GCVE Workshop - 22 September 2026 (14:00-18:00), Luxembourg Before The Vulnopticon Conference - Registration

CVE-2026-10674 (GCVE-0-2026-10674)

Vulnerability from cvelistv5 – Published: 2026-07-21 21:30 – Updated: 2026-07-22 19:37
VLAI
Title
DoS (hard fault) in NXP LPUART driver: unsupported runtime UART config leaves clocks disabled
Summary
The NXP LPUART serial driver (drivers/serial/uart_mcux_lpuart.c), when CONFIG_UART_USE_RUNTIME_CONFIGURE is enabled, called LPUART_Deinit() at the start of mcux_lpuart_configure(), which disables the LPUART peripheral clocks. The requested configuration is validated only afterwards (in mcux_lpuart_configure_basic), and unsupported parity/data-bit/stop-bit/flow-control values return -ENOTSUP before the clock is re-enabled. As a result, a uart_configure() request with an unsupported configuration left the LPUART in a clock-disabled state; any subsequent access to LPUART registers (poll_out/poll_in, interrupt handling, or a later reconfigure) faults on the gated peripheral and escalates to a hard fault, crashing the system. uart_configure() is a Zephyr syscall whose verifier (z_vrfy_uart_configure) only checks that cfg is readable user memory and forwards the caller-supplied configuration unchanged, so an unprivileged userspace thread with access to an LPUART device can deterministically trigger the fault, a persistent system-wide denial of service. Introduced in v2.5.0 and present in all subsequent releases until this fix, which removes the LPUART_Deinit() call and instead only disables the transmitter/receiver, leaving the clock running.
Severity
5.5 (Medium)
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
SSVC
Exploitation: none Automatable: no Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-07-22 19:32 UTC
CWE
Assigner
References
Impacted products
Vendor Product Version CPE status
zephyrproject zephyr Affected: 3.7.0 , < 4.5.0 (semver)
guessed Create a notification for this product.
Show details on NVD website
To clipboard 

