{
  "document": {
    "acknowledgments": [
      {
        "organization": "Siemens",
        "summary": "reporting these vulnerabilities to CISA"
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited",
      "tlp": {
        "label": "WHITE",
        "url": "https://us-cert.cisa.gov/tlp/"
      }
    },
    "lang": "en-US",
    "notes": [
      {
        "category": "general",
        "text": "This CSAF advisory was extracted from unstructured data and may contain inaccuracies. If you notice any errors, please reach out to the designated contact at CISA CSAF: central@cisa.dhs.gov",
        "title": "CISA Disclaimer"
      },
      {
        "category": "legal_disclaimer",
        "text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
        "title": "Legal Notice"
      },
      {
        "category": "summary",
        "text": "Successful exploitation of these vulnerabilities could allow an attacker to cause a memory leak or an infinite loop situation resulting in a denial-of-service condition.",
        "title": "Risk evaluation"
      },
      {
        "category": "other",
        "text": "Critical Manufacturing",
        "title": "Critical infrastructure sectors"
      },
      {
        "category": "other",
        "text": "Worldwide",
        "title": "Countries/areas deployed"
      },
      {
        "category": "other",
        "text": "Germany",
        "title": "Company headquarters location"
      },
      {
        "category": "general",
        "text": "CISA recommends users take defensive measures to minimize the risk of exploitation of this vulnerability. Specifically, users should:",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.\nCISA also provides a section for control systems security recommended practices on the ICS webpage onus-cert.cisa.gov. Several recommended practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Additional mitigation guidance and recommended practices are publicly available on the ICS webpage on us-cert.cisa.gov in the Technical Information Paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.\nOrganizations observing any suspected malicious activity should follow their established internal procedures and report their findings to CISA for tracking and correlation against other incidents.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "other",
        "text": "No known public exploits specifically target these vulnerabilities.",
        "title": "Exploitability"
      }
    ],
    "publisher": {
      "category": "coordinator",
      "contact_details": "Email: CISAservicedesk@cisa.dhs.gov;\n Toll Free: 1-888-282-0870",
      "name": "CISA",
      "namespace": "https://www.cisa.gov/"
    },
    "references": [
      {
        "category": "external",
        "summary": "SSA-292794: Multiple Denial-of-Service Vulnerabilities in SINEMA Remote Connect Server - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-292794.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-21-103-08 JSON",
        "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2021/icsa-21-103-08.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-21-103-08 Web Version",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-21-103-08"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/ics/alerts/ICS-ALERT-10-301-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/ics/tips/ICS-TIP-12-146-01B"
      },
      {
        "category": "external",
        "summary": "SSA-292794: Multiple Denial-of-Service Vulnerabilities in SINEMA Remote Connect Server - PDF Version",
        "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-292794.pdf"
      },
      {
        "category": "external",
        "summary": "SSA-292794: Multiple Denial-of-Service Vulnerabilities in SINEMA Remote Connect Server - TXT Version",
        "url": "https://cert-portal.siemens.com/productcert/txt/ssa-292794.txt"
      }
    ],
    "title": "Siemens SINEMA Remote Connect Server",
    "tracking": {
      "current_release_date": "2021-04-13T00:00:00.000000Z",
      "generator": {
        "engine": {
          "name": "CISA CSAF Generator",
          "version": "1.0.0"
        }
      },
      "id": "ICSA-21-103-08",
      "initial_release_date": "2021-04-13T00:00:00.000000Z",
      "revision_history": [
        {
          "date": "2021-04-13T00:00:00.000000Z",
          "legacy_version": "Initial",
          "number": "1",
          "summary": "ICSA-21-103-08 Siemens SINEMA Remote Connect Server"
        }
      ],
      "status": "final",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003c V3.0",
                "product": {
                  "name": "SINEMA Remote Connect Server",
                  "product_id": "CSAFPID-0001"
                }
              }
            ],
            "category": "product_name",
            "name": "SINEMA Remote Connect Server"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2019-19956",
      "cwe": {
        "id": "CWE-772",
        "name": "Missing Release of Resource after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmlParseBalancedChunkMemoryRecover in parser.c in libxml2 before 2.9.10 has a memory leak related to newDoc-\u003eoldNs.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "references": [
        {
          "summary": "CVE-2019-19956 - SINEMA Remote Connect Server",
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109793790"
        },
        {
          "summary": "CVE-2019-19956 Mitre 5.0 json",
          "url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-19956.json"
        },
        {
          "category": "external",
          "summary": "web.nvd.nist.gov",
          "url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-19956"
        },
        {
          "category": "external",
          "summary": "www.first.org",
          "url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H"
        }
      ],
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109793790"
        },
        {
          "category": "mitigation",
          "details": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: https://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\n\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2019-19956"
    },
    {
      "cve": "CVE-2020-7595",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmlStringLenDecodeEntities in parser.c in libxml2 2.9.10 has an infinite loop in a certain end-of-file situation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "references": [
        {
          "summary": "CVE-2020-7595 - SINEMA Remote Connect Server",
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109793790"
        },
        {
          "summary": "CVE-2020-7595 Mitre 5.0 json",
          "url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2020-7595.json"
        },
        {
          "category": "external",
          "summary": "web.nvd.nist.gov",
          "url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2020-7595"
        },
        {
          "category": "external",
          "summary": "www.first.org",
          "url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H"
        }
      ],
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109793790"
        },
        {
          "category": "mitigation",
          "details": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: https://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\n\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2020-7595"
    }
  ]
}

{
  "document": {
    "acknowledgments": [
      {
        "organization": "Siemens ProductCERT",
        "summary": "reporting these vulnerabilities to CISA."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited",
      "tlp": {
        "label": "WHITE",
        "url": "https://us-cert.cisa.gov/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the firmware version V3.1 for the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP (incl. SIPLUS variant).\n\nThese GNU/Linux vulnerabilities have been externally identified. Siemens is preparing fix versions and recommends specific countermeasures for products where fixes are not, or not yet available.\n\nNote: This SSA advises vulnerabilities for firmware version V3.1 only; for versions \u003c V3.1 refer to Siemens Security Bulletin SSB-439005 (\nhttps://cert-portal.siemens.com/productcert/html/ssb-439005.html).",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "Siemens Security Advisories are subject to the terms and conditions contained in Siemens\u0027 underlying license terms or other applicable agreements previously agreed to with Siemens (hereinafter \"License Terms\"). To the extent applicable to information, software or documentation made available in or through a Siemens Security Advisory, the Terms of Use of Siemens\u0027 Global Website (https://www.siemens.com/terms_of_use, hereinafter \"Terms of Use\"), in particular Sections 8-10 of the Terms of Use, shall apply additionally. In case of conflicts, the License Terms shall prevail over the Terms of Use.",
        "title": "Terms of Use"
      },
      {
        "category": "legal_disclaimer",
        "text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
        "title": "Legal Notice"
      },
      {
        "category": "other",
        "text": "This CISA CSAF advisory was converted from Siemens ProductCERT\u0027s CSAF advisory.",
        "title": "Advisory Conversion Disclaimer"
      },
      {
        "category": "other",
        "text": "Multiple",
        "title": "Critical infrastructure sectors"
      },
      {
        "category": "other",
        "text": "Worldwide",
        "title": "Countries/areas deployed"
      },
      {
        "category": "other",
        "text": "Germany",
        "title": "Company headquarters location"
      },
      {
        "category": "general",
        "text": "CISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Minimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Locate control system networks and remote devices behind firewalls and isolate them from business networks.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.",
        "title": "Recommended Practices"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "central@cisa.dhs.gov",
      "name": "CISA",
      "namespace": "https://www.cisa.gov/"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-398330: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1 - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-398330.json"
      },
      {
        "category": "self",
        "summary": "SSA-398330: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1 - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-398330.html"
      },
      {
        "category": "self",
        "summary": "SSA-398330: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1 - PDF Version",
        "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-398330.pdf"
      },
      {
        "category": "self",
        "summary": "SSA-398330: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1 - TXT Version",
        "url": "https://cert-portal.siemens.com/productcert/txt/ssa-398330.txt"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-23-348-10 JSON",
        "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2023/icsa-23-348-10.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-23-348-10 - Web Version",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-23-348-10"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/alerts/ICS-ALERT-10-301-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/resources-tools/resources/ics-recommended-practices"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/topics/industrial-control-systems"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/sites/default/files/publications/Cybersecurity_Best_Practices_for_Industrial_Control_Systems.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/tips/ICS-TIP-12-146-01B"
      }
    ],
    "title": "Siemens SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1",
    "tracking": {
      "current_release_date": "2023-12-12T00:00:00Z",
      "generator": {
        "engine": {
          "name": "CISA CSAF Generator",
          "version": "1"
        }
      },
      "id": "ICSA-23-348-10",
      "initial_release_date": "2023-12-12T00:00:00Z",
      "revision_history": [
        {
          "date": "2023-12-12T00:00:00Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        }
      ],
      "status": "final",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003e=V3.1.0",
                "product": {
                  "name": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
                  "product_id": "1",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6ES7518-4AX00-1AB0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003e=V3.1.0",
                "product": {
                  "name": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
                  "product_id": "2",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6ES7518-4AX00-1AC0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003e=V3.1.0",
                "product": {
                  "name": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
                  "product_id": "3",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6ES7518-4FX00-1AB0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003e=V3.1.0",
                "product": {
                  "name": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
                  "product_id": "4",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6ES7518-4FX00-1AC0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003e=V3.1.0",
                "product": {
                  "name": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
                  "product_id": "5",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6AG1518-4AX00-4AC0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2013-0340",
      "cwe": {
        "id": "CWE-611",
        "name": "Improper Restriction of XML External Entity Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "expat 2.1.0 and earlier does not properly handle entities expansion unless an application developer uses the XML_SetEntityDeclHandler function, which allows remote attackers to cause a denial of service (resource consumption), send HTTP requests to intranet servers, or read arbitrary files via a crafted XML document, aka an XML External Entity (XXE) issue.  NOTE: it could be argued that because expat already provides the ability to disable external entity expansion, the responsibility for resolving this issue lies with application developers; according to this argument, this entry should be REJECTed, and each affected application would need its own CVE.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2013-0340"
    },
    {
      "cve": "CVE-2013-4235",
      "cwe": {
        "id": "CWE-367",
        "name": "Time-of-check Time-of-use (TOCTOU) Race Condition"
      },
      "notes": [
        {
          "category": "summary",
          "text": "shadow: TOCTOU (time-of-check time-of-use) race condition when copying and removing directory trees",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2013-4235"
    },
    {
      "cve": "CVE-2014-7209",
      "cwe": {
        "id": "CWE-77",
        "name": "Improper Neutralization of Special Elements used in a Command (\u0027Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "run-mailcap in the Debian mime-support package before 3.52-1+deb7u1 allows context-dependent attackers to execute arbitrary commands via shell metacharacters in a filename.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.0,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:C/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2014-7209"
    },
    {
      "cve": "CVE-2015-20107",
      "cwe": {
        "id": "CWE-77",
        "name": "Improper Neutralization of Special Elements used in a Command (\u0027Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python (aka CPython) up to 3.10.8, the mailcap module does not add escape characters into commands discovered in the system mailcap file. This may allow attackers to inject shell commands into applications that call mailcap.findmatch with untrusted input (if they lack validation of user-provided filenames or arguments). The fix is also back-ported to 3.7, 3.8, 3.9",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:H/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2015-20107"
    },
    {
      "cve": "CVE-2016-3189",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Use-after-free vulnerability in bzip2recover in bzip2 1.0.6 allows remote attackers to cause a denial of service (crash) via a crafted bzip2 file, related to block ends set to before the start of the block.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2016-3189"
    },
    {
      "cve": "CVE-2016-3709",
      "cwe": {
        "id": "CWE-79",
        "name": "Improper Neutralization of Input During Web Page Generation (\u0027Cross-site Scripting\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Possible cross-site scripting vulnerability in libxml after commit 960f0e2.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2016-3709"
    },
    {
      "cve": "CVE-2016-4658",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xpointer.c in libxml2 before 2.9.5 (as used in Apple iOS before 10, OS X before 10.12, tvOS before 10, and watchOS before 3, and other products) does not forbid namespace nodes in XPointer ranges, which allows remote attackers to execute arbitrary code or cause a denial of service (use-after-free and memory corruption) via a crafted XML document.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2016-4658"
    },
    {
      "cve": "CVE-2016-5131",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Use-after-free vulnerability in libxml2 through 2.9.4, as used in Google Chrome before 52.0.2743.82, allows remote attackers to cause a denial of service or possibly have unspecified other impact via vectors related to the XPointer range-to function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2016-5131"
    },
    {
      "cve": "CVE-2016-9318",
      "cwe": {
        "id": "CWE-611",
        "name": "Improper Restriction of XML External Entity Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 2.9.4 and earlier, as used in XMLSec 1.2.23 and earlier and other products, does not offer a flag directly indicating that the current document may be read but other files may not be opened, which makes it easier for remote attackers to conduct XML External Entity (XXE) attacks via a crafted document.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2016-9318"
    },
    {
      "cve": "CVE-2016-10228",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv program in the GNU C Library (aka glibc or libc6) 2.31 and earlier, when invoked with multiple suffixes in the destination encoding (TRANSLATE or IGNORE) along with the -c option, enters an infinite loop when processing invalid multi-byte input sequences, leading to a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2016-10228"
    },
    {
      "cve": "CVE-2016-10739",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the GNU C Library (aka glibc or libc6) through 2.28, the getaddrinfo function would successfully parse a string that contained an IPv4 address followed by whitespace and arbitrary characters, which could lead applications to incorrectly assume that it had parsed a valid string, without the possibility of embedded HTTP headers or other potentially dangerous substrings.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2016-10739"
    },
    {
      "cve": "CVE-2017-0663",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A remote code execution vulnerability in libxml2 could enable an attacker using a specially crafted file to execute arbitrary code within the context of an unprivileged process. This issue is rated as High due to the possibility of remote code execution in an application that uses this library. Product: Android. Versions: 4.4.4, 5.0.2, 5.1.1, 6.0, 6.0.1, 7.0, 7.1.1, 7.1.2. Android ID: A-37104170.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-0663"
    },
    {
      "cve": "CVE-2017-7375",
      "cwe": {
        "id": "CWE-611",
        "name": "Improper Restriction of XML External Entity Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw in libxml2 allows remote XML entity inclusion with default parser flags (i.e., when the caller did not request entity substitution, DTD validation, external DTD subset loading, or default DTD attributes). Depending on the context, this may expose a higher-risk attack surface in libxml2 not usually reachable with default parser flags, and expose content from local files, HTTP, or FTP servers (which might be otherwise unreachable).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-7375"
    },
    {
      "cve": "CVE-2017-7376",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer overflow in libxml2 allows remote attackers to execute arbitrary code by leveraging an incorrect limit for port values when handling redirects.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-7376"
    },
    {
      "cve": "CVE-2017-9047",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A buffer overflow was discovered in libxml2 20904-GITv2.9.4-16-g0741801. The function xmlSnprintfElementContent in valid.c is supposed to recursively dump the element content definition into a char buffer \u0027buf\u0027 of size \u0027size\u0027. The variable len is assigned strlen(buf). If the content-\u003etype is XML_ELEMENT_CONTENT_ELEMENT, then (i) the content-\u003eprefix is appended to buf (if it actually fits) whereupon (ii) content-\u003ename is written to the buffer. However, the check for whether the content-\u003ename actually fits also uses \u0027len\u0027 rather than the updated buffer length strlen(buf). This allows us to write about \"size\" many bytes beyond the allocated memory. This vulnerability causes programs that use libxml2, such as PHP, to crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-9047"
    },
    {
      "cve": "CVE-2017-9048",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a stack-based buffer overflow. The function xmlSnprintfElementContent in valid.c is supposed to recursively dump the element content definition into a char buffer \u0027buf\u0027 of size \u0027size\u0027. At the end of the routine, the function may strcat two more characters without checking whether the current strlen(buf) + 2 \u003c size. This vulnerability causes programs that use libxml2, such as PHP, to crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-9048"
    },
    {
      "cve": "CVE-2017-9049",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a heap-based buffer over-read in the xmlDictComputeFastKey function in dict.c. This vulnerability causes programs that use libxml2, such as PHP, to crash. This vulnerability exists because of an incomplete fix for libxml2 Bug 759398.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-9049"
    },
    {
      "cve": "CVE-2017-9050",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a heap-based buffer over-read in the xmlDictAddString function in dict.c. This vulnerability causes programs that use libxml2, such as PHP, to crash. This vulnerability exists because of an incomplete fix for CVE-2016-1839.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-9050"
    },
    {
      "cve": "CVE-2017-16931",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "parser.c in libxml2 before 2.9.5 mishandles parameter-entity references because the NEXTL macro calls the xmlParserHandlePEReference function in the case of a \u0027%\u0027 character in a DTD name.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-16931"
    },
    {
      "cve": "CVE-2017-16932",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "parser.c in libxml2 before 2.9.5 does not prevent infinite recursion in parameter entities.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-16932"
    },
    {
      "cve": "CVE-2017-17512",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "sensible-browser in sensible-utils before 0.0.11 does not validate strings before launching the program specified by the BROWSER environment variable, which allows remote attackers to conduct argument-injection attacks via a crafted URL, as demonstrated by a --proxy-pac-file argument.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-17512"
    },
    {
      "cve": "CVE-2017-18258",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The xz_head function in xzlib.c in libxml2 before 2.9.6 allows remote attackers to cause a denial of service (memory consumption) via a crafted LZMA file, because the decoder functionality does not restrict memory usage to what is required for a legitimate file.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-18258"
    },
    {
      "cve": "CVE-2018-0495",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Libgcrypt before 1.7.10 and 1.8.x before 1.8.3 allows a memory-cache side-channel attack on ECDSA signatures that can be mitigated through the use of blinding during the signing process in the _gcry_ecc_ecdsa_sign function in cipher/ecc-ecdsa.c, aka the Return Of the Hidden Number Problem or ROHNP. To discover an ECDSA key, the attacker needs access to either the local machine or a different virtual machine on the same physical host.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-0495"
    },
    {
      "cve": "CVE-2018-12886",
      "cwe": {
        "id": "CWE-209",
        "name": "Generation of Error Message Containing Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "stack_protect_prologue in cfgexpand.c and stack_protect_epilogue in function.c in GNU Compiler Collection (GCC) 4.1 through 8 (under certain circumstances) generate instruction sequences when targeting ARM targets that spill the address of the stack protector guard, which allows an attacker to bypass the protection of -fstack-protector, -fstack-protector-all, -fstack-protector-strong, and -fstack-protector-explicit against stack overflow by controlling what the stack canary is compared against.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-12886"
    },
    {
      "cve": "CVE-2018-14404",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference vulnerability exists in the xpath.c:xmlXPathCompOpEval() function of libxml2 through 2.9.8 when parsing an invalid XPath expression in the XPATH_OP_AND or XPATH_OP_OR case. Applications processing untrusted XSL format inputs with the use of the libxml2 library may be vulnerable to a denial of service attack due to a crash of the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-14404"
    },
    {
      "cve": "CVE-2018-14567",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 2.9.8, if --with-lzma is used, allows remote attackers to cause a denial of service (infinite loop) via a crafted XML file that triggers LZMA_MEMLIMIT_ERROR, as demonstrated by xmllint, a different vulnerability than CVE-2015-8035 and CVE-2018-9251.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-14567"
    },
    {
      "cve": "CVE-2018-18928",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "International Components for Unicode (ICU) for C/C++ 63.1 has an integer overflow in number::impl::DecimalQuantity::toScientificString() in i18n/number_decimalquantity.cpp.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-18928"
    },
    {
      "cve": "CVE-2018-19591",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the GNU C Library (aka glibc or libc6) through 2.28, attempting to resolve a crafted hostname via getaddrinfo() leads to the allocation of a socket descriptor that is not closed. This is related to the if_nametoindex() function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-19591"
    },
    {
      "cve": "CVE-2018-20482",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU Tar through 1.30, when --sparse is used, mishandles file shrinkage during read access, which allows local users to cause a denial of service (infinite read loop in sparse_dump_region in sparse.c) by modifying a file that is supposed to be archived by a different user\u0027s process (e.g., a system backup running as root).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-20482"
    },
    {
      "cve": "CVE-2018-20843",
      "cwe": {
        "id": "CWE-611",
        "name": "Improper Restriction of XML External Entity Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libexpat in Expat before 2.2.7, XML input including XML names that contain a large number of colons could make the XML parser consume a high amount of RAM and CPU resources while processing (enough to be usable for denial-of-service attacks).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-20843"
    },
    {
      "cve": "CVE-2018-25032",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "zlib before 1.2.12 allows memory corruption when deflating (i.e., when compressing) if the input has many distant matches.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-25032"
    },
    {
      "cve": "CVE-2019-3855",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow flaw which could lead to an out of bounds write was discovered in libssh2 before 1.8.1 in the way packets are read from the server. A remote attacker who compromises a SSH server may be able to execute code on the client system when a user connects to the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3855"
    },
    {
      "cve": "CVE-2019-3856",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow flaw, which could lead to an out of bounds write, was discovered in libssh2 before 1.8.1 in the way keyboard prompt requests are parsed. A remote attacker who compromises a SSH server may be able to execute code on the client system when a user connects to the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3856"
    },
    {
      "cve": "CVE-2019-3857",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow flaw which could lead to an out of bounds write was discovered in libssh2 before 1.8.1 in the way SSH_MSG_CHANNEL_REQUEST packets with an exit signal are parsed. A remote attacker who compromises a SSH server may be able to execute code on the client system when a user connects to the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3857"
    },
    {
      "cve": "CVE-2019-3858",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 when a specially crafted SFTP packet is received from the server. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3858"
    },
    {
      "cve": "CVE-2019-3859",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the _libssh2_packet_require and _libssh2_packet_requirev functions. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3859"
    },
    {
      "cve": "CVE-2019-3860",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the way SFTP packets with empty payloads are parsed. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3860"
    },
    {
      "cve": "CVE-2019-3861",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the way SSH packets with a padding length value greater than the packet length are parsed. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3861"
    },
    {
      "cve": "CVE-2019-3862",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the way SSH_MSG_CHANNEL_REQUEST packets with an exit status message and no payload are parsed. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3862"
    },
    {
      "cve": "CVE-2019-3863",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in libssh2 before 1.8.1. A server could send a multiple keyboard interactive response messages whose total length are greater than unsigned char max characters. This value is used as an index to copy memory causing in an out of bounds memory write error.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3863"
    },
    {
      "cve": "CVE-2019-5018",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An exploitable use after free vulnerability exists in the window function functionality of Sqlite3 3.26.0. A specially crafted SQL command can cause a use after free vulnerability, potentially resulting in remote code execution. An attacker can send a malicious SQL command to trigger this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-5018"
    },
    {
      "cve": "CVE-2019-5094",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An exploitable code execution vulnerability exists in the quota file functionality of E2fsprogs 1.45.3. A specially crafted ext4 partition can cause an out-of-bounds write on the heap, resulting in code execution. An attacker can corrupt a partition to trigger this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-5094"
    },
    {
      "cve": "CVE-2019-5188",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A code execution vulnerability exists in the directory rehashing functionality of E2fsprogs e2fsck 1.45.4. A specially crafted ext4 directory can cause an out-of-bounds write on the stack, resulting in code execution. An attacker can corrupt a partition to trigger this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-5188"
    },
    {
      "cve": "CVE-2019-5435",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow in curl\u0027s URL API results in a buffer overflow in libcurl 7.62.0 to and including 7.64.1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-5435"
    },
    {
      "cve": "CVE-2019-5436",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap buffer overflow in the TFTP receiving code allows for DoS or arbitrary code execution in libcurl versions 7.19.4 through 7.64.1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-5436"
    },
    {
      "cve": "CVE-2019-5443",
      "cwe": {
        "id": "CWE-427",
        "name": "Uncontrolled Search Path Element"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A non-privileged user or program can put code and a config file in a known non-privileged path (under C:/usr/local/) that will make curl \u003c= 7.65.1 automatically run the code (as an openssl \"engine\") on invocation. If that curl is invoked by a privileged user it can do anything it wants.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-5443"
    },
    {
      "cve": "CVE-2019-5481",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Double-free vulnerability in the FTP-kerberos code in cURL 7.52.0 to 7.65.3.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-5481"
    },
    {
      "cve": "CVE-2019-5482",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Heap buffer overflow in the TFTP protocol handler in cURL 7.19.4 to 7.65.3.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-5482"
    },
    {
      "cve": "CVE-2019-6109",
      "cwe": {
        "id": "CWE-116",
        "name": "Improper Encoding or Escaping of Output"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in OpenSSH 7.9. Due to missing character encoding in the progress display, a malicious server (or Man-in-The-Middle attacker) can employ crafted object names to manipulate the client output, e.g., by using ANSI control codes to hide additional files being transferred. This affects refresh_progress_meter() in progressmeter.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-6109"
    },
    {
      "cve": "CVE-2019-6110",
      "cwe": {
        "id": "CWE-838",
        "name": "Inappropriate Encoding for Output Context"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In OpenSSH 7.9, due to accepting and displaying arbitrary stderr output from the server, a malicious server (or Man-in-The-Middle attacker) can manipulate the client output, for example to use ANSI control codes to hide additional files being transferred.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-6110"
    },
    {
      "cve": "CVE-2019-6111",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in OpenSSH 7.9. Due to the scp implementation being derived from 1983 rcp, the server chooses which files/directories are sent to the client. However, the scp client only performs cursory validation of the object name returned (only directory traversal attacks are prevented). A malicious scp server (or Man-in-The-Middle attacker) can overwrite arbitrary files in the scp client target directory. If recursive operation (-r) is performed, the server can manipulate subdirectories as well (for example, to overwrite the .ssh/authorized_keys file).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-6111"
    },
    {
      "cve": "CVE-2019-6488",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The string component in the GNU C Library (aka glibc or libc6) through 2.28, when running on the x32 architecture, incorrectly attempts to use a 64-bit register for size_t in assembly codes, which can lead to a segmentation fault or possibly unspecified other impact, as demonstrated by a crash in __memmove_avx_unaligned_erms in sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S during a memcpy.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-6488"
    },
    {
      "cve": "CVE-2019-7309",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the GNU C Library (aka glibc or libc6) through 2.29, the memcmp function for the x32 architecture can incorrectly return zero (indicating that the inputs are equal) because the RDX most significant bit is mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-7309"
    },
    {
      "cve": "CVE-2019-8457",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite3 from 3.6.0 to and including 3.27.2 is vulnerable to heap out-of-bound read in the rtreenode() function when handling invalid rtree tables.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-8457"
    },
    {
      "cve": "CVE-2019-9169",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the GNU C Library (aka glibc or libc6) through 2.29, proceed_next_node in posix/regexec.c has a heap-based buffer over-read via an attempted case-insensitive regular-expression match.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9169"
    },
    {
      "cve": "CVE-2019-9636",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Python 2.7.x through 2.7.16 and 3.x through 3.7.2 is affected by: Improper Handling of Unicode Encoding (with an incorrect netloc) during NFKC normalization. The impact is: Information disclosure (credentials, cookies, etc. that are cached against a given hostname). The components are: urllib.parse.urlsplit, urllib.parse.urlparse. The attack vector is: A specially crafted URL could be incorrectly parsed to locate cookies or authentication data and send that information to a different host than when parsed correctly. This is fixed in: v2.7.17, v2.7.17rc1, v2.7.18, v2.7.18rc1; v3.5.10, v3.5.10rc1, v3.5.7, v3.5.8, v3.5.8rc1, v3.5.8rc2, v3.5.9; v3.6.10, v3.6.10rc1, v3.6.11, v3.6.11rc1, v3.6.12, v3.6.9, v3.6.9rc1; v3.7.3, v3.7.3rc1, v3.7.4, v3.7.4rc1, v3.7.4rc2, v3.7.5, v3.7.5rc1, v3.7.6, v3.7.6rc1, v3.7.7, v3.7.7rc1, v3.7.8, v3.7.8rc1, v3.7.9.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9636"
    },
    {
      "cve": "CVE-2019-9674",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Lib/zipfile.py in Python through 3.7.2 allows remote attackers to cause a denial of service (resource consumption) via a ZIP bomb.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9674"
    },
    {
      "cve": "CVE-2019-9740",
      "cwe": {
        "id": "CWE-93",
        "name": "Improper Neutralization of CRLF Sequences (\u0027CRLF Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in urllib2 in Python 2.x through 2.7.16 and urllib in Python 3.x through 3.7.3. CRLF injection is possible if the attacker controls a url parameter, as demonstrated by the first argument to urllib.request.urlopen with \\r\\n (specifically in the query string after a ? character) followed by an HTTP header or a Redis command. This is fixed in: v2.7.17, v2.7.17rc1, v2.7.18, v2.7.18rc1; v3.5.10, v3.5.10rc1, v3.5.8, v3.5.8rc1, v3.5.8rc2, v3.5.9; v3.6.10, v3.6.10rc1, v3.6.11, v3.6.11rc1, v3.6.12, v3.6.9, v3.6.9rc1; v3.7.4, v3.7.4rc1, v3.7.4rc2, v3.7.5, v3.7.5rc1, v3.7.6, v3.7.6rc1, v3.7.7, v3.7.7rc1, v3.7.8, v3.7.8rc1, v3.7.9.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9740"
    },
    {
      "cve": "CVE-2019-9923",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "pax_decode_header in sparse.c in GNU Tar before 1.32 had a NULL pointer dereference when parsing certain archives that have malformed extended headers.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9923"
    },
    {
      "cve": "CVE-2019-9936",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.27.2, running fts5 prefix queries inside a transaction could trigger a heap-based buffer over-read in fts5HashEntrySort in sqlite3.c, which may lead to an information leak. This is related to ext/fts5/fts5_hash.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9936"
    },
    {
      "cve": "CVE-2019-9937",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.27.2, interleaving reads and writes in a single transaction with an fts5 virtual table will lead to a NULL Pointer Dereference in fts5ChunkIterate in sqlite3.c. This is related to ext/fts5/fts5_hash.c and ext/fts5/fts5_index.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9937"
    },
    {
      "cve": "CVE-2019-9947",
      "cwe": {
        "id": "CWE-93",
        "name": "Improper Neutralization of CRLF Sequences (\u0027CRLF Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in urllib2 in Python 2.x through 2.7.16 and urllib in Python 3.x through 3.7.3. CRLF injection is possible if the attacker controls a url parameter, as demonstrated by the first argument to urllib.request.urlopen with \\r\\n (specifically in the path component of a URL that lacks a ? character) followed by an HTTP header or a Redis command. This is similar to the CVE-2019-9740 query string issue. This is fixed in: v2.7.17, v2.7.17rc1, v2.7.18, v2.7.18rc1; v3.5.10, v3.5.10rc1, v3.5.8, v3.5.8rc1, v3.5.8rc2, v3.5.9; v3.6.10, v3.6.10rc1, v3.6.11, v3.6.11rc1, v3.6.12, v3.6.9, v3.6.9rc1; v3.7.4, v3.7.4rc1, v3.7.4rc2, v3.7.5, v3.7.5rc1, v3.7.6, v3.7.6rc1, v3.7.7, v3.7.7rc1, v3.7.8, v3.7.8rc1, v3.7.9.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9947"
    },
    {
      "cve": "CVE-2019-9948",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "urllib in Python 2.x through 2.7.16 supports the local_file: scheme, which makes it easier for remote attackers to bypass protection mechanisms that blacklist file: URIs, as demonstrated by triggering a urllib.urlopen(\u0027local_file:///etc/passwd\u0027) call.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9948"
    },
    {
      "cve": "CVE-2019-10160",
      "cwe": {
        "id": "CWE-172",
        "name": "Encoding Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security regression of CVE-2019-9636 was discovered in python since commit d537ab0ff9767ef024f26246899728f0116b1ec3 affecting versions 2.7, 3.5, 3.6, 3.7 and from v3.8.0a4 through v3.8.0b1, which still allows an attacker to exploit CVE-2019-9636 by abusing the user and password parts of a URL. When an application parses user-supplied URLs to store cookies, authentication credentials, or other kind of information, it is possible for an attacker to provide specially crafted URLs to make the application locate host-related information (e.g. cookies, authentication data) and send them to a different host than where it should, unlike if the URLs had been correctly parsed. The result of an attack may vary based on the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-10160"
    },
    {
      "cve": "CVE-2019-11360",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A buffer overflow in iptables-restore in netfilter iptables 1.8.2 allows an attacker to (at least) crash the program or potentially gain code execution via a specially crafted iptables-save file. This is related to add_param_to_argv in xshared.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.2,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-11360"
    },
    {
      "cve": "CVE-2019-12290",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU libidn2 before 2.2.0 fails to perform the roundtrip checks specified in RFC3490 Section 4.2 when converting A-labels to U-labels. This makes it possible in some circumstances for one domain to impersonate another. By creating a malicious domain that matches a target domain except for the inclusion of certain punycoded Unicode characters (that would be discarded when converted first to a Unicode label and then back to an ASCII label), arbitrary domains can be impersonated.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-12290"
    },
    {
      "cve": "CVE-2019-12900",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "BZ2_decompress in decompress.c in bzip2 through 1.0.6 has an out-of-bounds write when there are many selectors.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-12900"
    },
    {
      "cve": "CVE-2019-12904",
      "cwe": {
        "id": "CWE-668",
        "name": "Exposure of Resource to Wrong Sphere"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Libgcrypt 1.8.4, the C implementation of AES is vulnerable to a flush-and-reload side-channel attack because physical addresses are available to other processes. (The C implementation is used on platforms where an assembly-language implementation is unavailable.) NOTE: the vendor\u0027s position is that the issue report cannot be validated because there is no description of an attack",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-12904"
    },
    {
      "cve": "CVE-2019-13057",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the server in OpenLDAP before 2.4.48. When the server administrator delegates rootDN (database admin) privileges for certain databases but wants to maintain isolation (e.g., for multi-tenant deployments), slapd does not properly stop a rootDN from requesting authorization as an identity from another database during a SASL bind or with a proxyAuthz (RFC 4370) control. (It is not a common configuration to deploy a system where the server administrator and a DB administrator enjoy different levels of trust.)",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-13057"
    },
    {
      "cve": "CVE-2019-13565",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in OpenLDAP 2.x before 2.4.48. When using SASL authentication and session encryption, and relying on the SASL security layers in slapd access controls, it is possible to obtain access that would otherwise be denied via a simple bind for any identity covered in those ACLs. After the first SASL bind is completed, the sasl_ssf value is retained for all new non-SASL connections. Depending on the ACL configuration, this can affect different types of operations (searches, modifications, etc.). In other words, a successful authorization step completed by one user affects the authorization requirement for a different user.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-13565"
    },
    {
      "cve": "CVE-2019-13627",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "It was discovered that there was a ECDSA timing attack in the libgcrypt20 cryptographic library. Version affected: 1.8.4-5, 1.7.6-2+deb9u3, and 1.6.3-2+deb8u4. Versions fixed: 1.8.5-2 and 1.6.3-2+deb8u7.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-13627"
    },
    {
      "cve": "CVE-2019-15847",
      "cwe": {
        "id": "CWE-331",
        "name": "Insufficient Entropy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The POWER9 backend in GNU Compiler Collection (GCC) before version 10 could optimize multiple calls of the __builtin_darn intrinsic into a single call, thus reducing the entropy of the random number generator. This occurred because a volatile operation was not specified. For example, within a single execution of a program, the output of every __builtin_darn() call may be the same.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-15847"
    },
    {
      "cve": "CVE-2019-15903",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libexpat before 2.2.8, crafted XML input could fool the parser into changing from DTD parsing to document parsing too early; a consecutive call to XML_GetCurrentLineNumber (or XML_GetCurrentColumnNumber) then resulted in a heap-based buffer over-read.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-15903"
    },
    {
      "cve": "CVE-2019-16056",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in Python through 2.7.16, 3.x through 3.5.7, 3.6.x through 3.6.9, and 3.7.x through 3.7.4. The email module wrongly parses email addresses that contain multiple @ characters. An application that uses the email module and implements some kind of checks on the From/To headers of a message could be tricked into accepting an email address that should be denied. An attack may be the same as in CVE-2019-11340; however, this CVE applies to Python more generally.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-16056"
    },
    {
      "cve": "CVE-2019-16168",
      "cwe": {
        "id": "CWE-369",
        "name": "Divide By Zero"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite through 3.29.0, whereLoopAddBtreeIndex in sqlite3.c can crash a browser or other application because of missing validation of a sqlite_stat1 sz field, aka a \"severe division by zero in the query planner.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-16168"
    },
    {
      "cve": "CVE-2019-16905",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "OpenSSH 7.7 through 7.9 and 8.x before 8.1, when compiled with an experimental key type, has a pre-authentication integer overflow if a client or server is configured to use a crafted XMSS key. This leads to memory corruption and local code execution because of an error in the XMSS key parsing algorithm. NOTE: the XMSS implementation is considered experimental in all released OpenSSH versions, and there is no supported way to enable it when building portable OpenSSH.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-16905"
    },
    {
      "cve": "CVE-2019-17498",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libssh2 v1.9.0 and earlier versions, the SSH_MSG_DISCONNECT logic in packet.c has an integer overflow in a bounds check, enabling an attacker to specify an arbitrary (out-of-bounds) offset for a subsequent memory read. A crafted SSH server may be able to disclose sensitive information or cause a denial of service condition on the client system when a user connects to the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-17498"
    },
    {
      "cve": "CVE-2019-17543",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "LZ4 before 1.9.2 has a heap-based buffer overflow in LZ4_write32 (related to LZ4_compress_destSize), affecting applications that call LZ4_compress_fast with a large input. (This issue can also lead to data corruption.) NOTE: the vendor states \"only a few specific / uncommon usages of the API are at risk.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-17543"
    },
    {
      "cve": "CVE-2019-17594",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a heap-based buffer over-read in the _nc_find_entry function in tinfo/comp_hash.c in the terminfo library in ncurses before 6.1-20191012.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-17594"
    },
    {
      "cve": "CVE-2019-17595",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a heap-based buffer over-read in the fmt_entry function in tinfo/comp_hash.c in the terminfo library in ncurses before 6.1-20191012.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:L/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-17595"
    },
    {
      "cve": "CVE-2019-18224",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "idn2_to_ascii_4i in lib/lookup.c in GNU libidn2 before 2.1.1 has a heap-based buffer overflow via a long domain string.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-18224"
    },
    {
      "cve": "CVE-2019-18276",
      "cwe": {
        "id": "CWE-273",
        "name": "Improper Check for Dropped Privileges"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in disable_priv_mode in shell.c in GNU Bash through 5.0 patch 11. By default, if Bash is run with its effective UID not equal to its real UID, it will drop privileges by setting its effective UID to its real UID. However, it does so incorrectly. On Linux and other systems that support \"saved UID\" functionality, the saved UID is not dropped. An attacker with command execution in the shell can use \"enable -f\" for runtime loading of a new builtin, which can be a shared object that calls setuid() and therefore regains privileges. However, binaries running with an effective UID of 0 are unaffected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-18276"
    },
    {
      "cve": "CVE-2019-18348",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in urllib2 in Python 2.x through 2.7.17 and urllib in Python 3.x through 3.8.0. CRLF injection is possible if the attacker controls a url parameter, as demonstrated by the first argument to urllib.request.urlopen with \\r\\n (specifically in the host component of a URL) followed by an HTTP header. This is similar to the CVE-2019-9740 query string issue and the CVE-2019-9947 path string issue. (This is not exploitable when glibc has CVE-2016-10739 fixed.). This is fixed in: v2.7.18, v2.7.18rc1; v3.5.10, v3.5.10rc1; v3.6.11, v3.6.11rc1, v3.6.12; v3.7.8, v3.7.8rc1, v3.7.9; v3.8.3, v3.8.3rc1, v3.8.4, v3.8.4rc1, v3.8.5, v3.8.6, v3.8.6rc1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-18348"
    },
    {
      "cve": "CVE-2019-19126",
      "cwe": {
        "id": "CWE-665",
        "name": "Improper Initialization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "On the x86-64 architecture, the GNU C Library (aka glibc) before 2.31 fails to ignore the LD_PREFER_MAP_32BIT_EXEC environment variable during program execution after a security transition, allowing local attackers to restrict the possible mapping addresses for loaded libraries and thus bypass ASLR for a setuid program.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19126"
    },
    {
      "cve": "CVE-2019-19242",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 3.30.1 mishandles pExpr-\u003ey.pTab, as demonstrated by the TK_COLUMN case in sqlite3ExprCodeTarget in expr.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19242"
    },
    {
      "cve": "CVE-2019-19244",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Select in select.c in SQLite 3.30.1 allows a crash if a sub-select uses both DISTINCT and window functions, and also has certain ORDER BY usage.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19244"
    },
    {
      "cve": "CVE-2019-19317",
      "cwe": {
        "id": "CWE-681",
        "name": "Incorrect Conversion between Numeric Types"
      },
      "notes": [
        {
          "category": "summary",
          "text": "lookupName in resolve.c in SQLite 3.30.1 omits bits from the colUsed bitmask in the case of a generated column, which allows attackers to cause a denial of service or possibly have unspecified other impact.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19317"
    },
    {
      "cve": "CVE-2019-19603",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 3.30.1 mishandles certain SELECT statements with a nonexistent VIEW, leading to an application crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19603"
    },
    {
      "cve": "CVE-2019-19645",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "alter.c in SQLite through 3.30.1 allows attackers to trigger infinite recursion via certain types of self-referential views in conjunction with ALTER TABLE statements.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19645"
    },
    {
      "cve": "CVE-2019-19646",
      "cwe": {
        "id": "CWE-754",
        "name": "Improper Check for Unusual or Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "pragma.c in SQLite through 3.30.1 mishandles NOT NULL in an integrity_check PRAGMA command in certain cases of generated columns.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19646"
    },
    {
      "cve": "CVE-2019-19880",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "exprListAppendList in window.c in SQLite 3.30.1 allows attackers to trigger an invalid pointer dereference because constant integer values in ORDER BY clauses of window definitions are mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19880"
    },
    {
      "cve": "CVE-2019-19906",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "cyrus-sasl (aka Cyrus SASL) 2.1.27 has an out-of-bounds write leading to unauthenticated remote denial-of-service in OpenLDAP via a malformed LDAP packet. The OpenLDAP crash is ultimately caused by an off-by-one error in _sasl_add_string in common.c in cyrus-sasl.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19906"
    },
    {
      "cve": "CVE-2019-19923",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "flattenSubquery in select.c in SQLite 3.30.1 mishandles certain uses of SELECT DISTINCT involving a LEFT JOIN in which the right-hand side is a view. This can cause a NULL pointer dereference (or incorrect results).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19923"
    },
    {
      "cve": "CVE-2019-19924",
      "cwe": {
        "id": "CWE-755",
        "name": "Improper Handling of Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 3.30.1 mishandles certain parser-tree rewriting, related to expr.c, vdbeaux.c, and window.c. This is caused by incorrect sqlite3WindowRewrite() error handling.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19924"
    },
    {
      "cve": "CVE-2019-19925",
      "cwe": {
        "id": "CWE-434",
        "name": "Unrestricted Upload of File with Dangerous Type"
      },
      "notes": [
        {
          "category": "summary",
          "text": "zipfileUpdate in ext/misc/zipfile.c in SQLite 3.30.1 mishandles a NULL pathname during an update of a ZIP archive.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19925"
    },
    {
      "cve": "CVE-2019-19926",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "multiSelect in select.c in SQLite 3.30.1 mishandles certain errors during parsing, as demonstrated by errors from sqlite3WindowRewrite() calls. NOTE: this vulnerability exists because of an incomplete fix for CVE-2019-19880.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19926"
    },
    {
      "cve": "CVE-2019-19956",
      "cwe": {
        "id": "CWE-772",
        "name": "Missing Release of Resource after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmlParseBalancedChunkMemoryRecover in parser.c in libxml2 before 2.9.10 has a memory leak related to newDoc-\u003eoldNs.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19956"
    },
    {
      "cve": "CVE-2019-19959",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ext/misc/zipfile.c in SQLite 3.30.1 mishandles certain uses of INSERT INTO in situations involving embedded \u0027\\0\u0027 characters in filenames, leading to a memory-management error that can be detected by (for example) valgrind.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19959"
    },
    {
      "cve": "CVE-2019-20218",
      "cwe": {
        "id": "CWE-755",
        "name": "Improper Handling of Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "selectExpander in select.c in SQLite 3.30.1 proceeds with WITH stack unwinding even after a parsing error.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-20218"
    },
    {
      "cve": "CVE-2019-20367",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nlist.c in libbsd before 0.10.0 has an out-of-bounds read during a comparison for a symbol name from the string table (strtab).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-20367"
    },
    {
      "cve": "CVE-2019-20388",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmlSchemaPreRun in xmlschemas.c in libxml2 2.9.10 allows an xmlSchemaValidateStream memory leak.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-20388"
    },
    {
      "cve": "CVE-2019-20795",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "iproute2 before 5.1.0 has a use-after-free in get_netnsid_from_name in ip/ipnetns.c. NOTE: security relevance may be limited to certain uses of setuid that, although not a default, are sometimes a configuration option offered to end users. Even when setuid is used, other factors (such as C library configuration) may block exploitability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-20795"
    },
    {
      "cve": "CVE-2019-20907",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Lib/tarfile.py in Python through 3.8.3, an attacker is able to craft a TAR archive leading to an infinite loop when opened by tarfile.open, because _proc_pax lacks header validation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-20907"
    },
    {
      "cve": "CVE-2019-25013",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv feature in the GNU C Library (aka glibc or libc6) through 2.32, when processing invalid multi-byte input sequences in the EUC-KR encoding, may have a buffer over-read.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-25013"
    },
    {
      "cve": "CVE-2019-1010022",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** GNU Libc current is affected by: Mitigation bypass. The impact is: Attacker may bypass stack guard protection. The component is: nptl. The attack vector is: Exploit stack buffer overflow vulnerability and use this bypass vulnerability to bypass stack guard. NOTE: Upstream comments indicate \"this is being treated as a non-security bug and no real threat.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-1010022"
    },
    {
      "cve": "CVE-2019-1010023",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** GNU Libc current is affected by: Re-mapping current loaded library with malicious ELF file. The impact is: In worst case attacker may evaluate privileges. The component is: libld. The attack vector is: Attacker sends 2 ELF files to victim and asks to run ldd on it. ldd execute code. NOTE: Upstream comments indicate \"this is being treated as a non-security bug and no real threat.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-1010023"
    },
    {
      "cve": "CVE-2019-1010024",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** GNU Libc current is affected by: Mitigation bypass. The impact is: Attacker may bypass ASLR using cache of thread stack and heap. The component is: glibc. NOTE: Upstream comments indicate \"this is being treated as a non-security bug and no real threat.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-1010024"
    },
    {
      "cve": "CVE-2019-1010025",
      "cwe": {
        "id": "CWE-330",
        "name": "Use of Insufficiently Random Values"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** GNU Libc current is affected by: Mitigation bypass. The impact is: Attacker may guess the heap addresses of pthread_created thread. The component is: glibc. NOTE: the vendor\u0027s position is \"ASLR bypass itself is not a vulnerability.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-1010025"
    },
    {
      "cve": "CVE-2019-1010180",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU gdb All versions is affected by: Buffer Overflow - Out of bound memory access. The impact is: Deny of Service, Memory Disclosure, and Possible Code Execution. The component is: The main gdb module. The attack vector is: Open an ELF for debugging. The fixed version is: Not fixed yet.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-1010180"
    },
    {
      "cve": "CVE-2020-1712",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap use-after-free vulnerability was found in systemd before version v245-rc1, where asynchronous Polkit queries are performed while handling dbus messages. A local unprivileged attacker can abuse this flaw to crash systemd services or potentially execute code and elevate their privileges, by sending specially crafted dbus messages.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-1712"
    },
    {
      "cve": "CVE-2020-1751",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds write vulnerability was found in glibc before 2.31 when handling signal trampolines on PowerPC. Specifically, the backtrace function did not properly check the array bounds when storing the frame address, resulting in a denial of service or potential code execution. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-1751"
    },
    {
      "cve": "CVE-2020-1752",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability introduced in glibc upstream version 2.14 was found in the way the tilde expansion was carried out. Directory paths containing an initial tilde followed by a valid username were affected by this issue. A local attacker could exploit this flaw by creating a specially crafted path that, when processed by the glob function, would potentially lead to arbitrary code execution. This was fixed in version 2.32.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-1752"
    },
    {
      "cve": "CVE-2020-6096",
      "cwe": {
        "id": "CWE-195",
        "name": "Signed to Unsigned Conversion Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An exploitable signed comparison vulnerability exists in the ARMv7 memcpy() implementation of GNU glibc 2.30.9000. Calling memcpy() (on ARMv7 targets that utilize the GNU glibc implementation) with a negative value for the \u0027num\u0027 parameter results in a signed comparison vulnerability. If an attacker underflows the \u0027num\u0027 parameter to memcpy(), this vulnerability could lead to undefined behavior such as writing to out-of-bounds memory and potentially remote code execution. Furthermore, this memcpy() implementation allows for program execution to continue in scenarios where a segmentation fault or crash should have occurred. The dangers occur in that subsequent execution and iterations of this code will be executed with this corrupted data.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-6096"
    },
    {
      "cve": "CVE-2020-7595",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmlStringLenDecodeEntities in parser.c in libxml2 2.9.10 has an infinite loop in a certain end-of-file situation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-7595"
    },
    {
      "cve": "CVE-2020-8169",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The libcurl library versions 7.62.0 to and including  7.70.0 are vulnerable to an information disclosure vulnerability that can lead to a partial password being leaked over the network and to the DNS server(s).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-8169"
    },
    {
      "cve": "CVE-2020-8177",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.20.0 through 7.70.0 is vulnerable to improper restriction of names for files and other resources that can lead too overwriting a local file when the -J flag is used.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-8177"
    },
    {
      "cve": "CVE-2020-8231",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Due to use of a dangling pointer, libcurl 7.29.0 through 7.71.1 can use the wrong connection when sending data.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-8231"
    },
    {
      "cve": "CVE-2020-8284",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A malicious server can use the FTP PASV response to trick curl 7.73.0 and earlier into connecting back to a given IP address and port, and this way potentially make curl extract information about services that are otherwise private and not disclosed, for example doing port scanning and service banner extractions.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-8284"
    },
    {
      "cve": "CVE-2020-8285",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.21.0 to and including 7.73.0 is vulnerable to uncontrolled recursion due to a stack overflow issue in FTP wildcard match parsing.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-8285"
    },
    {
      "cve": "CVE-2020-8286",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The libcurl library versions 7.41.0 to and including  7.73.0 are vulnerable to an improper check for certificate revocation due to insufficient verification of the OCSP response. This vulnerability could allow an attacker to pass a revoked certificate as valid.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-8286"
    },
    {
      "cve": "CVE-2020-8315",
      "cwe": {
        "id": "CWE-427",
        "name": "Uncontrolled Search Path Element"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python (CPython) 3.6 through 3.6.10, 3.7 through 3.7.6, and 3.8 through 3.8.1, an insecure dependency load upon launch on Windows 7 may result in an attacker\u0027s copy of api-ms-win-core-path-l1-1-0.dll being loaded and used instead of the system\u0027s copy. Windows 8 and later are unaffected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-8315"
    },
    {
      "cve": "CVE-2020-8492",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Python 2.7 through 2.7.17, 3.5 through 3.5.9, 3.6 through 3.6.10, 3.7 through 3.7.6, and 3.8 through 3.8.1 allows an HTTP server to conduct Regular Expression Denial of Service (ReDoS) attacks against a client because of urllib.request.AbstractBasicAuthHandler catastrophic backtracking.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-8492"
    },
    {
      "cve": "CVE-2020-9327",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.31.1, isAuxiliaryVtabOperator allows attackers to trigger a NULL pointer dereference and segmentation fault because of generated column optimizations.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-9327"
    },
    {
      "cve": "CVE-2020-10029",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The GNU C Library (aka glibc or libc6) before 2.32 could overflow an on-stack buffer during range reduction if an input to an 80-bit long double function contains a non-canonical bit pattern, a seen when passing a 0x5d414141414141410000 value to sinl on x86 targets. This is related to sysdeps/ieee754/ldbl-96/e_rem_pio2l.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-10029"
    },
    {
      "cve": "CVE-2020-10531",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in International Components for Unicode (ICU) for C/C++ through 66.1. An integer overflow, leading to a heap-based buffer overflow, exists in the UnicodeString::doAppend() function in common/unistr.cpp.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-10531"
    },
    {
      "cve": "CVE-2020-10543",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Perl before 5.30.3 on 32-bit platforms allows a heap-based buffer overflow because nested regular expression quantifiers have an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-10543"
    },
    {
      "cve": "CVE-2020-10735",
      "cwe": {
        "id": "CWE-704",
        "name": "Incorrect Type Conversion or Cast"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in python. In algorithms with quadratic time complexity using non-binary bases, when using int(\"text\"), a system could take 50ms to parse an int string with 100,000 digits and 5s for 1,000,000 digits (float, decimal, int.from_bytes(), and int() for binary bases 2, 4, 8, 16, and 32 are not affected). The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-10735"
    },
    {
      "cve": "CVE-2020-10878",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Perl before 5.30.3 has an integer overflow related to mishandling of a \"PL_regkind[OP(n)] == NOTHING\" situation. A crafted regular expression could lead to malformed bytecode with a possibility of instruction injection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-10878"
    },
    {
      "cve": "CVE-2020-11501",
      "cwe": {
        "id": "CWE-330",
        "name": "Use of Insufficiently Random Values"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GnuTLS 3.6.x before 3.6.13 uses incorrect cryptography for DTLS. The earliest affected version is 3.6.3 (2018-07-16) because of an error in a 2017-10-06 commit. The DTLS client always uses 32 \u0027\\0\u0027 bytes instead of a random value, and thus contributes no randomness to a DTLS negotiation. This breaks the security guarantees of the DTLS protocol.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-11501"
    },
    {
      "cve": "CVE-2020-11655",
      "cwe": {
        "id": "CWE-665",
        "name": "Improper Initialization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite through 3.31.1 allows attackers to cause a denial of service (segmentation fault) via a malformed window-function query because the AggInfo object\u0027s initialization is mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-11655"
    },
    {
      "cve": "CVE-2020-11656",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite through 3.31.1, the ALTER TABLE implementation has a use-after-free, as demonstrated by an ORDER BY clause that belongs to a compound SELECT statement.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-11656"
    },
    {
      "cve": "CVE-2020-12062",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The scp client in OpenSSH 8.2 incorrectly sends duplicate responses to the server upon a utimes system call failure, which allows a malicious unprivileged user on the remote server to overwrite arbitrary files in the client\u0027s download directory by creating a crafted subdirectory anywhere on the remote server. The victim must use the command scp -rp to download a file hierarchy containing, anywhere inside, this crafted subdirectory. NOTE: the vendor points out that \"this attack can achieve no more than a hostile peer is already able to achieve within the scp protocol\" and \"utimes does not fail under normal circumstances.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-12062"
    },
    {
      "cve": "CVE-2020-12243",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In filter.c in slapd in OpenLDAP before 2.4.50, LDAP search filters with nested boolean expressions can result in denial of service (daemon crash).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-12243"
    },
    {
      "cve": "CVE-2020-12723",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "regcomp.c in Perl before 5.30.3 allows a buffer overflow via a crafted regular expression because of recursive S_study_chunk calls.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-12723"
    },
    {
      "cve": "CVE-2020-12762",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "json-c through 0.14 has an integer overflow and out-of-bounds write via a large JSON file, as demonstrated by printbuf_memappend.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-12762"
    },
    {
      "cve": "CVE-2020-13434",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite through 3.32.0 has an integer overflow in sqlite3_str_vappendf in printf.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13434"
    },
    {
      "cve": "CVE-2020-13435",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite through 3.32.0 has a segmentation fault in sqlite3ExprCodeTarget in expr.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13435"
    },
    {
      "cve": "CVE-2020-13529",
      "cwe": {
        "id": "CWE-290",
        "name": "Authentication Bypass by Spoofing"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An exploitable denial-of-service vulnerability exists in Systemd 245. A specially crafted DHCP FORCERENEW packet can cause a server running the DHCP client to be vulnerable to a DHCP ACK spoofing attack. An attacker can forge a pair of FORCERENEW and DCHP ACK packets to reconfigure the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:H/PR:N/UI:N/S:C/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13529"
    },
    {
      "cve": "CVE-2020-13630",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ext/fts3/fts3.c in SQLite before 3.32.0 has a use-after-free in fts3EvalNextRow, related to the snippet feature.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13630"
    },
    {
      "cve": "CVE-2020-13631",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite before 3.32.0 allows a virtual table to be renamed to the name of one of its shadow tables, related to alter.c and build.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13631"
    },
    {
      "cve": "CVE-2020-13632",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ext/fts3/fts3_snippet.c in SQLite before 3.32.0 has a NULL pointer dereference via a crafted matchinfo() query.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13632"
    },
    {
      "cve": "CVE-2020-13776",
      "cwe": {
        "id": "CWE-269",
        "name": "Improper Privilege Management"
      },
      "notes": [
        {
          "category": "summary",
          "text": "systemd through v245 mishandles numerical usernames such as ones composed of decimal digits or 0x followed by hex digits, as demonstrated by use of root privileges when privileges of the 0x0 user account were intended. NOTE: this issue exists because of an incomplete fix for CVE-2017-1000082.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13776"
    },
    {
      "cve": "CVE-2020-13777",
      "cwe": {
        "id": "CWE-327",
        "name": "Use of a Broken or Risky Cryptographic Algorithm"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GnuTLS 3.6.x before 3.6.14 uses incorrect cryptography for encrypting a session ticket (a loss of confidentiality in TLS 1.2, and an authentication bypass in TLS 1.3). The earliest affected version is 3.6.4 (2018-09-24) because of an error in a 2018-09-18 commit. Until the first key rotation, the TLS server always uses wrong data in place of an encryption key derived from an application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13777"
    },
    {
      "cve": "CVE-2020-13871",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 3.32.2 has a use-after-free in resetAccumulator in select.c because the parse tree rewrite for window functions is too late.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13871"
    },
    {
      "cve": "CVE-2020-14145",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The client side in OpenSSH 5.7 through 8.4 has an Observable Discrepancy leading to an information leak in the algorithm negotiation. This allows man-in-the-middle attackers to target initial connection attempts (where no host key for the server has been cached by the client). NOTE: some reports state that 8.5 and 8.6 are also affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-14145"
    },
    {
      "cve": "CVE-2020-14422",
      "cwe": {
        "id": "CWE-682",
        "name": "Incorrect Calculation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Lib/ipaddress.py in Python through 3.8.3 improperly computes hash values in the IPv4Interface and IPv6Interface classes, which might allow a remote attacker to cause a denial of service if an application is affected by the performance of a dictionary containing IPv4Interface or IPv6Interface objects, and this attacker can cause many dictionary entries to be created. This is fixed in: v3.5.10, v3.5.10rc1; v3.6.12; v3.7.9; v3.8.4, v3.8.4rc1, v3.8.5, v3.8.6, v3.8.6rc1; v3.9.0, v3.9.0b4, v3.9.0b5, v3.9.0rc1, v3.9.0rc2.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-14422"
    },
    {
      "cve": "CVE-2020-15358",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite before 3.32.3, select.c mishandles query-flattener optimization, leading to a multiSelectOrderBy heap overflow because of misuse of transitive properties for constant propagation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-15358"
    },
    {
      "cve": "CVE-2020-15523",
      "cwe": {
        "id": "CWE-427",
        "name": "Uncontrolled Search Path Element"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python 3.6 through 3.6.10, 3.7 through 3.7.8, 3.8 through 3.8.4rc1, and 3.9 through 3.9.0b4 on Windows, a Trojan horse python3.dll might be used in cases where CPython is embedded in a native application. This occurs because python3X.dll may use an invalid search path for python3.dll loading (after Py_SetPath has been used). NOTE: this issue CANNOT occur when using python.exe from a standard (non-embedded) Python installation on Windows.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-15523"
    },
    {
      "cve": "CVE-2020-15778",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "scp in OpenSSH through 8.3p1 allows command injection in the scp.c toremote function, as demonstrated by backtick characters in the destination argument. NOTE: the vendor reportedly has stated that they intentionally omit validation of \"anomalous argument transfers\" because that could \"stand a great chance of breaking existing workflows.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-15778"
    },
    {
      "cve": "CVE-2020-15801",
      "cwe": {
        "id": "CWE-426",
        "name": "Untrusted Search Path"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python 3.8.4, sys.path restrictions specified in a python38._pth file are ignored, allowing code to be loaded from arbitrary locations. The \u003cexecutable-name\u003e._pth file (e.g., the python._pth file) is not affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-15801"
    },
    {
      "cve": "CVE-2020-19185",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in one_one_mapping function in progs/dump_entry.c:1373 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-19185"
    },
    {
      "cve": "CVE-2020-19186",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in _nc_find_entry function in tinfo/comp_hash.c:66 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-19186"
    },
    {
      "cve": "CVE-2020-19187",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in fmt_entry function in progs/dump_entry.c:1100 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-19187"
    },
    {
      "cve": "CVE-2020-19188",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in fmt_entry function in progs/dump_entry.c:1116 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-19188"
    },
    {
      "cve": "CVE-2020-19189",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in postprocess_terminfo function in tinfo/parse_entry.c:997 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-19189"
    },
    {
      "cve": "CVE-2020-19190",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in _nc_find_entry in tinfo/comp_hash.c:70 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-19190"
    },
    {
      "cve": "CVE-2020-19909",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Integer overflow vulnerability in tool_operate.c in curl 7.65.2 via a large value as the retry delay. NOTE: many parties report that this has no direct security impact on the curl user; however, it may (in theory) cause a denial of service to associated systems or networks if, for example, --retry-delay is misinterpreted as a value much smaller than what was intended. This is not especially plausible because the overflow only happens if the user was trying to specify that curl should wait weeks (or longer) before trying to recover from a transient error.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-19909"
    },
    {
      "cve": "CVE-2020-21047",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The libcpu component which is used by libasm of elfutils version 0.177 (git 47780c9e), suffers from denial-of-service vulnerability caused by application crashes due to out-of-bounds write (CWE-787), off-by-one error (CWE-193) and reachable assertion (CWE-617); to exploit the vulnerability, the attackers need to craft certain ELF files which bypass the missing bound checks.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-21047"
    },
    {
      "cve": "CVE-2020-21913",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "International Components for Unicode (ICU-20850) v66.1 was discovered to contain a use after free bug in the pkg_createWithAssemblyCode function in the file tools/pkgdata/pkgdata.cpp.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-21913"
    },
    {
      "cve": "CVE-2020-22218",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in function _libssh2_packet_add in libssh2 1.10.0 allows attackers to access out of bounds memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-22218"
    },
    {
      "cve": "CVE-2020-24659",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in GnuTLS before 3.6.15. A server can trigger a NULL pointer dereference in a TLS 1.3 client if a no_renegotiation alert is sent with unexpected timing, and then an invalid second handshake occurs. The crash happens in the application\u0027s error handling path, where the gnutls_deinit function is called after detecting a handshake failure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-24659"
    },
    {
      "cve": "CVE-2020-24977",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNOME project libxml2 v2.9.10 has a global buffer over-read vulnerability in xmlEncodeEntitiesInternal at libxml2/entities.c. The issue has been fixed in commit 50f06b3e.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-24977"
    },
    {
      "cve": "CVE-2020-25692",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference was found in OpenLDAP server and was fixed in openldap 2.4.55, during a request for renaming RDNs. An unauthenticated attacker could remotely crash the slapd process by sending a specially crafted request, causing a Denial of Service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-25692"
    },
    {
      "cve": "CVE-2020-25709",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in OpenLDAP. This flaw allows an attacker who can send a malicious packet to be processed by OpenLDAP\u2019s slapd server, to trigger an assertion failure. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-25709"
    },
    {
      "cve": "CVE-2020-25710",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in OpenLDAP in versions before 2.4.56. This flaw allows an attacker who sends a malicious packet processed by OpenLDAP to force a failed assertion in csnNormalize23(). The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-25710"
    },
    {
      "cve": "CVE-2020-26116",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "http.client in Python 3.x before 3.5.10, 3.6.x before 3.6.12, 3.7.x before 3.7.9, and 3.8.x before 3.8.5 allows CRLF injection if the attacker controls the HTTP request method, as demonstrated by inserting CR and LF control characters in the first argument of HTTPConnection.request.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-26116"
    },
    {
      "cve": "CVE-2020-27618",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv function in the GNU C Library (aka glibc or libc6) 2.32 and earlier, when processing invalid multi-byte input sequences in IBM1364, IBM1371, IBM1388, IBM1390, and IBM1399 encodings, fails to advance the input state, which could lead to an infinite loop in applications, resulting in a denial of service, a different vulnerability from CVE-2016-10228.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-27618"
    },
    {
      "cve": "CVE-2020-28196",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "MIT Kerberos 5 (aka krb5) before 1.17.2 and 1.18.x before 1.18.3 allows unbounded recursion via an ASN.1-encoded Kerberos message because the lib/krb5/asn.1/asn1_encode.c support for BER indefinite lengths lacks a recursion limit.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-28196"
    },
    {
      "cve": "CVE-2020-29361",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in p11-kit 0.21.1 through 0.23.21. Multiple integer overflows have been discovered in the array allocations in the p11-kit library and the p11-kit list command, where overflow checks are missing before calling realloc or calloc.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-29361"
    },
    {
      "cve": "CVE-2020-29362",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in p11-kit 0.21.1 through 0.23.21. A heap-based buffer over-read has been discovered in the RPC protocol used by thep11-kit server/remote commands and the client library. When the remote entity supplies a byte array through a serialized PKCS#11 function call, the receiving entity may allow the reading of up to 4 bytes of memory past the heap allocation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-29362"
    },
    {
      "cve": "CVE-2020-29363",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in p11-kit 0.23.6 through 0.23.21. A heap-based buffer overflow has been discovered in the RPC protocol used by p11-kit server/remote commands and the client library. When the remote entity supplies a serialized byte array in a CK_ATTRIBUTE, the receiving entity may not allocate sufficient length for the buffer to store the deserialized value.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-29363"
    },
    {
      "cve": "CVE-2020-29562",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv function in the GNU C Library (aka glibc or libc6) 2.30 to 2.32, when converting UCS4 text containing an irreversible character, fails an assertion in the code path and aborts the program, potentially resulting in a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-29562"
    },
    {
      "cve": "CVE-2020-29573",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "sysdeps/i386/ldbl2mpn.c in the GNU C Library (aka glibc or libc6) before 2.23 on x86 targets has a stack-based buffer overflow if the input to any of the printf family of functions is an 80-bit long double with a non-canonical bit pattern, as seen when passing a \\x00\\x04\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x04 value to sprintf. NOTE: the issue does not affect glibc by default in 2016 or later (i.e., 2.23 or later) because of commits made in 2015 for inlining of C99 math functions through use of GCC built-ins. In other words, the reference to 2.23 is intentional despite the mention of \"Fixed for glibc 2.33\" in the 26649 reference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-29573"
    },
    {
      "cve": "CVE-2020-35525",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQlite 3.31.1, a potential null pointer derreference was found in the INTERSEC query processing.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-35525"
    },
    {
      "cve": "CVE-2020-35527",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.31.1, there is an out of bounds access problem through ALTER TABLE for views that have a nested FROM clause.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-35527"
    },
    {
      "cve": "CVE-2020-36221",
      "cwe": {
        "id": "CWE-191",
        "name": "Integer Underflow (Wrap or Wraparound)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer underflow was discovered in OpenLDAP before 2.4.57 leading to slapd crashes in the Certificate Exact Assertion processing, resulting in denial of service (schema_init.c serialNumberAndIssuerCheck).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36221"
    },
    {
      "cve": "CVE-2020-36222",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to an assertion failure in slapd in the saslAuthzTo validation, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36222"
    },
    {
      "cve": "CVE-2020-36223",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to a slapd crash in the Values Return Filter control handling, resulting in denial of service (double free and out-of-bounds read).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36223"
    },
    {
      "cve": "CVE-2020-36224",
      "cwe": {
        "id": "CWE-763",
        "name": "Release of Invalid Pointer or Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to an invalid pointer free and slapd crash in the saslAuthzTo processing, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36224"
    },
    {
      "cve": "CVE-2020-36225",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to a double free and slapd crash in the saslAuthzTo processing, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36225"
    },
    {
      "cve": "CVE-2020-36226",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to a memch-\u003ebv_len miscalculation and slapd crash in the saslAuthzTo processing, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36226"
    },
    {
      "cve": "CVE-2020-36227",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to an infinite loop in slapd with the cancel_extop Cancel operation, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36227"
    },
    {
      "cve": "CVE-2020-36228",
      "cwe": {
        "id": "CWE-191",
        "name": "Integer Underflow (Wrap or Wraparound)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer underflow was discovered in OpenLDAP before 2.4.57 leading to a slapd crash in the Certificate List Exact Assertion processing, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36228"
    },
    {
      "cve": "CVE-2020-36229",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in ldap_X509dn2bv in OpenLDAP before 2.4.57 leading to a slapd crash in the X.509 DN parsing in ad_keystring, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36229"
    },
    {
      "cve": "CVE-2020-36230",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading in an assertion failure in slapd in the X.509 DN parsing in decode.c ber_next_element, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36230"
    },
    {
      "cve": "CVE-2021-3177",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Python 3.x through 3.9.1 has a buffer overflow in PyCArg_repr in _ctypes/callproc.c, which may lead to remote code execution in certain Python applications that accept floating-point numbers as untrusted input, as demonstrated by a 1e300 argument to c_double.from_param. This occurs because sprintf is used unsafely.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3177"
    },
    {
      "cve": "CVE-2021-3326",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv function in the GNU C Library (aka glibc or libc6) 2.32 and earlier, when processing invalid input sequences in the ISO-2022-JP-3 encoding, fails an assertion in the code path and aborts the program, potentially resulting in a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3326"
    },
    {
      "cve": "CVE-2021-3426",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in Python 3\u0027s pydoc. A local or adjacent attacker who discovers or is able to convince another local or adjacent user to start a pydoc server could access the server and use it to disclose sensitive information belonging to the other user that they would not normally be able to access. The highest risk of this flaw is to data confidentiality. This flaw affects Python versions before 3.8.9, Python versions before 3.9.3 and Python versions before 3.10.0a7.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3426"
    },
    {
      "cve": "CVE-2021-3516",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in libxml2\u0027s xmllint in versions before 2.9.11. An attacker who is able to submit a crafted file to be processed by xmllint could trigger a use-after-free. The greatest impact of this flaw is to confidentiality, integrity, and availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3516"
    },
    {
      "cve": "CVE-2021-3517",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a flaw in the xml entity encoding functionality of libxml2 in versions before 2.9.11. An attacker who is able to supply a crafted file to be processed by an application linked with the affected functionality of libxml2 could trigger an out-of-bounds read. The most likely impact of this flaw is to application availability, with some potential impact to confidentiality and integrity if an attacker is able to use memory information to further exploit the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3517"
    },
    {
      "cve": "CVE-2021-3518",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in libxml2 in versions before 2.9.11. An attacker who is able to submit a crafted file to be processed by an application linked with libxml2 could trigger a use-after-free. The greatest impact from this flaw is to confidentiality, integrity, and availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3518"
    },
    {
      "cve": "CVE-2021-3520",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in lz4. An attacker who submits a crafted file to an application linked with lz4 may be able to trigger an integer overflow, leading to calling of memmove() on a negative size argument, causing an out-of-bounds write and/or a crash. The greatest impact of this flaw is to availability, with some potential impact to confidentiality and integrity as well.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3520"
    },
    {
      "cve": "CVE-2021-3537",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability found in libxml2 in versions before 2.9.11 shows that it did not propagate errors while parsing XML mixed content, causing a NULL dereference. If an untrusted XML document was parsed in recovery mode and post-validated, the flaw could be used to crash the application. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3537"
    },
    {
      "cve": "CVE-2021-3541",
      "cwe": {
        "id": "CWE-776",
        "name": "Improper Restriction of Recursive Entity References in DTDs (\u0027XML Entity Expansion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in libxml2. Exponential entity expansion attack its possible bypassing all existing protection mechanisms and leading to denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3541"
    },
    {
      "cve": "CVE-2021-3580",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the way nettle\u0027s RSA decryption functions handled specially crafted ciphertext. An attacker could use this flaw to provide a manipulated ciphertext leading to application crash and denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3580"
    },
    {
      "cve": "CVE-2021-3733",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in urllib\u0027s AbstractBasicAuthHandler class. An attacker who controls a malicious HTTP server that an HTTP client (such as web browser) connects to, could trigger a Regular Expression Denial of Service (ReDOS) during an authentication request with a specially crafted payload that is sent by the server to the client. The greatest threat that this flaw poses is to application availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3733"
    },
    {
      "cve": "CVE-2021-3737",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in python. An improperly handled HTTP response in the HTTP client code of python may allow a remote attacker, who controls the HTTP server, to make the client script enter an infinite loop, consuming CPU time. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3737"
    },
    {
      "cve": "CVE-2021-3826",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Heap/stack buffer overflow in the dlang_lname function in d-demangle.c in libiberty allows attackers to potentially cause a denial of service (segmentation fault and crash) via a crafted mangled symbol.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3826"
    },
    {
      "cve": "CVE-2021-3997",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in systemd. An uncontrolled recursion in systemd-tmpfiles may lead to a denial of service at boot time when too many nested directories are created in /tmp.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3997"
    },
    {
      "cve": "CVE-2021-3998",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. The realpath() function can mistakenly return an unexpected value, potentially leading to information leakage and disclosure of sensitive data.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3998"
    },
    {
      "cve": "CVE-2021-3999",
      "cwe": {
        "id": "CWE-193",
        "name": "Off-by-one Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. An off-by-one buffer overflow and underflow in getcwd() may lead to memory corruption when the size of the buffer is exactly 1. A local attacker who can control the input buffer and size passed to getcwd() in a setuid program could use this flaw to potentially execute arbitrary code and escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3999"
    },
    {
      "cve": "CVE-2021-4122",
      "cwe": {
        "id": "CWE-345",
        "name": "Insufficient Verification of Data Authenticity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "It was found that a specially crafted LUKS header could trick cryptsetup into disabling encryption during the recovery of the device. An attacker with physical access to the medium, such as a flash disk, could use this flaw to force a user into permanently disabling the encryption layer of that medium.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:P/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-4122"
    },
    {
      "cve": "CVE-2021-4189",
      "cwe": {
        "id": "CWE-252",
        "name": "Unchecked Return Value"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in Python, specifically in the FTP (File Transfer Protocol) client library in PASV (passive) mode. The issue is how the FTP client trusts the host from the PASV response by default. This flaw allows an attacker to set up a malicious FTP server that can trick FTP clients into connecting back to a given IP address and port. This vulnerability could lead to FTP client scanning ports, which otherwise would not have been possible.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-4189"
    },
    {
      "cve": "CVE-2021-4209",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference flaw was found in GnuTLS. As Nettle\u0027s hash update functions internally call memcpy, providing zero-length input may cause undefined behavior. This flaw leads to a denial of service after authentication in rare circumstances.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-4209"
    },
    {
      "cve": "CVE-2021-20193",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the src/list.c of tar 1.33 and earlier. This flaw allows an attacker who can submit a crafted input file to tar to cause uncontrolled consumption of memory. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-20193"
    },
    {
      "cve": "CVE-2021-20227",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in SQLite\u0027s SELECT query functionality (src/select.c). This flaw allows an attacker who is capable of running SQL queries locally on the SQLite database to cause a denial of service or possible code execution by triggering a use-after-free. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-20227"
    },
    {
      "cve": "CVE-2021-20231",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in gnutls. A use after free issue in client sending key_share extension may lead to memory corruption and other consequences.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-20231"
    },
    {
      "cve": "CVE-2021-20232",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in gnutls. A use after free issue in client_send_params in lib/ext/pre_shared_key.c may lead to memory corruption and other potential consequences.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-20232"
    },
    {
      "cve": "CVE-2021-20305",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in Nettle in versions before 3.7.2, where several Nettle signature verification functions (GOST DSA, EDDSA \u0026 ECDSA) result in the Elliptic Curve Cryptography point (ECC) multiply function being called with out-of-range scalers, possibly resulting in incorrect results. This flaw allows an attacker to force an invalid signature, causing an assertion failure or possible validation. The highest threat to this vulnerability is to confidentiality, integrity, as well as system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-20305"
    },
    {
      "cve": "CVE-2021-22876",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.1.1 to and including 7.75.0 is vulnerable to an \"Exposure of Private Personal Information to an Unauthorized Actor\" by leaking credentials in the HTTP Referer: header. libcurl does not strip off user credentials from the URL when automatically populating the Referer: HTTP request header field in outgoing HTTP requests, and therefore risks leaking sensitive data to the server that is the target of the second HTTP request.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22876"
    },
    {
      "cve": "CVE-2021-22890",
      "cwe": {
        "id": "CWE-290",
        "name": "Authentication Bypass by Spoofing"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.63.0 to and including 7.75.0 includes vulnerability that allows a malicious HTTPS proxy to MITM a connection due to bad handling of TLS 1.3 session tickets. When using a HTTPS proxy and TLS 1.3, libcurl can confuse session tickets arriving from the HTTPS proxy but work as if they arrived from the remote server and then wrongly \"short-cut\" the host handshake. When confusing the tickets, a HTTPS proxy can trick libcurl to use the wrong session ticket resume for the host and thereby circumvent the server TLS certificate check and make a MITM attack to be possible to perform unnoticed. Note that such a malicious HTTPS proxy needs to provide a certificate that curl will accept for the MITMed server for an attack to work - unless curl has been told to ignore the server certificate check.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22890"
    },
    {
      "cve": "CVE-2021-22897",
      "cwe": {
        "id": "CWE-668",
        "name": "Exposure of Resource to Wrong Sphere"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.61.0 through 7.76.1 suffers from exposure of data element to wrong session due to a mistake in the code for CURLOPT_SSL_CIPHER_LIST when libcurl is built to use the Schannel TLS library. The selected cipher set was stored in a single \"static\" variable in the library, which has the surprising side-effect that if an application sets up multiple concurrent transfers, the last one that sets the ciphers will accidentally control the set used by all transfers. In a worst-case scenario, this weakens transport security significantly.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22897"
