ICSA-18-345-01

Vulnerability from csaf_cisa - Published: 2018-12-11 00:00 - Updated: 2018-12-11 00:00
Summary
McAfee SINAMICS PERFECT HARMONY GH180

Notes

CISA Disclaimer
This CSAF advisory was extracted from unstructured data and may contain inaccuracies. If you notice any errors, please reach out to the designated contact at CISA CSAF: central@cisa.dhs.gov
Legal Notice
All information products included in https://us-cert.cisa.gov/ics are provided "as is" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.
Risk evaluation
These files can be executed to compromise the HMI, and by extension, the drive system.
Critical infrastructure sectors
Chemical, Energy, Food and Agriculture, Healthcare and Public Health, Transportation, Water and Wastewater Systems
Countries/areas deployed
Worldwide
Company headquarters location
Germany
Recommended Practices
NCCIC reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.NCCIC also provides a section for control systems security recommended practices on the ICS-CERT web page. Several recommended practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
Recommended Practices
Additional mitigation guidance and recommended practices are publicly available on the ICS-CERT website in the Technical Information Paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.Organizations observing any suspected malicious activity should follow their established internal procedures and report their findings to NCCIC for tracking and correlation against other incidents.
Additional Resources
For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories
Additional Resources
For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories
Exploitability
No known public exploits specifically target this vulnerability. This vulnerability is not exploitable remotely.
To clipboard 