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-10674",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-07-22T19:32:08.144813Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-07-22T19:37:08.367Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
          "defaultStatus": "unaffected",
          "packageName": "zephyr",
          "product": "zephyr",
          "programFiles": [
            "drivers/serial/uart_mcux_lpuart.c"
          ],
          "vendor": "zephyrproject",
          "versions": [
            {
              "lessThan": "4.5.0",
              "status": "affected",
              "version": "3.7.0",
              "versionType": "semver"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "The NXP LPUART serial driver (drivers/serial/uart_mcux_lpuart.c), when CONFIG_UART_USE_RUNTIME_CONFIGURE is enabled, called LPUART_Deinit() at the start of mcux_lpuart_configure(), which disables the LPUART peripheral clocks. The requested configuration is validated only afterwards (in mcux_lpuart_configure_basic), and unsupported parity/data-bit/stop-bit/flow-control values return -ENOTSUP before the clock is re-enabled.\n\nAs a result, a uart_configure() request with an unsupported configuration left the LPUART in a clock-disabled state; any subsequent access to LPUART registers (poll_out/poll_in, interrupt handling, or a later reconfigure) faults on the gated peripheral and escalates to a hard fault, crashing the system.\n\nuart_configure() is a Zephyr syscall whose verifier (z_vrfy_uart_configure) only checks that cfg is readable user memory and forwards the caller-supplied configuration unchanged, so an unprivileged userspace thread with access to an LPUART device can deterministically trigger the fault, a persistent system-wide denial of service.\n\nIntroduced in v2.5.0 and present in all subsequent releases until this fix, which removes the LPUART_Deinit() call and instead only disables the transmitter/receiver, leaving the clock running."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "format": "CVSS"
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-617",
              "description": "dos",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-07-21T21:30:53.643Z",
        "orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
        "shortName": "zephyr"
      },
      "references": [
        {
          "name": "Fix commit",
          "tags": [
            "patch"
          ],
          "url": "https://github.com/zephyrproject-rtos/zephyr/commit/f56935c46fdf6559a20ad8484b29896ecac5808f"
        },
        {
          "name": "GHSA-mw68-r353-m3vf",
          "url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-mw68-r353-m3vf"
        }
      ],
      "title": "DoS (hard fault) in NXP LPUART driver: unsupported runtime UART config leaves clocks disabled",
      "x_generator": {
        "engine": "cvelib 1.8.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
    "assignerShortName": "zephyr",
    "cveId": "CVE-2026-10674",
    "datePublished": "2026-07-21T21:30:53.643Z",
    "dateReserved": "2026-06-02T15:26:03.742Z",
    "dateUpdated": "2026-07-22T19:37:08.367Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2",
  "vulnerability-lookup:meta": {
    "epss": {
      "cve": "CVE-2026-10674",
      "date": "2026-09-16",
      "epss": "0.00143",
      "percentile": "0.0396"
    },
    "nvd": "{\"cve\":{\"id\":\"CVE-2026-10674\",\"sourceIdentifier\":\"vulnerabilities@zephyrproject.org\",\"published\":\"2026-07-21T22:16:58.740\",\"lastModified\":\"2026-07-30T16:08:31.080\",\"vulnStatus\":\"Analyzed\",\"cveTags\":[],\"descriptions\":[{\"lang\":\"en\",\"value\":\"The NXP LPUART serial driver (drivers/serial/uart_mcux_lpuart.c), when CONFIG_UART_USE_RUNTIME_CONFIGURE is enabled, called LPUART_Deinit() at the start of mcux_lpuart_configure(), which disables the LPUART peripheral clocks. The requested configuration is validated only afterwards (in mcux_lpuart_configure_basic), and unsupported parity/data-bit/stop-bit/flow-control values return -ENOTSUP before the clock is re-enabled.\\n\\nAs a result, a uart_configure() request with an unsupported configuration left the LPUART in a clock-disabled state; any subsequent access to LPUART registers (poll_out/poll_in, interrupt handling, or a later reconfigure) faults on the gated peripheral and escalates to a hard fault, crashing the system.\\n\\nuart_configure() is a Zephyr syscall whose verifier (z_vrfy_uart_configure) only checks that cfg is readable user memory and forwards the caller-supplied configuration unchanged, so an unprivileged userspace thread with access to an LPUART device can deterministically trigger the fault, a persistent system-wide denial of service.\\n\\nIntroduced in v2.5.0 and present in all subsequent releases until this fix, which removes the LPUART_Deinit() call and instead only disables the transmitter/receiver, leaving the clock running.