16T17:15:15.670",
  "references": [
    {
      "source": "psirt@cisco.com",
      "tags": [
        "Vendor Advisory"
      ],
      "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ata19x-multi-RDTEqRsy"
    }
  ],
  "sourceIdentifier": "psirt@cisco.com",
  "vulnStatus": "Modified",
  "weaknesses": [
    {
      "description": [
        {
          "lang": "en",
          "value": "CWE-305"
        }
      ],
      "source": "psirt@cisco.com",
      "type": "Secondary"
    },
    {
      "description": [
        {
          "lang": "en",
          "value": "NVD-CWE-Other"
        }
      ],
      "source": "nvd@nist.gov",
      "type": "Primary"
    },
    {
      "description": [
        {
          "lang": "en",
          "value": "CWE-862"
        }
      ],
      "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
      "type": "Secondary"
    }
  ]
}

{
  "document": {
    "aggregate_severity": {
      "text": "hoch"
    },
    "category": "csaf_base",
    "csaf_version": "2.0",
    "distribution": {
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "de-DE",
    "notes": [
      {
        "category": "legal_disclaimer",
        "text": "Das BSI ist als Anbieter f\u00fcr die eigenen, zur Nutzung bereitgestellten Inhalte nach den allgemeinen Gesetzen verantwortlich. Nutzerinnen und Nutzer sind jedoch daf\u00fcr verantwortlich, die Verwendung und/oder die Umsetzung der mit den Inhalten bereitgestellten Informationen sorgf\u00e4ltig im Einzelfall zu pr\u00fcfen."
      },
      {
        "category": "description",
        "text": "Der Cisco Analog Telephone Adapter ist ein Handset-to-Ethernet-Adapter, der herk\u00f6mmliche Telefonger\u00e4te in IP-Ger\u00e4te verwandelt.",
        "title": "Produktbeschreibung"
      },
      {
        "category": "summary",
        "text": "Ein Angreifer kann mehrere Schwachstellen im Cisco Analog Telephone Adaptor ATA 191 und ATA 192  ausnutzen, um seine Privilegien zu erh\u00f6hen, beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Cross-Site-Scripting-Angriff durchzuf\u00fchren oder einen Denial-of-Service-Zustand zu erzeugen.",
        "title": "Angriff"
      },
      {
        "category": "general",
        "text": "- CISCO Appliance",
        "title": "Betroffene Betriebssysteme"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "csaf-provider@cert-bund.de",
      "name": "Bundesamt f\u00fcr Sicherheit in der Informationstechnik",
      "namespace": "https://www.bsi.bund.de"
    },
    "references": [
      {
        "category": "self",
        "summary": "WID-SEC-W-2024-3223 - CSAF Version",
        "url": "https://wid.cert-bund.de/.well-known/csaf/white/2024/wid-sec-w-2024-3223.json"
      },
      {
        "category": "self",
        "summary": "WID-SEC-2024-3223 - Portal Version",
        "url": "https://wid.cert-bund.de/portal/wid/securityadvisory?name=WID-SEC-2024-3223"
      },
      {
        "category": "external",
        "summary": "Cisco Security Advisories vom 2024-10-16",
        "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ata19x-multi-RDTEqRsy"
      }
    ],
    "source_lang": "en-US",
    "title": "Cisco Analog Telephone Adaptor (ATA): Mehrere Schwachstellen",
    "tracking": {
      "current_release_date": "2024-10-17T22:00:00.000+00:00",
      "generator": {
        "date": "2024-10-18T10:13:25.286+00:00",
        "engine": {
          "name": "BSI-WID",
          "version": "1.3.8"
        }
      },
      "id": "WID-SEC-W-2024-3223",
      "initial_release_date": "2024-10-16T22:00:00.000+00:00",
      "revision_history": [
        {
          "date": "2024-10-16T22:00:00.000+00:00",
          "number": "1",
          "summary": "Initiale Fassung"
        },
        {
          "date": "2024-10-17T22:00:00.000+00:00",
          "number": "2",
          "summary": "Anpassung im Text"
        }
      ],
      "status": "final",
      "version": "2"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003c11.2.5",
                "product": {
                  "name": "Cisco Analog Telephone Adaptor (ATA) \u003c11.2.5",
                  "product_id": "T038483"
                }
              },
              {
                "category": "product_version",
                "name": "11.2.5",