    },
    {
      "cve": "CVE-2021-22898",
      "cwe": {
        "id": "CWE-909",
        "name": "Missing Initialization of Resource"
      },
      "notes": [
        {
          "category": "summary",
          "text": "**NOTE: CVE-2021-22898 is an incomplete fix (see https://hackerone.com/reports/1223882)! Check if affected products also have fixed CVE-22925 instead! Do not use CVE-2021-22898 in public advisories!**\r\n\r\ncurl 7.7 through 7.76.1 suffers from an information disclosure when the `-t` command line option, known as `CURLOPT_TELNETOPTIONS` in libcurl, is used to send variable=content pairs to TELNET servers. Due to a flaw in the option parser for sending NEW_ENV variables, libcurl could be made to pass on uninitialized data from a stack based buffer to the server, resulting in potentially revealing sensitive internal information to the server using a clear-text network protocol.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.1,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22898"
    },
    {
      "cve": "CVE-2021-22901",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.75.0 through 7.76.1 suffers from a use-after-free vulnerability resulting in already freed memory being used when a TLS 1.3 session ticket arrives over a connection. A malicious server can use this in rare unfortunate circumstances to potentially reach remote code execution in the client. When libcurl at run-time sets up support for TLS 1.3 session tickets on a connection using OpenSSL, it stores pointers to the transfer in-memory object for later retrieval when a session ticket arrives. If the connection is used by multiple transfers (like with a reused HTTP/1.1 connection or multiplexed HTTP/2 connection) that first transfer object might be freed before the new session is established on that connection and then the function will access a memory buffer that might be freed. When using that memory, libcurl might even call a function pointer in the object, making it possible for a remote code execution if the server could somehow manage to get crafted memory content into the correct place in memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22901"
    },
    {
      "cve": "CVE-2021-22922",
      "cwe": {
        "id": "CWE-354",
        "name": "Improper Validation of Integrity Check Value"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl is instructed to download content using the metalink feature, thecontents is verified against a hash provided in the metalink XML file.The metalink XML file points out to the client how to get the same contentfrom a set of different URLs, potentially hosted by different servers and theclient can then download the file from one or several of them. In a serial orparallel manner.If one of the servers hosting the contents has been breached and the contentsof the specific file on that server is replaced with a modified payload, curlshould detect this when the hash of the file mismatches after a completeddownload. It should remove the contents and instead try getting the contentsfrom another URL. This is not done, and instead such a hash mismatch is onlymentioned in text and the potentially malicious content is kept in the file ondisk.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22922"
    },
    {
      "cve": "CVE-2021-22923",
      "cwe": {
        "id": "CWE-522",
        "name": "Insufficiently Protected Credentials"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl is instructed to get content using the metalink feature, and a user name and password are used to download the metalink XML file, those same credentials are then subsequently passed on to each of the servers from which curl will download or try to download the contents from. Often contrary to the user\u0027s expectations and intentions and without telling the user it happened.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22923"
    },
    {
      "cve": "CVE-2021-22924",
      "cwe": {
        "id": "CWE-706",
        "name": "Use of Incorrectly-Resolved Name or Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl keeps previously used connections in a connection pool for subsequent transfers to reuse, if one of them matches the setup. Due to errors in the logic, the config matching function did not take \u0027issuercert\u0027 into account and it compared the involved paths *case insensitively*, which could lead to libcurl reusing wrong connections. File paths are, or can be, case sensitive on many systems but not all, and can even vary depending on used file systems. The comparison also didn\u0027t include the \u0027issuer cert\u0027 which a transfer can set to qualify how to verify the server certificate.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22924"
    },
    {
      "cve": "CVE-2021-22925",
      "cwe": {
        "id": "CWE-908",
        "name": "Use of Uninitialized Resource"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl supports the `-t` command line option, known as `CURLOPT_TELNETOPTIONS` in libcurl. This rarely used option is used to send variable=content pairs to TELNET servers. Due to flaw in the option parser for sending `NEW_ENV` variables, libcurl could be made to pass on uninitialized data from a stack based buffer to the server. Therefore potentially revealing sensitive internal information to the server using a clear-text network protocol. This could happen because curl did not call and use sscanf() correctly when parsing the string provided by the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22925"
    },
    {
      "cve": "CVE-2021-22926",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl-using applications can ask for a specific client certificate to be used in a transfer. This is done with the `CURLOPT_SSLCERT` option (`--cert` with the command line tool).When libcurl is built to use the macOS native TLS library Secure Transport, an application can ask for the client certificate by name or with a file name - using the same option. If the name exists as a file, it will be used instead of by name.If the appliction runs with a current working directory that is writable by other users (like `/tmp`), a malicious user can create a file name with the same name as the app wants to use by name, and thereby trick the application to use the file based cert instead of the one referred to by name making libcurl send the wrong client certificate in the TLS connection handshake.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22926"
    },
    {
      "cve": "CVE-2021-22945",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When sending data to an MQTT server, libcurl \u003c= 7.73.0 and 7.78.0 could in some circumstances erroneously keep a pointer to an already freed memory area and both use that again in a subsequent call to send data and also free it *again*.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22945"
    },
    {
      "cve": "CVE-2021-22946",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A user can tell curl \u003e= 7.20.0 and \u003c= 7.78.0 to require a successful upgrade to TLS when speaking to an IMAP, POP3 or FTP server (`--ssl-reqd` on the command line or`CURLOPT_USE_SSL` set to `CURLUSESSL_CONTROL` or `CURLUSESSL_ALL` withlibcurl). This requirement could be bypassed if the server would return a properly crafted but perfectly legitimate response.This flaw would then make curl silently continue its operations **withoutTLS** contrary to the instructions and expectations, exposing possibly sensitive data in clear text over the network.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22946"
    },
    {
      "cve": "CVE-2021-22947",
      "cwe": {
        "id": "CWE-345",
        "name": "Insufficient Verification of Data Authenticity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl \u003e= 7.20.0 and \u003c= 7.78.0 connects to an IMAP or POP3 server to retrieve data using STARTTLS to upgrade to TLS security, the server can respond and send back multiple responses at once that curl caches. curl would then upgrade to TLS but not flush the in-queue of cached responses but instead continue using and trustingthe responses it got *before* the TLS handshake as if they were authenticated.Using this flaw, it allows a Man-In-The-Middle attacker to first inject the fake responses, then pass-through the TLS traffic from the legitimate server and trick curl into sending data back to the user thinking the attacker\u0027s injected data comes from the TLS-protected server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22947"
    },
    {
      "cve": "CVE-2021-23336",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The package python/cpython from 0 and before 3.6.13, from 3.7.0 and before 3.7.10, from 3.8.0 and before 3.8.8, from 3.9.0 and before 3.9.2 are vulnerable to Web Cache Poisoning via urllib.parse.parse_qsl and urllib.parse.parse_qs by using a vector called parameter cloaking. When the attacker can separate query parameters using a semicolon (;), they can cause a difference in the interpretation of the request between the proxy (running with default configuration) and the server. This can result in malicious requests being cached as completely safe ones, as the proxy would usually not see the semicolon as a separator, and therefore would not include it in a cache key of an unkeyed parameter.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:N/I:L/A:H/E:P/RL:U/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-23336"
    },
    {
      "cve": "CVE-2021-27212",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In OpenLDAP through 2.4.57 and 2.5.x through 2.5.1alpha, an assertion failure in slapd can occur in the issuerAndThisUpdateCheck function via a crafted packet, resulting in a denial of service (daemon exit) via a short timestamp. This is related to schema_init.c and checkTime.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-27212"
    },
    {
      "cve": "CVE-2021-27218",
      "cwe": {
        "id": "CWE-681",
        "name": "Incorrect Conversion between Numeric Types"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in GNOME GLib before 2.66.7 and 2.67.x before 2.67.4. If g_byte_array_new_take() was called with a buffer of 4GB or more on a 64-bit platform, the length would be truncated modulo 2**32, causing unintended length truncation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-27218"
    },
    {
      "cve": "CVE-2021-27219",
      "cwe": {
        "id": "CWE-681",
        "name": "Incorrect Conversion between Numeric Types"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in GNOME GLib before 2.66.6 and 2.67.x before 2.67.3. The function g_bytes_new has an integer overflow on 64-bit platforms due to an implicit cast from 64 bits to 32 bits. The overflow could potentially lead to memory corruption.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-27219"
    },
    {
      "cve": "CVE-2021-27645",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The nameserver caching daemon (nscd) in the GNU C Library (aka glibc or libc6) 2.29 through 2.33, when processing a request for netgroup lookup, may crash due to a double-free, potentially resulting in degraded service or Denial of Service on the local system. This is related to netgroupcache.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 2.5,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-27645"
    },
    {
      "cve": "CVE-2021-28041",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ssh-agent in OpenSSH before 8.5 has a double free that may be relevant in a few less-common scenarios, such as unconstrained agent-socket access on a legacy operating system, or the forwarding of an agent to an attacker-controlled host.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-28041"
    },
    {
      "cve": "CVE-2021-28153",
      "cwe": {
        "id": "CWE-59",
        "name": "Improper Link Resolution Before File Access (\u0027Link Following\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in GNOME GLib before 2.66.8. When g_file_replace() is used with G_FILE_CREATE_REPLACE_DESTINATION to replace a path that is a dangling symlink, it incorrectly also creates the target of the symlink as an empty file, which could conceivably have security relevance if the symlink is attacker-controlled. (If the path is a symlink to a file that already exists, then the contents of that file correctly remain unchanged.)",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-28153"
    },
    {
      "cve": "CVE-2021-28363",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The urllib3 library 1.26.x before 1.26.4 for Python omits SSL certificate validation in some cases involving HTTPS to HTTPS proxies. The initial connection to the HTTPS proxy (if an SSLContext isn\u0027t given via proxy_config) doesn\u0027t verify the hostname of the certificate. This means certificates for different servers that still validate properly with the default urllib3 SSLContext will be silently accepted.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-28363"
    },
    {
      "cve": "CVE-2021-28861",
      "cwe": {
        "id": "CWE-601",
        "name": "URL Redirection to Untrusted Site (\u0027Open Redirect\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Python 3.x through 3.10 has an open redirection vulnerability in lib/http/server.py due to no protection against multiple (/) at the beginning of URI path which may leads to information disclosure. NOTE: this is disputed by a third party because the http.server.html documentation page states \"Warning: http.server is not recommended for production. It only implements basic security checks.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-28861"
    },
    {
      "cve": "CVE-2021-31239",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue found in SQLite SQLite3 v.3.35.4 that could allow a remote attacker to cause a denial of service via the appendvfs.c function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-31239"
    },
    {
      "cve": "CVE-2021-32292",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in json-c from 20200420 (post 0.14 unreleased code) through 0.15-20200726. A stack-buffer-overflow exists in the auxiliary sample program json_parse which is located in the function parseit.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-32292"
    },
    {
      "cve": "CVE-2021-33294",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In elfutils 0.183, an infinite loop was found in the function handle_symtab in readelf.c .Which allows attackers to cause a denial of service (infinite loop) via crafted file.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-33294"
    },
    {
      "cve": "CVE-2021-33560",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Libgcrypt before 1.8.8 and 1.9.x before 1.9.3 mishandles ElGamal encryption because it lacks exponent blinding to address a side-channel attack against mpi_powm, and the window size is not chosen appropriately. This, for example, affects use of ElGamal in OpenPGP.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-33560"
    },
    {
      "cve": "CVE-2021-33574",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The mq_notify function in the GNU C Library (aka glibc) versions 2.32 and 2.33 has a use-after-free. It may use the notification thread attributes object (passed through its struct sigevent parameter) after it has been freed by the caller, leading to a denial of service (application crash) or possibly unspecified other impact.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-33574"
    },
    {
      "cve": "CVE-2021-33910",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The use of alloca function with an uncontrolled size in function unit_name_path_escape allows a local attacker, able to mount a filesystem on a very long path, to crash systemd and the whole system by allocating a very large space in the stack.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-33910"
    },
    {
      "cve": "CVE-2021-35942",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The wordexp function in the GNU C Library (aka glibc) through 2.33 may crash or read arbitrary memory in parse_param (in posix/wordexp.c) when called with an untrusted, crafted pattern, potentially resulting in a denial of service or disclosure of information. This occurs because atoi was used but strtoul should have been used to ensure correct calculations.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-35942"
    },
    {
      "cve": "CVE-2021-36084",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The CIL compiler in SELinux 3.2 has a use-after-free in __cil_verify_classperms (called from __cil_verify_classpermission and __cil_pre_verify_helper).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-36084"
    },
    {
      "cve": "CVE-2021-36085",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The CIL compiler in SELinux 3.2 has a use-after-free in __cil_verify_classperms (called from __verify_map_perm_classperms and hashtab_map).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-36085"
    },
    {
      "cve": "CVE-2021-36086",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The CIL compiler in SELinux 3.2 has a use-after-free in cil_reset_classpermission (called from cil_reset_classperms_set and cil_reset_classperms_list).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-36086"
    },
    {
      "cve": "CVE-2021-36087",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The CIL compiler in SELinux 3.2 has a heap-based buffer over-read in ebitmap_match_any (called indirectly from cil_check_neverallow). This occurs because there is sometimes a lack of checks for invalid statements in an optional block.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-36087"
    },
    {
      "cve": "CVE-2021-36222",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ec_verify in kdc/kdc_preauth_ec.c in the Key Distribution Center (KDC) in MIT Kerberos 5 (aka krb5) before 1.18.4 and 1.19.x before 1.19.2 allows remote attackers to cause a NULL pointer dereference and daemon crash. This occurs because a return value is not properly managed in a certain situation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-36222"
    },
    {
      "cve": "CVE-2021-36690",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A segmentation fault can occur in the sqlite3.exe command-line component of SQLite 3.36.0 via the idxGetTableInfo function when there is a crafted SQL query. NOTE: the vendor disputes the relevance of this report because a sqlite3.exe user already has full privileges (e.g., is intentionally allowed to execute commands). This report does NOT imply any problem in the SQLite library.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-36690"
    },
    {
      "cve": "CVE-2021-37600",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow in util-linux through 2.37.1 can potentially cause a buffer overflow if an attacker were able to use system resources in a way that leads to a large number in the /proc/sysvipc/sem file. NOTE: this is unexploitable in GNU C Library environments, and possibly in all realistic environments",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-37600"
    },
    {
      "cve": "CVE-2021-37750",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Key Distribution Center (KDC) in MIT Kerberos 5 (aka krb5) before 1.18.5 and 1.19.x before 1.19.3 has a NULL pointer dereference in kdc/do_tgs_req.c via a FAST inner body that lacks a server field.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-37750"
    },
    {
      "cve": "CVE-2021-38604",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In librt in the GNU C Library (aka glibc) through 2.34, sysdeps/unix/sysv/linux/mq_notify.c mishandles certain NOTIFY_REMOVED data, leading to a NULL pointer dereference. NOTE: this vulnerability was introduced as a side effect of the CVE-2021-33574 fix.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-38604"
    },
    {
      "cve": "CVE-2021-41617",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "sshd in OpenSSH 6.2 through 8.x before 8.8, when certain non-default configurations are used, allows privilege escalation because supplemental groups are not initialized as expected. Helper programs for AuthorizedKeysCommand and AuthorizedPrincipalsCommand may run with privileges associated with group memberships of the sshd process, if the configuration specifies running the command as a different user.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-41617"
    },
    {
      "cve": "CVE-2021-43396",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** In iconvdata/iso-2022-jp-3.c in the GNU C Library (aka glibc) 2.34, remote attackers can force iconv() to emit a spurious \u0027\\0\u0027 character via crafted ISO-2022-JP-3 data that is accompanied by an internal state reset. This may affect data integrity in certain iconv() use cases. NOTE: the vendor states \"the bug cannot be invoked through user input and requires iconv to be invoked with a NULL inbuf, which ought to require a separate application bug to do so unintentionally. Hence there\u0027s no security impact to the bug.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-43396"
    },
    {
      "cve": "CVE-2021-43618",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU Multiple Precision Arithmetic Library (GMP) through 6.2.1 has an mpz/inp_raw.c integer overflow and resultant buffer overflow via crafted input, leading to a segmentation fault on 32-bit platforms.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-43618"
    },
    {
      "cve": "CVE-2021-45960",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Expat (aka libexpat) before 2.4.3, a left shift by 29 (or more) places in the storeAtts function in xmlparse.c can lead to realloc misbehavior (e.g., allocating too few bytes, or only freeing memory).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-45960"
    },
    {
      "cve": "CVE-2021-46143",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In doProlog in xmlparse.c in Expat (aka libexpat) before 2.4.3, an integer overflow exists for m_groupSize.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-46143"
    },
    {
      "cve": "CVE-2021-46195",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GCC v12.0 was discovered to contain an uncontrolled recursion via the component libiberty/rust-demangle.c. This vulnerability allows attackers to cause a Denial of Service (DoS) by consuming excessive CPU and memory resources.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-46195"
    },
    {
      "cve": "CVE-2021-46828",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libtirpc before 1.3.3rc1, remote attackers could exhaust the file descriptors of a process that uses libtirpc because idle TCP connections are mishandled. This can, in turn, lead to an svc_run infinite loop without accepting new connections.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-46828"
    },
    {
      "cve": "CVE-2021-46848",
      "cwe": {
        "id": "CWE-193",
        "name": "Off-by-one Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU Libtasn1 before 4.19.0 has an ETYPE_OK off-by-one array size check that affects asn1_encode_simple_der.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-46848"
    },
    {
      "cve": "CVE-2022-0391",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in Python, specifically within the urllib.parse module. This module helps break Uniform Resource Locator (URL) strings into components. The issue involves how the urlparse method does not sanitize input and allows characters like \u0027\\r\u0027 and \u0027\\n\u0027 in the URL path. This flaw allows an attacker to input a crafted URL, leading to injection attacks. This flaw affects Python versions prior to 3.10.0b1, 3.9.5, 3.8.11, 3.7.11 and 3.6.14.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-0391"
    },
    {
      "cve": "CVE-2022-0563",
      "cwe": {
        "id": "CWE-209",
        "name": "Generation of Error Message Containing Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the util-linux chfn and chsh utilities when compiled with Readline support. The Readline library uses an \"INPUTRC\" environment variable to get a path to the library config file. When the library cannot parse the specified file, it prints an error message containing data from the file. This flaw allows an unprivileged user to read root-owned files, potentially leading to privilege escalation. This flaw affects util-linux versions prior to 2.37.4.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-0563"
    },
    {
      "cve": "CVE-2022-0778",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The BN_mod_sqrt() function in openSSL, which computes a modular square root, contains a bug that can cause it to loop forever for non-prime moduli. Internally this function is used when parsing certificates that contain elliptic curve public keys in compressed form or explicit elliptic curve parameters with a base point encoded in compressed form. It is possible to trigger the infinite loop by crafting a certificate that has invalid explicit curve parameters. Since certificate parsing happens prior to verification of the certificate signature, any process that parses an externally supplied certificate may thus be subject to a denial of service attack. The infinite loop can also be reached when parsing crafted private keys as they can contain explicit elliptic curve parameters. (https://www.openssl.org/news/secadv/20220315.txt)",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-0778"
    },
    {
      "cve": "CVE-2022-1271",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An arbitrary file write vulnerability was found in GNU gzip\u0027s zgrep utility. When zgrep is applied on the attacker\u0027s chosen file name (for example, a crafted file name), this can overwrite an attacker\u0027s content to an arbitrary attacker-selected file. This flaw occurs due to insufficient validation when processing filenames with two or more newlines where selected content and the target file names are embedded in crafted multi-line file names. This flaw allows a remote, low privileged attacker to force zgrep to write arbitrary files on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-1271"
    },
    {
      "cve": "CVE-2022-1292",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The c_rehash script does not properly sanitise shell metacharacters to prevent command injection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-1292"
    },
    {
      "cve": "CVE-2022-1304",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds read/write vulnerability was found in e2fsprogs 1.46.5. This issue leads to a segmentation fault and possibly arbitrary code execution via a specially crafted filesystem.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-1304"
    },
    {
      "cve": "CVE-2022-1343",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Under certain circumstances, the command line OCSP verify function reports successful verification when the verification in fact failed. In this case the incorrect successful response will also be accompanied by error messages showing the failure and contradicting the apparently successful result.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-1343"
    },
    {
      "cve": "CVE-2022-1434",
      "cwe": {
        "id": "CWE-327",
        "name": "Use of a Broken or Risky Cryptographic Algorithm"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When using the RC4-MD5 ciphersuite, which is disabled by default, an attacker is able to modify data in transit due to an incorrect use of the AAD data as the MAC key in OpenSSL 3.0. An attacker is not able to decrypt any communication.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-1434"
    },
    {
      "cve": "CVE-2022-1473",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The used OpenSSL version improperly reuses memory when decoding certificates or keys. This can lead to a process termination and Denial of Service for long lived processes.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-1473"
    },
    {
      "cve": "CVE-2022-2068",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In addition to the c_rehash shell command injection identified in CVE-2022-1292, further circumstances where the c_rehash script does not properly sanitise shell metacharacters to prevent command injection were found by code review. When the CVE-2022-1292 was fixed it was not discovered that there are other places in the script where the file names of certificates being hashed were possibly passed to a command executed through the shell. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-2068"
    },
    {
      "cve": "CVE-2022-2097",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "AES OCB mode for 32-bit x86 platforms using the AES-NI assembly optimised implementation will not encrypt the entirety of the data under some circumstances. This could reveal sixteen bytes of data that was preexisting in the memory that wasn\u0027t written. In the special case of \"in place\" encryption, sixteen bytes of the plaintext would be revealed. Since OpenSSL does not support OCB based cipher suites for TLS and DTLS, they are both unaffected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-2097"
    },
    {
      "cve": "CVE-2022-2274",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The OpenSSL 3.0.4 release introduced a serious bug in the RSA implementation for X86_64 CPUs supporting the AVX512IFMA instructions. This issue makes the RSA implementation with 2048 bit private keys incorrect on such machines and memory corruption will happen during the computation. As a consequence of the memory corruption an attacker may be able to trigger a remote code execution on the machine performing the computation. SSL/TLS servers or other servers using 2048 bit RSA private keys running on machines supporting AVX512IFMA instructions of the X86_64 architecture are affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-2274"
    },
    {
      "cve": "CVE-2022-2509",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability found in gnutls. This security flaw happens because of a double free error occurs during verification of pkcs7 signatures in gnutls_pkcs7_verify function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-2509"
    },
    {
      "cve": "CVE-2022-3715",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the bash package, where a heap-buffer overflow can occur in valid parameter_transform. This issue may lead to memory problems.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-3715"
    },
    {
      "cve": "CVE-2022-3821",
      "cwe": {
        "id": "CWE-193",
        "name": "Off-by-one Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An off-by-one Error issue was discovered in Systemd in format_timespan() function of time-util.c. An attacker could supply specific values for time and accuracy that leads to buffer overrun in format_timespan(), leading to a Denial of Service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-3821"
    },
    {
      "cve": "CVE-2022-4304",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful decryption an attacker would have to be able to send a very large number of trial messages for decryption. The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An attacker that had observed a genuine connection between a client and a server could use this flaw to send trial messages to the server and record the time taken to process them. After a sufficiently large number of messages the attacker could recover the pre-master secret used for the original connection and thus be able to decrypt the application data sent over that connection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-4304"
    },
    {
      "cve": "CVE-2022-4450",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the \"name\" (e.g. \"CERTIFICATE\"), any header data and the payload data. If the function succeeds then the \"name_out\", \"header\" and \"data\" arguments are populated with pointers to buffers containing the relevant decoded data. The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate the header argument with a pointer to a buffer that has already been freed. If the caller also frees this buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and therefore these functions are also directly affected. These functions are also called indirectly by a number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file() which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL asn1parse command line application is also impacted by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-4450"
    },
    {
      "cve": "CVE-2022-22576",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-22576"
    },
    {
      "cve": "CVE-2022-22822",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "addBinding in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-22822"
    },
    {
      "cve": "CVE-2022-22823",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "build_model in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-22823"
    },
    {
      "cve": "CVE-2022-22824",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "defineAttribute in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-22824"
    },
    {
      "cve": "CVE-2022-22825",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "lookup in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-22825"
    },
    {
      "cve": "CVE-2022-22826",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nextScaffoldPart in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-22826"
    },
    {
      "cve": "CVE-2022-22827",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "storeAtts in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-22827"
    },
    {
      "cve": "CVE-2022-23218",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The deprecated compatibility function svcunix_create in the sunrpc module of the GNU C Library (aka glibc) through 2.34 copies its path argument on the stack without validating its length, which may result in a buffer overflow, potentially resulting in a denial of service or (if an application is not built with a stack protector enabled) arbitrary code execution.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-23218"
    },
    {
      "cve": "CVE-2022-23219",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The deprecated compatibility function clnt_create in the sunrpc module of the GNU C Library (aka glibc) through 2.34 copies its hostname argument on the stack without validating its length, which may result in a buffer overflow, potentially resulting in a denial of service or (if an application is not built with a stack protector enabled) arbitrary code execution.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-23219"
    },
    {
      "cve": "CVE-2022-23308",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "valid.c in libxml2 before 2.9.13 has a use-after-free of ID and IDREF attributes.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-23308"
    },
    {
      "cve": "CVE-2022-23852",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Expat (aka libexpat) before 2.4.4 has a signed integer overflow in XML_GetBuffer, for configurations with a nonzero XML_CONTEXT_BYTES.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-23852"
    },
    {
      "cve": "CVE-2022-23990",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Expat (aka libexpat) before 2.4.4 has an integer overflow in the doProlog function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-23990"
    },
    {
      "cve": "CVE-2022-24407",
      "cwe": {
        "id": "CWE-89",
        "name": "Improper Neutralization of Special Elements used in an SQL Command (\u0027SQL Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Cyrus SASL 2.1.17 through 2.1.27 before 2.1.28, plugins/sql.c does not escape the password for a SQL INSERT or UPDATE statement.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-24407"
    },
    {
      "cve": "CVE-2022-25235",
      "cwe": {
        "id": "CWE-116",
        "name": "Improper Encoding or Escaping of Output"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmltok_impl.c in Expat (aka libexpat) before 2.4.5 lacks certain validation of encoding, such as checks for whether a UTF-8 character is valid in a certain context.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-25235"
    },
    {
      "cve": "CVE-2022-25236",
      "cwe": {
        "id": "CWE-668",
        "name": "Exposure of Resource to Wrong Sphere"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmlparse.c in Expat (aka libexpat) before 2.4.5 allows attackers to insert namespace-separator characters into namespace URIs.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-25236"
    },
    {
      "cve": "CVE-2022-25313",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Expat (aka libexpat) before 2.4.5, an attacker can trigger stack exhaustion in build_model via a large nesting depth in the DTD element.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-25313"
    },
    {
      "cve": "CVE-2022-25314",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Expat (aka libexpat) before 2.4.5, there is an integer overflow in copyString.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-25314"
    },
    {
      "cve": "CVE-2022-25315",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Expat (aka libexpat) before 2.4.5, there is an integer overflow in storeRawNames.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-25315"
    },
    {
      "cve": "CVE-2022-26488",
      "cwe": {
        "id": "CWE-426",
        "name": "Untrusted Search Path"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python before 3.10.3 on Windows, local users can gain privileges because the search path is inadequately secured. The installer may allow a local attacker to add user-writable directories to the system search path. To exploit, an administrator must have installed Python for all users and enabled PATH entries. A non-administrative user can trigger a repair that incorrectly adds user-writable paths into PATH, enabling search-path hijacking of other users and system services. This affects Python (CPython) through 3.7.12, 3.8.x through 3.8.12, 3.9.x through 3.9.10, and 3.10.x through 3.10.2.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-26488"
    },
    {
      "cve": "CVE-2022-27774",
      "cwe": {
        "id": "CWE-522",
        "name": "Insufficiently Protected Credentials"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27774"
    },
    {
      "cve": "CVE-2022-27775",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an IPv6 address that was in the connection pool but with a different zone id it could reuse a connection instead.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27775"
    },
    {
      "cve": "CVE-2022-27776",
      "cwe": {
        "id": "CWE-522",
        "name": "Insufficiently Protected Credentials"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27776"
    },
    {
      "cve": "CVE-2022-27778",
      "cwe": {
        "id": "CWE-706",
        "name": "Use of Incorrectly-Resolved Name or Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use of incorrectly resolved name vulnerability fixed in 7.83.1 might remove the wrong file when `--no-clobber` is used together with `--remove-on-error`.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27778"
    },
    {
      "cve": "CVE-2022-27779",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl wrongly allows cookies to be set for Top Level Domains (TLDs) if thehost name is provided with a trailing dot.curl can be told to receive and send cookies. curl\u0027s \"cookie engine\" can bebuilt with or without [Public Suffix List](https://publicsuffix.org/)awareness. If PSL support not provided, a more rudimentary check exists to atleast prevent cookies from being set on TLDs. This check was broken if thehost name in the URL uses a trailing dot.This can allow arbitrary sites to set cookies that then would get sent to adifferent and unrelated site or domain.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27779"
    },
    {
      "cve": "CVE-2022-27780",
      "cwe": {
        "id": "CWE-918",
        "name": "Server-Side Request Forgery (SSRF)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The curl URL parser wrongly accepts percent-encoded URL separators like \u0027/\u0027when decoding the host name part of a URL, making it a *different* URL usingthe wrong host name when it is later retrieved.For example, a URL like `http://example.com%2F127.0.0.1/`, would be allowed bythe parser and get transposed into `http://example.com/127.0.0.1/`. This flawcan be used to circumvent filters, checks and more.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27780"
    },
    {
      "cve": "CVE-2022-27781",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl provides the `CURLOPT_CERTINFO` option to allow applications torequest details to be returned about a server\u0027s certificate chain.Due to an erroneous function, a malicious server could make libcurl built withNSS get stuck in a never-ending busy-loop when trying to retrieve thatinformation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27781"
    },
    {
      "cve": "CVE-2022-27782",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were left out from the configuration match checks, making themmatch too easily.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27782"
    },
    {
      "cve": "CVE-2022-27943",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libiberty/rust-demangle.c in GNU GCC 11.2 allows stack consumption in demangle_const, as demonstrated by nm-new.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27943"
    },
    {
      "cve": "CVE-2022-28321",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Linux-PAM package before 1.5.2-6.1 for openSUSE Tumbleweed allows authentication bypass for SSH logins. The pam_access.so module doesn\u0027t correctly restrict login if a user tries to connect from an IP address that is not resolvable via DNS. In such conditions, a user with denied access to a machine can still get access. NOTE: the relevance of this issue is largely limited to openSUSE Tumbleweed and openSUSE Factory; it does not affect Linux-PAM upstream.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-28321"
    },
    {
      "cve": "CVE-2022-29155",
      "cwe": {
        "id": "CWE-89",
        "name": "Improper Neutralization of Special Elements used in an SQL Command (\u0027SQL Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In OpenLDAP 2.x before 2.5.12 and 2.6.x before 2.6.2, a SQL injection vulnerability exists in the experimental back-sql backend to slapd, via a SQL statement within an LDAP query. This can occur during an LDAP search operation when the search filter is processed, due to a lack of proper escaping.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-29155"
    },
    {
      "cve": "CVE-2022-29824",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libxml2 before 2.9.14, several buffer handling functions in buf.c (xmlBuf*) and tree.c (xmlBuffer*) don\u0027t check for integer overflows. This can result in out-of-bounds memory writes. Exploitation requires a victim to open a crafted, multi-gigabyte XML file. Other software using libxml2\u0027s buffer functions, for example libxslt through 1.1.35, is affected as well.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-29824"
    },
    {
      "cve": "CVE-2022-30115",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Using its HSTS support, curl can be instructed to use HTTPS directly insteadof using an insecure clear-text HTTP step even when HTTP is provided in theURL. This mechanism could be bypassed if the host name in the given URL used atrailing dot while not using one when it built the HSTS cache. Or the otherway around - by having the trailing dot in the HSTS cache and *not* using thetrailing dot in the URL.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-30115"
    },
    {
      "cve": "CVE-2022-32205",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A malicious server can serve excessive amounts of \"Set-Cookie:\" headers in a HTTP response to curl and curl \u003c 7.84.0 stores all of them. A sufficiently large amount of (big) cookies make subsequent HTTP requests to this, or other servers to which the cookies match, create requests that become larger than the threshold that curl uses internally to avoid sending crazy large requests (1048576 bytes) and instead returns an error.This denial state might remain for as long as the same cookies are kept, match and haven\u0027t expired. Due to cookie matching rules, a server on \"foo.example.com\" can set cookies that also would match for \"bar.example.com\", making it it possible for a \"sister server\" to effectively cause a denial of service for a sibling site on the same second level domain using this method.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-32205"
    },
    {
      "cve": "CVE-2022-32206",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl \u003c 7.84.0 supports \"chained\" HTTP compression algorithms, meaning that a serverresponse can be compressed multiple times and potentially with different algorithms. The number of acceptable \"links\" in this \"decompression chain\" was unbounded, allowing a malicious server to insert a virtually unlimited number of compression steps.The use of such a decompression chain could result in a \"malloc bomb\", makingcurl end up spending enormous amounts of allocated heap memory, or trying toand returning out of memory errors.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-32206"
    },
    {
      "cve": "CVE-2022-32207",
      "cwe": {
        "id": "CWE-276",
        "name": "Incorrect Default Permissions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl \u003c 7.84.0 saves cookies, alt-svc and hsts data to local files, it makes the operation atomic by finalizing the operation with a rename from a temporary name to the final target file name.In that rename operation, it might accidentally *widen* the permissions for the target file, leaving the updated file accessible to more users than intended.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-32207"
    },
    {
      "cve": "CVE-2022-32208",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl \u003c 7.84.0 does FTP transfers secured by krb5, it handles message verification failures wrongly. This flaw makes it possible for a Man-In-The-Middle attack to go unnoticed and even allows it to inject data to the client.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-32208"
    },
    {
      "cve": "CVE-2022-32221",
      "cwe": {
        "id": "CWE-440",
        "name": "Expected Behavior Violation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When doing HTTP(S) transfers, libcurl might erroneously use the read callback (`CURLOPT_READFUNCTION`) to ask for data to send, even when the `CURLOPT_POSTFIELDS` option has been set, if the same handle previously was used to issue a `PUT` request which used that callback. This flaw may surprise the application and cause it to misbehave and either send off the wrong data or use memory after free or similar in the subsequent `POST` request. The problem exists in the logic for a reused handle when it is changed from a PUT to a POST.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-32221"
    },
    {
      "cve": "CVE-2022-35252",
      "cwe": {
        "id": "CWE-1286",
        "name": "Improper Validation of Syntactic Correctness of Input"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl is used to retrieve and parse cookies from a HTTP(S) server, itaccepts cookies using control codes that when later are sent back to a HTTPserver might make the server return 400 responses. Effectively allowing a\"sister site\" to deny service to all siblings.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-35252"
    },
    {
      "cve": "CVE-2022-35260",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl can be told to parse a `.netrc` file for credentials. If that file endsin a line with 4095 consecutive non-white space letters and no newline, curlwould first read past the end of the stack-based buffer, and if the readworks, write a zero byte beyond its boundary.This will in most cases cause a segfault or similar, but circumstances might also cause different outcomes.If a malicious user can provide a custom netrc file to an application or otherwise affect its contents, this flaw could be used as denial-of-service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-35260"
    },
    {
      "cve": "CVE-2022-35737",
      "cwe": {
        "id": "CWE-129",
        "name": "Improper Validation of Array Index"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 1.0.12 through 3.39.x before 3.39.2 sometimes allows an array-bounds overflow if billions of bytes are used in a string argument to a C API.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-35737"
    },
    {
      "cve": "CVE-2022-37434",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "zlib through 1.2.12 has a heap-based buffer over-read or buffer overflow in inflate in inflate.c via a large gzip header extra field. NOTE: only applications that call inflateGetHeader are affected. Some common applications bundle the affected zlib source code but may be unable to call inflateGetHeader (e.g., see the nodejs/node reference).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-37434"
    },
    {
      "cve": "CVE-2022-37454",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Keccak XKCP SHA-3 reference implementation before fdc6fef has an integer overflow and resultant buffer overflow that allows attackers to execute arbitrary code or eliminate expected cryptographic properties. This occurs in the sponge function interface.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-37454"
    },
    {
      "cve": "CVE-2022-40303",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.3. When parsing a multi-gigabyte XML document with the XML_PARSE_HUGE parser option enabled, several integer counters can overflow. This results in an attempt to access an array at a negative 2GB offset, typically leading to a segmentation fault.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-40303"
    },
    {
      "cve": "CVE-2022-40304",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.3. Certain invalid XML entity definitions can corrupt a hash table key, potentially leading to subsequent logic errors. In one case, a double-free can be provoked.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-40304"
    },
    {
      "cve": "CVE-2022-40674",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libexpat before 2.4.9 has a use-after-free in the doContent function in xmlparse.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-40674"
    },
    {
      "cve": "CVE-2022-42898",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "PAC parsing in MIT Kerberos 5 (aka krb5) before 1.19.4 and 1.20.x before 1.20.1 has integer overflows that may lead to remote code execution (in KDC, kadmind, or a GSS or Kerberos application server) on 32-bit platforms (which have a resultant heap-based buffer overflow), and cause a denial of service on other platforms. This occurs in krb5_pac_parse in lib/krb5/krb/pac.c. Heimdal before 7.7.1 has \"a similar bug.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-42898"
    },
    {
      "cve": "CVE-2022-42915",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl before 7.86.0 has a double free. If curl is told to use an HTTP proxy for a transfer with a non-HTTP(S) URL, it sets up the connection to the remote server by issuing a CONNECT request to the proxy, and then tunnels the rest of the protocol through. An HTTP proxy might refuse this request (HTTP proxies often only allow outgoing connections to specific port numbers, like 443 for HTTPS) and instead return a non-200 status code to the client. Due to flaws in the error/cleanup handling, this could trigger a double free in curl if one of the following schemes were used in the URL for the transfer: dict, gopher, gophers, ldap, ldaps, rtmp, rtmps, or telnet. The earliest affected version is 7.77.0.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-42915"
    },
    {
      "cve": "CVE-2022-42916",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In curl before 7.86.0, the HSTS check could be bypassed to trick it into staying with HTTP. Using its HSTS support, curl can be instructed to use HTTPS directly (instead of using an insecure cleartext HTTP step) even when HTTP is provided in the URL. This mechanism could be bypassed if the host name in the given URL uses IDN characters that get replaced with ASCII counterparts as part of the IDN conversion, e.g., using the character UTF-8 U+3002 (IDEOGRAPHIC FULL STOP) instead of the common ASCII full stop of U+002E (.). The earliest affected version is 7.77.0 2021-05-26.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-42916"
    },
    {
      "cve": "CVE-2022-43551",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability exists in curl \u003c7.87.0 HSTS check that could be bypassed to trick it to keep using HTTP. Using its HSTS support, curl can be instructed to use HTTPS instead of using an insecure clear-text HTTP step even when HTTP is provided in the URL. However, the HSTS mechanism could be bypassed if the host name in the given URL first uses IDN characters that get replaced to ASCII counterparts as part of the IDN conversion. Like using the character UTF-8 U+3002 (IDEOGRAPHIC FULL STOP) instead of the common ASCII full stop U+002E (.). Then in a subsequent request, it does not detect the HSTS state and makes a clear text transfer. Because it would store the info IDN encoded but look for it IDN decoded.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-43551"
    },
    {
      "cve": "CVE-2022-43552",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl can be asked to tunnel virtually all protocols it supports through an HTTP proxy. HTTP proxies can (and often do) deny such tunnel operations using an appropriate HTTP error response code. When getting denied to tunnel the specific protocols SMB or TELNET, curl would use a heap-allocated struct after it had been freed, in its transfer shutdown code path.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-43552"
    },
    {
      "cve": "CVE-2022-43680",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libexpat through 2.4.9, there is a use-after free caused by overeager destruction of a shared DTD in XML_ExternalEntityParserCreate in out-of-memory situations.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-43680"
    },
    {
      "cve": "CVE-2022-45061",
      "cwe": {
        "id": "CWE-407",
        "name": "Inefficient Algorithmic Complexity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in Python before 3.11.1. An unnecessary quadratic algorithm exists in one path when processing some inputs to the IDNA (RFC 3490) decoder, such that a crafted, unreasonably long name being presented to the decoder could lead to a CPU denial of service. Hostnames are often supplied by remote servers that could be controlled by a malicious actor; in such a scenario, they could trigger excessive CPU consumption on the client attempting to make use of an attacker-supplied supposed hostname. For example, the attack payload could be placed in the Location header of an HTTP response with status code 302. A fix is planned in 3.11.1, 3.10.9, 3.9.16, 3.8.16, and 3.7.16.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-45061"
    },
    {
      "cve": "CVE-2022-45873",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "systemd 250 and 251 allows local users to achieve a systemd-coredump deadlock by triggering a crash that has a long backtrace. This occurs in parse_elf_object in shared/elf-util.c. The exploitation methodology is to crash a binary calling the same function recursively, and put it in a deeply nested directory to make its backtrace large enough to cause the deadlock. This must be done 16 times when MaxConnections=16 is set for the systemd/units/systemd-coredump.socket file.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-45873"
    },
    {
      "cve": "CVE-2022-46908",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite through 3.40.0, when relying on --safe for execution of an untrusted CLI script, does not properly implement the azProhibitedFunctions protection mechanism, and instead allows UDF functions such as WRITEFILE.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-46908"
    },
    {
      "cve": "CVE-2022-48303",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU Tar through 1.34 has a one-byte out-of-bounds read that results in use of uninitialized memory for a conditional jump. Exploitation to change the flow of control has not been demonstrated. The issue occurs in from_header in list.c via a V7 archive in which mtime has approximately 11 whitespace characters.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-48303"
    },
    {
      "cve": "CVE-2022-48522",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Perl 5.34.0, function S_find_uninit_var in sv.c has a stack-based crash that can lead to remote code execution or local privilege escalation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-48522"
    },
    {
      "cve": "CVE-2022-48560",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free exists in Python through 3.9 via heappushpop in heapq.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-48560"
    },
    {
      "cve": "CVE-2023-0215",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may also be called directly by end user applications. The function receives a BIO from the caller, prepends a new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid, the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call BIO_pop() on the BIO. This internal function is in turn called by the public API functions PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1, SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL cms and smime command line applications are similarly affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-0215"
    },
    {
      "cve": "CVE-2023-0286",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName. X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these inputs, the other input must already contain an X.400 address as a CRL distribution point, which is uncommon. As such, this vulnerability is most likely to only affect applications which have implemented their own functionality for retrieving CRLs over a network.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-0286"
    },
    {
      "cve": "CVE-2023-0361",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing side-channel in the handling of RSA ClientKeyExchange messages was discovered in GnuTLS. This side-channel can be sufficient to recover the key encrypted in the RSA ciphertext across a network in a Bleichenbacher style attack. To achieve a successful decryption the attacker would need to send a large amount of specially crafted messages to the vulnerable server. By recovering the secret from the ClientKeyExchange message, the attacker would be able to decrypt the application data exchanged over that connection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-0361"
    },
    {
      "cve": "CVE-2023-0464",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security vulnerability has been identified in all supported versions of OpenSSL related to the verification of X.509 certificate chains that include policy constraints. Attackers may be able to exploit this vulnerability by creating a malicious certificate chain that triggers exponential use of computational resources, leading to a denial-of-service (DoS) attack on affected systems.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing the `-policy` argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-0464"
    },
    {
      "cve": "CVE-2023-0465",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Applications that use a non-default option when verifying certificates may be\r\nvulnerable to an attack from a malicious CA to circumvent certain checks.\r\n\r\nInvalid certificate policies in leaf certificates are silently ignored by\r\nOpenSSL and other certificate policy checks are skipped for that certificate.\r\nA malicious CA could use this to deliberately assert invalid certificate policies\r\nin order to circumvent policy checking on the certificate altogether.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing\r\nthe `-policy` argument to the command line utilities or by calling the\r\n`X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-0465"
    },
    {
      "cve": "CVE-2023-0466",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function X509_VERIFY_PARAM_add0_policy() is documented to\nimplicitly enable the certificate policy check when doing certificate\nverification. However the implementation of the function does not\nenable the check which allows certificates with invalid or incorrect\npolicies to pass the certificate verification.\n\nAs suddenly enabling the policy check could break existing deployments it was\ndecided to keep the existing behavior of the X509_VERIFY_PARAM_add0_policy()\nfunction.\n\nInstead the applications that require OpenSSL to perform certificate\npolicy check need to use X509_VERIFY_PARAM_set1_policies() or explicitly\nenable the policy check by calling X509_VERIFY_PARAM_set_flags() with\nthe X509_V_FLAG_POLICY_CHECK flag argument.\n\nCertificate policy checks are disabled by default in OpenSSL and are not\ncommonly used by applications.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-0466"
    },
    {
      "cve": "CVE-2023-0687",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in GNU C Library 2.38. It has been declared as critical. This vulnerability affects the function __monstartup of the file gmon.c of the component Call Graph Monitor. The manipulation leads to buffer overflow. It is recommended to apply a patch to fix this issue. VDB-220246 is the identifier assigned to this vulnerability. NOTE: The real existence of this vulnerability is still doubted at the moment. The inputs that induce this vulnerability are basically addresses of the running application that is built with gmon enabled. It\u0027s basically trusted input or input that needs an actual security flaw to be compromised or controlled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:H/PR:L/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-0687"
    },
    {
      "cve": "CVE-2023-1077",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, pick_next_rt_entity() may return a type confused entry, not detected by the BUG_ON condition, as the confused entry will not be NULL, but list_head.The buggy error condition would lead to a type confused entry with the list head,which would then be used as a type confused sched_rt_entity,causing memory corruption.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-1077"
    },
    {
      "cve": "CVE-2023-1206",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A hash collision flaw was found in the IPv6 connection lookup table in the Linux kernel\u2019s IPv6 functionality when a user makes a new kind of SYN flood attack. A user located in the local network or with a high bandwidth connection can increase the CPU usage of the server that accepts IPV6 connections up to 95%.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-1206"
    },
    {
      "cve": "CVE-2023-2650",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Processing some specially crafted ASN.1 object identifiers or data containing them may be very slow. Impact summary: Applications that use OBJ_obj2txt() directly, or use any of the OpenSSL subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS with no message size limit may experience notable to very long delays when processing those messages, which may lead to a Denial of Service. An OBJECT IDENTIFIER is composed of a series of numbers - sub-identifiers - most of which have no size limit. OBJ_obj2txt() may be used to translate an ASN.1 OBJECT IDENTIFIER given in DER encoding form (using the OpenSSL type ASN1_OBJECT) to its canonical numeric text form, which are the sub-identifiers of the OBJECT IDENTIFIER in decimal form, separated by periods. When one of the sub-identifiers in the OBJECT IDENTIFIER is very large (these are sizes that are seen as absurdly large, taking up tens or hundreds of KiBs), the translation to a decimal number in text may take a very long time. The time complexity is O(square(n)) with \u0027n\u0027 being the size of the sub-identifiers in bytes (*). With OpenSSL 3.0, support to fetch cryptographic algorithms using names / identifiers in string form was introduced. This includes using OBJECT IDENTIFIERs in canonical numeric text form as identifiers for fetching algorithms. Such OBJECT IDENTIFIERs may be received through the ASN.1 structure AlgorithmIdentifier, which is commonly used in multiple protocols to specify what cryptographic algorithm should be used to sign or verify, encrypt or decrypt, or digest passed data. Applications that call OBJ_obj2txt() directly with untrusted data are affected, with any version of OpenSSL. If the use is for the mere purpose of display, the severity is considered low. In OpenSSL 3.0 and newer, this affects the subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS. It also impacts anything that processes X.509 certificates, including simple things like verifying its signature. The impact on TLS is relatively low, because all versions of OpenSSL have a 100KiB limit on the peer\u0027s certificate chain. Additionally, this only impacts clients, or servers that have explicitly enabled client authentication. In OpenSSL 1.1.1 and 1.0.2, this only affects displaying diverse objects, such as X.509 certificates. This is assumed to not happen in such a way that it would cause a Denial of Service, so these versions are considered not affected by this issue in such a way that it would be cause for concern, and the severity is therefore considered low.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-2650"
    },
    {
      "cve": "CVE-2023-2953",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in openldap. This security flaw causes a null pointer dereference in ber_memalloc_x() function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-2953"
    },
    {
      "cve": "CVE-2023-3212",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference issue was found in the gfs2 file system in the Linux kernel. It occurs on corrupt gfs2 file systems when the evict code tries to reference the journal descriptor structure after it has been freed and set to NULL. A privileged local user could use this flaw to cause a kernel panic.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-3212"
    },
    {
      "cve": "CVE-2023-3446",
      "cwe": {
        "id": "CWE-1333",
        "name": "Inefficient Regular Expression Complexity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus (\u0027p\u0027 parameter) is not too large. Trying to use a very large modulus is slow and OpenSSL will not normally use a modulus which is over 10,000 bits in length. However the DH_check() function checks numerous aspects of the key or parameters that have been supplied. Some of those checks use the supplied modulus value even if it has already been found to be too large. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulernable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \u0027-check\u0027 option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-3446"
    },
    {
      "cve": "CVE-2023-3609",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: cls_u32 component can be exploited to achieve local privilege escalation.\r\n\r\nIf tcf_change_indev() fails, u32_set_parms() will immediately return an error after incrementing or decrementing the reference counter in tcf_bind_filter(). If an attacker can control the reference counter and set it to zero, they can cause the reference to be freed, leading to a use-after-free vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-3609"
    },
    {
      "cve": "CVE-2023-3611",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds write vulnerability in the Linux kernel\u0027s net/sched: sch_qfq component can be exploited to achieve local privilege escalation.\r\n\r\nThe qfq_change_agg() function in net/sched/sch_qfq.c allows an out-of-bounds write because lmax is updated according to packet sizes without bounds checks.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-3611"
    },
    {
      "cve": "CVE-2023-3772",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel\u0027s IP framework for transforming packets (XFRM subsystem). This issue may allow a malicious user with CAP_NET_ADMIN privileges to directly dereference a NULL pointer in xfrm_update_ae_params(), leading to a possible kernel crash and denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-3772"
    },
    {
      "cve": "CVE-2023-3817",
      "cwe": {
        "id": "CWE-834",
        "name": "Excessive Iteration"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. After fixing CVE-2023-3446 it was discovered that a large q parameter value can also trigger an overly long computation during some of these checks. A correct q value, if present, cannot be larger than the modulus p parameter, thus it is unnecessary to perform these checks if q is larger than p. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \"-check\" option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-3817"
    },
    {
      "cve": "CVE-2023-4016",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Under some circumstances, this weakness allows a user who has access to run the \u201cps\u201d utility on a machine, the ability to write almost unlimited amounts of unfiltered data into the process heap.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 2.5,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4016"
    },
    {
      "cve": "CVE-2023-4039",
      "cwe": {
        "id": "CWE-693",
        "name": "Protection Mechanism Failure"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A failure in the -fstack-protector feature in GCC-based toolchains \nthat target AArch64 allows an attacker to exploit an existing buffer \noverflow in dynamically-sized local variables in your application \nwithout this being detected. This stack-protector failure only applies \nto C99-style dynamically-sized local variables or those created using \nalloca(). The stack-protector operates as intended for statically-sized \nlocal variables.\n\nThe default behavior when the stack-protector \ndetects an overflow is to terminate your application, resulting in \ncontrolled loss of availability. An attacker who can exploit a buffer \noverflow without triggering the stack-protector might be able to change \nprogram flow control to cause an uncontrolled loss of availability or to\n go further and affect confidentiality or integrity.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4039"
    },
    {
      "cve": "CVE-2023-4527",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. When the getaddrinfo function is called with the AF_UNSPEC address family and the system is configured with no-aaaa mode via /etc/resolv.conf, a DNS response via TCP larger than 2048 bytes can potentially disclose stack contents through the function returned address data, and may cause a crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4527"
    },
    {
      "cve": "CVE-2023-4623",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: sch_hfsc (HFSC qdisc traffic control) component can be exploited to achieve local privilege escalation.\n\nIf a class with a link-sharing curve (i.e. with the HFSC_FSC flag set) has a parent without a link-sharing curve, then init_vf() will call vttree_insert() on the parent, but vttree_remove() will be skipped in update_vf(). This leaves a dangling pointer that can cause a use-after-free.\n\nWe recommend upgrading past commit b3d26c5702c7d6c45456326e56d2ccf3f103e60f.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4623"
    },
    {
      "cve": "CVE-2023-4806",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. In an extremely rare situation, the getaddrinfo function may access memory that has been freed, resulting in an application crash. This issue is only exploitable when a NSS module implements only the _nss_*_gethostbyname2_r and _nss_*_getcanonname_r hooks without implementing the _nss_*_gethostbyname3_r hook. The resolved name should return a large number of IPv6 and IPv4, and the call to the getaddrinfo function should have the AF_INET6 address family with AI_CANONNAME, AI_ALL and AI_V4MAPPED as flags.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4806"
    },
    {
      "cve": "CVE-2023-4807",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: The POLY1305 MAC (message authentication code) implementation contains a bug that might corrupt the internal state of applications on the Windows 64 platform when running on newer X86_64 processors supporting the AVX512-IFMA instructions. Impact summary: If in an application that uses the OpenSSL library an attacker can influence whether the POLY1305 MAC algorithm is used, the application state might be corrupted with various application dependent consequences. The POLY1305 MAC (message authentication code) implementation in OpenSSL does not save the contents of non-volatile XMM registers on Windows 64 platform when calculating the MAC of data larger than 64 bytes. Before returning to the caller all the XMM registers are set to zero rather than restoring their previous content. The vulnerable code is used only on newer x86_64 processors supporting the AVX512-IFMA instructions. The consequences of this kind of internal application state corruption can be various - from no consequences, if the calling application does not depend on the contents of non-volatile XMM registers at all, to the worst consequences, where the attacker could get complete control of the application process. However given the contents of the registers are just zeroized so the attacker cannot put arbitrary values inside, the most likely consequence, if any, would be an incorrect result of some application dependent calculations or a crash leading to a denial of service. The POLY1305 MAC algorithm is most frequently used as part of the CHACHA20-POLY1305 AEAD (authenticated encryption with associated data) algorithm. The most common usage of this AEAD cipher is with TLS protocol versions 1.2 and 1.3 and a malicious client can influence whether this AEAD cipher is used by the server. This implies that server applications using OpenSSL can be potentially impacted. However we are currently not aware of any concrete application that would be affected by this issue therefore we consider this a Low severity security issue. As a workaround the AVX512-IFMA instructions support can be disabled at runtime by setting the environment variable OPENSSL_ia32cap: OPENSSL_ia32cap=:~0x200000 The FIPS provider is not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4807"
    },
    {
      "cve": "CVE-2023-4813",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. In an uncommon situation, the gaih_inet function may use memory that has been freed, resulting in an application crash. This issue is only exploitable when the getaddrinfo function is called and the hosts database in /etc/nsswitch.conf is configured with SUCCESS=continue or SUCCESS=merge.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4813"
    },
    {
      "cve": "CVE-2023-4911",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A buffer overflow was discovered in the GNU C Library\u0027s dynamic loader ld.so while processing the GLIBC_TUNABLES environment variable. This issue could allow a local attacker to use maliciously crafted GLIBC_TUNABLES environment variables when launching binaries with SUID permission to execute code with elevated privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4911"
    },
    {
      "cve": "CVE-2023-4921",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: sch_qfq component can be exploited to achieve local privilege escalation.\n\nWhen the plug qdisc is used as a class of the qfq qdisc, sending network packets triggers use-after-free in qfq_dequeue() due to the incorrect .peek handler of sch_plug and lack of error checking in agg_dequeue().\n\nWe recommend upgrading past commit 8fc134fee27f2263988ae38920bc03da416b03d8.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4921"
    },
    {
      "cve": "CVE-2023-5156",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the GNU C Library. A recent fix for CVE-2023-4806 introduced the potential for a memory leak, which may result in an application crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-5156"
    },
    {
      "cve": "CVE-2023-5678",
      "cwe": {
        "id": "CWE-754",
        "name": "Improper Check for Unusual or Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Generating excessively long X9.42 DH keys or checking excessively long X9.42 DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_generate_key() to generate an X9.42 DH key may experience long delays. Likewise, applications that use DH_check_pub_key(), DH_check_pub_key_ex() or EVP_PKEY_public_check() to check an X9.42 DH key or X9.42 DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. While DH_check() performs all the necessary checks (as of CVE-2023-3817), DH_check_pub_key() doesn\u0027t make any of these checks, and is therefore vulnerable for excessively large P and Q parameters. Likewise, while DH_generate_key() performs a check for an excessively large P, it doesn\u0027t check for an excessively large Q. An application that calls DH_generate_key() or DH_check_pub_key() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. DH_generate_key() and DH_check_pub_key() are also called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_pub_key_ex(), EVP_PKEY_public_check(), and EVP_PKEY_generate(). Also vulnerable are the OpenSSL pkey command line application when using the \"-pubcheck\" option, as well as the OpenSSL genpkey command line application. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-5678"
    },
    {
      "cve": "CVE-2023-5717",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap out-of-bounds write vulnerability in the Linux kernel\u0027s Linux Kernel Performance Events (perf) component can be exploited to achieve local privilege escalation.\r\n\r\nIf perf_read_group() is called while an event\u0027s sibling_list is smaller than its child\u0027s sibling_list, it can increment or write to memory locations outside of the allocated buffer.\r\n\r\nWe recommend upgrading past commit 32671e3799ca2e4590773fd0e63aaa4229e50c06.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-5717"
    },
    {
      "cve": "CVE-2023-5981",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found that the response times to malformed ciphertexts in RSA-PSK ClientKeyExchange differ from response times of ciphertexts with correct PKCS#1 v1.5 padding.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-5981"
    },
    {
      "cve": "CVE-2023-23914",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A cleartext transmission of sensitive information vulnerability exists in curl \u003cv7.88.0 that could cause HSTS functionality fail when multiple URLs are requested serially. Using its HSTS support, curl can be instructed to use HTTPS instead of usingan insecure clear-text HTTP step even when HTTP is provided in the URL. ThisHSTS mechanism would however surprisingly be ignored by subsequent transferswhen done on the same command line because the state would not be properlycarried on.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-23914"
    },
    {
      "cve": "CVE-2023-23915",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A cleartext transmission of sensitive information vulnerability exists in curl \u003cv7.88.0 that could cause HSTS functionality to behave incorrectly when multiple URLs are requested in parallel. Using its HSTS support, curl can be instructed to use HTTPS instead of using an insecure clear-text HTTP step even when HTTP is provided in the URL. This HSTS mechanism would however surprisingly fail when multiple transfers are done in parallel as the HSTS cache file gets overwritten by the most recentlycompleted transfer. A later HTTP-only transfer to the earlier host name would then *not* get upgraded properly to HSTS.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-23915"
    },
    {
      "cve": "CVE-2023-23916",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An allocation of resources without limits or throttling vulnerability exists in curl \u003cv7.88.0 based on the \"chained\" HTTP compression algorithms, meaning that a server response can be compressed multiple times and potentially with differentalgorithms. The number of acceptable \"links\" in this \"decompression chain\" wascapped, but the cap was implemented on a per-header basis allowing a maliciousserver to insert a virtually unlimited number of compression steps simply byusing many headers. The use of such a decompression chain could result in a \"malloc bomb\", making curl end up spending enormous amounts of allocated heap memory, or trying to and returning out of memory errors.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-23916"
    },
    {
      "cve": "CVE-2023-24329",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue in the urllib.parse component of Python before 3.11.4 allows attackers to bypass blocklisting methods by supplying a URL that starts with blank characters.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-24329"
    },
    {
      "cve": "CVE-2023-25136",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "OpenSSH server (sshd) 9.1 introduced a double-free vulnerability during options.kex_algorithms handling. This is fixed in OpenSSH 9.2. The double free can be leveraged, by an unauthenticated remote attacker in the default configuration, to jump to any location in the sshd address space. One third-party report states \"remote code execution is theoretically possible.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-25136"
    },
    {
      "cve": "CVE-2023-25139",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "sprintf in the GNU C Library (glibc) 2.37 has a buffer overflow (out-of-bounds write) in some situations with a correct buffer size. This is unrelated to CWE-676. It may write beyond the bounds of the destination buffer when attempting to write a padded, thousands-separated string representation of a number, if the buffer is allocated the exact size required to represent that number as a string. For example, 1,234,567 (with padding to 13) overflows by two bytes.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-25139"
    },
    {
      "cve": "CVE-2023-26604",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "systemd before 247 does not adequately block local privilege escalation for some Sudo configurations, e.g., plausible sudoers files in which the \"systemctl status\" command may be executed. Specifically, systemd does not set LESSSECURE to 1, and thus other programs may be launched from the less program. This presents a substantial security risk when running systemctl from Sudo, because less executes as root when the terminal size is too small to show the complete systemctl output.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-26604"
    },
    {
      "cve": "CVE-2023-27371",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU libmicrohttpd before 0.9.76 allows remote DoS (Denial of Service) due to improper parsing of a multipart/form-data boundary in the postprocessor.c MHD_create_post_processor() method. This allows an attacker to remotely send a malicious HTTP POST packet that includes one or more \u0027\\0\u0027 bytes in a multipart/form-data boundary field, which - assuming a specific heap layout - will result in an out-of-bounds read and a crash in the find_boundary() function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AC:H/AV:N/A:H/C:N/I:N/PR:N/S:U/UI:N",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-27371"
    },
    {
      "cve": "CVE-2023-27533",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability in input validation exists in curl \u003c8.0 during communication using the TELNET protocol may allow an attacker to pass on maliciously crafted user name and \"telnet options\" during server negotiation. The lack of proper input scrubbing allows an attacker to send content or perform option negotiation without the application\u0027s intent. This vulnerability could be exploited if an application allows user input, thereby enabling attackers to execute arbitrary code on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-27533"
    },
    {
      "cve": "CVE-2023-27534",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A path traversal vulnerability exists in curl \u003c8.0.0 SFTP implementation causes the tilde (~) character to be wrongly replaced when used as a prefix in the first path element, in addition to its intended use as the first element to indicate a path relative to the user\u0027s home directory. Attackers can exploit this flaw to bypass filtering or execute arbitrary code by crafting a path like /~2/foo while accessing a server with a specific user.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-27534"
    },
    {
      "cve": "CVE-2023-27535",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An authentication bypass vulnerability exists in libcurl \u003c8.0.0 in the FTP connection reuse feature that can result in wrong credentials being used during subsequent transfers. Previously created connections are kept in a connection pool for reuse if they match the current setup. However, certain FTP settings such as CURLOPT_FTP_ACCOUNT, CURLOPT_FTP_ALTERNATIVE_TO_USER, CURLOPT_FTP_SSL_CCC, and CURLOPT_USE_SSL were not included in the configuration match checks, causing them to match too easily. This could lead to libcurl using the wrong credentials when performing a transfer, potentially allowing unauthorized access to sensitive information.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-27535"
    },
    {
      "cve": "CVE-2023-27536",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An authentication bypass vulnerability exists libcurl \u003c8.0.0 in the connection reuse feature which can reuse previously established connections with incorrect user permissions due to a failure to check for changes in the CURLOPT_GSSAPI_DELEGATION option. This vulnerability affects krb5/kerberos/negotiate/GSSAPI transfers and could potentially result in unauthorized access to sensitive information. The safest option is to not reuse connections if the CURLOPT_GSSAPI_DELEGATION option has been changed.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-27536"
    },
    {
      "cve": "CVE-2023-27537",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A double free vulnerability exists in libcurl \u003c8.0.0 when sharing HSTS data between separate \"handles\". This sharing was introduced without considerations for do this sharing across separate threads but there was no indication of this fact in the documentation. Due to missing mutexes or thread locks, two threads sharing the same HSTS data could end up doing a double-free or use-after-free.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-27537"
    },
    {
      "cve": "CVE-2023-27538",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl would reuse a previously created connection even when an SSH related option had been changed that should have prohibited reuse. libcurl keeps previously used connections in a connection pool for subsequent transfers to reuse if one of them matches the setup. However, two SSH settings were left out from the configuration match checks, making them match too easily.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-27538"
    },
    {
      "cve": "CVE-2023-28484",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libxml2 before 2.10.4, parsing of certain invalid XSD schemas can lead to a NULL pointer dereference and subsequently a segfault. This occurs in xmlSchemaFixupComplexType in xmlschemas.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-28484"
    },
    {
      "cve": "CVE-2023-28531",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ssh-add in OpenSSH before 9.3 adds smartcard keys to ssh-agent without the intended per-hop destination constraints. The earliest affected version is 8.9.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-28531"
    },
    {
      "cve": "CVE-2023-29383",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Shadow 4.13, it is possible to inject control characters into fields provided to the SUID program chfn (change finger). Although it is not possible to exploit this directly (e.g., adding a new user fails because \\n is in the block list), it is possible to misrepresent the /etc/passwd file when viewed. Use of \\r manipulations and Unicode characters to work around blocking of the : character make it possible to give the impression that a new user has been added. In other words, an adversary may be able to convince a system administrator to take the system offline (an indirect, social-engineered denial of service) by demonstrating that \"cat /etc/passwd\" shows a rogue user account.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-29383"
    },
    {
      "cve": "CVE-2023-29469",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.4. When hashing empty dict strings in a crafted XML document, xmlDictComputeFastKey in dict.c can produce non-deterministic values, leading to various logic and memory errors, such as a double free. This behavior occurs because there is an attempt to use the first byte of an empty string, and any value is possible (not solely the \u0027\\0\u0027 value).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-29469"
    },
    {
      "cve": "CVE-2023-29491",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ncurses before 6.4 20230408, when used by a setuid application, allows local users to trigger security-relevant memory corruption via malformed data in a terminfo database file that is found in $HOME/.terminfo or reached via the TERMINFO or TERM environment variable.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-29491"
    },
    {
      "cve": "CVE-2023-29499",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GLib. GVariant deserialization fails to validate that the input conforms to the expected format, leading to denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-29499"
    },
    {
      "cve": "CVE-2023-31085",
      "cwe": {
        "id": "CWE-369",
        "name": "Divide By Zero"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in drivers/mtd/ubi/cdev.c in the Linux kernel 6.2. There is a divide-by-zero error in do_div(sz,mtd-\u003eerasesize), used indirectly by ctrl_cdev_ioctl, when mtd-\u003eerasesize is 0.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-31085"
    },
    {
      "cve": "CVE-2023-32611",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GLib. GVariant deserialization is vulnerable to a slowdown issue where a crafted GVariant can cause excessive processing, leading to denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-32611"
    },
    {
      "cve": "CVE-2023-32636",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glib, where the gvariant deserialization code is vulnerable to a denial of service introduced by additional input validation added to resolve CVE-2023-29499. The offset table validation may be very slow. This bug does not affect any released version of glib but does affect glib distributors who followed the guidance of glib developers to backport the initial fix for CVE-2023-29499.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-32636"
    },
    {
      "cve": "CVE-2023-32643",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GLib. The GVariant deserialization code is vulnerable to a heap buffer overflow introduced by the fix for CVE-2023-32665. This bug does not affect any released version of GLib, but does affect GLib distributors who followed the guidance of GLib developers to backport the initial fix for CVE-2023-32665.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-32643"
    },
    {
      "cve": "CVE-2023-32665",
      "cwe": {
        "id": "CWE-502",
        "name": "Deserialization of Untrusted Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GLib. GVariant deserialization is vulnerable to an exponential blowup issue where a crafted GVariant can cause excessive processing, leading to denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-32665"
    },
    {
      "cve": "CVE-2023-34319",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The fix for XSA-423 added logic to Linux\u0027es netback driver to deal with\na frontend splitting a packet in a way such that not all of the headers\nwould come in one piece.  Unfortunately the logic introduced there\ndidn\u0027t account for the extreme case of the entire packet being split\ninto as many pieces as permitted by the protocol, yet still being\nsmaller than the area that\u0027s specially dealt with to keep all (possible)\nheaders together.  Such an unusual packet would therefore trigger a\nbuffer overrun in the driver.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-34319"
    },
    {
      "cve": "CVE-2023-34969",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "D-Bus before 1.15.6 sometimes allows unprivileged users to crash dbus-daemon. If a privileged user with control over the dbus-daemon is using the org.freedesktop.DBus.Monitoring interface to monitor message bus traffic, then an unprivileged user with the ability to connect to the same dbus-daemon can cause a dbus-daemon crash under some circumstances via an unreplyable message. When done on the well-known system bus, this is a denial-of-service vulnerability. The fixed versions are 1.12.28, 1.14.8, and 1.15.6.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-34969"
    },
    {
      "cve": "CVE-2023-35001",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Linux Kernel nftables Out-Of-Bounds Read/Write Vulnerability; nft_byteorder poorly handled vm register contents when CAP_NET_ADMIN is in any user or network namespace",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-35001"
    },
    {
      "cve": "CVE-2023-35945",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Envoy is a cloud-native high-performance edge/middle/service proxy. Envoy\u2019s HTTP/2 codec may leak a header map and bookkeeping structures upon receiving `RST_STREAM` immediately followed by the `GOAWAY` frames from an upstream server. In nghttp2, cleanup of pending requests due to receipt of the `GOAWAY` frame skips de-allocation of the bookkeeping structure and pending compressed header. The error return [code path] is taken if connection is already marked for not sending more requests due to `GOAWAY` frame. The clean-up code is right after the return statement, causing memory leak. Denial of service through memory exhaustion. This vulnerability was patched in versions(s) 1.26.3, 1.25.8, 1.24.9, 1.23.11.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-35945"
    },
    {
      "cve": "CVE-2023-38408",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The PKCS#11 feature in ssh-agent in OpenSSH before 9.3p2 has an insufficiently trustworthy search path, leading to remote code execution if an agent is forwarded to an attacker-controlled system. (Code in /usr/lib is not necessarily safe for loading into ssh-agent.) NOTE: this issue exists because of an incomplete fix for CVE-2016-10009.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.7,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:R/S:C/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-38408"
    },
    {
      "cve": "CVE-2023-38545",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This flaw makes curl overflow a heap based buffer in the SOCKS5 proxy handshake.\r\n\r\nWhen curl is asked to pass along the hostname to the SOCKS5 proxy to allow that to resolve the address instead of it getting done by curl itself, the maximum length that hostname can be is 255 bytes.\r\n\r\nIf the hostname is detected to be longer than 255 bytes, curl switches to local name resolving and instead passes on the resolved address only to the proxy. Due to a bug, the local variable that means \"let the host resolve the name\" could get the wrong value during a slow SOCKS5 handshake, and contrary to the intention, copy the too long hostname to the target buffer instead of copying just the resolved address there.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-38545"
    },
    {
      "cve": "CVE-2023-38546",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This flaw allows an attacker to insert cookies at will into a running program\nusing libcurl, if the specific series of conditions are met.\n\nlibcurl performs transfers. In its API, an application creates \"easy handles\"\nthat are the individual handles for single transfers.\n\nlibcurl provides a function call that duplicates en easy handle called\n[curl_easy_duphandle](https://curl.se/libcurl/c/curl_easy_duphandle.html).\n\nIf a transfer has cookies enabled when the handle is duplicated, the\ncookie-enable state is also cloned - but without cloning the actual\ncookies. If the source handle did not read any cookies from a specific file on\ndisk, the cloned version of the handle would instead store the file name as\n`none` (using the four ASCII letters, no quotes).\n\nSubsequent use of the cloned handle that does not explicitly set a source to\nload cookies from would then inadvertently load cookies from a file named\n`none` - if such a file exists and is readable in the current directory of the\nprogram using libcurl. And if using the correct file format of course.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-38546"
    },
    {
      "cve": "CVE-2023-39128",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU gdb (GDB) 13.0.50.20220805-git was discovered to contain a stack overflow via the function ada_decode at /gdb/ada-lang.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-39128"
    },
    {
      "cve": "CVE-2023-39189",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The nfnl_osf_add_callback function did not validate the user mode controlled opt_num field. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-39189"
    },
    {
      "cve": "CVE-2023-39192",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The xt_u32 module did not validate the fields in the xt_u32 structure. This flaw allows a local privileged attacker to trigger an out-of-bounds read by setting the size fields with a value beyond the array boundaries, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:H/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-39192"
    },
    {
      "cve": "CVE-2023-39193",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The sctp_mt_check did not validate the flag_count field. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-39193"
    },
    {
      "cve": "CVE-2023-39194",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the XFRM subsystem in the Linux kernel. The specific flaw exists within the processing of state filters, which can result in a read past the end of an allocated buffer. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, potentially leading to an information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.2,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:L/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-39194"
    },
    {
      "cve": "CVE-2023-39615",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Xmlsoft Libxml2 v2.11.0 was discovered to contain an out-of-bounds read via the xmlSAX2StartElement() function at /libxml2/SAX2.c. This vulnerability allows attackers to cause a Denial of Service (DoS) via supplying a crafted XML file. NOTE: the vendor\u0027s position is that the product does not support the legacy SAX1 interface with custom callbacks; there is a crash even without crafted input.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-39615"
    },
    {
      "cve": "CVE-2023-40283",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in l2cap_sock_release in net/bluetooth/l2cap_sock.c in the Linux kernel before 6.4.10. There is a use-after-free because the children of an sk are mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-40283"
    },
    {
      "cve": "CVE-2023-42754",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference flaw was found in the Linux kernel ipv4 stack. The socket buffer (skb) was assumed to be associated with a device before calling __ip_options_compile, which is not always the case if the skb is re-routed by ipvs. This issue may allow a local user with CAP_NET_ADMIN privileges to crash the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-42754"
    },
    {
      "cve": "CVE-2023-42755",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the IPv4 Resource Reservation Protocol (RSVP) classifier in the Linux kernel. The xprt pointer may go beyond the linear part of the skb, leading to an out-of-bounds read in the `rsvp_classify` function. This issue may allow a local user to crash the system and cause a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-42755"
    },
    {
      "cve": "CVE-2023-44487",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-44487"
    },
    {
      "cve": "CVE-2023-45322",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 through 2.11.5 has a use-after-free that can only occur after a certain memory allocation fails. This occurs in xmlUnlinkNode in tree.c. NOTE: the vendor\u0027s position is \"I don\u0027t think these issues are critical enough to warrant a CVE ID ... because an attacker typically can\u0027t control when memory allocations fail.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-45322"
    },
    {
      "cve": "CVE-2023-45853",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "MiniZip in zlib through 1.3 has an integer overflow and resultant heap-based buffer overflow in zipOpenNewFileInZip4_64 via a long filename, comment, or extra field. NOTE: MiniZip is not a supported part of the zlib product.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-45853"
    },
    {
      "cve": "CVE-2023-45871",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in drivers/net/ethernet/intel/igb/igb_main.c in the IGB driver in the Linux kernel before 6.5.3. A buffer size may not be adequate for frames larger than the MTU.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-45871"
    }
  ]
}

{
  "document": {
    "aggregate_severity": {
      "namespace": "https://access.redhat.com/security/updates/classification/",
      "text": "Important"
    },
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Copyright \u00a9 Red Hat, Inc. All rights reserved.",
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Red Hat JBoss Core Services Pack Apache Server 2.4.37 Service Pack 3 zip release for RHEL 6, RHEL 7 and Microsoft Windows is available.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.",
        "title": "Topic"
      },
      {
        "category": "general",
        "text": "Red Hat JBoss Core Services is a set of supplementary software for Red Hat JBoss middleware products. This software, such as Apache HTTP Server, is common to multiple JBoss middleware products, and is packaged under Red Hat JBoss Core Services to allow for faster distribution of updates, and for a more consistent update experience.\n\nThis release adds the new Apache HTTP Server 2.4.37 Service Pack 3 packages that are part of the JBoss Core Services offering.\n\nThis release serves as a replacement for Red Hat JBoss Core Services Pack Apache Server 2.4.37 Service Pack 2 and includes bug fixes and enhancements. Refer to the Release Notes for information on the most significant bug fixes and enhancements included in this release.\n\nSecurity fix(es):\n\n* httpd: mod_http2: read-after-free on a string compare (CVE-2019-0196)\n* httpd: mod_http2: possible crash on late upgrade (CVE-2019-0197)\n* httpd: mod_proxy_ftp use of uninitialized value (CVE-2020-1934)\n* nghttp2: overly large SETTINGS frames can lead to DoS (CVE-2020-11080)\n* libxml2: There\u0027s a memory leak in xmlParseBalancedChunkMemoryRecover in parser.c that could result in a crash (CVE-2019-19956)\n* libxml2: memory leak in xmlSchemaPreRun in xmlschemas.c (CVE-2019-20388)\n* libxml2: infinite loop in xmlStringLenDecodeEntities in some end-of-file situations (CVE-2020-7595)\n* expat: large number of colons in input makes parser consume high amount of resources, leading to DoS (CVE-2018-20843)\n* expat: heap-based buffer over-read via crafted XML input (CVE-2019-15903)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.",
        "title": "Details"
      },
      {
        "category": "legal_disclaimer",
        "text": "This content is licensed under the Creative Commons Attribution 4.0 International License (https://creativecommons.org/licenses/by/4.0/). If you distribute this content, or a modified version of it, you must provide attribution to Red Hat Inc. and provide a link to the original.",
        "title": "Terms of Use"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "https://access.redhat.com/security/team/contact/",
      "issuing_authority": "Red Hat Product Security is responsible for vulnerability handling across all Red Hat products and services.",
      "name": "Red Hat Product Security",
      "namespace": "https://www.redhat.com"
    },
    "references": [
      {
        "category": "self",
        "summary": "https://access.redhat.com/errata/RHSA-2020:2646",
