CVE-2026-53081 (GCVE-0-2026-53081)

Vulnerability from cvelistv5 – Published: 2026-06-24 16:30 – Updated: 2026-08-05 12:33
VLAI
Title
bpf: Enforce regsafe base id consistency for BPF_ADD_CONST scalars
Summary
In the Linux kernel, the following vulnerability has been resolved: bpf: Enforce regsafe base id consistency for BPF_ADD_CONST scalars When regsafe() compares two scalar registers that both carry BPF_ADD_CONST, check_scalar_ids() maps their full compound id (aka base | BPF_ADD_CONST flag) as one idmap entry. However, it never verifies that the underlying base ids, that is, with the flag stripped are consistent with existing idmap mappings. This allows construction of two verifier states where the old state has R3 = R2 + 10 (both sharing base id A) while the current state has R3 = R4 + 10 (base id C, unrelated to R2). The idmap creates two independent entries: A->B (for R2) and A|flag->C|flag (for R3), without catching that A->C conflicts with A->B. State pruning then incorrectly succeeds. Fix this by additionally verifying base ID mapping consistency whenever BPF_ADD_CONST is set: after mapping the compound ids, also invoke check_ids() on the base IDs (flag bits stripped). This ensures that if A was already mapped to B from comparing the source register, any ADD_CONST derivative must also derive from B, not an unrelated C.
Severity
7.8 (High)
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
6.4 (Medium)
CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H
CWE
  • CWE-386 - Symbolic Name not Mapping to Correct Object
Assigner
References
Impacted products
Vendor Product Version
Linux Linux Affected: 98d7ca374ba4b39e7535613d40e159f09ca14da2 , < 13c02881e49aac4c82b261faa26db9edf2567231 (git)
Affected: 98d7ca374ba4b39e7535613d40e159f09ca14da2 , < 691adf738817275368ed56311b7d798d617823a3 (git)
Affected: 98d7ca374ba4b39e7535613d40e159f09ca14da2 , < 7d73c72cccac651acc891377a5e623e4021c6380 (git)
Affected: 98d7ca374ba4b39e7535613d40e159f09ca14da2 , < 2f2ec8e7730e21fc9bd49e0de9cdd58213ea24d0 (git)
Create a notification for this product.
Linux Linux Affected: 6.11
Unaffected: 0 , < 6.11 (semver)
Unaffected: 6.12.91 , ≤ 6.12.* (semver)
Unaffected: 6.18.33 , ≤ 6.18.* (semver)
Unaffected: 7.0.10 , ≤ 7.0.* (semver)
Unaffected: 7.1 , ≤ * (original_commit_for_fix)
Create a notification for this product.
Red Hat Red Hat Enterprise Linux 10     cpe:/o:redhat:enterprise_linux:10
 Create a notification for this product.
Red Hat Red Hat Enterprise Linux 6     cpe:/o:redhat:enterprise_linux:6
 Create a notification for this product.
Red Hat Red Hat Enterprise Linux 7     cpe:/o:redhat:enterprise_linux:7
 Create a notification for this product.
Red Hat Red Hat Enterprise Linux 8     cpe:/o:redhat:enterprise_linux:8
 Create a notification for this product.
Red Hat Red Hat Enterprise Linux 9     cpe:/o:redhat:enterprise_linux:9
 Create a notification for this product.