                "product": {
                  "name": "Cisco Analog Telephone Adaptor (ATA) 11.2.5",
                  "product_id": "T038483-fixed",
                  "product_identification_helper": {
                    "cpe": "cpe:/h:cisco:ata:11.2.5"
                  }
                }
              },
              {
                "category": "product_version_range",
                "name": "\u003c12.0.2",
                "product": {
                  "name": "Cisco Analog Telephone Adaptor (ATA) \u003c12.0.2",
                  "product_id": "T038484"
                }
              },
              {
                "category": "product_version",
                "name": "12.0.2",
                "product": {
                  "name": "Cisco Analog Telephone Adaptor (ATA) 12.0.2",
                  "product_id": "T038484-fixed",
                  "product_identification_helper": {
                    "cpe": "cpe:/h:cisco:ata:12.0.2"
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "Analog Telephone Adaptor (ATA)"
          }
        ],
        "category": "vendor",
        "name": "Cisco"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2024-20420",
      "notes": [
        {
          "category": "description",
          "text": "Es bestehen mehrere Schwachstellen im Cisco Analog Telephone Adaptor ATA 191 und ATA 192. Diese Fehler existieren wegen unzureichender Validierung, Authentifizierung und Eingabensanierung in verschiedenen Komponenten, die nicht autorisierte Aktionen erm\u00f6glichen. Ein entfernter oder lokaler, authentifizierter oder nicht authentifizierter Angreifer kann diese Schwachstellen ausnutzen, um Auswirkungen wie Remotecodeausf\u00fchrung, Privilegienerweiterung, Befehlsinjektion, Cross-Site Request Forgery (CSRF), Offenlegung von Informationen und Denial-of-Service (DoS) zu erzeugen oder um einen Cross-Site-Scripting-Angriff durchzuf\u00fchren. F\u00fcr einige dieser Schwachstellen ist eine Benutzerinteraktion erforderlich, um sie erfolgreich auszunutzen."
        }
      ],
      "product_status": {
        "known_affected": [
          "T038483",
          "T038484"
        ]
      },
      "release_date": "2024-10-16T22:00:00.000+00:00",
      "title": "CVE-2024-20420"
    },
    {
      "cve": "CVE-2024-20421",
      "notes": [
        {
          "category": "description",
          "text": "Es bestehen mehrere Schwachstellen im Cisco Analog Telephone Adaptor ATA 191 und ATA 192. Diese Fehler existieren wegen unzureichender Validierung, Authentifizierung und Eingabensanierung in verschiedenen Komponenten, die nicht autorisierte Aktionen erm\u00f6glichen. Ein entfernter oder lokaler, authentifizierter oder nicht authentifizierter Angreifer kann diese Schwachstellen ausnutzen, um Auswirkungen wie Remotecodeausf\u00fchrung, Privilegienerweiterung, Befehlsinjektion, Cross-Site Request Forgery (CSRF), Offenlegung von Informationen und Denial-of-Service (DoS) zu erzeugen oder um einen Cross-Site-Scripting-Angriff durchzuf\u00fchren. F\u00fcr einige dieser Schwachstellen ist eine Benutzerinteraktion erforderlich, um sie erfolgreich auszunutzen."
        }
      ],
      "product_status": {
        "known_affected": [
          "T038483",
          "T038484"
        ]
      },
      "release_date": "2024-10-16T22:00:00.000+00:00",
      "title": "CVE-2024-20421"
    },
    {
      "cve": "CVE-2024-20458",
      "notes": [
        {
          "category": "description",
          "text": "Es bestehen mehrere Schwachstellen im Cisco Analog Telephone Adaptor ATA 191 und ATA 192. Diese Fehler existieren wegen unzureichender Validierung, Authentifizierung und Eingabensanierung in verschiedenen Komponenten, die nicht autorisierte Aktionen erm\u00f6glichen. Ein entfernter oder lokaler, authentifizierter oder nicht authentifizierter Angreifer kann diese Schwachstellen ausnutzen, um Auswirkungen wie Remotecodeausf\u00fchrung, Privilegienerweiterung, Befehlsinjektion, Cross-Site Request Forgery (CSRF), Offenlegung von Informationen und Denial-of-Service (DoS) zu erzeugen oder um einen Cross-Site-Scripting-Angriff durchzuf\u00fchren. F\u00fcr einige dieser Schwachstellen ist eine Benutzerinteraktion erforderlich, um sie erfolgreich auszunutzen."