{
  "document": {
    "acknowledgments": [
      {
        "organization": "McAfee",
        "summary": "reporting this vulnerability to Siemens"
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited",
      "tlp": {
        "label": "WHITE",
        "url": "https://us-cert.cisa.gov/tlp/"
      }
    },
    "lang": "en-US",
    "notes": [
      {
        "category": "general",
        "text": "This CSAF advisory was extracted from unstructured data and may contain inaccuracies. If you notice any errors, please reach out to the designated contact at CISA CSAF: central@cisa.dhs.gov",
        "title": "CISA Disclaimer"
      },
      {
        "category": "legal_disclaimer",
        "text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
        "title": "Legal Notice"
      },
      {
        "category": "summary",
        "text": "These files can be executed to compromise the HMI, and by extension, the drive system.",
        "title": "Risk evaluation"
      },
      {
        "category": "other",
        "text": "Chemical, Energy, Food and Agriculture, Healthcare and Public Health, Transportation, Water and Wastewater Systems",
        "title": "Critical infrastructure sectors"
      },
      {
        "category": "other",
        "text": "Worldwide",
        "title": "Countries/areas deployed"
      },
      {
        "category": "other",
        "text": "Germany",
        "title": "Company headquarters location"
      },
      {
        "category": "general",
        "text": "NCCIC reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.NCCIC also provides a section for control systems security recommended practices on the ICS-CERT web page. Several recommended practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Additional mitigation guidance and recommended practices are publicly available on the ICS-CERT website in the Technical Information Paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.Organizations observing any suspected malicious activity should follow their established internal procedures and report their findings to NCCIC for tracking and correlation against other incidents.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and \nsolutions, please contact the Siemens ProductCERT:\n\nhttps://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and  solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "other",
        "text": "No known public exploits specifically target this vulnerability. This vulnerability is not exploitable remotely.",
        "title": "Exploitability"
      }
    ],
    "publisher": {
      "category": "coordinator",
      "contact_details": "Email: CISAservicedesk@cisa.dhs.gov;\n Toll Free: 1-888-282-0870",
      "name": "CISA",
      "namespace": "https://www.cisa.gov/"
    },
    "references": [
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-18-345-01 JSON",
        "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2018/icsa-18-345-01.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-18-345-01 Web Version",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-18-345-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/tips/ICS-TIP-12-146-01B"
      },
      {
        "category": "external",
        "summary": "SSA-496604: SSA-674165: Vulnerability in McAfee MACC product for SINAMICS PERFECT HARMONY GH180 drives - TXT Version",
        "url": "https://cert-portal.siemens.com/productcert/txt/SSA-674165.txt"
      }
    ],
    "title": "McAfee SINAMICS PERFECT HARMONY GH180",
    "tracking": {
      "current_release_date": "2018-12-11T00:00:00.000000Z",
      "generator": {
        "engine": {
          "name": "CISA CSAF Generator",
          "version": "1.0.0"
        }
      },
      "id": "ICSA-18-345-01",
      "initial_release_date": "2018-12-11T00:00:00.000000Z",
      "revision_history": [
        {
          "date": "2018-12-11T00:00:00.000000Z",
          "legacy_version": "Initial",
          "number": "1",
          "summary": "ICSA-18-345-01 McAfee Application and Change Control (MACC)"
        }
      ],
      "status": "final",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version",
                "name": "MLFB 6SR32..-\u2026..-\u2026. with option A30 (HMIs 12 inch or larger)",
                "product": {
                  "name": "SINAMICS PERFECT HARMONY GH180 Drives: MLFB 6SR32..-\u2026..-\u2026. with option A30 (HMIs 12 inch or larger)",
                  "product_id": "CSAFPID-0001"
                }
              }
            ],
            "category": "product_name",
            "name": "SINAMICS PERFECT HARMONY GH180 Drives"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "MLFB 6SR42..-\u2026..-\u2026. with option A30 (HMIs 12 inch or larger)",
                "product": {
                  "name": "SINAMICS PERFECT HARMONY GH180 Drives: MLFB 6SR42..-\u2026..-\u2026. with option A30 (HMIs 12 inch or larger)",
                  "product_id": "CSAFPID-0002"
                }
              }
            ],
            "category": "product_name",
            "name": "SINAMICS PERFECT HARMONY GH180 Drives"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "MLFB 6SR52..-\u2026..-\u2026. with option A30 (HMIs 12 inch or larger)",
                "product": {
                  "name": "SINAMICS PERFECT HARMONY GH180 Drives: MLFB 6SR52..-\u2026..-\u2026. with option A30 (HMIs 12 inch or larger)",
                  "product_id": "CSAFPID-0003"
                }
              }
            ],
            "category": "product_name",
            "name": "SINAMICS PERFECT HARMONY GH180 Drives"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "MLFB 6SR325..-\u2026..-\u2026. (High Availability)",
                "product": {
                  "name": "SINAMICS PERFECT HARMONY GH180 Drives: MLFB 6SR325..-\u2026..-\u2026. (High Availability)",
                  "product_id": "CSAFPID-0004"
                }
              }
            ],
            "category": "product_name",
            "name": "SINAMICS PERFECT HARMONY GH180 Drives"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "MLFB 6SR32..-\u2026..-\u2026. with option A30 (HMIs 12 inch or larger) where the",
                "product": {
                  "name": "SINAMICS PERFECT HARMONY GH180 Drives: MLFB 6SR32..-\u2026..-\u2026. with option A30 (HMIs 12 inch or larger) where the",
                  "product_id": "CSAFPID-0005"
                }
              }
            ],
            "category": "product_name",
            "name": "SINAMICS PERFECT HARMONY GH180 Drives"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "MLFB 6SR42..-\u2026..-\u2026. with option A30 (HMIs 12 inch or larger) where the",
                "product": {
                  "name": "SINAMICS PERFECT HARMONY GH180 Drives: MLFB 6SR42..-\u2026..-\u2026. with option A30 (HMIs 12 inch or larger) where the",
                  "product_id": "CSAFPID-0006"
                }
              }
            ],
            "category": "product_name",
            "name": "SINAMICS PERFECT HARMONY GH180 Drives"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "MLFB 6SR52..-\u2026..-\u2026. with option A30 (HMIs 12 inch or larger) where the",
                "product": {
                  "name": "SINAMICS PERFECT HARMONY GH180 Drives: MLFB 6SR52..-\u2026..-\u2026. with option A30 (HMIs 12 inch or larger) where the",
                  "product_id": "CSAFPID-0007"
                }
              }
            ],
            "category": "product_name",
            "name": "SINAMICS PERFECT HARMONY GH180 Drives"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "MLFB 6SR325..-\u2026..-\u2026. (High Availability) where the HMI is operating",
                "product": {
                  "name": "SINAMICS PERFECT HARMONY GH180 Drives: MLFB 6SR325..-\u2026..-\u2026. (High Availability) where the HMI is operating",
                  "product_id": "CSAFPID-0008"
                }
              }
            ],
            "category": "product_name",
            "name": "SINAMICS PERFECT HARMONY GH180 Drives"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2018-6690",
      "cwe": {
        "id": "CWE-284",
        "name": "Improper Access Control"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The executable files from a hard drive solidified by MACC, of an external system, can be executed on the system that did not generate the inventory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "web.nvd.nist.gov",
          "url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2018-6690"
        },
        {
          "category": "external",
          "summary": "www.first.org",
          "url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N"
        }
      ],
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "McAfee has issued Security Bulletin SB10250 to address this vulnerability in MACC. SINAMICS PERFECT HARMONY GH180 Drives with HMIs produced between November 4, 2015 and October 9, 2018, use MACC as part of their software package, if option A30 was part of the order.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.0"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008"
          ]
        }
      ]
    }
  ]
}


Log in or create an account to share your comment.




Tags
Taxonomy of the tags.




Sightings

Author Source Type Date

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.



Detection rules are retrieved from Rulezet.