Show details on NVD website
To clipboard 

{
  "containers": {
    "adp": [
      {
        "affected": [
          {
            "collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
            "cpes": [
              "cpe:/o:redhat:enterprise_linux:10"
            ],
            "defaultStatus": "affected",
            "packageName": "kernel",
            "product": "Red Hat Enterprise Linux 10",
            "vendor": "Red Hat"
          },
          {
            "collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
            "cpes": [
              "cpe:/o:redhat:enterprise_linux:6"
            ],
            "defaultStatus": "unaffected",
            "packageName": "kernel",
            "product": "Red Hat Enterprise Linux 6",
            "vendor": "Red Hat"
          },
          {
            "collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
            "cpes": [
              "cpe:/o:redhat:enterprise_linux:7"
            ],
            "defaultStatus": "unaffected",
            "packageName": "kernel",
            "product": "Red Hat Enterprise Linux 7",
            "vendor": "Red Hat"
          },
          {
            "collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
            "cpes": [
              "cpe:/o:redhat:enterprise_linux:7"
            ],
            "defaultStatus": "unaffected",
            "packageName": "kernel-rt",
            "product": "Red Hat Enterprise Linux 7",
            "vendor": "Red Hat"
          },
          {
            "collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
            "cpes": [
              "cpe:/o:redhat:enterprise_linux:8"
            ],
            "defaultStatus": "unaffected",
            "packageName": "kernel",
            "product": "Red Hat Enterprise Linux 8",
            "vendor": "Red Hat"
          },
          {
            "collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
            "cpes": [
              "cpe:/o:redhat:enterprise_linux:8"
            ],
            "defaultStatus": "unaffected",
            "packageName": "kernel-rt",
            "product": "Red Hat Enterprise Linux 8",
            "vendor": "Red Hat"
          },
          {
            "collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
            "cpes": [
              "cpe:/o:redhat:enterprise_linux:9"
            ],
            "defaultStatus": "affected",
            "packageName": "kernel",
            "product": "Red Hat Enterprise Linux 9",
            "vendor": "Red Hat"
          },
          {
            "collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
            "cpes": [
              "cpe:/o:redhat:enterprise_linux:9"
            ],
            "defaultStatus": "affected",
            "packageName": "kernel-rt",
            "product": "Red Hat Enterprise Linux 9",
            "vendor": "Red Hat"
          }
        ],
        "datePublic": "2026-06-24T00:00:00.000Z",
        "descriptions": [
          {
            "lang": "en",
            "value": "A flaw was found in the Linux kernel\u0027s Berkeley Packet Filter (BPF) verifier. This vulnerability occurs due to inconsistent base ID mapping when the `regsafe()` function compares scalar registers with `BPF_ADD_CONST` values. This inconsistency allows the BPF verifier to incorrectly succeed in state pruning, which could enable a bypass of its security mechanisms. Such a bypass may lead to unexpected system behavior or potentially allow an attacker to execute unauthorized operations."
          }
        ],
        "metrics": [
          {
            "other": {
              "content": {
                "namespace": "https://access.redhat.com/security/updates/classification/",
                "value": "Moderate"
              },
              "type": "Red Hat severity rating"
            }
          },
          {
            "cvssV3_1": {
              "attackComplexity": "HIGH",
              "attackVector": "LOCAL",
              "availabilityImpact": "HIGH",
              "baseScore": 6.4,
              "baseSeverity": "MEDIUM",
              "confidentialityImpact": "HIGH",
              "integrityImpact": "HIGH",
              "privilegesRequired": "HIGH",
              "scope": "UNCHANGED",
              "userInteraction": "NONE",
              "vectorString": "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H",
              "version": "3.1"
            },
            "format": "CVSS"
          }
        ],
        "problemTypes": [
          {
            "descriptions": [
              {
                "cweId": "CWE-386",
                "description": "Symbolic Name not Mapping to Correct Object",
                "lang": "en",
                "type": "CWE"
              }
            ]
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-07-15T00:45:06.204Z",
          "orgId": "0b0ca135-0b70-47e7-9f44-1890c2a1c46c",
          "shortName": "redhat-SADP"
        },
        "references": [
          {
            "tags": [
              "vdb-entry",
              "x_refsource_REDHAT"
            ],
            "url": "https://access.redhat.com/security/cve/CVE-2026-53081"
          },
          {
            "name": "RHBZ#2492322",
            "tags": [
              "issue-tracking",
              "x_refsource_REDHAT"
            ],
            "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2492322"
          },
          {
            "tags": [
              "x_sadp-csaf-vex"
            ],
            "url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-53081.json"
          }
        ],
        "timeline": [
          {
            "lang": "en",
            "time": "2026-06-24T00:00:00.000Z",
            "value": "Reported to Red Hat."
          },
          {
            "lang": "en",
            "time": "2026-06-24T00:00:00.000Z",
            "value": "Made public."