        "url": "https://access.redhat.com/errata/RHSA-2020:2646"
      },
      {
        "category": "external",
        "summary": "https://access.redhat.com/security/updates/classification/#important",
        "url": "https://access.redhat.com/security/updates/classification/#important"
      },
      {
        "category": "external",
        "summary": "https://access.redhat.com/jbossnetwork/restricted/listSoftware.html?product=core.service.apachehttp\u0026downloadType=securityPatches\u0026version=2.4.37",
        "url": "https://access.redhat.com/jbossnetwork/restricted/listSoftware.html?product=core.service.apachehttp\u0026downloadType=securityPatches\u0026version=2.4.37"
      },
      {
        "category": "external",
        "summary": "https://access.redhat.com/documentation/en-us/red_hat_jboss_core_services/2.4.37/",
        "url": "https://access.redhat.com/documentation/en-us/red_hat_jboss_core_services/2.4.37/"
      },
      {
        "category": "external",
        "summary": "1695030",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1695030"
      },
      {
        "category": "external",
        "summary": "1695042",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1695042"
      },
      {
        "category": "external",
        "summary": "1723723",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1723723"
      },
      {
        "category": "external",
        "summary": "1752592",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1752592"
      },
      {
        "category": "external",
        "summary": "1788856",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1788856"
      },
      {
        "category": "external",
        "summary": "1799734",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1799734"
      },
      {
        "category": "external",
        "summary": "1799786",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1799786"
      },
      {
        "category": "external",
        "summary": "1820772",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1820772"
      },
      {
        "category": "external",
        "summary": "1844929",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1844929"
      },
      {
        "category": "external",
        "summary": "JBCS-941",
        "url": "https://issues.redhat.com/browse/JBCS-941"
      },
      {
        "category": "self",
        "summary": "Canonical URL",
        "url": "https://security.access.redhat.com/data/csaf/v2/advisories/2020/rhsa-2020_2646.json"
      }
    ],
    "title": "Red Hat Security Advisory: Red Hat JBoss Core Services Apache HTTP Server 2.4.37 SP3 security update",
    "tracking": {
      "current_release_date": "2024-11-05T22:22:14+00:00",
      "generator": {
        "date": "2024-11-05T22:22:14+00:00",
        "engine": {
          "name": "Red Hat SDEngine",
          "version": "4.1.1"
        }
      },
      "id": "RHSA-2020:2646",
      "initial_release_date": "2020-06-22T13:08:26+00:00",
      "revision_history": [
        {
          "date": "2020-06-22T13:08:26+00:00",
          "number": "1",
          "summary": "Initial version"
        },
        {
          "date": "2020-06-22T13:08:26+00:00",
          "number": "2",
          "summary": "Last updated version"
        },
        {
          "date": "2024-11-05T22:22:14+00:00",
          "number": "3",
          "summary": "Last generated version"
        }
      ],
      "status": "final",
      "version": "3"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_name",
                "name": "Red Hat JBoss Core Services 1",
                "product": {
                  "name": "Red Hat JBoss Core Services 1",
                  "product_id": "Red Hat JBoss Core Services 1",
                  "product_identification_helper": {
                    "cpe": "cpe:/a:redhat:jboss_core_services:1"
                  }
                }
              }
            ],
            "category": "product_family",
            "name": "Red Hat JBoss Core Services"
          }
        ],
        "category": "vendor",
        "name": "Red Hat"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2018-20843",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "discovery_date": "2019-06-24T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1723723"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "It was discovered that the \"setElementTypePrefix()\" function incorrectly extracted XML namespace prefixes. By tricking an application into processing a specially crafted XML file, an attacker could cause unusually high consumption of memory resources and possibly lead to a denial of service.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "expat: large number of colons in input makes parser consume high amount of resources, leading to DoS",
          "title": "Vulnerability summary"
        },
        {
          "category": "other",
          "text": "When processing a specially crafted XML file, expat may use more memory than ultimately necessary, which can also lead to increased CPU usage and longer processing times. Depending on available system resources and configuration, this may also lead to the application triggering the Out-Of-Memory-Killer, causing the application to be terminated.",
          "title": "Statement"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "Red Hat JBoss Core Services 1"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2018-20843"
        },
        {
          "category": "external",
          "summary": "RHBZ#1723723",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1723723"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2018-20843",
          "url": "https://www.cve.org/CVERecord?id=CVE-2018-20843"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2018-20843",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2018-20843"
        },
        {
          "category": "external",
          "summary": "https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=931031",
          "url": "https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=931031"
        }
      ],
      "release_date": "2019-06-24T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2020-06-22T13:08:26+00:00",
          "details": "Before applying the update, back up your existing installation, including all applications, configuration files, databases and database settings, and so on.\n\nThe References section of this erratum contains a download link for the update. You must be logged in to download the update.",
          "product_ids": [
            "Red Hat JBoss Core Services 1"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2020:2646"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "Red Hat JBoss Core Services 1"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "expat: large number of colons in input makes parser consume high amount of resources, leading to DoS"
    },
    {
      "cve": "CVE-2019-0196",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "discovery_date": "2019-04-02T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1695030"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A vulnerability was found in Apache HTTP Server 2.4.17 to 2.4.38. Using fuzzed network input, the http/2 request handling could be made to access freed memory in string comparison when determining the method of a request and thus process the request incorrectly.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "httpd: mod_http2: read-after-free on a string compare",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "Red Hat JBoss Core Services 1"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-0196"
        },
        {
          "category": "external",
          "summary": "RHBZ#1695030",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1695030"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-0196",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-0196"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-0196",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-0196"
        },
        {
          "category": "external",
          "summary": "http://www.apache.org/dist/httpd/CHANGES_2.4",
          "url": "http://www.apache.org/dist/httpd/CHANGES_2.4"
        },
        {
          "category": "external",
          "summary": "https://httpd.apache.org/security/vulnerabilities_24.html",
          "url": "https://httpd.apache.org/security/vulnerabilities_24.html"
        }
      ],
      "release_date": "2019-04-01T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2020-06-22T13:08:26+00:00",
          "details": "Before applying the update, back up your existing installation, including all applications, configuration files, databases and database settings, and so on.\n\nThe References section of this erratum contains a download link for the update. You must be logged in to download the update.",
          "product_ids": [
            "Red Hat JBoss Core Services 1"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2020:2646"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "LOW",
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.0"
          },
          "products": [
            "Red Hat JBoss Core Services 1"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Low"
        }
      ],
      "title": "httpd: mod_http2: read-after-free on a string compare"
    },
    {
      "cve": "CVE-2019-0197",
      "cwe": {
        "id": "CWE-444",
        "name": "Inconsistent Interpretation of HTTP Requests (\u0027HTTP Request/Response Smuggling\u0027)"
      },
      "discovery_date": "2019-04-02T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1695042"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A vulnerability was found in Apache HTTP Server 2.4.34 to 2.4.38. When HTTP/2 was enabled for a http: host or H2Upgrade was enabled for h2 on a https: host, an Upgrade request from http/1.1 to http/2 that was not the first request on a connection could lead to a misconfiguration and crash. Server that never enabled the h2 protocol or that only enabled it for https: and did not set \"H2Upgrade on\" are unaffected by this issue.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "httpd: mod_http2: possible crash on late upgrade",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "Red Hat JBoss Core Services 1"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-0197"
        },
        {
          "category": "external",
          "summary": "RHBZ#1695042",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1695042"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-0197",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-0197"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-0197",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-0197"
        },
        {
          "category": "external",
          "summary": "http://www.apache.org/dist/httpd/CHANGES_2.4",
          "url": "http://www.apache.org/dist/httpd/CHANGES_2.4"
        },
        {
          "category": "external",
          "summary": "https://httpd.apache.org/security/vulnerabilities_24.html",
          "url": "https://httpd.apache.org/security/vulnerabilities_24.html"
        }
      ],
      "release_date": "2019-02-01T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2020-06-22T13:08:26+00:00",
          "details": "Before applying the update, back up your existing installation, including all applications, configuration files, databases and database settings, and so on.\n\nThe References section of this erratum contains a download link for the update. You must be logged in to download the update.",
          "product_ids": [
            "Red Hat JBoss Core Services 1"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2020:2646"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "NETWORK",
            "availabilityImpact": "LOW",
            "baseScore": 4.2,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "LOW",
            "privilegesRequired": "LOW",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.0/AV:N/AC:H/PR:L/UI:N/S:U/C:N/I:L/A:L",
            "version": "3.0"
          },
          "products": [
            "Red Hat JBoss Core Services 1"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Low"
        }
      ],
      "title": "httpd: mod_http2: possible crash on late upgrade"
    },
    {
      "cve": "CVE-2019-15903",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "discovery_date": "2019-09-04T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1752592"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "In libexpat before 2.2.8, crafted XML input could fool the parser into changing from DTD parsing to document parsing too early; a consecutive call to XML_GetCurrentLineNumber (or XML_GetCurrentColumnNumber) then resulted in a heap-based buffer over-read.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "expat: heap-based buffer over-read via crafted XML input",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "Red Hat JBoss Core Services 1"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-15903"
        },
        {
          "category": "external",
          "summary": "RHBZ#1752592",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1752592"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-15903",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-15903"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-15903",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-15903"
        }
      ],
      "release_date": "2019-09-04T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2020-06-22T13:08:26+00:00",
          "details": "Before applying the update, back up your existing installation, including all applications, configuration files, databases and database settings, and so on.\n\nThe References section of this erratum contains a download link for the update. You must be logged in to download the update.",
          "product_ids": [
            "Red Hat JBoss Core Services 1"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2020:2646"
        },
        {
          "category": "workaround",
          "details": "Mitigation for this issue is either not available or the currently available options don\u0027t meet the Red Hat Product Security criteria comprising ease of use and deployment, applicability to widespread installation base or stability.",
          "product_ids": [
            "Red Hat JBoss Core Services 1"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.0"
          },
          "products": [
            "Red Hat JBoss Core Services 1"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Low"
        }
      ],
      "title": "expat: heap-based buffer over-read via crafted XML input"
    },
    {
      "cve": "CVE-2019-19956",
      "cwe": {
        "id": "CWE-772",
        "name": "Missing Release of Resource after Effective Lifetime"
      },
      "discovery_date": "2020-01-08T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1788856"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "xmlParseBalancedChunkMemoryRecover in parser.c in libxml2 before 2.9.10 has a memory leak related to newDoc-\u003eoldNs.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "libxml2: memory leak in xmlParseBalancedChunkMemoryRecover in parser.c",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "Red Hat JBoss Core Services 1"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-19956"
        },
        {
          "category": "external",
          "summary": "RHBZ#1788856",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1788856"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-19956",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-19956"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-19956",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-19956"
        }
      ],
      "release_date": "2020-01-08T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2020-06-22T13:08:26+00:00",
          "details": "Before applying the update, back up your existing installation, including all applications, configuration files, databases and database settings, and so on.\n\nThe References section of this erratum contains a download link for the update. You must be logged in to download the update.",
          "product_ids": [
            "Red Hat JBoss Core Services 1"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2020:2646"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "Red Hat JBoss Core Services 1"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "libxml2: memory leak in xmlParseBalancedChunkMemoryRecover in parser.c"
    },
    {
      "cve": "CVE-2019-20388",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "discovery_date": "2020-02-06T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1799734"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A memory leak was found in the xmlSchemaValidateStream function of libxml2. Applications that use this library may be vulnerable to memory not being freed leading to a denial of service. System availability is the highest threat from this vulnerability.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "libxml2: memory leak in xmlSchemaPreRun in xmlschemas.c",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "Red Hat JBoss Core Services 1"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-20388"
        },
        {
          "category": "external",
          "summary": "RHBZ#1799734",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1799734"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-20388",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-20388"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-20388",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-20388"
        }
      ],
      "release_date": "2020-01-21T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2020-06-22T13:08:26+00:00",
          "details": "Before applying the update, back up your existing installation, including all applications, configuration files, databases and database settings, and so on.\n\nThe References section of this erratum contains a download link for the update. You must be logged in to download the update.",
          "product_ids": [
            "Red Hat JBoss Core Services 1"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2020:2646"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "Red Hat JBoss Core Services 1"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "libxml2: memory leak in xmlSchemaPreRun in xmlschemas.c"
    },
    {
      "cve": "CVE-2020-1934",
      "cwe": {
        "id": "CWE-456",
        "name": "Missing Initialization of a Variable"
      },
      "discovery_date": "2020-04-01T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1820772"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A flaw was found in Apache\u0027s HTTP server (httpd) .The mod_proxy_ftp module may use uninitialized memory with proxying to a malicious FTP server. The highest threat from this vulnerability is to data confidentiality.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "httpd: mod_proxy_ftp use of uninitialized value",
          "title": "Vulnerability summary"
        },
        {
          "category": "other",
          "text": "This flaw is caused by use of an uninitialized memory variable. Practically this has no impact, but in some corner cases it is possible that the contents of this variable could be read by a remote process, causing loss of confidentiality as a result of this. There is no evidence of code execution.",
          "title": "Statement"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "Red Hat JBoss Core Services 1"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2020-1934"
        },
        {
          "category": "external",
          "summary": "RHBZ#1820772",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1820772"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2020-1934",
          "url": "https://www.cve.org/CVERecord?id=CVE-2020-1934"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2020-1934",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2020-1934"
        },
        {
          "category": "external",
          "summary": "https://httpd.apache.org/security/vulnerabilities_24.html",
          "url": "https://httpd.apache.org/security/vulnerabilities_24.html"
        }
      ],
      "release_date": "2020-04-01T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2020-06-22T13:08:26+00:00",
          "details": "Before applying the update, back up your existing installation, including all applications, configuration files, databases and database settings, and so on.\n\nThe References section of this erratum contains a download link for the update. You must be logged in to download the update.",
          "product_ids": [
            "Red Hat JBoss Core Services 1"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2020:2646"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "NETWORK",
            "availabilityImpact": "NONE",
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "confidentialityImpact": "LOW",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "Red Hat JBoss Core Services 1"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Low"
        }
      ],
      "title": "httpd: mod_proxy_ftp use of uninitialized value"
    },
    {
      "cve": "CVE-2020-7595",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "discovery_date": "2020-02-06T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1799786"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "xmlStringLenDecodeEntities in parser.c in libxml2 2.9.10 has an infinite loop in a certain end-of-file situation.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "libxml2: infinite loop in xmlStringLenDecodeEntities in some end-of-file situations",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "Red Hat JBoss Core Services 1"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2020-7595"
        },
        {
          "category": "external",
          "summary": "RHBZ#1799786",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1799786"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2020-7595",
          "url": "https://www.cve.org/CVERecord?id=CVE-2020-7595"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2020-7595",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2020-7595"
        }
      ],
      "release_date": "2020-01-21T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2020-06-22T13:08:26+00:00",
          "details": "Before applying the update, back up your existing installation, including all applications, configuration files, databases and database settings, and so on.\n\nThe References section of this erratum contains a download link for the update. You must be logged in to download the update.",
          "product_ids": [
            "Red Hat JBoss Core Services 1"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2020:2646"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "Red Hat JBoss Core Services 1"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "libxml2: infinite loop in xmlStringLenDecodeEntities in some end-of-file situations"
    },
    {
      "acknowledgments": [
        {
          "names": [
            "the Envoy security team"
          ]
        }
      ],
      "cve": "CVE-2020-11080",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "discovery_date": "2020-06-08T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1844929"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A resource consumption vulnerability was found in nghttp2. This flaw allows an attacker to repeatedly construct an overly large HTTP/2 SETTINGS frame with a length of 14,400 bytes that causes excessive CPU usage, leading to a denial of service.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "nghttp2: overly large SETTINGS frames can lead to DoS",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "Red Hat JBoss Core Services 1"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2020-11080"
        },
        {
          "category": "external",
          "summary": "RHBZ#1844929",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1844929"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2020-11080",
          "url": "https://www.cve.org/CVERecord?id=CVE-2020-11080"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2020-11080",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2020-11080"
        },
        {
          "category": "external",
          "summary": "https://github.com/nghttp2/nghttp2/security/advisories/GHSA-q5wr-xfw9-q7xr",
          "url": "https://github.com/nghttp2/nghttp2/security/advisories/GHSA-q5wr-xfw9-q7xr"
        }
      ],
      "release_date": "2020-06-02T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2020-06-22T13:08:26+00:00",
          "details": "Before applying the update, back up your existing installation, including all applications, configuration files, databases and database settings, and so on.\n\nThe References section of this erratum contains a download link for the update. You must be logged in to download the update.",
          "product_ids": [
            "Red Hat JBoss Core Services 1"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2020:2646"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "Red Hat JBoss Core Services 1"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Important"
        }
      ],
      "title": "nghttp2: overly large SETTINGS frames can lead to DoS"
    }
  ]
}

{
  "document": {
    "aggregate_severity": {
      "namespace": "https://access.redhat.com/security/updates/classification/",
      "text": "Low"
    },
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Copyright \u00a9 Red Hat, Inc. All rights reserved.",
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Updated openshift/odo-init-image container image is now available for Red Hat Openshift Do 1.0.",
        "title": "Topic"
      },
      {
        "category": "general",
        "text": "Red Hat OpenShift Do (odo) is a simple CLI tool for developers to create,\nbuild, and deploy applications on OpenShift. The odo tool is completely\nclient-based and requires no server within the OpenShift cluster for\ndeployment. It detects changes to local code and deploys it to the cluster\nautomatically, giving instant feedback to validate changes in real-time. It\nsupports multiple programming languages and frameworks.\n\nRed Hat OpenShift Do openshift/odo-init-image 1.1.3 is a container image\nthat is used as part of the InitContainer setup that provisions odo\ncomponents.\n\nThe advisory addresses the following issues:\n\n* Re-release of odo-init-image 1.1.3 for security updates",
        "title": "Details"
      },
      {
        "category": "legal_disclaimer",
        "text": "This content is licensed under the Creative Commons Attribution 4.0 International License (https://creativecommons.org/licenses/by/4.0/). If you distribute this content, or a modified version of it, you must provide attribution to Red Hat Inc. and provide a link to the original.",
        "title": "Terms of Use"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "https://access.redhat.com/security/team/contact/",
      "issuing_authority": "Red Hat Product Security is responsible for vulnerability handling across all Red Hat products and services.",
      "name": "Red Hat Product Security",
      "namespace": "https://www.redhat.com"
    },
    "references": [
      {
        "category": "self",
        "summary": "https://access.redhat.com/errata/RHSA-2021:0949",
        "url": "https://access.redhat.com/errata/RHSA-2021:0949"
      },
      {
        "category": "external",
        "summary": "https://access.redhat.com/security/updates/classification/#low",
        "url": "https://access.redhat.com/security/updates/classification/#low"
      },
      {
        "category": "external",
        "summary": "https://docs.openshift.com/container-platform/4.4/cli_reference/openshift_developer_cli/installing-odo.html",
        "url": "https://docs.openshift.com/container-platform/4.4/cli_reference/openshift_developer_cli/installing-odo.html"
      },
      {
        "category": "external",
        "summary": "1832983",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1832983"
      },
      {
        "category": "self",
        "summary": "Canonical URL",
        "url": "https://security.access.redhat.com/data/csaf/v2/advisories/2021/rhsa-2021_0949.json"
      }
    ],
    "title": "Red Hat Security Advisory: Red Hat OpenShift Do openshift/odo-init-image 1.1.3 security update",
    "tracking": {
      "current_release_date": "2024-11-05T23:23:54+00:00",
      "generator": {
        "date": "2024-11-05T23:23:54+00:00",
        "engine": {
          "name": "Red Hat SDEngine",
          "version": "4.1.1"
        }
      },
      "id": "RHSA-2021:0949",
      "initial_release_date": "2021-03-22T10:10:55+00:00",
      "revision_history": [
        {
          "date": "2021-03-22T10:10:55+00:00",
          "number": "1",
          "summary": "Initial version"
        },
        {
          "date": "2021-03-22T10:10:55+00:00",
          "number": "2",
          "summary": "Last updated version"
        },
        {
          "date": "2024-11-05T23:23:54+00:00",
          "number": "3",
          "summary": "Last generated version"
        }
      ],
      "status": "final",
      "version": "3"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_name",
                "name": "OpenShift Do 1",
                "product": {
                  "name": "OpenShift Do 1",
                  "product_id": "7Server-RHODO-1",
                  "product_identification_helper": {
                    "cpe": "cpe:/a:redhat:openshift_do:1.0::el7"
                  }
                }
              }
            ],
            "category": "product_family",
            "name": "OpenShift Do"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64",
                "product": {
                  "name": "openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64",
                  "product_id": "openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64",
                  "product_identification_helper": {
                    "purl": "pkg:oci/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96?arch=amd64\u0026repository_url=registry.redhat.io/openshiftdo/odo-init-image-rhel7\u0026tag=1.1.3-2"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "amd64"
          }
        ],
        "category": "vendor",
        "name": "Red Hat"
      }
    ],
    "relationships": [
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64 as a component of OpenShift Do 1",
          "product_id": "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
        },
        "product_reference": "openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64",
        "relates_to_product_reference": "7Server-RHODO-1"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2018-20843",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "discovery_date": "2019-06-24T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1723723"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "It was discovered that the \"setElementTypePrefix()\" function incorrectly extracted XML namespace prefixes. By tricking an application into processing a specially crafted XML file, an attacker could cause unusually high consumption of memory resources and possibly lead to a denial of service.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "expat: large number of colons in input makes parser consume high amount of resources, leading to DoS",
          "title": "Vulnerability summary"
        },
        {
          "category": "other",
          "text": "When processing a specially crafted XML file, expat may use more memory than ultimately necessary, which can also lead to increased CPU usage and longer processing times. Depending on available system resources and configuration, this may also lead to the application triggering the Out-Of-Memory-Killer, causing the application to be terminated.",
          "title": "Statement"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2018-20843"
        },
        {
          "category": "external",
          "summary": "RHBZ#1723723",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1723723"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2018-20843",
          "url": "https://www.cve.org/CVERecord?id=CVE-2018-20843"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2018-20843",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2018-20843"
        },
        {
          "category": "external",
          "summary": "https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=931031",
          "url": "https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=931031"
        }
      ],
      "release_date": "2019-06-24T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-03-22T10:10:55+00:00",
          "details": "Download and install a new CLI binary by following the instructions linked from the References section.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:0949"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "expat: large number of colons in input makes parser consume high amount of resources, leading to DoS"
    },
    {
      "cve": "CVE-2019-5094",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "discovery_date": "2019-11-04T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1768555"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "An exploitable code execution vulnerability exists in the quota file functionality of E2fsprogs 1.45.3. A specially crafted ext4 partition can cause an out-of-bounds write on the heap, resulting in code execution. An attacker can corrupt a partition to trigger this vulnerability.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "e2fsprogs: Crafted ext4 partition leads to out-of-bounds write",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-5094"
        },
        {
          "category": "external",
          "summary": "RHBZ#1768555",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1768555"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-5094",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-5094"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-5094",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-5094"
        },
        {
          "category": "external",
          "summary": "https://talosintelligence.com/vulnerability_reports/TALOS-2019-0887",
          "url": "https://talosintelligence.com/vulnerability_reports/TALOS-2019-0887"
        }
      ],
      "release_date": "2019-08-27T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-03-22T10:10:55+00:00",
          "details": "Download and install a new CLI binary by following the instructions linked from the References section.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:0949"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "LOCAL",
            "availabilityImpact": "HIGH",
            "baseScore": 6.4,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "HIGH",
            "integrityImpact": "HIGH",
            "privilegesRequired": "HIGH",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.0/AV:L/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.0"
          },
          "products": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "e2fsprogs: Crafted ext4 partition leads to out-of-bounds write"
    },
    {
      "cve": "CVE-2019-5188",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "discovery_date": "2020-01-07T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1790048"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A code execution vulnerability exists in the directory rehashing functionality of E2fsprogs e2fsck 1.45.4. A specially crafted ext4 directory can cause an out-of-bounds write on the stack, resulting in code execution. An attacker can corrupt a partition to trigger this vulnerability.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "e2fsprogs: Out-of-bounds write in e2fsck/rehash.c",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-5188"
        },
        {
          "category": "external",
          "summary": "RHBZ#1790048",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1790048"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-5188",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-5188"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-5188",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-5188"
        }
      ],
      "release_date": "2020-01-07T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-03-22T10:10:55+00:00",
          "details": "Download and install a new CLI binary by following the instructions linked from the References section.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:0949"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "LOCAL",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "HIGH",
            "integrityImpact": "HIGH",
            "privilegesRequired": "HIGH",
            "scope": "CHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "e2fsprogs: Out-of-bounds write in e2fsck/rehash.c"
    },
    {
      "acknowledgments": [
        {
          "names": [
            "the Curl project"
          ]
        },
        {
          "names": [
            "Thomas Vegas"
          ],
          "summary": "Acknowledged by upstream."
        }
      ],
      "cve": "CVE-2019-5482",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "discovery_date": "2019-09-05T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1749652"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "Heap buffer overflow in the TFTP protocol handler in cURL 7.19.4 to 7.65.3.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "curl: heap buffer overflow in function tftp_receive_packet()",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-5482"
        },
        {
          "category": "external",
          "summary": "RHBZ#1749652",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1749652"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-5482",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-5482"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-5482",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-5482"
        },
        {
          "category": "external",
          "summary": "https://curl.haxx.se/docs/CVE-2019-5482.html",
          "url": "https://curl.haxx.se/docs/CVE-2019-5482.html"
        }
      ],
      "release_date": "2019-09-11T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-03-22T10:10:55+00:00",
          "details": "Download and install a new CLI binary by following the instructions linked from the References section.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:0949"
        },
        {
          "category": "workaround",
          "details": "Do not use TFTP with curl with smaller than the default BLKSIZE.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "ADJACENT_NETWORK",
            "availabilityImpact": "LOW",
            "baseScore": 6.3,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "LOW",
            "integrityImpact": "LOW",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.0/AV:A/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.0"
          },
          "products": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "curl: heap buffer overflow in function tftp_receive_packet()"
    },
    {
      "acknowledgments": [
        {
          "names": [
            "the Mozilla project"
          ]
        },
        {
          "names": [
            "Henry Corrigan-Gibbs"
          ],
          "summary": "Acknowledged by upstream."
        }
      ],
      "cve": "CVE-2019-11719",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "discovery_date": "2019-07-10T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1728436"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "When importing a curve25519 private key in PKCS#8format with leading 0x00 bytes, it is possible to trigger an out-of-bounds read in the Network Security Services (NSS) library. This could lead to information disclosure. This vulnerability affects Firefox ESR \u003c 60.8, Firefox \u003c 68, and Thunderbird \u003c 60.8.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "nss: Out-of-bounds read when importing curve25519 private key",
          "title": "Vulnerability summary"
        },
        {
          "category": "other",
          "text": "Firefox on Red Hat Enterprise Linux is built against the system nss library.",
          "title": "Statement"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-11719"
        },
        {
          "category": "external",
          "summary": "RHBZ#1728436",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1728436"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-11719",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-11719"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-11719",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-11719"
        },
        {
          "category": "external",
          "summary": "https://www.mozilla.org/en-US/security/advisories/mfsa2019-22/#CVE-2019-11719",
          "url": "https://www.mozilla.org/en-US/security/advisories/mfsa2019-22/#CVE-2019-11719"
        }
      ],
      "release_date": "2019-07-10T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-03-22T10:10:55+00:00",
          "details": "Download and install a new CLI binary by following the instructions linked from the References section.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:0949"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "NONE",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "HIGH",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.0"
          },
          "products": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "nss: Out-of-bounds read when importing curve25519 private key"
    },
    {
      "acknowledgments": [
        {
          "names": [
            "the Mozilla project"
          ]
        },
        {
          "names": [
            "Hubert Kario"
          ],
          "summary": "Acknowledged by upstream."
        }
      ],
      "cve": "CVE-2019-11727",
      "cwe": {
        "id": "CWE-327",
        "name": "Use of a Broken or Risky Cryptographic Algorithm"
      },
      "discovery_date": "2019-07-09T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1730988"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A vulnerability exists where it possible to force Network Security Services (NSS) to sign CertificateVerify with PKCS#1 v1.5 signatures when those are the only ones advertised by server in CertificateRequest in TLS 1.3. PKCS#1 v1.5 signatures should not be used for TLS 1.3 messages. This vulnerability affects Firefox \u003c 68.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "nss: PKCS#1 v1.5 signatures can be used for TLS 1.3",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-11727"
        },
        {
          "category": "external",
          "summary": "RHBZ#1730988",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1730988"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-11727",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-11727"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-11727",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-11727"
        },
        {
          "category": "external",
          "summary": "https://www.mozilla.org/en-US/security/advisories/mfsa2019-21/#CVE-2019-11727",
          "url": "https://www.mozilla.org/en-US/security/advisories/mfsa2019-21/#CVE-2019-11727"
        }
      ],
      "release_date": "2019-07-09T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-03-22T10:10:55+00:00",
          "details": "Download and install a new CLI binary by following the instructions linked from the References section.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:0949"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "NETWORK",
            "availabilityImpact": "NONE",
            "baseScore": 3.4,
            "baseSeverity": "LOW",
            "confidentialityImpact": "LOW",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "CHANGED",
            "userInteraction": "REQUIRED",
            "vectorString": "CVSS:3.0/AV:N/AC:H/PR:N/UI:R/S:C/C:L/I:N/A:N",
            "version": "3.0"
          },
          "products": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Low"
        }
      ],
      "title": "nss: PKCS#1 v1.5 signatures can be used for TLS 1.3"
    },
    {
      "acknowledgments": [
        {
          "names": [
            "the Mozilla project"
          ]
        }
      ],
      "cve": "CVE-2019-11756",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "discovery_date": "2019-11-21T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1774835"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A use-after-free flaw was found in Mozilla Network Security Services (NSS) related to PK11 session handling. An attacker could use this flaw to execute arbitrary code with the permissions of the user running the application compiled with NSS.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "nss: Use-after-free in sftk_FreeSession due to improper refcounting",
          "title": "Vulnerability summary"
        },
        {
          "category": "other",
          "text": "This flaw was fixed in upstream nss-3.47. Exploitation of this flaw is difficult and even impossible in most cases.",
          "title": "Statement"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-11756"
        },
        {
          "category": "external",
          "summary": "RHBZ#1774835",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1774835"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-11756",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-11756"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-11756",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-11756"
        },
        {
          "category": "external",
          "summary": "https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/NSS_3.47_release_notes",
          "url": "https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/NSS_3.47_release_notes"
        }
      ],
      "release_date": "2019-12-10T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-03-22T10:10:55+00:00",
          "details": "Download and install a new CLI binary by following the instructions linked from the References section.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:0949"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "HIGH",
            "integrityImpact": "HIGH",
            "privilegesRequired": "LOW",
            "scope": "UNCHANGED",
            "userInteraction": "REQUIRED",
            "vectorString": "CVSS:3.0/AV:N/AC:H/PR:L/UI:R/S:U/C:H/I:H/A:H",
            "version": "3.0"
          },
          "products": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "nss: Use-after-free in sftk_FreeSession due to improper refcounting"
    },
    {
      "cve": "CVE-2019-12450",
      "cwe": {
        "id": "CWE-552",
        "name": "Files or Directories Accessible to External Parties"
      },
      "discovery_date": "2019-06-10T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1719141"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "file_copy_fallback in gio/gfile.c in GNOME GLib 2.15.0 through 2.61.1 does not properly restrict file permissions while a copy operation is in progress. Instead, default permissions are used.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "glib2: file_copy_fallback in gio/gfile.c in GNOME GLib does not properly restrict file permissions while a copy operation is in progress",
          "title": "Vulnerability summary"
        },
        {
          "category": "other",
          "text": "This issue affects the versions of glib2 as shipped with Red Hat Enterprise Linux 6, 7 and 8 . Red Hat Product Security has rated this issue as having a security impact of Moderate.\n\nRed Hat Enterprise Linux 6 is now in Maintenance Support 2 Phase of the support and maintenance life cycle. This has been rated as having a security impact of Important, and is not currently planned to be addressed in future updates. For additional information, refer to the Red Hat Enterprise Linux Life Cycle: https://access.redhat.com/support/policy/updates/errata/.",
          "title": "Statement"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-12450"
        },
        {
          "category": "external",
          "summary": "RHBZ#1719141",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1719141"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-12450",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-12450"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-12450",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-12450"
        }
      ],
      "release_date": "2019-05-23T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-03-22T10:10:55+00:00",
          "details": "Download and install a new CLI binary by following the instructions linked from the References section.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:0949"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "LOCAL",
            "availabilityImpact": "NONE",
            "baseScore": 6.6,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "HIGH",
            "integrityImpact": "HIGH",
            "privilegesRequired": "LOW",
            "scope": "UNCHANGED",
            "userInteraction": "REQUIRED",
            "vectorString": "CVSS:3.0/AV:L/AC:L/PR:L/UI:R/S:U/C:H/I:H/A:N",
            "version": "3.0"
          },
          "products": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "glib2: file_copy_fallback in gio/gfile.c in GNOME GLib does not properly restrict file permissions while a copy operation is in progress"
    },
    {
      "acknowledgments": [
        {
          "names": [
            "the D-Bus project"
          ]
        },
        {
          "names": [
            "Joe Vennix"
          ],
          "organization": "Apple Information Security",
          "summary": "Acknowledged by upstream."
        }
      ],
      "cve": "CVE-2019-12749",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "discovery_date": "2019-06-09T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1719344"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A flaw was found in dbus. The implementation of DBUS_COOKIE_SHA1 is susceptible to a symbolic link attack. A malicious client with write access to its own home directory could manipulate a ~/.dbus-keyrings symlink to cause the DBusServer to read and write in unintended locations resulting in an authentication bypass. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "dbus: DBusServer DBUS_COOKIE_SHA1 authentication bypass",
          "title": "Vulnerability summary"
        },
        {
          "category": "other",
          "text": "This flaw is mitigated by the fact that by default, the well-known system dbus-daemon (since 2003) and the well-known session dbus-daemon (in stable releases since dbus 1.10.0 in 2015) only accept the EXTERNAL authentication mechanism, and as a result will reject DBUS_COOKIE_SHA1 at an early stage, before manipulating cookies. \n\nRed Hat Enterprise Linux 6 is affected by this flaw, which can be leveraged to achieve privilege escalation via upstart.  This issue has been rated as having important impact for Red Hat Enterprise Linux 6.\n\nRed Hat Enterprise Linux 7 and 8, both ship dbus \u003e= 1.10 and therefore are affected by this flaw only when system or session dbus-daemons are used under non-standard configurations or by third party users of DBusServer.  Red Hat Enterprise Linux 7 and 8 does not ship any affected DBusServer cosumer. However third party applications may be affected.",
          "title": "Statement"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-12749"
        },
        {
          "category": "external",
          "summary": "RHBZ#1719344",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1719344"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-12749",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-12749"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-12749",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-12749"
        },
        {
          "category": "external",
          "summary": "https://www.openwall.com/lists/oss-security/2019/06/11/2",
          "url": "https://www.openwall.com/lists/oss-security/2019/06/11/2"
        }
      ],
      "release_date": "2019-06-11T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-03-22T10:10:55+00:00",
          "details": "Download and install a new CLI binary by following the instructions linked from the References section.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:0949"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "LOCAL",
            "availabilityImpact": "HIGH",
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "HIGH",
            "integrityImpact": "HIGH",
            "privilegesRequired": "LOW",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.0"
          },
          "products": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Important"
        }
      ],
      "title": "dbus: DBusServer DBUS_COOKIE_SHA1 authentication bypass"
    },
    {
      "acknowledgments": [
        {
          "names": [
            "Simon McVittie"
          ],
          "organization": "Collabora Ltd."
        }
      ],
      "cve": "CVE-2019-14822",
      "cwe": {
        "id": "CWE-862",
        "name": "Missing Authorization"
      },
      "discovery_date": "2019-06-05T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1717958"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A flaw was discovered in ibus that allows any unprivileged user to monitor and send method calls to the ibus bus of another user due to a misconfiguration in the DBus server setup. A local attacker may use this flaw to intercept all keystrokes of a victim user who is using the graphical interface, change the input method engine, or modify other input related configurations of the victim user.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "ibus: missing authorization allows local attacker to access the input bus of another user",
          "title": "Vulnerability summary"
        },
        {
          "category": "other",
          "text": "Gnome uses the ibus input framework only when the user explicitly configures it or when some input method sources are in use, like Korean from the ibus-hangul package or Chinese input methods from the ibus-libpinyin. Input methods like en-US are not handled by ibus, thus if the victim user just use them the attacker will not be able to intercept the key strokes of that user.",
          "title": "Statement"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-14822"
        },
        {
          "category": "external",
          "summary": "RHBZ#1717958",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1717958"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-14822",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-14822"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-14822",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-14822"
        }
      ],
      "release_date": "2019-09-13T07:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-03-22T10:10:55+00:00",
          "details": "Download and install a new CLI binary by following the instructions linked from the References section.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:0949"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "LOCAL",
            "availabilityImpact": "NONE",
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "HIGH",
            "integrityImpact": "LOW",
            "privilegesRequired": "LOW",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:L/A:N",
            "version": "3.0"
          },
          "products": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "ibus: missing authorization allows local attacker to access the input bus of another user"
    },
    {
      "acknowledgments": [
        {
          "names": [
            "Thomas Habets"
          ]
        }
      ],
      "cve": "CVE-2019-14866",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "discovery_date": "2019-10-25T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1765511"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "It was discovered cpio does not properly validate input files when generating TAR archives. When cpio is used to create TAR archives from paths an attacker can write to, the resulting archive may contain files with permissions the attacker did not have or in paths he did not have access to. Extracting those archives from a high-privilege user without carefully reviewing them may lead to the compromise of the system.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "cpio: improper input validation when writing tar header fields leads to unexpected tar generation",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-14866"
        },
        {
          "category": "external",
          "summary": "RHBZ#1765511",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1765511"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-14866",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-14866"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-14866",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-14866"
        }
      ],
      "release_date": "2019-08-30T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-03-22T10:10:55+00:00",
          "details": "Download and install a new CLI binary by following the instructions linked from the References section.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:0949"
        },
        {
          "category": "workaround",
          "details": "TAR archives should be inspected before being extracted and the extraction should be performed with the `tar` command or `--no-absolute-filenames` option if done with `cpio`. Moreover, it should be performed by a low-privilege user whenever possible, to prevent extraction of files that could compromise the system.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "LOCAL",
            "availabilityImpact": "HIGH",
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "HIGH",
            "integrityImpact": "HIGH",
            "privilegesRequired": "LOW",
            "scope": "UNCHANGED",
            "userInteraction": "REQUIRED",
            "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:R/S:U/C:H/I:H/A:H",
            "version": "3.0"
          },
          "products": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "cpio: improper input validation when writing tar header fields leads to unexpected tar generation"
    },
    {
      "cve": "CVE-2019-15903",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "discovery_date": "2019-09-04T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1752592"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "In libexpat before 2.2.8, crafted XML input could fool the parser into changing from DTD parsing to document parsing too early; a consecutive call to XML_GetCurrentLineNumber (or XML_GetCurrentColumnNumber) then resulted in a heap-based buffer over-read.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "expat: heap-based buffer over-read via crafted XML input",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-15903"
        },
        {
          "category": "external",
          "summary": "RHBZ#1752592",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1752592"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-15903",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-15903"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-15903",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-15903"
        }
      ],
      "release_date": "2019-09-04T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-03-22T10:10:55+00:00",
          "details": "Download and install a new CLI binary by following the instructions linked from the References section.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:0949"
        },
        {
          "category": "workaround",
          "details": "Mitigation for this issue is either not available or the currently available options don\u0027t meet the Red Hat Product Security criteria comprising ease of use and deployment, applicability to widespread installation base or stability.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.0"
          },
          "products": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Low"
        }
      ],
      "title": "expat: heap-based buffer over-read via crafted XML input"
    },
    {
      "cve": "CVE-2019-16935",
      "cwe": {
        "id": "CWE-79",
        "name": "Improper Neutralization of Input During Web Page Generation (\u0027Cross-site Scripting\u0027)"
      },
      "discovery_date": "2019-09-27T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1763229"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A reflected cross-site scripting (XSS) vulnerability was found in Python XML-RPC server. The `server_title` field is not sufficiently sanitized allowing malicious JavaScript to be injected. Successful exploitation would allow a remote attacker to execute JavaScript code within the context of the affected user.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "python: XSS vulnerability in the documentation XML-RPC server in server_title field",
          "title": "Vulnerability summary"
        },
        {
          "category": "other",
          "text": "This flaw does not affect the versions of python27-python as shipped with Red Hat Software Collections 3 as they already include the fix.\nThis flaw does not affect the versions of python36:3.6/python36 as shipped with Red Hat Enterprise Linux 8 as they are \"symlinks\" to the main python3 component, which provides the actual interpreter of the Python programming language.",
          "title": "Statement"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-16935"
        },
        {
          "category": "external",
          "summary": "RHBZ#1763229",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1763229"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-16935",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-16935"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-16935",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-16935"
        }
      ],
      "release_date": "2019-09-21T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-03-22T10:10:55+00:00",
          "details": "Download and install a new CLI binary by following the instructions linked from the References section.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:0949"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "NONE",
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "LOW",
            "integrityImpact": "LOW",
            "privilegesRequired": "NONE",
            "scope": "CHANGED",
            "userInteraction": "REQUIRED",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "python: XSS vulnerability in the documentation XML-RPC server in server_title field"
    },
    {
      "acknowledgments": [
        {
          "names": [
            "the Mozilla Project"
          ]
        }
      ],
      "cve": "CVE-2019-17006",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "discovery_date": "2019-11-23T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1775916"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A vulnerability was discovered in nss where input text length was not checked when using certain cryptographic primitives. This could lead to a heap-buffer overflow resulting in a crash and data leak. The highest threat is to confidentiality and integrity of data as well as system availability.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "nss: Check length of inputs for cryptographic primitives",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-17006"
        },
        {
          "category": "external",
          "summary": "RHBZ#1775916",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1775916"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-17006",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-17006"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-17006",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-17006"
        },
        {
          "category": "external",
          "summary": "https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/NSS_3.46_release_notes",
          "url": "https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/NSS_3.46_release_notes"
        }
      ],
      "release_date": "2019-12-26T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-03-22T10:10:55+00:00",
          "details": "Download and install a new CLI binary by following the instructions linked from the References section.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:0949"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "HIGH",
            "integrityImpact": "HIGH",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.0"
          },
          "products": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "nss: Check length of inputs for cryptographic primitives"
    },
    {
      "cve": "CVE-2019-17023",
      "discovery_date": "2020-01-15T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1791225"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A protocol downgrade flaw was found in Network Security Services (NSS). After a HelloRetryRequest has been sent, the client may negotiate a lower protocol than TLS 1.3, resulting in an invalid state transition in the TLS State Machine. If the client gets into this state, incoming Application Data records will be ignored.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "nss: TLS 1.3 HelloRetryRequest downgrade request sets client into invalid state",
          "title": "Vulnerability summary"
        },
        {
          "category": "other",
          "text": "This flaw causes the client to hang when there is a downgrade attempt. Therefore no actual protocol downgrade occurs.",
          "title": "Statement"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-17023"
        },
        {
          "category": "external",
          "summary": "RHBZ#1791225",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1791225"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-17023",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-17023"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-17023",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-17023"
        },
        {
          "category": "external",
          "summary": "https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/NSS_3.49_release_notes",
          "url": "https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/NSS_3.49_release_notes"
        }
      ],
      "release_date": "2020-01-08T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-03-22T10:10:55+00:00",
          "details": "Download and install a new CLI binary by following the instructions linked from the References section.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:0949"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "NETWORK",
            "availabilityImpact": "NONE",
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "HIGH",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "REQUIRED",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:N/I:H/A:N",
            "version": "3.1"
          },
          "products": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Low"
        }
      ],
      "title": "nss: TLS 1.3 HelloRetryRequest downgrade request sets client into invalid state"
    },
    {
      "cve": "CVE-2019-17498",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "discovery_date": "2019-10-22T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1766898"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "In libssh2 v1.9.0 and earlier versions, the SSH_MSG_DISCONNECT logic in packet.c has an integer overflow in a bounds check, enabling an attacker to specify an arbitrary (out-of-bounds) offset for a subsequent memory read. A crafted SSH server may be able to disclose sensitive information or cause a denial of service condition on the client system when a user connects to the server.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "libssh2: integer overflow in SSH_MSG_DISCONNECT logic in packet.c",
          "title": "Vulnerability summary"
        },
        {
          "category": "other",
          "text": "This flaw needs a malicious MITM SSH server. When an application compiled with libssh2 connects to such a MITM SSH server, the server can trigger an integer overflow leading to an OOB read in the SSH_MSG_DISCONNECT logic. This can cause the application compiled with libssh2 to crash. This is strictly a client side crash and the SSH server may not be affected.\n\nAlso note that when a user connects to a malicious MITM server there is already a  risk of disclosing password/keys irrespective of the flaw.",
          "title": "Statement"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-17498"
        },
        {
          "category": "external",
          "summary": "RHBZ#1766898",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1766898"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-17498",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-17498"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-17498",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-17498"
        },
        {
          "category": "external",
          "summary": "https://blog.semmle.com/libssh2-integer-overflow-CVE-2019-17498/",
          "url": "https://blog.semmle.com/libssh2-integer-overflow-CVE-2019-17498/"
        }
      ],
      "release_date": "2019-10-16T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-03-22T10:10:55+00:00",
          "details": "Download and install a new CLI binary by following the instructions linked from the References section.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:0949"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "NONE",
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "HIGH",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "REQUIRED",
            "vectorString": "CVSS:3.0/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N",
            "version": "3.0"
          },
          "products": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "libssh2: integer overflow in SSH_MSG_DISCONNECT logic in packet.c"
    },
    {
      "cve": "CVE-2019-19126",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "discovery_date": "2019-11-20T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1774681"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A vulnerability was discovered in glibc where the LD_PREFER_MAP_32BIT_EXEC environment variable is not ignored when running binaries with the setuid flag on x86_64 architectures. This allows an attacker to force system to utilize only half of the memory (making the system think the software is 32-bit only), thus lowering the amount of memory being used with address space layout randomization (ASLR). The highest threat is confidentiality although the complexity of attack is high. The affected application must already have other vulnerabilities for this flaw to be usable.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "glibc: LD_PREFER_MAP_32BIT_EXEC not ignored in setuid binaries",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-19126"
        },
        {
          "category": "external",
          "summary": "RHBZ#1774681",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1774681"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-19126",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-19126"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-19126",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-19126"
        }
      ],
      "release_date": "2019-11-19T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-03-22T10:10:55+00:00",
          "details": "Download and install a new CLI binary by following the instructions linked from the References section.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:0949"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "LOCAL",
            "availabilityImpact": "NONE",
            "baseScore": 2.9,
            "baseSeverity": "LOW",
            "confidentialityImpact": "LOW",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.0/AV:L/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N",
            "version": "3.0"
          },
          "products": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Low"
        }
      ],
      "title": "glibc: LD_PREFER_MAP_32BIT_EXEC not ignored in setuid binaries"
    },
    {
      "cve": "CVE-2019-19956",
      "cwe": {
        "id": "CWE-772",
        "name": "Missing Release of Resource after Effective Lifetime"
      },
      "discovery_date": "2020-01-08T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1788856"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "xmlParseBalancedChunkMemoryRecover in parser.c in libxml2 before 2.9.10 has a memory leak related to newDoc-\u003eoldNs.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "libxml2: memory leak in xmlParseBalancedChunkMemoryRecover in parser.c",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-19956"
        },
        {
          "category": "external",
          "summary": "RHBZ#1788856",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1788856"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-19956",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-19956"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-19956",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-19956"
        }
      ],
      "release_date": "2020-01-08T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-03-22T10:10:55+00:00",
          "details": "Download and install a new CLI binary by following the instructions linked from the References section.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:0949"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "libxml2: memory leak in xmlParseBalancedChunkMemoryRecover in parser.c"
    },
    {
      "cve": "CVE-2019-20386",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "discovery_date": "2020-01-22T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1793979"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A memory leak was discovered in the systemd-login when a power-switch event is received. A physical attacker may trigger one of these events and leak bytes due to a missing free.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "systemd: memory leak in button_open() in login/logind-button.c when udev events are received",
          "title": "Vulnerability summary"
        },
        {
          "category": "other",
          "text": "The version of systemd delivered in OpenShift Container Platform 4.1 and included in CoreOS images has been superseded by the version delivered in Red Hat Enterprise Linux 8. CoreOS updates for systemd in will be consumed from Red Hat Enterprise Linux 8 channels.",
          "title": "Statement"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-20386"
        },
        {
          "category": "external",
          "summary": "RHBZ#1793979",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1793979"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-20386",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-20386"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-20386",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-20386"
        }
      ],
      "release_date": "2020-01-22T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-03-22T10:10:55+00:00",
          "details": "Download and install a new CLI binary by following the instructions linked from the References section.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:0949"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "PHYSICAL",
            "availabilityImpact": "LOW",
            "baseScore": 2.4,
            "baseSeverity": "LOW",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Low"
        }
      ],
      "title": "systemd: memory leak in button_open() in login/logind-button.c when udev events are received"
    },
    {
      "cve": "CVE-2019-20388",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "discovery_date": "2020-02-06T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1799734"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A memory leak was found in the xmlSchemaValidateStream function of libxml2. Applications that use this library may be vulnerable to memory not being freed leading to a denial of service. System availability is the highest threat from this vulnerability.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "libxml2: memory leak in xmlSchemaPreRun in xmlschemas.c",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-20388"
        },
        {
          "category": "external",
          "summary": "RHBZ#1799734",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1799734"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-20388",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-20388"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-20388",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-20388"
        }
      ],
      "release_date": "2020-01-21T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-03-22T10:10:55+00:00",
          "details": "Download and install a new CLI binary by following the instructions linked from the References section.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:0949"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "libxml2: memory leak in xmlSchemaPreRun in xmlschemas.c"
    },
    {
      "cve": "CVE-2019-20907",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "discovery_date": "2020-07-13T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1856481"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A flaw was found in python. In Lib/tarfile.py an attacker is able to craft a TAR archive leading to an infinite loop when opened by tarfile.open, because _proc_pax lacks header validation.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "python: infinite loop in the tarfile module via crafted TAR archive",
          "title": "Vulnerability summary"
        },
        {
          "category": "other",
          "text": "A service is vulnerable if it uses python\u0027s tarfile module to open untrusted tar files. If an attacker is able to submit a crafted tar file to a service which uses the tarfile module to open it, an infinite loop will be executed, potentially causing a denial of service. The tarfile module is included with python.\n\nVersions of `python36:3.6/python36` as shipped with Red Hat Enterprise Linux 8 are marked as \u0027Not affected\u0027 as they just provide \"symlinks\" to the main `python3` component, which provides the actual interpreter of the Python programming language.",
          "title": "Statement"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-20907"
        },
        {
          "category": "external",
          "summary": "RHBZ#1856481",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1856481"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-20907",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-20907"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-20907",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-20907"
        }
      ],
      "release_date": "2019-12-10T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-03-22T10:10:55+00:00",
          "details": "Download and install a new CLI binary by following the instructions linked from the References section.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:0949"
        },
        {
          "category": "workaround",
          "details": "This flaw can be mitigated by not opening untrusted files with tarfile.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "python: infinite loop in the tarfile module via crafted TAR archive"
    },
    {
      "cve": "CVE-2019-25013",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "discovery_date": "2021-01-04T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1912960"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A flaw was found in glibc. When processing input in the EUC-KR encoding, an invalid input sequence could cause glibc to read beyond the end of a buffer, resulting in a segmentation fault. The highest threat from this vulnerability is to system availability.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "glibc: buffer over-read in iconv when processing invalid multi-byte input sequences in the EUC-KR encoding",
          "title": "Vulnerability summary"
        },
        {
          "category": "other",
          "text": "This flaw has been rated as having moderate impact for glibc packages shipped with Red Hat Enterprise Linux because, the maximum impact of this vulnerability is a crash, and it relies on processing untrusted input in an uncommon encoding (EUC-KR).  When this encoding is not used, the vulnerability can not be triggered.",
          "title": "Statement"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-25013"
        },
        {
          "category": "external",
          "summary": "RHBZ#1912960",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1912960"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-25013",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-25013"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-25013",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-25013"
        }
      ],
      "release_date": "2019-09-06T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-03-22T10:10:55+00:00",
          "details": "Download and install a new CLI binary by following the instructions linked from the References section.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:0949"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 4.8,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "LOW",
            "scope": "UNCHANGED",
            "userInteraction": "REQUIRED",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:R/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "glibc: buffer over-read in iconv when processing invalid multi-byte input sequences in the EUC-KR encoding"
    },
    {
      "acknowledgments": [
        {
          "names": [
            "the OpenSSL project"
          ]
        },
        {
          "names": [
            "David Benjamin"
          ],
          "organization": "Google",
          "summary": "Acknowledged by upstream."
        }
      ],
      "cve": "CVE-2020-1971",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "discovery_date": "2020-12-02T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1903409"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A null pointer dereference flaw was found in openssl. A remote attacker, able to control the arguments of the GENERAL_NAME_cmp function, could cause the application, compiled with openssl to crash resulting in a denial of service. The highest threat from this vulnerability is to system availability.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "openssl: EDIPARTYNAME NULL pointer de-reference",
          "title": "Vulnerability summary"
        },
        {
          "category": "other",
          "text": "This is a flaw in the GENERAL_NAME_cmp function of openssl which can be triggered when both its arguments are of the same type i.e. EDIPARTYNAME. \n\n1. Red Hat does not ship any applications compiled with openssl, which used the above function in a vulnerable way.\n\n2. OpenSSL itself uses the GENERAL_NAME_cmp function for two purposes, when comparing CRL distribution point names between an available CRL and a CRL distribution point embedded in an X509 certificate and when verifying that a timestamp response token signer matches the timestamp authority name (exposed via the API functions TS_RESP_verify_response and TS_RESP_verify_token). If an attacker can control both items being compared then that attacker could trigger a crash. For example, if the attacker can trick a client or server into checking a malicious certificate against a malicious CRL then a crash may be triggered.\n\nThird party applications compiled with openssl using the function GENERAL_NAME_cmp in a vulnerable way are affected by this flaw.\n\nGENERAL_NAME_cmp was added in 0.9.8k, therefore older versions of openssl are not affected by this flaw.",
          "title": "Statement"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2020-1971"
        },
        {
          "category": "external",
          "summary": "RHBZ#1903409",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1903409"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2020-1971",
          "url": "https://www.cve.org/CVERecord?id=CVE-2020-1971"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2020-1971",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2020-1971"
        },
        {
          "category": "external",
          "summary": "https://www.openssl.org/news/secadv/20201208.txt",
          "url": "https://www.openssl.org/news/secadv/20201208.txt"
        }
      ],
      "release_date": "2020-12-08T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-03-22T10:10:55+00:00",
          "details": "Download and install a new CLI binary by following the instructions linked from the References section.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:0949"
        },
        {
          "category": "workaround",
          "details": "Applications not using the GENERAL_NAME_cmp of openssl are not vulnerable to this flaw. Even when this function is used, if the attacker can control both the arguments of this function, only then the attacker could trigger a crash.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Important"
        }
      ],
      "title": "openssl: EDIPARTYNAME NULL pointer de-reference"
    },
    {
      "acknowledgments": [
        {
          "names": [
            "the Mozilla Project"
          ]
        },
        {
          "names": [
            "Cesar Pereida",
            "Nicola Tuveri",
            "Yuval Yarom",
            "Billy Bob Brumley"
          ],
          "organization": "Network and Information Security Group (NISEC",
          "summary": "Acknowledged by upstream."
        }
      ],
      "cve": "CVE-2020-6829",
      "cwe": {
        "id": "CWE-327",
        "name": "Use of a Broken or Risky Cryptographic Algorithm"
      },
      "discovery_date": "2020-04-20T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1826187"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A flaw was found in nss. Using the EM side-channel, it is possible to extract the position of zero and non-zero wNAF digits while nss-certutil tool performs scalar multiplication during the ECDSA signature generation, leaking partial information about the ECDSA nonce. Given a small number of ECDSA signatures, this information can be used to steal the private key. The highest threat from this vulnerability is to data confidentiality.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "nss: Side channel attack on ECDSA signature generation",
          "title": "Vulnerability summary"
        },
        {
          "category": "other",
          "text": "This is a side channel attack which can used to exact pirate keys when ECDSA signatures are being generated. This attack is only feasible when the attacker is local to the machine or in certain cross-VM scenarios where the signature is being generated. Attacks over the network or via the internet are not feasible.",
          "title": "Statement"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2020-6829"
        },
        {
          "category": "external",
          "summary": "RHBZ#1826187",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1826187"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2020-6829",
          "url": "https://www.cve.org/CVERecord?id=CVE-2020-6829"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2020-6829",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2020-6829"
        },
        {
          "category": "external",
          "summary": "https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/NSS_3.55_release_notes",
          "url": "https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/NSS_3.55_release_notes"
        }
      ],
      "release_date": "2020-06-02T12:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-03-22T10:10:55+00:00",
          "details": "Download and install a new CLI binary by following the instructions linked from the References section.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:0949"
        },
        {
          "category": "workaround",
          "details": "Mitigation for this issue is either not available or the currently available options do not meet the Red Hat Product Security criteria comprising ease of use and deployment, applicability to widespread installation base or stability.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "LOCAL",
            "availabilityImpact": "NONE",
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "HIGH",
            "integrityImpact": "NONE",
            "privilegesRequired": "LOW",
            "scope": "UNCHANGED",
            "userInteraction": "REQUIRED",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:R/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "nss: Side channel attack on ECDSA signature generation"
    },
    {
      "cve": "CVE-2020-7595",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "discovery_date": "2020-02-06T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1799786"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "xmlStringLenDecodeEntities in parser.c in libxml2 2.9.10 has an infinite loop in a certain end-of-file situation.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "libxml2: infinite loop in xmlStringLenDecodeEntities in some end-of-file situations",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2020-7595"
        },
        {
          "category": "external",
          "summary": "RHBZ#1799786",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1799786"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2020-7595",
          "url": "https://www.cve.org/CVERecord?id=CVE-2020-7595"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2020-7595",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2020-7595"
        }
      ],
      "release_date": "2020-01-21T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-03-22T10:10:55+00:00",
          "details": "Download and install a new CLI binary by following the instructions linked from the References section.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:0949"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "libxml2: infinite loop in xmlStringLenDecodeEntities in some end-of-file situations"
    },
    {
      "cve": "CVE-2020-8177",
      "discovery_date": "2020-06-17T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1847915"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A flaw was found in curl. Overwriting local files is possible when using a certain combination of command line options. Requesting content from a malicious server could lead to overwriting local files with compromised files leading to unknown effects. The highest threat from this vulnerability is to file integrity.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "curl: Incorrect argument check can allow remote servers to overwrite local files",
          "title": "Vulnerability summary"
        },
        {
          "category": "other",
          "text": "This issue only affects the \u0027curl\u0027 command line utility. Additionally, this is only an issue when using the \u0027-J\u0027 (with the \u0027-O\u0027 option) and \u0027-i\u0027 command line options combined.\n\nIn most cases, there is nothing to gain for a local attacker here: the curl command line utility is likely running with the same privileges as the user, and thus the user can already overwrite all the files curl could overwrite. However, a local user will have to call curl with the \u0027-J\u0027 and \u0027-i\u0027 command line options while requesting content from a malicious server, which then opens up an opportunity for the malicious server to overwrite local files.",
          "title": "Statement"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2020-8177"
        },
        {
          "category": "external",
          "summary": "RHBZ#1847915",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1847915"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2020-8177",
          "url": "https://www.cve.org/CVERecord?id=CVE-2020-8177"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2020-8177",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2020-8177"
        },
        {
          "category": "external",
          "summary": "https://curl.haxx.se/docs/CVE-2020-8177.html",
          "url": "https://curl.haxx.se/docs/CVE-2020-8177.html"
        }
      ],
      "release_date": "2020-06-24T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-03-22T10:10:55+00:00",
          "details": "Download and install a new CLI binary by following the instructions linked from the References section.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:0949"
        },
        {
          "category": "workaround",
          "details": "The vulnerability is only possible when using the \u0027-J\u0027 and \u0027-i\u0027 switches in conjunction with the curl command.  Executing curl without these switches mitigates the flaw.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "NETWORK",
            "availabilityImpact": "LOW",
            "baseScore": 5.4,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "HIGH",
            "privilegesRequired": "LOW",
            "scope": "UNCHANGED",
            "userInteraction": "REQUIRED",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:R/S:U/C:N/I:H/A:L",
            "version": "3.1"
          },
          "products": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "curl: Incorrect argument check can allow remote servers to overwrite local files"
    },
    {
      "cve": "CVE-2020-10029",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "discovery_date": "2020-03-04T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1810670"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A flaw was found in glibc in versions prior to 2.32. Pseudo-zero values are not validated causing a stack corruption due to a stack-based overflow. The highest threat from this vulnerability is to system availability.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "glibc: stack corruption from crafted input in cosl, sinl, sincosl, and tanl functions",
          "title": "Vulnerability summary"
        },
        {
          "category": "other",
          "text": "The glibc version shipped with Red Hat Enterprise Linux 8 is compiled using gcc\u0027s stack-protector option which mitigates the possibility of code execution led by the stack corruption.\n\nThe glibc version shipped with Red Hat Enterprise Linux 7 is more difficult to exploit using this flaw, specifically for remote code execution. Because exploitation of the flaw depends on the usage of pseudo-zero values, an attacker can only overwrite the stack with 0s. Due to this, a valid address value for code execution is difficult to get and is likely to only result in a crash.",
          "title": "Statement"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2020-10029"
        },
        {
          "category": "external",
          "summary": "RHBZ#1810670",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1810670"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2020-10029",
          "url": "https://www.cve.org/CVERecord?id=CVE-2020-10029"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2020-10029",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2020-10029"
        }
      ],
      "release_date": "2020-02-12T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-03-22T10:10:55+00:00",
          "details": "Download and install a new CLI binary by following the instructions linked from the References section.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:0949"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "LOCAL",
            "availabilityImpact": "HIGH",
            "baseScore": 5.7,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "LOW",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:H",
            "version": "3.1"
          },
          "products": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "glibc: stack corruption from crafted input in cosl, sinl, sincosl, and tanl functions"
    },
    {
      "cve": "CVE-2020-12243",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "discovery_date": "2020-04-28T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1833535"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "In filter.c in slapd in OpenLDAP before 2.4.50, LDAP search filters with nested boolean expressions can result in denial of service (daemon crash).",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "openldap: denial of service via nested boolean expressions in LDAP search filters",
          "title": "Vulnerability summary"
        },
        {
          "category": "other",
          "text": "This issue does not affect Red Hat Enterprise Linux 8 because we don\u0027t ship openldap-servers subpackage with the Red Hat Enterprise Linux 8  (it is only present in the buildroot).",
          "title": "Statement"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2020-12243"
        },
        {
          "category": "external",
          "summary": "RHBZ#1833535",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1833535"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2020-12243",
          "url": "https://www.cve.org/CVERecord?id=CVE-2020-12243"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2020-12243",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2020-12243"
        }
      ],
      "release_date": "2020-04-28T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-03-22T10:10:55+00:00",
          "details": "Download and install a new CLI binary by following the instructions linked from the References section.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:0949"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "openldap: denial of service via nested boolean expressions in LDAP search filters"
    },
    {
      "acknowledgments": [
        {
          "names": [
            "the Mozilla Project"
          ]
        },
        {
          "names": [
            "Cesar Pereida Garcia and the Network and Information Security Group"
          ],
          "organization": "NISEC",
          "summary": "Acknowledged by upstream."
        }
      ],
      "cve": "CVE-2020-12400",
      "cwe": {
        "id": "CWE-327",
        "name": "Use of a Broken or Risky Cryptographic Algorithm"
      },
      "discovery_date": "2020-07-06T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1853983"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A side-channel flaw was found in NSS, in the way P-384 and P-521 curves are used in the generation of EDSA signatures, leaking partial information about the ECDSA nonce. Given a small number of ECDSA signatures, this information can be used to steal the private key. The highest threat from this vulnerability is to data confidentiality.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "nss: P-384 and P-521 implementation uses a side-channel vulnerable modular inversion function",
          "title": "Vulnerability summary"
        },
        {
          "category": "other",
          "text": "This is a side-channel attack that can be used to exact pirate keys when ECDSA signatures are being generated. This attack is only feasible when the attacker is local to the machine or in certain cross-VM scenarios where the signature is being generated. Attacks over the network or via the internet are not feasible.",
          "title": "Statement"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2020-12400"
        },
        {
          "category": "external",
          "summary": "RHBZ#1853983",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1853983"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2020-12400",
          "url": "https://www.cve.org/CVERecord?id=CVE-2020-12400"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2020-12400",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2020-12400"
        },
        {
          "category": "external",
          "summary": "https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/NSS_3.55_release_notes",
          "url": "https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/NSS_3.55_release_notes"
        }
      ],
      "release_date": "2020-07-28T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-03-22T10:10:55+00:00",
          "details": "Download and install a new CLI binary by following the instructions linked from the References section.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:0949"
        },
        {
          "category": "workaround",
          "details": "Mitigation for this issue is either not available or the currently available options do not meet the Red Hat Product Security criteria comprising ease of use and deployment, applicability to widespread installation base or stability.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "LOCAL",
            "availabilityImpact": "NONE",
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "HIGH",
            "integrityImpact": "NONE",
            "privilegesRequired": "LOW",
            "scope": "UNCHANGED",
            "userInteraction": "REQUIRED",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:R/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "nss: P-384 and P-521 implementation uses a side-channel vulnerable modular inversion function"
    },
    {
      "acknowledgments": [
        {
          "names": [
            "the Mozilla Project"
          ]
        },
        {
          "names": [
            "Cesar Pereida Garcia and the Network and Information Security Group"
          ],
          "organization": "NISEC",
          "summary": "Acknowledged by upstream."
        }
      ],
      "cve": "CVE-2020-12401",
      "cwe": {
        "id": "CWE-327",
        "name": "Use of a Broken or Risky Cryptographic Algorithm"
      },
      "discovery_date": "2020-06-26T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1851294"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A flaw was found in nss. Using the EM side-channel, it is possible to extract the position of zero and non-zero wNAF digits while nss-certutil tool performs scalar multiplication during the ECDSA signature generation, leaking partial information about the ECDSA nonce. Given a small number of ECDSA signatures, this information can be used to steal the private key. The highest threat from this vulnerability is to data confidentiality.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "nss: ECDSA timing attack mitigation bypass",
          "title": "Vulnerability summary"
        },
        {
          "category": "other",
          "text": "This is a side channel attack which can used to exact pirate keys when ECDSA signatures are being generated. This attack is only feasible when the attacker is local to the machine or in certain cross-VM scenarios where the signature is being generated. Attacks over the network or via the internet are not feasible.",
          "title": "Statement"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2020-12401"
        },
        {
          "category": "external",
          "summary": "RHBZ#1851294",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1851294"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2020-12401",
          "url": "https://www.cve.org/CVERecord?id=CVE-2020-12401"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2020-12401",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2020-12401"
        },
        {
          "category": "external",
          "summary": "https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/NSS_3.55_release_notes",
          "url": "https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/NSS_3.55_release_notes"
        }
      ],
      "release_date": "2020-06-30T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-03-22T10:10:55+00:00",
          "details": "Download and install a new CLI binary by following the instructions linked from the References section.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:0949"
        },
        {
          "category": "workaround",
          "details": "This is a side channel attack which can used to exact pirate keys when ECDSA signatures are being generated. This attack is only feasible when the attacker is local to the machine or in certain cross-VM scenarios where the signature is being generated. Attacks over the network or via the internet are not feasible.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "LOCAL",
            "availabilityImpact": "NONE",
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "HIGH",
            "integrityImpact": "NONE",
            "privilegesRequired": "LOW",
            "scope": "UNCHANGED",
            "userInteraction": "REQUIRED",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:R/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "nss: ECDSA timing attack mitigation bypass"
    },
    {
      "acknowledgments": [
        {
          "names": [
            "the Mozilla Project"
          ]
        },
        {
          "names": [
            "Billy Bob Brumley",
            "Cesar Pereida",
            "Nicola Tuveri",
            "Yuval Yarom"
          ],
          "organization": "Network and Information Security Group (NISEC",
          "summary": "Acknowledged by upstream."