\"}],\"affected\":[{\"source\":\"vulnerabilities@zephyrproject.org\",\"affectedData\":[{\"vendor\":\"zephyrproject\",\"product\":\"zephyr\",\"defaultStatus\":\"unaffected\",\"collectionURL\":\"https://github.com/zephyrproject-rtos/zephyr\",\"packageName\":\"zephyr\",\"programFiles\":[\"drivers/serial/uart_mcux_lpuart.c\"],\"versions\":[{\"version\":\"3.7.0\",\"lessThan\":\"4.5.0\",\"versionType\":\"semver\",\"status\":\"affected\"}]}]}],\"metrics\":{\"cvssMetricV31\":[{\"source\":\"vulnerabilities@zephyrproject.org\",\"type\":\"Secondary\",\"cvssData\":{\"version\":\"3.1\",\"vectorString\":\"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H\",\"baseScore\":5.5,\"baseSeverity\":\"MEDIUM\",\"attackVector\":\"LOCAL\",\"attackComplexity\":\"LOW\",\"privilegesRequired\":\"LOW\",\"userInteraction\":\"NONE\",\"scope\":\"UNCHANGED\",\"confidentialityImpact\":\"NONE\",\"integrityImpact\":\"NONE\",\"availabilityImpact\":\"HIGH\"},\"exploitabilityScore\":1.8,\"impactScore\":3.6}],\"ssvcV203\":[{\"source\":\"134c704f-9b21-4f2e-91b3-4a467353bcc0\",\"ssvcData\":{\"timestamp\":\"2026-07-22T19:32:08.144813Z\",\"id\":\"CVE-2026-10674\",\"options\":[{\"exploitation\":\"none\"},{\"automatable\":\"no\"},{\"technicalImpact\":\"partial\"}],\"role\":\"CISA Coordinator\",\"version\":\"2.0.3\"}}]},\"weaknesses\":[{\"source\":\"vulnerabilities@zephyrproject.org\",\"type\":\"Secondary\",\"description\":[{\"lang\":\"en\",\"value\":\"CWE-617\"}]}],\"configurations\":[{\"nodes\":[{\"operator\":\"OR\",\"negate\":false,\"cpeMatch\":[{\"vulnerable\":true,\"criteria\":\"cpe:2.3:o:zephyrproject:zephyr:*:*:*:*:*:*:*:*\",\"versionStartIncluding\":\"2.5.0\",\"versionEndIncluding\":\"4.4.1\",\"matchCriteriaId\":\"E03F3A48-9F88-412D-B4A0-2156F391EA7B\"}]}]}],\"references\":[{\"url\":\"https://github.com/zephyrproject-rtos/zephyr/commit/f56935c46fdf6559a20ad8484b29896ecac5808f\",\"source\":\"vulnerabilities@zephyrproject.org\",\"tags\":[\"Patch\"]},{\"url\":\"https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-mw68-r353-m3vf\",\"source\":\"vulnerabilities@zephyrproject.org\",\"tags\":[\"Patch\",\"Vendor Advisory\"]}]}}",
    "vulnrichment": {
      "containers": "{\"adp\": [{\"title\": \"CISA ADP Vulnrichment\", \"metrics\": [{\"other\": {\"type\": \"ssvc\", \"content\": {\"id\": \"CVE-2026-10674\", \"role\": \"CISA Coordinator\", \"options\": [{\"Exploitation\": \"none\"}, {\"Automatable\": \"no\"}, {\"Technical Impact\": \"partial\"}], \"version\": \"2.0.3\", \"timestamp\": \"2026-07-22T19:32:08.144813Z\"}}}], \"providerMetadata\": {\"orgId\": \"134c704f-9b21-4f2e-91b3-4a467353bcc0\", \"shortName\": \"CISA-ADP\", \"dateUpdated\": \"2026-07-22T19:32:09.531Z\"}}], \"cna\": {\"title\": \"DoS (hard fault) in NXP LPUART driver: unsupported runtime UART config leaves clocks disabled\", \"metrics\": [{\"format\": \"CVSS\", \"cvssV3_1\": {\"version\": \"3.1\", \"baseScore\": 5.5, \"baseSeverity\": \"MEDIUM\", \"vectorString\": \"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H\"}}], \"affected\": [{\"vendor\": \"zephyrproject\", \"product\": \"zephyr\", \"versions\": [{\"status\": \"affected\", \"version\": \"3.7.0\", \"lessThan\": \"4.5.0\", \"versionType\": \"semver\"}], \"packageName\": \"zephyr\", \"programFiles\": [\"drivers/serial/uart_mcux_lpuart.c\"], \"collectionURL\": \"https://github.com/zephyrproject-rtos/zephyr\", \"defaultStatus\": \"unaffected\"}], \"references\": [{\"url\": \"https://github.com/zephyrproject-rtos/zephyr/commit/f56935c46fdf6559a20ad8484b29896ecac5808f\", \"name\": \"Fix commit\", \"tags\": [\"patch\"]}, {\"url\": \"https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-mw68-r353-m3vf\", \"name\": \"GHSA-mw68-r353-m3vf\"}], \"x_generator\": {\"engine\": \"cvelib 1.8.0\"}, \"descriptions\": [{\"lang\": \"en\", \"value\": \"The NXP LPUART serial driver (drivers/serial/uart_mcux_lpuart.c), when CONFIG_UART_USE_RUNTIME_CONFIGURE is enabled, called LPUART_Deinit() at the start of mcux_lpuart_configure(), which disables the LPUART peripheral clocks. The requested configuration is validated only afterwards (in mcux_lpuart_configure_basic), and unsupported parity/data-bit/stop-bit/flow-control values return -ENOTSUP before the clock is re-enabled.\\n\\nAs a result, a uart_configure() request with an unsupported configuration left the LPUART in a clock-disabled state; any subsequent access to LPUART registers (poll_out/poll_in, interrupt handling, or a later reconfigure) faults on the gated peripheral and escalates to a hard fault, crashing the system.\\n\\nuart_configure() is a Zephyr syscall whose verifier (z_vrfy_uart_configure) only checks that cfg is readable user memory and forwards the caller-supplied configuration unchanged, so an unprivileged userspace thread with access to an LPUART device can deterministically trigger the fault, a persistent system-wide denial of service.\\n\\nIntroduced in v2.5.0 and present in all subsequent releases until this fix, which removes the LPUART_Deinit() call and instead only disables the transmitter/receiver, leaving the clock running.\"}], \"problemTypes\": [{\"descriptions\": [{\"lang\": \"en\", \"type\": \"CWE\", \"cweId\": \"CWE-617\", \"description\": \"dos\"}]}], \"providerMetadata\": {\"orgId\": \"e2e69745-5e70-4e92-8431-deb5529a81ad\", \"shortName\": \"zephyr\", \"dateUpdated\": \"2026-07-21T21:30:53.643Z\"}}}",
      "cveMetadata": "{\"cveId\": \"CVE-2026-10674\", \"state\": \"PUBLISHED\", \"dateUpdated\": \"2026-07-22T19:37:08.367Z\", \"dateReserved\": \"2026-06-02T15:26:03.742Z\", \"assignerOrgId\": \"e2e69745-5e70-4e92-8431-deb5529a81ad\", \"datePublished\": \"2026-07-21T21:30:53.643Z\", \"assignerShortName\": \"zephyr\"}",
      "dataType": "CVE_RECORD",
      "dataVersion": "5.2"
    }
  }
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.





Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.


Detection rules are retrieved from Rulezet.


Related by attack behaviour

Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.