          }
        ],
        "title": "kernel: bpf: Enforce regsafe base id consistency for BPF_ADD_CONST scalars",
        "x_adpType": "supplier",
        "x_generator": {
          "engine": "sadp-cli 1.0.0"
        }
      }
    ],
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "kernel/bpf/verifier.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "13c02881e49aac4c82b261faa26db9edf2567231",
              "status": "affected",
              "version": "98d7ca374ba4b39e7535613d40e159f09ca14da2",
              "versionType": "git"
            },
            {
              "lessThan": "691adf738817275368ed56311b7d798d617823a3",
              "status": "affected",
              "version": "98d7ca374ba4b39e7535613d40e159f09ca14da2",
              "versionType": "git"
            },
            {
              "lessThan": "7d73c72cccac651acc891377a5e623e4021c6380",
              "status": "affected",
              "version": "98d7ca374ba4b39e7535613d40e159f09ca14da2",
              "versionType": "git"
            },
            {
              "lessThan": "2f2ec8e7730e21fc9bd49e0de9cdd58213ea24d0",
              "status": "affected",
              "version": "98d7ca374ba4b39e7535613d40e159f09ca14da2",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "kernel/bpf/verifier.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "6.11"
            },
            {
              "lessThan": "6.11",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.12.*",
              "status": "unaffected",
              "version": "6.12.91",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.18.*",
              "status": "unaffected",
              "version": "6.18.33",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "7.0.*",
              "status": "unaffected",
              "version": "7.0.10",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "7.1",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.12.91",
                  "versionStartIncluding": "6.11",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.18.33",
                  "versionStartIncluding": "6.11",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.0.10",
                  "versionStartIncluding": "6.11",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.1",
                  "versionStartIncluding": "6.11",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nbpf: Enforce regsafe base id consistency for BPF_ADD_CONST scalars\n\nWhen regsafe() compares two scalar registers that both carry\nBPF_ADD_CONST, check_scalar_ids() maps their full compound id\n(aka base | BPF_ADD_CONST flag) as one idmap entry. However,\nit never verifies that the underlying base ids, that is, with\nthe flag stripped are consistent with existing idmap mappings.\n\nThis allows construction of two verifier states where the old\nstate has R3 = R2 + 10 (both sharing base id A) while the current\nstate has R3 = R4 + 10 (base id C, unrelated to R2). The idmap\ncreates two independent entries: A-\u003eB (for R2) and A|flag-\u003eC|flag\n(for R3), without catching that A-\u003eC conflicts with A-\u003eB. State\npruning then incorrectly succeeds.\n\nFix this by additionally verifying base ID mapping consistency\nwhenever BPF_ADD_CONST is set: after mapping the compound ids,\nalso invoke check_ids() on the base IDs (flag bits stripped).\nThis ensures that if A was already mapped to B from comparing\nthe source register, any ADD_CONST derivative must also derive\nfrom B, not an unrelated C."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "scenarios": [
            {
              "lang": "en",
              "value": "AV:L - The vulnerable verifier path is reached by a local attacker through the bpf() syscall with BPF_PROG_LOAD, not by remote packets or adjacent/physical input. The crafted program then drives verifier state pruning into regsafe()/check_scalar_ids().\nAC:L - Exploitation depends on constructing specific BPF instructions and verifier states, but there is no race or external condition outside the attacker\u0027s control. The verifier behavior is deterministic once the crafted program is submitted.\nPR:L - The affected BPF_ADD_CONST tracking is gated on privileged BPF loading through CAP_BPF or an equivalent BPF token, but BPF tokens can delegate this capability into user namespaces in realistic containerized deployments. Under the required highest-severity reasonable scenario, this is low privilege rather than init-namespace root only.\nUI:N - No victim action is required; the attacker submits and executes the crafted BPF program directly through local kernel interfaces. Loading and triggering the program are attacker-controlled.\nS:U - The vulnerability is a kernel BPF verifier flaw that affects the same kernel security authority. It does not cross a separate scope such as guest-to-host or IOMMU isolation.\nC:H - An unsound verifier state-pruning decision can allow an unsafe BPF program to pass validation, enabling kernel memory reads through invalid bounds or scalar relationship assumptions. BPF verifier bypasses are generally exploitable for high-impact information disclosure.\nI:H - By accepting an unsafe BPF program, the verifier can permit memory accesses or control effects that should have been rejected, supporting arbitrary kernel memory modification or code execution. This is a high-integrity kernel compromise scenario.\nA:H - Even if not fully weaponized for read/write primitives, an unsafe accepted BPF program can crash or panic the kernel through invalid memory access. Kernel crash availability impact is high."