        }
      ],
      "cve": "CVE-2020-12402",
      "cwe": {
        "id": "CWE-327",
        "name": "Use of a Broken or Risky Cryptographic Algorithm"
      },
      "discovery_date": "2020-04-20T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1826231"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A flaw was found in NSS, where it is vulnerable to RSA key generation cache timing side-channel attacks. An attacker with sufficient access to mount cache timing attacks during the RSA key generation process could recover the private key. The highest threat to this flaw is to confidentiality.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "nss: Side channel vulnerabilities during RSA key generation",
          "title": "Vulnerability summary"
        },
        {
          "category": "other",
          "text": "A timing attack was found in the way NSS generated RSA keys. A man-in-the-middle attacker could use this attack during RSA key generation to recover the private key. This attack is only feasible when the attacker is local to the machine or in certain cross-VM scenarios where the signature is being generated. Attacks over the network or via the internet are not feasible.",
          "title": "Statement"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2020-12402"
        },
        {
          "category": "external",
          "summary": "RHBZ#1826231",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1826231"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2020-12402",
          "url": "https://www.cve.org/CVERecord?id=CVE-2020-12402"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2020-12402",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2020-12402"
        },
        {
          "category": "external",
          "summary": "https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/NSS_3.53.1_release_notes",
          "url": "https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/NSS_3.53.1_release_notes"
        }
      ],
      "release_date": "2020-06-02T12:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-03-22T10:10:55+00:00",
          "details": "Download and install a new CLI binary by following the instructions linked from the References section.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:0949"
        },
        {
          "category": "workaround",
          "details": "Mitigation for this issue is either not available or the currently available options do not meet the Red Hat Product Security criteria comprising ease of use and deployment, applicability to widespread installation base or stability.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "LOCAL",
            "availabilityImpact": "NONE",
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "HIGH",
            "integrityImpact": "NONE",
            "privilegesRequired": "LOW",
            "scope": "UNCHANGED",
            "userInteraction": "REQUIRED",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:R/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "nss: Side channel vulnerabilities during RSA key generation"
    },
    {
      "acknowledgments": [
        {
          "names": [
            "the Mozilla Project"
          ]
        }
      ],
      "cve": "CVE-2020-12403",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "discovery_date": "2020-08-14T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1868931"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A flaw was found in the way CHACHA20-POLY1305 was implemented in NSS. When using multi-part Chacha20, it could cause out-of-bounds reads. This issue was fixed by explicitly disabling multi-part ChaCha20 (which was not functioning correctly) and strictly enforcing tag length. The highest threat from this vulnerability is to confidentiality and system availability.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "nss: CHACHA20-POLY1305 decryption with undersized tag leads to out-of-bounds read",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2020-12403"
        },
        {
          "category": "external",
          "summary": "RHBZ#1868931",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1868931"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2020-12403",
          "url": "https://www.cve.org/CVERecord?id=CVE-2020-12403"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2020-12403",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2020-12403"
        },
        {
          "category": "external",
          "summary": "https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/NSS_3.55_release_notes",
          "url": "https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/NSS_3.55_release_notes"
        }
      ],
      "release_date": "2020-07-27T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-03-22T10:10:55+00:00",
          "details": "Download and install a new CLI binary by following the instructions linked from the References section.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:0949"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "HIGH",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "nss: CHACHA20-POLY1305 decryption with undersized tag leads to out-of-bounds read"
    },
    {
      "cve": "CVE-2020-29573",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "discovery_date": "2020-12-05T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1905213"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A stack buffer overflow flaw was found in glibc in the way the printf family of functions processed an 80-bit long double with a non-canonical bit pattern. This flaw allows an attacker who can control the arguments of these functions with the non-standard long double pattern to trigger an overflow and cause an application crash. The highest threat from this vulnerability is to system availability.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "glibc: stack-based buffer overflow if the input to any of the printf family of functions is an 80-bit long double with a non-canonical bit pattern",
          "title": "Vulnerability summary"
        },
        {
          "category": "other",
          "text": "This is essentially a crash which can only be triggered by a non-standard argument passed as a long double input to a member of printf family of functions. The application has to be written in this way to allow this issue to be triggered. The maximum impact is an application crash.",
          "title": "Statement"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2020-29573"
        },
        {
          "category": "external",
          "summary": "RHBZ#1905213",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1905213"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2020-29573",
          "url": "https://www.cve.org/CVERecord?id=CVE-2020-29573"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2020-29573",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2020-29573"
        },
        {
          "category": "external",
          "summary": "https://sourceware.org/pipermail/libc-alpha/2020-September/117779.html",
          "url": "https://sourceware.org/pipermail/libc-alpha/2020-September/117779.html"
        }
      ],
      "release_date": "2020-09-22T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-03-22T10:10:55+00:00",
          "details": "Download and install a new CLI binary by following the instructions linked from the References section.",
          "product_ids": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:0949"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "7Server-RHODO-1:openshiftdo/odo-init-image-rhel7@sha256:83eea230500106cf84b287fb7249be475171c8ff9ced7025cbf628a213cb9d96_amd64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "glibc: stack-based buffer overflow if the input to any of the printf family of functions is an 80-bit long double with a non-canonical bit pattern"
    }
  ]
}

{
  "document": {
    "aggregate_severity": {
      "namespace": "https://access.redhat.com/security/updates/classification/",
      "text": "Important"
    },
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Copyright \u00a9 Red Hat, Inc. All rights reserved.",
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Updated packages that provide Red Hat JBoss Core Services Pack Apache Server 2.4.37 and fix several bugs, and add various enhancements are now available for Red Hat Enterprise Linux 6 and Red Hat Enterprise Linux 7.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.",
        "title": "Topic"
      },
      {
        "category": "general",
        "text": "This release adds the new Apache HTTP Server 2.4.37 Service Pack 3 packages that are part of the JBoss Core Services offering.\n\nThis release serves as a replacement for Red Hat JBoss Core Services Pack Apache Server 2.4.37 Service Pack 2 and includes bug fixes and enhancements. Refer to the Release Notes for information on the most significant bug fixes and enhancements included in this release.\n\nSecurity fix(es):\n\n* httpd: mod_http2: read-after-free on a string compare (CVE-2019-0196)\n* httpd: mod_http2: possible crash on late upgrade (CVE-2019-0197)\n* httpd: mod_proxy_ftp use of uninitialized value (CVE-2020-1934)\n* nghttp2: overly large SETTINGS frames can lead to DoS (CVE-2020-11080)\n* libxml2: There\u0027s a memory leak in xmlParseBalancedChunkMemoryRecover in parser.c that could result in a crash (CVE-2019-19956)\n* libxml2: memory leak in xmlSchemaPreRun in xmlschemas.c (CVE-2019-20388)\n* libxml2: infinite loop in xmlStringLenDecodeEntities in some end-of-file situations (CVE-2020-7595)\n* expat: large number of colons in input makes parser consume high amount of resources, leading to DoS (CVE-2018-20843)\n* expat: heap-based buffer over-read via crafted XML input (CVE-2019-15903)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.",
        "title": "Details"
      },
      {
        "category": "legal_disclaimer",
        "text": "This content is licensed under the Creative Commons Attribution 4.0 International License (https://creativecommons.org/licenses/by/4.0/). If you distribute this content, or a modified version of it, you must provide attribution to Red Hat Inc. and provide a link to the original.",
        "title": "Terms of Use"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "https://access.redhat.com/security/team/contact/",
      "issuing_authority": "Red Hat Product Security is responsible for vulnerability handling across all Red Hat products and services.",
      "name": "Red Hat Product Security",
      "namespace": "https://www.redhat.com"
    },
    "references": [
      {
        "category": "self",
        "summary": "https://access.redhat.com/errata/RHSA-2020:2644",
        "url": "https://access.redhat.com/errata/RHSA-2020:2644"
      },
      {
        "category": "external",
        "summary": "https://access.redhat.com/security/updates/classification/#important",
        "url": "https://access.redhat.com/security/updates/classification/#important"
      },
      {
        "category": "external",
        "summary": "1695030",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1695030"
      },
      {
        "category": "external",
        "summary": "1695042",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1695042"
      },
      {
        "category": "external",
        "summary": "1723723",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1723723"
      },
      {
        "category": "external",
        "summary": "1752592",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1752592"
      },
      {
        "category": "external",
        "summary": "1788856",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1788856"
      },
      {
        "category": "external",
        "summary": "1799734",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1799734"
      },
      {
        "category": "external",
        "summary": "1799786",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1799786"
      },
      {
        "category": "external",
        "summary": "1820772",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1820772"
      },
      {
        "category": "external",
        "summary": "1844929",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1844929"
      },
      {
        "category": "external",
        "summary": "JBCS-941",
        "url": "https://issues.redhat.com/browse/JBCS-941"
      },
      {
        "category": "self",
        "summary": "Canonical URL",
        "url": "https://security.access.redhat.com/data/csaf/v2/advisories/2020/rhsa-2020_2644.json"
      }
    ],
    "title": "Red Hat Security Advisory: Red Hat JBoss Core Services Apache HTTP Server 2.4.37 SP3 security update",
    "tracking": {
      "current_release_date": "2024-11-05T22:22:06+00:00",
      "generator": {
        "date": "2024-11-05T22:22:06+00:00",
        "engine": {
          "name": "Red Hat SDEngine",
          "version": "4.1.1"
        }
      },
      "id": "RHSA-2020:2644",
      "initial_release_date": "2020-06-22T12:28:02+00:00",
      "revision_history": [
        {
          "date": "2020-06-22T12:28:02+00:00",
          "number": "1",
          "summary": "Initial version"
        },
        {
          "date": "2020-06-22T12:28:02+00:00",
          "number": "2",
          "summary": "Last updated version"
        },
        {
          "date": "2024-11-05T22:22:06+00:00",
          "number": "3",
          "summary": "Last generated version"
        }
      ],
      "status": "final",
      "version": "3"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_name",
                "name": "Red Hat JBoss Core Services on RHEL 6 Server",
                "product": {
                  "name": "Red Hat JBoss Core Services on RHEL 6 Server",
                  "product_id": "6Server-JBCS",
                  "product_identification_helper": {
                    "cpe": "cpe:/a:redhat:jboss_core_services:1::el6"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "Red Hat JBoss Core Services on RHEL 7 Server",
                "product": {
                  "name": "Red Hat JBoss Core Services on RHEL 7 Server",
                  "product_id": "7Server-JBCS",
                  "product_identification_helper": {
                    "cpe": "cpe:/a:redhat:jboss_core_services:1::el7"
                  }
                }
              }
            ],
            "category": "product_family",
            "name": "Red Hat JBoss Core Services"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.i686",
                "product": {
                  "name": "jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.i686",
                  "product_id": "jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-nghttp2@1.39.2-25.jbcs.el6?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.i686",
                "product": {
                  "name": "jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.i686",
                  "product_id": "jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-nghttp2-devel@1.39.2-25.jbcs.el6?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.i686",
                "product": {
                  "name": "jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.i686",
                  "product_id": "jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-nghttp2-debuginfo@1.39.2-25.jbcs.el6?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.i686",
                "product": {
                  "name": "jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.i686",
                  "product_id": "jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-curl@7.64.1-36.jbcs.el6?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.i686",
                "product": {
                  "name": "jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.i686",
                  "product_id": "jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-libcurl@7.64.1-36.jbcs.el6?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.i686",
                "product": {
                  "name": "jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.i686",
                  "product_id": "jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-libcurl-devel@7.64.1-36.jbcs.el6?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.i686",
                "product": {
                  "name": "jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.i686",
                  "product_id": "jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-curl-debuginfo@7.64.1-36.jbcs.el6?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.i686",
                "product": {
                  "name": "jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.i686",
                  "product_id": "jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-httpd@2.4.37-57.jbcs.el6?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.i686",
                "product": {
                  "name": "jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.i686",
                  "product_id": "jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-httpd-devel@2.4.37-57.jbcs.el6?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.i686",
                "product": {
                  "name": "jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.i686",
                  "product_id": "jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-httpd-selinux@2.4.37-57.jbcs.el6?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.i686",
                "product": {
                  "name": "jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.i686",
                  "product_id": "jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-httpd-tools@2.4.37-57.jbcs.el6?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.i686",
                "product": {
                  "name": "jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.i686",
                  "product_id": "jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_ldap@2.4.37-57.jbcs.el6?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.i686",
                "product": {
                  "name": "jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.i686",
                  "product_id": "jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_proxy_html@2.4.37-57.jbcs.el6?arch=i686\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.i686",
                "product": {
                  "name": "jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.i686",
                  "product_id": "jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_session@2.4.37-57.jbcs.el6?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.i686",
                "product": {
                  "name": "jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.i686",
                  "product_id": "jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_ssl@2.4.37-57.jbcs.el6?arch=i686\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.i686",
                "product": {
                  "name": "jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.i686",
                  "product_id": "jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-httpd-debuginfo@2.4.37-57.jbcs.el6?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.i686",
                "product": {
                  "name": "jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.i686",
                  "product_id": "jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_http2@1.15.7-3.jbcs.el6?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.i686",
                "product": {
                  "name": "jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.i686",
                  "product_id": "jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_http2-debuginfo@1.15.7-3.jbcs.el6?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.i686",
                "product": {
                  "name": "jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.i686",
                  "product_id": "jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_jk-ap24@1.2.48-4.redhat_1.jbcs.el6?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.i686",
                "product": {
                  "name": "jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.i686",
                  "product_id": "jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_jk-manual@1.2.48-4.redhat_1.jbcs.el6?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.i686",
                "product": {
                  "name": "jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.i686",
                  "product_id": "jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_jk-debuginfo@1.2.48-4.redhat_1.jbcs.el6?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.i686",
                "product": {
                  "name": "jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.i686",
                  "product_id": "jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_md@2.0.8-24.jbcs.el6?arch=i686\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.i686",
                "product": {
                  "name": "jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.i686",
                  "product_id": "jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_md-debuginfo@2.0.8-24.jbcs.el6?arch=i686\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.i686",
                "product": {
                  "name": "jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.i686",
                  "product_id": "jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_security@2.9.2-51.GA.jbcs.el6?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.i686",
                "product": {
                  "name": "jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.i686",
                  "product_id": "jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_security-debuginfo@2.9.2-51.GA.jbcs.el6?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
                "product": {
                  "name": "jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
                  "product_id": "jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_cluster-native@1.3.14-4.Final_redhat_2.jbcs.el6?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
                "product": {
                  "name": "jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
                  "product_id": "jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_cluster-native-debuginfo@1.3.14-4.Final_redhat_2.jbcs.el6?arch=i686"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "i686"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.x86_64",
                "product": {
                  "name": "jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.x86_64",
                  "product_id": "jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-nghttp2@1.39.2-25.jbcs.el6?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.x86_64",
                "product": {
                  "name": "jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.x86_64",
                  "product_id": "jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-nghttp2-devel@1.39.2-25.jbcs.el6?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.x86_64",
                "product": {
                  "name": "jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.x86_64",
                  "product_id": "jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-nghttp2-debuginfo@1.39.2-25.jbcs.el6?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.x86_64",
                "product": {
                  "name": "jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.x86_64",
                  "product_id": "jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-curl@7.64.1-36.jbcs.el6?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.x86_64",
                "product": {
                  "name": "jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.x86_64",
                  "product_id": "jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-libcurl@7.64.1-36.jbcs.el6?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.x86_64",
                "product": {
                  "name": "jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.x86_64",
                  "product_id": "jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-libcurl-devel@7.64.1-36.jbcs.el6?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.x86_64",
                "product": {
                  "name": "jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.x86_64",
                  "product_id": "jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-curl-debuginfo@7.64.1-36.jbcs.el6?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.x86_64",
                "product": {
                  "name": "jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.x86_64",
                  "product_id": "jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-httpd@2.4.37-57.jbcs.el6?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.x86_64",
                "product": {
                  "name": "jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.x86_64",
                  "product_id": "jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-httpd-devel@2.4.37-57.jbcs.el6?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.x86_64",
                "product": {
                  "name": "jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.x86_64",
                  "product_id": "jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-httpd-selinux@2.4.37-57.jbcs.el6?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.x86_64",
                "product": {
                  "name": "jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.x86_64",
                  "product_id": "jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-httpd-tools@2.4.37-57.jbcs.el6?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.x86_64",
                  "product_id": "jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_ldap@2.4.37-57.jbcs.el6?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.x86_64",
                  "product_id": "jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_proxy_html@2.4.37-57.jbcs.el6?arch=x86_64\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.x86_64",
                  "product_id": "jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_session@2.4.37-57.jbcs.el6?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.x86_64",
                  "product_id": "jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_ssl@2.4.37-57.jbcs.el6?arch=x86_64\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.x86_64",
                "product": {
                  "name": "jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.x86_64",
                  "product_id": "jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-httpd-debuginfo@2.4.37-57.jbcs.el6?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.x86_64",
                  "product_id": "jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_http2@1.15.7-3.jbcs.el6?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.x86_64",
                  "product_id": "jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_http2-debuginfo@1.15.7-3.jbcs.el6?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
                  "product_id": "jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_jk-ap24@1.2.48-4.redhat_1.jbcs.el6?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
                  "product_id": "jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_jk-manual@1.2.48-4.redhat_1.jbcs.el6?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
                  "product_id": "jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_jk-debuginfo@1.2.48-4.redhat_1.jbcs.el6?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.x86_64",
                  "product_id": "jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_md@2.0.8-24.jbcs.el6?arch=x86_64\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.x86_64",
                  "product_id": "jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_md-debuginfo@2.0.8-24.jbcs.el6?arch=x86_64\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.x86_64",
                  "product_id": "jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_security@2.9.2-51.GA.jbcs.el6?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.x86_64",
                  "product_id": "jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_security-debuginfo@2.9.2-51.GA.jbcs.el6?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
                  "product_id": "jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_cluster-native@1.3.14-4.Final_redhat_2.jbcs.el6?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
                  "product_id": "jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_cluster-native-debuginfo@1.3.14-4.Final_redhat_2.jbcs.el6?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.x86_64",
                "product": {
                  "name": "jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.x86_64",
                  "product_id": "jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-nghttp2@1.39.2-25.jbcs.el7?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el7.x86_64",
                "product": {
                  "name": "jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el7.x86_64",
                  "product_id": "jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el7.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-nghttp2-devel@1.39.2-25.jbcs.el7?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el7.x86_64",
                "product": {
                  "name": "jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el7.x86_64",
                  "product_id": "jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el7.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-nghttp2-debuginfo@1.39.2-25.jbcs.el7?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.x86_64",
                "product": {
                  "name": "jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.x86_64",
                  "product_id": "jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-curl@7.64.1-36.jbcs.el7?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el7.x86_64",
                "product": {
                  "name": "jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el7.x86_64",
                  "product_id": "jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el7.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-libcurl@7.64.1-36.jbcs.el7?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el7.x86_64",
                "product": {
                  "name": "jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el7.x86_64",
                  "product_id": "jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el7.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-libcurl-devel@7.64.1-36.jbcs.el7?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el7.x86_64",
                "product": {
                  "name": "jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el7.x86_64",
                  "product_id": "jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el7.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-curl-debuginfo@7.64.1-36.jbcs.el7?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.x86_64",
                "product": {
                  "name": "jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.x86_64",
                  "product_id": "jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-httpd@2.4.37-57.jbcs.el7?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el7.x86_64",
                "product": {
                  "name": "jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el7.x86_64",
                  "product_id": "jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el7.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-httpd-devel@2.4.37-57.jbcs.el7?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el7.x86_64",
                "product": {
                  "name": "jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el7.x86_64",
                  "product_id": "jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el7.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-httpd-selinux@2.4.37-57.jbcs.el7?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el7.x86_64",
                "product": {
                  "name": "jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el7.x86_64",
                  "product_id": "jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el7.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-httpd-tools@2.4.37-57.jbcs.el7?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el7.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el7.x86_64",
                  "product_id": "jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el7.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_ldap@2.4.37-57.jbcs.el7?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el7.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el7.x86_64",
                  "product_id": "jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el7.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_proxy_html@2.4.37-57.jbcs.el7?arch=x86_64\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el7.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el7.x86_64",
                  "product_id": "jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el7.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_session@2.4.37-57.jbcs.el7?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el7.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el7.x86_64",
                  "product_id": "jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el7.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_ssl@2.4.37-57.jbcs.el7?arch=x86_64\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el7.x86_64",
                "product": {
                  "name": "jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el7.x86_64",
                  "product_id": "jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el7.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-httpd-debuginfo@2.4.37-57.jbcs.el7?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.x86_64",
                "product": {
                  "name": "jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.x86_64",
                  "product_id": "jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-openssl-pkcs11@0.4.10-7.jbcs.el7?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-7.jbcs.el7.x86_64",
                "product": {
                  "name": "jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-7.jbcs.el7.x86_64",
                  "product_id": "jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-7.jbcs.el7.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-openssl-pkcs11-debuginfo@0.4.10-7.jbcs.el7?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.x86_64",
                  "product_id": "jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_http2@1.15.7-3.jbcs.el7?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el7.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el7.x86_64",
                  "product_id": "jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el7.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_http2-debuginfo@1.15.7-3.jbcs.el7?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
                  "product_id": "jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_jk-ap24@1.2.48-4.redhat_1.jbcs.el7?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
                  "product_id": "jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_jk-manual@1.2.48-4.redhat_1.jbcs.el7?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
                  "product_id": "jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_jk-debuginfo@1.2.48-4.redhat_1.jbcs.el7?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.x86_64",
                  "product_id": "jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_md@2.0.8-24.jbcs.el7?arch=x86_64\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el7.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el7.x86_64",
                  "product_id": "jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el7.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_md-debuginfo@2.0.8-24.jbcs.el7?arch=x86_64\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.x86_64",
                  "product_id": "jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_security@2.9.2-51.GA.jbcs.el7?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el7.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el7.x86_64",
                  "product_id": "jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el7.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_security-debuginfo@2.9.2-51.GA.jbcs.el7?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
                  "product_id": "jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_cluster-native@1.3.14-4.Final_redhat_2.jbcs.el7?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
                  "product_id": "jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_cluster-native-debuginfo@1.3.14-4.Final_redhat_2.jbcs.el7?arch=x86_64"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "x86_64"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.src",
                "product": {
                  "name": "jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.src",
                  "product_id": "jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-nghttp2@1.39.2-25.jbcs.el6?arch=src"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.src",
                "product": {
                  "name": "jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.src",
                  "product_id": "jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-curl@7.64.1-36.jbcs.el6?arch=src"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.src",
                "product": {
                  "name": "jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.src",
                  "product_id": "jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-httpd@2.4.37-57.jbcs.el6?arch=src"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.src",
                "product": {
                  "name": "jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.src",
                  "product_id": "jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_http2@1.15.7-3.jbcs.el6?arch=src"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el6.src",
                "product": {
                  "name": "jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el6.src",
                  "product_id": "jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el6.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_jk@1.2.48-4.redhat_1.jbcs.el6?arch=src"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.src",
                "product": {
                  "name": "jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.src",
                  "product_id": "jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_md@2.0.8-24.jbcs.el6?arch=src\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.src",
                "product": {
                  "name": "jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.src",
                  "product_id": "jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_security@2.9.2-51.GA.jbcs.el6?arch=src"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.src",
                "product": {
                  "name": "jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.src",
                  "product_id": "jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_cluster-native@1.3.14-4.Final_redhat_2.jbcs.el6?arch=src"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.src",
                "product": {
                  "name": "jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.src",
                  "product_id": "jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-nghttp2@1.39.2-25.jbcs.el7?arch=src"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.src",
                "product": {
                  "name": "jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.src",
                  "product_id": "jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-curl@7.64.1-36.jbcs.el7?arch=src"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.src",
                "product": {
                  "name": "jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.src",
                  "product_id": "jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-httpd@2.4.37-57.jbcs.el7?arch=src"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.src",
                "product": {
                  "name": "jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.src",
                  "product_id": "jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-openssl-pkcs11@0.4.10-7.jbcs.el7?arch=src"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.src",
                "product": {
                  "name": "jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.src",
                  "product_id": "jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_http2@1.15.7-3.jbcs.el7?arch=src"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el7.src",
                "product": {
                  "name": "jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el7.src",
                  "product_id": "jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el7.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_jk@1.2.48-4.redhat_1.jbcs.el7?arch=src"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.src",
                "product": {
                  "name": "jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.src",
                  "product_id": "jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_md@2.0.8-24.jbcs.el7?arch=src\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.src",
                "product": {
                  "name": "jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.src",
                  "product_id": "jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_security@2.9.2-51.GA.jbcs.el7?arch=src"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.src",
                "product": {
                  "name": "jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.src",
                  "product_id": "jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_cluster-native@1.3.14-4.Final_redhat_2.jbcs.el7?arch=src"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "src"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el6.noarch",
                "product": {
                  "name": "jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el6.noarch",
                  "product_id": "jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el6.noarch",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-httpd-manual@2.4.37-57.jbcs.el6?arch=noarch"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el7.noarch",
                "product": {
                  "name": "jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el7.noarch",
                  "product_id": "jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el7.noarch",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-httpd-manual@2.4.37-57.jbcs.el7?arch=noarch"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "noarch"
          }
        ],
        "category": "vendor",
        "name": "Red Hat"
      }
    ],
    "relationships": [
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.i686 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.i686"
        },
        "product_reference": "jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.i686",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.src as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.src"
        },
        "product_reference": "jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.src",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.x86_64 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.x86_64"
        },
        "product_reference": "jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.x86_64",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.i686 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.i686"
        },
        "product_reference": "jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.i686",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.x86_64 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.x86_64"
        },
        "product_reference": "jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.x86_64",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.i686 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.i686"
        },
        "product_reference": "jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.i686",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.src as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.src"
        },
        "product_reference": "jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.src",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.x86_64 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.x86_64"
        },
        "product_reference": "jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.x86_64",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.i686 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.i686"
        },
        "product_reference": "jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.i686",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.x86_64 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.x86_64"
        },
        "product_reference": "jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.x86_64",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.i686 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.i686"
        },
        "product_reference": "jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.i686",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.x86_64 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.x86_64"
        },
        "product_reference": "jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.x86_64",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el6.noarch as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el6.noarch"
        },
        "product_reference": "jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el6.noarch",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.i686 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.i686"
        },
        "product_reference": "jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.i686",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.x86_64 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.x86_64"
        },
        "product_reference": "jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.x86_64",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.i686 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.i686"
        },
        "product_reference": "jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.i686",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.x86_64 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.x86_64"
        },
        "product_reference": "jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.x86_64",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.i686 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.i686"
        },
        "product_reference": "jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.i686",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.x86_64 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.x86_64"
        },
        "product_reference": "jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.x86_64",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.i686 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.i686"
        },
        "product_reference": "jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.i686",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.x86_64 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.x86_64"
        },
        "product_reference": "jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.x86_64",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686"
        },
        "product_reference": "jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.src as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.src"
        },
        "product_reference": "jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.src",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686"
        },
        "product_reference": "jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.i686 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.i686"
        },
        "product_reference": "jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.i686",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.src as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.src"
        },
        "product_reference": "jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.src",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.x86_64 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.x86_64",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.i686 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.i686"
        },
        "product_reference": "jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.i686",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.x86_64 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.x86_64",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el6.src as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el6.src"
        },
        "product_reference": "jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el6.src",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.i686 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.i686"
        },
        "product_reference": "jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.i686",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.x86_64 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.i686 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.i686"
        },
        "product_reference": "jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.i686",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.x86_64 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.i686 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.i686"
        },
        "product_reference": "jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.i686",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.x86_64 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.i686 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.i686"
        },
        "product_reference": "jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.i686",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.x86_64 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.x86_64",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.i686 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.i686"
        },
        "product_reference": "jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.i686",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.src as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.src"
        },
        "product_reference": "jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.src",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.x86_64 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.x86_64",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.i686 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.i686"
        },
        "product_reference": "jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.i686",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.x86_64 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.x86_64",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.i686 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.i686"
        },
        "product_reference": "jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.i686",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.x86_64 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.x86_64",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.i686 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.i686"
        },
        "product_reference": "jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.i686",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.src as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.src"
        },
        "product_reference": "jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.src",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.x86_64 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.x86_64",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.i686 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.i686"
        },
        "product_reference": "jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.i686",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.x86_64 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.x86_64",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.i686 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.i686"
        },
        "product_reference": "jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.i686",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.x86_64 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.x86_64",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.i686 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.i686"
        },
        "product_reference": "jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.i686",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.x86_64 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.x86_64",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.i686 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.i686"
        },
        "product_reference": "jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.i686",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.src as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.src"
        },
        "product_reference": "jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.src",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.x86_64 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.x86_64"
        },
        "product_reference": "jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.x86_64",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.i686 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.i686"
        },
        "product_reference": "jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.i686",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.x86_64 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.x86_64"
        },
        "product_reference": "jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.x86_64",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.i686 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.i686"
        },
        "product_reference": "jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.i686",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.x86_64 as a component of Red Hat JBoss Core Services on RHEL 6 Server",
          "product_id": "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.x86_64"
        },
        "product_reference": "jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.x86_64",
        "relates_to_product_reference": "6Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.src as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.src"
        },
        "product_reference": "jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.src",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.x86_64"
        },
        "product_reference": "jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el7.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el7.x86_64"
        },
        "product_reference": "jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el7.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.src as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.src"
        },
        "product_reference": "jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.src",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.x86_64"
        },
        "product_reference": "jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el7.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el7.x86_64"
        },
        "product_reference": "jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el7.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el7.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el7.x86_64"
        },
        "product_reference": "jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el7.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el7.noarch as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el7.noarch"
        },
        "product_reference": "jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el7.noarch",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el7.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el7.x86_64"
        },
        "product_reference": "jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el7.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el7.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el7.x86_64"
        },
        "product_reference": "jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el7.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el7.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el7.x86_64"
        },
        "product_reference": "jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el7.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el7.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el7.x86_64"
        },
        "product_reference": "jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el7.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.src as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.src"
        },
        "product_reference": "jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.src",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.src as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.src"
        },
        "product_reference": "jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.src",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el7.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el7.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el7.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el7.src as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el7.src"
        },
        "product_reference": "jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el7.src",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el7.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el7.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el7.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el7.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el7.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el7.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el7.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el7.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el7.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.src as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.src"
        },
        "product_reference": "jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.src",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el7.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el7.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el7.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el7.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el7.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el7.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.src as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.src"
        },
        "product_reference": "jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.src",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el7.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el7.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el7.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el7.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el7.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el7.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el7.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el7.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el7.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.src as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.src"
        },
        "product_reference": "jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.src",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.x86_64"
        },
        "product_reference": "jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el7.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el7.x86_64"
        },
        "product_reference": "jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el7.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el7.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el7.x86_64"
        },
        "product_reference": "jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el7.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.src as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.src"
        },
        "product_reference": "jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.src",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.x86_64"
        },
        "product_reference": "jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-7.jbcs.el7.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-7.jbcs.el7.x86_64"
        },
        "product_reference": "jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-7.jbcs.el7.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2018-20843",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "discovery_date": "2019-06-24T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1723723"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "It was discovered that the \"setElementTypePrefix()\" function incorrectly extracted XML namespace prefixes. By tricking an application into processing a specially crafted XML file, an attacker could cause unusually high consumption of memory resources and possibly lead to a denial of service.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "expat: large number of colons in input makes parser consume high amount of resources, leading to DoS",
          "title": "Vulnerability summary"
        },
        {
          "category": "other",
          "text": "When processing a specially crafted XML file, expat may use more memory than ultimately necessary, which can also lead to increased CPU usage and longer processing times. Depending on available system resources and configuration, this may also lead to the application triggering the Out-Of-Memory-Killer, causing the application to be terminated.",
          "title": "Statement"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el6.noarch",
          "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.x86_64",
          "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el7.noarch",
          "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-7.jbcs.el7.x86_64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2018-20843"
        },
        {
          "category": "external",
          "summary": "RHBZ#1723723",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1723723"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2018-20843",
          "url": "https://www.cve.org/CVERecord?id=CVE-2018-20843"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2018-20843",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2018-20843"
        },
        {
          "category": "external",
          "summary": "https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=931031",
          "url": "https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=931031"
        }
      ],
      "release_date": "2019-06-24T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2020-06-22T12:28:02+00:00",
          "details": "Before applying this update, make sure all previously released errata\nrelevant to your system have been applied.\n\nFor details on how to apply this update, refer to:\n\nhttps://access.redhat.com/articles/11258",
          "product_ids": [
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el6.noarch",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el7.noarch",
            "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-7.jbcs.el7.x86_64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2020:2644"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el6.noarch",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el7.noarch",
            "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-7.jbcs.el7.x86_64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "expat: large number of colons in input makes parser consume high amount of resources, leading to DoS"
    },
    {
      "cve": "CVE-2019-0196",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "discovery_date": "2019-04-02T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1695030"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A vulnerability was found in Apache HTTP Server 2.4.17 to 2.4.38. Using fuzzed network input, the http/2 request handling could be made to access freed memory in string comparison when determining the method of a request and thus process the request incorrectly.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "httpd: mod_http2: read-after-free on a string compare",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el6.noarch",
          "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.x86_64",
          "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el7.noarch",
          "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-7.jbcs.el7.x86_64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-0196"
        },
        {
          "category": "external",
          "summary": "RHBZ#1695030",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1695030"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-0196",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-0196"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-0196",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-0196"
        },
        {
          "category": "external",
          "summary": "http://www.apache.org/dist/httpd/CHANGES_2.4",
          "url": "http://www.apache.org/dist/httpd/CHANGES_2.4"
        },
        {
          "category": "external",
          "summary": "https://httpd.apache.org/security/vulnerabilities_24.html",
          "url": "https://httpd.apache.org/security/vulnerabilities_24.html"
        }
      ],
      "release_date": "2019-04-01T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2020-06-22T12:28:02+00:00",
          "details": "Before applying this update, make sure all previously released errata\nrelevant to your system have been applied.\n\nFor details on how to apply this update, refer to:\n\nhttps://access.redhat.com/articles/11258",
          "product_ids": [
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el6.noarch",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el7.noarch",
            "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-7.jbcs.el7.x86_64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2020:2644"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "LOW",
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.0"
          },
          "products": [
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el6.noarch",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el7.noarch",
            "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-7.jbcs.el7.x86_64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Low"
        }
      ],
      "title": "httpd: mod_http2: read-after-free on a string compare"
    },
    {
      "cve": "CVE-2019-0197",
      "cwe": {
        "id": "CWE-444",
        "name": "Inconsistent Interpretation of HTTP Requests (\u0027HTTP Request/Response Smuggling\u0027)"
      },
      "discovery_date": "2019-04-02T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1695042"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A vulnerability was found in Apache HTTP Server 2.4.34 to 2.4.38. When HTTP/2 was enabled for a http: host or H2Upgrade was enabled for h2 on a https: host, an Upgrade request from http/1.1 to http/2 that was not the first request on a connection could lead to a misconfiguration and crash. Server that never enabled the h2 protocol or that only enabled it for https: and did not set \"H2Upgrade on\" are unaffected by this issue.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "httpd: mod_http2: possible crash on late upgrade",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el6.noarch",
          "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.x86_64",
          "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el7.noarch",
          "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-7.jbcs.el7.x86_64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-0197"
        },
        {
          "category": "external",
          "summary": "RHBZ#1695042",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1695042"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-0197",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-0197"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-0197",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-0197"
        },
        {
          "category": "external",
          "summary": "http://www.apache.org/dist/httpd/CHANGES_2.4",
          "url": "http://www.apache.org/dist/httpd/CHANGES_2.4"
        },
        {
          "category": "external",
          "summary": "https://httpd.apache.org/security/vulnerabilities_24.html",
          "url": "https://httpd.apache.org/security/vulnerabilities_24.html"
        }
      ],
      "release_date": "2019-02-01T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2020-06-22T12:28:02+00:00",
          "details": "Before applying this update, make sure all previously released errata\nrelevant to your system have been applied.\n\nFor details on how to apply this update, refer to:\n\nhttps://access.redhat.com/articles/11258",
          "product_ids": [
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el6.noarch",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el7.noarch",
            "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-7.jbcs.el7.x86_64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2020:2644"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "NETWORK",
            "availabilityImpact": "LOW",
            "baseScore": 4.2,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "LOW",
            "privilegesRequired": "LOW",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.0/AV:N/AC:H/PR:L/UI:N/S:U/C:N/I:L/A:L",
            "version": "3.0"
          },
          "products": [
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el6.noarch",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el7.noarch",
            "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-7.jbcs.el7.x86_64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Low"
        }
      ],
      "title": "httpd: mod_http2: possible crash on late upgrade"
    },
    {
      "cve": "CVE-2019-15903",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "discovery_date": "2019-09-04T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1752592"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "In libexpat before 2.2.8, crafted XML input could fool the parser into changing from DTD parsing to document parsing too early; a consecutive call to XML_GetCurrentLineNumber (or XML_GetCurrentColumnNumber) then resulted in a heap-based buffer over-read.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "expat: heap-based buffer over-read via crafted XML input",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el6.noarch",
          "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.x86_64",
          "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el7.noarch",
          "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-7.jbcs.el7.x86_64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-15903"
        },
        {
          "category": "external",
          "summary": "RHBZ#1752592",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1752592"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-15903",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-15903"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-15903",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-15903"
        }
      ],
      "release_date": "2019-09-04T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2020-06-22T12:28:02+00:00",
          "details": "Before applying this update, make sure all previously released errata\nrelevant to your system have been applied.\n\nFor details on how to apply this update, refer to:\n\nhttps://access.redhat.com/articles/11258",
          "product_ids": [
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el6.noarch",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el7.noarch",
            "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-7.jbcs.el7.x86_64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2020:2644"
        },
        {
          "category": "workaround",
          "details": "Mitigation for this issue is either not available or the currently available options don\u0027t meet the Red Hat Product Security criteria comprising ease of use and deployment, applicability to widespread installation base or stability.",
          "product_ids": [
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el6.noarch",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el7.noarch",
            "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-7.jbcs.el7.x86_64"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.0"
          },
          "products": [
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el6.noarch",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el7.noarch",
            "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-7.jbcs.el7.x86_64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Low"
        }
      ],
      "title": "expat: heap-based buffer over-read via crafted XML input"
    },
    {
      "cve": "CVE-2019-19956",
      "cwe": {
        "id": "CWE-772",
        "name": "Missing Release of Resource after Effective Lifetime"
      },
      "discovery_date": "2020-01-08T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1788856"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "xmlParseBalancedChunkMemoryRecover in parser.c in libxml2 before 2.9.10 has a memory leak related to newDoc-\u003eoldNs.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "libxml2: memory leak in xmlParseBalancedChunkMemoryRecover in parser.c",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el6.noarch",
          "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.x86_64",
          "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el7.noarch",
          "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-7.jbcs.el7.x86_64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-19956"
        },
        {
          "category": "external",
          "summary": "RHBZ#1788856",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1788856"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-19956",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-19956"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-19956",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-19956"
        }
      ],
      "release_date": "2020-01-08T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2020-06-22T12:28:02+00:00",
          "details": "Before applying this update, make sure all previously released errata\nrelevant to your system have been applied.\n\nFor details on how to apply this update, refer to:\n\nhttps://access.redhat.com/articles/11258",
          "product_ids": [
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el6.noarch",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el7.noarch",
            "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-7.jbcs.el7.x86_64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2020:2644"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el6.noarch",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el7.noarch",
            "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-7.jbcs.el7.x86_64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "libxml2: memory leak in xmlParseBalancedChunkMemoryRecover in parser.c"
    },
    {
      "cve": "CVE-2019-20388",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "discovery_date": "2020-02-06T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1799734"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A memory leak was found in the xmlSchemaValidateStream function of libxml2. Applications that use this library may be vulnerable to memory not being freed leading to a denial of service. System availability is the highest threat from this vulnerability.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "libxml2: memory leak in xmlSchemaPreRun in xmlschemas.c",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el6.noarch",
          "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.x86_64",
          "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el7.noarch",
          "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-7.jbcs.el7.x86_64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-20388"
        },
        {
          "category": "external",
          "summary": "RHBZ#1799734",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1799734"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-20388",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-20388"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-20388",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-20388"
        }
      ],
      "release_date": "2020-01-21T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2020-06-22T12:28:02+00:00",
          "details": "Before applying this update, make sure all previously released errata\nrelevant to your system have been applied.\n\nFor details on how to apply this update, refer to:\n\nhttps://access.redhat.com/articles/11258",
          "product_ids": [
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el6.noarch",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el7.noarch",
            "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-7.jbcs.el7.x86_64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2020:2644"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el6.noarch",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el7.noarch",
            "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-7.jbcs.el7.x86_64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "libxml2: memory leak in xmlSchemaPreRun in xmlschemas.c"
    },
    {
      "cve": "CVE-2020-1934",
      "cwe": {
        "id": "CWE-456",
        "name": "Missing Initialization of a Variable"
      },
      "discovery_date": "2020-04-01T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1820772"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A flaw was found in Apache\u0027s HTTP server (httpd) .The mod_proxy_ftp module may use uninitialized memory with proxying to a malicious FTP server. The highest threat from this vulnerability is to data confidentiality.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "httpd: mod_proxy_ftp use of uninitialized value",
          "title": "Vulnerability summary"
        },
        {
          "category": "other",
          "text": "This flaw is caused by use of an uninitialized memory variable. Practically this has no impact, but in some corner cases it is possible that the contents of this variable could be read by a remote process, causing loss of confidentiality as a result of this. There is no evidence of code execution.",
          "title": "Statement"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el6.noarch",
          "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.x86_64",
          "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el7.noarch",
          "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-7.jbcs.el7.x86_64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2020-1934"
        },
        {
          "category": "external",
          "summary": "RHBZ#1820772",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1820772"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2020-1934",
          "url": "https://www.cve.org/CVERecord?id=CVE-2020-1934"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2020-1934",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2020-1934"
        },
        {
          "category": "external",
          "summary": "https://httpd.apache.org/security/vulnerabilities_24.html",
          "url": "https://httpd.apache.org/security/vulnerabilities_24.html"
        }
      ],
      "release_date": "2020-04-01T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2020-06-22T12:28:02+00:00",
          "details": "Before applying this update, make sure all previously released errata\nrelevant to your system have been applied.\n\nFor details on how to apply this update, refer to:\n\nhttps://access.redhat.com/articles/11258",
          "product_ids": [
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el6.noarch",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el7.noarch",
            "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-7.jbcs.el7.x86_64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2020:2644"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "NETWORK",
            "availabilityImpact": "NONE",
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "confidentialityImpact": "LOW",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el6.noarch",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el7.noarch",
            "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-7.jbcs.el7.x86_64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Low"
        }
      ],
      "title": "httpd: mod_proxy_ftp use of uninitialized value"
    },
    {
      "cve": "CVE-2020-7595",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "discovery_date": "2020-02-06T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1799786"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "xmlStringLenDecodeEntities in parser.c in libxml2 2.9.10 has an infinite loop in a certain end-of-file situation.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "libxml2: infinite loop in xmlStringLenDecodeEntities in some end-of-file situations",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el6.noarch",
          "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.x86_64",
          "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el7.noarch",
          "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-7.jbcs.el7.x86_64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2020-7595"
        },
        {
          "category": "external",
          "summary": "RHBZ#1799786",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1799786"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2020-7595",
          "url": "https://www.cve.org/CVERecord?id=CVE-2020-7595"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2020-7595",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2020-7595"
        }
      ],
      "release_date": "2020-01-21T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2020-06-22T12:28:02+00:00",
          "details": "Before applying this update, make sure all previously released errata\nrelevant to your system have been applied.\n\nFor details on how to apply this update, refer to:\n\nhttps://access.redhat.com/articles/11258",
          "product_ids": [
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el6.noarch",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el7.noarch",
            "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-7.jbcs.el7.x86_64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2020:2644"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el6.noarch",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el7.noarch",
            "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-7.jbcs.el7.x86_64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "libxml2: infinite loop in xmlStringLenDecodeEntities in some end-of-file situations"
    },
    {
      "acknowledgments": [
        {
          "names": [
            "the Envoy security team"
          ]
        }
      ],
      "cve": "CVE-2020-11080",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "discovery_date": "2020-06-08T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1844929"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A resource consumption vulnerability was found in nghttp2. This flaw allows an attacker to repeatedly construct an overly large HTTP/2 SETTINGS frame with a length of 14,400 bytes that causes excessive CPU usage, leading to a denial of service.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "nghttp2: overly large SETTINGS frames can lead to DoS",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el6.noarch",
          "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.src",
          "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.x86_64",
          "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.i686",
          "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.x86_64",
          "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el7.noarch",
          "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.src",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-7.jbcs.el7.x86_64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2020-11080"
        },
        {
          "category": "external",
          "summary": "RHBZ#1844929",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1844929"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2020-11080",
          "url": "https://www.cve.org/CVERecord?id=CVE-2020-11080"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2020-11080",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2020-11080"
        },
        {
          "category": "external",
          "summary": "https://github.com/nghttp2/nghttp2/security/advisories/GHSA-q5wr-xfw9-q7xr",
          "url": "https://github.com/nghttp2/nghttp2/security/advisories/GHSA-q5wr-xfw9-q7xr"
        }
      ],
      "release_date": "2020-06-02T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2020-06-22T12:28:02+00:00",
          "details": "Before applying this update, make sure all previously released errata\nrelevant to your system have been applied.\n\nFor details on how to apply this update, refer to:\n\nhttps://access.redhat.com/articles/11258",
          "product_ids": [
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el6.noarch",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el7.noarch",
            "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-7.jbcs.el7.x86_64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2020:2644"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el6.noarch",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.src",
            "6Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el6.x86_64",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.i686",
            "6Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el6.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-curl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.37-57.jbcs.el7.noarch",
            "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:7.64.1-36.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_cluster-native-debuginfo-0:1.3.14-4.Final_redhat_2.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.7-3.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.48-4.redhat_1.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-manual-0:1.2.48-4.redhat_1.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.0.8-24.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.2-51.GA.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.37-57.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-nghttp2-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-debuginfo-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-nghttp2-devel-0:1.39.2-25.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.src",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-7.jbcs.el7.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-7.jbcs.el7.x86_64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Important"
        }
      ],
      "title": "nghttp2: overly large SETTINGS frames can lead to DoS"
    }
  ]
}

{
  "document": {
    "aggregate_severity": {
      "namespace": "https://access.redhat.com/security/updates/classification/",
      "text": "Moderate"
    },
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Copyright \u00a9 Red Hat, Inc. All rights reserved.",
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "An update for libxml2 is now available for Red Hat Enterprise Linux 8.\n\nRed Hat Product Security has rated this update as having a security impact of Moderate. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.",
        "title": "Topic"
      },
      {
        "category": "general",
        "text": "The libxml2 library is a development toolbox providing the implementation of various XML standards.\n\nSecurity Fix(es):\n\n* libxml2: memory leak in xmlParseBalancedChunkMemoryRecover in parser.c (CVE-2019-19956)\n\n* libxml2: memory leak in xmlSchemaPreRun in xmlschemas.c (CVE-2019-20388)\n\n* libxml2: infinite loop in xmlStringLenDecodeEntities in some end-of-file situations (CVE-2020-7595)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.\n\nAdditional Changes:\n\nFor detailed information on changes in this release, see the Red Hat Enterprise Linux 8.3 Release Notes linked from the References section.",
        "title": "Details"
      },
      {
        "category": "legal_disclaimer",
        "text": "This content is licensed under the Creative Commons Attribution 4.0 International License (https://creativecommons.org/licenses/by/4.0/). If you distribute this content, or a modified version of it, you must provide attribution to Red Hat Inc. and provide a link to the original.",
        "title": "Terms of Use"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "https://access.redhat.com/security/team/contact/",
      "issuing_authority": "Red Hat Product Security is responsible for vulnerability handling across all Red Hat products and services.",
      "name": "Red Hat Product Security",
      "namespace": "https://www.redhat.com"
    },
    "references": [
      {
        "category": "self",
        "summary": "https://access.redhat.com/errata/RHSA-2020:4479",
        "url": "https://access.redhat.com/errata/RHSA-2020:4479"
      },
      {
        "category": "external",
        "summary": "https://access.redhat.com/security/updates/classification/#moderate",
        "url": "https://access.redhat.com/security/updates/classification/#moderate"
      },
      {
        "category": "external",
        "summary": "https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/html/8.3_release_notes/",
        "url": "https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/html/8.3_release_notes/"
      },
      {
        "category": "external",
        "summary": "1788856",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1788856"
      },
      {
        "category": "external",
        "summary": "1799734",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1799734"
      },
      {
        "category": "external",
        "summary": "1799786",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1799786"
      },
      {
        "category": "self",
        "summary": "Canonical URL",
        "url": "https://security.access.redhat.com/data/csaf/v2/advisories/2020/rhsa-2020_4479.json"
      }
    ],
    "title": "Red Hat Security Advisory: libxml2 security update",
    "tracking": {
      "current_release_date": "2024-11-05T22:53:44+00:00",
      "generator": {
        "date": "2024-11-05T22:53:44+00:00",
        "engine": {
          "name": "Red Hat SDEngine",
          "version": "4.1.1"
        }
      },
      "id": "RHSA-2020:4479",
      "initial_release_date": "2020-11-04T02:12:23+00:00",
      "revision_history": [
        {
          "date": "2020-11-04T02:12:23+00:00",
          "number": "1",
          "summary": "Initial version"
        },
        {
          "date": "2020-11-04T02:12:23+00:00",
          "number": "2",
          "summary": "Last updated version"
        },
        {
          "date": "2024-11-05T22:53:44+00:00",
          "number": "3",
          "summary": "Last generated version"
        }
      ],
      "status": "final",
      "version": "3"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_name",
                "name": "Red Hat Enterprise Linux AppStream (v. 8)",
                "product": {
                  "name": "Red Hat Enterprise Linux AppStream (v. 8)",
                  "product_id": "AppStream-8.3.0.GA",
                  "product_identification_helper": {
                    "cpe": "cpe:/a:redhat:enterprise_linux:8::appstream"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "Red Hat Enterprise Linux BaseOS (v. 8)",
                "product": {
                  "name": "Red Hat Enterprise Linux BaseOS (v. 8)",
                  "product_id": "BaseOS-8.3.0.GA",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:redhat:enterprise_linux:8::baseos"
                  }
                }
              }
            ],
            "category": "product_family",
            "name": "Red Hat Enterprise Linux"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libxml2-0:2.9.7-8.el8.i686",
                "product": {
                  "name": "libxml2-0:2.9.7-8.el8.i686",
                  "product_id": "libxml2-0:2.9.7-8.el8.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2@2.9.7-8.el8?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-debugsource-0:2.9.7-8.el8.i686",
                "product": {
                  "name": "libxml2-debugsource-0:2.9.7-8.el8.i686",
                  "product_id": "libxml2-debugsource-0:2.9.7-8.el8.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-debugsource@2.9.7-8.el8?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-debuginfo-0:2.9.7-8.el8.i686",
                "product": {
                  "name": "libxml2-debuginfo-0:2.9.7-8.el8.i686",
                  "product_id": "libxml2-debuginfo-0:2.9.7-8.el8.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-debuginfo@2.9.7-8.el8?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "python3-libxml2-debuginfo-0:2.9.7-8.el8.i686",
                "product": {
                  "name": "python3-libxml2-debuginfo-0:2.9.7-8.el8.i686",
                  "product_id": "python3-libxml2-debuginfo-0:2.9.7-8.el8.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/python3-libxml2-debuginfo@2.9.7-8.el8?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-devel-0:2.9.7-8.el8.i686",
                "product": {
                  "name": "libxml2-devel-0:2.9.7-8.el8.i686",
                  "product_id": "libxml2-devel-0:2.9.7-8.el8.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-devel@2.9.7-8.el8?arch=i686"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "i686"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libxml2-0:2.9.7-8.el8.x86_64",
                "product": {
                  "name": "libxml2-0:2.9.7-8.el8.x86_64",
                  "product_id": "libxml2-0:2.9.7-8.el8.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2@2.9.7-8.el8?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "python3-libxml2-0:2.9.7-8.el8.x86_64",
                "product": {
                  "name": "python3-libxml2-0:2.9.7-8.el8.x86_64",
                  "product_id": "python3-libxml2-0:2.9.7-8.el8.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/python3-libxml2@2.9.7-8.el8?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-debugsource-0:2.9.7-8.el8.x86_64",
                "product": {
                  "name": "libxml2-debugsource-0:2.9.7-8.el8.x86_64",
                  "product_id": "libxml2-debugsource-0:2.9.7-8.el8.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-debugsource@2.9.7-8.el8?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
                "product": {
                  "name": "libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
                  "product_id": "libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-debuginfo@2.9.7-8.el8?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "python3-libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
                "product": {
                  "name": "python3-libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
                  "product_id": "python3-libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/python3-libxml2-debuginfo@2.9.7-8.el8?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-devel-0:2.9.7-8.el8.x86_64",
                "product": {
                  "name": "libxml2-devel-0:2.9.7-8.el8.x86_64",
                  "product_id": "libxml2-devel-0:2.9.7-8.el8.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-devel@2.9.7-8.el8?arch=x86_64"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "x86_64"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libxml2-0:2.9.7-8.el8.ppc64le",
                "product": {
                  "name": "libxml2-0:2.9.7-8.el8.ppc64le",
                  "product_id": "libxml2-0:2.9.7-8.el8.ppc64le",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2@2.9.7-8.el8?arch=ppc64le"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "python3-libxml2-0:2.9.7-8.el8.ppc64le",
                "product": {
                  "name": "python3-libxml2-0:2.9.7-8.el8.ppc64le",
                  "product_id": "python3-libxml2-0:2.9.7-8.el8.ppc64le",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/python3-libxml2@2.9.7-8.el8?arch=ppc64le"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-debugsource-0:2.9.7-8.el8.ppc64le",
                "product": {
                  "name": "libxml2-debugsource-0:2.9.7-8.el8.ppc64le",
                  "product_id": "libxml2-debugsource-0:2.9.7-8.el8.ppc64le",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-debugsource@2.9.7-8.el8?arch=ppc64le"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
                "product": {
                  "name": "libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
                  "product_id": "libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-debuginfo@2.9.7-8.el8?arch=ppc64le"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "python3-libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
                "product": {
                  "name": "python3-libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
                  "product_id": "python3-libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/python3-libxml2-debuginfo@2.9.7-8.el8?arch=ppc64le"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-devel-0:2.9.7-8.el8.ppc64le",
                "product": {
                  "name": "libxml2-devel-0:2.9.7-8.el8.ppc64le",
                  "product_id": "libxml2-devel-0:2.9.7-8.el8.ppc64le",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-devel@2.9.7-8.el8?arch=ppc64le"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "ppc64le"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libxml2-0:2.9.7-8.el8.s390x",
                "product": {
                  "name": "libxml2-0:2.9.7-8.el8.s390x",
                  "product_id": "libxml2-0:2.9.7-8.el8.s390x",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2@2.9.7-8.el8?arch=s390x"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "python3-libxml2-0:2.9.7-8.el8.s390x",
                "product": {
                  "name": "python3-libxml2-0:2.9.7-8.el8.s390x",
                  "product_id": "python3-libxml2-0:2.9.7-8.el8.s390x",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/python3-libxml2@2.9.7-8.el8?arch=s390x"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-debugsource-0:2.9.7-8.el8.s390x",
                "product": {
                  "name": "libxml2-debugsource-0:2.9.7-8.el8.s390x",
                  "product_id": "libxml2-debugsource-0:2.9.7-8.el8.s390x",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-debugsource@2.9.7-8.el8?arch=s390x"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-debuginfo-0:2.9.7-8.el8.s390x",
                "product": {
                  "name": "libxml2-debuginfo-0:2.9.7-8.el8.s390x",
                  "product_id": "libxml2-debuginfo-0:2.9.7-8.el8.s390x",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-debuginfo@2.9.7-8.el8?arch=s390x"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "python3-libxml2-debuginfo-0:2.9.7-8.el8.s390x",
                "product": {
                  "name": "python3-libxml2-debuginfo-0:2.9.7-8.el8.s390x",
                  "product_id": "python3-libxml2-debuginfo-0:2.9.7-8.el8.s390x",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/python3-libxml2-debuginfo@2.9.7-8.el8?arch=s390x"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-devel-0:2.9.7-8.el8.s390x",
                "product": {
                  "name": "libxml2-devel-0:2.9.7-8.el8.s390x",
                  "product_id": "libxml2-devel-0:2.9.7-8.el8.s390x",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-devel@2.9.7-8.el8?arch=s390x"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "s390x"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libxml2-0:2.9.7-8.el8.aarch64",
                "product": {
                  "name": "libxml2-0:2.9.7-8.el8.aarch64",
                  "product_id": "libxml2-0:2.9.7-8.el8.aarch64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2@2.9.7-8.el8?arch=aarch64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "python3-libxml2-0:2.9.7-8.el8.aarch64",
                "product": {
                  "name": "python3-libxml2-0:2.9.7-8.el8.aarch64",
                  "product_id": "python3-libxml2-0:2.9.7-8.el8.aarch64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/python3-libxml2@2.9.7-8.el8?arch=aarch64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-debugsource-0:2.9.7-8.el8.aarch64",
                "product": {
                  "name": "libxml2-debugsource-0:2.9.7-8.el8.aarch64",
                  "product_id": "libxml2-debugsource-0:2.9.7-8.el8.aarch64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-debugsource@2.9.7-8.el8?arch=aarch64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
                "product": {
                  "name": "libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
                  "product_id": "libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-debuginfo@2.9.7-8.el8?arch=aarch64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "python3-libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
                "product": {
                  "name": "python3-libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
                  "product_id": "python3-libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/python3-libxml2-debuginfo@2.9.7-8.el8?arch=aarch64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-devel-0:2.9.7-8.el8.aarch64",
                "product": {
                  "name": "libxml2-devel-0:2.9.7-8.el8.aarch64",
                  "product_id": "libxml2-devel-0:2.9.7-8.el8.aarch64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-devel@2.9.7-8.el8?arch=aarch64"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "aarch64"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libxml2-0:2.9.7-8.el8.src",
                "product": {
                  "name": "libxml2-0:2.9.7-8.el8.src",
                  "product_id": "libxml2-0:2.9.7-8.el8.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2@2.9.7-8.el8?arch=src"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "src"
          }
        ],
        "category": "vendor",
        "name": "Red Hat"
      }
    ],
    "relationships": [
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.7-8.el8.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.aarch64"
        },
        "product_reference": "libxml2-0:2.9.7-8.el8.aarch64",
        "relates_to_product_reference": "AppStream-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.7-8.el8.i686 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.i686"
        },
        "product_reference": "libxml2-0:2.9.7-8.el8.i686",
        "relates_to_product_reference": "AppStream-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.7-8.el8.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.ppc64le"
        },
        "product_reference": "libxml2-0:2.9.7-8.el8.ppc64le",
        "relates_to_product_reference": "AppStream-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.7-8.el8.s390x as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.s390x"
        },
        "product_reference": "libxml2-0:2.9.7-8.el8.s390x",
        "relates_to_product_reference": "AppStream-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.7-8.el8.src as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.src"
        },
        "product_reference": "libxml2-0:2.9.7-8.el8.src",
        "relates_to_product_reference": "AppStream-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.7-8.el8.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.x86_64"
        },
        "product_reference": "libxml2-0:2.9.7-8.el8.x86_64",
        "relates_to_product_reference": "AppStream-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.7-8.el8.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.aarch64"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
        "relates_to_product_reference": "AppStream-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.7-8.el8.i686 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.i686"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.7-8.el8.i686",
        "relates_to_product_reference": "AppStream-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.7-8.el8.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.ppc64le"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
        "relates_to_product_reference": "AppStream-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.7-8.el8.s390x as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.s390x"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.7-8.el8.s390x",
        "relates_to_product_reference": "AppStream-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.7-8.el8.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.x86_64"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
        "relates_to_product_reference": "AppStream-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debugsource-0:2.9.7-8.el8.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.aarch64"
        },
        "product_reference": "libxml2-debugsource-0:2.9.7-8.el8.aarch64",
        "relates_to_product_reference": "AppStream-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debugsource-0:2.9.7-8.el8.i686 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.i686"
        },
        "product_reference": "libxml2-debugsource-0:2.9.7-8.el8.i686",
        "relates_to_product_reference": "AppStream-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debugsource-0:2.9.7-8.el8.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.ppc64le"
        },
        "product_reference": "libxml2-debugsource-0:2.9.7-8.el8.ppc64le",
        "relates_to_product_reference": "AppStream-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debugsource-0:2.9.7-8.el8.s390x as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.s390x"
        },
        "product_reference": "libxml2-debugsource-0:2.9.7-8.el8.s390x",
        "relates_to_product_reference": "AppStream-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debugsource-0:2.9.7-8.el8.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.x86_64"
        },
        "product_reference": "libxml2-debugsource-0:2.9.7-8.el8.x86_64",
        "relates_to_product_reference": "AppStream-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.7-8.el8.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.aarch64"
        },
        "product_reference": "libxml2-devel-0:2.9.7-8.el8.aarch64",
        "relates_to_product_reference": "AppStream-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.7-8.el8.i686 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.i686"
        },
        "product_reference": "libxml2-devel-0:2.9.7-8.el8.i686",
        "relates_to_product_reference": "AppStream-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.7-8.el8.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.ppc64le"
        },
        "product_reference": "libxml2-devel-0:2.9.7-8.el8.ppc64le",
        "relates_to_product_reference": "AppStream-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.7-8.el8.s390x as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.s390x"
        },
        "product_reference": "libxml2-devel-0:2.9.7-8.el8.s390x",
        "relates_to_product_reference": "AppStream-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.7-8.el8.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.x86_64"
        },
        "product_reference": "libxml2-devel-0:2.9.7-8.el8.x86_64",
        "relates_to_product_reference": "AppStream-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "python3-libxml2-0:2.9.7-8.el8.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.aarch64"
        },
        "product_reference": "python3-libxml2-0:2.9.7-8.el8.aarch64",
        "relates_to_product_reference": "AppStream-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "python3-libxml2-0:2.9.7-8.el8.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.ppc64le"
        },
        "product_reference": "python3-libxml2-0:2.9.7-8.el8.ppc64le",
        "relates_to_product_reference": "AppStream-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "python3-libxml2-0:2.9.7-8.el8.s390x as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.s390x"
        },
        "product_reference": "python3-libxml2-0:2.9.7-8.el8.s390x",
        "relates_to_product_reference": "AppStream-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "python3-libxml2-0:2.9.7-8.el8.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.x86_64"
        },
        "product_reference": "python3-libxml2-0:2.9.7-8.el8.x86_64",
        "relates_to_product_reference": "AppStream-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "python3-libxml2-debuginfo-0:2.9.7-8.el8.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.aarch64"
        },
        "product_reference": "python3-libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
        "relates_to_product_reference": "AppStream-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "python3-libxml2-debuginfo-0:2.9.7-8.el8.i686 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.i686"
        },
        "product_reference": "python3-libxml2-debuginfo-0:2.9.7-8.el8.i686",
        "relates_to_product_reference": "AppStream-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "python3-libxml2-debuginfo-0:2.9.7-8.el8.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.ppc64le"
        },
        "product_reference": "python3-libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
        "relates_to_product_reference": "AppStream-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "python3-libxml2-debuginfo-0:2.9.7-8.el8.s390x as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.s390x"
        },
        "product_reference": "python3-libxml2-debuginfo-0:2.9.7-8.el8.s390x",
        "relates_to_product_reference": "AppStream-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "python3-libxml2-debuginfo-0:2.9.7-8.el8.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.x86_64"
        },
        "product_reference": "python3-libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
        "relates_to_product_reference": "AppStream-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.7-8.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.aarch64"
        },
        "product_reference": "libxml2-0:2.9.7-8.el8.aarch64",
        "relates_to_product_reference": "BaseOS-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.7-8.el8.i686 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.i686"
        },
        "product_reference": "libxml2-0:2.9.7-8.el8.i686",
        "relates_to_product_reference": "BaseOS-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.7-8.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.ppc64le"
        },
        "product_reference": "libxml2-0:2.9.7-8.el8.ppc64le",
        "relates_to_product_reference": "BaseOS-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.7-8.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.s390x"
        },
        "product_reference": "libxml2-0:2.9.7-8.el8.s390x",
        "relates_to_product_reference": "BaseOS-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.7-8.el8.src as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.src"
        },
        "product_reference": "libxml2-0:2.9.7-8.el8.src",
        "relates_to_product_reference": "BaseOS-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.7-8.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.x86_64"
        },
        "product_reference": "libxml2-0:2.9.7-8.el8.x86_64",
        "relates_to_product_reference": "BaseOS-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.7-8.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.aarch64"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
        "relates_to_product_reference": "BaseOS-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.7-8.el8.i686 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.i686"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.7-8.el8.i686",
        "relates_to_product_reference": "BaseOS-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.7-8.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.ppc64le"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
        "relates_to_product_reference": "BaseOS-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.7-8.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.s390x"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.7-8.el8.s390x",
        "relates_to_product_reference": "BaseOS-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.7-8.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.x86_64"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
        "relates_to_product_reference": "BaseOS-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debugsource-0:2.9.7-8.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.aarch64"
        },
        "product_reference": "libxml2-debugsource-0:2.9.7-8.el8.aarch64",
        "relates_to_product_reference": "BaseOS-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debugsource-0:2.9.7-8.el8.i686 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.i686"
        },
        "product_reference": "libxml2-debugsource-0:2.9.7-8.el8.i686",
        "relates_to_product_reference": "BaseOS-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debugsource-0:2.9.7-8.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.ppc64le"
        },
        "product_reference": "libxml2-debugsource-0:2.9.7-8.el8.ppc64le",
        "relates_to_product_reference": "BaseOS-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debugsource-0:2.9.7-8.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.s390x"
        },
        "product_reference": "libxml2-debugsource-0:2.9.7-8.el8.s390x",
        "relates_to_product_reference": "BaseOS-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debugsource-0:2.9.7-8.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.x86_64"
        },
        "product_reference": "libxml2-debugsource-0:2.9.7-8.el8.x86_64",
        "relates_to_product_reference": "BaseOS-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.7-8.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.aarch64"
        },
        "product_reference": "libxml2-devel-0:2.9.7-8.el8.aarch64",
        "relates_to_product_reference": "BaseOS-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.7-8.el8.i686 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.i686"
        },
        "product_reference": "libxml2-devel-0:2.9.7-8.el8.i686",
        "relates_to_product_reference": "BaseOS-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.7-8.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.ppc64le"
        },
        "product_reference": "libxml2-devel-0:2.9.7-8.el8.ppc64le",
        "relates_to_product_reference": "BaseOS-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.7-8.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.s390x"
        },
        "product_reference": "libxml2-devel-0:2.9.7-8.el8.s390x",
        "relates_to_product_reference": "BaseOS-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.7-8.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.x86_64"
        },
        "product_reference": "libxml2-devel-0:2.9.7-8.el8.x86_64",
        "relates_to_product_reference": "BaseOS-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "python3-libxml2-0:2.9.7-8.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.aarch64"
        },
        "product_reference": "python3-libxml2-0:2.9.7-8.el8.aarch64",
        "relates_to_product_reference": "BaseOS-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "python3-libxml2-0:2.9.7-8.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.ppc64le"
        },
        "product_reference": "python3-libxml2-0:2.9.7-8.el8.ppc64le",
        "relates_to_product_reference": "BaseOS-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "python3-libxml2-0:2.9.7-8.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.s390x"
        },
        "product_reference": "python3-libxml2-0:2.9.7-8.el8.s390x",
        "relates_to_product_reference": "BaseOS-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "python3-libxml2-0:2.9.7-8.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.x86_64"
        },
        "product_reference": "python3-libxml2-0:2.9.7-8.el8.x86_64",
        "relates_to_product_reference": "BaseOS-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "python3-libxml2-debuginfo-0:2.9.7-8.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.aarch64"
        },
        "product_reference": "python3-libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
        "relates_to_product_reference": "BaseOS-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "python3-libxml2-debuginfo-0:2.9.7-8.el8.i686 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.i686"
        },
        "product_reference": "python3-libxml2-debuginfo-0:2.9.7-8.el8.i686",
        "relates_to_product_reference": "BaseOS-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "python3-libxml2-debuginfo-0:2.9.7-8.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.ppc64le"
        },
        "product_reference": "python3-libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
        "relates_to_product_reference": "BaseOS-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "python3-libxml2-debuginfo-0:2.9.7-8.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.s390x"
        },
        "product_reference": "python3-libxml2-debuginfo-0:2.9.7-8.el8.s390x",
        "relates_to_product_reference": "BaseOS-8.3.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "python3-libxml2-debuginfo-0:2.9.7-8.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.x86_64"
        },
        "product_reference": "python3-libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
        "relates_to_product_reference": "BaseOS-8.3.0.GA"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2019-19956",
      "cwe": {
        "id": "CWE-772",
        "name": "Missing Release of Resource after Effective Lifetime"
      },
      "discovery_date": "2020-01-08T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1788856"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "xmlParseBalancedChunkMemoryRecover in parser.c in libxml2 before 2.9.10 has a memory leak related to newDoc-\u003eoldNs.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "libxml2: memory leak in xmlParseBalancedChunkMemoryRecover in parser.c",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.aarch64",
          "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.i686",
          "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.ppc64le",
          "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.s390x",
          "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.src",
          "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.x86_64",
          "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
          "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.i686",
          "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
          "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.s390x",
          "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
          "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.aarch64",
          "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.i686",
          "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.ppc64le",
          "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.s390x",
          "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.x86_64",
          "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.aarch64",
          "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.i686",
          "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.ppc64le",
          "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.s390x",
          "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.x86_64",
          "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.aarch64",
          "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.ppc64le",
          "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.s390x",
          "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.x86_64",
          "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
          "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.i686",
          "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
          "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.s390x",
          "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
