FKIE_CVE-2024-26890
Vulnerability from fkie_nvd - Published: 2024-04-17 11:15 - Updated: 2025-03-21 14:39
Severity
Summary
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btrtl: fix out of bounds memory access
The problem is detected by KASAN.
btrtl driver uses private hci data to store 'struct btrealtek_data'.
If btrtl driver is used with btusb, then memory for private hci data
is allocated in btusb. But no private data is allocated after hci_dev,
when btrtl is used with hci_h5.
This commit adds memory allocation for hci_h5 case.
==================================================================
BUG: KASAN: slab-out-of-bounds in btrtl_initialize+0x6cc/0x958 [btrtl]
Write of size 8 at addr ffff00000f5a5748 by task kworker/u9:0/76
Hardware name: Pine64 PinePhone (1.2) (DT)
Workqueue: hci0 hci_power_on [bluetooth]
Call trace:
dump_backtrace+0x9c/0x128
show_stack+0x20/0x38
dump_stack_lvl+0x48/0x60
print_report+0xf8/0x5d8
kasan_report+0x90/0xd0
__asan_store8+0x9c/0xc0
[btrtl]
h5_btrtl_setup+0xd0/0x2f8 [hci_uart]
h5_setup+0x50/0x80 [hci_uart]
hci_uart_setup+0xd4/0x260 [hci_uart]
hci_dev_open_sync+0x1cc/0xf68 [bluetooth]
hci_dev_do_open+0x34/0x90 [bluetooth]
hci_power_on+0xc4/0x3c8 [bluetooth]
process_one_work+0x328/0x6f0
worker_thread+0x410/0x778
kthread+0x168/0x178
ret_from_fork+0x10/0x20
Allocated by task 53:
kasan_save_stack+0x3c/0x68
kasan_save_track+0x20/0x40
kasan_save_alloc_info+0x68/0x78
__kasan_kmalloc+0xd4/0xd8
__kmalloc+0x1b4/0x3b0
hci_alloc_dev_priv+0x28/0xa58 [bluetooth]
hci_uart_register_device+0x118/0x4f8 [hci_uart]
h5_serdev_probe+0xf4/0x178 [hci_uart]
serdev_drv_probe+0x54/0xa0
really_probe+0x254/0x588
__driver_probe_device+0xc4/0x210
driver_probe_device+0x64/0x160
__driver_attach_async_helper+0x88/0x158
async_run_entry_fn+0xd0/0x388
process_one_work+0x328/0x6f0
worker_thread+0x410/0x778
kthread+0x168/0x178
ret_from_fork+0x10/0x20
Last potentially related work creation:
kasan_save_stack+0x3c/0x68
__kasan_record_aux_stack+0xb0/0x150
kasan_record_aux_stack_noalloc+0x14/0x20
__queue_work+0x33c/0x960
queue_work_on+0x98/0xc0
hci_recv_frame+0xc8/0x1e8 [bluetooth]
h5_complete_rx_pkt+0x2c8/0x800 [hci_uart]
h5_rx_payload+0x98/0xb8 [hci_uart]
h5_recv+0x158/0x3d8 [hci_uart]
hci_uart_receive_buf+0xa0/0xe8 [hci_uart]
ttyport_receive_buf+0xac/0x178
flush_to_ldisc+0x130/0x2c8
process_one_work+0x328/0x6f0
worker_thread+0x410/0x778
kthread+0x168/0x178
ret_from_fork+0x10/0x20
Second to last potentially related work creation:
kasan_save_stack+0x3c/0x68
__kasan_record_aux_stack+0xb0/0x150
kasan_record_aux_stack_noalloc+0x14/0x20
__queue_work+0x788/0x960
queue_work_on+0x98/0xc0
__hci_cmd_sync_sk+0x23c/0x7a0 [bluetooth]
__hci_cmd_sync+0x24/0x38 [bluetooth]
btrtl_initialize+0x760/0x958 [btrtl]
h5_btrtl_setup+0xd0/0x2f8 [hci_uart]
h5_setup+0x50/0x80 [hci_uart]
hci_uart_setup+0xd4/0x260 [hci_uart]
hci_dev_open_sync+0x1cc/0xf68 [bluetooth]
hci_dev_do_open+0x34/0x90 [bluetooth]
hci_power_on+0xc4/0x3c8 [bluetooth]