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-08-05T12:33:12.279Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/13c02881e49aac4c82b261faa26db9edf2567231"
        },
        {
          "url": "https://git.kernel.org/stable/c/691adf738817275368ed56311b7d798d617823a3"
        },
        {
          "url": "https://git.kernel.org/stable/c/7d73c72cccac651acc891377a5e623e4021c6380"
        },
        {
          "url": "https://git.kernel.org/stable/c/2f2ec8e7730e21fc9bd49e0de9cdd58213ea24d0"
        }
      ],
      "title": "bpf: Enforce regsafe base id consistency for BPF_ADD_CONST scalars",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2026-53081",
    "datePublished": "2026-06-24T16:30:21.959Z",
    "dateReserved": "2026-06-09T07:44:35.383Z",
    "dateUpdated": "2026-08-05T12:33:12.279Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2",
  "vulnerability-lookup:meta": {
    "epss": {
      "cve": "CVE-2026-53081",
      "date": "2026-08-05",
      "epss": "0.00122",
      "percentile": "0.02355"
    },
    "nvd": "{\"cve\":{\"id\":\"CVE-2026-53081\",\"sourceIdentifier\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\",\"published\":\"2026-06-24T17:17:22.233\",\"lastModified\":\"2026-07-23T18:37:50.980\",\"vulnStatus\":\"Analyzed\",\"cveTags\":[],\"descriptions\":[{\"lang\":\"en\",\"value\":\"In the Linux kernel, the following vulnerability has been resolved:\\n\\nbpf: Enforce regsafe base id consistency for BPF_ADD_CONST scalars\\n\\nWhen regsafe() compares two scalar registers that both carry\\nBPF_ADD_CONST, check_scalar_ids() maps their full compound id\\n(aka base | BPF_ADD_CONST flag) as one idmap entry. However,\\nit never verifies that the underlying base ids, that is, with\\nthe flag stripped are consistent with existing idmap mappings.\\n\\nThis allows construction of two verifier states where the old\\nstate has R3 = R2 + 10 (both sharing base id A) while the current\\nstate has R3 = R4 + 10 (base id C, unrelated to R2). The idmap\\ncreates two independent entries: A-\u003eB (for R2) and A|flag-\u003eC|flag\\n(for R3), without catching that A-\u003eC conflicts with A-\u003eB. State\\npruning then incorrectly succeeds.\\n\\nFix this by additionally verifying base ID mapping consistency\\nwhenever BPF_ADD_CONST is set: after mapping the compound ids,\\nalso invoke check_ids() on the base IDs (flag bits stripped).\\nThis ensures that if A was already mapped to B from comparing\\nthe source register, any ADD_CONST derivative must also derive\\nfrom B, not an unrelated C.\"}],\"affected\":[{\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\",\"affectedData\":[{\"vendor\":\"Linux\",\"product\":\"Linux\",\"defaultStatus\":\"unaffected\",\"programFiles\":[\"kernel/bpf/verifier.c\"],\"repo\":\"https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git\",\"versions\":[{\"version\":\"98d7ca374ba4b39e7535613d40e159f09ca14da2\",\"lessThan\":\"13c02881e49aac4c82b261faa26db9edf2567231\",\"versionType\":\"git\",\"status\":\"affected\"},{\"version\":\"98d7ca374ba4b39e7535613d40e159f09ca14da2\",\"lessThan\":\"691adf738817275368ed56311b7d798d617823a3\",\"versionType\":\"git\",\"status\":\"affected\"},{\"version\":\"98d7ca374ba4b39e7535613d40e159f09ca14da2\",\"lessThan\":\"7d73c72cccac651acc891377a5e623e4021c6380\",\"versionType\":\"git\",\"status\":\"affected\"},{\"version\":\"98d7ca374ba4b39e7535613d40e159f09ca14da2\",\"lessThan\":\"2f2ec8e7730e21fc9bd49e0de9cdd58213ea24d0\",\"versionType\":\"git\",\"status\":\"affected\"}]},{\"vendor\":\"Linux\",\"product\":\"Linux\",\"defaultStatus\":\"affected\",\"programFiles\":[\"kernel/bpf/verifier.c\"],\"repo\":\"https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git\",\"versions\":[{\"version\":\"6.11\",\"status\":\"affected\"},{\"version\":\"0\",\"lessThan\":\"6.11\",\"versionType\":\"semver\",\"status\":\"unaffected\"},{\"version\":\"6.12.91\",\"lessThanOrEqual\":\"6.12.