          "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.aarch64",
          "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.i686",
          "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.ppc64le",
          "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.s390x",
          "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.src",
          "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.x86_64",
          "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
          "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.i686",
          "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
          "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.s390x",
          "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
          "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.aarch64",
          "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.i686",
          "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.ppc64le",
          "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.s390x",
          "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.x86_64",
          "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.aarch64",
          "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.i686",
          "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.ppc64le",
          "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.s390x",
          "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.x86_64",
          "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.aarch64",
          "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.ppc64le",
          "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.s390x",
          "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.x86_64",
          "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
          "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.i686",
          "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
          "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.s390x",
          "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.x86_64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-19956"
        },
        {
          "category": "external",
          "summary": "RHBZ#1788856",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1788856"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-19956",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-19956"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-19956",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-19956"
        }
      ],
      "release_date": "2020-01-08T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2020-11-04T02:12:23+00:00",
          "details": "For details on how to apply this update, which includes the changes described in this advisory, refer to:\n\nhttps://access.redhat.com/articles/11258\n\nThe desktop must be restarted (log out, then log back in) for this update to take effect.",
          "product_ids": [
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.i686",
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.src",
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.x86_64",
            "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.i686",
            "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
            "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.i686",
            "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.x86_64",
            "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.i686",
            "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.x86_64",
            "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.x86_64",
            "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.i686",
            "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.i686",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.src",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.i686",
            "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.i686",
            "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.i686",
            "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.i686",
            "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.x86_64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2020:4479"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.i686",
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.src",
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.x86_64",
            "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.i686",
            "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
            "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.i686",
            "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.x86_64",
            "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.i686",
            "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.x86_64",
            "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.x86_64",
            "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.i686",
            "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.i686",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.src",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.i686",
            "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.i686",
            "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.i686",
            "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.i686",
            "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.x86_64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "libxml2: memory leak in xmlParseBalancedChunkMemoryRecover in parser.c"
    },
    {
      "cve": "CVE-2019-20388",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "discovery_date": "2020-02-06T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1799734"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A memory leak was found in the xmlSchemaValidateStream function of libxml2. Applications that use this library may be vulnerable to memory not being freed leading to a denial of service. System availability is the highest threat from this vulnerability.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "libxml2: memory leak in xmlSchemaPreRun in xmlschemas.c",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.aarch64",
          "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.i686",
          "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.ppc64le",
          "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.s390x",
          "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.src",
          "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.x86_64",
          "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
          "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.i686",
          "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
          "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.s390x",
          "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
          "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.aarch64",
          "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.i686",
          "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.ppc64le",
          "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.s390x",
          "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.x86_64",
          "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.aarch64",
          "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.i686",
          "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.ppc64le",
          "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.s390x",
          "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.x86_64",
          "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.aarch64",
          "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.ppc64le",
          "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.s390x",
          "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.x86_64",
          "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
          "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.i686",
          "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
          "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.s390x",
          "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
          "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.aarch64",
          "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.i686",
          "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.ppc64le",
          "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.s390x",
          "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.src",
          "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.x86_64",
          "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
          "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.i686",
          "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
          "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.s390x",
          "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
          "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.aarch64",
          "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.i686",
          "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.ppc64le",
          "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.s390x",
          "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.x86_64",
          "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.aarch64",
          "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.i686",
          "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.ppc64le",
          "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.s390x",
          "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.x86_64",
          "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.aarch64",
          "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.ppc64le",
          "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.s390x",
          "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.x86_64",
          "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
          "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.i686",
          "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
          "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.s390x",
          "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.x86_64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-20388"
        },
        {
          "category": "external",
          "summary": "RHBZ#1799734",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1799734"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-20388",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-20388"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-20388",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-20388"
        }
      ],
      "release_date": "2020-01-21T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2020-11-04T02:12:23+00:00",
          "details": "For details on how to apply this update, which includes the changes described in this advisory, refer to:\n\nhttps://access.redhat.com/articles/11258\n\nThe desktop must be restarted (log out, then log back in) for this update to take effect.",
          "product_ids": [
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.i686",
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.src",
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.x86_64",
            "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.i686",
            "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
            "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.i686",
            "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.x86_64",
            "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.i686",
            "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.x86_64",
            "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.x86_64",
            "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.i686",
            "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.i686",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.src",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.i686",
            "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.i686",
            "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.i686",
            "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.i686",
            "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.x86_64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2020:4479"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.i686",
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.src",
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.x86_64",
            "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.i686",
            "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
            "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.i686",
            "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.x86_64",
            "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.i686",
            "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.x86_64",
            "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.x86_64",
            "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.i686",
            "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.i686",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.src",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.i686",
            "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.i686",
            "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.i686",
            "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.i686",
            "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.x86_64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "libxml2: memory leak in xmlSchemaPreRun in xmlschemas.c"
    },
    {
      "cve": "CVE-2020-7595",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "discovery_date": "2020-02-06T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1799786"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "xmlStringLenDecodeEntities in parser.c in libxml2 2.9.10 has an infinite loop in a certain end-of-file situation.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "libxml2: infinite loop in xmlStringLenDecodeEntities in some end-of-file situations",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.aarch64",
          "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.i686",
          "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.ppc64le",
          "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.s390x",
          "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.src",
          "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.x86_64",
          "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
          "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.i686",
          "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
          "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.s390x",
          "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
          "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.aarch64",
          "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.i686",
          "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.ppc64le",
          "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.s390x",
          "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.x86_64",
          "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.aarch64",
          "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.i686",
          "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.ppc64le",
          "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.s390x",
          "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.x86_64",
          "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.aarch64",
          "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.ppc64le",
          "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.s390x",
          "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.x86_64",
          "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
          "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.i686",
          "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
          "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.s390x",
          "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
          "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.aarch64",
          "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.i686",
          "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.ppc64le",
          "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.s390x",
          "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.src",
          "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.x86_64",
          "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
          "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.i686",
          "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
          "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.s390x",
          "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
          "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.aarch64",
          "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.i686",
          "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.ppc64le",
          "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.s390x",
          "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.x86_64",
          "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.aarch64",
          "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.i686",
          "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.ppc64le",
          "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.s390x",
          "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.x86_64",
          "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.aarch64",
          "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.ppc64le",
          "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.s390x",
          "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.x86_64",
          "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
          "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.i686",
          "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
          "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.s390x",
          "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.x86_64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2020-7595"
        },
        {
          "category": "external",
          "summary": "RHBZ#1799786",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1799786"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2020-7595",
          "url": "https://www.cve.org/CVERecord?id=CVE-2020-7595"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2020-7595",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2020-7595"
        }
      ],
      "release_date": "2020-01-21T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2020-11-04T02:12:23+00:00",
          "details": "For details on how to apply this update, which includes the changes described in this advisory, refer to:\n\nhttps://access.redhat.com/articles/11258\n\nThe desktop must be restarted (log out, then log back in) for this update to take effect.",
          "product_ids": [
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.i686",
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.src",
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.x86_64",
            "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.i686",
            "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
            "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.i686",
            "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.x86_64",
            "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.i686",
            "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.x86_64",
            "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.x86_64",
            "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.i686",
            "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.i686",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.src",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.i686",
            "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.i686",
            "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.i686",
            "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.i686",
            "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.x86_64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2020:4479"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.i686",
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.src",
            "AppStream-8.3.0.GA:libxml2-0:2.9.7-8.el8.x86_64",
            "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.i686",
            "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
            "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.i686",
            "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.x86_64",
            "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.i686",
            "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.x86_64",
            "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.x86_64",
            "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
            "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.i686",
            "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
            "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.s390x",
            "AppStream-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.i686",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.src",
            "BaseOS-8.3.0.GA:libxml2-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.i686",
            "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:libxml2-debuginfo-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.i686",
            "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:libxml2-debugsource-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.i686",
            "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:libxml2-devel-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:python3-libxml2-0:2.9.7-8.el8.x86_64",
            "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.aarch64",
            "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.i686",
            "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.ppc64le",
            "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.s390x",
            "BaseOS-8.3.0.GA:python3-libxml2-debuginfo-0:2.9.7-8.el8.x86_64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "libxml2: infinite loop in xmlStringLenDecodeEntities in some end-of-file situations"
    }
  ]
}

{
  "document": {
    "aggregate_severity": {
      "namespace": "https://access.redhat.com/security/updates/classification/",
      "text": "Moderate"
    },
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Copyright \u00a9 Red Hat, Inc. All rights reserved.",
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "An update for libxml2 is now available for Red Hat Enterprise Linux 7.\n\nRed Hat Product Security has rated this update as having a security impact of Moderate. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.",
        "title": "Topic"
      },
      {
        "category": "general",
        "text": "The libxml2 library is a development toolbox providing the implementation of various XML standards.\n\nSecurity Fix(es):\n\n* libxml2: memory leak in xmlParseBalancedChunkMemoryRecover in parser.c (CVE-2019-19956)\n\n* libxml2: memory leak in xmlSchemaPreRun in xmlschemas.c (CVE-2019-20388)\n\n* libxml2: infinite loop in xmlStringLenDecodeEntities in some end-of-file situations (CVE-2020-7595)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.\n\nAdditional Changes:\n\nFor detailed information on changes in this release, see the Red Hat Enterprise Linux 7.9 Release Notes linked from the References section.",
        "title": "Details"
      },
      {
        "category": "legal_disclaimer",
        "text": "This content is licensed under the Creative Commons Attribution 4.0 International License (https://creativecommons.org/licenses/by/4.0/). If you distribute this content, or a modified version of it, you must provide attribution to Red Hat Inc. and provide a link to the original.",
        "title": "Terms of Use"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "https://access.redhat.com/security/team/contact/",
      "issuing_authority": "Red Hat Product Security is responsible for vulnerability handling across all Red Hat products and services.",
      "name": "Red Hat Product Security",
      "namespace": "https://www.redhat.com"
    },
    "references": [
      {
        "category": "self",
        "summary": "https://access.redhat.com/errata/RHSA-2020:3996",
        "url": "https://access.redhat.com/errata/RHSA-2020:3996"
      },
      {
        "category": "external",
        "summary": "https://access.redhat.com/security/updates/classification/#moderate",
        "url": "https://access.redhat.com/security/updates/classification/#moderate"
      },
      {
        "category": "external",
        "summary": "https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/7.9_release_notes/index",
        "url": "https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/7.9_release_notes/index"
      },
      {
        "category": "external",
        "summary": "1788856",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1788856"
      },
      {
        "category": "external",
        "summary": "1799734",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1799734"
      },
      {
        "category": "external",
        "summary": "1799786",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1799786"
      },
      {
        "category": "external",
        "summary": "1812145",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1812145"
      },
      {
        "category": "self",
        "summary": "Canonical URL",
        "url": "https://security.access.redhat.com/data/csaf/v2/advisories/2020/rhsa-2020_3996.json"
      }
    ],
    "title": "Red Hat Security Advisory: libxml2 security and bug fix update",
    "tracking": {
      "current_release_date": "2024-11-05T22:45:19+00:00",
      "generator": {
        "date": "2024-11-05T22:45:19+00:00",
        "engine": {
          "name": "Red Hat SDEngine",
          "version": "4.1.1"
        }
      },
      "id": "RHSA-2020:3996",
      "initial_release_date": "2020-09-29T19:48:02+00:00",
      "revision_history": [
        {
          "date": "2020-09-29T19:48:02+00:00",
          "number": "1",
          "summary": "Initial version"
        },
        {
          "date": "2020-09-29T19:48:02+00:00",
          "number": "2",
          "summary": "Last updated version"
        },
        {
          "date": "2024-11-05T22:45:19+00:00",
          "number": "3",
          "summary": "Last generated version"
        }
      ],
      "status": "final",
      "version": "3"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_name",
                "name": "Red Hat Enterprise Linux Client (v. 7)",
                "product": {
                  "name": "Red Hat Enterprise Linux Client (v. 7)",
                  "product_id": "7Client-7.9",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:redhat:enterprise_linux:7::client"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "Red Hat Enterprise Linux Client Optional (v. 7)",
                "product": {
                  "name": "Red Hat Enterprise Linux Client Optional (v. 7)",
                  "product_id": "7Client-optional-7.9",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:redhat:enterprise_linux:7::client"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "Red Hat Enterprise Linux ComputeNode (v. 7)",
                "product": {
                  "name": "Red Hat Enterprise Linux ComputeNode (v. 7)",
                  "product_id": "7ComputeNode-7.9",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:redhat:enterprise_linux:7::computenode"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
                "product": {
                  "name": "Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
                  "product_id": "7ComputeNode-optional-7.9",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:redhat:enterprise_linux:7::computenode"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "Red Hat Enterprise Linux Server (v. 7)",
                "product": {
                  "name": "Red Hat Enterprise Linux Server (v. 7)",
                  "product_id": "7Server-7.9",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:redhat:enterprise_linux:7::server"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "Red Hat Enterprise Linux Server Optional (v. 7)",
                "product": {
                  "name": "Red Hat Enterprise Linux Server Optional (v. 7)",
                  "product_id": "7Server-optional-7.9",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:redhat:enterprise_linux:7::server"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "Red Hat Enterprise Linux Workstation (v. 7)",
                "product": {
                  "name": "Red Hat Enterprise Linux Workstation (v. 7)",
                  "product_id": "7Workstation-7.9",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:redhat:enterprise_linux:7::workstation"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "Red Hat Enterprise Linux Workstation Optional (v. 7)",
                "product": {
                  "name": "Red Hat Enterprise Linux Workstation Optional (v. 7)",
                  "product_id": "7Workstation-optional-7.9",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:redhat:enterprise_linux:7::workstation"
                  }
                }
              }
            ],
            "category": "product_family",
            "name": "Red Hat Enterprise Linux"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libxml2-0:2.9.1-6.el7.5.i686",
                "product": {
                  "name": "libxml2-0:2.9.1-6.el7.5.i686",
                  "product_id": "libxml2-0:2.9.1-6.el7.5.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2@2.9.1-6.el7.5?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
                "product": {
                  "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
                  "product_id": "libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-debuginfo@2.9.1-6.el7.5?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-devel-0:2.9.1-6.el7.5.i686",
                "product": {
                  "name": "libxml2-devel-0:2.9.1-6.el7.5.i686",
                  "product_id": "libxml2-devel-0:2.9.1-6.el7.5.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-devel@2.9.1-6.el7.5?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-static-0:2.9.1-6.el7.5.i686",
                "product": {
                  "name": "libxml2-static-0:2.9.1-6.el7.5.i686",
                  "product_id": "libxml2-static-0:2.9.1-6.el7.5.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-static@2.9.1-6.el7.5?arch=i686"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "i686"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libxml2-0:2.9.1-6.el7.5.x86_64",
                "product": {
                  "name": "libxml2-0:2.9.1-6.el7.5.x86_64",
                  "product_id": "libxml2-0:2.9.1-6.el7.5.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2@2.9.1-6.el7.5?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-python-0:2.9.1-6.el7.5.x86_64",
                "product": {
                  "name": "libxml2-python-0:2.9.1-6.el7.5.x86_64",
                  "product_id": "libxml2-python-0:2.9.1-6.el7.5.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-python@2.9.1-6.el7.5?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
                "product": {
                  "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
                  "product_id": "libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-debuginfo@2.9.1-6.el7.5?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-devel-0:2.9.1-6.el7.5.x86_64",
                "product": {
                  "name": "libxml2-devel-0:2.9.1-6.el7.5.x86_64",
                  "product_id": "libxml2-devel-0:2.9.1-6.el7.5.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-devel@2.9.1-6.el7.5?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-static-0:2.9.1-6.el7.5.x86_64",
                "product": {
                  "name": "libxml2-static-0:2.9.1-6.el7.5.x86_64",
                  "product_id": "libxml2-static-0:2.9.1-6.el7.5.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-static@2.9.1-6.el7.5?arch=x86_64"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "x86_64"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libxml2-0:2.9.1-6.el7.5.src",
                "product": {
                  "name": "libxml2-0:2.9.1-6.el7.5.src",
                  "product_id": "libxml2-0:2.9.1-6.el7.5.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2@2.9.1-6.el7.5?arch=src"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "src"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libxml2-0:2.9.1-6.el7.5.s390x",
                "product": {
                  "name": "libxml2-0:2.9.1-6.el7.5.s390x",
                  "product_id": "libxml2-0:2.9.1-6.el7.5.s390x",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2@2.9.1-6.el7.5?arch=s390x"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-devel-0:2.9.1-6.el7.5.s390x",
                "product": {
                  "name": "libxml2-devel-0:2.9.1-6.el7.5.s390x",
                  "product_id": "libxml2-devel-0:2.9.1-6.el7.5.s390x",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-devel@2.9.1-6.el7.5?arch=s390x"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-python-0:2.9.1-6.el7.5.s390x",
                "product": {
                  "name": "libxml2-python-0:2.9.1-6.el7.5.s390x",
                  "product_id": "libxml2-python-0:2.9.1-6.el7.5.s390x",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-python@2.9.1-6.el7.5?arch=s390x"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
                "product": {
                  "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
                  "product_id": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-debuginfo@2.9.1-6.el7.5?arch=s390x"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-static-0:2.9.1-6.el7.5.s390x",
                "product": {
                  "name": "libxml2-static-0:2.9.1-6.el7.5.s390x",
                  "product_id": "libxml2-static-0:2.9.1-6.el7.5.s390x",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-static@2.9.1-6.el7.5?arch=s390x"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "s390x"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libxml2-0:2.9.1-6.el7.5.s390",
                "product": {
                  "name": "libxml2-0:2.9.1-6.el7.5.s390",
                  "product_id": "libxml2-0:2.9.1-6.el7.5.s390",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2@2.9.1-6.el7.5?arch=s390"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-devel-0:2.9.1-6.el7.5.s390",
                "product": {
                  "name": "libxml2-devel-0:2.9.1-6.el7.5.s390",
                  "product_id": "libxml2-devel-0:2.9.1-6.el7.5.s390",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-devel@2.9.1-6.el7.5?arch=s390"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
                "product": {
                  "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
                  "product_id": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-debuginfo@2.9.1-6.el7.5?arch=s390"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-static-0:2.9.1-6.el7.5.s390",
                "product": {
                  "name": "libxml2-static-0:2.9.1-6.el7.5.s390",
                  "product_id": "libxml2-static-0:2.9.1-6.el7.5.s390",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-static@2.9.1-6.el7.5?arch=s390"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "s390"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libxml2-0:2.9.1-6.el7.5.ppc64",
                "product": {
                  "name": "libxml2-0:2.9.1-6.el7.5.ppc64",
                  "product_id": "libxml2-0:2.9.1-6.el7.5.ppc64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2@2.9.1-6.el7.5?arch=ppc64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-devel-0:2.9.1-6.el7.5.ppc64",
                "product": {
                  "name": "libxml2-devel-0:2.9.1-6.el7.5.ppc64",
                  "product_id": "libxml2-devel-0:2.9.1-6.el7.5.ppc64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-devel@2.9.1-6.el7.5?arch=ppc64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-python-0:2.9.1-6.el7.5.ppc64",
                "product": {
                  "name": "libxml2-python-0:2.9.1-6.el7.5.ppc64",
                  "product_id": "libxml2-python-0:2.9.1-6.el7.5.ppc64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-python@2.9.1-6.el7.5?arch=ppc64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
                "product": {
                  "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
                  "product_id": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-debuginfo@2.9.1-6.el7.5?arch=ppc64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-static-0:2.9.1-6.el7.5.ppc64",
                "product": {
                  "name": "libxml2-static-0:2.9.1-6.el7.5.ppc64",
                  "product_id": "libxml2-static-0:2.9.1-6.el7.5.ppc64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-static@2.9.1-6.el7.5?arch=ppc64"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "ppc64"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libxml2-0:2.9.1-6.el7.5.ppc",
                "product": {
                  "name": "libxml2-0:2.9.1-6.el7.5.ppc",
                  "product_id": "libxml2-0:2.9.1-6.el7.5.ppc",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2@2.9.1-6.el7.5?arch=ppc"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-devel-0:2.9.1-6.el7.5.ppc",
                "product": {
                  "name": "libxml2-devel-0:2.9.1-6.el7.5.ppc",
                  "product_id": "libxml2-devel-0:2.9.1-6.el7.5.ppc",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-devel@2.9.1-6.el7.5?arch=ppc"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
                "product": {
                  "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
                  "product_id": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-debuginfo@2.9.1-6.el7.5?arch=ppc"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-static-0:2.9.1-6.el7.5.ppc",
                "product": {
                  "name": "libxml2-static-0:2.9.1-6.el7.5.ppc",
                  "product_id": "libxml2-static-0:2.9.1-6.el7.5.ppc",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-static@2.9.1-6.el7.5?arch=ppc"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "ppc"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libxml2-0:2.9.1-6.el7.5.ppc64le",
                "product": {
                  "name": "libxml2-0:2.9.1-6.el7.5.ppc64le",
                  "product_id": "libxml2-0:2.9.1-6.el7.5.ppc64le",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2@2.9.1-6.el7.5?arch=ppc64le"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
                "product": {
                  "name": "libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
                  "product_id": "libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-devel@2.9.1-6.el7.5?arch=ppc64le"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-python-0:2.9.1-6.el7.5.ppc64le",
                "product": {
                  "name": "libxml2-python-0:2.9.1-6.el7.5.ppc64le",
                  "product_id": "libxml2-python-0:2.9.1-6.el7.5.ppc64le",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-python@2.9.1-6.el7.5?arch=ppc64le"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
                "product": {
                  "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
                  "product_id": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-debuginfo@2.9.1-6.el7.5?arch=ppc64le"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "libxml2-static-0:2.9.1-6.el7.5.ppc64le",
                "product": {
                  "name": "libxml2-static-0:2.9.1-6.el7.5.ppc64le",
                  "product_id": "libxml2-static-0:2.9.1-6.el7.5.ppc64le",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/libxml2-static@2.9.1-6.el7.5?arch=ppc64le"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "ppc64le"
          }
        ],
        "category": "vendor",
        "name": "Red Hat"
      }
    ],
    "relationships": [
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.i686 as a component of Red Hat Enterprise Linux Client (v. 7)",
          "product_id": "7Client-7.9:libxml2-0:2.9.1-6.el7.5.i686"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.i686",
        "relates_to_product_reference": "7Client-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.ppc as a component of Red Hat Enterprise Linux Client (v. 7)",
          "product_id": "7Client-7.9:libxml2-0:2.9.1-6.el7.5.ppc"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.ppc",
        "relates_to_product_reference": "7Client-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux Client (v. 7)",
          "product_id": "7Client-7.9:libxml2-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7Client-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux Client (v. 7)",
          "product_id": "7Client-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7Client-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.s390 as a component of Red Hat Enterprise Linux Client (v. 7)",
          "product_id": "7Client-7.9:libxml2-0:2.9.1-6.el7.5.s390"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.s390",
        "relates_to_product_reference": "7Client-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux Client (v. 7)",
          "product_id": "7Client-7.9:libxml2-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7Client-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.src as a component of Red Hat Enterprise Linux Client (v. 7)",
          "product_id": "7Client-7.9:libxml2-0:2.9.1-6.el7.5.src"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.src",
        "relates_to_product_reference": "7Client-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux Client (v. 7)",
          "product_id": "7Client-7.9:libxml2-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7Client-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.i686 as a component of Red Hat Enterprise Linux Client (v. 7)",
          "product_id": "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
        "relates_to_product_reference": "7Client-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc as a component of Red Hat Enterprise Linux Client (v. 7)",
          "product_id": "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
        "relates_to_product_reference": "7Client-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux Client (v. 7)",
          "product_id": "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7Client-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux Client (v. 7)",
          "product_id": "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7Client-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390 as a component of Red Hat Enterprise Linux Client (v. 7)",
          "product_id": "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
        "relates_to_product_reference": "7Client-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux Client (v. 7)",
          "product_id": "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7Client-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux Client (v. 7)",
          "product_id": "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7Client-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.i686 as a component of Red Hat Enterprise Linux Client (v. 7)",
          "product_id": "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.i686",
        "relates_to_product_reference": "7Client-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.ppc as a component of Red Hat Enterprise Linux Client (v. 7)",
          "product_id": "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.ppc",
        "relates_to_product_reference": "7Client-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux Client (v. 7)",
          "product_id": "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7Client-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux Client (v. 7)",
          "product_id": "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7Client-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.s390 as a component of Red Hat Enterprise Linux Client (v. 7)",
          "product_id": "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.s390",
        "relates_to_product_reference": "7Client-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux Client (v. 7)",
          "product_id": "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7Client-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux Client (v. 7)",
          "product_id": "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7Client-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-python-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux Client (v. 7)",
          "product_id": "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-python-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7Client-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-python-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux Client (v. 7)",
          "product_id": "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-python-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7Client-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-python-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux Client (v. 7)",
          "product_id": "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-python-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7Client-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-python-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux Client (v. 7)",
          "product_id": "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-python-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7Client-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.i686 as a component of Red Hat Enterprise Linux Client (v. 7)",
          "product_id": "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.i686"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.i686",
        "relates_to_product_reference": "7Client-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.ppc as a component of Red Hat Enterprise Linux Client (v. 7)",
          "product_id": "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.ppc",
        "relates_to_product_reference": "7Client-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux Client (v. 7)",
          "product_id": "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7Client-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux Client (v. 7)",
          "product_id": "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7Client-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.s390 as a component of Red Hat Enterprise Linux Client (v. 7)",
          "product_id": "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.s390"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.s390",
        "relates_to_product_reference": "7Client-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux Client (v. 7)",
          "product_id": "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7Client-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux Client (v. 7)",
          "product_id": "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7Client-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.i686 as a component of Red Hat Enterprise Linux Client Optional (v. 7)",
          "product_id": "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.i686",
        "relates_to_product_reference": "7Client-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.ppc as a component of Red Hat Enterprise Linux Client Optional (v. 7)",
          "product_id": "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.ppc",
        "relates_to_product_reference": "7Client-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux Client Optional (v. 7)",
          "product_id": "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7Client-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux Client Optional (v. 7)",
          "product_id": "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7Client-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.s390 as a component of Red Hat Enterprise Linux Client Optional (v. 7)",
          "product_id": "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.s390",
        "relates_to_product_reference": "7Client-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux Client Optional (v. 7)",
          "product_id": "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7Client-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.src as a component of Red Hat Enterprise Linux Client Optional (v. 7)",
          "product_id": "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.src"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.src",
        "relates_to_product_reference": "7Client-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux Client Optional (v. 7)",
          "product_id": "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7Client-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.i686 as a component of Red Hat Enterprise Linux Client Optional (v. 7)",
          "product_id": "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
        "relates_to_product_reference": "7Client-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc as a component of Red Hat Enterprise Linux Client Optional (v. 7)",
          "product_id": "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
        "relates_to_product_reference": "7Client-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux Client Optional (v. 7)",
          "product_id": "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7Client-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux Client Optional (v. 7)",
          "product_id": "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7Client-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390 as a component of Red Hat Enterprise Linux Client Optional (v. 7)",
          "product_id": "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
        "relates_to_product_reference": "7Client-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux Client Optional (v. 7)",
          "product_id": "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7Client-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux Client Optional (v. 7)",
          "product_id": "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7Client-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.i686 as a component of Red Hat Enterprise Linux Client Optional (v. 7)",
          "product_id": "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.i686",
        "relates_to_product_reference": "7Client-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.ppc as a component of Red Hat Enterprise Linux Client Optional (v. 7)",
          "product_id": "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.ppc",
        "relates_to_product_reference": "7Client-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux Client Optional (v. 7)",
          "product_id": "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7Client-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux Client Optional (v. 7)",
          "product_id": "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7Client-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.s390 as a component of Red Hat Enterprise Linux Client Optional (v. 7)",
          "product_id": "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.s390",
        "relates_to_product_reference": "7Client-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux Client Optional (v. 7)",
          "product_id": "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7Client-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux Client Optional (v. 7)",
          "product_id": "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7Client-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-python-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux Client Optional (v. 7)",
          "product_id": "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-python-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7Client-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-python-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux Client Optional (v. 7)",
          "product_id": "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-python-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7Client-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-python-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux Client Optional (v. 7)",
          "product_id": "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-python-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7Client-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-python-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux Client Optional (v. 7)",
          "product_id": "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-python-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7Client-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.i686 as a component of Red Hat Enterprise Linux Client Optional (v. 7)",
          "product_id": "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.i686",
        "relates_to_product_reference": "7Client-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.ppc as a component of Red Hat Enterprise Linux Client Optional (v. 7)",
          "product_id": "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.ppc",
        "relates_to_product_reference": "7Client-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux Client Optional (v. 7)",
          "product_id": "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7Client-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux Client Optional (v. 7)",
          "product_id": "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7Client-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.s390 as a component of Red Hat Enterprise Linux Client Optional (v. 7)",
          "product_id": "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.s390",
        "relates_to_product_reference": "7Client-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux Client Optional (v. 7)",
          "product_id": "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7Client-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux Client Optional (v. 7)",
          "product_id": "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7Client-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.i686 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)",
          "product_id": "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.i686"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.i686",
        "relates_to_product_reference": "7ComputeNode-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.ppc as a component of Red Hat Enterprise Linux ComputeNode (v. 7)",
          "product_id": "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.ppc"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.ppc",
        "relates_to_product_reference": "7ComputeNode-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)",
          "product_id": "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7ComputeNode-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux ComputeNode (v. 7)",
          "product_id": "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7ComputeNode-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.s390 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)",
          "product_id": "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.s390"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.s390",
        "relates_to_product_reference": "7ComputeNode-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux ComputeNode (v. 7)",
          "product_id": "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7ComputeNode-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.src as a component of Red Hat Enterprise Linux ComputeNode (v. 7)",
          "product_id": "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.src"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.src",
        "relates_to_product_reference": "7ComputeNode-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)",
          "product_id": "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7ComputeNode-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.i686 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)",
          "product_id": "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
        "relates_to_product_reference": "7ComputeNode-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc as a component of Red Hat Enterprise Linux ComputeNode (v. 7)",
          "product_id": "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
        "relates_to_product_reference": "7ComputeNode-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)",
          "product_id": "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7ComputeNode-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux ComputeNode (v. 7)",
          "product_id": "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7ComputeNode-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)",
          "product_id": "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
        "relates_to_product_reference": "7ComputeNode-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux ComputeNode (v. 7)",
          "product_id": "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7ComputeNode-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)",
          "product_id": "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7ComputeNode-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.i686 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)",
          "product_id": "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.i686",
        "relates_to_product_reference": "7ComputeNode-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.ppc as a component of Red Hat Enterprise Linux ComputeNode (v. 7)",
          "product_id": "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.ppc",
        "relates_to_product_reference": "7ComputeNode-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)",
          "product_id": "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7ComputeNode-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux ComputeNode (v. 7)",
          "product_id": "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7ComputeNode-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.s390 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)",
          "product_id": "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.s390",
        "relates_to_product_reference": "7ComputeNode-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux ComputeNode (v. 7)",
          "product_id": "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7ComputeNode-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)",
          "product_id": "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7ComputeNode-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-python-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)",
          "product_id": "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-python-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7ComputeNode-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-python-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux ComputeNode (v. 7)",
          "product_id": "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-python-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7ComputeNode-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-python-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux ComputeNode (v. 7)",
          "product_id": "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-python-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7ComputeNode-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-python-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)",
          "product_id": "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-python-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7ComputeNode-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.i686 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)",
          "product_id": "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.i686"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.i686",
        "relates_to_product_reference": "7ComputeNode-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.ppc as a component of Red Hat Enterprise Linux ComputeNode (v. 7)",
          "product_id": "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.ppc",
        "relates_to_product_reference": "7ComputeNode-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)",
          "product_id": "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7ComputeNode-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux ComputeNode (v. 7)",
          "product_id": "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7ComputeNode-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.s390 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)",
          "product_id": "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.s390"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.s390",
        "relates_to_product_reference": "7ComputeNode-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux ComputeNode (v. 7)",
          "product_id": "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7ComputeNode-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux ComputeNode (v. 7)",
          "product_id": "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7ComputeNode-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.i686 as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
          "product_id": "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.i686",
        "relates_to_product_reference": "7ComputeNode-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.ppc as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
          "product_id": "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.ppc",
        "relates_to_product_reference": "7ComputeNode-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
          "product_id": "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7ComputeNode-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
          "product_id": "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7ComputeNode-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.s390 as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
          "product_id": "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.s390",
        "relates_to_product_reference": "7ComputeNode-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
          "product_id": "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7ComputeNode-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.src as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
          "product_id": "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.src"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.src",
        "relates_to_product_reference": "7ComputeNode-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
          "product_id": "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7ComputeNode-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.i686 as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
          "product_id": "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
        "relates_to_product_reference": "7ComputeNode-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
          "product_id": "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
        "relates_to_product_reference": "7ComputeNode-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
          "product_id": "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7ComputeNode-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
          "product_id": "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7ComputeNode-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390 as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
          "product_id": "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
        "relates_to_product_reference": "7ComputeNode-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
          "product_id": "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7ComputeNode-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
          "product_id": "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7ComputeNode-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.i686 as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
          "product_id": "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.i686",
        "relates_to_product_reference": "7ComputeNode-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.ppc as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
          "product_id": "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.ppc",
        "relates_to_product_reference": "7ComputeNode-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
          "product_id": "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7ComputeNode-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
          "product_id": "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7ComputeNode-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.s390 as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
          "product_id": "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.s390",
        "relates_to_product_reference": "7ComputeNode-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
          "product_id": "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7ComputeNode-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
          "product_id": "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7ComputeNode-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-python-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
          "product_id": "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-python-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7ComputeNode-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-python-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
          "product_id": "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-python-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7ComputeNode-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-python-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
          "product_id": "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-python-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7ComputeNode-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-python-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
          "product_id": "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-python-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7ComputeNode-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.i686 as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
          "product_id": "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.i686",
        "relates_to_product_reference": "7ComputeNode-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.ppc as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
          "product_id": "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.ppc",
        "relates_to_product_reference": "7ComputeNode-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
          "product_id": "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7ComputeNode-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
          "product_id": "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7ComputeNode-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.s390 as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
          "product_id": "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.s390",
        "relates_to_product_reference": "7ComputeNode-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
          "product_id": "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7ComputeNode-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux ComputeNode Optional (v. 7)",
          "product_id": "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7ComputeNode-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.i686 as a component of Red Hat Enterprise Linux Server (v. 7)",
          "product_id": "7Server-7.9:libxml2-0:2.9.1-6.el7.5.i686"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.i686",
        "relates_to_product_reference": "7Server-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.ppc as a component of Red Hat Enterprise Linux Server (v. 7)",
          "product_id": "7Server-7.9:libxml2-0:2.9.1-6.el7.5.ppc"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.ppc",
        "relates_to_product_reference": "7Server-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)",
          "product_id": "7Server-7.9:libxml2-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7Server-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux Server (v. 7)",
          "product_id": "7Server-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7Server-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.s390 as a component of Red Hat Enterprise Linux Server (v. 7)",
          "product_id": "7Server-7.9:libxml2-0:2.9.1-6.el7.5.s390"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.s390",
        "relates_to_product_reference": "7Server-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux Server (v. 7)",
          "product_id": "7Server-7.9:libxml2-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7Server-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.src as a component of Red Hat Enterprise Linux Server (v. 7)",
          "product_id": "7Server-7.9:libxml2-0:2.9.1-6.el7.5.src"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.src",
        "relates_to_product_reference": "7Server-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)",
          "product_id": "7Server-7.9:libxml2-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7Server-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.i686 as a component of Red Hat Enterprise Linux Server (v. 7)",
          "product_id": "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
        "relates_to_product_reference": "7Server-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc as a component of Red Hat Enterprise Linux Server (v. 7)",
          "product_id": "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
        "relates_to_product_reference": "7Server-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)",
          "product_id": "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7Server-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux Server (v. 7)",
          "product_id": "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7Server-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390 as a component of Red Hat Enterprise Linux Server (v. 7)",
          "product_id": "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
        "relates_to_product_reference": "7Server-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux Server (v. 7)",
          "product_id": "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7Server-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)",
          "product_id": "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7Server-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.i686 as a component of Red Hat Enterprise Linux Server (v. 7)",
          "product_id": "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.i686",
        "relates_to_product_reference": "7Server-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.ppc as a component of Red Hat Enterprise Linux Server (v. 7)",
          "product_id": "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.ppc",
        "relates_to_product_reference": "7Server-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)",
          "product_id": "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7Server-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux Server (v. 7)",
          "product_id": "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7Server-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.s390 as a component of Red Hat Enterprise Linux Server (v. 7)",
          "product_id": "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.s390",
        "relates_to_product_reference": "7Server-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux Server (v. 7)",
          "product_id": "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7Server-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)",
          "product_id": "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7Server-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-python-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)",
          "product_id": "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-python-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7Server-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-python-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux Server (v. 7)",
          "product_id": "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-python-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7Server-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-python-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux Server (v. 7)",
          "product_id": "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-python-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7Server-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-python-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)",
          "product_id": "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-python-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7Server-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.i686 as a component of Red Hat Enterprise Linux Server (v. 7)",
          "product_id": "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.i686"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.i686",
        "relates_to_product_reference": "7Server-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.ppc as a component of Red Hat Enterprise Linux Server (v. 7)",
          "product_id": "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.ppc",
        "relates_to_product_reference": "7Server-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)",
          "product_id": "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7Server-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux Server (v. 7)",
          "product_id": "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7Server-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.s390 as a component of Red Hat Enterprise Linux Server (v. 7)",
          "product_id": "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.s390"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.s390",
        "relates_to_product_reference": "7Server-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux Server (v. 7)",
          "product_id": "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7Server-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)",
          "product_id": "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7Server-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.i686 as a component of Red Hat Enterprise Linux Server Optional (v. 7)",
          "product_id": "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.i686",
        "relates_to_product_reference": "7Server-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.ppc as a component of Red Hat Enterprise Linux Server Optional (v. 7)",
          "product_id": "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.ppc",
        "relates_to_product_reference": "7Server-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)",
          "product_id": "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7Server-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux Server Optional (v. 7)",
          "product_id": "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7Server-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.s390 as a component of Red Hat Enterprise Linux Server Optional (v. 7)",
          "product_id": "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.s390",
        "relates_to_product_reference": "7Server-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 7)",
          "product_id": "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7Server-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.src as a component of Red Hat Enterprise Linux Server Optional (v. 7)",
          "product_id": "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.src"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.src",
        "relates_to_product_reference": "7Server-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)",
          "product_id": "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7Server-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.i686 as a component of Red Hat Enterprise Linux Server Optional (v. 7)",
          "product_id": "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
        "relates_to_product_reference": "7Server-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc as a component of Red Hat Enterprise Linux Server Optional (v. 7)",
          "product_id": "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
        "relates_to_product_reference": "7Server-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)",
          "product_id": "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7Server-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux Server Optional (v. 7)",
          "product_id": "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7Server-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390 as a component of Red Hat Enterprise Linux Server Optional (v. 7)",
          "product_id": "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
        "relates_to_product_reference": "7Server-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 7)",
          "product_id": "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7Server-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)",
          "product_id": "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7Server-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.i686 as a component of Red Hat Enterprise Linux Server Optional (v. 7)",
          "product_id": "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.i686",
        "relates_to_product_reference": "7Server-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.ppc as a component of Red Hat Enterprise Linux Server Optional (v. 7)",
          "product_id": "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.ppc",
        "relates_to_product_reference": "7Server-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)",
          "product_id": "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7Server-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux Server Optional (v. 7)",
          "product_id": "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7Server-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.s390 as a component of Red Hat Enterprise Linux Server Optional (v. 7)",
          "product_id": "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.s390",
        "relates_to_product_reference": "7Server-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 7)",
          "product_id": "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7Server-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)",
          "product_id": "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7Server-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-python-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)",
          "product_id": "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-python-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7Server-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-python-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux Server Optional (v. 7)",
          "product_id": "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-python-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7Server-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-python-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 7)",
          "product_id": "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-python-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7Server-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-python-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)",
          "product_id": "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-python-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7Server-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.i686 as a component of Red Hat Enterprise Linux Server Optional (v. 7)",
          "product_id": "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.i686",
        "relates_to_product_reference": "7Server-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.ppc as a component of Red Hat Enterprise Linux Server Optional (v. 7)",
          "product_id": "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.ppc",
        "relates_to_product_reference": "7Server-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)",
          "product_id": "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7Server-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux Server Optional (v. 7)",
          "product_id": "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7Server-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.s390 as a component of Red Hat Enterprise Linux Server Optional (v. 7)",
          "product_id": "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.s390",
        "relates_to_product_reference": "7Server-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 7)",
          "product_id": "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7Server-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)",
          "product_id": "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7Server-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.i686 as a component of Red Hat Enterprise Linux Workstation (v. 7)",
          "product_id": "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.i686"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.i686",
        "relates_to_product_reference": "7Workstation-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.ppc as a component of Red Hat Enterprise Linux Workstation (v. 7)",
          "product_id": "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.ppc"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.ppc",
        "relates_to_product_reference": "7Workstation-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux Workstation (v. 7)",
          "product_id": "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7Workstation-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux Workstation (v. 7)",
          "product_id": "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7Workstation-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.s390 as a component of Red Hat Enterprise Linux Workstation (v. 7)",
          "product_id": "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.s390"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.s390",
        "relates_to_product_reference": "7Workstation-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux Workstation (v. 7)",
          "product_id": "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7Workstation-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.src as a component of Red Hat Enterprise Linux Workstation (v. 7)",
          "product_id": "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.src"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.src",
        "relates_to_product_reference": "7Workstation-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)",
          "product_id": "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7Workstation-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.i686 as a component of Red Hat Enterprise Linux Workstation (v. 7)",
          "product_id": "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
        "relates_to_product_reference": "7Workstation-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc as a component of Red Hat Enterprise Linux Workstation (v. 7)",
          "product_id": "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
        "relates_to_product_reference": "7Workstation-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux Workstation (v. 7)",
          "product_id": "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7Workstation-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux Workstation (v. 7)",
          "product_id": "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7Workstation-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390 as a component of Red Hat Enterprise Linux Workstation (v. 7)",
          "product_id": "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
        "relates_to_product_reference": "7Workstation-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux Workstation (v. 7)",
          "product_id": "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7Workstation-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)",
          "product_id": "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7Workstation-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.i686 as a component of Red Hat Enterprise Linux Workstation (v. 7)",
          "product_id": "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.i686",
        "relates_to_product_reference": "7Workstation-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.ppc as a component of Red Hat Enterprise Linux Workstation (v. 7)",
          "product_id": "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.ppc",
        "relates_to_product_reference": "7Workstation-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux Workstation (v. 7)",
          "product_id": "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7Workstation-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux Workstation (v. 7)",
          "product_id": "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7Workstation-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.s390 as a component of Red Hat Enterprise Linux Workstation (v. 7)",
          "product_id": "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.s390",
        "relates_to_product_reference": "7Workstation-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux Workstation (v. 7)",
          "product_id": "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7Workstation-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)",
          "product_id": "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7Workstation-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-python-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux Workstation (v. 7)",
          "product_id": "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-python-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7Workstation-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-python-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux Workstation (v. 7)",
          "product_id": "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-python-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7Workstation-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-python-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux Workstation (v. 7)",
          "product_id": "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-python-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7Workstation-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-python-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)",
          "product_id": "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-python-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7Workstation-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.i686 as a component of Red Hat Enterprise Linux Workstation (v. 7)",
          "product_id": "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.i686"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.i686",
        "relates_to_product_reference": "7Workstation-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.ppc as a component of Red Hat Enterprise Linux Workstation (v. 7)",
          "product_id": "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.ppc",
        "relates_to_product_reference": "7Workstation-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux Workstation (v. 7)",
          "product_id": "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7Workstation-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux Workstation (v. 7)",
          "product_id": "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7Workstation-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.s390 as a component of Red Hat Enterprise Linux Workstation (v. 7)",
          "product_id": "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.s390"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.s390",
        "relates_to_product_reference": "7Workstation-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux Workstation (v. 7)",
          "product_id": "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7Workstation-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)",
          "product_id": "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7Workstation-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.i686 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)",
          "product_id": "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.i686",
        "relates_to_product_reference": "7Workstation-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.ppc as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)",
          "product_id": "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.ppc",
        "relates_to_product_reference": "7Workstation-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)",
          "product_id": "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7Workstation-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)",
          "product_id": "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7Workstation-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.s390 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)",
          "product_id": "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.s390",
        "relates_to_product_reference": "7Workstation-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)",
          "product_id": "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7Workstation-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.src as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)",
          "product_id": "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.src"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.src",
        "relates_to_product_reference": "7Workstation-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)",
          "product_id": "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7Workstation-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.i686 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)",
          "product_id": "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
        "relates_to_product_reference": "7Workstation-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)",
          "product_id": "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
        "relates_to_product_reference": "7Workstation-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)",
          "product_id": "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7Workstation-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)",
          "product_id": "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7Workstation-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)",
          "product_id": "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
        "relates_to_product_reference": "7Workstation-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)",
          "product_id": "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7Workstation-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)",
          "product_id": "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7Workstation-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.i686 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)",
          "product_id": "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.i686",
        "relates_to_product_reference": "7Workstation-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.ppc as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)",
          "product_id": "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.ppc",
        "relates_to_product_reference": "7Workstation-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)",
          "product_id": "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7Workstation-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)",
          "product_id": "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7Workstation-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.s390 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)",
          "product_id": "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.s390",
        "relates_to_product_reference": "7Workstation-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)",
          "product_id": "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7Workstation-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-devel-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)",
          "product_id": "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-devel-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7Workstation-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-python-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)",
          "product_id": "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-python-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7Workstation-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-python-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)",
          "product_id": "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-python-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7Workstation-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-python-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)",
          "product_id": "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-python-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7Workstation-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-python-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)",
          "product_id": "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-python-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7Workstation-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.i686 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)",
          "product_id": "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.i686",
        "relates_to_product_reference": "7Workstation-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.ppc as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)",
          "product_id": "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.ppc",
        "relates_to_product_reference": "7Workstation-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.ppc64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)",
          "product_id": "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.ppc64",
        "relates_to_product_reference": "7Workstation-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.ppc64le as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)",
          "product_id": "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.ppc64le",
        "relates_to_product_reference": "7Workstation-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.s390 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)",
          "product_id": "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.s390",
        "relates_to_product_reference": "7Workstation-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.s390x as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)",
          "product_id": "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.s390x",
        "relates_to_product_reference": "7Workstation-optional-7.9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libxml2-static-0:2.9.1-6.el7.5.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)",
          "product_id": "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64"
        },
        "product_reference": "libxml2-static-0:2.9.1-6.el7.5.x86_64",
        "relates_to_product_reference": "7Workstation-optional-7.9"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2019-19956",
      "cwe": {
        "id": "CWE-772",
        "name": "Missing Release of Resource after Effective Lifetime"
      },
      "discovery_date": "2020-01-08T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1788856"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "xmlParseBalancedChunkMemoryRecover in parser.c in libxml2 before 2.9.10 has a memory leak related to newDoc-\u003eoldNs.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "libxml2: memory leak in xmlParseBalancedChunkMemoryRecover in parser.c",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Client-7.9:libxml2-0:2.9.1-6.el7.5.i686",
          "7Client-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
          "7Client-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
          "7Client-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
          "7Client-7.9:libxml2-0:2.9.1-6.el7.5.s390",
          "7Client-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
          "7Client-7.9:libxml2-0:2.9.1-6.el7.5.src",
          "7Client-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
          "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
          "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
          "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
          "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
          "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
          "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
          "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
          "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
          "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
          "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
          "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
          "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
          "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
          "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
          "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
          "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
          "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
          "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
          "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
          "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
          "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
          "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
          "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
          "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
          "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
          "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
          "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
          "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
          "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
          "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
          "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
          "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
          "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
          "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
          "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
          "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
          "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
          "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
          "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
          "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
          "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
          "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
          "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
          "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
          "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
          "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
          "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
          "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
          "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
          "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
          "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
          "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
          "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
          "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
          "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
          "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
          "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
          "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
          "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.i686",
          "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
          "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
          "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
          "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.s390",
          "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
          "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.src",
          "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
          "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
          "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
          "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
          "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
          "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
          "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
          "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
          "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
          "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
          "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
          "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
          "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
          "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
          "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
          "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
          "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
          "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
          "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
          "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
          "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
          "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
          "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
          "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
          "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
          "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
          "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
          "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
          "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
          "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
          "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
          "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
          "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
          "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
          "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
          "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
          "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
          "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
          "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
          "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
          "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
          "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
          "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
          "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
          "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
          "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
          "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
          "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
          "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
          "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
          "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
          "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
          "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
          "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
          "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
          "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
          "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
          "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
          "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
          "7Server-7.9:libxml2-0:2.9.1-6.el7.5.i686",
          "7Server-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
          "7Server-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
          "7Server-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
          "7Server-7.9:libxml2-0:2.9.1-6.el7.5.s390",
          "7Server-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
          "7Server-7.9:libxml2-0:2.9.1-6.el7.5.src",
          "7Server-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
          "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
          "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
          "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
          "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
          "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
          "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
          "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
          "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
          "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
          "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
          "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
          "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
          "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
          "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
          "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
          "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
          "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
          "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
          "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
          "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
          "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
          "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
          "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
          "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
          "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
          "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
          "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
          "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
          "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
          "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
          "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
          "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
          "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
          "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
          "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
          "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
          "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
          "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
          "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
          "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
          "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
          "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
          "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
          "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
          "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
          "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
          "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
          "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
          "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
          "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
          "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
          "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
          "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
          "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
          "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
          "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
          "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
          "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
          "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.i686",
          "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
          "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
          "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
          "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.s390",
          "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
          "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.src",
          "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
          "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
          "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
          "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
          "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
          "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
          "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
          "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
          "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
          "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
          "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
          "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
          "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
          "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
          "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
          "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
          "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
          "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
          "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
          "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
          "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
          "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
          "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
          "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
          "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
          "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
          "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
          "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
          "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
          "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
          "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
          "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
          "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
          "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
          "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
          "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
          "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
          "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
          "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
          "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
          "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
          "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
          "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
          "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
          "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
          "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
          "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
          "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
          "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
          "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
          "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
          "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
          "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
          "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
          "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
          "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
          "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
          "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
          "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-19956"
        },
        {
          "category": "external",
          "summary": "RHBZ#1788856",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1788856"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-19956",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-19956"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-19956",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-19956"
        }
      ],
      "release_date": "2020-01-08T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2020-09-29T19:48:02+00:00",
          "details": "For details on how to apply this update, which includes the changes described in this advisory, refer to:\n\nhttps://access.redhat.com/articles/11258\n\nThe desktop must be restarted (log out, then log back in) for this update to take effect.",
          "product_ids": [
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2020:3996"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "libxml2: memory leak in xmlParseBalancedChunkMemoryRecover in parser.c"
    },
    {
      "cve": "CVE-2019-20388",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "discovery_date": "2020-02-06T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1799734"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A memory leak was found in the xmlSchemaValidateStream function of libxml2. Applications that use this library may be vulnerable to memory not being freed leading to a denial of service. System availability is the highest threat from this vulnerability.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "libxml2: memory leak in xmlSchemaPreRun in xmlschemas.c",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Client-7.9:libxml2-0:2.9.1-6.el7.5.i686",
          "7Client-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
          "7Client-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
          "7Client-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
          "7Client-7.9:libxml2-0:2.9.1-6.el7.5.s390",
          "7Client-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
          "7Client-7.9:libxml2-0:2.9.1-6.el7.5.src",
          "7Client-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
          "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
          "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
          "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
          "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
          "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
          "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
          "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
          "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
          "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
          "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
          "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
          "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
          "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
          "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
          "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
          "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
          "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
          "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
          "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
          "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
          "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
          "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
          "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
          "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
          "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
          "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
          "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
          "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
          "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
          "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
          "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
          "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
          "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
          "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
          "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
          "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
          "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
          "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
          "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
          "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
          "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
          "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
          "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
          "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
          "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
          "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
          "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
          "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
          "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
          "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
          "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
          "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
          "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
          "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
          "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
          "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
          "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
          "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
          "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.i686",
          "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
          "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
          "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
          "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.s390",
          "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
          "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.src",
          "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
          "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
          "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
          "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
          "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
          "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
          "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