        }
      ],
      "product_status": {
        "known_affected": [
          "T038483",
          "T038484"
        ]
      },
      "release_date": "2024-10-16T22:00:00.000+00:00",
      "title": "CVE-2024-20458"
    },
    {
      "cve": "CVE-2024-20459",
      "notes": [
        {
          "category": "description",
          "text": "Es bestehen mehrere Schwachstellen im Cisco Analog Telephone Adaptor ATA 191 und ATA 192. Diese Fehler existieren wegen unzureichender Validierung, Authentifizierung und Eingabensanierung in verschiedenen Komponenten, die nicht autorisierte Aktionen erm\u00f6glichen. Ein entfernter oder lokaler, authentifizierter oder nicht authentifizierter Angreifer kann diese Schwachstellen ausnutzen, um Auswirkungen wie Remotecodeausf\u00fchrung, Privilegienerweiterung, Befehlsinjektion, Cross-Site Request Forgery (CSRF), Offenlegung von Informationen und Denial-of-Service (DoS) zu erzeugen oder um einen Cross-Site-Scripting-Angriff durchzuf\u00fchren. F\u00fcr einige dieser Schwachstellen ist eine Benutzerinteraktion erforderlich, um sie erfolgreich auszunutzen."
        }
      ],
      "product_status": {
        "known_affected": [
          "T038483",
          "T038484"
        ]
      },
      "release_date": "2024-10-16T22:00:00.000+00:00",
      "title": "CVE-2024-20459"
    },
    {
      "cve": "CVE-2024-20460",
      "notes": [
        {
          "category": "description",
          "text": "Es bestehen mehrere Schwachstellen im Cisco Analog Telephone Adaptor ATA 191 und ATA 192. Diese Fehler existieren wegen unzureichender Validierung, Authentifizierung und Eingabensanierung in verschiedenen Komponenten, die nicht autorisierte Aktionen erm\u00f6glichen. Ein entfernter oder lokaler, authentifizierter oder nicht authentifizierter Angreifer kann diese Schwachstellen ausnutzen, um Auswirkungen wie Remotecodeausf\u00fchrung, Privilegienerweiterung, Befehlsinjektion, Cross-Site Request Forgery (CSRF), Offenlegung von Informationen und Denial-of-Service (DoS) zu erzeugen oder um einen Cross-Site-Scripting-Angriff durchzuf\u00fchren. F\u00fcr einige dieser Schwachstellen ist eine Benutzerinteraktion erforderlich, um sie erfolgreich auszunutzen."
        }
      ],
      "product_status": {
        "known_affected": [
          "T038483",
          "T038484"
        ]
      },
      "release_date": "2024-10-16T22:00:00.000+00:00",
      "title": "CVE-2024-20460"
    },
    {
      "cve": "CVE-2024-20461",
      "notes": [
        {
          "category": "description",
          "text": "Es bestehen mehrere Schwachstellen im Cisco Analog Telephone Adaptor ATA 191 und ATA 192. Diese Fehler existieren wegen unzureichender Validierung, Authentifizierung und Eingabensanierung in verschiedenen Komponenten, die nicht autorisierte Aktionen erm\u00f6glichen. Ein entfernter oder lokaler, authentifizierter oder nicht authentifizierter Angreifer kann diese Schwachstellen ausnutzen, um Auswirkungen wie Remotecodeausf\u00fchrung, Privilegienerweiterung, Befehlsinjektion, Cross-Site Request Forgery (CSRF), Offenlegung von Informationen und Denial-of-Service (DoS) zu erzeugen oder um einen Cross-Site-Scripting-Angriff durchzuf\u00fchren. F\u00fcr einige dieser Schwachstellen ist eine Benutzerinteraktion erforderlich, um sie erfolgreich auszunutzen."