*\",\"versionType\":\"semver\",\"status\":\"unaffected\"},{\"version\":\"6.18.33\",\"lessThanOrEqual\":\"6.18.*\",\"versionType\":\"semver\",\"status\":\"unaffected\"},{\"version\":\"7.0.10\",\"lessThanOrEqual\":\"7.0.*\",\"versionType\":\"semver\",\"status\":\"unaffected\"},{\"version\":\"7.1\",\"lessThanOrEqual\":\"*\",\"versionType\":\"original_commit_for_fix\",\"status\":\"unaffected\"}]}]},{\"source\":\"0b0ca135-0b70-47e7-9f44-1890c2a1c46c\",\"affectedData\":[{\"vendor\":\"Red Hat\",\"product\":\"Red Hat Enterprise Linux 10\",\"defaultStatus\":\"affected\",\"collectionURL\":\"https://access.redhat.com/downloads/content/package-browser/\",\"packageName\":\"kernel\",\"cpes\":[\"cpe:/o:redhat:enterprise_linux:10\"]},{\"vendor\":\"Red Hat\",\"product\":\"Red Hat Enterprise Linux 6\",\"defaultStatus\":\"unaffected\",\"collectionURL\":\"https://access.redhat.com/downloads/content/package-browser/\",\"packageName\":\"kernel\",\"cpes\":[\"cpe:/o:redhat:enterprise_linux:6\"]},{\"vendor\":\"Red Hat\",\"product\":\"Red Hat Enterprise Linux 7\",\"defaultStatus\":\"unaffected\",\"collectionURL\":\"https://access.redhat.com/downloads/content/package-browser/\",\"packageName\":\"kernel\",\"cpes\":[\"cpe:/o:redhat:enterprise_linux:7\"]},{\"vendor\":\"Red Hat\",\"product\":\"Red Hat Enterprise Linux 7\",\"defaultStatus\":\"unaffected\",\"collectionURL\":\"https://access.redhat.com/downloads/content/package-browser/\",\"packageName\":\"kernel-rt\",\"cpes\":[\"cpe:/o:redhat:enterprise_linux:7\"]},{\"vendor\":\"Red Hat\",\"product\":\"Red Hat Enterprise Linux 8\",\"defaultStatus\":\"unaffected\",\"collectionURL\":\"https://access.redhat.com/downloads/content/package-browser/\",\"packageName\":\"kernel\",\"cpes\":[\"cpe:/o:redhat:enterprise_linux:8\"]},{\"vendor\":\"Red Hat\",\"product\":\"Red Hat Enterprise Linux 8\",\"defaultStatus\":\"unaffected\",\"collectionURL\":\"https://access.redhat.com/downloads/content/package-browser/\",\"packageName\":\"kernel-rt\",\"cpes\":[\"cpe:/o:redhat:enterprise_linux:8\"]},{\"vendor\":\"Red Hat\",\"product\":\"Red Hat Enterprise Linux 9\",\"defaultStatus\":\"affected\",\"collectionURL\":\"https://access.redhat.com/downloads/content/package-browser/\",\"packageName\":\"kernel\",\"cpes\":[\"cpe:/o:redhat:enterprise_linux:9\"]},{\"vendor\":\"Red Hat\",\"product\":\"Red Hat Enterprise Linux 9\",\"defaultStatus\":\"affected\",\"collectionURL\":\"https://access.redhat.com/downloads/content/package-browser/\",\"packageName\":\"kernel-rt\",\"cpes\":[\"cpe:/o:redhat:enterprise_linux:9\"]}]}],\"metrics\":{\"cvssMetricV31\":[{\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\",\"type\":\"Secondary\",\"cvssData\":{\"version\":\"3.1\",\"vectorString\":\"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H\",\"baseScore\":7.8,\"baseSeverity\":\"HIGH\",\"attackVector\":\"LOCAL\",\"attackComplexity\":\"LOW\",\"privilegesRequired\":\"LOW\",\"userInteraction\":\"NONE\",\"scope\":\"UNCHANGED\",\"confidentialityImpact\":\"HIGH\",\"integrityImpact\":\"HIGH\",\"availabilityImpact\":\"HIGH\"},\"exploitabilityScore\":1.8,\"impactScore\":5.9},{\"source\":\"0b0ca135-0b70-47e7-9f44-1890c2a1c46c\",\"type\":\"Secondary\",\"cvssData\":{\"version\":\"3.1\",\"vectorString\":\"CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H\",\"baseScore\":6.4,\"baseSeverity\":\"MEDIUM\",\"attackVector\":\"LOCAL\",\"attackComplexity\":\"HIGH\",\"privilegesRequired\":\"HIGH\",\"userInteraction\":\"NONE\",\"scope\":\"UNCHANGED\",\"confidentialityImpact\":\"HIGH\",\"integrityImpact\":\"HIGH\",\"availabilityImpact\":\"HIGH\"},\"exploitabilityScore\":0.5,\"impactScore\":5.9}]},\"weaknesses\":[{\"source\":\"nvd@nist.gov\",\"type\":\"Primary\",\"description\":[{\"lang\":\"en\",\"value\":\"NVD-CWE-noinfo\"}]},{\"source\":\"0b0ca135-0b70-47e7-9f44-1890c2a1c46c\",\"type\":\"Secondary\",\"description\":[{\"lang\":\"en\",\"value\":\"CWE-386\"}]}],\"configurations\":[{\"nodes\":[{\"operator\":\"OR\",\"negate\":false,\"cpeMatch\":[{\"vulnerable\":true,\"criteria\":\"cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*\",\"versionStartIncluding\":\"6.11\",\"versionEndExcluding\":\"6.12.91\",\"matchCriteriaId\":\"88847604-FD87-4DC8-8370-F07E77FD74A2\"},{\"vulnerable\":true,\"criteria\":\"cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*\",\"versionStartIncluding\":\"6.13\",\"versionEndExcluding\":\"6.18.33\",\"matchCriteriaId\":\"96D99E49-380D-43AB-BDBA-25C3AD018A9C\"},{\"vulnerable\":true,\"criteria\":\"cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*\",\"versionStartIncluding\":\"6.19\",\"versionEndExcluding\":\"7.0.10\",\"matchCriteriaId\":\"A13475D2-59BF-4716-94B5-7C1D239A2CF4\"}]}]}],\"references\":[{\"url\":\"https://git.kernel.org/stable/c/13c02881e49aac4c82b261faa26db9edf2567231\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\",\"tags\":[\"Patch\"]},{\"url\":\"https://git.kernel.org/stable/c/2f2ec8e7730e21fc9bd49e0de9cdd58213ea24d0\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\",\"tags\":[\"Patch\"]},{\"url\":\"https://git.kernel.org/stable/c/691adf738817275368ed56311b7d798d617823a3\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\",\"tags\":[\"Patch\"]},{\"url\":\"https://git.kernel.org/stable/c/7d73c72cccac651acc891377a5e623e4021c6380\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\",\"tags\":[\"Patch\"]},{\"url\":\"https://access.redhat.com/security/cve/CVE-2026-53081\",\"source\":\"0b0ca135-0b70-47e7-9f44-1890c2a1c46c\",\"tags\":[\"Third Party Advisory\"]},{\"url\":\"https://bugzilla.redhat.com/show_bug.cgi?id=2492322\",\"source\":\"0b0ca135-0b70-47e7-9f44-1890c2a1c46c\",\"tags\":[\"Third Party Advisory\"]},{\"url\":\"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-53081.json\",\"source\":\"0b0ca135-0b70-47e7-9f44-1890c2a1c46c\",\"tags\":[\"Third Party Advisory\"]}]}}",
    "redhat_vex": {
      "aggregate_severity": "Moderate",
      "current_release_date": "2026-07-06T14:22:59+00:00",
      "cve": "CVE-2026-53081",
      "id": "CVE-2026-53081",
      "initial_release_date": "2026-06-24T00:00:00+00:00",
      "product_status:known_affected": "184",
      "product_status:known_not_affected": "90",
      "source": "Red Hat CSAF VEX",
      "status": "final",
      "title": "kernel: bpf: Enforce regsafe base id consistency for BPF_ADD_CONST scalars",
      "url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-53081.json",
      "version": "3"
    },
    "suse_vex": {
      "aggregate_severity": "moderate",
      "current_release_date": "2026-07-15T18:49:29Z",
      "cve": "CVE-2026-53081",
      "id": "CVE-2026-53081",
      "initial_release_date": "2026-07-01T03:19:03Z",
      "product_status:known_affected": "162",
      "product_status:known_not_affected": "131",
      "source": "SUSE CSAF VEX",
      "status": "interim",
      "title": "SUSE CVE CVE-2026-53081",
      "url": "https://ftp.suse.com/pub/projects/security/csaf-vex/cve-2026-53081.json",
      "version": "4"
    }
  }
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.





Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.


Detection rules are retrieved from Rulezet.