process_one_work+0x328/0x6f0
worker_thread+0x410/0x778
kthread+0x168/0x178
ret_from_fork+0x10/0x20
==================================================================
References
Impacted products
| Vendor | Product | Version | |
|---|---|---|---|
| linux | linux_kernel | * | |
| linux | linux_kernel | * | |
| linux | linux_kernel | * |
{
"configurations": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "E00814DC-0BA7-431A-9926-80FEB4A96C68",
"versionEndExcluding": "6.6.23",
"versionStartIncluding": "6.2",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "9B95D3A6-E162-47D5-ABFC-F3FA74FA7CFD",
"versionEndExcluding": "6.7.11",
"versionStartIncluding": "6.7",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "543A75FF-25B8-4046-A514-1EA8EDD87AB1",
"versionEndExcluding": "6.8.2",
"versionStartIncluding": "6.8",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nBluetooth: btrtl: fix out of bounds memory access\n\nThe problem is detected by KASAN.\nbtrtl driver uses private hci data to store \u0027struct btrealtek_data\u0027.\nIf btrtl driver is used with btusb, then memory for private hci data\nis allocated in btusb. But no private data is allocated after hci_dev,\nwhen btrtl is used with hci_h5.\n\nThis commit adds memory allocation for hci_h5 case.\n\n ==================================================================\n BUG: KASAN: slab-out-of-bounds in btrtl_initialize+0x6cc/0x958 [btrtl]\n Write of size 8 at addr ffff00000f5a5748 by task kworker/u9:0/76\n\n Hardware name: Pine64 PinePhone (1.2) (DT)\n Workqueue: hci0 hci_power_on [bluetooth]\n Call trace:\n dump_backtrace+0x9c/0x128\n show_stack+0x20/0x38\n dump_stack_lvl+0x48/0x60\n print_report+0xf8/0x5d8\n kasan_report+0x90/0xd0\n __asan_store8+0x9c/0xc0\n \t [btrtl]\n h5_btrtl_setup+0xd0/0x2f8 [hci_uart]\n h5_setup+0x50/0x80 [hci_uart]\n hci_uart_setup+0xd4/0x260 [hci_uart]\n hci_dev_open_sync+0x1cc/0xf68 [bluetooth]\n hci_dev_do_open+0x34/0x90 [bluetooth]\n hci_power_on+0xc4/0x3c8 [bluetooth]\n process_one_work+0x328/0x6f0\n worker_thread+0x410/0x778\n kthread+0x168/0x178\n ret_from_fork+0x10/0x20\n\n Allocated by task 53:\n kasan_save_stack+0x3c/0x68\n kasan_save_track+0x20/0x40\n kasan_save_alloc_info+0x68/0x78\n __kasan_kmalloc+0xd4/0xd8\n __kmalloc+0x1b4/0x3b0\n hci_alloc_dev_priv+0x28/0xa58 [bluetooth]\n hci_uart_register_device+0x118/0x4f8 [hci_uart]\n h5_serdev_probe+0xf4/0x178 [hci_uart]\n serdev_drv_probe+0x54/0xa0\n really_probe+0x254/0x588\n __driver_probe_device+0xc4/0x210\n driver_probe_device+0x64/0x160\n __driver_attach_async_helper+0x88/0x158\n async_run_entry_fn+0xd0/0x388\n process_one_work+0x328/0x6f0\n worker_thread+0x410/0x778\n kthread+0x168/0x178\n ret_from_fork+0x10/0x20\n\n Last potentially related work creation:\n kasan_save_stack+0x3c/0x68\n __kasan_record_aux_stack+0xb0/0x150\n kasan_record_aux_stack_noalloc+0x14/0x20\n __queue_work+0x33c/0x960\n queue_work_on+0x98/0xc0\n hci_recv_frame+0xc8/0x1e8 [bluetooth]\n h5_complete_rx_pkt+0x2c8/0x800 [hci_uart]\n h5_rx_payload+0x98/0xb8 [hci_uart]\n h5_recv+0x158/0x3d8 [hci_uart]\n hci_uart_receive_buf+0xa0/0xe8 [hci_uart]\n ttyport_receive_buf+0xac/0x178\n flush_to_ldisc+0x130/0x2c8\n process_one_work+0x328/0x6f0\n worker_thread+0x410/0x778\n kthread+0x168/0x178\n ret_from_fork+0x10/0x20\n\n Second to last potentially related work creation:\n kasan_save_stack+0x3c/0x68\n __kasan_record_aux_stack+0xb0/0x150\n kasan_record_aux_stack_noalloc+0x14/0x20\n __queue_work+0x788/0x960\n queue_work_on+0x98/0xc0\n __hci_cmd_sync_sk+0x23c/0x7a0 [bluetooth]\n __hci_cmd_sync+0x24/0x38 [bluetooth]\n btrtl_initialize+0x760/0x958 [btrtl]\n h5_btrtl_setup+0xd0/0x2f8 [hci_uart]\n h5_setup+0x50/0x80 [hci_uart]\n hci_uart_setup+0xd4/0x260 [hci_uart]\n hci_dev_open_sync+0x1cc/0xf68 [bluetooth]\n hci_dev_do_open+0x34/0x90 [bluetooth]\n hci_power_on+0xc4/0x3c8 [bluetooth]\n process_one_work+0x328/0x6f0\n worker_thread+0x410/0x778\n kthread+0x168/0x178\n ret_from_fork+0x10/0x20\n =================================================================="
},
{
"lang": "es",
"value": "En el kernel de Linux se ha resuelto la siguiente vulnerabilidad: Bluetooth: btrtl: arreglar acceso a memoria fuera de los l\u00edmites El problema es detectado por KASAN. El controlador btrtl utiliza datos privados de hci para almacenar \u0027struct btrealtek_data\u0027. Si se utiliza el controlador btrtl con btusb, entonces la memoria para los datos privados de hci se asigna en btusb. Pero no se asignan datos privados despu\u00e9s de hci_dev, cuando se usa btrtl con hci_h5. Esta confirmaci\u00f3n agrega asignaci\u00f3n de memoria para el caso hci_h5. ==================================================== ================ ERROR: KASAN: losa fuera de los l\u00edmites en btrtl_initialize+0x6cc/0x958 [btrtl] Escritura de tama\u00f1o 8 en la direcci\u00f3n ffff00000f5a5748 por tarea kworker/u9:0 /76 Nombre del hardware: Pine64 PinePhone (1.2) (DT) Cola de trabajo: hci0 hci_power_on [bluetooth] Rastreo de llamadas: dump_backtrace+0x9c/0x128 show_stack+0x20/0x38 dump_stack_lvl+0x48/0x60 print_report+0xf8/0x5d8 kasan_report+0x90/0xd0 __asan_store8 + 0x9c/0xc0 [btrtl] h5_btrtl_setup+0xd0/0x2f8 [hci_uart] h5_setup+0x50/0x80 [hci_uart] hci_uart_setup+0xd4/0x260 [hci_uart] hci_dev_open_sync+0x1cc/0xf68 [bluetooth] abierto+0x34/0x90 [bluetooth] hci_power_on+0xc4/ 0x3c8 [bluetooth] Process_one_work+0x328/0x6f0 trabajador_thread+0x410/0x778 kthread+0x168/0x178 ret_from_fork+0x10/0x20 Asignado por tarea 53: kasan_save_stack+0x3c/0x68 kasan_save_track+0x20/0x40 _alloc_info+0x68/0x78 __kasan_kmalloc+0xd4/0xd8 __kmalloc +0x1b4/0x3b0 hci_alloc_dev_priv+0x28/0xa58 [bluetooth] hci_uart_register_device+0x118/0x4f8 [hci_uart] h5_serdev_probe+0xf4/0x178 [hci_uart] serdev_drv_probe+0x54/0xa0realmente_probe+0x254/ 0x588 __driver_probe_device+0xc4/0x210 driver_probe_device+0x64/0x160 __driver_attach_async_helper+ 0x88/0x158 async_run_entry_fn+0xd0/0x388 Process_one_work+0x328/0x6f0 