          "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
          "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
          "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
          "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
          "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
          "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
          "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
          "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
          "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
          "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
          "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
          "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
          "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
          "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
          "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
          "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
          "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
          "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
          "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
          "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
          "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
          "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
          "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
          "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
          "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
          "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
          "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
          "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
          "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
          "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
          "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
          "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
          "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
          "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
          "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
          "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
          "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
          "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
          "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
          "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
          "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
          "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
          "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
          "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
          "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
          "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
          "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
          "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
          "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
          "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
          "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
          "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
          "7Server-7.9:libxml2-0:2.9.1-6.el7.5.i686",
          "7Server-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
          "7Server-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
          "7Server-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
          "7Server-7.9:libxml2-0:2.9.1-6.el7.5.s390",
          "7Server-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
          "7Server-7.9:libxml2-0:2.9.1-6.el7.5.src",
          "7Server-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
          "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
          "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
          "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
          "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
          "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
          "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
          "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
          "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
          "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
          "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
          "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
          "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
          "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
          "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
          "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
          "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
          "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
          "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
          "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
          "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
          "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
          "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
          "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
          "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
          "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
          "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
          "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
          "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
          "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
          "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
          "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
          "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
          "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
          "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
          "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
          "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
          "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
          "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
          "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
          "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
          "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
          "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
          "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
          "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
          "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
          "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
          "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
          "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
          "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
          "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
          "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
          "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
          "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
          "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
          "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
          "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
          "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
          "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
          "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.i686",
          "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
          "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
          "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
          "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.s390",
          "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
          "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.src",
          "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
          "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
          "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
          "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
          "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
          "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
          "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
          "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
          "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
          "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
          "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
          "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
          "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
          "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
          "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
          "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
          "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
          "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
          "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
          "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
          "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
          "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
          "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
          "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
          "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
          "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
          "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
          "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
          "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
          "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
          "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
          "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
          "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
          "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
          "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
          "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
          "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
          "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
          "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
          "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
          "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
          "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
          "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
          "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
          "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
          "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
          "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
          "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
          "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
          "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
          "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
          "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
          "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
          "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
          "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
          "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
          "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
          "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
          "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-20388"
        },
        {
          "category": "external",
          "summary": "RHBZ#1799734",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1799734"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-20388",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-20388"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-20388",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-20388"
        }
      ],
      "release_date": "2020-01-21T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2020-09-29T19:48:02+00:00",
          "details": "For details on how to apply this update, which includes the changes described in this advisory, refer to:\n\nhttps://access.redhat.com/articles/11258\n\nThe desktop must be restarted (log out, then log back in) for this update to take effect.",
          "product_ids": [
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2020:3996"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "libxml2: memory leak in xmlSchemaPreRun in xmlschemas.c"
    },
    {
      "cve": "CVE-2020-7595",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "discovery_date": "2020-02-06T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1799786"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "xmlStringLenDecodeEntities in parser.c in libxml2 2.9.10 has an infinite loop in a certain end-of-file situation.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "libxml2: infinite loop in xmlStringLenDecodeEntities in some end-of-file situations",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Client-7.9:libxml2-0:2.9.1-6.el7.5.i686",
          "7Client-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
          "7Client-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
          "7Client-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
          "7Client-7.9:libxml2-0:2.9.1-6.el7.5.s390",
          "7Client-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
          "7Client-7.9:libxml2-0:2.9.1-6.el7.5.src",
          "7Client-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
          "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
          "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
          "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
          "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
          "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
          "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
          "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
          "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
          "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
          "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
          "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
          "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
          "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
          "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
          "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
          "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
          "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
          "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
          "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
          "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
          "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
          "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
          "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
          "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
          "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
          "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
          "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
          "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
          "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
          "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
          "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
          "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
          "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
          "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
          "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
          "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
          "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
          "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
          "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
          "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
          "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
          "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
          "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
          "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
          "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
          "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
          "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
          "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
          "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
          "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
          "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
          "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
          "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
          "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
          "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
          "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
          "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
          "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
          "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.i686",
          "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
          "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
          "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
          "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.s390",
          "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
          "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.src",
          "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
          "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
          "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
          "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
          "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
          "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
          "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
          "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
          "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
          "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
          "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
          "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
          "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
          "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
          "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
          "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
          "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
          "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
          "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
          "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
          "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
          "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
          "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
          "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
          "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
          "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
          "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
          "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
          "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
          "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
          "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
          "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
          "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
          "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
          "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
          "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
          "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
          "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
          "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
          "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
          "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
          "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
          "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
          "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
          "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
          "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
          "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
          "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
          "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
          "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
          "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
          "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
          "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
          "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
          "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
          "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
          "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
          "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
          "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
          "7Server-7.9:libxml2-0:2.9.1-6.el7.5.i686",
          "7Server-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
          "7Server-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
          "7Server-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
          "7Server-7.9:libxml2-0:2.9.1-6.el7.5.s390",
          "7Server-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
          "7Server-7.9:libxml2-0:2.9.1-6.el7.5.src",
          "7Server-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
          "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
          "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
          "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
          "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
          "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
          "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
          "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
          "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
          "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
          "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
          "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
          "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
          "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
          "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
          "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
          "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
          "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
          "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
          "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
          "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
          "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
          "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
          "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
          "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
          "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
          "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
          "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
          "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
          "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
          "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
          "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
          "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
          "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
          "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
          "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
          "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
          "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
          "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
          "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
          "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
          "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
          "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
          "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
          "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
          "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
          "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
          "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
          "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
          "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
          "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
          "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
          "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
          "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
          "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
          "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
          "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
          "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
          "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
          "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.i686",
          "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
          "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
          "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
          "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.s390",
          "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
          "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.src",
          "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
          "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
          "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
          "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
          "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
          "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
          "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
          "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
          "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
          "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
          "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
          "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
          "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
          "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
          "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
          "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
          "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
          "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
          "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
          "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
          "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
          "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
          "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
          "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
          "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
          "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
          "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
          "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
          "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
          "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
          "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
          "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
          "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
          "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
          "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
          "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
          "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
          "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
          "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
          "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
          "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
          "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
          "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
          "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
          "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
          "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
          "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
          "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
          "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
          "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
          "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
          "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
          "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
          "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
          "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
          "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
          "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
          "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
          "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2020-7595"
        },
        {
          "category": "external",
          "summary": "RHBZ#1799786",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1799786"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2020-7595",
          "url": "https://www.cve.org/CVERecord?id=CVE-2020-7595"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2020-7595",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2020-7595"
        }
      ],
      "release_date": "2020-01-21T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2020-09-29T19:48:02+00:00",
          "details": "For details on how to apply this update, which includes the changes described in this advisory, refer to:\n\nhttps://access.redhat.com/articles/11258\n\nThe desktop must be restarted (log out, then log back in) for this update to take effect.",
          "product_ids": [
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2020:3996"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Client-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Client-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Client-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Client-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Client-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Client-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Client-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Client-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Client-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Client-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7ComputeNode-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7ComputeNode-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7ComputeNode-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Server-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Server-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Server-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Server-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Server-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Server-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Server-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Server-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Server-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Server-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Workstation-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Workstation-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Workstation-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Workstation-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Workstation-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.i686",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.s390x",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.src",
            "7Workstation-optional-7.9:libxml2-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.i686",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.s390x",
            "7Workstation-optional-7.9:libxml2-debuginfo-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.i686",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.s390x",
            "7Workstation-optional-7.9:libxml2-devel-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.s390x",
            "7Workstation-optional-7.9:libxml2-python-0:2.9.1-6.el7.5.x86_64",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.i686",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.ppc64le",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.s390x",
            "7Workstation-optional-7.9:libxml2-static-0:2.9.1-6.el7.5.x86_64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "libxml2: infinite loop in xmlStringLenDecodeEntities in some end-of-file situations"
    }
  ]
}

{
  "document": {
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited. (TLPv2: TLP:CLEAR)",
      "tlp": {
        "label": "WHITE"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the firmware version V3.1 for the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP (incl. SIPLUS variant).\n\nThese GNU/Linux vulnerabilities have been externally identified. Siemens is preparing fix versions and recommends specific countermeasures for products where fixes are not, or not yet available.\n\nNote: This SSA advises vulnerabilities for firmware version V3.1 only; for versions \u003c V3.1 refer to Siemens Security Bulletin SSB-439005 (\nhttps://cert-portal.siemens.com/productcert/html/ssb-439005.html).",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "Siemens Security Advisories are subject to the terms and conditions contained in Siemens\u0027 underlying license terms or other applicable agreements previously agreed to with Siemens (hereinafter \"License Terms\"). To the extent applicable to information, software or documentation made available in or through a Siemens Security Advisory, the Terms of Use of Siemens\u0027 Global Website (https://www.siemens.com/terms_of_use, hereinafter \"Terms of Use\"), in particular Sections 8-10 of the Terms of Use, shall apply additionally. In case of conflicts, the License Terms shall prevail over the Terms of Use.",
        "title": "Terms of Use"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "productcert@siemens.com",
      "name": "Siemens ProductCERT",
      "namespace": "https://www.siemens.com"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-398330: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1 - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-398330.html"
      },
      {
        "category": "self",
        "summary": "SSA-398330: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1 - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-398330.json"
      },
      {
        "category": "self",
        "summary": "SSA-398330: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1 - PDF Version",
        "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-398330.pdf"
      },
      {
        "category": "self",
        "summary": "SSA-398330: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1 - TXT Version",
        "url": "https://cert-portal.siemens.com/productcert/txt/ssa-398330.txt"
      }
    ],
    "title": "SSA-398330: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1",
    "tracking": {
      "current_release_date": "2024-06-11T00:00:00Z",
      "generator": {
        "engine": {
          "name": "Siemens ProductCERT CSAF Generator",
          "version": "1"
        }
      },
      "id": "SSA-398330",
      "initial_release_date": "2023-12-12T00:00:00Z",
      "revision_history": [
        {
          "date": "2023-12-12T00:00:00Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        },
        {
          "date": "2024-01-09T00:00:00Z",
          "legacy_version": "1.1",
          "number": "2",
          "summary": "Added CVE-2021-44879, CVE-2023-46218, CVE-2023-46219, and CVE-2023-48795"
        },
        {
          "date": "2024-02-13T00:00:00Z",
          "legacy_version": "1.2",
          "number": "3",
          "summary": "Added CVE-2023-45898, CVE-2023-46862, CVE-2023-6121, CVE-2023-6817, CVE-2023-6931, CVE-2023-6932, CVE-2024-0584"
        },
        {
          "date": "2024-03-12T00:00:00Z",
          "legacy_version": "1.3",
          "number": "4",
          "summary": "Added CVE-2023-52425, CVE-2023-52426, CVE-2023-45918"
        },
        {
          "date": "2024-04-09T00:00:00Z",
          "legacy_version": "1.4",
          "number": "5",
          "summary": "Added CVE-2024-28757"
        },
        {
          "date": "2024-05-14T00:00:00Z",
          "legacy_version": "1.5",
          "number": "6",
          "summary": "Added CVE-2024-2004, CVE-2024-2379, CVE-2024-2398, CVE-2024-2466, CVE-2024-2511, CVE-2024-28085, CVE-2024-28182, CVE-2024-28834, CVE-2024-28835"
        },
        {
          "date": "2024-06-11T00:00:00Z",
          "legacy_version": "1.6",
          "number": "7",
          "summary": "Added CVE-2024-2961, CVE-2024-33599, CVE-2024-33600, CVE-2024-33601, CVE-2024-33602, CVE-2024-34459"
        }
      ],
      "status": "interim",
      "version": "7"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003e=V3.1.0",
                "product": {
                  "name": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
                  "product_id": "1",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6ES7518-4AX00-1AB0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003e=V3.1.0",
                "product": {
                  "name": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
                  "product_id": "2",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6ES7518-4AX00-1AC0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003e=V3.1.0",
                "product": {
                  "name": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
                  "product_id": "3",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6ES7518-4FX00-1AB0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003e=V3.1.0",
                "product": {
                  "name": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
                  "product_id": "4",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6ES7518-4FX00-1AC0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003e=V3.1.0",
                "product": {
                  "name": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
                  "product_id": "5",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6AG1518-4AX00-4AC0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2013-0340",
      "cwe": {
        "id": "CWE-611",
        "name": "Improper Restriction of XML External Entity Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "expat 2.1.0 and earlier does not properly handle entities expansion unless an application developer uses the XML_SetEntityDeclHandler function, which allows remote attackers to cause a denial of service (resource consumption), send HTTP requests to intranet servers, or read arbitrary files via a crafted XML document, aka an XML External Entity (XXE) issue.  NOTE: it could be argued that because expat already provides the ability to disable external entity expansion, the responsibility for resolving this issue lies with application developers; according to this argument, this entry should be REJECTed, and each affected application would need its own CVE.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2013-0340"
    },
    {
      "cve": "CVE-2013-4235",
      "cwe": {
        "id": "CWE-367",
        "name": "Time-of-check Time-of-use (TOCTOU) Race Condition"
      },
      "notes": [
        {
          "category": "summary",
          "text": "shadow: TOCTOU (time-of-check time-of-use) race condition when copying and removing directory trees",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2013-4235"
    },
    {
      "cve": "CVE-2014-7209",
      "cwe": {
        "id": "CWE-77",
        "name": "Improper Neutralization of Special Elements used in a Command (\u0027Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "run-mailcap in the Debian mime-support package before 3.52-1+deb7u1 allows context-dependent attackers to execute arbitrary commands via shell metacharacters in a filename.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.0,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:C/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2014-7209"
    },
    {
      "cve": "CVE-2015-20107",
      "cwe": {
        "id": "CWE-77",
        "name": "Improper Neutralization of Special Elements used in a Command (\u0027Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python (aka CPython) up to 3.10.8, the mailcap module does not add escape characters into commands discovered in the system mailcap file. This may allow attackers to inject shell commands into applications that call mailcap.findmatch with untrusted input (if they lack validation of user-provided filenames or arguments). The fix is also back-ported to 3.7, 3.8, 3.9",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:H/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2015-20107"
    },
    {
      "cve": "CVE-2016-3189",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Use-after-free vulnerability in bzip2recover in bzip2 1.0.6 allows remote attackers to cause a denial of service (crash) via a crafted bzip2 file, related to block ends set to before the start of the block.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2016-3189"
    },
    {
      "cve": "CVE-2016-3709",
      "cwe": {
        "id": "CWE-79",
        "name": "Improper Neutralization of Input During Web Page Generation (\u0027Cross-site Scripting\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Possible cross-site scripting vulnerability in libxml after commit 960f0e2.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2016-3709"
    },
    {
      "cve": "CVE-2016-4658",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xpointer.c in libxml2 before 2.9.5 (as used in Apple iOS before 10, OS X before 10.12, tvOS before 10, and watchOS before 3, and other products) does not forbid namespace nodes in XPointer ranges, which allows remote attackers to execute arbitrary code or cause a denial of service (use-after-free and memory corruption) via a crafted XML document.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2016-4658"
    },
    {
      "cve": "CVE-2016-5131",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Use-after-free vulnerability in libxml2 through 2.9.4, as used in Google Chrome before 52.0.2743.82, allows remote attackers to cause a denial of service or possibly have unspecified other impact via vectors related to the XPointer range-to function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2016-5131"
    },
    {
      "cve": "CVE-2016-9318",
      "cwe": {
        "id": "CWE-611",
        "name": "Improper Restriction of XML External Entity Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 2.9.4 and earlier, as used in XMLSec 1.2.23 and earlier and other products, does not offer a flag directly indicating that the current document may be read but other files may not be opened, which makes it easier for remote attackers to conduct XML External Entity (XXE) attacks via a crafted document.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2016-9318"
    },
    {
      "cve": "CVE-2016-10228",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv program in the GNU C Library (aka glibc or libc6) 2.31 and earlier, when invoked with multiple suffixes in the destination encoding (TRANSLATE or IGNORE) along with the -c option, enters an infinite loop when processing invalid multi-byte input sequences, leading to a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2016-10228"
    },
    {
      "cve": "CVE-2016-10739",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the GNU C Library (aka glibc or libc6) through 2.28, the getaddrinfo function would successfully parse a string that contained an IPv4 address followed by whitespace and arbitrary characters, which could lead applications to incorrectly assume that it had parsed a valid string, without the possibility of embedded HTTP headers or other potentially dangerous substrings.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2016-10739"
    },
    {
      "cve": "CVE-2017-0663",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A remote code execution vulnerability in libxml2 could enable an attacker using a specially crafted file to execute arbitrary code within the context of an unprivileged process. This issue is rated as High due to the possibility of remote code execution in an application that uses this library. Product: Android. Versions: 4.4.4, 5.0.2, 5.1.1, 6.0, 6.0.1, 7.0, 7.1.1, 7.1.2. Android ID: A-37104170.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-0663"
    },
    {
      "cve": "CVE-2017-7375",
      "cwe": {
        "id": "CWE-611",
        "name": "Improper Restriction of XML External Entity Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw in libxml2 allows remote XML entity inclusion with default parser flags (i.e., when the caller did not request entity substitution, DTD validation, external DTD subset loading, or default DTD attributes). Depending on the context, this may expose a higher-risk attack surface in libxml2 not usually reachable with default parser flags, and expose content from local files, HTTP, or FTP servers (which might be otherwise unreachable).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-7375"
    },
    {
      "cve": "CVE-2017-7376",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer overflow in libxml2 allows remote attackers to execute arbitrary code by leveraging an incorrect limit for port values when handling redirects.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-7376"
    },
    {
      "cve": "CVE-2017-9047",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A buffer overflow was discovered in libxml2 20904-GITv2.9.4-16-g0741801. The function xmlSnprintfElementContent in valid.c is supposed to recursively dump the element content definition into a char buffer \u0027buf\u0027 of size \u0027size\u0027. The variable len is assigned strlen(buf). If the content-\u003etype is XML_ELEMENT_CONTENT_ELEMENT, then (i) the content-\u003eprefix is appended to buf (if it actually fits) whereupon (ii) content-\u003ename is written to the buffer. However, the check for whether the content-\u003ename actually fits also uses \u0027len\u0027 rather than the updated buffer length strlen(buf). This allows us to write about \"size\" many bytes beyond the allocated memory. This vulnerability causes programs that use libxml2, such as PHP, to crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-9047"
    },
    {
      "cve": "CVE-2017-9048",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a stack-based buffer overflow. The function xmlSnprintfElementContent in valid.c is supposed to recursively dump the element content definition into a char buffer \u0027buf\u0027 of size \u0027size\u0027. At the end of the routine, the function may strcat two more characters without checking whether the current strlen(buf) + 2 \u003c size. This vulnerability causes programs that use libxml2, such as PHP, to crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-9048"
    },
    {
      "cve": "CVE-2017-9049",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a heap-based buffer over-read in the xmlDictComputeFastKey function in dict.c. This vulnerability causes programs that use libxml2, such as PHP, to crash. This vulnerability exists because of an incomplete fix for libxml2 Bug 759398.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-9049"
    },
    {
      "cve": "CVE-2017-9050",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a heap-based buffer over-read in the xmlDictAddString function in dict.c. This vulnerability causes programs that use libxml2, such as PHP, to crash. This vulnerability exists because of an incomplete fix for CVE-2016-1839.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-9050"
    },
    {
      "cve": "CVE-2017-16931",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "parser.c in libxml2 before 2.9.5 mishandles parameter-entity references because the NEXTL macro calls the xmlParserHandlePEReference function in the case of a \u0027%\u0027 character in a DTD name.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-16931"
    },
    {
      "cve": "CVE-2017-16932",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "parser.c in libxml2 before 2.9.5 does not prevent infinite recursion in parameter entities.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-16932"
    },
    {
      "cve": "CVE-2017-17512",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "sensible-browser in sensible-utils before 0.0.11 does not validate strings before launching the program specified by the BROWSER environment variable, which allows remote attackers to conduct argument-injection attacks via a crafted URL, as demonstrated by a --proxy-pac-file argument.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-17512"
    },
    {
      "cve": "CVE-2017-18258",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The xz_head function in xzlib.c in libxml2 before 2.9.6 allows remote attackers to cause a denial of service (memory consumption) via a crafted LZMA file, because the decoder functionality does not restrict memory usage to what is required for a legitimate file.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-18258"
    },
    {
      "cve": "CVE-2018-0495",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Libgcrypt before 1.7.10 and 1.8.x before 1.8.3 allows a memory-cache side-channel attack on ECDSA signatures that can be mitigated through the use of blinding during the signing process in the _gcry_ecc_ecdsa_sign function in cipher/ecc-ecdsa.c, aka the Return Of the Hidden Number Problem or ROHNP. To discover an ECDSA key, the attacker needs access to either the local machine or a different virtual machine on the same physical host.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-0495"
    },
    {
      "cve": "CVE-2018-12886",
      "cwe": {
        "id": "CWE-209",
        "name": "Generation of Error Message Containing Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "stack_protect_prologue in cfgexpand.c and stack_protect_epilogue in function.c in GNU Compiler Collection (GCC) 4.1 through 8 (under certain circumstances) generate instruction sequences when targeting ARM targets that spill the address of the stack protector guard, which allows an attacker to bypass the protection of -fstack-protector, -fstack-protector-all, -fstack-protector-strong, and -fstack-protector-explicit against stack overflow by controlling what the stack canary is compared against.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-12886"
    },
    {
      "cve": "CVE-2018-14404",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference vulnerability exists in the xpath.c:xmlXPathCompOpEval() function of libxml2 through 2.9.8 when parsing an invalid XPath expression in the XPATH_OP_AND or XPATH_OP_OR case. Applications processing untrusted XSL format inputs with the use of the libxml2 library may be vulnerable to a denial of service attack due to a crash of the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-14404"
    },
    {
      "cve": "CVE-2018-14567",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 2.9.8, if --with-lzma is used, allows remote attackers to cause a denial of service (infinite loop) via a crafted XML file that triggers LZMA_MEMLIMIT_ERROR, as demonstrated by xmllint, a different vulnerability than CVE-2015-8035 and CVE-2018-9251.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-14567"
    },
    {
      "cve": "CVE-2018-18928",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "International Components for Unicode (ICU) for C/C++ 63.1 has an integer overflow in number::impl::DecimalQuantity::toScientificString() in i18n/number_decimalquantity.cpp.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-18928"
    },
    {
      "cve": "CVE-2018-19591",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the GNU C Library (aka glibc or libc6) through 2.28, attempting to resolve a crafted hostname via getaddrinfo() leads to the allocation of a socket descriptor that is not closed. This is related to the if_nametoindex() function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-19591"
    },
    {
      "cve": "CVE-2018-20482",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU Tar through 1.30, when --sparse is used, mishandles file shrinkage during read access, which allows local users to cause a denial of service (infinite read loop in sparse_dump_region in sparse.c) by modifying a file that is supposed to be archived by a different user\u0027s process (e.g., a system backup running as root).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-20482"
    },
    {
      "cve": "CVE-2018-20843",
      "cwe": {
        "id": "CWE-611",
        "name": "Improper Restriction of XML External Entity Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libexpat in Expat before 2.2.7, XML input including XML names that contain a large number of colons could make the XML parser consume a high amount of RAM and CPU resources while processing (enough to be usable for denial-of-service attacks).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-20843"
    },
    {
      "cve": "CVE-2018-25032",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "zlib before 1.2.12 allows memory corruption when deflating (i.e., when compressing) if the input has many distant matches.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-25032"
    },
    {
      "cve": "CVE-2019-3855",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow flaw which could lead to an out of bounds write was discovered in libssh2 before 1.8.1 in the way packets are read from the server. A remote attacker who compromises a SSH server may be able to execute code on the client system when a user connects to the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3855"
    },
    {
      "cve": "CVE-2019-3856",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow flaw, which could lead to an out of bounds write, was discovered in libssh2 before 1.8.1 in the way keyboard prompt requests are parsed. A remote attacker who compromises a SSH server may be able to execute code on the client system when a user connects to the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3856"
    },
    {
      "cve": "CVE-2019-3857",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow flaw which could lead to an out of bounds write was discovered in libssh2 before 1.8.1 in the way SSH_MSG_CHANNEL_REQUEST packets with an exit signal are parsed. A remote attacker who compromises a SSH server may be able to execute code on the client system when a user connects to the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3857"
    },
    {
      "cve": "CVE-2019-3858",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 when a specially crafted SFTP packet is received from the server. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3858"
    },
    {
      "cve": "CVE-2019-3859",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the _libssh2_packet_require and _libssh2_packet_requirev functions. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3859"
    },
    {
      "cve": "CVE-2019-3860",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the way SFTP packets with empty payloads are parsed. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3860"
    },
    {
      "cve": "CVE-2019-3861",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the way SSH packets with a padding length value greater than the packet length are parsed. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3861"
    },
    {
      "cve": "CVE-2019-3862",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the way SSH_MSG_CHANNEL_REQUEST packets with an exit status message and no payload are parsed. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3862"
    },
    {
      "cve": "CVE-2019-3863",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in libssh2 before 1.8.1. A server could send a multiple keyboard interactive response messages whose total length are greater than unsigned char max characters. This value is used as an index to copy memory causing in an out of bounds memory write error.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3863"
    },
    {
      "cve": "CVE-2019-5018",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An exploitable use after free vulnerability exists in the window function functionality of Sqlite3 3.26.0. A specially crafted SQL command can cause a use after free vulnerability, potentially resulting in remote code execution. An attacker can send a malicious SQL command to trigger this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-5018"
    },
    {
      "cve": "CVE-2019-5094",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An exploitable code execution vulnerability exists in the quota file functionality of E2fsprogs 1.45.3. A specially crafted ext4 partition can cause an out-of-bounds write on the heap, resulting in code execution. An attacker can corrupt a partition to trigger this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-5094"
    },
    {
      "cve": "CVE-2019-5188",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A code execution vulnerability exists in the directory rehashing functionality of E2fsprogs e2fsck 1.45.4. A specially crafted ext4 directory can cause an out-of-bounds write on the stack, resulting in code execution. An attacker can corrupt a partition to trigger this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-5188"
    },
    {
      "cve": "CVE-2019-5435",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow in curl\u0027s URL API results in a buffer overflow in libcurl 7.62.0 to and including 7.64.1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-5435"
    },
    {
      "cve": "CVE-2019-5436",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap buffer overflow in the TFTP receiving code allows for DoS or arbitrary code execution in libcurl versions 7.19.4 through 7.64.1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-5436"
    },
    {
      "cve": "CVE-2019-5443",
      "cwe": {
        "id": "CWE-427",
        "name": "Uncontrolled Search Path Element"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A non-privileged user or program can put code and a config file in a known non-privileged path (under C:/usr/local/) that will make curl \u003c= 7.65.1 automatically run the code (as an openssl \"engine\") on invocation. If that curl is invoked by a privileged user it can do anything it wants.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-5443"
    },
    {
      "cve": "CVE-2019-5481",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Double-free vulnerability in the FTP-kerberos code in cURL 7.52.0 to 7.65.3.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-5481"
    },
    {
      "cve": "CVE-2019-5482",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Heap buffer overflow in the TFTP protocol handler in cURL 7.19.4 to 7.65.3.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-5482"
    },
    {
      "cve": "CVE-2019-6109",
      "cwe": {
        "id": "CWE-116",
        "name": "Improper Encoding or Escaping of Output"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in OpenSSH 7.9. Due to missing character encoding in the progress display, a malicious server (or Man-in-The-Middle attacker) can employ crafted object names to manipulate the client output, e.g., by using ANSI control codes to hide additional files being transferred. This affects refresh_progress_meter() in progressmeter.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-6109"
    },
    {
      "cve": "CVE-2019-6110",
      "cwe": {
        "id": "CWE-838",
        "name": "Inappropriate Encoding for Output Context"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In OpenSSH 7.9, due to accepting and displaying arbitrary stderr output from the server, a malicious server (or Man-in-The-Middle attacker) can manipulate the client output, for example to use ANSI control codes to hide additional files being transferred.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-6110"
    },
    {
      "cve": "CVE-2019-6111",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in OpenSSH 7.9. Due to the scp implementation being derived from 1983 rcp, the server chooses which files/directories are sent to the client. However, the scp client only performs cursory validation of the object name returned (only directory traversal attacks are prevented). A malicious scp server (or Man-in-The-Middle attacker) can overwrite arbitrary files in the scp client target directory. If recursive operation (-r) is performed, the server can manipulate subdirectories as well (for example, to overwrite the .ssh/authorized_keys file).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-6111"
    },
    {
      "cve": "CVE-2019-6488",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The string component in the GNU C Library (aka glibc or libc6) through 2.28, when running on the x32 architecture, incorrectly attempts to use a 64-bit register for size_t in assembly codes, which can lead to a segmentation fault or possibly unspecified other impact, as demonstrated by a crash in __memmove_avx_unaligned_erms in sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S during a memcpy.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-6488"
    },
    {
      "cve": "CVE-2019-7309",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the GNU C Library (aka glibc or libc6) through 2.29, the memcmp function for the x32 architecture can incorrectly return zero (indicating that the inputs are equal) because the RDX most significant bit is mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-7309"
    },
    {
      "cve": "CVE-2019-8457",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite3 from 3.6.0 to and including 3.27.2 is vulnerable to heap out-of-bound read in the rtreenode() function when handling invalid rtree tables.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-8457"
    },
    {
      "cve": "CVE-2019-9169",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the GNU C Library (aka glibc or libc6) through 2.29, proceed_next_node in posix/regexec.c has a heap-based buffer over-read via an attempted case-insensitive regular-expression match.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9169"
    },
    {
      "cve": "CVE-2019-9636",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Python 2.7.x through 2.7.16 and 3.x through 3.7.2 is affected by: Improper Handling of Unicode Encoding (with an incorrect netloc) during NFKC normalization. The impact is: Information disclosure (credentials, cookies, etc. that are cached against a given hostname). The components are: urllib.parse.urlsplit, urllib.parse.urlparse. The attack vector is: A specially crafted URL could be incorrectly parsed to locate cookies or authentication data and send that information to a different host than when parsed correctly. This is fixed in: v2.7.17, v2.7.17rc1, v2.7.18, v2.7.18rc1; v3.5.10, v3.5.10rc1, v3.5.7, v3.5.8, v3.5.8rc1, v3.5.8rc2, v3.5.9; v3.6.10, v3.6.10rc1, v3.6.11, v3.6.11rc1, v3.6.12, v3.6.9, v3.6.9rc1; v3.7.3, v3.7.3rc1, v3.7.4, v3.7.4rc1, v3.7.4rc2, v3.7.5, v3.7.5rc1, v3.7.6, v3.7.6rc1, v3.7.7, v3.7.7rc1, v3.7.8, v3.7.8rc1, v3.7.9.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9636"
    },
    {
      "cve": "CVE-2019-9674",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Lib/zipfile.py in Python through 3.7.2 allows remote attackers to cause a denial of service (resource consumption) via a ZIP bomb.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9674"
    },
    {
      "cve": "CVE-2019-9740",
      "cwe": {
        "id": "CWE-93",
        "name": "Improper Neutralization of CRLF Sequences (\u0027CRLF Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in urllib2 in Python 2.x through 2.7.16 and urllib in Python 3.x through 3.7.3. CRLF injection is possible if the attacker controls a url parameter, as demonstrated by the first argument to urllib.request.urlopen with \\r\\n (specifically in the query string after a ? character) followed by an HTTP header or a Redis command. This is fixed in: v2.7.17, v2.7.17rc1, v2.7.18, v2.7.18rc1; v3.5.10, v3.5.10rc1, v3.5.8, v3.5.8rc1, v3.5.8rc2, v3.5.9; v3.6.10, v3.6.10rc1, v3.6.11, v3.6.11rc1, v3.6.12, v3.6.9, v3.6.9rc1; v3.7.4, v3.7.4rc1, v3.7.4rc2, v3.7.5, v3.7.5rc1, v3.7.6, v3.7.6rc1, v3.7.7, v3.7.7rc1, v3.7.8, v3.7.8rc1, v3.7.9.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9740"
    },
    {
      "cve": "CVE-2019-9923",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "pax_decode_header in sparse.c in GNU Tar before 1.32 had a NULL pointer dereference when parsing certain archives that have malformed extended headers.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9923"
    },
    {
      "cve": "CVE-2019-9936",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.27.2, running fts5 prefix queries inside a transaction could trigger a heap-based buffer over-read in fts5HashEntrySort in sqlite3.c, which may lead to an information leak. This is related to ext/fts5/fts5_hash.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9936"
    },
    {
      "cve": "CVE-2019-9937",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.27.2, interleaving reads and writes in a single transaction with an fts5 virtual table will lead to a NULL Pointer Dereference in fts5ChunkIterate in sqlite3.c. This is related to ext/fts5/fts5_hash.c and ext/fts5/fts5_index.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9937"
    },
    {
      "cve": "CVE-2019-9947",
      "cwe": {
        "id": "CWE-93",
        "name": "Improper Neutralization of CRLF Sequences (\u0027CRLF Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in urllib2 in Python 2.x through 2.7.16 and urllib in Python 3.x through 3.7.3. CRLF injection is possible if the attacker controls a url parameter, as demonstrated by the first argument to urllib.request.urlopen with \\r\\n (specifically in the path component of a URL that lacks a ? character) followed by an HTTP header or a Redis command. This is similar to the CVE-2019-9740 query string issue. This is fixed in: v2.7.17, v2.7.17rc1, v2.7.18, v2.7.18rc1; v3.5.10, v3.5.10rc1, v3.5.8, v3.5.8rc1, v3.5.8rc2, v3.5.9; v3.6.10, v3.6.10rc1, v3.6.11, v3.6.11rc1, v3.6.12, v3.6.9, v3.6.9rc1; v3.7.4, v3.7.4rc1, v3.7.4rc2, v3.7.5, v3.7.5rc1, v3.7.6, v3.7.6rc1, v3.7.7, v3.7.7rc1, v3.7.8, v3.7.8rc1, v3.7.9.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9947"
    },
    {
      "cve": "CVE-2019-9948",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "urllib in Python 2.x through 2.7.16 supports the local_file: scheme, which makes it easier for remote attackers to bypass protection mechanisms that blacklist file: URIs, as demonstrated by triggering a urllib.urlopen(\u0027local_file:///etc/passwd\u0027) call.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9948"
    },
    {
      "cve": "CVE-2019-10160",
      "cwe": {
        "id": "CWE-172",
        "name": "Encoding Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security regression of CVE-2019-9636 was discovered in python since commit d537ab0ff9767ef024f26246899728f0116b1ec3 affecting versions 2.7, 3.5, 3.6, 3.7 and from v3.8.0a4 through v3.8.0b1, which still allows an attacker to exploit CVE-2019-9636 by abusing the user and password parts of a URL. When an application parses user-supplied URLs to store cookies, authentication credentials, or other kind of information, it is possible for an attacker to provide specially crafted URLs to make the application locate host-related information (e.g. cookies, authentication data) and send them to a different host than where it should, unlike if the URLs had been correctly parsed. The result of an attack may vary based on the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-10160"
    },
    {
      "cve": "CVE-2019-11360",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A buffer overflow in iptables-restore in netfilter iptables 1.8.2 allows an attacker to (at least) crash the program or potentially gain code execution via a specially crafted iptables-save file. This is related to add_param_to_argv in xshared.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.2,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-11360"
    },
    {
      "cve": "CVE-2019-12290",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU libidn2 before 2.2.0 fails to perform the roundtrip checks specified in RFC3490 Section 4.2 when converting A-labels to U-labels. This makes it possible in some circumstances for one domain to impersonate another. By creating a malicious domain that matches a target domain except for the inclusion of certain punycoded Unicode characters (that would be discarded when converted first to a Unicode label and then back to an ASCII label), arbitrary domains can be impersonated.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-12290"
    },
    {
      "cve": "CVE-2019-12900",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "BZ2_decompress in decompress.c in bzip2 through 1.0.6 has an out-of-bounds write when there are many selectors.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-12900"
    },
    {
      "cve": "CVE-2019-12904",
      "cwe": {
        "id": "CWE-668",
        "name": "Exposure of Resource to Wrong Sphere"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Libgcrypt 1.8.4, the C implementation of AES is vulnerable to a flush-and-reload side-channel attack because physical addresses are available to other processes. (The C implementation is used on platforms where an assembly-language implementation is unavailable.) NOTE: the vendor\u0027s position is that the issue report cannot be validated because there is no description of an attack",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-12904"
    },
    {
      "cve": "CVE-2019-13057",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the server in OpenLDAP before 2.4.48. When the server administrator delegates rootDN (database admin) privileges for certain databases but wants to maintain isolation (e.g., for multi-tenant deployments), slapd does not properly stop a rootDN from requesting authorization as an identity from another database during a SASL bind or with a proxyAuthz (RFC 4370) control. (It is not a common configuration to deploy a system where the server administrator and a DB administrator enjoy different levels of trust.)",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-13057"
    },
    {
      "cve": "CVE-2019-13565",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in OpenLDAP 2.x before 2.4.48. When using SASL authentication and session encryption, and relying on the SASL security layers in slapd access controls, it is possible to obtain access that would otherwise be denied via a simple bind for any identity covered in those ACLs. After the first SASL bind is completed, the sasl_ssf value is retained for all new non-SASL connections. Depending on the ACL configuration, this can affect different types of operations (searches, modifications, etc.). In other words, a successful authorization step completed by one user affects the authorization requirement for a different user.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-13565"
    },
    {
      "cve": "CVE-2019-13627",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "It was discovered that there was a ECDSA timing attack in the libgcrypt20 cryptographic library. Version affected: 1.8.4-5, 1.7.6-2+deb9u3, and 1.6.3-2+deb8u4. Versions fixed: 1.8.5-2 and 1.6.3-2+deb8u7.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-13627"
    },
    {
      "cve": "CVE-2019-15847",
      "cwe": {
        "id": "CWE-331",
        "name": "Insufficient Entropy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The POWER9 backend in GNU Compiler Collection (GCC) before version 10 could optimize multiple calls of the __builtin_darn intrinsic into a single call, thus reducing the entropy of the random number generator. This occurred because a volatile operation was not specified. For example, within a single execution of a program, the output of every __builtin_darn() call may be the same.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-15847"
    },
    {
      "cve": "CVE-2019-15903",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libexpat before 2.2.8, crafted XML input could fool the parser into changing from DTD parsing to document parsing too early; a consecutive call to XML_GetCurrentLineNumber (or XML_GetCurrentColumnNumber) then resulted in a heap-based buffer over-read.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-15903"
    },
    {
      "cve": "CVE-2019-16056",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in Python through 2.7.16, 3.x through 3.5.7, 3.6.x through 3.6.9, and 3.7.x through 3.7.4. The email module wrongly parses email addresses that contain multiple @ characters. An application that uses the email module and implements some kind of checks on the From/To headers of a message could be tricked into accepting an email address that should be denied. An attack may be the same as in CVE-2019-11340; however, this CVE applies to Python more generally.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-16056"
    },
    {
      "cve": "CVE-2019-16168",
      "cwe": {
        "id": "CWE-369",
        "name": "Divide By Zero"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite through 3.29.0, whereLoopAddBtreeIndex in sqlite3.c can crash a browser or other application because of missing validation of a sqlite_stat1 sz field, aka a \"severe division by zero in the query planner.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-16168"
    },
    {
      "cve": "CVE-2019-16905",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "OpenSSH 7.7 through 7.9 and 8.x before 8.1, when compiled with an experimental key type, has a pre-authentication integer overflow if a client or server is configured to use a crafted XMSS key. This leads to memory corruption and local code execution because of an error in the XMSS key parsing algorithm. NOTE: the XMSS implementation is considered experimental in all released OpenSSH versions, and there is no supported way to enable it when building portable OpenSSH.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-16905"
    },
    {
      "cve": "CVE-2019-17498",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libssh2 v1.9.0 and earlier versions, the SSH_MSG_DISCONNECT logic in packet.c has an integer overflow in a bounds check, enabling an attacker to specify an arbitrary (out-of-bounds) offset for a subsequent memory read. A crafted SSH server may be able to disclose sensitive information or cause a denial of service condition on the client system when a user connects to the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-17498"
    },
    {
      "cve": "CVE-2019-17543",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "LZ4 before 1.9.2 has a heap-based buffer overflow in LZ4_write32 (related to LZ4_compress_destSize), affecting applications that call LZ4_compress_fast with a large input. (This issue can also lead to data corruption.) NOTE: the vendor states \"only a few specific / uncommon usages of the API are at risk.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-17543"
    },
    {
      "cve": "CVE-2019-17594",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a heap-based buffer over-read in the _nc_find_entry function in tinfo/comp_hash.c in the terminfo library in ncurses before 6.1-20191012.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-17594"
    },
    {
      "cve": "CVE-2019-17595",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a heap-based buffer over-read in the fmt_entry function in tinfo/comp_hash.c in the terminfo library in ncurses before 6.1-20191012.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:L/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-17595"
    },
    {
      "cve": "CVE-2019-18224",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "idn2_to_ascii_4i in lib/lookup.c in GNU libidn2 before 2.1.1 has a heap-based buffer overflow via a long domain string.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-18224"
    },
    {
      "cve": "CVE-2019-18276",
      "cwe": {
        "id": "CWE-273",
        "name": "Improper Check for Dropped Privileges"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in disable_priv_mode in shell.c in GNU Bash through 5.0 patch 11. By default, if Bash is run with its effective UID not equal to its real UID, it will drop privileges by setting its effective UID to its real UID. However, it does so incorrectly. On Linux and other systems that support \"saved UID\" functionality, the saved UID is not dropped. An attacker with command execution in the shell can use \"enable -f\" for runtime loading of a new builtin, which can be a shared object that calls setuid() and therefore regains privileges. However, binaries running with an effective UID of 0 are unaffected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-18276"
    },
    {
      "cve": "CVE-2019-18348",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in urllib2 in Python 2.x through 2.7.17 and urllib in Python 3.x through 3.8.0. CRLF injection is possible if the attacker controls a url parameter, as demonstrated by the first argument to urllib.request.urlopen with \\r\\n (specifically in the host component of a URL) followed by an HTTP header. This is similar to the CVE-2019-9740 query string issue and the CVE-2019-9947 path string issue. (This is not exploitable when glibc has CVE-2016-10739 fixed.). This is fixed in: v2.7.18, v2.7.18rc1; v3.5.10, v3.5.10rc1; v3.6.11, v3.6.11rc1, v3.6.12; v3.7.8, v3.7.8rc1, v3.7.9; v3.8.3, v3.8.3rc1, v3.8.4, v3.8.4rc1, v3.8.5, v3.8.6, v3.8.6rc1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-18348"
    },
    {
      "cve": "CVE-2019-19126",
      "cwe": {
        "id": "CWE-665",
        "name": "Improper Initialization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "On the x86-64 architecture, the GNU C Library (aka glibc) before 2.31 fails to ignore the LD_PREFER_MAP_32BIT_EXEC environment variable during program execution after a security transition, allowing local attackers to restrict the possible mapping addresses for loaded libraries and thus bypass ASLR for a setuid program.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19126"
    },
    {
      "cve": "CVE-2019-19242",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 3.30.1 mishandles pExpr-\u003ey.pTab, as demonstrated by the TK_COLUMN case in sqlite3ExprCodeTarget in expr.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19242"
    },
    {
      "cve": "CVE-2019-19244",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Select in select.c in SQLite 3.30.1 allows a crash if a sub-select uses both DISTINCT and window functions, and also has certain ORDER BY usage.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19244"
    },
    {
      "cve": "CVE-2019-19317",
      "cwe": {
        "id": "CWE-681",
        "name": "Incorrect Conversion between Numeric Types"
      },
      "notes": [
        {
          "category": "summary",
          "text": "lookupName in resolve.c in SQLite 3.30.1 omits bits from the colUsed bitmask in the case of a generated column, which allows attackers to cause a denial of service or possibly have unspecified other impact.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19317"
    },
    {
      "cve": "CVE-2019-19603",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 3.30.1 mishandles certain SELECT statements with a nonexistent VIEW, leading to an application crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19603"
    },
    {
      "cve": "CVE-2019-19645",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "alter.c in SQLite through 3.30.1 allows attackers to trigger infinite recursion via certain types of self-referential views in conjunction with ALTER TABLE statements.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19645"
    },
    {
      "cve": "CVE-2019-19646",
      "cwe": {
        "id": "CWE-754",
        "name": "Improper Check for Unusual or Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "pragma.c in SQLite through 3.30.1 mishandles NOT NULL in an integrity_check PRAGMA command in certain cases of generated columns.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19646"
    },
    {
      "cve": "CVE-2019-19880",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "exprListAppendList in window.c in SQLite 3.30.1 allows attackers to trigger an invalid pointer dereference because constant integer values in ORDER BY clauses of window definitions are mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19880"
    },
    {
      "cve": "CVE-2019-19906",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "cyrus-sasl (aka Cyrus SASL) 2.1.27 has an out-of-bounds write leading to unauthenticated remote denial-of-service in OpenLDAP via a malformed LDAP packet. The OpenLDAP crash is ultimately caused by an off-by-one error in _sasl_add_string in common.c in cyrus-sasl.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19906"
    },
    {
      "cve": "CVE-2019-19923",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "flattenSubquery in select.c in SQLite 3.30.1 mishandles certain uses of SELECT DISTINCT involving a LEFT JOIN in which the right-hand side is a view. This can cause a NULL pointer dereference (or incorrect results).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19923"
    },
    {
      "cve": "CVE-2019-19924",
      "cwe": {
        "id": "CWE-755",
        "name": "Improper Handling of Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 3.30.1 mishandles certain parser-tree rewriting, related to expr.c, vdbeaux.c, and window.c. This is caused by incorrect sqlite3WindowRewrite() error handling.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19924"
    },
    {
      "cve": "CVE-2019-19925",
      "cwe": {
        "id": "CWE-434",
        "name": "Unrestricted Upload of File with Dangerous Type"
      },
      "notes": [
        {
          "category": "summary",
          "text": "zipfileUpdate in ext/misc/zipfile.c in SQLite 3.30.1 mishandles a NULL pathname during an update of a ZIP archive.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19925"
    },
    {
      "cve": "CVE-2019-19926",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "multiSelect in select.c in SQLite 3.30.1 mishandles certain errors during parsing, as demonstrated by errors from sqlite3WindowRewrite() calls. NOTE: this vulnerability exists because of an incomplete fix for CVE-2019-19880.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19926"
    },
    {
      "cve": "CVE-2019-19956",
      "cwe": {
        "id": "CWE-772",
        "name": "Missing Release of Resource after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmlParseBalancedChunkMemoryRecover in parser.c in libxml2 before 2.9.10 has a memory leak related to newDoc-\u003eoldNs.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19956"
    },
    {
      "cve": "CVE-2019-19959",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ext/misc/zipfile.c in SQLite 3.30.1 mishandles certain uses of INSERT INTO in situations involving embedded \u0027\\0\u0027 characters in filenames, leading to a memory-management error that can be detected by (for example) valgrind.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19959"
    },
    {
      "cve": "CVE-2019-20218",
      "cwe": {
        "id": "CWE-755",
        "name": "Improper Handling of Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "selectExpander in select.c in SQLite 3.30.1 proceeds with WITH stack unwinding even after a parsing error.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-20218"
    },
    {
      "cve": "CVE-2019-20367",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nlist.c in libbsd before 0.10.0 has an out-of-bounds read during a comparison for a symbol name from the string table (strtab).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-20367"
    },
    {
      "cve": "CVE-2019-20388",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmlSchemaPreRun in xmlschemas.c in libxml2 2.9.10 allows an xmlSchemaValidateStream memory leak.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-20388"
    },
    {
      "cve": "CVE-2019-20795",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "iproute2 before 5.1.0 has a use-after-free in get_netnsid_from_name in ip/ipnetns.c. NOTE: security relevance may be limited to certain uses of setuid that, although not a default, are sometimes a configuration option offered to end users. Even when setuid is used, other factors (such as C library configuration) may block exploitability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-20795"
    },
    {
      "cve": "CVE-2019-20907",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Lib/tarfile.py in Python through 3.8.3, an attacker is able to craft a TAR archive leading to an infinite loop when opened by tarfile.open, because _proc_pax lacks header validation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-20907"
    },
    {
      "cve": "CVE-2019-25013",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv feature in the GNU C Library (aka glibc or libc6) through 2.32, when processing invalid multi-byte input sequences in the EUC-KR encoding, may have a buffer over-read.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-25013"
    },
    {
      "cve": "CVE-2019-1010022",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** GNU Libc current is affected by: Mitigation bypass. The impact is: Attacker may bypass stack guard protection. The component is: nptl. The attack vector is: Exploit stack buffer overflow vulnerability and use this bypass vulnerability to bypass stack guard. NOTE: Upstream comments indicate \"this is being treated as a non-security bug and no real threat.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-1010022"
    },
    {
      "cve": "CVE-2019-1010023",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** GNU Libc current is affected by: Re-mapping current loaded library with malicious ELF file. The impact is: In worst case attacker may evaluate privileges. The component is: libld. The attack vector is: Attacker sends 2 ELF files to victim and asks to run ldd on it. ldd execute code. NOTE: Upstream comments indicate \"this is being treated as a non-security bug and no real threat.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-1010023"
    },
    {
      "cve": "CVE-2019-1010024",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** GNU Libc current is affected by: Mitigation bypass. The impact is: Attacker may bypass ASLR using cache of thread stack and heap. The component is: glibc. NOTE: Upstream comments indicate \"this is being treated as a non-security bug and no real threat.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-1010024"
    },
    {
      "cve": "CVE-2019-1010025",
      "cwe": {
        "id": "CWE-330",
        "name": "Use of Insufficiently Random Values"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** GNU Libc current is affected by: Mitigation bypass. The impact is: Attacker may guess the heap addresses of pthread_created thread. The component is: glibc. NOTE: the vendor\u0027s position is \"ASLR bypass itself is not a vulnerability.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-1010025"
    },
    {
      "cve": "CVE-2019-1010180",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU gdb All versions is affected by: Buffer Overflow - Out of bound memory access. The impact is: Deny of Service, Memory Disclosure, and Possible Code Execution. The component is: The main gdb module. The attack vector is: Open an ELF for debugging. The fixed version is: Not fixed yet.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-1010180"
    },
    {
      "cve": "CVE-2020-1712",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap use-after-free vulnerability was found in systemd before version v245-rc1, where asynchronous Polkit queries are performed while handling dbus messages. A local unprivileged attacker can abuse this flaw to crash systemd services or potentially execute code and elevate their privileges, by sending specially crafted dbus messages.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-1712"
    },
    {
      "cve": "CVE-2020-1751",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds write vulnerability was found in glibc before 2.31 when handling signal trampolines on PowerPC. Specifically, the backtrace function did not properly check the array bounds when storing the frame address, resulting in a denial of service or potential code execution. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-1751"
    },
    {
      "cve": "CVE-2020-1752",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability introduced in glibc upstream version 2.14 was found in the way the tilde expansion was carried out. Directory paths containing an initial tilde followed by a valid username were affected by this issue. A local attacker could exploit this flaw by creating a specially crafted path that, when processed by the glob function, would potentially lead to arbitrary code execution. This was fixed in version 2.32.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-1752"
    },
    {
      "cve": "CVE-2020-6096",
      "cwe": {
        "id": "CWE-195",
        "name": "Signed to Unsigned Conversion Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An exploitable signed comparison vulnerability exists in the ARMv7 memcpy() implementation of GNU glibc 2.30.9000. Calling memcpy() (on ARMv7 targets that utilize the GNU glibc implementation) with a negative value for the \u0027num\u0027 parameter results in a signed comparison vulnerability. If an attacker underflows the \u0027num\u0027 parameter to memcpy(), this vulnerability could lead to undefined behavior such as writing to out-of-bounds memory and potentially remote code execution. Furthermore, this memcpy() implementation allows for program execution to continue in scenarios where a segmentation fault or crash should have occurred. The dangers occur in that subsequent execution and iterations of this code will be executed with this corrupted data.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-6096"
    },
    {
      "cve": "CVE-2020-7595",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmlStringLenDecodeEntities in parser.c in libxml2 2.9.10 has an infinite loop in a certain end-of-file situation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-7595"
    },
    {
      "cve": "CVE-2020-8169",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The libcurl library versions 7.62.0 to and including  7.70.0 are vulnerable to an information disclosure vulnerability that can lead to a partial password being leaked over the network and to the DNS server(s).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-8169"
    },
    {
      "cve": "CVE-2020-8177",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.20.0 through 7.70.0 is vulnerable to improper restriction of names for files and other resources that can lead too overwriting a local file when the -J flag is used.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-8177"
    },
    {
      "cve": "CVE-2020-8231",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Due to use of a dangling pointer, libcurl 7.29.0 through 7.71.1 can use the wrong connection when sending data.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-8231"
    },
    {
      "cve": "CVE-2020-8284",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A malicious server can use the FTP PASV response to trick curl 7.73.0 and earlier into connecting back to a given IP address and port, and this way potentially make curl extract information about services that are otherwise private and not disclosed, for example doing port scanning and service banner extractions.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-8284"
    },
    {
      "cve": "CVE-2020-8285",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.21.0 to and including 7.73.0 is vulnerable to uncontrolled recursion due to a stack overflow issue in FTP wildcard match parsing.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-8285"
    },
    {
      "cve": "CVE-2020-8286",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The libcurl library versions 7.41.0 to and including  7.73.0 are vulnerable to an improper check for certificate revocation due to insufficient verification of the OCSP response. This vulnerability could allow an attacker to pass a revoked certificate as valid.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-8286"
    },
    {
      "cve": "CVE-2020-8315",
      "cwe": {
        "id": "CWE-427",
        "name": "Uncontrolled Search Path Element"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python (CPython) 3.6 through 3.6.10, 3.7 through 3.7.6, and 3.8 through 3.8.1, an insecure dependency load upon launch on Windows 7 may result in an attacker\u0027s copy of api-ms-win-core-path-l1-1-0.dll being loaded and used instead of the system\u0027s copy. Windows 8 and later are unaffected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-8315"
    },
    {
      "cve": "CVE-2020-8492",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Python 2.7 through 2.7.17, 3.5 through 3.5.9, 3.6 through 3.6.10, 3.7 through 3.7.6, and 3.8 through 3.8.1 allows an HTTP server to conduct Regular Expression Denial of Service (ReDoS) attacks against a client because of urllib.request.AbstractBasicAuthHandler catastrophic backtracking.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-8492"
    },
    {
      "cve": "CVE-2020-9327",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.31.1, isAuxiliaryVtabOperator allows attackers to trigger a NULL pointer dereference and segmentation fault because of generated column optimizations.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-9327"
    },
    {
      "cve": "CVE-2020-10029",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The GNU C Library (aka glibc or libc6) before 2.32 could overflow an on-stack buffer during range reduction if an input to an 80-bit long double function contains a non-canonical bit pattern, a seen when passing a 0x5d414141414141410000 value to sinl on x86 targets. This is related to sysdeps/ieee754/ldbl-96/e_rem_pio2l.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-10029"
    },
    {
      "cve": "CVE-2020-10531",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in International Components for Unicode (ICU) for C/C++ through 66.1. An integer overflow, leading to a heap-based buffer overflow, exists in the UnicodeString::doAppend() function in common/unistr.cpp.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-10531"
    },
    {
      "cve": "CVE-2020-10543",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Perl before 5.30.3 on 32-bit platforms allows a heap-based buffer overflow because nested regular expression quantifiers have an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-10543"
    },
    {
      "cve": "CVE-2020-10735",
      "cwe": {
        "id": "CWE-704",
        "name": "Incorrect Type Conversion or Cast"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in python. In algorithms with quadratic time complexity using non-binary bases, when using int(\"text\"), a system could take 50ms to parse an int string with 100,000 digits and 5s for 1,000,000 digits (float, decimal, int.from_bytes(), and int() for binary bases 2, 4, 8, 16, and 32 are not affected). The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-10735"
    },
    {
      "cve": "CVE-2020-10878",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Perl before 5.30.3 has an integer overflow related to mishandling of a \"PL_regkind[OP(n)] == NOTHING\" situation. A crafted regular expression could lead to malformed bytecode with a possibility of instruction injection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-10878"
    },
    {
      "cve": "CVE-2020-11501",
      "cwe": {
        "id": "CWE-330",
        "name": "Use of Insufficiently Random Values"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GnuTLS 3.6.x before 3.6.13 uses incorrect cryptography for DTLS. The earliest affected version is 3.6.3 (2018-07-16) because of an error in a 2017-10-06 commit. The DTLS client always uses 32 \u0027\\0\u0027 bytes instead of a random value, and thus contributes no randomness to a DTLS negotiation. This breaks the security guarantees of the DTLS protocol.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-11501"
    },
    {
      "cve": "CVE-2020-11655",
      "cwe": {
        "id": "CWE-665",
        "name": "Improper Initialization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite through 3.31.1 allows attackers to cause a denial of service (segmentation fault) via a malformed window-function query because the AggInfo object\u0027s initialization is mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-11655"
    },
    {
      "cve": "CVE-2020-11656",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite through 3.31.1, the ALTER TABLE implementation has a use-after-free, as demonstrated by an ORDER BY clause that belongs to a compound SELECT statement.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-11656"
    },
    {
      "cve": "CVE-2020-12062",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The scp client in OpenSSH 8.2 incorrectly sends duplicate responses to the server upon a utimes system call failure, which allows a malicious unprivileged user on the remote server to overwrite arbitrary files in the client\u0027s download directory by creating a crafted subdirectory anywhere on the remote server. The victim must use the command scp -rp to download a file hierarchy containing, anywhere inside, this crafted subdirectory. NOTE: the vendor points out that \"this attack can achieve no more than a hostile peer is already able to achieve within the scp protocol\" and \"utimes does not fail under normal circumstances.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-12062"
    },
    {
      "cve": "CVE-2020-12243",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In filter.c in slapd in OpenLDAP before 2.4.50, LDAP search filters with nested boolean expressions can result in denial of service (daemon crash).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-12243"
    },
    {
      "cve": "CVE-2020-12723",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "regcomp.c in Perl before 5.30.3 allows a buffer overflow via a crafted regular expression because of recursive S_study_chunk calls.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-12723"
    },
    {
      "cve": "CVE-2020-12762",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "json-c through 0.14 has an integer overflow and out-of-bounds write via a large JSON file, as demonstrated by printbuf_memappend.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-12762"
    },
    {
      "cve": "CVE-2020-13434",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite through 3.32.0 has an integer overflow in sqlite3_str_vappendf in printf.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13434"
    },
    {
      "cve": "CVE-2020-13435",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite through 3.32.0 has a segmentation fault in sqlite3ExprCodeTarget in expr.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13435"
    },
    {
      "cve": "CVE-2020-13529",
      "cwe": {
        "id": "CWE-290",
        "name": "Authentication Bypass by Spoofing"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An exploitable denial-of-service vulnerability exists in Systemd 245. A specially crafted DHCP FORCERENEW packet can cause a server running the DHCP client to be vulnerable to a DHCP ACK spoofing attack. An attacker can forge a pair of FORCERENEW and DCHP ACK packets to reconfigure the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:H/PR:N/UI:N/S:C/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13529"
    },
    {
      "cve": "CVE-2020-13630",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ext/fts3/fts3.c in SQLite before 3.32.0 has a use-after-free in fts3EvalNextRow, related to the snippet feature.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13630"
    },
    {
      "cve": "CVE-2020-13631",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite before 3.32.0 allows a virtual table to be renamed to the name of one of its shadow tables, related to alter.c and build.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13631"
    },
    {
      "cve": "CVE-2020-13632",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ext/fts3/fts3_snippet.c in SQLite before 3.32.0 has a NULL pointer dereference via a crafted matchinfo() query.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13632"
    },
    {
      "cve": "CVE-2020-13776",
      "cwe": {
        "id": "CWE-269",
        "name": "Improper Privilege Management"
      },
      "notes": [
        {
          "category": "summary",
          "text": "systemd through v245 mishandles numerical usernames such as ones composed of decimal digits or 0x followed by hex digits, as demonstrated by use of root privileges when privileges of the 0x0 user account were intended. NOTE: this issue exists because of an incomplete fix for CVE-2017-1000082.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13776"
    },
    {
      "cve": "CVE-2020-13777",
      "cwe": {
        "id": "CWE-327",
        "name": "Use of a Broken or Risky Cryptographic Algorithm"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GnuTLS 3.6.x before 3.6.14 uses incorrect cryptography for encrypting a session ticket (a loss of confidentiality in TLS 1.2, and an authentication bypass in TLS 1.3). The earliest affected version is 3.6.4 (2018-09-24) because of an error in a 2018-09-18 commit. Until the first key rotation, the TLS server always uses wrong data in place of an encryption key derived from an application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13777"
    },
    {
      "cve": "CVE-2020-13871",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 3.32.2 has a use-after-free in resetAccumulator in select.c because the parse tree rewrite for window functions is too late.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13871"
    },
    {
      "cve": "CVE-2020-14145",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The client side in OpenSSH 5.7 through 8.4 has an Observable Discrepancy leading to an information leak in the algorithm negotiation. This allows man-in-the-middle attackers to target initial connection attempts (where no host key for the server has been cached by the client). NOTE: some reports state that 8.5 and 8.6 are also affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-14145"
    },
    {
      "cve": "CVE-2020-14422",
      "cwe": {
        "id": "CWE-682",
        "name": "Incorrect Calculation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Lib/ipaddress.py in Python through 3.8.3 improperly computes hash values in the IPv4Interface and IPv6Interface classes, which might allow a remote attacker to cause a denial of service if an application is affected by the performance of a dictionary containing IPv4Interface or IPv6Interface objects, and this attacker can cause many dictionary entries to be created. This is fixed in: v3.5.10, v3.5.10rc1; v3.6.12; v3.7.9; v3.8.4, v3.8.4rc1, v3.8.5, v3.8.6, v3.8.6rc1; v3.9.0, v3.9.0b4, v3.9.0b5, v3.9.0rc1, v3.9.0rc2.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-14422"
    },
    {
      "cve": "CVE-2020-15358",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite before 3.32.3, select.c mishandles query-flattener optimization, leading to a multiSelectOrderBy heap overflow because of misuse of transitive properties for constant propagation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-15358"
    },
    {
      "cve": "CVE-2020-15523",
      "cwe": {
        "id": "CWE-427",
        "name": "Uncontrolled Search Path Element"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python 3.6 through 3.6.10, 3.7 through 3.7.8, 3.8 through 3.8.4rc1, and 3.9 through 3.9.0b4 on Windows, a Trojan horse python3.dll might be used in cases where CPython is embedded in a native application. This occurs because python3X.dll may use an invalid search path for python3.dll loading (after Py_SetPath has been used). NOTE: this issue CANNOT occur when using python.exe from a standard (non-embedded) Python installation on Windows.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-15523"
    },
    {
      "cve": "CVE-2020-15778",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "scp in OpenSSH through 8.3p1 allows command injection in the scp.c toremote function, as demonstrated by backtick characters in the destination argument. NOTE: the vendor reportedly has stated that they intentionally omit validation of \"anomalous argument transfers\" because that could \"stand a great chance of breaking existing workflows.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-15778"
    },
    {
      "cve": "CVE-2020-15801",
      "cwe": {
        "id": "CWE-426",
        "name": "Untrusted Search Path"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python 3.8.4, sys.path restrictions specified in a python38._pth file are ignored, allowing code to be loaded from arbitrary locations. The \u003cexecutable-name\u003e._pth file (e.g., the python._pth file) is not affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-15801"
    },
    {
      "cve": "CVE-2020-19185",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in one_one_mapping function in progs/dump_entry.c:1373 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-19185"
    },
    {
      "cve": "CVE-2020-19186",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in _nc_find_entry function in tinfo/comp_hash.c:66 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-19186"
    },
    {
      "cve": "CVE-2020-19187",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in fmt_entry function in progs/dump_entry.c:1100 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-19187"
    },
    {
      "cve": "CVE-2020-19188",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in fmt_entry function in progs/dump_entry.c:1116 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-19188"
    },
    {
      "cve": "CVE-2020-19189",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in postprocess_terminfo function in tinfo/parse_entry.c:997 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-19189"
    },
    {
      "cve": "CVE-2020-19190",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in _nc_find_entry in tinfo/comp_hash.c:70 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-19190"
    },
    {
      "cve": "CVE-2020-19909",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Integer overflow vulnerability in tool_operate.c in curl 7.65.2 via a large value as the retry delay. NOTE: many parties report that this has no direct security impact on the curl user; however, it may (in theory) cause a denial of service to associated systems or networks if, for example, --retry-delay is misinterpreted as a value much smaller than what was intended. This is not especially plausible because the overflow only happens if the user was trying to specify that curl should wait weeks (or longer) before trying to recover from a transient error.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-19909"
    },
    {
      "cve": "CVE-2020-21047",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The libcpu component which is used by libasm of elfutils version 0.177 (git 47780c9e), suffers from denial-of-service vulnerability caused by application crashes due to out-of-bounds write (CWE-787), off-by-one error (CWE-193) and reachable assertion (CWE-617); to exploit the vulnerability, the attackers need to craft certain ELF files which bypass the missing bound checks.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-21047"
    },
    {
      "cve": "CVE-2020-21913",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "International Components for Unicode (ICU-20850) v66.1 was discovered to contain a use after free bug in the pkg_createWithAssemblyCode function in the file tools/pkgdata/pkgdata.cpp.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-21913"
    },
    {
      "cve": "CVE-2020-22218",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in function _libssh2_packet_add in libssh2 1.10.0 allows attackers to access out of bounds memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-22218"
    },
    {
      "cve": "CVE-2020-24659",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in GnuTLS before 3.6.15. A server can trigger a NULL pointer dereference in a TLS 1.3 client if a no_renegotiation alert is sent with unexpected timing, and then an invalid second handshake occurs. The crash happens in the application\u0027s error handling path, where the gnutls_deinit function is called after detecting a handshake failure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-24659"
    },
    {
      "cve": "CVE-2020-24977",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNOME project libxml2 v2.9.10 has a global buffer over-read vulnerability in xmlEncodeEntitiesInternal at libxml2/entities.c. The issue has been fixed in commit 50f06b3e.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-24977"
    },
    {
      "cve": "CVE-2020-25692",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference was found in OpenLDAP server and was fixed in openldap 2.4.55, during a request for renaming RDNs. An unauthenticated attacker could remotely crash the slapd process by sending a specially crafted request, causing a Denial of Service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-25692"
    },
    {
      "cve": "CVE-2020-25709",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in OpenLDAP. This flaw allows an attacker who can send a malicious packet to be processed by OpenLDAP\u2019s slapd server, to trigger an assertion failure. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-25709"
    },
    {
      "cve": "CVE-2020-25710",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in OpenLDAP in versions before 2.4.56. This flaw allows an attacker who sends a malicious packet processed by OpenLDAP to force a failed assertion in csnNormalize23(). The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-25710"
    },
    {
      "cve": "CVE-2020-26116",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "http.client in Python 3.x before 3.5.10, 3.6.x before 3.6.12, 3.7.x before 3.7.9, and 3.8.x before 3.8.5 allows CRLF injection if the attacker controls the HTTP request method, as demonstrated by inserting CR and LF control characters in the first argument of HTTPConnection.request.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-26116"
    },
    {
      "cve": "CVE-2020-27618",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv function in the GNU C Library (aka glibc or libc6) 2.32 and earlier, when processing invalid multi-byte input sequences in IBM1364, IBM1371, IBM1388, IBM1390, and IBM1399 encodings, fails to advance the input state, which could lead to an infinite loop in applications, resulting in a denial of service, a different vulnerability from CVE-2016-10228.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-27618"
    },
    {
      "cve": "CVE-2020-28196",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "MIT Kerberos 5 (aka krb5) before 1.17.2 and 1.18.x before 1.18.3 allows unbounded recursion via an ASN.1-encoded Kerberos message because the lib/krb5/asn.1/asn1_encode.c support for BER indefinite lengths lacks a recursion limit.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-28196"
    },
    {
      "cve": "CVE-2020-29361",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in p11-kit 0.21.1 through 0.23.21. Multiple integer overflows have been discovered in the array allocations in the p11-kit library and the p11-kit list command, where overflow checks are missing before calling realloc or calloc.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-29361"
    },
    {
      "cve": "CVE-2020-29362",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in p11-kit 0.21.1 through 0.23.21. A heap-based buffer over-read has been discovered in the RPC protocol used by thep11-kit server/remote commands and the client library. When the remote entity supplies a byte array through a serialized PKCS#11 function call, the receiving entity may allow the reading of up to 4 bytes of memory past the heap allocation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-29362"
    },
    {
      "cve": "CVE-2020-29363",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in p11-kit 0.23.6 through 0.23.21. A heap-based buffer overflow has been discovered in the RPC protocol used by p11-kit server/remote commands and the client library. When the remote entity supplies a serialized byte array in a CK_ATTRIBUTE, the receiving entity may not allocate sufficient length for the buffer to store the deserialized value.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-29363"
    },
    {
      "cve": "CVE-2020-29562",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv function in the GNU C Library (aka glibc or libc6) 2.30 to 2.32, when converting UCS4 text containing an irreversible character, fails an assertion in the code path and aborts the program, potentially resulting in a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-29562"
    },
    {
      "cve": "CVE-2020-29573",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "sysdeps/i386/ldbl2mpn.c in the GNU C Library (aka glibc or libc6) before 2.23 on x86 targets has a stack-based buffer overflow if the input to any of the printf family of functions is an 80-bit long double with a non-canonical bit pattern, as seen when passing a \\x00\\x04\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x04 value to sprintf. NOTE: the issue does not affect glibc by default in 2016 or later (i.e., 2.23 or later) because of commits made in 2015 for inlining of C99 math functions through use of GCC built-ins. In other words, the reference to 2.23 is intentional despite the mention of \"Fixed for glibc 2.33\" in the 26649 reference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-29573"
    },
    {
      "cve": "CVE-2020-35525",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQlite 3.31.1, a potential null pointer derreference was found in the INTERSEC query processing.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-35525"
    },
    {
      "cve": "CVE-2020-35527",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.31.1, there is an out of bounds access problem through ALTER TABLE for views that have a nested FROM clause.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-35527"
    },
    {
      "cve": "CVE-2020-36221",
      "cwe": {
        "id": "CWE-191",
        "name": "Integer Underflow (Wrap or Wraparound)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer underflow was discovered in OpenLDAP before 2.4.57 leading to slapd crashes in the Certificate Exact Assertion processing, resulting in denial of service (schema_init.c serialNumberAndIssuerCheck).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36221"
    },
    {
      "cve": "CVE-2020-36222",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to an assertion failure in slapd in the saslAuthzTo validation, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36222"
    },
    {
      "cve": "CVE-2020-36223",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to a slapd crash in the Values Return Filter control handling, resulting in denial of service (double free and out-of-bounds read).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36223"
    },
    {
      "cve": "CVE-2020-36224",
      "cwe": {
        "id": "CWE-763",
        "name": "Release of Invalid Pointer or Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to an invalid pointer free and slapd crash in the saslAuthzTo processing, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36224"
    },
    {
      "cve": "CVE-2020-36225",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to a double free and slapd crash in the saslAuthzTo processing, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36225"
    },
    {
      "cve": "CVE-2020-36226",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to a memch-\u003ebv_len miscalculation and slapd crash in the saslAuthzTo processing, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36226"
    },
    {
      "cve": "CVE-2020-36227",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to an infinite loop in slapd with the cancel_extop Cancel operation, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36227"
    },
    {
      "cve": "CVE-2020-36228",
      "cwe": {
        "id": "CWE-191",
        "name": "Integer Underflow (Wrap or Wraparound)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer underflow was discovered in OpenLDAP before 2.4.57 leading to a slapd crash in the Certificate List Exact Assertion processing, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36228"
    },
    {
      "cve": "CVE-2020-36229",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in ldap_X509dn2bv in OpenLDAP before 2.4.57 leading to a slapd crash in the X.509 DN parsing in ad_keystring, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36229"
    },
    {
      "cve": "CVE-2020-36230",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading in an assertion failure in slapd in the X.509 DN parsing in decode.c ber_next_element, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36230"
    },
    {
      "cve": "CVE-2021-3177",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Python 3.x through 3.9.1 has a buffer overflow in PyCArg_repr in _ctypes/callproc.c, which may lead to remote code execution in certain Python applications that accept floating-point numbers as untrusted input, as demonstrated by a 1e300 argument to c_double.from_param. This occurs because sprintf is used unsafely.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3177"
    },
    {
      "cve": "CVE-2021-3326",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv function in the GNU C Library (aka glibc or libc6) 2.32 and earlier, when processing invalid input sequences in the ISO-2022-JP-3 encoding, fails an assertion in the code path and aborts the program, potentially resulting in a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3326"
    },
    {
      "cve": "CVE-2021-3426",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in Python 3\u0027s pydoc. A local or adjacent attacker who discovers or is able to convince another local or adjacent user to start a pydoc server could access the server and use it to disclose sensitive information belonging to the other user that they would not normally be able to access. The highest risk of this flaw is to data confidentiality. This flaw affects Python versions before 3.8.9, Python versions before 3.9.3 and Python versions before 3.10.0a7.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3426"
    },
    {
      "cve": "CVE-2021-3516",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in libxml2\u0027s xmllint in versions before 2.9.11. An attacker who is able to submit a crafted file to be processed by xmllint could trigger a use-after-free. The greatest impact of this flaw is to confidentiality, integrity, and availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3516"
    },
    {
      "cve": "CVE-2021-3517",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a flaw in the xml entity encoding functionality of libxml2 in versions before 2.9.11. An attacker who is able to supply a crafted file to be processed by an application linked with the affected functionality of libxml2 could trigger an out-of-bounds read. The most likely impact of this flaw is to application availability, with some potential impact to confidentiality and integrity if an attacker is able to use memory information to further exploit the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3517"
    },
    {
      "cve": "CVE-2021-3518",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in libxml2 in versions before 2.9.11. An attacker who is able to submit a crafted file to be processed by an application linked with libxml2 could trigger a use-after-free. The greatest impact from this flaw is to confidentiality, integrity, and availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3518"
    },
    {
      "cve": "CVE-2021-3520",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in lz4. An attacker who submits a crafted file to an application linked with lz4 may be able to trigger an integer overflow, leading to calling of memmove() on a negative size argument, causing an out-of-bounds write and/or a crash. The greatest impact of this flaw is to availability, with some potential impact to confidentiality and integrity as well.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3520"