        }
      ],
      "product_status": {
        "known_affected": [
          "T038483",
          "T038484"
        ]
      },
      "release_date": "2024-10-16T22:00:00.000+00:00",
      "title": "CVE-2024-20461"
    },
    {
      "cve": "CVE-2024-20462",
      "notes": [
        {
          "category": "description",
          "text": "Es bestehen mehrere Schwachstellen im Cisco Analog Telephone Adaptor ATA 191 und ATA 192. Diese Fehler existieren wegen unzureichender Validierung, Authentifizierung und Eingabensanierung in verschiedenen Komponenten, die nicht autorisierte Aktionen erm\u00f6glichen. Ein entfernter oder lokaler, authentifizierter oder nicht authentifizierter Angreifer kann diese Schwachstellen ausnutzen, um Auswirkungen wie Remotecodeausf\u00fchrung, Privilegienerweiterung, Befehlsinjektion, Cross-Site Request Forgery (CSRF), Offenlegung von Informationen und Denial-of-Service (DoS) zu erzeugen oder um einen Cross-Site-Scripting-Angriff durchzuf\u00fchren. F\u00fcr einige dieser Schwachstellen ist eine Benutzerinteraktion erforderlich, um sie erfolgreich auszunutzen."
        }
      ],
      "product_status": {
        "known_affected": [
          "T038483",
          "T038484"
        ]
      },
      "release_date": "2024-10-16T22:00:00.000+00:00",
      "title": "CVE-2024-20462"
    },
    {
      "cve": "CVE-2024-20463",
      "notes": [
        {
          "category": "description",
          "text": "Es bestehen mehrere Schwachstellen im Cisco Analog Telephone Adaptor ATA 191 und ATA 192. Diese Fehler existieren wegen unzureichender Validierung, Authentifizierung und Eingabensanierung in verschiedenen Komponenten, die nicht autorisierte Aktionen erm\u00f6glichen. Ein entfernter oder lokaler, authentifizierter oder nicht authentifizierter Angreifer kann diese Schwachstellen ausnutzen, um Auswirkungen wie Remotecodeausf\u00fchrung, Privilegienerweiterung, Befehlsinjektion, Cross-Site Request Forgery (CSRF), Offenlegung von Informationen und Denial-of-Service (DoS) zu erzeugen oder um einen Cross-Site-Scripting-Angriff durchzuf\u00fchren. F\u00fcr einige dieser Schwachstellen ist eine Benutzerinteraktion erforderlich, um sie erfolgreich auszunutzen."
        }
      ],
      "product_status": {
        "known_affected": [
          "T038483",
          "T038484"
        ]
      },
      "release_date": "2024-10-16T22:00:00.000+00:00",
      "title": "CVE-2024-20463"
    }
  ]
}

{
  "affected": [],
  "aliases": [
    "CVE-2024-20463"
  ],
  "database_specific": {
    "cwe_ids": [
      "CWE-305",
      "CWE-862"
    ],
    "github_reviewed": false,
    "github_reviewed_at": null,
    "nvd_published_at": "2024-10-16T17:15:15Z",
    "severity": "MODERATE"
  },
  "details": "A vulnerability in the web-based management interface of Cisco ATA 190 Series Analog Telephone Adapter firmware could allow an unauthenticated, remote attacker to modify the configuration or reboot an affected device.\n\nThis vulnerability is due to the HTTP server allowing state changes in GET requests. An attacker could exploit this vulnerability by sending a malicious request to the web-based management interface on an affected device. A successful exploit could allow the attacker to make limited modifications to the configuration or reboot the device, resulting in a denial of service (DoS) condition.\u0026nbsp;",
  "id": "GHSA-8vcm-p6g6-xjqp",
  "modified": "2024-10-16T18:31:47Z",
  "published": "2024-10-16T18:31:47Z",
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2024-20463"
    },
    {
      "type": "WEB",
      "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ata19x-multi-RDTEqRsy"
    }
  ],
  "schema_version": "1.4.0",
  "severity": [
    {
      "score": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:L/A:L",
      "type": "CVSS_V3"
    }
  ]
}