trabajador_thread+0x410/0x778 kthread+0x168/0x178 ret_from_fork+0x10/0x20 \u00daltima creaci\u00f3n de trabajo potencialmente relacionado: kasan_save_stack+0x3c/0x68 san_record_aux_stack+0xb0/0x150 kasan_record_aux_stack_noalloc+0x14/0x20 __queue_work +0x33c/0x960 queue_work_on+0x98/0xc0 hci_recv_frame+0xc8/0x1e8 [bluetooth] h5_complete_rx_pkt+0x2c8/0x800 [hci_uart] h5_rx_payload+0x98/0xb8 [hci_uart] h5_recv+0x158/0x3d8 [ hci_uart] hci_uart_receive_buf+0xa0/0xe8 [hci_uart] ttyport_receive_buf +0xac/0x178 Flush_to_ldisc+0x130/0x2c8 Process_one_work+0x328/0x6f0 trabajador_thread+0x410/0x778 kthread+0x168/0x178 ret_from_fork+0x10/0x20 Pen\u00faltima creaci\u00f3n de trabajo potencialmente relacionado: kasan_save_stack+0x3c/0x68 _record_aux_stack+0xb0/0x150 kasan_record_aux_stack_noalloc+0x14 /0x20 __queue_work+0x788/0x960 queue_work_on+0x98/0xc0 __hci_cmd_sync_sk+0x23c/0x7a0 [bluetooth] __hci_cmd_sync+0x24/0x38 [bluetooth] btrtl_initialize+0x760/0x958 [btrtl] arriba+0xd0/0x2f8 [hci_uart] h5_setup+0x50/0x80 [ hci_uart] hci_uart_setup+0xd4/0x260 [hci_uart] hci_dev_open_sync+0x1cc/0xf68 [bluetooth] hci_dev_do_open+0x34/0x90 [bluetooth] hci_power_on+0xc4/0x3c8 [bluetooth] Process_one_work+0x328/0x6f0 trabajador_thread+0x 410/0x778 kthread+0x168/0x178 ret_from_fork +0x10/0x20 ================================================ ====================="
}
],
"id": "CVE-2024-26890",
"lastModified": "2025-03-21T14:39:22.377",
"metrics": {
"cvssMetricV31": [
{
"cvssData": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "LOW",
"baseScore": 6.5,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "LOW",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:L",
"version": "3.1"
},
"exploitabilityScore": 3.9,
"impactScore": 2.5,
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"type": "Secondary"
}
]
},
"published": "2024-04-17T11:15:10.423",
"references": [
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/0c657e641df1e77d6087688190f632cad9c0439b"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/2f232bc389a4f5943c40733582f9edf77b89e499"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/dd163fa34c483f1674aa2510accce11a224f649e"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/de4e88ec58c4202efd1f02eebb4939bbf6945358"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/0c657e641df1e77d6087688190f632cad9c0439b"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/2f232bc389a4f5943c40733582f9edf77b89e499"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/dd163fa34c483f1674aa2510accce11a224f649e"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/de4e88ec58c4202efd1f02eebb4939bbf6945358"
}
],
"sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"vulnStatus": "Analyzed",
"weaknesses": [
{
"description": [
{
"lang": "en",
"value": "CWE-125"
}
],
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"type": "Secondary"
}
]
}
Loading…
Loading…
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Loading…
Loading…