    },
    {
      "cve": "CVE-2021-3537",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability found in libxml2 in versions before 2.9.11 shows that it did not propagate errors while parsing XML mixed content, causing a NULL dereference. If an untrusted XML document was parsed in recovery mode and post-validated, the flaw could be used to crash the application. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3537"
    },
    {
      "cve": "CVE-2021-3541",
      "cwe": {
        "id": "CWE-776",
        "name": "Improper Restriction of Recursive Entity References in DTDs (\u0027XML Entity Expansion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in libxml2. Exponential entity expansion attack its possible bypassing all existing protection mechanisms and leading to denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3541"
    },
    {
      "cve": "CVE-2021-3580",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the way nettle\u0027s RSA decryption functions handled specially crafted ciphertext. An attacker could use this flaw to provide a manipulated ciphertext leading to application crash and denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3580"
    },
    {
      "cve": "CVE-2021-3733",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in urllib\u0027s AbstractBasicAuthHandler class. An attacker who controls a malicious HTTP server that an HTTP client (such as web browser) connects to, could trigger a Regular Expression Denial of Service (ReDOS) during an authentication request with a specially crafted payload that is sent by the server to the client. The greatest threat that this flaw poses is to application availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3733"
    },
    {
      "cve": "CVE-2021-3737",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in python. An improperly handled HTTP response in the HTTP client code of python may allow a remote attacker, who controls the HTTP server, to make the client script enter an infinite loop, consuming CPU time. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3737"
    },
    {
      "cve": "CVE-2021-3826",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Heap/stack buffer overflow in the dlang_lname function in d-demangle.c in libiberty allows attackers to potentially cause a denial of service (segmentation fault and crash) via a crafted mangled symbol.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3826"
    },
    {
      "cve": "CVE-2021-3997",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in systemd. An uncontrolled recursion in systemd-tmpfiles may lead to a denial of service at boot time when too many nested directories are created in /tmp.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3997"
    },
    {
      "cve": "CVE-2021-3998",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. The realpath() function can mistakenly return an unexpected value, potentially leading to information leakage and disclosure of sensitive data.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3998"
    },
    {
      "cve": "CVE-2021-3999",
      "cwe": {
        "id": "CWE-193",
        "name": "Off-by-one Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. An off-by-one buffer overflow and underflow in getcwd() may lead to memory corruption when the size of the buffer is exactly 1. A local attacker who can control the input buffer and size passed to getcwd() in a setuid program could use this flaw to potentially execute arbitrary code and escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3999"
    },
    {
      "cve": "CVE-2021-4122",
      "cwe": {
        "id": "CWE-345",
        "name": "Insufficient Verification of Data Authenticity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "It was found that a specially crafted LUKS header could trick cryptsetup into disabling encryption during the recovery of the device. An attacker with physical access to the medium, such as a flash disk, could use this flaw to force a user into permanently disabling the encryption layer of that medium.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:P/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-4122"
    },
    {
      "cve": "CVE-2021-4189",
      "cwe": {
        "id": "CWE-252",
        "name": "Unchecked Return Value"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in Python, specifically in the FTP (File Transfer Protocol) client library in PASV (passive) mode. The issue is how the FTP client trusts the host from the PASV response by default. This flaw allows an attacker to set up a malicious FTP server that can trick FTP clients into connecting back to a given IP address and port. This vulnerability could lead to FTP client scanning ports, which otherwise would not have been possible.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-4189"
    },
    {
      "cve": "CVE-2021-4209",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference flaw was found in GnuTLS. As Nettle\u0027s hash update functions internally call memcpy, providing zero-length input may cause undefined behavior. This flaw leads to a denial of service after authentication in rare circumstances.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-4209"
    },
    {
      "cve": "CVE-2021-20193",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the src/list.c of tar 1.33 and earlier. This flaw allows an attacker who can submit a crafted input file to tar to cause uncontrolled consumption of memory. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-20193"
    },
    {
      "cve": "CVE-2021-20227",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in SQLite\u0027s SELECT query functionality (src/select.c). This flaw allows an attacker who is capable of running SQL queries locally on the SQLite database to cause a denial of service or possible code execution by triggering a use-after-free. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-20227"
    },
    {
      "cve": "CVE-2021-20231",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in gnutls. A use after free issue in client sending key_share extension may lead to memory corruption and other consequences.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-20231"
    },
    {
      "cve": "CVE-2021-20232",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in gnutls. A use after free issue in client_send_params in lib/ext/pre_shared_key.c may lead to memory corruption and other potential consequences.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-20232"
    },
    {
      "cve": "CVE-2021-20305",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in Nettle in versions before 3.7.2, where several Nettle signature verification functions (GOST DSA, EDDSA \u0026 ECDSA) result in the Elliptic Curve Cryptography point (ECC) multiply function being called with out-of-range scalers, possibly resulting in incorrect results. This flaw allows an attacker to force an invalid signature, causing an assertion failure or possible validation. The highest threat to this vulnerability is to confidentiality, integrity, as well as system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-20305"
    },
    {
      "cve": "CVE-2021-22876",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.1.1 to and including 7.75.0 is vulnerable to an \"Exposure of Private Personal Information to an Unauthorized Actor\" by leaking credentials in the HTTP Referer: header. libcurl does not strip off user credentials from the URL when automatically populating the Referer: HTTP request header field in outgoing HTTP requests, and therefore risks leaking sensitive data to the server that is the target of the second HTTP request.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22876"
    },
    {
      "cve": "CVE-2021-22890",
      "cwe": {
        "id": "CWE-290",
        "name": "Authentication Bypass by Spoofing"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.63.0 to and including 7.75.0 includes vulnerability that allows a malicious HTTPS proxy to MITM a connection due to bad handling of TLS 1.3 session tickets. When using a HTTPS proxy and TLS 1.3, libcurl can confuse session tickets arriving from the HTTPS proxy but work as if they arrived from the remote server and then wrongly \"short-cut\" the host handshake. When confusing the tickets, a HTTPS proxy can trick libcurl to use the wrong session ticket resume for the host and thereby circumvent the server TLS certificate check and make a MITM attack to be possible to perform unnoticed. Note that such a malicious HTTPS proxy needs to provide a certificate that curl will accept for the MITMed server for an attack to work - unless curl has been told to ignore the server certificate check.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22890"
    },
    {
      "cve": "CVE-2021-22897",
      "cwe": {
        "id": "CWE-668",
        "name": "Exposure of Resource to Wrong Sphere"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.61.0 through 7.76.1 suffers from exposure of data element to wrong session due to a mistake in the code for CURLOPT_SSL_CIPHER_LIST when libcurl is built to use the Schannel TLS library. The selected cipher set was stored in a single \"static\" variable in the library, which has the surprising side-effect that if an application sets up multiple concurrent transfers, the last one that sets the ciphers will accidentally control the set used by all transfers. In a worst-case scenario, this weakens transport security significantly.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22897"
    },
    {
      "cve": "CVE-2021-22898",
      "cwe": {
        "id": "CWE-909",
        "name": "Missing Initialization of Resource"
      },
      "notes": [
        {
          "category": "summary",
          "text": "**NOTE: CVE-2021-22898 is an incomplete fix (see https://hackerone.com/reports/1223882)! Check if affected products also have fixed CVE-22925 instead! Do not use CVE-2021-22898 in public advisories!**\r\n\r\ncurl 7.7 through 7.76.1 suffers from an information disclosure when the `-t` command line option, known as `CURLOPT_TELNETOPTIONS` in libcurl, is used to send variable=content pairs to TELNET servers. Due to a flaw in the option parser for sending NEW_ENV variables, libcurl could be made to pass on uninitialized data from a stack based buffer to the server, resulting in potentially revealing sensitive internal information to the server using a clear-text network protocol.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.1,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22898"
    },
    {
      "cve": "CVE-2021-22901",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.75.0 through 7.76.1 suffers from a use-after-free vulnerability resulting in already freed memory being used when a TLS 1.3 session ticket arrives over a connection. A malicious server can use this in rare unfortunate circumstances to potentially reach remote code execution in the client. When libcurl at run-time sets up support for TLS 1.3 session tickets on a connection using OpenSSL, it stores pointers to the transfer in-memory object for later retrieval when a session ticket arrives. If the connection is used by multiple transfers (like with a reused HTTP/1.1 connection or multiplexed HTTP/2 connection) that first transfer object might be freed before the new session is established on that connection and then the function will access a memory buffer that might be freed. When using that memory, libcurl might even call a function pointer in the object, making it possible for a remote code execution if the server could somehow manage to get crafted memory content into the correct place in memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22901"
    },
    {
      "cve": "CVE-2021-22922",
      "cwe": {
        "id": "CWE-354",
        "name": "Improper Validation of Integrity Check Value"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl is instructed to download content using the metalink feature, thecontents is verified against a hash provided in the metalink XML file.The metalink XML file points out to the client how to get the same contentfrom a set of different URLs, potentially hosted by different servers and theclient can then download the file from one or several of them. In a serial orparallel manner.If one of the servers hosting the contents has been breached and the contentsof the specific file on that server is replaced with a modified payload, curlshould detect this when the hash of the file mismatches after a completeddownload. It should remove the contents and instead try getting the contentsfrom another URL. This is not done, and instead such a hash mismatch is onlymentioned in text and the potentially malicious content is kept in the file ondisk.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22922"
    },
    {
      "cve": "CVE-2021-22923",
      "cwe": {
        "id": "CWE-522",
        "name": "Insufficiently Protected Credentials"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl is instructed to get content using the metalink feature, and a user name and password are used to download the metalink XML file, those same credentials are then subsequently passed on to each of the servers from which curl will download or try to download the contents from. Often contrary to the user\u0027s expectations and intentions and without telling the user it happened.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22923"
    },
    {
      "cve": "CVE-2021-22924",
      "cwe": {
        "id": "CWE-706",
        "name": "Use of Incorrectly-Resolved Name or Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl keeps previously used connections in a connection pool for subsequent transfers to reuse, if one of them matches the setup. Due to errors in the logic, the config matching function did not take \u0027issuercert\u0027 into account and it compared the involved paths *case insensitively*, which could lead to libcurl reusing wrong connections. File paths are, or can be, case sensitive on many systems but not all, and can even vary depending on used file systems. The comparison also didn\u0027t include the \u0027issuer cert\u0027 which a transfer can set to qualify how to verify the server certificate.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22924"
    },
    {
      "cve": "CVE-2021-22925",
      "cwe": {
        "id": "CWE-908",
        "name": "Use of Uninitialized Resource"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl supports the `-t` command line option, known as `CURLOPT_TELNETOPTIONS` in libcurl. This rarely used option is used to send variable=content pairs to TELNET servers. Due to flaw in the option parser for sending `NEW_ENV` variables, libcurl could be made to pass on uninitialized data from a stack based buffer to the server. Therefore potentially revealing sensitive internal information to the server using a clear-text network protocol. This could happen because curl did not call and use sscanf() correctly when parsing the string provided by the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22925"
    },
    {
      "cve": "CVE-2021-22926",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl-using applications can ask for a specific client certificate to be used in a transfer. This is done with the `CURLOPT_SSLCERT` option (`--cert` with the command line tool).When libcurl is built to use the macOS native TLS library Secure Transport, an application can ask for the client certificate by name or with a file name - using the same option. If the name exists as a file, it will be used instead of by name.If the appliction runs with a current working directory that is writable by other users (like `/tmp`), a malicious user can create a file name with the same name as the app wants to use by name, and thereby trick the application to use the file based cert instead of the one referred to by name making libcurl send the wrong client certificate in the TLS connection handshake.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22926"
    },
    {
      "cve": "CVE-2021-22945",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When sending data to an MQTT server, libcurl \u003c= 7.73.0 and 7.78.0 could in some circumstances erroneously keep a pointer to an already freed memory area and both use that again in a subsequent call to send data and also free it *again*.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22945"
    },
    {
      "cve": "CVE-2021-22946",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A user can tell curl \u003e= 7.20.0 and \u003c= 7.78.0 to require a successful upgrade to TLS when speaking to an IMAP, POP3 or FTP server (`--ssl-reqd` on the command line or`CURLOPT_USE_SSL` set to `CURLUSESSL_CONTROL` or `CURLUSESSL_ALL` withlibcurl). This requirement could be bypassed if the server would return a properly crafted but perfectly legitimate response.This flaw would then make curl silently continue its operations **withoutTLS** contrary to the instructions and expectations, exposing possibly sensitive data in clear text over the network.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22946"
    },
    {
      "cve": "CVE-2021-22947",
      "cwe": {
        "id": "CWE-345",
        "name": "Insufficient Verification of Data Authenticity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl \u003e= 7.20.0 and \u003c= 7.78.0 connects to an IMAP or POP3 server to retrieve data using STARTTLS to upgrade to TLS security, the server can respond and send back multiple responses at once that curl caches. curl would then upgrade to TLS but not flush the in-queue of cached responses but instead continue using and trustingthe responses it got *before* the TLS handshake as if they were authenticated.Using this flaw, it allows a Man-In-The-Middle attacker to first inject the fake responses, then pass-through the TLS traffic from the legitimate server and trick curl into sending data back to the user thinking the attacker\u0027s injected data comes from the TLS-protected server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22947"
    },
    {
      "cve": "CVE-2021-23336",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The package python/cpython from 0 and before 3.6.13, from 3.7.0 and before 3.7.10, from 3.8.0 and before 3.8.8, from 3.9.0 and before 3.9.2 are vulnerable to Web Cache Poisoning via urllib.parse.parse_qsl and urllib.parse.parse_qs by using a vector called parameter cloaking. When the attacker can separate query parameters using a semicolon (;), they can cause a difference in the interpretation of the request between the proxy (running with default configuration) and the server. This can result in malicious requests being cached as completely safe ones, as the proxy would usually not see the semicolon as a separator, and therefore would not include it in a cache key of an unkeyed parameter.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:N/I:L/A:H/E:P/RL:U/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-23336"
    },
    {
      "cve": "CVE-2021-27212",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In OpenLDAP through 2.4.57 and 2.5.x through 2.5.1alpha, an assertion failure in slapd can occur in the issuerAndThisUpdateCheck function via a crafted packet, resulting in a denial of service (daemon exit) via a short timestamp. This is related to schema_init.c and checkTime.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-27212"
    },
    {
      "cve": "CVE-2021-27218",
      "cwe": {
        "id": "CWE-681",
        "name": "Incorrect Conversion between Numeric Types"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in GNOME GLib before 2.66.7 and 2.67.x before 2.67.4. If g_byte_array_new_take() was called with a buffer of 4GB or more on a 64-bit platform, the length would be truncated modulo 2**32, causing unintended length truncation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-27218"
    },
    {
      "cve": "CVE-2021-27219",
      "cwe": {
        "id": "CWE-681",
        "name": "Incorrect Conversion between Numeric Types"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in GNOME GLib before 2.66.6 and 2.67.x before 2.67.3. The function g_bytes_new has an integer overflow on 64-bit platforms due to an implicit cast from 64 bits to 32 bits. The overflow could potentially lead to memory corruption.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-27219"
    },
    {
      "cve": "CVE-2021-27645",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The nameserver caching daemon (nscd) in the GNU C Library (aka glibc or libc6) 2.29 through 2.33, when processing a request for netgroup lookup, may crash due to a double-free, potentially resulting in degraded service or Denial of Service on the local system. This is related to netgroupcache.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 2.5,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-27645"
    },
    {
      "cve": "CVE-2021-28041",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ssh-agent in OpenSSH before 8.5 has a double free that may be relevant in a few less-common scenarios, such as unconstrained agent-socket access on a legacy operating system, or the forwarding of an agent to an attacker-controlled host.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-28041"
    },
    {
      "cve": "CVE-2021-28153",
      "cwe": {
        "id": "CWE-59",
        "name": "Improper Link Resolution Before File Access (\u0027Link Following\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in GNOME GLib before 2.66.8. When g_file_replace() is used with G_FILE_CREATE_REPLACE_DESTINATION to replace a path that is a dangling symlink, it incorrectly also creates the target of the symlink as an empty file, which could conceivably have security relevance if the symlink is attacker-controlled. (If the path is a symlink to a file that already exists, then the contents of that file correctly remain unchanged.)",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-28153"
    },
    {
      "cve": "CVE-2021-28363",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The urllib3 library 1.26.x before 1.26.4 for Python omits SSL certificate validation in some cases involving HTTPS to HTTPS proxies. The initial connection to the HTTPS proxy (if an SSLContext isn\u0027t given via proxy_config) doesn\u0027t verify the hostname of the certificate. This means certificates for different servers that still validate properly with the default urllib3 SSLContext will be silently accepted.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-28363"
    },
    {
      "cve": "CVE-2021-28861",
      "cwe": {
        "id": "CWE-601",
        "name": "URL Redirection to Untrusted Site (\u0027Open Redirect\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Python 3.x through 3.10 has an open redirection vulnerability in lib/http/server.py due to no protection against multiple (/) at the beginning of URI path which may leads to information disclosure. NOTE: this is disputed by a third party because the http.server.html documentation page states \"Warning: http.server is not recommended for production. It only implements basic security checks.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-28861"
    },
    {
      "cve": "CVE-2021-31239",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue found in SQLite SQLite3 v.3.35.4 that could allow a remote attacker to cause a denial of service via the appendvfs.c function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-31239"
    },
    {
      "cve": "CVE-2021-32292",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in json-c from 20200420 (post 0.14 unreleased code) through 0.15-20200726. A stack-buffer-overflow exists in the auxiliary sample program json_parse which is located in the function parseit.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-32292"
    },
    {
      "cve": "CVE-2021-33294",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In elfutils 0.183, an infinite loop was found in the function handle_symtab in readelf.c .Which allows attackers to cause a denial of service (infinite loop) via crafted file.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-33294"
    },
    {
      "cve": "CVE-2021-33560",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Libgcrypt before 1.8.8 and 1.9.x before 1.9.3 mishandles ElGamal encryption because it lacks exponent blinding to address a side-channel attack against mpi_powm, and the window size is not chosen appropriately. This, for example, affects use of ElGamal in OpenPGP.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-33560"
    },
    {
      "cve": "CVE-2021-33574",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The mq_notify function in the GNU C Library (aka glibc) versions 2.32 and 2.33 has a use-after-free. It may use the notification thread attributes object (passed through its struct sigevent parameter) after it has been freed by the caller, leading to a denial of service (application crash) or possibly unspecified other impact.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-33574"
    },
    {
      "cve": "CVE-2021-33910",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The use of alloca function with an uncontrolled size in function unit_name_path_escape allows a local attacker, able to mount a filesystem on a very long path, to crash systemd and the whole system by allocating a very large space in the stack.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-33910"
    },
    {
      "cve": "CVE-2021-35942",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The wordexp function in the GNU C Library (aka glibc) through 2.33 may crash or read arbitrary memory in parse_param (in posix/wordexp.c) when called with an untrusted, crafted pattern, potentially resulting in a denial of service or disclosure of information. This occurs because atoi was used but strtoul should have been used to ensure correct calculations.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-35942"
    },
    {
      "cve": "CVE-2021-36084",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The CIL compiler in SELinux 3.2 has a use-after-free in __cil_verify_classperms (called from __cil_verify_classpermission and __cil_pre_verify_helper).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-36084"
    },
    {
      "cve": "CVE-2021-36085",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The CIL compiler in SELinux 3.2 has a use-after-free in __cil_verify_classperms (called from __verify_map_perm_classperms and hashtab_map).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-36085"
    },
    {
      "cve": "CVE-2021-36086",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The CIL compiler in SELinux 3.2 has a use-after-free in cil_reset_classpermission (called from cil_reset_classperms_set and cil_reset_classperms_list).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-36086"
    },
    {
      "cve": "CVE-2021-36087",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The CIL compiler in SELinux 3.2 has a heap-based buffer over-read in ebitmap_match_any (called indirectly from cil_check_neverallow). This occurs because there is sometimes a lack of checks for invalid statements in an optional block.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-36087"
    },
    {
      "cve": "CVE-2021-36222",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ec_verify in kdc/kdc_preauth_ec.c in the Key Distribution Center (KDC) in MIT Kerberos 5 (aka krb5) before 1.18.4 and 1.19.x before 1.19.2 allows remote attackers to cause a NULL pointer dereference and daemon crash. This occurs because a return value is not properly managed in a certain situation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-36222"
    },
    {
      "cve": "CVE-2021-36690",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A segmentation fault can occur in the sqlite3.exe command-line component of SQLite 3.36.0 via the idxGetTableInfo function when there is a crafted SQL query. NOTE: the vendor disputes the relevance of this report because a sqlite3.exe user already has full privileges (e.g., is intentionally allowed to execute commands). This report does NOT imply any problem in the SQLite library.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-36690"
    },
    {
      "cve": "CVE-2021-37600",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow in util-linux through 2.37.1 can potentially cause a buffer overflow if an attacker were able to use system resources in a way that leads to a large number in the /proc/sysvipc/sem file. NOTE: this is unexploitable in GNU C Library environments, and possibly in all realistic environments",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-37600"
    },
    {
      "cve": "CVE-2021-37750",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Key Distribution Center (KDC) in MIT Kerberos 5 (aka krb5) before 1.18.5 and 1.19.x before 1.19.3 has a NULL pointer dereference in kdc/do_tgs_req.c via a FAST inner body that lacks a server field.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-37750"
    },
    {
      "cve": "CVE-2021-38604",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In librt in the GNU C Library (aka glibc) through 2.34, sysdeps/unix/sysv/linux/mq_notify.c mishandles certain NOTIFY_REMOVED data, leading to a NULL pointer dereference. NOTE: this vulnerability was introduced as a side effect of the CVE-2021-33574 fix.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-38604"
    },
    {
      "cve": "CVE-2021-41617",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "sshd in OpenSSH 6.2 through 8.x before 8.8, when certain non-default configurations are used, allows privilege escalation because supplemental groups are not initialized as expected. Helper programs for AuthorizedKeysCommand and AuthorizedPrincipalsCommand may run with privileges associated with group memberships of the sshd process, if the configuration specifies running the command as a different user.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-41617"
    },
    {
      "cve": "CVE-2021-43396",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** In iconvdata/iso-2022-jp-3.c in the GNU C Library (aka glibc) 2.34, remote attackers can force iconv() to emit a spurious \u0027\\0\u0027 character via crafted ISO-2022-JP-3 data that is accompanied by an internal state reset. This may affect data integrity in certain iconv() use cases. NOTE: the vendor states \"the bug cannot be invoked through user input and requires iconv to be invoked with a NULL inbuf, which ought to require a separate application bug to do so unintentionally. Hence there\u0027s no security impact to the bug.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-43396"
    },
    {
      "cve": "CVE-2021-43618",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU Multiple Precision Arithmetic Library (GMP) through 6.2.1 has an mpz/inp_raw.c integer overflow and resultant buffer overflow via crafted input, leading to a segmentation fault on 32-bit platforms.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-43618"
    },
    {
      "cve": "CVE-2021-44879",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In gc_data_segment in fs/f2fs/gc.c in the Linux kernel before 5.16.3, special files are not considered, leading to a move_data_page NULL pointer dereference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-44879"
    },
    {
      "cve": "CVE-2021-45960",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Expat (aka libexpat) before 2.4.3, a left shift by 29 (or more) places in the storeAtts function in xmlparse.c can lead to realloc misbehavior (e.g., allocating too few bytes, or only freeing memory).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-45960"
    },
    {
      "cve": "CVE-2021-46143",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In doProlog in xmlparse.c in Expat (aka libexpat) before 2.4.3, an integer overflow exists for m_groupSize.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-46143"
    },
    {
      "cve": "CVE-2021-46195",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GCC v12.0 was discovered to contain an uncontrolled recursion via the component libiberty/rust-demangle.c. This vulnerability allows attackers to cause a Denial of Service (DoS) by consuming excessive CPU and memory resources.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-46195"
    },
    {
      "cve": "CVE-2021-46828",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libtirpc before 1.3.3rc1, remote attackers could exhaust the file descriptors of a process that uses libtirpc because idle TCP connections are mishandled. This can, in turn, lead to an svc_run infinite loop without accepting new connections.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-46828"
    },
    {
      "cve": "CVE-2021-46848",
      "cwe": {
        "id": "CWE-193",
        "name": "Off-by-one Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU Libtasn1 before 4.19.0 has an ETYPE_OK off-by-one array size check that affects asn1_encode_simple_der.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-46848"
    },
    {
      "cve": "CVE-2022-0391",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in Python, specifically within the urllib.parse module. This module helps break Uniform Resource Locator (URL) strings into components. The issue involves how the urlparse method does not sanitize input and allows characters like \u0027\\r\u0027 and \u0027\\n\u0027 in the URL path. This flaw allows an attacker to input a crafted URL, leading to injection attacks. This flaw affects Python versions prior to 3.10.0b1, 3.9.5, 3.8.11, 3.7.11 and 3.6.14.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-0391"
    },
    {
      "cve": "CVE-2022-0563",
      "cwe": {
        "id": "CWE-209",
        "name": "Generation of Error Message Containing Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the util-linux chfn and chsh utilities when compiled with Readline support. The Readline library uses an \"INPUTRC\" environment variable to get a path to the library config file. When the library cannot parse the specified file, it prints an error message containing data from the file. This flaw allows an unprivileged user to read root-owned files, potentially leading to privilege escalation. This flaw affects util-linux versions prior to 2.37.4.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-0563"
    },
    {
      "cve": "CVE-2022-0778",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The BN_mod_sqrt() function in openSSL, which computes a modular square root, contains a bug that can cause it to loop forever for non-prime moduli. Internally this function is used when parsing certificates that contain elliptic curve public keys in compressed form or explicit elliptic curve parameters with a base point encoded in compressed form. It is possible to trigger the infinite loop by crafting a certificate that has invalid explicit curve parameters. Since certificate parsing happens prior to verification of the certificate signature, any process that parses an externally supplied certificate may thus be subject to a denial of service attack. The infinite loop can also be reached when parsing crafted private keys as they can contain explicit elliptic curve parameters.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-0778"
    },
    {
      "cve": "CVE-2022-1271",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An arbitrary file write vulnerability was found in GNU gzip\u0027s zgrep utility. When zgrep is applied on the attacker\u0027s chosen file name (for example, a crafted file name), this can overwrite an attacker\u0027s content to an arbitrary attacker-selected file. This flaw occurs due to insufficient validation when processing filenames with two or more newlines where selected content and the target file names are embedded in crafted multi-line file names. This flaw allows a remote, low privileged attacker to force zgrep to write arbitrary files on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-1271"
    },
    {
      "cve": "CVE-2022-1292",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The c_rehash script does not properly sanitise shell metacharacters to prevent command injection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-1292"
    },
    {
      "cve": "CVE-2022-1304",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds read/write vulnerability was found in e2fsprogs 1.46.5. This issue leads to a segmentation fault and possibly arbitrary code execution via a specially crafted filesystem.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-1304"
    },
    {
      "cve": "CVE-2022-1343",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Under certain circumstances, the command line OCSP verify function reports successful verification when the verification in fact failed. In this case the incorrect successful response will also be accompanied by error messages showing the failure and contradicting the apparently successful result.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-1343"
    },
    {
      "cve": "CVE-2022-1434",
      "cwe": {
        "id": "CWE-327",
        "name": "Use of a Broken or Risky Cryptographic Algorithm"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When using the RC4-MD5 ciphersuite, which is disabled by default, an attacker is able to modify data in transit due to an incorrect use of the AAD data as the MAC key in OpenSSL 3.0. An attacker is not able to decrypt any communication.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-1434"
    },
    {
      "cve": "CVE-2022-1473",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The used OpenSSL version improperly reuses memory when decoding certificates or keys. This can lead to a process termination and Denial of Service for long lived processes.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-1473"
    },
    {
      "cve": "CVE-2022-2068",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In addition to the c_rehash shell command injection identified in CVE-2022-1292, further circumstances where the c_rehash script does not properly sanitise shell metacharacters to prevent command injection were found by code review. When the CVE-2022-1292 was fixed it was not discovered that there are other places in the script where the file names of certificates being hashed were possibly passed to a command executed through the shell. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-2068"
    },
    {
      "cve": "CVE-2022-2097",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "AES OCB mode for 32-bit x86 platforms using the AES-NI assembly optimised implementation will not encrypt the entirety of the data under some circumstances. This could reveal sixteen bytes of data that was preexisting in the memory that wasn\u0027t written. In the special case of \"in place\" encryption, sixteen bytes of the plaintext would be revealed. Since OpenSSL does not support OCB based cipher suites for TLS and DTLS, they are both unaffected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-2097"
    },
    {
      "cve": "CVE-2022-2274",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The OpenSSL 3.0.4 release introduced a serious bug in the RSA implementation for X86_64 CPUs supporting the AVX512IFMA instructions. This issue makes the RSA implementation with 2048 bit private keys incorrect on such machines and memory corruption will happen during the computation. As a consequence of the memory corruption an attacker may be able to trigger a remote code execution on the machine performing the computation. SSL/TLS servers or other servers using 2048 bit RSA private keys running on machines supporting AVX512IFMA instructions of the X86_64 architecture are affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-2274"
    },
    {
      "cve": "CVE-2022-2509",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability found in gnutls. This security flaw happens because of a double free error occurs during verification of pkcs7 signatures in gnutls_pkcs7_verify function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-2509"
    },
    {
      "cve": "CVE-2022-3715",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the bash package, where a heap-buffer overflow can occur in valid parameter_transform. This issue may lead to memory problems.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-3715"
    },
    {
      "cve": "CVE-2022-3821",
      "cwe": {
        "id": "CWE-193",
        "name": "Off-by-one Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An off-by-one Error issue was discovered in Systemd in format_timespan() function of time-util.c. An attacker could supply specific values for time and accuracy that leads to buffer overrun in format_timespan(), leading to a Denial of Service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-3821"
    },
    {
      "cve": "CVE-2022-4304",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful decryption an attacker would have to be able to send a very large number of trial messages for decryption. The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An attacker that had observed a genuine connection between a client and a server could use this flaw to send trial messages to the server and record the time taken to process them. After a sufficiently large number of messages the attacker could recover the pre-master secret used for the original connection and thus be able to decrypt the application data sent over that connection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-4304"
    },
    {
      "cve": "CVE-2022-4450",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the \"name\" (e.g. \"CERTIFICATE\"), any header data and the payload data. If the function succeeds then the \"name_out\", \"header\" and \"data\" arguments are populated with pointers to buffers containing the relevant decoded data. The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate the header argument with a pointer to a buffer that has already been freed. If the caller also frees this buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and therefore these functions are also directly affected. These functions are also called indirectly by a number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file() which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL asn1parse command line application is also impacted by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-4450"
    },
    {
      "cve": "CVE-2022-22576",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-22576"
    },
    {
      "cve": "CVE-2022-22822",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "addBinding in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-22822"
    },
    {
      "cve": "CVE-2022-22823",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "build_model in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-22823"
    },
    {
      "cve": "CVE-2022-22824",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "defineAttribute in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-22824"
    },
    {
      "cve": "CVE-2022-22825",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "lookup in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-22825"
    },
    {
      "cve": "CVE-2022-22826",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nextScaffoldPart in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-22826"
    },
    {
      "cve": "CVE-2022-22827",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "storeAtts in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-22827"
    },
    {
      "cve": "CVE-2022-23218",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The deprecated compatibility function svcunix_create in the sunrpc module of the GNU C Library (aka glibc) through 2.34 copies its path argument on the stack without validating its length, which may result in a buffer overflow, potentially resulting in a denial of service or (if an application is not built with a stack protector enabled) arbitrary code execution.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-23218"
    },
    {
      "cve": "CVE-2022-23219",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The deprecated compatibility function clnt_create in the sunrpc module of the GNU C Library (aka glibc) through 2.34 copies its hostname argument on the stack without validating its length, which may result in a buffer overflow, potentially resulting in a denial of service or (if an application is not built with a stack protector enabled) arbitrary code execution.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-23219"
    },
    {
      "cve": "CVE-2022-23308",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "valid.c in libxml2 before 2.9.13 has a use-after-free of ID and IDREF attributes.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-23308"
    },
    {
      "cve": "CVE-2022-23852",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Expat (aka libexpat) before 2.4.4 has a signed integer overflow in XML_GetBuffer, for configurations with a nonzero XML_CONTEXT_BYTES.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-23852"
    },
    {
      "cve": "CVE-2022-23990",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Expat (aka libexpat) before 2.4.4 has an integer overflow in the doProlog function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-23990"
    },
    {
      "cve": "CVE-2022-24407",
      "cwe": {
        "id": "CWE-89",
        "name": "Improper Neutralization of Special Elements used in an SQL Command (\u0027SQL Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Cyrus SASL 2.1.17 through 2.1.27 before 2.1.28, plugins/sql.c does not escape the password for a SQL INSERT or UPDATE statement.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-24407"
    },
    {
      "cve": "CVE-2022-25235",
      "cwe": {
        "id": "CWE-116",
        "name": "Improper Encoding or Escaping of Output"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmltok_impl.c in Expat (aka libexpat) before 2.4.5 lacks certain validation of encoding, such as checks for whether a UTF-8 character is valid in a certain context.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-25235"
    },
    {
      "cve": "CVE-2022-25236",
      "cwe": {
        "id": "CWE-668",
        "name": "Exposure of Resource to Wrong Sphere"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmlparse.c in Expat (aka libexpat) before 2.4.5 allows attackers to insert namespace-separator characters into namespace URIs.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-25236"
    },
    {
      "cve": "CVE-2022-25313",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Expat (aka libexpat) before 2.4.5, an attacker can trigger stack exhaustion in build_model via a large nesting depth in the DTD element.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-25313"
    },
    {
      "cve": "CVE-2022-25314",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Expat (aka libexpat) before 2.4.5, there is an integer overflow in copyString.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-25314"
    },
    {
      "cve": "CVE-2022-25315",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Expat (aka libexpat) before 2.4.5, there is an integer overflow in storeRawNames.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-25315"
    },
    {
      "cve": "CVE-2022-26488",
      "cwe": {
        "id": "CWE-426",
        "name": "Untrusted Search Path"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python before 3.10.3 on Windows, local users can gain privileges because the search path is inadequately secured. The installer may allow a local attacker to add user-writable directories to the system search path. To exploit, an administrator must have installed Python for all users and enabled PATH entries. A non-administrative user can trigger a repair that incorrectly adds user-writable paths into PATH, enabling search-path hijacking of other users and system services. This affects Python (CPython) through 3.7.12, 3.8.x through 3.8.12, 3.9.x through 3.9.10, and 3.10.x through 3.10.2.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-26488"
    },
    {
      "cve": "CVE-2022-27774",
      "cwe": {
        "id": "CWE-522",
        "name": "Insufficiently Protected Credentials"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27774"
    },
    {
      "cve": "CVE-2022-27775",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an IPv6 address that was in the connection pool but with a different zone id it could reuse a connection instead.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27775"
    },
    {
      "cve": "CVE-2022-27776",
      "cwe": {
        "id": "CWE-522",
        "name": "Insufficiently Protected Credentials"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27776"
    },
    {
      "cve": "CVE-2022-27778",
      "cwe": {
        "id": "CWE-706",
        "name": "Use of Incorrectly-Resolved Name or Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use of incorrectly resolved name vulnerability fixed in 7.83.1 might remove the wrong file when `--no-clobber` is used together with `--remove-on-error`.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27778"
    },
    {
      "cve": "CVE-2022-27779",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl wrongly allows cookies to be set for Top Level Domains (TLDs) if thehost name is provided with a trailing dot.curl can be told to receive and send cookies. curl\u0027s \"cookie engine\" can bebuilt with or without [Public Suffix List](https://publicsuffix.org/)awareness. If PSL support not provided, a more rudimentary check exists to atleast prevent cookies from being set on TLDs. This check was broken if thehost name in the URL uses a trailing dot.This can allow arbitrary sites to set cookies that then would get sent to adifferent and unrelated site or domain.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27779"
    },
    {
      "cve": "CVE-2022-27780",
      "cwe": {
        "id": "CWE-918",
        "name": "Server-Side Request Forgery (SSRF)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The curl URL parser wrongly accepts percent-encoded URL separators like \u0027/\u0027when decoding the host name part of a URL, making it a *different* URL usingthe wrong host name when it is later retrieved.For example, a URL like `http://example.com%2F127.0.0.1/`, would be allowed bythe parser and get transposed into `http://example.com/127.0.0.1/`. This flawcan be used to circumvent filters, checks and more.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27780"
    },
    {
      "cve": "CVE-2022-27781",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl provides the `CURLOPT_CERTINFO` option to allow applications torequest details to be returned about a server\u0027s certificate chain.Due to an erroneous function, a malicious server could make libcurl built withNSS get stuck in a never-ending busy-loop when trying to retrieve thatinformation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27781"
    },
    {
      "cve": "CVE-2022-27782",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were left out from the configuration match checks, making themmatch too easily.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27782"
    },
    {
      "cve": "CVE-2022-27943",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libiberty/rust-demangle.c in GNU GCC 11.2 allows stack consumption in demangle_const, as demonstrated by nm-new.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27943"
    },
    {
      "cve": "CVE-2022-28321",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Linux-PAM package before 1.5.2-6.1 for openSUSE Tumbleweed allows authentication bypass for SSH logins. The pam_access.so module doesn\u0027t correctly restrict login if a user tries to connect from an IP address that is not resolvable via DNS. In such conditions, a user with denied access to a machine can still get access. NOTE: the relevance of this issue is largely limited to openSUSE Tumbleweed and openSUSE Factory; it does not affect Linux-PAM upstream.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-28321"
    },
    {
      "cve": "CVE-2022-29155",
      "cwe": {
        "id": "CWE-89",
        "name": "Improper Neutralization of Special Elements used in an SQL Command (\u0027SQL Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In OpenLDAP 2.x before 2.5.12 and 2.6.x before 2.6.2, a SQL injection vulnerability exists in the experimental back-sql backend to slapd, via a SQL statement within an LDAP query. This can occur during an LDAP search operation when the search filter is processed, due to a lack of proper escaping.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-29155"
    },
    {
      "cve": "CVE-2022-29824",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libxml2 before 2.9.14, several buffer handling functions in buf.c (xmlBuf*) and tree.c (xmlBuffer*) don\u0027t check for integer overflows. This can result in out-of-bounds memory writes. Exploitation requires a victim to open a crafted, multi-gigabyte XML file. Other software using libxml2\u0027s buffer functions, for example libxslt through 1.1.35, is affected as well.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-29824"
    },
    {
      "cve": "CVE-2022-30115",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Using its HSTS support, curl can be instructed to use HTTPS directly insteadof using an insecure clear-text HTTP step even when HTTP is provided in theURL. This mechanism could be bypassed if the host name in the given URL used atrailing dot while not using one when it built the HSTS cache. Or the otherway around - by having the trailing dot in the HSTS cache and *not* using thetrailing dot in the URL.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-30115"
    },
    {
      "cve": "CVE-2022-32205",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A malicious server can serve excessive amounts of \"Set-Cookie:\" headers in a HTTP response to curl and curl \u003c 7.84.0 stores all of them. A sufficiently large amount of (big) cookies make subsequent HTTP requests to this, or other servers to which the cookies match, create requests that become larger than the threshold that curl uses internally to avoid sending crazy large requests (1048576 bytes) and instead returns an error.This denial state might remain for as long as the same cookies are kept, match and haven\u0027t expired. Due to cookie matching rules, a server on \"foo.example.com\" can set cookies that also would match for \"bar.example.com\", making it it possible for a \"sister server\" to effectively cause a denial of service for a sibling site on the same second level domain using this method.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-32205"
    },
    {
      "cve": "CVE-2022-32206",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl \u003c 7.84.0 supports \"chained\" HTTP compression algorithms, meaning that a serverresponse can be compressed multiple times and potentially with different algorithms. The number of acceptable \"links\" in this \"decompression chain\" was unbounded, allowing a malicious server to insert a virtually unlimited number of compression steps.The use of such a decompression chain could result in a \"malloc bomb\", makingcurl end up spending enormous amounts of allocated heap memory, or trying toand returning out of memory errors.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-32206"
    },
    {
      "cve": "CVE-2022-32207",
      "cwe": {
        "id": "CWE-276",
        "name": "Incorrect Default Permissions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl \u003c 7.84.0 saves cookies, alt-svc and hsts data to local files, it makes the operation atomic by finalizing the operation with a rename from a temporary name to the final target file name.In that rename operation, it might accidentally *widen* the permissions for the target file, leaving the updated file accessible to more users than intended.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-32207"
    },
    {
      "cve": "CVE-2022-32208",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl \u003c 7.84.0 does FTP transfers secured by krb5, it handles message verification failures wrongly. This flaw makes it possible for a Man-In-The-Middle attack to go unnoticed and even allows it to inject data to the client.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-32208"
    },
    {
      "cve": "CVE-2022-32221",
      "cwe": {
        "id": "CWE-440",
        "name": "Expected Behavior Violation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When doing HTTP(S) transfers, libcurl might erroneously use the read callback (`CURLOPT_READFUNCTION`) to ask for data to send, even when the `CURLOPT_POSTFIELDS` option has been set, if the same handle previously was used to issue a `PUT` request which used that callback. This flaw may surprise the application and cause it to misbehave and either send off the wrong data or use memory after free or similar in the subsequent `POST` request. The problem exists in the logic for a reused handle when it is changed from a PUT to a POST.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-32221"
    },
    {
      "cve": "CVE-2022-35252",
      "cwe": {
        "id": "CWE-1286",
        "name": "Improper Validation of Syntactic Correctness of Input"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl is used to retrieve and parse cookies from a HTTP(S) server, itaccepts cookies using control codes that when later are sent back to a HTTPserver might make the server return 400 responses. Effectively allowing a\"sister site\" to deny service to all siblings.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-35252"
    },
    {
      "cve": "CVE-2022-35260",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl can be told to parse a `.netrc` file for credentials. If that file endsin a line with 4095 consecutive non-white space letters and no newline, curlwould first read past the end of the stack-based buffer, and if the readworks, write a zero byte beyond its boundary.This will in most cases cause a segfault or similar, but circumstances might also cause different outcomes.If a malicious user can provide a custom netrc file to an application or otherwise affect its contents, this flaw could be used as denial-of-service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-35260"
    },
    {
      "cve": "CVE-2022-35737",
      "cwe": {
        "id": "CWE-129",
        "name": "Improper Validation of Array Index"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 1.0.12 through 3.39.x before 3.39.2 sometimes allows an array-bounds overflow if billions of bytes are used in a string argument to a C API.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-35737"
    },
    {
      "cve": "CVE-2022-37434",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "zlib through 1.2.12 has a heap-based buffer over-read or buffer overflow in inflate in inflate.c via a large gzip header extra field. NOTE: only applications that call inflateGetHeader are affected. Some common applications bundle the affected zlib source code but may be unable to call inflateGetHeader (e.g., see the nodejs/node reference).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-37434"
    },
    {
      "cve": "CVE-2022-37454",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Keccak XKCP SHA-3 reference implementation before fdc6fef has an integer overflow and resultant buffer overflow that allows attackers to execute arbitrary code or eliminate expected cryptographic properties. This occurs in the sponge function interface.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-37454"
    },
    {
      "cve": "CVE-2022-40303",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.3. When parsing a multi-gigabyte XML document with the XML_PARSE_HUGE parser option enabled, several integer counters can overflow. This results in an attempt to access an array at a negative 2GB offset, typically leading to a segmentation fault.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-40303"
    },
    {
      "cve": "CVE-2022-40304",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.3. Certain invalid XML entity definitions can corrupt a hash table key, potentially leading to subsequent logic errors. In one case, a double-free can be provoked.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-40304"
    },
    {
      "cve": "CVE-2022-40674",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libexpat before 2.4.9 has a use-after-free in the doContent function in xmlparse.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-40674"
    },
    {
      "cve": "CVE-2022-42898",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "PAC parsing in MIT Kerberos 5 (aka krb5) before 1.19.4 and 1.20.x before 1.20.1 has integer overflows that may lead to remote code execution (in KDC, kadmind, or a GSS or Kerberos application server) on 32-bit platforms (which have a resultant heap-based buffer overflow), and cause a denial of service on other platforms. This occurs in krb5_pac_parse in lib/krb5/krb/pac.c. Heimdal before 7.7.1 has \"a similar bug.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-42898"
    },
    {
      "cve": "CVE-2022-42915",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl before 7.86.0 has a double free. If curl is told to use an HTTP proxy for a transfer with a non-HTTP(S) URL, it sets up the connection to the remote server by issuing a CONNECT request to the proxy, and then tunnels the rest of the protocol through. An HTTP proxy might refuse this request (HTTP proxies often only allow outgoing connections to specific port numbers, like 443 for HTTPS) and instead return a non-200 status code to the client. Due to flaws in the error/cleanup handling, this could trigger a double free in curl if one of the following schemes were used in the URL for the transfer: dict, gopher, gophers, ldap, ldaps, rtmp, rtmps, or telnet. The earliest affected version is 7.77.0.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-42915"
    },
    {
      "cve": "CVE-2022-42916",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In curl before 7.86.0, the HSTS check could be bypassed to trick it into staying with HTTP. Using its HSTS support, curl can be instructed to use HTTPS directly (instead of using an insecure cleartext HTTP step) even when HTTP is provided in the URL. This mechanism could be bypassed if the host name in the given URL uses IDN characters that get replaced with ASCII counterparts as part of the IDN conversion, e.g., using the character UTF-8 U+3002 (IDEOGRAPHIC FULL STOP) instead of the common ASCII full stop of U+002E (.). The earliest affected version is 7.77.0 2021-05-26.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-42916"
    },
    {
      "cve": "CVE-2022-43551",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability exists in curl \u003c7.87.0 HSTS check that could be bypassed to trick it to keep using HTTP. Using its HSTS support, curl can be instructed to use HTTPS instead of using an insecure clear-text HTTP step even when HTTP is provided in the URL. However, the HSTS mechanism could be bypassed if the host name in the given URL first uses IDN characters that get replaced to ASCII counterparts as part of the IDN conversion. Like using the character UTF-8 U+3002 (IDEOGRAPHIC FULL STOP) instead of the common ASCII full stop U+002E (.). Then in a subsequent request, it does not detect the HSTS state and makes a clear text transfer. Because it would store the info IDN encoded but look for it IDN decoded.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-43551"
    },
    {
      "cve": "CVE-2022-43552",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl can be asked to tunnel virtually all protocols it supports through an HTTP proxy. HTTP proxies can (and often do) deny such tunnel operations using an appropriate HTTP error response code. When getting denied to tunnel the specific protocols SMB or TELNET, curl would use a heap-allocated struct after it had been freed, in its transfer shutdown code path.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-43552"
    },
    {
      "cve": "CVE-2022-43680",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libexpat through 2.4.9, there is a use-after free caused by overeager destruction of a shared DTD in XML_ExternalEntityParserCreate in out-of-memory situations.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-43680"
    },
    {
      "cve": "CVE-2022-45061",
      "cwe": {
        "id": "CWE-407",
        "name": "Inefficient Algorithmic Complexity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in Python before 3.11.1. An unnecessary quadratic algorithm exists in one path when processing some inputs to the IDNA (RFC 3490) decoder, such that a crafted, unreasonably long name being presented to the decoder could lead to a CPU denial of service. Hostnames are often supplied by remote servers that could be controlled by a malicious actor; in such a scenario, they could trigger excessive CPU consumption on the client attempting to make use of an attacker-supplied supposed hostname. For example, the attack payload could be placed in the Location header of an HTTP response with status code 302. A fix is planned in 3.11.1, 3.10.9, 3.9.16, 3.8.16, and 3.7.16.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-45061"
    },
    {
      "cve": "CVE-2022-45873",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "systemd 250 and 251 allows local users to achieve a systemd-coredump deadlock by triggering a crash that has a long backtrace. This occurs in parse_elf_object in shared/elf-util.c. The exploitation methodology is to crash a binary calling the same function recursively, and put it in a deeply nested directory to make its backtrace large enough to cause the deadlock. This must be done 16 times when MaxConnections=16 is set for the systemd/units/systemd-coredump.socket file.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-45873"
    },
    {
      "cve": "CVE-2022-46908",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite through 3.40.0, when relying on --safe for execution of an untrusted CLI script, does not properly implement the azProhibitedFunctions protection mechanism, and instead allows UDF functions such as WRITEFILE.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-46908"
    },
    {
      "cve": "CVE-2022-48303",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU Tar through 1.34 has a one-byte out-of-bounds read that results in use of uninitialized memory for a conditional jump. Exploitation to change the flow of control has not been demonstrated. The issue occurs in from_header in list.c via a V7 archive in which mtime has approximately 11 whitespace characters.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-48303"
    },
    {
      "cve": "CVE-2022-48522",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Perl 5.34.0, function S_find_uninit_var in sv.c has a stack-based crash that can lead to remote code execution or local privilege escalation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-48522"
    },
    {
      "cve": "CVE-2022-48560",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free exists in Python through 3.9 via heappushpop in heapq.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-48560"
    },
    {
      "cve": "CVE-2023-0215",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may also be called directly by end user applications. The function receives a BIO from the caller, prepends a new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid, the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call BIO_pop() on the BIO. This internal function is in turn called by the public API functions PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1, SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL cms and smime command line applications are similarly affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-0215"
    },
    {
      "cve": "CVE-2023-0286",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName. X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these inputs, the other input must already contain an X.400 address as a CRL distribution point, which is uncommon. As such, this vulnerability is most likely to only affect applications which have implemented their own functionality for retrieving CRLs over a network.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-0286"
    },
    {
      "cve": "CVE-2023-0361",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing side-channel in the handling of RSA ClientKeyExchange messages was discovered in GnuTLS. This side-channel can be sufficient to recover the key encrypted in the RSA ciphertext across a network in a Bleichenbacher style attack. To achieve a successful decryption the attacker would need to send a large amount of specially crafted messages to the vulnerable server. By recovering the secret from the ClientKeyExchange message, the attacker would be able to decrypt the application data exchanged over that connection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-0361"
    },
    {
      "cve": "CVE-2023-0464",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security vulnerability has been identified in all supported versions of OpenSSL related to the verification of X.509 certificate chains that include policy constraints. Attackers may be able to exploit this vulnerability by creating a malicious certificate chain that triggers exponential use of computational resources, leading to a denial-of-service (DoS) attack on affected systems.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing the `-policy` argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-0464"
    },
    {
      "cve": "CVE-2023-0465",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Applications that use a non-default option when verifying certificates may be\r\nvulnerable to an attack from a malicious CA to circumvent certain checks.\r\n\r\nInvalid certificate policies in leaf certificates are silently ignored by\r\nOpenSSL and other certificate policy checks are skipped for that certificate.\r\nA malicious CA could use this to deliberately assert invalid certificate policies\r\nin order to circumvent policy checking on the certificate altogether.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing\r\nthe `-policy` argument to the command line utilities or by calling the\r\n`X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-0465"
    },
    {
      "cve": "CVE-2023-0466",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function X509_VERIFY_PARAM_add0_policy() is documented to\nimplicitly enable the certificate policy check when doing certificate\nverification. However the implementation of the function does not\nenable the check which allows certificates with invalid or incorrect\npolicies to pass the certificate verification.\n\nAs suddenly enabling the policy check could break existing deployments it was\ndecided to keep the existing behavior of the X509_VERIFY_PARAM_add0_policy()\nfunction.\n\nInstead the applications that require OpenSSL to perform certificate\npolicy check need to use X509_VERIFY_PARAM_set1_policies() or explicitly\nenable the policy check by calling X509_VERIFY_PARAM_set_flags() with\nthe X509_V_FLAG_POLICY_CHECK flag argument.\n\nCertificate policy checks are disabled by default in OpenSSL and are not\ncommonly used by applications.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-0466"
    },
    {
      "cve": "CVE-2023-0687",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in GNU C Library 2.38. It has been declared as critical. This vulnerability affects the function __monstartup of the file gmon.c of the component Call Graph Monitor. The manipulation leads to buffer overflow. It is recommended to apply a patch to fix this issue. VDB-220246 is the identifier assigned to this vulnerability. NOTE: The real existence of this vulnerability is still doubted at the moment. The inputs that induce this vulnerability are basically addresses of the running application that is built with gmon enabled. It\u0027s basically trusted input or input that needs an actual security flaw to be compromised or controlled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:H/PR:L/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-0687"
    },
    {
      "cve": "CVE-2023-1077",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, pick_next_rt_entity() may return a type confused entry, not detected by the BUG_ON condition, as the confused entry will not be NULL, but list_head.The buggy error condition would lead to a type confused entry with the list head,which would then be used as a type confused sched_rt_entity,causing memory corruption.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-1077"
    },
    {
      "cve": "CVE-2023-1206",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A hash collision flaw was found in the IPv6 connection lookup table in the Linux kernel\u2019s IPv6 functionality when a user makes a new kind of SYN flood attack. A user located in the local network or with a high bandwidth connection can increase the CPU usage of the server that accepts IPV6 connections up to 95%.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-1206"
    },
    {
      "cve": "CVE-2023-2650",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Processing some specially crafted ASN.1 object identifiers or data containing them may be very slow. Impact summary: Applications that use OBJ_obj2txt() directly, or use any of the OpenSSL subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS with no message size limit may experience notable to very long delays when processing those messages, which may lead to a Denial of Service. An OBJECT IDENTIFIER is composed of a series of numbers - sub-identifiers - most of which have no size limit. OBJ_obj2txt() may be used to translate an ASN.1 OBJECT IDENTIFIER given in DER encoding form (using the OpenSSL type ASN1_OBJECT) to its canonical numeric text form, which are the sub-identifiers of the OBJECT IDENTIFIER in decimal form, separated by periods. When one of the sub-identifiers in the OBJECT IDENTIFIER is very large (these are sizes that are seen as absurdly large, taking up tens or hundreds of KiBs), the translation to a decimal number in text may take a very long time. The time complexity is O(square(n)) with \u0027n\u0027 being the size of the sub-identifiers in bytes (*). With OpenSSL 3.0, support to fetch cryptographic algorithms using names / identifiers in string form was introduced. This includes using OBJECT IDENTIFIERs in canonical numeric text form as identifiers for fetching algorithms. Such OBJECT IDENTIFIERs may be received through the ASN.1 structure AlgorithmIdentifier, which is commonly used in multiple protocols to specify what cryptographic algorithm should be used to sign or verify, encrypt or decrypt, or digest passed data. Applications that call OBJ_obj2txt() directly with untrusted data are affected, with any version of OpenSSL. If the use is for the mere purpose of display, the severity is considered low. In OpenSSL 3.0 and newer, this affects the subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS. It also impacts anything that processes X.509 certificates, including simple things like verifying its signature. The impact on TLS is relatively low, because all versions of OpenSSL have a 100KiB limit on the peer\u0027s certificate chain. Additionally, this only impacts clients, or servers that have explicitly enabled client authentication. In OpenSSL 1.1.1 and 1.0.2, this only affects displaying diverse objects, such as X.509 certificates. This is assumed to not happen in such a way that it would cause a Denial of Service, so these versions are considered not affected by this issue in such a way that it would be cause for concern, and the severity is therefore considered low.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-2650"
    },
    {
      "cve": "CVE-2023-2953",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in openldap. This security flaw causes a null pointer dereference in ber_memalloc_x() function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-2953"
    },
    {
      "cve": "CVE-2023-3212",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference issue was found in the gfs2 file system in the Linux kernel. It occurs on corrupt gfs2 file systems when the evict code tries to reference the journal descriptor structure after it has been freed and set to NULL. A privileged local user could use this flaw to cause a kernel panic.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-3212"
    },
    {
      "cve": "CVE-2023-3446",
      "cwe": {
        "id": "CWE-1333",
        "name": "Inefficient Regular Expression Complexity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus (\u0027p\u0027 parameter) is not too large. Trying to use a very large modulus is slow and OpenSSL will not normally use a modulus which is over 10,000 bits in length. However the DH_check() function checks numerous aspects of the key or parameters that have been supplied. Some of those checks use the supplied modulus value even if it has already been found to be too large. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulernable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \u0027-check\u0027 option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-3446"
    },
    {
      "cve": "CVE-2023-3609",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: cls_u32 component can be exploited to achieve local privilege escalation.\r\n\r\nIf tcf_change_indev() fails, u32_set_parms() will immediately return an error after incrementing or decrementing the reference counter in tcf_bind_filter(). If an attacker can control the reference counter and set it to zero, they can cause the reference to be freed, leading to a use-after-free vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-3609"
    },
    {
      "cve": "CVE-2023-3611",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds write vulnerability in the Linux kernel\u0027s net/sched: sch_qfq component can be exploited to achieve local privilege escalation.\r\n\r\nThe qfq_change_agg() function in net/sched/sch_qfq.c allows an out-of-bounds write because lmax is updated according to packet sizes without bounds checks.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-3611"
    },
    {
      "cve": "CVE-2023-3772",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel\u0027s IP framework for transforming packets (XFRM subsystem). This issue may allow a malicious user with CAP_NET_ADMIN privileges to directly dereference a NULL pointer in xfrm_update_ae_params(), leading to a possible kernel crash and denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-3772"
    },
    {
      "cve": "CVE-2023-3817",
      "cwe": {
        "id": "CWE-834",
        "name": "Excessive Iteration"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. After fixing CVE-2023-3446 it was discovered that a large q parameter value can also trigger an overly long computation during some of these checks. A correct q value, if present, cannot be larger than the modulus p parameter, thus it is unnecessary to perform these checks if q is larger than p. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \"-check\" option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-3817"
    },
    {
      "cve": "CVE-2023-4016",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Under some circumstances, this weakness allows a user who has access to run the \u201cps\u201d utility on a machine, the ability to write almost unlimited amounts of unfiltered data into the process heap.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 2.5,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4016"
    },
    {
      "cve": "CVE-2023-4039",
      "cwe": {
        "id": "CWE-693",
        "name": "Protection Mechanism Failure"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A failure in the -fstack-protector feature in GCC-based toolchains \nthat target AArch64 allows an attacker to exploit an existing buffer \noverflow in dynamically-sized local variables in your application \nwithout this being detected. This stack-protector failure only applies \nto C99-style dynamically-sized local variables or those created using \nalloca(). The stack-protector operates as intended for statically-sized \nlocal variables.\n\nThe default behavior when the stack-protector \ndetects an overflow is to terminate your application, resulting in \ncontrolled loss of availability. An attacker who can exploit a buffer \noverflow without triggering the stack-protector might be able to change \nprogram flow control to cause an uncontrolled loss of availability or to\n go further and affect confidentiality or integrity.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4039"
    },
    {
      "cve": "CVE-2023-4527",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. When the getaddrinfo function is called with the AF_UNSPEC address family and the system is configured with no-aaaa mode via /etc/resolv.conf, a DNS response via TCP larger than 2048 bytes can potentially disclose stack contents through the function returned address data, and may cause a crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4527"
    },
    {
      "cve": "CVE-2023-4623",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: sch_hfsc (HFSC qdisc traffic control) component can be exploited to achieve local privilege escalation.\n\nIf a class with a link-sharing curve (i.e. with the HFSC_FSC flag set) has a parent without a link-sharing curve, then init_vf() will call vttree_insert() on the parent, but vttree_remove() will be skipped in update_vf(). This leaves a dangling pointer that can cause a use-after-free.\n\nWe recommend upgrading past commit b3d26c5702c7d6c45456326e56d2ccf3f103e60f.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4623"
    },
    {
      "cve": "CVE-2023-4806",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. In an extremely rare situation, the getaddrinfo function may access memory that has been freed, resulting in an application crash. This issue is only exploitable when a NSS module implements only the _nss_*_gethostbyname2_r and _nss_*_getcanonname_r hooks without implementing the _nss_*_gethostbyname3_r hook. The resolved name should return a large number of IPv6 and IPv4, and the call to the getaddrinfo function should have the AF_INET6 address family with AI_CANONNAME, AI_ALL and AI_V4MAPPED as flags.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4806"
    },
    {
      "cve": "CVE-2023-4807",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: The POLY1305 MAC (message authentication code) implementation contains a bug that might corrupt the internal state of applications on the Windows 64 platform when running on newer X86_64 processors supporting the AVX512-IFMA instructions. Impact summary: If in an application that uses the OpenSSL library an attacker can influence whether the POLY1305 MAC algorithm is used, the application state might be corrupted with various application dependent consequences. The POLY1305 MAC (message authentication code) implementation in OpenSSL does not save the contents of non-volatile XMM registers on Windows 64 platform when calculating the MAC of data larger than 64 bytes. Before returning to the caller all the XMM registers are set to zero rather than restoring their previous content. The vulnerable code is used only on newer x86_64 processors supporting the AVX512-IFMA instructions. The consequences of this kind of internal application state corruption can be various - from no consequences, if the calling application does not depend on the contents of non-volatile XMM registers at all, to the worst consequences, where the attacker could get complete control of the application process. However given the contents of the registers are just zeroized so the attacker cannot put arbitrary values inside, the most likely consequence, if any, would be an incorrect result of some application dependent calculations or a crash leading to a denial of service. The POLY1305 MAC algorithm is most frequently used as part of the CHACHA20-POLY1305 AEAD (authenticated encryption with associated data) algorithm. The most common usage of this AEAD cipher is with TLS protocol versions 1.2 and 1.3 and a malicious client can influence whether this AEAD cipher is used by the server. This implies that server applications using OpenSSL can be potentially impacted. However we are currently not aware of any concrete application that would be affected by this issue therefore we consider this a Low severity security issue. As a workaround the AVX512-IFMA instructions support can be disabled at runtime by setting the environment variable OPENSSL_ia32cap: OPENSSL_ia32cap=:~0x200000 The FIPS provider is not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4807"
    },
    {
      "cve": "CVE-2023-4813",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. In an uncommon situation, the gaih_inet function may use memory that has been freed, resulting in an application crash. This issue is only exploitable when the getaddrinfo function is called and the hosts database in /etc/nsswitch.conf is configured with SUCCESS=continue or SUCCESS=merge.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4813"
    },
    {
      "cve": "CVE-2023-4911",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A buffer overflow was discovered in the GNU C Library\u0027s dynamic loader ld.so while processing the GLIBC_TUNABLES environment variable. This issue could allow a local attacker to use maliciously crafted GLIBC_TUNABLES environment variables when launching binaries with SUID permission to execute code with elevated privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4911"
    },
    {
      "cve": "CVE-2023-4921",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: sch_qfq component can be exploited to achieve local privilege escalation.\n\nWhen the plug qdisc is used as a class of the qfq qdisc, sending network packets triggers use-after-free in qfq_dequeue() due to the incorrect .peek handler of sch_plug and lack of error checking in agg_dequeue().\n\nWe recommend upgrading past commit 8fc134fee27f2263988ae38920bc03da416b03d8.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4921"
    },
    {
      "cve": "CVE-2023-5156",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the GNU C Library. A recent fix for CVE-2023-4806 introduced the potential for a memory leak, which may result in an application crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-5156"
    },
    {
      "cve": "CVE-2023-5678",
      "cwe": {
        "id": "CWE-754",
        "name": "Improper Check for Unusual or Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Generating excessively long X9.42 DH keys or checking excessively long X9.42 DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_generate_key() to generate an X9.42 DH key may experience long delays. Likewise, applications that use DH_check_pub_key(), DH_check_pub_key_ex() or EVP_PKEY_public_check() to check an X9.42 DH key or X9.42 DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. While DH_check() performs all the necessary checks (as of CVE-2023-3817), DH_check_pub_key() doesn\u0027t make any of these checks, and is therefore vulnerable for excessively large P and Q parameters. Likewise, while DH_generate_key() performs a check for an excessively large P, it doesn\u0027t check for an excessively large Q. An application that calls DH_generate_key() or DH_check_pub_key() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. DH_generate_key() and DH_check_pub_key() are also called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_pub_key_ex(), EVP_PKEY_public_check(), and EVP_PKEY_generate(). Also vulnerable are the OpenSSL pkey command line application when using the \"-pubcheck\" option, as well as the OpenSSL genpkey command line application. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-5678"
    },
    {
      "cve": "CVE-2023-5717",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap out-of-bounds write vulnerability in the Linux kernel\u0027s Linux Kernel Performance Events (perf) component can be exploited to achieve local privilege escalation.\r\n\r\nIf perf_read_group() is called while an event\u0027s sibling_list is smaller than its child\u0027s sibling_list, it can increment or write to memory locations outside of the allocated buffer.\r\n\r\nWe recommend upgrading past commit 32671e3799ca2e4590773fd0e63aaa4229e50c06.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-5717"
    },
    {
      "cve": "CVE-2023-5981",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found that the response times to malformed ciphertexts in RSA-PSK ClientKeyExchange differ from response times of ciphertexts with correct PKCS#1 v1.5 padding.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-5981"
    },
    {
      "cve": "CVE-2023-6121",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds read vulnerability was found in the NVMe-oF/TCP subsystem in the Linux kernel. This issue may allow a remote attacker to send a crafted TCP packet, triggering a heap-based buffer overflow that results in kmalloc data being printed and potentially leaked to the kernel ring buffer (dmesg).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-6121"
    },
    {
      "cve": "CVE-2023-6817",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s netfilter: nf_tables component can be exploited to achieve local privilege escalation.\n\nThe function nft_pipapo_walk did not skip inactive elements during set walk which could lead double deactivations of PIPAPO (Pile Packet Policies) elements, leading to use-after-free.\n\nWe recommend upgrading past commit 317eb9685095678f2c9f5a8189de698c5354316a.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-6817"
    },
    {
      "cve": "CVE-2023-6931",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap out-of-bounds write vulnerability in the Linux kernel\u0027s Performance Events system component can be exploited to achieve local privilege escalation.\n\nA perf_event\u0027s read_size can overflow, leading to an heap out-of-bounds increment or write in perf_read_group().\n\nWe recommend upgrading past commit 382c27f4ed28f803b1f1473ac2d8db0afc795a1b.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-6931"
    },
    {
      "cve": "CVE-2023-6932",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s ipv4: igmp component can be exploited to achieve local privilege escalation.\n\nA race condition can be exploited to cause a timer be mistakenly registered on a RCU read locked object which is freed by another thread.\n\nWe recommend upgrading past commit e2b706c691905fe78468c361aaabc719d0a496f1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-6932"
    },
    {
      "cve": "CVE-2023-23914",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A cleartext transmission of sensitive information vulnerability exists in curl \u003cv7.88.0 that could cause HSTS functionality fail when multiple URLs are requested serially. Using its HSTS support, curl can be instructed to use HTTPS instead of usingan insecure clear-text HTTP step even when HTTP is provided in the URL. ThisHSTS mechanism would however surprisingly be ignored by subsequent transferswhen done on the same command line because the state would not be properlycarried on.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-23914"
    },
    {
      "cve": "CVE-2023-23915",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A cleartext transmission of sensitive information vulnerability exists in curl \u003cv7.88.0 that could cause HSTS functionality to behave incorrectly when multiple URLs are requested in parallel. Using its HSTS support, curl can be instructed to use HTTPS instead of using an insecure clear-text HTTP step even when HTTP is provided in the URL. This HSTS mechanism would however surprisingly fail when multiple transfers are done in parallel as the HSTS cache file gets overwritten by the most recentlycompleted transfer. A later HTTP-only transfer to the earlier host name would then *not* get upgraded properly to HSTS.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-23915"
    },
    {
      "cve": "CVE-2023-23916",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An allocation of resources without limits or throttling vulnerability exists in curl \u003cv7.88.0 based on the \"chained\" HTTP compression algorithms, meaning that a server response can be compressed multiple times and potentially with differentalgorithms. The number of acceptable \"links\" in this \"decompression chain\" wascapped, but the cap was implemented on a per-header basis allowing a maliciousserver to insert a virtually unlimited number of compression steps simply byusing many headers. The use of such a decompression chain could result in a \"malloc bomb\", making curl end up spending enormous amounts of allocated heap memory, or trying to and returning out of memory errors.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-23916"
    },
    {
      "cve": "CVE-2023-24329",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue in the urllib.parse component of Python before 3.11.4 allows attackers to bypass blocklisting methods by supplying a URL that starts with blank characters.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-24329"
    },
    {
      "cve": "CVE-2023-25136",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "OpenSSH server (sshd) 9.1 introduced a double-free vulnerability during options.kex_algorithms handling. This is fixed in OpenSSH 9.2. The double free can be leveraged, by an unauthenticated remote attacker in the default configuration, to jump to any location in the sshd address space. One third-party report states \"remote code execution is theoretically possible.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-25136"
    },
    {
      "cve": "CVE-2023-25139",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "sprintf in the GNU C Library (glibc) 2.37 has a buffer overflow (out-of-bounds write) in some situations with a correct buffer size. This is unrelated to CWE-676. It may write beyond the bounds of the destination buffer when attempting to write a padded, thousands-separated string representation of a number, if the buffer is allocated the exact size required to represent that number as a string. For example, 1,234,567 (with padding to 13) overflows by two bytes.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-25139"
    },
    {
      "cve": "CVE-2023-26604",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "systemd before 247 does not adequately block local privilege escalation for some Sudo configurations, e.g., plausible sudoers files in which the \"systemctl status\" command may be executed. Specifically, systemd does not set LESSSECURE to 1, and thus other programs may be launched from the less program. This presents a substantial security risk when running systemctl from Sudo, because less executes as root when the terminal size is too small to show the complete systemctl output.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-26604"
    },
    {
      "cve": "CVE-2023-27371",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU libmicrohttpd before 0.9.76 allows remote DoS (Denial of Service) due to improper parsing of a multipart/form-data boundary in the postprocessor.c MHD_create_post_processor() method. This allows an attacker to remotely send a malicious HTTP POST packet that includes one or more \u0027\\0\u0027 bytes in a multipart/form-data boundary field, which - assuming a specific heap layout - will result in an out-of-bounds read and a crash in the find_boundary() function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AC:H/AV:N/A:H/C:N/I:N/PR:N/S:U/UI:N",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-27371"
    },
    {
      "cve": "CVE-2023-27533",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability in input validation exists in curl \u003c8.0 during communication using the TELNET protocol may allow an attacker to pass on maliciously crafted user name and \"telnet options\" during server negotiation. The lack of proper input scrubbing allows an attacker to send content or perform option negotiation without the application\u0027s intent. This vulnerability could be exploited if an application allows user input, thereby enabling attackers to execute arbitrary code on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-27533"
    },
    {
      "cve": "CVE-2023-27534",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A path traversal vulnerability exists in curl \u003c8.0.0 SFTP implementation causes the tilde (~) character to be wrongly replaced when used as a prefix in the first path element, in addition to its intended use as the first element to indicate a path relative to the user\u0027s home directory. Attackers can exploit this flaw to bypass filtering or execute arbitrary code by crafting a path like /~2/foo while accessing a server with a specific user.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-27534"
    },
    {
      "cve": "CVE-2023-27535",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An authentication bypass vulnerability exists in libcurl \u003c8.0.0 in the FTP connection reuse feature that can result in wrong credentials being used during subsequent transfers. Previously created connections are kept in a connection pool for reuse if they match the current setup. However, certain FTP settings such as CURLOPT_FTP_ACCOUNT, CURLOPT_FTP_ALTERNATIVE_TO_USER, CURLOPT_FTP_SSL_CCC, and CURLOPT_USE_SSL were not included in the configuration match checks, causing them to match too easily. This could lead to libcurl using the wrong credentials when performing a transfer, potentially allowing unauthorized access to sensitive information.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-27535"
    },
    {
      "cve": "CVE-2023-27536",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An authentication bypass vulnerability exists libcurl \u003c8.0.0 in the connection reuse feature which can reuse previously established connections with incorrect user permissions due to a failure to check for changes in the CURLOPT_GSSAPI_DELEGATION option. This vulnerability affects krb5/kerberos/negotiate/GSSAPI transfers and could potentially result in unauthorized access to sensitive information. The safest option is to not reuse connections if the CURLOPT_GSSAPI_DELEGATION option has been changed.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-27536"
    },
    {
      "cve": "CVE-2023-27537",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A double free vulnerability exists in libcurl \u003c8.0.0 when sharing HSTS data between separate \"handles\". This sharing was introduced without considerations for do this sharing across separate threads but there was no indication of this fact in the documentation. Due to missing mutexes or thread locks, two threads sharing the same HSTS data could end up doing a double-free or use-after-free.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-27537"
    },
    {
      "cve": "CVE-2023-27538",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl would reuse a previously created connection even when an SSH related option had been changed that should have prohibited reuse. libcurl keeps previously used connections in a connection pool for subsequent transfers to reuse if one of them matches the setup. However, two SSH settings were left out from the configuration match checks, making them match too easily.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-27538"
    },
    {
      "cve": "CVE-2023-28484",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libxml2 before 2.10.4, parsing of certain invalid XSD schemas can lead to a NULL pointer dereference and subsequently a segfault. This occurs in xmlSchemaFixupComplexType in xmlschemas.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-28484"
    },
    {
      "cve": "CVE-2023-28531",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ssh-add in OpenSSH before 9.3 adds smartcard keys to ssh-agent without the intended per-hop destination constraints. The earliest affected version is 8.9.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-28531"
    },
    {
      "cve": "CVE-2023-29383",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Shadow 4.13, it is possible to inject control characters into fields provided to the SUID program chfn (change finger). Although it is not possible to exploit this directly (e.g., adding a new user fails because \\n is in the block list), it is possible to misrepresent the /etc/passwd file when viewed. Use of \\r manipulations and Unicode characters to work around blocking of the : character make it possible to give the impression that a new user has been added. In other words, an adversary may be able to convince a system administrator to take the system offline (an indirect, social-engineered denial of service) by demonstrating that \"cat /etc/passwd\" shows a rogue user account.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-29383"
    },
    {
      "cve": "CVE-2023-29469",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.4. When hashing empty dict strings in a crafted XML document, xmlDictComputeFastKey in dict.c can produce non-deterministic values, leading to various logic and memory errors, such as a double free. This behavior occurs because there is an attempt to use the first byte of an empty string, and any value is possible (not solely the \u0027\\0\u0027 value).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-29469"
    },
    {
      "cve": "CVE-2023-29491",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ncurses before 6.4 20230408, when used by a setuid application, allows local users to trigger security-relevant memory corruption via malformed data in a terminfo database file that is found in $HOME/.terminfo or reached via the TERMINFO or TERM environment variable.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-29491"
    },
    {
      "cve": "CVE-2023-29499",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GLib. GVariant deserialization fails to validate that the input conforms to the expected format, leading to denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-29499"
    },
    {
      "cve": "CVE-2023-31085",
      "cwe": {
        "id": "CWE-369",
        "name": "Divide By Zero"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in drivers/mtd/ubi/cdev.c in the Linux kernel 6.2. There is a divide-by-zero error in do_div(sz,mtd-\u003eerasesize), used indirectly by ctrl_cdev_ioctl, when mtd-\u003eerasesize is 0.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-31085"
    },
    {
      "cve": "CVE-2023-32611",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GLib. GVariant deserialization is vulnerable to a slowdown issue where a crafted GVariant can cause excessive processing, leading to denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-32611"
    },
    {
      "cve": "CVE-2023-32636",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glib, where the gvariant deserialization code is vulnerable to a denial of service introduced by additional input validation added to resolve CVE-2023-29499. The offset table validation may be very slow. This bug does not affect any released version of glib but does affect glib distributors who followed the guidance of glib developers to backport the initial fix for CVE-2023-29499.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-32636"
    },
    {
      "cve": "CVE-2023-32643",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GLib. The GVariant deserialization code is vulnerable to a heap buffer overflow introduced by the fix for CVE-2023-32665. This bug does not affect any released version of GLib, but does affect GLib distributors who followed the guidance of GLib developers to backport the initial fix for CVE-2023-32665.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-32643"
    },
    {
      "cve": "CVE-2023-32665",
      "cwe": {
        "id": "CWE-502",
        "name": "Deserialization of Untrusted Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GLib. GVariant deserialization is vulnerable to an exponential blowup issue where a crafted GVariant can cause excessive processing, leading to denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-32665"
    },
    {
      "cve": "CVE-2023-34319",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The fix for XSA-423 added logic to Linux\u0027es netback driver to deal with\na frontend splitting a packet in a way such that not all of the headers\nwould come in one piece.  Unfortunately the logic introduced there\ndidn\u0027t account for the extreme case of the entire packet being split\ninto as many pieces as permitted by the protocol, yet still being\nsmaller than the area that\u0027s specially dealt with to keep all (possible)\nheaders together.  Such an unusual packet would therefore trigger a\nbuffer overrun in the driver.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-34319"
    },
    {
      "cve": "CVE-2023-34969",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "D-Bus before 1.15.6 sometimes allows unprivileged users to crash dbus-daemon. If a privileged user with control over the dbus-daemon is using the org.freedesktop.DBus.Monitoring interface to monitor message bus traffic, then an unprivileged user with the ability to connect to the same dbus-daemon can cause a dbus-daemon crash under some circumstances via an unreplyable message. When done on the well-known system bus, this is a denial-of-service vulnerability. The fixed versions are 1.12.28, 1.14.8, and 1.15.6.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-34969"
    },
    {
      "cve": "CVE-2023-35001",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Linux Kernel nftables Out-Of-Bounds Read/Write Vulnerability; nft_byteorder poorly handled vm register contents when CAP_NET_ADMIN is in any user or network namespace",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-35001"
    },
    {
      "cve": "CVE-2023-35945",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Envoy is a cloud-native high-performance edge/middle/service proxy. Envoy\u2019s HTTP/2 codec may leak a header map and bookkeeping structures upon receiving `RST_STREAM` immediately followed by the `GOAWAY` frames from an upstream server. In nghttp2, cleanup of pending requests due to receipt of the `GOAWAY` frame skips de-allocation of the bookkeeping structure and pending compressed header. The error return [code path] is taken if connection is already marked for not sending more requests due to `GOAWAY` frame. The clean-up code is right after the return statement, causing memory leak. Denial of service through memory exhaustion. This vulnerability was patched in versions(s) 1.26.3, 1.25.8, 1.24.9, 1.23.11.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-35945"
    },
    {
      "cve": "CVE-2023-38408",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The PKCS#11 feature in ssh-agent in OpenSSH before 9.3p2 has an insufficiently trustworthy search path, leading to remote code execution if an agent is forwarded to an attacker-controlled system. (Code in /usr/lib is not necessarily safe for loading into ssh-agent.) NOTE: this issue exists because of an incomplete fix for CVE-2016-10009.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.7,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:R/S:C/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-38408"
    },
    {
      "cve": "CVE-2023-38545",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This flaw makes curl overflow a heap based buffer in the SOCKS5 proxy handshake.\r\n\r\nWhen curl is asked to pass along the hostname to the SOCKS5 proxy to allow that to resolve the address instead of it getting done by curl itself, the maximum length that hostname can be is 255 bytes.\r\n\r\nIf the hostname is detected to be longer than 255 bytes, curl switches to local name resolving and instead passes on the resolved address only to the proxy. Due to a bug, the local variable that means \"let the host resolve the name\" could get the wrong value during a slow SOCKS5 handshake, and contrary to the intention, copy the too long hostname to the target buffer instead of copying just the resolved address there.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-38545"
    },
    {
      "cve": "CVE-2023-38546",
      "cwe": {
        "id": "CWE-73",
        "name": "External Control of File Name or Path"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This flaw allows an attacker to insert cookies at will into a running program\r\nusing libcurl, if the specific series of conditions are met.\r\n\r\nlibcurl performs transfers. In its API, an application creates \"easy handles\"\r\nthat are the individual handles for single transfers.\r\n\r\nlibcurl provides a function call that duplicates en easy handle called\r\n[curl_easy_duphandle](https://curl.se/libcurl/c/curl_easy_duphandle.html).\r\n\r\nIf a transfer has cookies enabled when the handle is duplicated, the\r\ncookie-enable state is also cloned - but without cloning the actual\r\ncookies. If the source handle did not read any cookies from a specific file on\r\ndisk, the cloned version of the handle would instead store the file name as\r\n`none` (using the four ASCII letters, no quotes).\r\n\r\nSubsequent use of the cloned handle that does not explicitly set a source to\r\nload cookies from would then inadvertently load cookies from a file named\r\n`none` - if such a file exists and is readable in the current directory of the\r\nprogram using libcurl. And if using the correct file format of course.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-38546"
    },
    {
      "cve": "CVE-2023-39128",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU gdb (GDB) 13.0.50.20220805-git was discovered to contain a stack overflow via the function ada_decode at /gdb/ada-lang.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-39128"
    },
    {
      "cve": "CVE-2023-39189",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The nfnl_osf_add_callback function did not validate the user mode controlled opt_num field. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-39189"
    },
    {
      "cve": "CVE-2023-39192",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The xt_u32 module did not validate the fields in the xt_u32 structure. This flaw allows a local privileged attacker to trigger an out-of-bounds read by setting the size fields with a value beyond the array boundaries, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:H/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-39192"
    },
    {
      "cve": "CVE-2023-39193",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The sctp_mt_check did not validate the flag_count field. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-39193"
    },
    {
      "cve": "CVE-2023-39194",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the XFRM subsystem in the Linux kernel. The specific flaw exists within the processing of state filters, which can result in a read past the end of an allocated buffer. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, potentially leading to an information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.2,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:L/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-39194"
    },
    {
      "cve": "CVE-2023-39615",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Xmlsoft Libxml2 v2.11.0 was discovered to contain an out-of-bounds read via the xmlSAX2StartElement() function at /libxml2/SAX2.c. This vulnerability allows attackers to cause a Denial of Service (DoS) via supplying a crafted XML file. NOTE: the vendor\u0027s position is that the product does not support the legacy SAX1 interface with custom callbacks; there is a crash even without crafted input.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-39615"
    },
    {
      "cve": "CVE-2023-40283",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in l2cap_sock_release in net/bluetooth/l2cap_sock.c in the Linux kernel before 6.4.10. There is a use-after-free because the children of an sk are mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-40283"
    },
    {
      "cve": "CVE-2023-42754",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference flaw was found in the Linux kernel ipv4 stack. The socket buffer (skb) was assumed to be associated with a device before calling __ip_options_compile, which is not always the case if the skb is re-routed by ipvs. This issue may allow a local user with CAP_NET_ADMIN privileges to crash the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-42754"
    },
    {
      "cve": "CVE-2023-42755",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the IPv4 Resource Reservation Protocol (RSVP) classifier in the Linux kernel. The xprt pointer may go beyond the linear part of the skb, leading to an out-of-bounds read in the `rsvp_classify` function. This issue may allow a local user to crash the system and cause a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-42755"
    },
    {
      "cve": "CVE-2023-44487",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-44487"
    },
    {
      "cve": "CVE-2023-45322",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 through 2.11.5 has a use-after-free that can only occur after a certain memory allocation fails. This occurs in xmlUnlinkNode in tree.c. NOTE: the vendor\u0027s position is \"I don\u0027t think these issues are critical enough to warrant a CVE ID ... because an attacker typically can\u0027t control when memory allocations fail.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-45322"
    },
    {
      "cve": "CVE-2023-45853",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "MiniZip in zlib through 1.3 has an integer overflow and resultant heap-based buffer overflow in zipOpenNewFileInZip4_64 via a long filename, comment, or extra field. NOTE: MiniZip is not a supported part of the zlib product.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-45853"
    },
    {
      "cve": "CVE-2023-45871",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in drivers/net/ethernet/intel/igb/igb_main.c in the IGB driver in the Linux kernel before 6.5.3. A buffer size may not be adequate for frames larger than the MTU.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-45871"
    },
    {
      "cve": "CVE-2023-45898",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Linux kernel before 6.5.4 has an es1 use-after-free in fs/ext4/extents_status.c, related to ext4_es_insert_extent.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-45898"
    },
    {
      "cve": "CVE-2023-45918",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ncurses 6.4-20230610 has a NULL pointer dereference in tgetstr in tinfo/lib_termcap.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-45918"
    },
    {
      "cve": "CVE-2023-46218",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This flaw allows a malicious HTTP server to set \"super cookies\" in curl that are then passed back to more origins than what is otherwise allowed or possible. This allows a site to set cookies that then would get sent to different and unrelated sites and domains. It could do this by exploiting a mixed case flaw in curl\u0027s function that verifies a given cookie domain against the Public Suffix List (PSL). For example a cookie could be set with `domain=co.UK` when the URL used a lower case hostname `curl.co.uk`, even though `co.uk` is listed as a PSL domain.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-46218"
    },
    {
      "cve": "CVE-2023-46219",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When saving HSTS data to an excessively long file name, curl could end up removing all contents, making subsequent requests using that file unaware of the HSTS status they should otherwise use.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-46219"
    },
    {
      "cve": "CVE-2023-46862",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 6.5.9. During a race with SQ thread exit, an io_uring/fdinfo.c io_uring_show_fdinfo NULL pointer dereference can occur.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-46862"
    },
    {
      "cve": "CVE-2023-48795",
      "cwe": {
        "id": "CWE-222",
        "name": "Truncation of Security-relevant Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The SSH transport protocol with certain OpenSSH extensions, found in OpenSSH before 9.6 and other products, allows remote attackers to bypass integrity checks such that some packets are omitted (from the extension negotiation message), and a client and server may consequently end up with a connection for which some security features have been downgraded or disabled, aka a Terrapin attack. This occurs because the SSH Binary Packet Protocol (BPP), implemented by these extensions, mishandles the handshake phase and mishandles use of sequence numbers. For example, there is an effective attack against SSH\u0027s use of ChaCha20-Poly1305 (and CBC with Encrypt-then-MAC). The bypass occurs in chacha20-poly1305@openssh.com and (if CBC is used) the -etm@openssh.com MAC algorithms. This also affects Maverick Synergy Java SSH API before 3.1.0-SNAPSHOT, Dropbear through 2022.83, Ssh before 5.1.1 in Erlang/OTP, PuTTY before 0.80, AsyncSSH before 2.14.2, golang.org/x/crypto before 0.17.0, libssh before 0.10.6, libssh2 through 1.11.0, Thorn Tech SFTP Gateway before 3.4.6, Tera Term before 5.1, Paramiko before 3.4.0, jsch before 0.2.15, SFTPGo before 2.5.6, Netgate pfSense Plus through 23.09.1, Netgate pfSense CE through 2.7.2, HPN-SSH through 18.2.0, ProFTPD before 1.3.8b (and before1.3.9rc2), ORYX CycloneSSH before 2.3.4, NetSarang XShell 7 before Build 0144, CrushFTP before 10.6.0, ConnectBot SSH library before 2.2.22, Apache MINA sshd through 2.11.0, sshj through 0.37.0, TinySSH through 20230101, trilead-ssh2 6401, the net-ssh gem 7.2.0 for Ruby, the mscdex ssh2 module before 1.15.0 for Node.js, the thrussh library before 0.35.1 for Rust, and the Russh crate before 0.40.2 for Rust; and there could be effects on Bitvise SSH through 9.31.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-48795"
    },
    {
      "cve": "CVE-2023-52425",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libexpat through 2.5.0 allows a denial of service (resource consumption) because many full reparsings are required in the case of a large token for which multiple buffer fills are needed.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-52425"
    },
    {
      "cve": "CVE-2023-52426",
      "cwe": {
        "id": "CWE-776",
        "name": "Improper Restriction of Recursive Entity References in DTDs (\u0027XML Entity Expansion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libexpat through 2.5.0 allows recursive XML Entity Expansion if XML_DTD is undefined at compile time.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-52426"
    },
    {
      "cve": "CVE-2024-0584",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free issue was found in igmp_start_timer in net/ipv4/igmp.c in the network sub-component in the Linux Kernel. This flaw allows a local user to observe a refcnt use-after-free issue when receiving an igmp query packet, leading to a kernel information leak.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-0584"
    },
    {
      "cve": "CVE-2024-2004",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When a protocol selection parameter option disables all protocols without adding any then the default set of protocols would remain in the allowed set due to an error in the logic for removing protocols. The below command would perform a request to curl.se with a plaintext protocol which has been explicitly disabled.      curl --proto -all,-http http://curl.se  The flaw is only present if the set of selected protocols disables the entire set of available protocols, in itself a command with no practical use and therefore unlikely to be encountered in real situations. The curl security team has thus assessed this to be low severity bug.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-2004"
    },
    {
      "cve": "CVE-2024-2379",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl skips the certificate verification for a QUIC connection under certain conditions, when built to use wolfSSL. If told to use an unknown/bad cipher or curve, the error path accidentally skips the verification and returns OK, thus ignoring any certificate problems.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-2379"
    },
    {
      "cve": "CVE-2024-2398",
      "cwe": {
        "id": "CWE-772",
        "name": "Missing Release of Resource after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When an application tells libcurl it wants to allow HTTP/2 server push, and the amount of received headers for the push surpasses the maximum allowed limit (1000), libcurl aborts the server push. When aborting, libcurl inadvertently does not free all the previously allocated headers and instead leaks the memory.  Further, this error condition fails silently and is therefore not easily detected by an application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-2398"
    },
    {
      "cve": "CVE-2024-2466",
      "cwe": {
        "id": "CWE-297",
        "name": "Improper Validation of Certificate with Host Mismatch"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl did not check the server certificate of TLS connections done to a host specified as an IP address, when built to use mbedTLS.  libcurl would wrongly avoid using the set hostname function when the specified hostname was given as an IP address, therefore completely skipping the certificate check. This affects all uses of TLS protocols (HTTPS, FTPS, IMAPS, POPS3, SMTPS, etc).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-2466"
    },
    {
      "cve": "CVE-2024-2511",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Some non-default TLS server configurations can cause unbounded memory growth when processing TLSv1.3 sessions\r\nImpact summary: An attacker may exploit certain server configurations to trigger unbounded memory growth that would lead to a Denial of Service This problem can occur in TLSv1.3 if the non-default SSL_OP_NO_TICKET option is being used (but not if early_data support is also configured and the default anti-replay protection is in use). In this case, under certain conditions, the session cache can get into an incorrect state and it will fail to flush properly as it fills. The session cache will continue to grow in an unbounded manner. A malicious client could deliberately create the scenario for this failure to force a Denial of Service. It may also happen by accident in normal operation. This issue only affects TLS servers supporting TLSv1.3. It does not affect TLS clients. The FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue. OpenSSL 1.0.2 is also not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-2511"
    },
    {
      "cve": "CVE-2024-2961",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv() function in the GNU C Library versions 2.39 and older may overflow the output buffer passed to it by up to 4 bytes when converting strings to the ISO-2022-CN-EXT character set, which may be used to crash an application or overwrite a neighbouring variable.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-2961"
    },
    {
      "cve": "CVE-2024-28085",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "wall in util-linux through 2.40, often installed with setgid tty permissions, allows escape sequences to be sent to other users\u0027 terminals through argv. (Specifically, escape sequences received from stdin are blocked, but escape sequences received from argv are not blocked.) There may be plausible scenarios where this leads to account takeover.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.0"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-28085"
    },
    {
      "cve": "CVE-2024-28182",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nghttp2 is an implementation of the Hypertext Transfer Protocol version 2 in C. The nghttp2 library prior to version 1.61.0 keeps reading the unbounded number of HTTP/2 CONTINUATION frames even after a stream is reset to keep HPACK context in sync.  This causes excessive CPU usage to decode HPACK stream. nghttp2 v1.61.0 mitigates this vulnerability by limiting the number of CONTINUATION frames it accepts per stream. There is no workaround for this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-28182"
    },
    {
      "cve": "CVE-2024-28757",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libexpat through 2.6.1 allows an XML Entity Expansion attack when there is isolated use of external parsers (created via XML_ExternalEntityParserCreate).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-28757"
    },
    {
      "cve": "CVE-2024-28834",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GnuTLS. The Minerva attack is a cryptographic vulnerability that exploits deterministic behavior in systems like GnuTLS, leading to side-channel leaks. In specific scenarios, such as when using the GNUTLS_PRIVKEY_FLAG_REPRODUCIBLE flag, it can result in a noticeable step in nonce size from 513 to 512 bits, exposing a potential timing side-channel.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-28834"
    },
    {
      "cve": "CVE-2024-28835",
      "cwe": {
        "id": "CWE-248",
        "name": "Uncaught Exception"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw has been discovered in GnuTLS where an application crash can be induced when attempting to verify a specially crafted .pem bundle using the \"certtool --verify-chain\" command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.0,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-28835"
    },
    {
      "cve": "CVE-2024-33599",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nscd: Stack-based buffer overflow in netgroup cache\r\n\r\nIf the Name Service Cache Daemon\u0027s (nscd) fixed size cache is exhausted\r\nby client requests then a subsequent client request for netgroup data\r\nmay result in a stack-based buffer overflow.  This flaw was introduced\r\nin glibc 2.15 when the cache was added to nscd.\r\n\r\nThis vulnerability is only present in the nscd binary.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-33599"
    },
    {
      "cve": "CVE-2024-33600",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nscd: Null pointer crashes after notfound response\r\n\r\nIf the Name Service Cache Daemon\u0027s (nscd) cache fails to add a not-found\r\nnetgroup response to the cache, the client request can result in a null\r\npointer dereference.  This flaw was introduced in glibc 2.15 when the\r\ncache was added to nscd.\r\n\r\nThis vulnerability is only present in the nscd binary.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-33600"
    },
    {
      "cve": "CVE-2024-33601",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nscd: netgroup cache may terminate daemon on memory allocation failure\r\n\r\nThe Name Service Cache Daemon\u0027s (nscd) netgroup cache uses xmalloc or\r\nxrealloc and these functions may terminate the process due to a memory\r\nallocation failure resulting in a denial of service to the clients.  The\r\nflaw was introduced in glibc 2.15 when the cache was added to nscd.\r\n\r\nThis vulnerability is only present in the nscd binary.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.0,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-33601"
    },
    {
      "cve": "CVE-2024-33602",
      "cwe": {
        "id": "CWE-466",
        "name": "Return of Pointer Value Outside of Expected Range"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nscd: netgroup cache assumes NSS callback uses in-buffer strings\r\n\r\nThe Name Service Cache Daemon\u0027s (nscd) netgroup cache can corrupt memory\r\nwhen the NSS callback does not store all strings in the provided buffer.\r\nThe flaw was introduced in glibc 2.15 when the cache was added to nscd.\r\n\r\nThis vulnerability is only present in the nscd binary.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.0,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-33602"
    },
    {
      "cve": "CVE-2024-34459",
      "cwe": {
        "id": "CWE-126",
        "name": "Buffer Over-read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in xmllint (from libxml2) before 2.11.8 and 2.12.x before 2.12.7. Formatting error messages with xmllint --htmlout can result in a buffer over-read in xmlHTMLPrintFileContext in xmllint.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-34459"
    }
  ]
}

{
  "@context": {
    "@vocab": "https://www.variotdbs.pl/ref/VARIoTentry#",
    "affected_products": {
      "@id": "https://www.variotdbs.pl/ref/affected_products"
    },
    "configurations": {
      "@id": "https://www.variotdbs.pl/ref/configurations"
    },
    "credits": {
      "@id": "https://www.variotdbs.pl/ref/credits"
    },
    "cvss": {
      "@id": "https://www.variotdbs.pl/ref/cvss/"
    },
    "description": {
      "@id": "https://www.variotdbs.pl/ref/description/"
    },
    "exploit_availability": {
      "@id": "https://www.variotdbs.pl/ref/exploit_availability/"
    },
    "external_ids": {
      "@id": "https://www.variotdbs.pl/ref/external_ids/"
    },
    "iot": {
      "@id": "https://www.variotdbs.pl/ref/iot/"
    },
    "iot_taxonomy": {
      "@id": "https://www.variotdbs.pl/ref/iot_taxonomy/"
    },
    "patch": {
      "@id": "https://www.variotdbs.pl/ref/patch/"
    },
    "problemtype_data": {
      "@id": "https://www.variotdbs.pl/ref/problemtype_data/"
    },
    "references": {
      "@id": "https://www.variotdbs.pl/ref/references/"
    },
    "sources": {
      "@id": "https://www.variotdbs.pl/ref/sources/"
    },
    "sources_release_date": {
      "@id": "https://www.variotdbs.pl/ref/sources_release_date/"
    },
    "sources_update_date": {
      "@id": "https://www.variotdbs.pl/ref/sources_update_date/"
    },
    "threat_type": {
      "@id": "https://www.variotdbs.pl/ref/threat_type/"
    },
    "title": {
      "@id": "https://www.variotdbs.pl/ref/title/"
    },
    "type": {
      "@id": "https://www.variotdbs.pl/ref/type/"
    }
  },
  "@id": "https://www.variotdbs.pl/vuln/VAR-202001-1866",
  "affected_products": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/affected_products#",
      "data": {
        "@container": "@list"
      },
      "sources": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/sources#"
        },
        "@id": "https://www.variotdbs.pl/ref/sources"
      }
    },
    "data": [
      {
        "model": "libxml2",
        "scope": "eq",
        "trust": 1.8,
        "vendor": "xmlsoft",
        "version": "2.9.10"
      },
      {
        "model": "clustered data ontap",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "netapp",
        "version": null
      },
      {
        "model": "h700s",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "netapp",
        "version": null
      },
      {
        "model": "communications cloud native core network function cloud native environment",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "oracle",
        "version": "1.10.0"
      },
      {
        "model": "h700e",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "netapp",
        "version": null
      },
      {
        "model": "h500e",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "netapp",
        "version": null
      },
      {
        "model": "real user experience insight",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "oracle",
        "version": "13.3.1.0"
      },
      {
        "model": "h300e",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "netapp",
        "version": null
      },
      {
        "model": "linux",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "debian",
        "version": "9.0"
      },
      {
        "model": "steelstore cloud integrated storage",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "netapp",
        "version": null
      },
      {
        "model": "fedora",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "fedoraproject",
        "version": "32"
      },
      {
        "model": "snapdrive",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "netapp",
        "version": null
      },
      {
        "model": "symantec netbackup",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "netapp",
        "version": null
      },
      {
        "model": "ubuntu linux",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "canonical",
        "version": "16.04"
      },
      {
        "model": "fedora",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "fedoraproject",
        "version": "30"
      },
      {
        "model": "mysql workbench",
        "scope": "lte",
        "trust": 1.0,
        "vendor": "oracle",
        "version": "8.0.26"
      },
      {
        "model": "smi-s provider",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "netapp",
        "version": null
      },
      {
        "model": "h300s",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "netapp",
        "version": null
      },
      {
        "model": "sinema remote connect server",
        "scope": "lt",
        "trust": 1.0,
        "vendor": "siemens",
        "version": "3.0"
      },
      {
        "model": "ubuntu linux",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "canonical",
        "version": "12.04"
      },
      {
        "model": "ubuntu linux",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "canonical",
        "version": "18.04"
      },
      {
        "model": "enterprise manager base platform",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "oracle",
        "version": "13.5.0.0"
      },
      {
        "model": "enterprise manager ops center",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "oracle",
        "version": "12.4.0.0"
      },
      {
        "model": "real user experience insight",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "oracle",
        "version": "13.4.1.0"
      },
      {
        "model": "fedora",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "fedoraproject",
        "version": "31"
      },
      {
        "model": "h410s",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "netapp",
        "version": null
      },
      {
        "model": "ubuntu linux",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "canonical",
        "version": "19.10"
      },
      {
        "model": "real user experience insight",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "oracle",
        "version": "13.5.1.0"
      },
      {
        "model": "h500s",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "netapp",
        "version": null
      },
      {
        "model": "ubuntu linux",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "canonical",
        "version": "14.04"
      },
      {
        "model": "enterprise manager base platform",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "oracle",
        "version": "13.4.0.0"
      },
      {
        "model": "h410c",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "netapp",
        "version": null
      },
      {
        "model": "peoplesoft enterprise peopletools",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "oracle",
        "version": "8.58"
      },
      {
        "model": "libxml2",
        "scope": "eq",
        "trust": 0.8,
        "vendor": "xmlsoft",
        "version": null
      }
    ],
    "sources": [
      {
        "db": "JVNDB",
        "id": "JVNDB-2020-001451"
      },
      {
        "db": "NVD",
        "id": "CVE-2020-7595"
      }
    ]
  },
  "configurations": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/configurations#",
      "children": {
        "@container": "@list"
      },
      "cpe_match": {
        "@container": "@list"
      },
      "data": {
        "@container": "@list"
      },
      "nodes": {
        "@container": "@list"
      }
    },
    "data": [
      {
        "CVE_data_version": "4.0",
        "nodes": [
          {
            "children": [],
            "cpe_match": [
              {
                "cpe23Uri": "cpe:2.3:a:xmlsoft:libxml2:2.9.10:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              }
            ],
            "operator": "OR"
          },
          {
            "children": [],
            "cpe_match": [
              {
                "cpe23Uri": "cpe:2.3:o:fedoraproject:fedora:30:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:fedoraproject:fedora:31:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:fedoraproject:fedora:32:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              }
            ],
            "operator": "OR"
          },
          {
            "children": [],
            "cpe_match": [
              {
                "cpe23Uri": "cpe:2.3:o:canonical:ubuntu_linux:16.04:*:*:*:lts:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:canonical:ubuntu_linux:18.04:*:*:*:lts:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:canonical:ubuntu_linux:14.04:*:*:*:esm:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:canonical:ubuntu_linux:19.10:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:canonical:ubuntu_linux:12.04:*:*:*:-:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              }
            ],
            "operator": "OR"
          },
          {
            "children": [],
            "cpe_match": [
              {
                "cpe23Uri": "cpe:2.3:o:debian:debian_linux:9.0:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              }
            ],
            "operator": "OR"
          },
          {
            "children": [],
            "cpe_match": [
              {
                "cpe23Uri": "cpe:2.3:a:siemens:sinema_remote_connect_server:*:*:*:*:*:*:*:*",
                "cpe_name": [],
                "versionEndExcluding": "3.0",
                "vulnerable": true
              }
            ],
            "operator": "OR"
          },
          {
            "children": [],
            "cpe_match": [
              {
                "cpe23Uri": "cpe:2.3:a:netapp:steelstore_cloud_integrated_storage:-:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:a:netapp:clustered_data_ontap:-:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:a:netapp:smi-s_provider:-:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:a:netapp:snapdrive:-:*:*:*:*:windows:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:a:netapp:symantec_netbackup:-:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              }
            ],
            "operator": "OR"
          },
          {
            "children": [
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:o:netapp:h300s_firmware:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": true
                  }
                ],
                "operator": "OR"
              },
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:h:netapp:h300s:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": false
                  }
                ],
                "operator": "OR"
              }
            ],
            "cpe_match": [],
            "operator": "AND"
          },
          {
            "children": [
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:o:netapp:h500s_firmware:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": true
                  }
                ],
                "operator": "OR"
              },
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:h:netapp:h500s:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": false
                  }
                ],
                "operator": "OR"
              }
            ],
            "cpe_match": [],
            "operator": "AND"
          },
          {
            "children": [
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:o:netapp:h700s_firmware:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": true
                  }
                ],
                "operator": "OR"
              },
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:h:netapp:h700s:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": false
                  }
                ],
                "operator": "OR"
              }
            ],
            "cpe_match": [],
            "operator": "AND"
          },
          {
            "children": [
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:o:netapp:h300e_firmware:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": true
                  }
                ],
                "operator": "OR"
              },
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:h:netapp:h300e:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": false
                  }
                ],
                "operator": "OR"
              }
            ],
            "cpe_match": [],
            "operator": "AND"
          },
          {
            "children": [
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:o:netapp:h500e_firmware:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": true
                  }
                ],
                "operator": "OR"
              },
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:h:netapp:h500e:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": false
                  }
                ],
                "operator": "OR"
              }
            ],
            "cpe_match": [],
            "operator": "AND"
          },
          {
            "children": [
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:o:netapp:h700e_firmware:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": true
                  }
                ],
                "operator": "OR"
              },
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:h:netapp:h700e:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": false
                  }
                ],
                "operator": "OR"
              }
            ],
            "cpe_match": [],
            "operator": "AND"
          },
          {
            "children": [
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:o:netapp:h410s_firmware:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": true
                  }
                ],
                "operator": "OR"
              },
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:h:netapp:h410s:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": false
                  }
                ],
                "operator": "OR"
              }
            ],
            "cpe_match": [],
            "operator": "AND"
          },
          {
            "children": [
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:o:netapp:h410c_firmware:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": true
                  }
                ],
                "operator": "OR"
              },
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:h:netapp:h410c:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": false
                  }
                ],
                "operator": "OR"
              }
            ],
            "cpe_match": [],
            "operator": "AND"
          },
          {
            "children": [],
            "cpe_match": [
              {
                "cpe23Uri": "cpe:2.3:a:oracle:real_user_experience_insight:13.3.1.0:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              }
            ],
            "operator": "OR"
          },
          {
            "children": [],
            "cpe_match": [
              {
                "cpe23Uri": "cpe:2.3:a:oracle:peoplesoft_enterprise_peopletools:8.58:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:a:oracle:enterprise_manager_base_platform:13.4.0.0:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:a:oracle:enterprise_manager_ops_center:12.4.0.0:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:a:oracle:enterprise_manager_base_platform:13.5.0.0:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:a:oracle:mysql_workbench:*:*:*:*:*:*:*:*",
                "cpe_name": [],
                "versionEndIncluding": "8.0.26",
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:a:oracle:real_user_experience_insight:13.4.1.0:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:a:oracle:real_user_experience_insight:13.5.1.0:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:a:oracle:communications_cloud_native_core_network_function_cloud_native_environment:1.10.0:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              }
            ],
            "operator": "OR"
          }
        ]
      }
    ],
    "sources": [
      {
        "db": "NVD",
        "id": "CVE-2020-7595"
      }
    ]
  },
  "credits": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/credits#",
      "sources": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/sources#"
        }
      }
    },
    "data": "Red Hat",
    "sources": [
      {
        "db": "PACKETSTORM",
        "id": "160624"
      },
      {
        "db": "PACKETSTORM",
        "id": "160889"
      },
      {
        "db": "PACKETSTORM",
        "id": "160125"
      },
      {
        "db": "PACKETSTORM",
        "id": "159661"
      },
      {
        "db": "PACKETSTORM",
        "id": "161546"
      },
      {
        "db": "PACKETSTORM",
        "id": "161548"
      },
      {
        "db": "PACKETSTORM",
        "id": "161916"
      },
      {
        "db": "PACKETSTORM",
        "id": "160961"
      },
      {
        "db": "CNNVD",
        "id": "CNNVD-202001-965"
      }
    ],
    "trust": 1.4
  },
  "cve": "CVE-2020-7595",
  "cvss": {
    "@context": {
      "cvssV2": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/cvss/cvssV2#"
        },
        "@id": "https://www.variotdbs.pl/ref/cvss/cvssV2"
      },
      "cvssV3": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/cvss/cvssV3#"
        },
        "@id": "https://www.variotdbs.pl/ref/cvss/cvssV3/"
      },
      "severity": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/cvss/severity#"
        },
        "@id": "https://www.variotdbs.pl/ref/cvss/severity"
      },
      "sources": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/sources#"
        },
        "@id": "https://www.variotdbs.pl/ref/sources"
      }
    },
    "data": [
      {
        "cvssV2": [
          {
            "acInsufInfo": false,
            "accessComplexity": "LOW",
            "accessVector": "NETWORK",
            "authentication": "NONE",
            "author": "NVD",
            "availabilityImpact": "PARTIAL",
            "baseScore": 5.0,
            "confidentialityImpact": "NONE",
            "exploitabilityScore": 10.0,
            "impactScore": 2.9,
            "integrityImpact": "NONE",
            "obtainAllPrivilege": false,
            "obtainOtherPrivilege": false,
            "obtainUserPrivilege": false,
            "severity": "MEDIUM",
            "trust": 1.0,
            "userInteractionRequired": false,
            "vectorString": "AV:N/AC:L/Au:N/C:N/I:N/A:P",
            "version": "2.0"
          },
          {
            "acInsufInfo": null,
            "accessComplexity": "Low",
            "accessVector": "Network",
            "authentication": "None",
            "author": "NVD",
            "availabilityImpact": "Partial",
            "baseScore": 5.0,
            "confidentialityImpact": "None",
            "exploitabilityScore": null,
            "id": "CVE-2020-7595",
            "impactScore": null,
            "integrityImpact": "None",
            "obtainAllPrivilege": null,
            "obtainOtherPrivilege": null,
            "obtainUserPrivilege": null,
            "severity": "Medium",
            "trust": 0.9,
            "userInteractionRequired": null,
            "vectorString": "AV:N/AC:L/Au:N/C:N/I:N/A:P",
            "version": "2.0"
          },
          {
            "accessComplexity": "LOW",
            "accessVector": "NETWORK",
            "authentication": "NONE",
            "author": "VULHUB",
            "availabilityImpact": "PARTIAL",
            "baseScore": 5.0,
            "confidentialityImpact": "NONE",
            "exploitabilityScore": 10.0,
            "id": "VHN-185720",
            "impactScore": 2.9,
            "integrityImpact": "NONE",
            "severity": "MEDIUM",
            "trust": 0.1,
            "vectorString": "AV:N/AC:L/AU:N/C:N/I:N/A:P",
            "version": "2.0"
          }
        ],
        "cvssV3": [
          {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "author": "NVD",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "exploitabilityScore": 3.9,
            "impactScore": 3.6,
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "trust": 1.0,
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          {
            "attackComplexity": "Low",
            "attackVector": "Network",
            "author": "NVD",
            "availabilityImpact": "High",
            "baseScore": 7.5,
            "baseSeverity": "High",
            "confidentialityImpact": "None",
            "exploitabilityScore": null,
            "id": "CVE-2020-7595",
            "impactScore": null,
            "integrityImpact": "None",
            "privilegesRequired": "None",
            "scope": "Unchanged",
            "trust": 0.8,
            "userInteraction": "None",
            "vectorString": "CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.0"
          }
        ],
        "severity": [
          {
            "author": "NVD",
            "id": "CVE-2020-7595",
            "trust": 1.8,
            "value": "HIGH"
          },
          {
            "author": "CNNVD",
            "id": "CNNVD-202001-965",
            "trust": 0.6,
            "value": "HIGH"
          },
          {
            "author": "VULHUB",
            "id": "VHN-185720",
            "trust": 0.1,
            "value": "MEDIUM"
          },
          {
            "author": "VULMON",
            "id": "CVE-2020-7595",
            "trust": 0.1,
            "value": "MEDIUM"
          }
        ]
      }
    ],
    "sources": [
      {
        "db": "VULHUB",
        "id": "VHN-185720"
      },
      {
        "db": "VULMON",
        "id": "CVE-2020-7595"
      },
      {
        "db": "JVNDB",
        "id": "JVNDB-2020-001451"
      },
      {
        "db": "CNNVD",
        "id": "CNNVD-202001-965"
      },
      {
        "db": "NVD",
        "id": "CVE-2020-7595"
      }
    ]
  },
  "description": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/description#",
      "sources": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/sources#"
        }
      }
    },
    "data": "xmlStringLenDecodeEntities in parser.c in libxml2 2.9.10 has an infinite loop in a certain end-of-file situation. libxml2 is a function library written in C language for parsing XML documents. There is a security vulnerability in the xmlStringLenDecodeEntities of the parser.c file in libxml2 version 2.9.10. It exists that libxml2 incorrectly handled certain XML files. \n(CVE-2019-19956, CVE-2020-7595). In addition to persistent storage, Red Hat\nOpenShift Container Storage provisions a multicloud data management service\nwith an S3 compatible API. \n\nThese updated images include numerous security fixes, bug fixes, and\nenhancements. Solution:\n\nBefore applying this update, make sure all previously released errata\nrelevant to your system have been applied. \n\nFor details on how to apply this update, refer to:\n\nhttps://access.redhat.com/articles/11258\n\n4. Bugs fixed (https://bugzilla.redhat.com/):\n\n1806266 - Require an extension to the cephfs subvolume commands, that can return metadata regarding a subvolume\n1813506 - Dockerfile not  compatible with docker and buildah\n1817438 - OSDs not distributed uniformly across OCS nodes on a 9-node AWS IPI setup\n1817850 - [BAREMETAL] rook-ceph-operator does not reconcile when osd deployment is deleted when performed node replacement\n1827157 - OSD hitting default CPU limit on AWS i3en.2xlarge instances limiting performance\n1829055 - [RFE] add insecureEdgeTerminationPolicy: Redirect to noobaa mgmt route (http to https)\n1833153 - add a variable for sleep time of rook operator between checks of downed OSD+Node. \n1836299 - NooBaa Operator deploys with HPA that fires maxreplicas alerts by default\n1842254 - [NooBaa] Compression stats do not add up when compression id disabled\n1845976 - OCS 4.5 Independent mode: must-gather commands fails to collect ceph command outputs from external cluster\n1849771 - [RFE] Account created by OBC should have same permissions as bucket owner\n1853652 - CVE-2020-14040 golang.org/x/text: possibility to trigger an infinite loop in encoding/unicode could lead to crash\n1854500 - [tracker-rhcs bug 1838931] mgr/volumes: add command to return metadata of a subvolume snapshot\n1854501 - [Tracker-rhcs bug 1848494 ]pybind/mgr/volumes: Add the ability to keep snapshots of subvolumes independent of the source subvolume\n1854503 - [tracker-rhcs-bug 1848503] cephfs: Provide alternatives to increase the total cephfs subvolume snapshot counts to greater than the current 400 across a Cephfs volume\n1856953 - CVE-2020-15586 golang: data race in certain net/http servers including ReverseProxy can lead to DoS\n1858195 - [GSS] registry pod stuck in ContainerCreating due to pvc from cephfs storage class fail to mount\n1859183 - PV expansion is failing in retry loop in pre-existing PV after upgrade to OCS 4.5 (i.e. if the PV spec does not contain expansion params)\n1859229 - Rook should delete extra MON PVCs in case first reconcile takes too long and rook skips \"b\" and \"c\" (spawned from Bug 1840084#c14)\n1859478 - OCS 4.6 : Upon deployment, CSI Pods in CLBO with error - flag provided but not defined: -metadatastorage\n1860022 - OCS 4.6 Deployment: LBP CSV and pod should not be deployed since ob/obc CRDs are owned from OCS 4.5 onwards\n1860034 - OCS 4.6 Deployment in ocs-ci : Toolbox pod in ContainerCreationError due to key admin-secret not found\n1860670 - OCS 4.5 Uninstall External: Openshift-storage namespace in Terminating state as CephObjectStoreUser had finalizers remaining\n1860848 - Add validation for rgw-pool-prefix in the ceph-external-cluster-details-exporter script\n1861780 - [Tracker BZ1866386][IBM s390x] Mount Failed for CEPH  while running couple of OCS test cases. Solution:\n\nDownload the release images via:\n\nquay.io/redhat/quay:v3.3.3\nquay.io/redhat/clair-jwt:v3.3.3\nquay.io/redhat/quay-builder:v3.3.3\nquay.io/redhat/clair:v3.3.3\n\n4. Bugs fixed (https://bugzilla.redhat.com/):\n\n1905758 - CVE-2020-27831 quay: email notifications authorization bypass\n1905784 - CVE-2020-27832 quay: persistent XSS in repository notification display\n\n5. JIRA issues fixed (https://issues.jboss.org/):\n\nPROJQUAY-1124 - NVD feed is broken for latest Clair v2 version\n\n6. Bugs fixed (https://bugzilla.redhat.com/):\n\n1804533 - CVE-2020-9283 golang.org/x/crypto: Processing of crafted ssh-ed25519 public keys allows for panic\n1836815 - Gather image registry config (backport to 4.3)\n1849176 - Builds fail after running postCommit script if OCP cluster is configured with a container registry whitelist\n1874018 - Limit the size of gathered federated metrics from alerts in Insights Operator\n1874399 - [DR] etcd-member-recover.sh fails to pull image with unauthorized\n1879110 - [4.3] Storage operator stops reconciling when going Upgradeable=False on v1alpha1 CRDs\n\n5. -----BEGIN PGP SIGNED MESSAGE-----\nHash: SHA256\n\n=====================================================================\n                   Red Hat Security Advisory\n\nSynopsis:          Moderate: OpenShift Container Platform 4.7.0 security, bug fix, and enhancement update\nAdvisory ID:       RHSA-2020:5633-01\nProduct:           Red Hat OpenShift Enterprise\nAdvisory URL:      https://access.redhat.com/errata/RHSA-2020:5633\nIssue date:        2021-02-24\nCVE Names:         CVE-2018-10103 CVE-2018-10105 CVE-2018-14461 \n                   CVE-2018-14462 CVE-2018-14463 CVE-2018-14464 \n                   CVE-2018-14465 CVE-2018-14466 CVE-2018-14467 \n                   CVE-2018-14468 CVE-2018-14469 CVE-2018-14470 \n                   CVE-2018-14553 CVE-2018-14879 CVE-2018-14880 \n                   CVE-2018-14881 CVE-2018-14882 CVE-2018-16227 \n                   CVE-2018-16228 CVE-2018-16229 CVE-2018-16230 \n                   CVE-2018-16300 CVE-2018-16451 CVE-2018-16452 \n                   CVE-2018-20843 CVE-2019-3884 CVE-2019-5018 \n                   CVE-2019-6977 CVE-2019-6978 CVE-2019-8625 \n                   CVE-2019-8710 CVE-2019-8720 CVE-2019-8743 \n                   CVE-2019-8764 CVE-2019-8766 CVE-2019-8769 \n                   CVE-2019-8771 CVE-2019-8782 CVE-2019-8783 \n                   CVE-2019-8808 CVE-2019-8811 CVE-2019-8812 \n                   CVE-2019-8813 CVE-2019-8814 CVE-2019-8815 \n                   CVE-2019-8816 CVE-2019-8819 CVE-2019-8820 \n                   CVE-2019-8823 CVE-2019-8835 CVE-2019-8844 \n                   CVE-2019-8846 CVE-2019-9455 CVE-2019-9458 \n                   CVE-2019-11068 CVE-2019-12614 CVE-2019-13050 \n                   CVE-2019-13225 CVE-2019-13627 CVE-2019-14889 \n                   CVE-2019-15165 CVE-2019-15166 CVE-2019-15903 \n                   CVE-2019-15917 CVE-2019-15925 CVE-2019-16167 \n                   CVE-2019-16168 CVE-2019-16231 CVE-2019-16233 \n                   CVE-2019-16935 CVE-2019-17450 CVE-2019-17546 \n                   CVE-2019-18197 CVE-2019-18808 CVE-2019-18809 \n                   CVE-2019-19046 CVE-2019-19056 CVE-2019-19062 \n                   CVE-2019-19063 CVE-2019-19068 CVE-2019-19072 \n                   CVE-2019-19221 CVE-2019-19319 CVE-2019-19332 \n                   CVE-2019-19447 CVE-2019-19524 CVE-2019-19533 \n                   CVE-2019-19537 CVE-2019-19543 CVE-2019-19602 \n                   CVE-2019-19767 CVE-2019-19770 CVE-2019-19906 \n                   CVE-2019-19956 CVE-2019-20054 CVE-2019-20218 \n                   CVE-2019-20386 CVE-2019-20387 CVE-2019-20388 \n                   CVE-2019-20454 CVE-2019-20636 CVE-2019-20807 \n                   CVE-2019-20812 CVE-2019-20907 CVE-2019-20916 \n                   CVE-2020-0305 CVE-2020-0444 CVE-2020-1716 \n                   CVE-2020-1730 CVE-2020-1751 CVE-2020-1752 \n                   CVE-2020-1971 CVE-2020-2574 CVE-2020-2752 \n                   CVE-2020-2922 CVE-2020-3862 CVE-2020-3864 \n                   CVE-2020-3865 CVE-2020-3867 CVE-2020-3868 \n                   CVE-2020-3885 CVE-2020-3894 CVE-2020-3895 \n                   CVE-2020-3897 CVE-2020-3898 CVE-2020-3899 \n                   CVE-2020-3900 CVE-2020-3901 CVE-2020-3902 \n                   CVE-2020-6405 CVE-2020-7595 CVE-2020-7774 \n                   CVE-2020-8177 CVE-2020-8492 CVE-2020-8563 \n                   CVE-2020-8566 CVE-2020-8619 CVE-2020-8622 \n                   CVE-2020-8623 CVE-2020-8624 CVE-2020-8647 \n                   CVE-2020-8648 CVE-2020-8649 CVE-2020-9327 \n                   CVE-2020-9802 CVE-2020-9803 CVE-2020-9805 \n                   CVE-2020-9806 CVE-2020-9807 CVE-2020-9843 \n                   CVE-2020-9850 CVE-2020-9862 CVE-2020-9893 \n                   CVE-2020-9894 CVE-2020-9895 CVE-2020-9915 \n                   CVE-2020-9925 CVE-2020-10018 CVE-2020-10029 \n                   CVE-2020-10732 CVE-2020-10749 CVE-2020-10751 \n                   CVE-2020-10763 CVE-2020-10773 CVE-2020-10774 \n                   CVE-2020-10942 CVE-2020-11565 CVE-2020-11668 \n                   CVE-2020-11793 CVE-2020-12465 CVE-2020-12655 \n                   CVE-2020-12659 CVE-2020-12770 CVE-2020-12826 \n                   CVE-2020-13249 CVE-2020-13630 CVE-2020-13631 \n                   CVE-2020-13632 CVE-2020-14019 CVE-2020-14040 \n                   CVE-2020-14381 CVE-2020-14382 CVE-2020-14391 \n                   CVE-2020-14422 CVE-2020-15157 CVE-2020-15503 \n                   CVE-2020-15862 CVE-2020-15999 CVE-2020-16166 \n                   CVE-2020-24490 CVE-2020-24659 CVE-2020-25211 \n                   CVE-2020-25641 CVE-2020-25658 CVE-2020-25661 \n                   CVE-2020-25662 CVE-2020-25681 CVE-2020-25682 \n                   CVE-2020-25683 CVE-2020-25684 CVE-2020-25685 \n                   CVE-2020-25686 CVE-2020-25687 CVE-2020-25694 \n                   CVE-2020-25696 CVE-2020-26160 CVE-2020-27813 \n                   CVE-2020-27846 CVE-2020-28362 CVE-2020-29652 \n                   CVE-2021-2007 CVE-2021-3121 \n=====================================================================\n\n1. Summary:\n\nRed Hat OpenShift Container Platform release 4.7.0 is now available. \n\nRed Hat Product Security has rated this update as having a security impact\nof Moderate. A Common Vulnerability Scoring System (CVSS) base score, which\ngives a detailed severity rating, is available for each vulnerability from\nthe CVE link(s) in the References section. \n\n2. Description:\n\nRed Hat OpenShift Container Platform is Red Hat\u0027s cloud computing\nKubernetes application platform solution designed for on-premise or private\ncloud deployments. \n\nThis advisory contains the container images for Red Hat OpenShift Container\nPlatform 4.7.0. See the following advisory for the RPM packages for this\nrelease:\n\nhttps://access.redhat.com/errata/RHSA-2020:5634\n\nSpace precludes documenting all of the container images in this advisory. \nSee the following Release Notes documentation, which will be updated\nshortly for this release, for details about these changes:\n\nhttps://docs.openshift.com/container-platform/4.7/release_notes/ocp-4-7-rel\nease-notes.html\n\nYou may download the oc tool and use it to inspect release image metadata\nas follows:\n\n(For x86_64 architecture)\n\n  $ oc adm release info\nquay.io/openshift-release-dev/ocp-release:4.7.0-x86_64\n\nThe image digest is\nsha256:d74b1cfa81f8c9cc23336aee72d8ae9c9905e62c4874b071317a078c316f8a70\n\n(For s390x architecture)\n\n  $ oc adm release info\nquay.io/openshift-release-dev/ocp-release:4.7.0-s390x\n\nThe image digest is\nsha256:a68ca03d87496ddfea0ac26b82af77231583a58a7836b95de85efe5e390ad45d\n\n(For ppc64le architecture)\n\n  $ oc adm release info\nquay.io/openshift-release-dev/ocp-release:4.7.0-ppc64le\n\nThe image digest is\nsha256:bc7b04e038c8ff3a33b827f4ee19aa79b26e14c359a7dcc1ced9f3b58e5f1ac6\n\nAll OpenShift Container Platform 4.7 users are advised to upgrade to these\nupdated packages and images when they are available in the appropriate\nrelease channel. To check for available updates, use the OpenShift Console\nor the CLI oc command. Instructions for upgrading a cluster are available\nat\nhttps://docs.openshift.com/container-platform/4.7/updating/updating-cluster\n- -between-minor.html#understanding-upgrade-channels_updating-cluster-between\n- -minor. \n\nSecurity Fix(es):\n\n* crewjam/saml: authentication bypass in saml authentication\n(CVE-2020-27846)\n\n* golang: crypto/ssh: crafted authentication request can lead to nil\npointer dereference (CVE-2020-29652)\n\n* gogo/protobuf: plugin/unmarshal/unmarshal.go lacks certain index\nvalidation (CVE-2021-3121)\n\n* nodejs-y18n: prototype pollution vulnerability (CVE-2020-7774)\n\n* kubernetes: Secret leaks in kube-controller-manager when using vSphere\nProvider (CVE-2020-8563)\n\n* containernetworking/plugins: IPv6 router advertisements allow for MitM\nattacks on IPv4 clusters (CVE-2020-10749)\n\n* heketi: gluster-block volume password details available in logs\n(CVE-2020-10763)\n\n* golang.org/x/text: possibility to trigger an infinite loop in\nencoding/unicode could lead to crash (CVE-2020-14040)\n\n* jwt-go: access restriction bypass vulnerability (CVE-2020-26160)\n\n* golang-github-gorilla-websocket: integer overflow leads to denial of\nservice (CVE-2020-27813)\n\n* golang: math/big: panic during recursive division of very large numbers\n(CVE-2020-28362)\n\nFor more details about the security issue(s), including the impact, a CVSS\nscore, acknowledgments, and other related information, refer to the CVE\npage(s) listed in the References section. \n\n3. Solution:\n\nFor OpenShift Container Platform 4.7, see the following documentation,\nwhich\nwill be updated shortly for this release, for important instructions on how\nto upgrade your cluster and fully apply this asynchronous errata update:\n\nhttps://docs.openshift.com/container-platform/4.7/release_notes/ocp-4-7-rel\nease-notes.html\n\nDetails on how to access this content are available at\nhttps://docs.openshift.com/container-platform/4.7/updating/updating-cluster\n- -cli.html. \n\n4. Bugs fixed (https://bugzilla.redhat.com/):\n\n1620608 - Restoring deployment config with history leads to weird state\n1752220 - [OVN] Network Policy fails to work when project label gets overwritten\n1756096 - Local storage operator should implement must-gather spec\n1756173 - /etc/udev/rules.d/66-azure-storage.rules missing from initramfs\n1768255 - installer reports 100% complete but failing components\n1770017 - Init containers restart when the exited container is removed from node. \n1775057 - [MSTR-485] Cluster is abnormal after etcd backup/restore when the backup is conducted during etcd encryption is migrating\n1775444 - RFE: k8s cpu manager does not restrict /usr/bin/pod cpuset\n1777038 - Cluster scaled beyond host subnet limits does not fire alert or cleanly report why it cannot scale\n1777224 - InfraID in metadata.json and .openshift_install_state.json is not consistent when repeating `create` commands\n1784298 - \"Displaying with reduced resolution due to large dataset.\" would show under some conditions\n1785399 - Under condition of heavy pod creation, creation fails with \u0027error reserving pod name ...: name is reserved\"\n1797766 - Resource Requirements\" specDescriptor fields - CPU and Memory injects empty string YAML editor\n1801089 - [OVN] Installation failed and monitoring pod not created due to some network error. \n1805025 - [OSP] Machine status doesn\u0027t become \"Failed\" when creating a machine with invalid image\n1805639 - Machine status should be \"Failed\" when creating a machine with invalid machine configuration\n1806000 - CRI-O failing with: error reserving ctr name\n1806915 - openshift-service-ca: Some core components are in openshift.io/run-level 1 and are bypassing SCC, but should not be\n1806917 - openshift-service-ca-operator: Some core components are in openshift.io/run-level 1 and are bypassing SCC, but should not be\n1810438 - Installation logs are not gathered from OCP nodes\n1812085 - kubernetes-networking-namespace-pods dashboard doesn\u0027t exist\n1812412 - Monitoring Dashboard: on restricted cluster, query timed out in expression evaluation\n1813012 - EtcdDiscoveryDomain no longer needed\n1813949 - openshift-install doesn\u0027t use env variables for OS_* for some of API endpoints\n1816812 - OpenShift test suites are not resilient to rate limited registries (like docker.io) and cannot control their dependencies for offline use\n1819053 - loading OpenAPI spec for \"v1beta1.metrics.k8s.io\" failed with: OpenAPI spec does not exist\n1819457 - Package Server is in \u0027Cannot update\u0027 status despite properly working\n1820141 - [RFE] deploy qemu-quest-agent on the nodes\n1822744 - OCS Installation CI test flaking\n1824038 - Integration Tests: StaleElementReferenceError in OLM single-installmode scenario\n1825892 - StorageClasses and PVs are not cleaned completely after running the csi verification tool\n1826301 - Wrong NodeStatus reports in file-integrity scan when configuration error in aide.conf file\n1829723 - User workload monitoring alerts fire out of the box\n1832968 - oc adm catalog mirror does not mirror the index image itself\n1833012 - Lower OVNKubernetes HTTP E/W performance compared with OpenShiftSDN\n1833220 - CVE-2020-10749 containernetworking/plugins: IPv6 router advertisements allow for MitM attacks on IPv4 clusters\n1834995 - olmFull suite always fails once th suite is run on the same cluster\n1836017 - vSphere UPI: Both Internal and External load balancers for kube-apiserver should use /readyz\n1837953 - Replacing masters doesn\u0027t work for ovn-kubernetes 4.4\n1838352 - OperatorExited, Pending marketplace-operator-... pod for several weeks\n1838751 - [oVirt][Tracker] Re-enable skipped network tests\n1839239 - csi-snapshot-controller flickers Degraded=True on etcd hiccups\n1840759 - [aws-ebs-csi-driver] The volume created by aws ebs csi driver can not be deleted when the cluster is destroyed\n1841039 - authentication-operator: Add e2e test for password grants to Keycloak being set as OIDC IdP\n1841119 - Get rid of config patches and pass flags directly to kcm\n1841175 - When an Install Plan gets deleted, OLM does not create a new one\n1841381 - Issue with memoryMB validation\n1841885 - oc adm catalog mirror command attempts to pull from registry.redhat.io when using --from-dir option\n1844727 - Etcd container leaves grep and lsof zombie processes\n1845387 - CVE-2020-10763 heketi: gluster-block volume password details available in logs\n1847074 - Filter bar layout issues at some screen widths on search page\n1848358 - CRDs with preserveUnknownFields:true don\u0027t reflect in status that they are non-structural\n1849543 - [4.5]kubeletconfig\u0027s description will show multiple lines for finalizers when upgrade from 4.4.8-\u003e4.5\n1851103 - Use of NetworkManager-wait-online.service in rhcos-growpart.service\n1851203 - [GSS] [RFE] Need a simpler representation of capactiy breakdown in total usage and per project breakdown in OCS 4 dashboard\n1851351 - OCP 4.4.9: EtcdMemberIPMigratorDegraded: rpc error: code = Canceled desc = grpc: the client connection is closing\n1851693 - The `oc apply` should return errors instead of hanging there when failing to create the CRD\n1852289 - Upgrade testsuite fails on ppc64le environment - Unsupported LoadBalancer service\n1853115 - the restriction of --cloud option should be shown in help text. \n1853116 - `--to` option does not work with `--credentials-requests` flag. \n1853352 - [v2v][UI] Storage Class fields Should  Not be empty  in VM  disks view\n1853652 - CVE-2020-14040 golang.org/x/text: possibility to trigger an infinite loop in encoding/unicode could lead to crash\n1854567 - \"Installed Operators\" list showing \"duplicated\" entries during installation\n1855325 - [Feature:Prometheus][Conformance] Prometheus when installed on the cluster [Top Level] [Feature:Prometheus][Conformance] Prometheus when installed on the cluster should report telemetry if a cloud.openshift.com token is present\n1855351 - Inconsistent Installer reactions to Ctrl-C during user input process\n1855408 - OVN cluster unstable after running minimal scale test\n1856351 - Build page should show metrics for when the build ran, not the last 30 minutes\n1856354 - New APIServices missing from OpenAPI definitions\n1857446 - ARO/Azure: excessive pod memory allocation causes node lockup\n1857877 - Operator upgrades can delete existing CSV before completion\n1858578 - [v2v] [ui] VM import RHV to CNV Target VM Name longer than 63 chars should not be allowed\n1859174 - [IPI][OSP] Having errors from 4.3 to 4.6 about Security group rule already created\n1860136 - default ingress does not propagate annotations to route object on update\n1860322 - [OCPv4.5.2] after unexpected shutdown one of RHV Hypervisors, OCP worker nodes machine are marked as \"Failed\"\n1860518 - unable to stop a crio pod\n1861383 - Route with `haproxy.router.openshift.io/timeout: 365d` kills the ingress controller\n1862430 - LSO: PV creation lock should not be acquired in a loop\n1862489 - LSO autoprovisioning should exclude top level disks that are part of LVM volume group. \n1862608 - Virtual media does not work on hosts using BIOS, only UEFI\n1862918 - [v2v] User should only select SRIOV network when importin vm with SRIOV network\n1865743 - Some pods are stuck in ContainerCreating and some sdn pods are in CrashLoopBackOff\n1865839 - rpm-ostree fails with \"System transaction in progress\" when moving to kernel-rt\n1866043 - Configurable table column headers can be illegible\n1866087 - Examining agones helm chart resources results in \"Oh no!\"\n1866261 - Need to indicate the intentional behavior for Ansible in the `create api` help info\n1866298 - [RHOCS Usability Study][Installation] Labeling the namespace should be a part of the installation flow or be clearer as a requirement\n1866320 - [RHOCS Usability Study][Dashboard] Users were confused by Available Capacity and the Total Capacity\n1866334 - [RHOCS Usability Study][Installation] On the Operator installation page, there\u2019s no indication on which labels offer tooltip/help\n1866340 - [RHOCS Usability Study][Dashboard] It was not clear why \u201cNo persistent storage alerts\u201d was prominently displayed\n1866343 - [RHOCS Usability Study][Dashboard] User wanted to know the time frame for Data Consumption, e.g I/O Operations\n1866445 - kola --basic-qemu-scenarios scenario fail on ppc64le \u0026 s390x\n1866482 - Few errors are seen when oc adm must-gather is run\n1866605 - No metadata.generation set for build and buildconfig objects\n1866873 - MCDDrainError \"Drain failed on  , updates may be blocked\" missing rendered node name\n1866901 - Deployment strategy for BMO allows multiple pods to run at the same time\n1866925 - openshift-install destroy cluster should fail quickly when provided with invalid credentials on Azure. \n1867165 - Cannot assign static address to baremetal install bootstrap vm\n1867380 - When using webhooks in OCP 4.5 fails to rollout latest deploymentconfig\n1867400 - [OCs 4.5]UI should not allow creation of second storagecluster of different mode in a single OCS\n1867477 - HPA monitoring cpu utilization fails for deployments which have init containers\n1867518 - [oc] oc should not print so many goroutines when ANY command fails\n1867608 - ds/machine-config-daemon takes 100+ minutes to rollout on  250 node cluster\n1867965 - OpenShift Console Deployment Edit overwrites deployment yaml\n1868004 - opm index add appears to produce image with wrong registry server binary\n1868065 - oc -o jsonpath prints possible warning / bug \"Unable to decode server response into a Table\"\n1868104 - Baremetal actuator should not delete Machine objects\n1868125 - opm index add is not creating an index with valid images when --permissive flag is added, the index is empty instead\n1868384 - CLI does not save login credentials as expected when using the same username in multiple clusters\n1868527 - OpenShift Storage using VMWare vSAN receives error \"Failed to add disk \u0027scsi0:2\u0027\" when mounted pod is created on separate node\n1868645 - After a disaster recovery pods a stuck in \"NodeAffinity\" state and not running\n1868748 - ClusterProvisioningIP in baremetal platform has wrong JSON annotation\n1868765 - [vsphere][ci] could not reserve an IP address: no available addresses\n1868770 - catalogSource named \"redhat-operators\" deleted in a disconnected cluster\n1868976 - Prometheus error opening query log file on EBS backed PVC\n1869293 - The configmap name looks confusing in aide-ds pod logs\n1869606 - crio\u0027s failing to delete a network namespace\n1870337 - [sig-storage] Managed cluster should have no crashlooping recycler pods over four minutes\n1870342 - [sig-scheduling] SchedulerPredicates [Serial] validates resource limits of pods that are allowed to run  [Conformance]\n1870373 - Ingress Operator reports available when DNS fails to provision\n1870467 - D/DC Part of Helm / Operator Backed should not have HPA\n1870728 - openshift-install creates expired ignition files from stale .openshift_install_state.json\n1870800 - [4.6] Managed Column not appearing on Pods Details page\n1871170 - e2e tests are needed to validate the functionality of the etcdctl container\n1872001 - EtcdDiscoveryDomain no longer needed\n1872095 - content are expanded to the whole line when only one column in table on Resource Details page\n1872124 - Could not choose device type as \"disk\" or \"part\" when create localvolumeset from web console\n1872128 - Can\u0027t run container with hostPort on ipv6 cluster\n1872166 - \u0027Silences\u0027 link redirects to unexpected \u0027Alerts\u0027 view after creating a silence in the Developer perspective\n1872251 - [aws-ebs-csi-driver] Verify job in CI doesn\u0027t check for vendor dir sanity\n1872786 - Rules in kube-apiserver.rules are taking too long and consuming too much memory for Prometheus to evaluate them\n1872821 - [DOC] Typo in Ansible Operator Tutorial\n1872907 - Fail to create CR from generated Helm Base Operator\n1872923 - Click \"Cancel\" button on the \"initialization-resource\" creation form page should send users to the \"Operator details\" page instead of \"Install Operator\" page (previous page)\n1873007 - [downstream] failed to read config when running the operator-sdk in the home path\n1873030 - Subscriptions without any candidate operators should cause resolution to fail\n1873043 - Bump to latest available 1.19.x k8s\n1873114 - Nodes goes into NotReady state (VMware)\n1873288 - Changing Cluster-Wide Pull Secret Does Not Trigger Updates In Kubelet Filesystem\n1873305 - Failed to power on /inspect node when using Redfish protocol\n1873326 - Accessibility - The symbols e.g checkmark in the overview page has no text description, label, or other accessible information\n1873480 - Accessibility - No text description, alt text, label, or other accessible information associated with the help icon: \u201c?\u201d button/icon in Developer Console -\u003eNavigation\n1873556 - [Openstack] HTTP_PROXY setting for NetworkManager-resolv-prepender not working\n1873593 - MCO fails to cope with ContainerRuntimeConfig thas has a name \u003e 63 characters\n1874057 - Pod stuck in CreateContainerError - error msg=\"container_linux.go:348: starting container process caused \\\"chdir to cwd (\\\\\\\"/mount-point\\\\\\\") set in config.json failed: permission denied\\\"\"\n1874074 - [CNV] Windows 2019 Default Template Not Defaulting to Proper NIC/Storage Driver\n1874192 - [RFE] \"Create Backing Store\" page doesn\u0027t allow to select already defined k8s secret as target bucket credentials when Google Cloud Storage is selected as a provider\n1874240 - [vsphere] unable to deprovision - Runtime error list attached objects\n1874248 - Include validation for vcenter host in the install-config\n1874340 - vmware: NodeClockNotSynchronising alert is triggered in openshift cluster after upgrading form 4.4.16 to 4.5.6\n1874583 - apiserver tries and fails to log an event when shutting down\n1874584 - add retry for etcd errors in kube-apiserver\n1874638 - Missing logging for nbctl daemon\n1874736 - [downstream] no version info for the helm-operator\n1874901 - add utm_source parameter to Red Hat Marketplace URLs for attribution\n1874968 - Accessibility: The project selection drop down is a keyboard trap\n1875247 - Dependency resolution error \"found more than one head for channel\" is unhelpful for users\n1875516 - disabled scheduling is easy to miss in node page of OCP console\n1875598 - machine status is Running for a master node which has been terminated from the console\n1875806 - When creating a service of type \"LoadBalancer\" (Kuryr,OVN) communication through this loadbalancer failes after 2-5 minutes. \n1876166 - need to be able to disable kube-apiserver connectivity checks\n1876469 - Invalid doc link on yaml template schema description\n1876701 - podCount specDescriptor change doesn\u0027t take effect on operand details page\n1876815 - Installer uses the environment variable OS_CLOUD for manifest generation despite explicit prompt\n1876935 - AWS volume snapshot is not deleted after the cluster is destroyed\n1877071 - vSphere IPI - Nameserver limits were exceeded, some nameservers have been omitted\n1877105 - add redfish to enabled_bios_interfaces\n1877116 - e2e aws calico tests fail with `rpc error: code = ResourceExhausted`\n1877273 - [OVN] EgressIP cannot fail over to available nodes after one egressIP node shutdown\n1877648 - [sriov]VF from allocatable and capacity of node is incorrect when the policy is only \u0027rootDevices\u0027\n1877681 - Manually created PV can not be used\n1877693 - dnsrecords specify recordTTL as 30 but the value is null in AWS Route 53\n1877740 - RHCOS unable to get ip address during first boot\n1877812 - [ROKS] IBM cloud failed to terminate OSDs when upgraded between internal builds of OCS 4.5\n1877919 - panic in multus-admission-controller\n1877924 - Cannot set BIOS config using Redfish with Dell iDracs\n1878022 - Met imagestreamimport error when import the whole image repository\n1878086 - OCP 4.6+OCS 4.6(multiple SC) Internal Mode- UI should populate the default \"Filesystem Name\" instead of providing a textbox, \u0026 the name should be validated\n1878301 - [4.6] [UI] Unschedulable used to always be displayed when Node is Ready status\n1878701 - After deleting and recreating a VM with same name, the VM events contain the events from the old VM\n1878766 - CPU consumption on nodes is higher than the CPU count of the node. \n1878772 - On the nodes there are up to 547 zombie processes caused by thanos and Prometheus. \n1878823 - \"oc adm release mirror\" generating incomplete imageContentSources when using \"--to\" and \"--to-release-image\"\n1878845 - 4.5 to 4.6.rc.4 upgrade failure: authentication operator health check connection refused for multitenant mode\n1878900 - Installer complains about not enough vcpu for the baremetal flavor where generic bm flavor is being used\n1878953 - RBAC error shows when normal user access pvc upload page\n1878956 - `oc api-resources` does not include API version\n1878972 - oc adm release mirror removes the architecture information\n1879013 - [RFE]Improve CD-ROM interface selection\n1879056 - UI should allow to change or unset the evictionStrategy\n1879057 - [CSI Certificate Test] Test failed for CSI certification tests for CSIdriver openshift-storage.rbd.csi.ceph.com with RWX enabled\n1879094 - RHCOS dhcp kernel parameters not working as expected\n1879099 - Extra reboot during 4.5 -\u003e 4.6 upgrade\n1879244 - Error adding container to network \"ipvlan-host-local\": \"master\" field is required\n1879248 - OLM Cert Dir for Webhooks does not align SDK/Kubebuilder\n1879282 - Update OLM references to point to the OLM\u0027s new doc site\n1879283 - panic after nil pointer dereference in pkg/daemon/update.go\n1879365 - Overlapping, divergent openshift-cluster-storage-operator manifests\n1879419 - [RFE]Improve boot source description for \u0027Container\u0027 and \u2018URL\u2019\n1879430 - openshift-object-counts quota is not dynamically updating as the resource is deleted. \n1879565 - IPv6 installation fails on node-valid-hostname\n1879777 - Overlapping, divergent openshift-machine-api namespace manifests\n1879878 - Messages flooded in thanos-querier pod- oauth-proxy container: Authorization header does not start with \u0027Basic\u0027, skipping basic authentication in Log message in thanos-querier pod the oauth-proxy\n1879930 - Annotations shouldn\u0027t be removed during object reconciliation\n1879976 - No other channel visible from console\n1880068 - image pruner is not aware of image policy annotation, StatefulSets, etc. \n1880148 - dns daemonset rolls out slowly in large clusters\n1880161 - Actuator Update calls should have fixed retry time\n1880259 - additional network + OVN network installation failed\n1880389 - Pipeline Runs with skipped Tasks incorrectly show Tasks as \"Failed\"\n1880410 - Convert Pipeline Visualization node to SVG\n1880417 - [vmware] Fail to boot with Secure Boot enabled, kernel lockdown denies iopl access to afterburn\n1880443 - broken machine pool management on OpenStack\n1880450 - Host failed to install because its installation stage joined took longer than expected 20m0s. \n1880473 - IBM Cloudpak operators installation stuck \"UpgradePending\" with InstallPlan status updates failing due to size limitation\n1880680 - [4.3] [Tigera plugin] - openshift-kube-proxy fails - Failed to execute iptables-restore: exit status 4 (iptables-restore v1.8.4 (nf_tables)\n1880785 - CredentialsRequest missing description in `oc explain`\n1880787 - No description for Provisioning CRD for `oc explain`\n1880902 - need dnsPlocy set in crd ingresscontrollers\n1880913 - [DeScheduler] - change loglevel from Info to Error when priority class given in the descheduler params is not present in the cluster\n1881027 - Cluster installation fails at with error :  the container name \\\"assisted-installer\\\" is already in use\n1881046 - [OSP] openstack-cinder-csi-driver-operator doesn\u0027t contain required manifests and assets\n1881155 - operator install authentication: Authentication require functional ingress which requires at least one schedulable and ready node\n1881268 - Image uploading failed but wizard claim the source is available\n1881322 - kube-scheduler not scheduling pods for certificates not renewed automatically after nodes restoration\n1881347 - [v2v][ui]VM Import Wizard does not call Import provider cleanup\n1881881 - unable to specify target port manually resulting in application not reachable\n1881898 - misalignment of sub-title in quick start headers\n1882022 - [vsphere][ipi] directory path is incomplete, terraform can\u0027t find the cluster\n1882057 - Not able to select access modes for snapshot and clone\n1882140 - No description for spec.kubeletConfig\n1882176 - Master recovery instructions don\u0027t handle IP change well\n1882191 - Installation fails against external resources which lack DNS Subject Alternative Name\n1882209 - [ BateMetal IPI ] local coredns resolution not working\n1882210 - [release 4.7] insights-operator: Fix bug in reflector not recovering from \"Too large resource version\"\n1882268 - [e2e][automation]Add Integration Test for Snapshots\n1882361 - Retrieve and expose the latest report for the cluster\n1882485 - dns-node-resolver corrupts /etc/hosts if internal registry is not in use\n1882556 - git:// protocol in origin tests is not currently proxied\n1882569 - CNO: Replacing masters doesn\u0027t work for ovn-kubernetes 4.4\n1882608 - Spot instance not getting created on AzureGovCloud\n1882630 - Fstype is changed after deleting pv provisioned by localvolumeset instance\n1882649 - IPI installer labels all images it uploads into glance as qcow2\n1882653 - The Approval should display the Manual after the APPROVAL changed to Manual from the Automatic\n1882658 - [RFE] Volume Snapshot is not listed under inventory in Project Details page\n1882660 - Operators in a namespace should be installed together when approve one\n1882667 - [ovn] br-ex Link not found when scale up RHEL worker\n1882723 - [vsphere]Suggested mimimum value for providerspec not working\n1882730 - z systems not reporting correct core count in recording rule\n1882750 - [sig-api-machinery][Feature:APIServer][Late] kubelet terminates kube-apiserver gracefully\n1882781 - nameserver= option to dracut creates extra NM connection profile\n1882785 - Multi-Arch CI Jobs destroy libvirt network but occasionally leave it defined\n1882844 - [IPI on vsphere] Executing \u0027openshift-installer destroy cluster\u0027 leaves installer tag categories in vsphere\n1883371 - CVE-2020-26160 jwt-go: access restriction bypass vulnerability\n1883388 - Bare Metal Hosts Details page doesn\u0027t show Mainitenance and Power On/Off status\n1883422 - operator-sdk cleanup fail after installing operator with \"run bundle\" without installmode and og with ownnamespace\n1883425 - Gather top installplans and their count\n1883502 - Logging is broken due to mix of k8s.io/klog v1 and v2\n1883523 - [sig-cli] oc adm must-gather runs successfully for audit logs [Suite:openshift/conformance/parallel]\n1883538 - must gather report \"cannot file manila/aws ebs/ovirt csi related namespaces and objects\" error\n1883560 - operator-registry image needs clean up in /tmp\n1883563 - Creating duplicate namespace from create namespace modal breaks the UI\n1883614 - [OCP 4.6] [UI] UI should not describe power cycle as \"graceful\"\n1883642 - [sig-imageregistry][Feature:ImageTriggers][Serial] ImageStream admission TestImageStreamAdmitSpecUpdate\n1883660 - e2e-metal-ipi CI job consistently failing on 4.4\n1883765 - [user workload monitoring] improve latency of Thanos sidecar  when streaming read requests\n1883766 - [e2e][automation] Adjust tests for UI changes\n1883768 - [user workload monitoring] The Prometheus operator should discard invalid TLS configurations\n1883773 - opm alpha bundle build fails on win10 home\n1883790 - revert \"force cert rotation every couple days for development\" in 4.7\n1883803 - node pull secret feature is not working as expected\n1883836 - Jenkins imagestream ubi8 and nodejs12 update\n1883847 - The UI does not show checkbox for enable encryption at rest for OCS\n1883853 - go list -m all does not work\n1883905 - race condition in opm index add --overwrite-latest\n1883946 - Understand why trident CSI pods are getting deleted by OCP\n1884035 - Pods are illegally transitioning back to pending\n1884041 - e2e should provide error info when minimum number of pods aren\u0027t ready in kube-system namespace\n1884131 - oauth-proxy repository should run tests\n1884165 - Repos should be disabled in -firstboot.service before OS extensions are applied\n1884221 - IO becomes unhealthy due to a file change\n1884258 - Node network alerts should work on ratio rather than absolute values\n1884270 - Git clone does not support SCP-style ssh locations\n1884334 - CVO marks an upgrade as failed when an operator takes more than 20 minutes to rollout\n1884435 - vsphere - loopback is randomly not being added to resolver\n1884565 - oauth-proxy crashes on invalid usage\n1884584 - Kuryr controller continuously restarting due to unable to clean up Network Policy\n1884613 - Create Instance of Prometheus from operator returns blank page for non cluster-admin users\n1884628 - ovs-configuration service fails when the external network is configured on a tagged vlan on top of a bond device on a baremetal IPI deployment\n1884629 - Visusally impaired user using screen reader not able to select Admin/Developer console options in drop down menu. \n1884632 - Adding BYOK disk encryption through DES\n1884654 - Utilization of a VMI is not populated\n1884655 - KeyError on self._existing_vifs[port_id]\n1884664 - Operator install page shows \"installing...\" instead of going to install status page\n1884672 - Failed to inspect hardware. Reason: unable to start inspection: \u0027idrac\u0027\n1884691 - Installer blocks cloud-credential-operator manual mode on GCP and Azure\n1884724 - Quick Start: Serverless quickstart doesn\u0027t match Operator install steps\n1884739 - Node process segfaulted\n1884824 - Update baremetal-operator libraries to k8s 1.19\n1885002 - network kube-rbac-proxy scripts crashloop rather than non-crash looping\n1885138 - Wrong detection of pending state in VM details\n1885151 - [Cloud Team - Cluster API Provider Azure] Logging is broken due to mix of k8s.io/klog v1 and v2\n1885165 - NoRunningOvnMaster alert falsely triggered\n1885170 - Nil pointer when verifying images\n1885173 - [e2e][automation] Add test for next run configuration feature\n1885179 - oc image append fails on push (uploading a new layer)\n1885213 - Vertical Pod Autoscaler (VPA) not working with DeploymentConfig\n1885218 - [e2e][automation] Add virtctl to gating script\n1885223 - Sync with upstream (fix panicking cluster-capacity binary)\n1885235 - Prometheus: Logging is broken due to mix of k8s.io/klog v1 and v2\n1885241 - kube-rbac-proxy: Logging is broken due to mix of k8s.io/klog v1 and v2\n1885243 - prometheus-adapter: Logging is broken due to mix of k8s.io/klog v1 and v2\n1885244 - prometheus-operator: Logging is broken due to mix of k8s.io/klog v1 and v2\n1885246 - cluster-monitoring-operator: Logging is broken due to mix of k8s.io/klog v1 and v2\n1885249 - openshift-state-metrics: Logging is broken due to mix of k8s.io/klog v1 and v2\n1885308 - Supermicro nodes failed to boot via disk during installation when using IPMI and UEFI\n1885315 - unit tests fail on slow disks\n1885319 - Remove redundant use of group and kind of DataVolumeTemplate\n1885343 - Console doesn\u0027t load in iOS Safari when using self-signed certificates\n1885344 - 4.7 upgrade - dummy bug for 1880591\n1885358 - add p\u0026f configuration to protect openshift traffic\n1885365 - MCO does not respect the install section of systemd files when enabling\n1885376 - failed to initialize the cluster: Cluster operator marketplace is still updating\n1885398 - CSV with only Webhook conversion can\u0027t be installed\n1885403 - Some OLM events hide the underlying errors\n1885414 - Need to disable HTX when not using HTTP/2 in order to preserve HTTP header name case\n1885425 - opm index add cannot batch add multiple bundles that use skips\n1885543 - node tuning operator builds and installs an unsigned RPM\n1885644 - Panic output due to timeouts in openshift-apiserver\n1885676 - [OCP 4.7]UI should fallback to minimal deployment only after total CPU \u003c 30 || totalMemory \u003c 72 GiB for initial deployment\n1885702 - Cypress:  Fix \u0027aria-hidden-focus\u0027 accesibility violations\n1885706 - Cypress:  Fix \u0027link-name\u0027 accesibility violation\n1885761 - DNS fails to resolve in some pods\n1885856 - Missing registry v1 protocol usage metric on telemetry\n1885864 - Stalld service crashed under the worker node\n1885930 - [release 4.7] Collect ServiceAccount statistics\n1885940 - kuryr/demo image ping not working\n1886007 - upgrade test with service type load balancer will never work\n1886022 - Move range allocations to CRD\u0027s\n1886028 - [BM][IPI] Failed to delete node after scale down\n1886111 - UpdatingopenshiftStateMetricsFailed: DeploymentRollout of openshift-monitoring/openshift-state-metrics: got 1 unavailable replicas\n1886134 - Need to set GODEBUG=x509ignoreCN=0 in initrd\n1886154 - System roles are not present while trying to create new role binding through web console\n1886166 - 1885517 Clone - Not needed for 4.7 - upgrade from 4.5-\u003e4.6 causes broadcast storm\n1886168 - Remove Terminal Option for Windows Nodes\n1886200 - greenwave / CVP is failing on bundle validations, cannot stage push\n1886229 - Multipath support for RHCOS sysroot\n1886294 - Unable to schedule a pod due to Insufficient ephemeral-storage\n1886327 - Attempt to add a worker using bad roodDeviceHint: bmh and machine become Provisioned, no error in status\n1886353 - [e2e][automation] kubevirt-gating job fails for a missing virtctl URL\n1886397 - Move object-enum to console-shared\n1886423 - New Affinities don\u0027t contain ID until saving\n1886435 - Azure UPI uses deprecated command \u0027group deployment\u0027\n1886449 - p\u0026f: add configuration to protect oauth server traffic\n1886452 - layout options doesn\u0027t gets selected style on click i.e grey background\n1886462 - IO doesn\u0027t recognize namespaces - 2 resources with the same name in 2 namespaces -\u003e only 1 gets collected\n1886488 - move e2e test off of nfs image from docker.io/gmontero/nfs-server:latest\n1886524 - Change default terminal command for Windows Pods\n1886553 - i/o timeout experienced from build02 when targeting CI test cluster during test execution\n1886600 - panic: assignment to entry in nil map\n1886620 - Application behind service load balancer with PDB is not disrupted\n1886627 - Kube-apiserver pods restarting/reinitializing periodically\n1886635 - CVE-2020-8563 kubernetes: Secret leaks in kube-controller-manager when using vSphere Provider\n1886636 - Panic in machine-config-operator\n1886749 - Removing network policy from namespace causes inability to access pods through loadbalancer. \n1886751 - Gather MachineConfigPools\n1886766 - PVC dropdown has \u0027Persistent Volume\u0027 Label\n1886834 - ovn-cert is mandatory in both master and node daemonsets\n1886848 - [OSP] machine instance-state annotation discrepancy with providerStatus.instanceState\n1886861 - ordered-values.yaml not honored if values.schema.json provided\n1886871 - Neutron ports created for hostNetworking pods\n1886890 - Overwrite jenkins-agent-base imagestream\n1886900 - Cluster-version operator fills logs with \"Manifest: ...\" spew\n1886922 - [sig-network] pods should successfully create sandboxes by getting pod\n1886973 - Local storage operator doesn\u0027t include correctly populate LocalVolumeDiscoveryResult in console\n1886977 - [v2v]Incorrect VM Provider type displayed in UI while importing VMs through VMIO\n1887010 - Imagepruner met error \"Job has reached the specified backoff limit\" which causes image registry degraded\n1887026 - FC volume attach fails with \u201cno fc disk found\u201d error on OCP 4.6 PowerVM cluster\n1887040 - [upgrade] ovs pod crash for rhel worker when upgarde from 4.5 to 4.6\n1887046 - Event for LSO need update to avoid confusion\n1887088 - cluster-node-tuning-operator refers to missing cluster-node-tuned image\n1887375 - User should be able to specify volumeMode when creating pvc from web-console\n1887380 - Unsupported access mode should not be available to select when creating pvc by aws-ebs-csi-driver(gp2-csi) from web-console\n1887392 - openshift-apiserver: delegated authn/z should have ttl \u003e metrics/healthz/readyz/openapi interval\n1887428 - oauth-apiserver service should be monitored by prometheus\n1887441 - ingress misconfiguration may break authentication but ingress operator keeps reporting \"degraded: False\"\n1887454 - [sig-storage] In-tree Volumes [Driver: azure-disk] [Testpattern: Dynamic PV (ext4)] volumes should store data\n1887456 - It is impossible to attach the default NIC to a bridge with the latest version of OVN Kubernetes\n1887465 - Deleted project is still referenced\n1887472 - unable to edit application group for KSVC via gestures (shift+Drag)\n1887488 - OCP 4.6:  Topology Manager OpenShift E2E test fails:  gu workload attached to SRIOV networks should let resource-aligned PODs have working SRIOV network interface\n1887509 - Openshift-tests conformance TopologyManager tests run when Machine Config Operator is not installed on cluster\n1887525 - Failures to set master HardwareDetails cannot easily be debugged\n1887545 - 4.5 to 4.6 upgrade fails when external network is configured on a bond device: ovs-configuration service fails and node becomes unreachable\n1887585 - ovn-masters stuck in crashloop after scale test\n1887651 - [Internal Mode] Object gateway (RGW) in unknown state after OCP upgrade. \n1887737 - Test TestImageRegistryRemovedWithImages is failing on e2e-vsphere-operator\n1887740 - cannot install descheduler operator after uninstalling it\n1887745 - API server is throwing 5xx error code for 42.11% of requests for LIST events\n1887750 - `oc explain localvolumediscovery` returns empty description\n1887751 - `oc explain localvolumediscoveryresult` returns empty description\n1887778 - Add ContainerRuntimeConfig gatherer\n1887783 - PVC upload cannot continue after approve the certificate\n1887797 - [CNV][V2V] Default network type is bridge for interface bound to POD network in VMWare migration wizard\n1887799 - User workload monitoring prometheus-config-reloader OOM\n1887850 - [sig-auth][Feature:SCC][Early] should not have pod creation failures during install test is flaky\n1887863 - Installer panics on invalid flavor\n1887864 - Clean up dependencies to avoid invalid scan flagging\n1887934 - TestForwardedHeaderPolicyAppend, TestForwardedHeaderPolicyReplace, and TestForwardedHeaderPolicyIfNone consistently fail because of case-sensitive comparison\n1887936 - Kube-scheduler should be able to parse v1beta1 KubeSchedulerConfig\n1888015 - workaround kubelet graceful termination of static pods bug\n1888028 - prevent extra cycle in aggregated apiservers\n1888036 - Operator details shows old CRD versions\n1888041 - non-terminating pods are going from running to pending\n1888072 - Setting Supermicro node to PXE boot via Redfish doesn\u0027t take affect\n1888073 - Operator controller continuously busy looping\n1888118 - Memory requests not specified for image registry operator\n1888150 - Install Operand Form on OperatorHub is displaying unformatted text\n1888172 - PR 209 didn\u0027t update the sample archive, but machineset and pdbs are now namespaced\n1888227 - Failed to deploy some of container image on the recent OCP 4.6 nightly build\n1888292 - Fix CVE-2015-7501 affecting agent-maven-3.5\n1888311 - p\u0026f: make SAR traffic from oauth and openshift apiserver exempt\n1888363 - namespaces crash in dev\n1888378 - [IPI on Azure] errors destroying cluster when Azure resource group was never created\n1888381 - instance:node_network_receive_bytes_excluding_lo:rate1m value twice expected\n1888464 - installer missing permission definitions for TagResources and UntagResources when installing in existing VPC\n1888494 - imagepruner pod is error when image registry storage is not configured\n1888565 - [OSP] machine-config-daemon-firstboot.service failed with \"error reading osImageURL from rpm-ostree\"\n1888595 - cluster-policy-controller logs shows error which reads initial monitor sync has error\n1888601 - The poddisruptionbudgets is using the operator service account, instead of gather\n1888657 - oc doesn\u0027t know its name\n1888663 - sdn starts after kube-apiserver, delay readyz until oauth-apiserver is reachable\n1888671 - Document the Cloud Provider\u0027s ignore-volume-az setting\n1888738 - quay.io/openshift/origin-must-gather:latest is not a multi-arch, manifest-list image\n1888763 - at least one of these parameters (Vendor, DeviceID or PfNames) has to be defined in nicSelector in CR %s\", cr.GetName()\n1888827 - ovnkube-master may segfault when trying to add IPs to a nil address set\n1888861 - need to pass dual-stack service CIDRs to kube-apiserver in dual-stack cluster\n1888866 - AggregatedAPIDown permanently firing after removing APIService\n1888870 - JS error when using autocomplete in YAML editor\n1888874 - hover message are not shown for some properties\n1888900 - align plugins versions\n1888985 - Cypress:  Fix \u0027Ensures buttons have discernible text\u0027 accesibility violation\n1889213 - The error message of uploading failure is not clear enough\n1889267 - Increase the time out for creating template and upload image in the terraform\n1889348 - Project link should be removed from Application Details page, since it is inaccurate (Application Stages)\n1889374 - Kiali feature won\u0027t work on fresh 4.6 cluster\n1889388 - ListBundles returns incorrect replaces/skips when bundles have been added via semver-skippatch mode\n1889420 - OCP failed to add vsphere disk when pod moved to new node during cluster upgrade\n1889515 - Accessibility - The symbols e.g checkmark in the Node \u003e overview page has no text description, label, or other accessible information\n1889529 - [Init-CR annotation] Inline alert shows operand instance was needed still appearing after creating an Operand instance\n1889540 - [4.5 upgrade][alert]CloudCredentialOperatorDown\n1889577 - Resources are not shown on project workloads page\n1889620 - [Azure] - Machineset not scaling when publicIP:true in disconnected Azure enviroment\n1889630 - Scheduling disabled popovers are missing for Node status in Node Overview and Details pages\n1889692 - Selected Capacity is showing wrong size\n1889694 - usbguard fails to install as RHCOS extension due to missing libprotobuf.so.15\n1889698 - When the user clicked cancel at the Create Storage Class confirmation dialog all the data from the Local volume set goes off\n1889710 - Prometheus metrics on disk take more space compared to OCP 4.5\n1889721 - opm index add semver-skippatch mode does not respect prerelease versions\n1889724 - When LocalVolumeDiscovery CR is created form the LSO page User doesn\u0027t see the Disk tab\n1889767 - [vsphere] Remove certificate from upi-installer image\n1889779 - error when destroying a vSphere installation that failed early\n1889787 - OCP is flooding the oVirt engine with auth errors\n1889838 - race in Operator update after fix from bz1888073\n1889852 - support new AWS regions ap-east-1, af-south-1, eu-south-1\n1889863 - Router prints incorrect log message for namespace label selector\n1889891 - Backport timecache LRU fix\n1889912 - Drains can cause high CPU usage\n1889921 - Reported Degraded=False Available=False pair does not make sense\n1889928 - [e2e][automation] Add more tests for golden os\n1889943 - EgressNetworkPolicy does not work when setting Allow rule to a dnsName\n1890038 - Infrastructure status.platform not migrated to status.platformStatus causes warnings\n1890074 - MCO extension kernel-headers is invalid\n1890104 - with Serverless 1.10 version of trigger/subscription/channel/IMC is V1 as latest\n1890130 - multitenant mode consistently fails CI\n1890141 - move off docker.io images for build/image-eco/templates/jenkins e2e\n1890145 - The mismatched of font size for Status Ready and Health Check secondary text\n1890180 - FieldDependency x-descriptor doesn\u0027t support non-sibling fields\n1890182 - DaemonSet with existing owner garbage collected\n1890228 - AWS: destroy stuck on route53 hosted zone not found\n1890235 - e2e: update Protractor\u0027s checkErrors logging\n1890250 - workers may fail to join the cluster during an update from 4.5\n1890256 - Replacing a master node on a baremetal IPI deployment gets stuck when deleting the machine of the unhealthy member\n1890270 - External IP doesn\u0027t work if the IP address is not assigned to a node\n1890361 - s390x: Generate new ostree rpm with fix for rootfs immutability\n1890456 - [vsphere] mapi_instance_create_failed doesn\u0027t work on vsphere\n1890467 - unable to edit an application without a service\n1890472 - [Kuryr] Bulk port creation exception not completely formatted\n1890494 - Error assigning Egress IP on GCP\n1890530 - cluster-policy-controller doesn\u0027t gracefully terminate\n1890630 - [Kuryr] Available port count not correctly calculated for alerts\n1890671 - [SA] verify-image-signature using service account does not work\n1890677 - \u0027oc image info\u0027 claims \u0027does not exist\u0027 for application/vnd.oci.image.manifest.v1+json manifest\n1890808 - New etcd alerts need to be added to the monitoring stack\n1890951 - Mirror of multiarch images together with cluster logging case problems. It doesn\u0027t sync the \"overall\" sha it syncs only the sub arch sha. \n1890984 - Rename operator-webhook-config to sriov-operator-webhook-config\n1890995 - wew-app should provide more insight into why image deployment failed\n1891023 - ovn-kubernetes rbac proxy never starts waiting for an incorrect API call\n1891047 - Helm chart fails to install using developer console because of TLS certificate error\n1891068 - [sig-instrumentation] Prometheus when installed on the cluster shouldn\u0027t report any alerts in firing state apart from Watchdog and AlertmanagerReceiversNotConfigured [Early] failing due to TargetDown alert from kube-scheduler\n1891080 - [LSO] When Localvolumeset and SC is already created before OCS install Creation of LVD and LVS is skipped when user click created storage cluster from UI\n1891108 - p\u0026f: Increase the concurrency share of workload-low priority level\n1891143 - CVO deadlocked while shutting down, shortly after fresh cluster install (metrics goroutine)\n1891189 - [LSO] max device limit is accepting negative values. PVC is not getting created and no error is shown\n1891314 - Display incompatible helm charts for installation (kubeVersion of cluster doesn\u0027t meet requirements of chart)\n1891362 - Wrong metrics count for openshift_build_result_total\n1891368 - fync should be fsync for etcdHighFsyncDurations alert\u0027s annotations.message\n1891374 - fync should be fsync for etcdHighFsyncDurations critical alert\u0027s annotations.message\n1891376 - Extra text in Cluster Utilization charts\n1891419 - Wrong detail head on network policy detail page. \n1891459 - Snapshot tests should report stderr of failed commands\n1891498 - Other machine config pools do not show during update\n1891543 - OpenShift 4.6/OSP install fails when node flavor has less than 25GB, even with dedicated storage\n1891551 - Clusterautoscaler doesn\u0027t scale up as expected\n1891552 - Handle missing labels as empty. \n1891555 - The windows oc.exe binary does not have version metadata\n1891559 - kuryr-cni cannot start new thread\n1891614 - [mlx] testpmd fails inside OpenShift pod using DevX version 19.11\n1891625 - [Release 4.7] Mutable LoadBalancer Scope\n1891702 - installer get pending when additionalTrustBundle is added into  install-config.yaml\n1891716 - OVN cluster upgrade from 4.6.1 to 4.7 fails\n1891740 - OperatorStatusChanged is noisy\n1891758 - the authentication operator may spam DeploymentUpdated event endlessly\n1891759 - Dockerfile builds cannot change /etc/pki/ca-trust\n1891816 - [UPI] [OSP] control-plane.yml provisioning playbook fails on OSP 16.1\n1891825 - Error message not very informative in case of mode mismatch\n1891898 - The ClusterServiceVersion can define Webhooks that cannot be created. \n1891951 - UI should show warning while creating pools with compression on\n1891952 - [Release 4.7] Apps Domain Enhancement\n1891993 - 4.5 to 4.6 upgrade doesn\u0027t remove deployments created by marketplace\n1891995 - OperatorHub displaying old content\n1891999 - Storage efficiency card showing wrong compression ratio\n1892004 - OCP 4.6 opm on Ubuntu 18.04.4 - error /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.28\u0027 not found (required by ./opm)\n1892167 - [SR-IOV] SriovNetworkNodePolicies apply ignoring the spec.nodeSelector. \n1892198 - TypeError in \u0027Performance Profile\u0027 tab displayed for \u0027Performance Addon Operator\u0027\n1892288 - assisted install workflow creates excessive control-plane disruption\n1892338 - HAProxyReloadFail alert only briefly fires in the event of a broken HAProxy config\n1892358 - [e2e][automation] update feature gate for kubevirt-gating job\n1892376 - Deleted netnamespace could not be re-created\n1892390 - TestOverwrite/OverwriteBundle/DefaultBehavior in operator-registry is flaky\n1892393 - TestListPackages is flaky\n1892448 - MCDPivotError alert/metric missing\n1892457 - NTO-shipped stalld needs to use FIFO for boosting. \n1892467 - linuxptp-daemon crash\n1892521 - [AWS] Startup bootstrap machine failed due to ignition file is missing in disconnected UPI env\n1892653 - User is unable to create KafkaSource with v1beta\n1892724 - VFS added to the list of devices of the nodeptpdevice CRD\n1892799 - Mounting additionalTrustBundle in the operator\n1893117 - Maintenance mode on vSphere blocks installation. \n1893351 - TLS secrets are not able to edit on console. \n1893362 - The ovs-xxxxx_openshift-sdn container does not terminate gracefully, slowing down reboots\n1893386 - false-positive ReadyIngressNodes_NoReadyIngressNodes: Auth operator makes risky \"worker\" assumption when guessing about ingress availability\n1893546 - Deploy using virtual media fails on node cleaning step\n1893601 - overview filesystem utilization of OCP is showing the wrong values\n1893645 - oc describe route SIGSEGV\n1893648 - Ironic image building process is not compatible with UEFI secure boot\n1893724 - OperatorHub generates incorrect RBAC\n1893739 - Force deletion doesn\u0027t work for snapshots if snapshotclass is already deleted\n1893776 - No useful metrics for image pull time available, making debugging issues there impossible\n1893798 - Lots of error messages starting with \"get namespace to enqueue Alertmanager instances failed\" in the logs of prometheus-operator\n1893832 - ErrorCount field is missing in baremetalhosts.metal3.io CRD\n1893889 - disabled dropdown items in the pf dropdown component are skipped over and unannounced by JAWS\n1893926 - Some \"Dynamic PV (block volmode)\" pattern storage e2e tests are wrongly skipped\n1893944 - Wrong product name for Multicloud Object Gateway\n1893953 - (release-4.7) Gather default StatefulSet configs\n1893956 - Installation always fails at \"failed to initialize the cluster: Cluster operator image-registry is still updating\"\n1893963 - [Testday] Workloads-\u003e Virtualization is not loading for Firefox browser\n1893972 - Should skip e2e test cases as early as possible\n1894013 - [v2v][Testday] VMware to CNV VM import]VMware URL: It is not clear that only the FQDN/IP address is required without \u0027https://\u0027\n1894020 - User with edit users cannot deploy images from their own namespace from the developer perspective\n1894025 - OCP 4.5 to 4.6 upgrade for \"aws-ebs-csi-driver-operator\" fails when \"defaultNodeSelector\" is set\n1894041 - [v2v][[Testday]VM import from VMware/RHV] VM import wizard: The target storage class name is not displayed if default storage class is used. \n1894065 - tag new packages to enable TLS support\n1894110 - Console shows wrong value for maxUnavailable and maxSurge when set to 0\n1894144 - CI runs of baremetal IPI are failing due to newer libvirt libraries\n1894146 - ironic-api used by metal3 is over provisioned and consumes a lot of RAM\n1894194 - KuryrPorts leftovers from 4.6 GA need to be deleted\n1894210 - Failed to encrypt OSDs on OCS4.6 installation (via UI)\n1894216 - Improve OpenShift Web Console availability\n1894275 - Fix CRO owners file to reflect node owner\n1894278 - \"database is locked\" error when adding bundle to index image\n1894330 - upgrade channels needs to be updated for 4.7\n1894342 - oauth-apiserver logs many \"[SHOULD NOT HAPPEN] failed to update managedFields for ... OAuthClient ... no corresponding type for oauth.openshift.io/v1, Kind=OAuthClient\"\n1894374 - Dont prevent the user from uploading a file with incorrect extension\n1894432 - [oVirt] sometimes installer timeout on tmp_import_vm\n1894477 - bash syntax error in nodeip-configuration.service\n1894503 - add automated test for Polarion CNV-5045\n1894519 - [OSP] External mode cluster creation disabled for Openstack and oVirt platform\n1894539 - [on-prem] Unable to deploy additional machinesets on separate subnets\n1894645 - Cinder volume provisioning crashes on nil cloud provider\n1894677 - image-pruner job is panicking: klog stack\n1894810 - Remove TechPreview Badge from Eventing in Serverless version 1.11.0\n1894860 - \u0027backend\u0027 CI job passing despite failing tests\n1894910 - Update the node to use the real-time kernel fails\n1894992 - All nightly jobs for e2e-metal-ipi failing due to ipa image missing tenacity package\n1895065 - Schema / Samples / Snippets Tabs are all selected at the same time\n1895099 - vsphere-upi and vsphere-upi-serial jobs time out waiting for bootstrap to complete in CI\n1895141 - panic in service-ca injector\n1895147 - Remove memory limits on openshift-dns\n1895169 - VM Template does not properly manage Mount Windows guest tools check box during VM creation\n1895268 - The bundleAPIs should NOT be empty\n1895309 - [OCP v47] The RHEL node scaleup fails due to \"No package matching \u0027cri-o-1.19.*\u0027 found available\" on OCP 4.7 cluster\n1895329 - The infra index filled with warnings \"WARNING: kubernetes.io/cinder built-in volume provider is now deprecated. The Cinder volume provider is deprecated and will be removed in a future release\"\n1895360 - Machine Config Daemon removes a file although its defined in the dropin\n1895367 - Missing image in metadata DB index.db in disconnected Operator Hub installation. OCP 4.6.1\n1895372 - Web console going blank after selecting any operator to install from OperatorHub\n1895385 - Revert KUBELET_LOG_LEVEL back to level 3\n1895423 - unable to edit an application with a custom builder image\n1895430 - unable to edit custom template application\n1895509 - Backup taken on one master cannot be restored on other masters\n1895537 - [sig-imageregistry][Feature:ImageExtract] Image extract should extract content from an image\n1895838 - oc explain description contains \u0027/\u0027\n1895908 - \"virtio\" option is not available when modifying a CD-ROM to disk type\n1895909 - e2e-metal-ipi-ovn-dualstack is failing\n1895919 - NTO fails to load kernel modules\n1895959 - configuring webhook token authentication should prevent cluster upgrades\n1895979 - Unable to get coreos-installer with --copy-network to work\n1896101 - [cnv][automation] Added negative tests for migration from VMWare and RHV\n1896160 - CI: Some cluster operators are not ready: marketplace (missing: Degraded)\n1896188 - [sig-cli] oc debug deployment configs from a build: local-busybox-1-build not completed\n1896218 - Occasional GCP install failures: Error setting IAM policy for project ...: googleapi: Error 400: Service account ... does not exist., badRequest\n1896229 - Current Rate of Bytes Received and Current Rate of Bytes Transmitted data can not be loaded\n1896244 - Found a panic in storage e2e test\n1896296 - Git links should avoid .git as part of the URL and should not link git:// urls in general\n1896302 - [e2e][automation] Fix 4.6 test failures\n1896365 - [Migration]The SDN migration cannot revert under some conditions\n1896384 - [ovirt IPI]: local coredns resolution not working\n1896446 - Git clone from private repository fails after upgrade OCP 4.5 to 4.6\n1896529 - Incorrect instructions in the Serverless operator and application quick starts\n1896645 - documentationBaseURL needs to be updated for 4.7\n1896697 - [Descheduler] policy.yaml param in cluster configmap is empty\n1896704 - Machine API components should honour cluster wide proxy settings\n1896732 - \"Attach to Virtual Machine OS\" button should not be visible on old clusters\n1896866 - File /etc/NetworkManager/system-connections/default_connection.nmconnection  is incompatible with SR-IOV operator\n1896898 - ovs-configuration.service fails when multiple IPv6 default routes are provided via RAs over the same interface and deployment bootstrap fails\n1896918 - start creating new-style Secrets for AWS\n1896923 - DNS pod /metrics exposed on anonymous http port\n1896977 - route SimpleAllocationPlugin: host name validation errors: spec.host: Invalid value: ... must be no more than 63 characters\n1897003 - VNC console cannot be connected after visit it in new window\n1897008 - Cypress: reenable check for \u0027aria-hidden-focus\u0027 rule \u0026 checkA11y test for modals\n1897026 - [Migration] With updating optional network operator configuration, migration stucks on MCO\n1897039 - router pod keeps printing log: template \"msg\"=\"router reloaded\"  \"output\"=\"[WARNING] 316/065823 (15) : parsing [/var/lib/haproxy/conf/haproxy.config:52]: option \u0027http-use-htx\u0027 is deprecated and ignored\n1897050 - [IBM Power] LocalVolumeSet provisions boot partition as PV. \n1897073 - [OCP 4.5] wrong netid assigned to Openshift projects/namespaces\n1897138 - oVirt provider uses depricated cluster-api project\n1897142 - When scaling replicas to zero, Octavia loadbalancer pool members are not updated accordingly\n1897252 - Firing alerts are not showing up in console UI after cluster is up for some time\n1897354 - Operator installation showing success, but Provided APIs are missing\n1897361 - The MCO GCP-OP tests fail consistently on containerruntime tests with \"connection refused\"\n1897412 - [sriov]disableDrain did not be updated in CRD of manifest\n1897423 - Max unavailable and Max surge value are not shown on Deployment Config Details page\n1897516 - Baremetal IPI deployment with IPv6 control plane fails when the nodes obtain both SLAAC and DHCPv6 addresses as they set their hostname to \u0027localhost\u0027\n1897520 - After restarting nodes the image-registry co is in degraded true state. \n1897584 - Add casc plugins\n1897603 - Cinder volume attachment detection failure in Kubelet\n1897604 - Machine API deployment fails: Kube-Controller-Manager can\u0027t reach API: \"Unauthorized\"\n1897635 - CVE-2020-28362 golang: math/big: panic during recursive division of very large numbers\n1897641 - Baremetal IPI with IPv6 control plane: nodes respond with duplicate packets to ICMP6 echo requests\n1897676 - [CI] [Azure] [UPI] CI failing since 4.6 changes in ignition\n1897830 - [GSS] Unable to deploy OCS 4.5.2 on OCP 4.6.1, cannot `Create OCS Cluster Service`\n1897891 - [RFE][v2v][UI][CNV VM import] Providing error message or/and block migration when vddk-init-image is missing\n1897897 - ptp lose sync openshift 4.6\n1898036 - no network after reboot (IPI)\n1898045 - AWS EBS CSI Driver can not get updated cloud credential secret automatically\n1898097 - mDNS floods the baremetal network\n1898118 - Lack of logs on some image stream tests make hard to find root cause of a problem\n1898134 - Descheduler logs show absolute values instead of percentage when LowNodeUtilization strategy is applied\n1898159 - kcm operator shall pass --allocate-node-cidrs=false to kcm for ovn-kube and openshift-sdn cluster\n1898174 - [OVN] EgressIP does not guard against node IP assignment\n1898194 - GCP: can\u0027t install on custom machine types\n1898238 - Installer validations allow same floating IP for API and Ingress\n1898268 - [OVN]: `make check` broken on 4.6\n1898289 - E2E test: Use KUBEADM_PASSWORD_FILE by default\n1898320 - Incorrect Apostrophe  Translation of  \"it\u0027s\" in Scheduling Disabled Popover\n1898357 - Within the operatorhub details view, long unbroken text strings do not wrap cause breaking display. \n1898407 - [Deployment timing regression] Deployment takes longer with 4.7\n1898417 - GCP: the dns targets in Google Cloud DNS is not updated after recreating loadbalancer service\n1898487 - [oVirt] Node is not removed when VM has been removed from oVirt engine\n1898500 - Failure to upgrade operator when a Service is included in a Bundle\n1898517 - Ironic auto-discovery may result in rogue nodes registered in ironic\n1898532 - Display names defined in specDescriptors not respected\n1898580 - When adding more than one node selector to the sriovnetworknodepolicy, the cni and the device plugin pods are constantly rebooted\n1898613 - Whereabouts should exclude IPv6 ranges\n1898655 - [oVirt] Node deleted in oVirt should cause the Machine to go into a Failed phase\n1898679 - Operand creation form - Required \"type: object\" properties (Accordion component) are missing red asterisk\n1898680 - CVE-2020-7774 nodejs-y18n: prototype pollution vulnerability\n1898745 - installation failing with CVO reporting openshift-samples not rolled out, samples not setting versions in its ClusterOperator\n1898839 - Wrong YAML in operator metadata\n1898851 - Multiple Pods access the same volume on the same node e2e test cases are missed from aws ebs csi driver e2e test job\n1898873 - Remove TechPreview Badge from Monitoring\n1898954 - Backup script does not take /etc/kubernetes/static-pod-resources on a reliable way\n1899111 - [RFE] Update jenkins-maven-agen to maven36\n1899128 - VMI details screen -\u003e show the warning that it is preferable to have a VM only if the VM actually does not exist\n1899175 - bump the RHCOS boot images for 4.7\n1899198 - Use new packages for ipa ramdisks\n1899200 - In Installed Operators page I cannot search for an Operator by it\u0027s name\n1899220 - Support AWS IMDSv2\n1899350 - configure-ovs.sh doesn\u0027t configure bonding options\n1899433 - When Creating OCS from ocs wizard Step Discover Disks shows Error \"An error occurred Not Found\"\n1899459 - Failed to start monitoring pods once the operator removed from override list of CVO\n1899515 - Passthrough credentials are not immediately re-distributed on update\n1899575 - update discovery burst to reflect lots of CRDs on openshift clusters\n1899582 - update discovery burst to reflect lots of CRDs on openshift clusters\n1899588 - Operator objects are re-created after all other associated resources have been deleted\n1899600 - Increased etcd fsync latency as of OCP 4.6\n1899603 - workers-rhel7 CI jobs failing: Failed to remove rollback: error running rpm-ostree cleanup\n1899627 - Project dashboard Active status using small icon\n1899725 - Pods table does not wrap well with quick start sidebar open\n1899746 - [ovn] error while waiting on flows for pod: OVS sandbox port is no longer active (probably due to a subsequent CNI ADD)\n1899760 - etcd_request_duration_seconds_bucket metric has excessive cardinality\n1899835 - catalog-operator repeatedly crashes with \"runtime error: index out of range [0] with length 0\"\n1899839 - thanosRuler.resources.requests does not take effect in user-workload-monitoring-config confimap\n1899853 - additionalSecurityGroupIDs not working for master nodes\n1899922 - NP changes sometimes influence new pods. \n1899949 - [Platform] Remove restriction on disk type selection for LocalVolumeSet\n1900008 - Fix internationalized sentence fragments in ImageSearch.tsx\n1900010 - Fix internationalized sentence fragments in BuildImageSelector.tsx\n1900020 - Remove \u0026apos; from internationalized keys\n1900022 - Search Page - Top labels field is not applied to selected Pipeline resources\n1900030 - disruption_tests: [sig-imageregistry] Image registry remain available failing consistently\n1900126 - Creating a VM results in suggestion to create a default storage class when one already exists\n1900138 - [OCP on RHV] Remove insecure mode from the installer\n1900196 - stalld is not restarted after crash\n1900239 - Skip \"subPath should be able to unmount\" NFS test\n1900322 - metal3 pod\u0027s toleration for key: node-role.kubernetes.io/master currently matches on exact value matches but should match on Exists\n1900377 - [e2e][automation] create new css selector for active users\n1900496 - (release-4.7) Collect spec config for clusteroperator resources\n1900672 - (s390x) Upgrade from old LUKS to new not working with DASD disks\n1900699 - Impossible to add new Node on OCP 4.6 using large ECKD disks - fdasd issue\n1900759 - include qemu-guest-agent by default\n1900790 - Track all resource counts via telemetry\n1900835 - Multus errors when cachefile is not found\n1900935 - `oc adm release mirror` panic panic: runtime error\n1900989 - accessing the route cannot wake up the idled resources\n1901040 - When scaling down the status of the node is stuck on deleting\n1901057 - authentication operator health check failed when installing a cluster behind proxy\n1901107 - pod donut shows incorrect information\n1901111 - Installer dependencies are broken\n1901200 - linuxptp-daemon crash when enable debug log level\n1901301 - CBO should handle platform=BM without provisioning CR\n1901355 - [Azure][4.7] Invalid vm size from customized compute nodes does not fail properly\n1901363 - High Podready Latency due to timed out waiting for annotations\n1901373 - redundant bracket on snapshot restore button\n1901376 - [on-prem] Upgrade from 4.6 to 4.7 failed with \"timed out waiting for the condition during waitForControllerConfigToBeCompleted: controllerconfig is not completed: ControllerConfig has not completed: completed(false) running(false) failing(true\"\n1901395 - \"Edit virtual machine template\" action link should be removed\n1901472 - [OSP] Bootstrap and master nodes use different keepalived unicast setting\n1901517 - RHCOS 4.6.1 uses a single NetworkManager connection for multiple NICs when using default DHCP\n1901531 - Console returns a blank page while trying to create an operator Custom CR with Invalid Schema\n1901594 - Kubernetes resource CRUD operations.Kubernetes resource CRUD operations Pod \"before all\" hook for \"creates the resource instance\"\n1901604 - CNO blocks editing Kuryr options\n1901675 - [sig-network] multicast when using one of the plugins \u0027redhat/openshift-ovs-multitenant, redhat/openshift-ovs-networkpolicy\u0027 should allow multicast traffic in namespaces where it is enabled\n1901909 - The device plugin pods / cni pod are restarted every 5 minutes\n1901982 - [sig-builds][Feature:Builds] build can reference a cluster service  with a build being created from new-build should be able to run a build that references a cluster service\n1902019 - when podTopologySpreadConstraint strategy is enabled for descheduler it throws error\n1902059 - Wire a real signer for service accout issuer\n1902091 - `cluster-image-registry-operator` pod leaves connections open when fails connecting S3 storage\n1902111 - CVE-2020-27813 golang-github-gorilla-websocket: integer overflow leads to denial of service\n1902157 - The DaemonSet machine-api-termination-handler couldn\u0027t allocate Pod\n1902253 - MHC status doesnt set RemediationsAllowed = 0\n1902299 - Failed to mirror operator catalog - error: destination registry required\n1902545 - Cinder csi driver node pod should add nodeSelector for Linux\n1902546 - Cinder csi driver node pod doesn\u0027t run on master node\n1902547 - Cinder csi driver controller pod doesn\u0027t run on master node\n1902552 - Cinder csi driver does not use the downstream images\n1902595 - Project workloads list view doesn\u0027t show alert icon and hover message\n1902600 - Container csi-snapshotter in Cinder csi driver needs to use ImagePullPolicy=IfNotPresent\n1902601 - Cinder csi driver pods run as BestEffort qosClass\n1902653 - [BM][IPI] Master deployment failed: No valid host was found. Reason: No conductor service registered which supports driver redfish for conductor group\n1902702 - [sig-auth][Feature:LDAP][Serial] ldap group sync can sync groups from ldap: oc cp over non-existing directory/file fails\n1902746 - [BM][IP] Master deployment failed - Base.1.0.GeneralError: database is locked\n1902824 - failed to generate semver informed package manifest: unable to determine default channel\n1902894 - hybrid-overlay-node crashing trying to get node object during initialization\n1902969 - Cannot load vmi detail page\n1902981 - It should default to current namespace when create vm from template\n1902996 - [AWS] UPI on USGov, bootstrap machine can not fetch ignition file  via s3:// URI\n1903033 - duplicated lines of imageContentSources is seen when mirror release image to local registry\n1903034 - OLM continuously printing debug logs\n1903062 - [Cinder csi driver] Deployment mounted volume have no write access\n1903078 - Deleting VolumeSnapshotClass makes VolumeSnapshot not Ready\n1903107 - Enable vsphere-problem-detector e2e tests\n1903164 - OpenShift YAML editor jumps to top every few seconds\n1903165 - Improve Canary Status Condition handling for e2e tests\n1903172 - Column Management: Fix sticky footer on scroll\n1903186 - [Descheduler] cluster logs should report some info when PodTopologySpreadConstraints strategy is enabled\n1903188 - [Descheduler] cluster log reports failed to validate server configuration\" err=\"unsupported log format:\n1903192 - Role name missing on create role binding form\n1903196 - Popover positioning is misaligned for Overview Dashboard status items\n1903206 - Ingress controller incorrectly routes traffic to non-ready pods/backends. \n1903226 - MutatingWebhookConfiguration pod-identity-webhook does not exclude critical control-plane components\n1903248 - Backport Upstream Static Pod UID patch\n1903277 - Deprovisioning Not Deleting Security Groups [VpcLimitExceeded on e2e-aws tests]\n1903290 - Kubelet repeatedly log the same log line from exited containers\n1903346 - PV backed by FC lun is not being unmounted properly and this leads to IO errors / xfs corruption. \n1903382 - Panic when task-graph is canceled with a TaskNode with no tasks\n1903400 - Migrate a VM which is not running goes to pending state\n1903402 - Nic/Disk on VMI overview should link to VMI\u0027s nic/disk page\n1903414 - NodePort is not working when configuring an egress IP address\n1903424 - mapi_machine_phase_transition_seconds_sum doesn\u0027t work\n1903464 - \"Evaluating rule failed\" for \"record: cluster:kube_persistentvolumeclaim_resource_requests_storage_bytes:provisioner:sum\" and \"record: cluster:kubelet_volume_stats_used_bytes:provisioner:sum\"\n1903639 - Hostsubnet gatherer produces wrong output\n1903651 - Network Policies are not working as expected with OVN-Kubernetes when traffic hairpins back to the same source through a service\n1903660 - Cannot install with Assisted Installer on top of IPv6 since network provider is not started\n1903674 - [sig-apps] ReplicationController should serve a basic image on each replica with a private image\n1903717 - Handle different Pod selectors for metal3 Deployment\n1903733 - Scale up followed by scale down can delete all running workers\n1903917 - Failed to load \"Developer Catalog\" page\n1903999 - Httplog response code is always zero\n1904026 - The quota controllers should resync on new resources and make progress\n1904064 - Automated cleaning is disabled by default\n1904124 - DHCP to static lease script doesn\u0027t work correctly if starting with infinite leases\n1904125 - Boostrap VM .ign image gets added into \u0027default\u0027 pool instead of \u003ccluster-name\u003e-\u003cid\u003e-bootstrap\n1904131 - kuryr tempest plugin test test_ipblock_network_policy_sg_rules fails\n1904133 - KubeletConfig flooded with failure conditions\n1904161 - AlertmanagerReceiversNotConfigured fires unconditionally on alertmanager restart\n1904243 - RHCOS 4.6.1 missing ISCSI initiatorname.iscsi !\n1904244 - MissingKey errors for two plugins using i18next.t\n1904262 - clusterresourceoverride-operator has version: 1.0.0 every build\n1904296 - VPA-operator has version: 1.0.0 every build\n1904297 - The index image generated by \"opm index prune\" leaves unrelated images\n1904305 - Should have scroll-down bar for the field which the values list has too many results under dashboards\n1904385 - [oVirt] registry cannot mount volume on 4.6.4 -\u003e 4.6.6 upgrade\n1904497 - vsphere-problem-detector: Run on vSphere cloud only\n1904501 - [Descheduler] descheduler does not evict any pod when PodTopologySpreadConstraint strategy is set\n1904502 - vsphere-problem-detector: allow longer timeouts for some operations\n1904503 - vsphere-problem-detector: emit alerts\n1904538 - [sig-arch][Early] Managed cluster should start all core operators: monitoring: container has runAsNonRoot and image has non-numeric user (nobody)\n1904578 - metric scraping for vsphere problem detector is not configured\n1904582 - All application traffic broken due to unexpected load balancer change on 4.6.4 -\u003e 4.6.6 upgrade\n1904663 - IPI pointer customization MachineConfig always generated\n1904679 - [Feature:ImageInfo] Image info should display information about images\n1904683 - `[sig-builds][Feature:Builds] s2i build with a root user image` tests use docker.io image\n1904684 - [sig-cli] oc debug ensure it works with image streams\n1904713 - Helm charts with kubeVersion restriction are filtered incorrectly\n1904776 - Snapshot modal alert is not pluralized\n1904824 - Set vSphere hostname from guestinfo before NM starts\n1904941 - Insights status is always showing a loading icon\n1904973 - KeyError: \u0027nodeName\u0027 on NP deletion\n1904985 - Prometheus and thanos sidecar targets are down\n1904993 - Many ampersand special characters are found in strings\n1905066 - QE - Monitoring test cases - smoke test suite automation\n1905074 - QE -Gherkin linter to maintain standards\n1905100 - Too many haproxy processes in default-router pod causing high load average\n1905104 - Snapshot modal disk items missing keys\n1905115 - CI: dev-scripts fail on 02_configure_host: Failed to start network ostestbm\n1905119 - Race in AWS EBS determining whether custom CA bundle is used\n1905128 - [e2e][automation] e2e tests succeed without actually execute\n1905133 - operator conditions special-resource-operator\n1905141 - vsphere-problem-detector: report metrics through telemetry\n1905146 - Backend Tests: TestHelmRepoGetter_SkipDisabled failures\n1905194 - Detecting broken connections to the Kube API takes up to 15 minutes\n1905221 - CVO transitions from \"Initializing\" to \"Updating\" despite not attempting many manifests\n1905232 - [sig-imageregistry][Feature:ImageAppend] Image append should create images by appending them failing due to inconsistent images between CI and OCP\n1905253 - Inaccurate text at bottom of Events page\n1905298 - openshift-apiserver initContainer fix-audit-permissions is not requesting required resources: cpu, memory\n1905299 - OLM fails to update operator\n1905307 - Provisioning CR is missing from must-gather\n1905319 - cluster-samples-operator containers are not requesting required memory resource\n1905320 - csi-snapshot-webhook is not requesting required memory resource\n1905323 - dns-operator is not requesting required memory resource\n1905324 - ingress-operator is not requesting required memory resource\n1905327 - openshift-kube-scheduler initContainer wait-for-host-port is not requesting required resources: cpu, memory\n1905328 - Changing the bound token service account issuer invalids previously issued bound tokens\n1905329 - openshift-oauth-apiserver initContainer fix-audit-permissions is not requesting required resources: cpu, memory\n1905330 - openshift-monitoring init-textfile is not requesting required resources: cpu, memory\n1905338 - QE -Cypress Automation for Add Flow - Database, Yaml, OperatorBacked, PageDetails\n1905347 - QE - Design Gherkin Scenarios\n1905348 - QE - Design Gherkin Scenarios\n1905362 - [sriov] Error message \u0027Fail to update DaemonSet\u0027 always shown in sriov operator pod\n1905368 - [sriov] net-attach-def generated from sriovnetwork cannot be restored once it was deleted\n1905370 - A-Z/Z-A sorting dropdown on Developer Catalog page is not aligned with filter text input\n1905380 - Default to Red Hat/KubeVirt provider if common template does not have provider annotation\n1905393 - CMO uses rbac.authorization.k8s.io/v1beta1 instead of rbac.authorization.k8s.io/v1\n1905404 - The example of \"Remove the entrypoint on the mysql:latest image\" for `oc image append` does not work\n1905416 - Hyperlink not working from Operator Description\n1905430 - usbguard extension fails to install because of missing correct protobuf dependency version\n1905492 - The stalld service has a higher scheduler priority than ksoftirq and rcu{b, c} threads\n1905502 - Test flake - unable to get https transport for ephemeral-registry\n1905542 - [GSS] The \"External\" mode option is not available when the OCP cluster is deployed using Redhat Cluster Assisted Installer 4.6. \n1905599 - Errant change to lastupdatetime in copied CSV status can trigger runaway csv syncs\n1905610 - Fix typo in export script\n1905621 - Protractor login test fails against a 4.7 (nightly) Power cluster\n1905640 - Subscription manual approval test is flaky\n1905647 - Report physical core valid-for-subscription min/max/cumulative use to telemetry\n1905696 - ClusterMoreUpdatesModal component did not get internationalized\n1905748 - with sharded ingresscontrollers, all shards reload when any endpoint changes\n1905761 - NetworkPolicy with Egress policyType is resulting in SDN errors and improper communication within Project\n1905778 - inconsistent ingresscontroller between fresh installed cluster and upgraded cluster\n1905792 - [OVN]Cannot create egressfirewalll with dnsName\n1905889 - Should create SA for each namespace that the operator scoped\n1905920 - Quickstart exit and restart\n1905941 - Page goes to error after create catalogsource\n1905977 - QE ghaekin design scenaio-pipeline metrics ODC-3711\n1906032 - Canary Controller: Canary daemonset rolls out slowly in large clusters\n1906100 - Disconnected cluster upgrades are failing from the cli, when signature retrieval is being blackholed instead of quickly rejected\n1906105 - CBO annotates an existing Metal3 deployment resource to indicate that it is managing it\n1906118 - OCS feature detection constantly polls storageclusters and storageclasses\n1906120 - \u0027Create Role Binding\u0027 form not setting user or group value when created from a user or group resource\n1906121 - [oc] After new-project creation, the kubeconfig file does not set the project\n1906134 - OLM should not create OperatorConditions for copied CSVs\n1906143 - CBO supports log levels\n1906186 - i18n: Translators are not able to translate `this` without context for alert manager config\n1906228 - tuned and openshift-tuned sometimes do not terminate gracefully, slowing reboots\n1906274 - StorageClass installed by Cinder csi driver operator should enable the allowVolumeExpansion to support volume resize. \n1906276 - `oc image append` can\u0027t work with multi-arch image with  --filter-by-os=\u0027.*\u0027\n1906318 - use proper term for Authorized SSH Keys\n1906335 - The lastTransitionTime, message, reason field of operatorcondition should be optional\n1906356 - Unify Clone PVC boot source flow with URL/Container boot source\n1906397 - IPA has incorrect kernel command line arguments\n1906441 - HorizontalNav and NavBar have invalid keys\n1906448 - Deploy using virtualmedia with provisioning network disabled fails - \u0027Failed to connect to the agent\u0027 in ironic-conductor log\n1906459 - openstack: Quota Validation fails if unlimited quotas are given to a project\n1906496 - [BUG] Thanos having possible memory leak consuming huge amounts of node\u0027s memory and killing them\n1906508 - TestHeaderNameCaseAdjust outputs nil error message on some failures\n1906511 - Root reprovisioning tests flaking often in CI\n1906517 - Validation is not robust enough and may prevent to generate install-confing. \n1906518 - Update snapshot API CRDs to v1\n1906519 - Update LSO CRDs to use v1\n1906570 - Number of disruptions caused by reboots on a cluster cannot be measured\n1906588 - [ci][sig-builds] nodes is forbidden: User \"e2e-test-jenkins-pipeline-xfghs-user\" cannot list resource \"nodes\" in API group \"\" at the cluster scope\n1906650 - Cannot collect network policy, EgressFirewall, egressip logs with gather_network_logs\n1906655 - [SDN]Cannot colloect ovsdb-server.log and ovs-vswitchd.log with gather_network_logs\n1906679 - quick start panel styles are not loaded\n1906683 - Kn resources are not showing in Topology if triggers has KSVC and IMC as subscriber\n1906684 - Event Source creation fails if user selects no app group and switch to yaml and then to form\n1906685 - SinkBinding is shown in topology view if underlying resource along with actual source created\n1906689 - user can pin to nav configmaps and secrets multiple times\n1906691 - Add doc which describes disabling helm chart repository\n1906713 - Quick starts not accesible for a developer user\n1906718 - helm chart \"provided by Redhat\" is misspelled\n1906732 - Machine API proxy support should be tested\n1906745 - Update Helm endpoints to use Helm 3.4.x\n1906760 - performance issues with topology constantly re-rendering\n1906766 - localized `Autoscaled` \u0026 `Autoscaling` pod texts overlap with the pod ring\n1906768 - Virtualization nav item is incorrectly placed in the Admin Workloads section\n1906769 - topology fails to load with non-kubeadmin user\n1906770 - shortcuts on mobiles view occupies a lot of space\n1906798 - Dev catalog customization doesn\u0027t update console-config ConfigMap\n1906806 - Allow installing extra packages in ironic container images\n1906808 - [test-disabled] ServiceAccounts should support OIDC discovery of service account issuer\n1906835 - Topology view shows add page before then showing full project workloads\n1906840 - ClusterOperator should not have status \"Updating\" if operator version is the same as the release version\n1906844 - EndpointSlice and EndpointSliceProxying feature gates should be disabled for openshift-sdn kube-proxy\n1906860 - Bump kube dependencies to v1.20 for Net Edge components\n1906864 - Quick Starts Tour: Need to adjust vertical spacing\n1906866 - Translations of Sample-Utils\n1906871 - White screen when sort by name in monitoring alerts page\n1906872 - Pipeline Tech Preview Badge Alignment\n1906875 - Provide an option to force backup even when API is not available. \n1906877 - Placeholder\u0027 value in search filter do not match column heading in Vulnerabilities\n1906879 - Add missing i18n keys\n1906880 - oidcdiscoveryendpoint controller invalidates all TokenRequest API tokens during install\n1906896 - No Alerts causes odd empty Table (Need no content message)\n1906898 - Missing User RoleBindings in the Project Access Web UI\n1906899 - Quick Start - Highlight Bounding Box Issue\n1906916 - Teach CVO about flowcontrol.apiserver.k8s.io/v1beta1\n1906933 - Cluster Autoscaler should have improved mechanisms for group identifiers\n1906935 - Delete resources when Provisioning CR is deleted\n1906968 - Must-gather should support collecting kubernetes-nmstate resources\n1906986 - Ensure failed pod adds are retried even if the pod object doesn\u0027t change\n1907199 - Need to upgrade machine-api-operator module version under cluster-api-provider-kubevirt\n1907202 - configs.imageregistry.operator.openshift.io cluster does not update its status fields after URL change\n1907211 - beta promotion of p\u0026f switched storage version to v1beta1, making downgrades impossible. \n1907269 - Tooltips data are different when checking stack or not checking stack for the same time\n1907280 - Install tour of OCS not available. \n1907282 - Topology page breaks with white screen\n1907286 - The default mhc machine-api-termination-handler couldn\u0027t watch spot instance\n1907287 - [csi-snapshot-webhook] should support both v1beta1 and v1 version when creating volumesnapshot/volumesnapshotcontent\n1907293 - Increase timeouts in e2e tests\n1907295 - Gherkin script for improve management for helm\n1907299 - Advanced Subscription Badge for KMS and Arbiter not present\n1907303 - Align VM template list items by baseline\n1907304 - Use PF styles for selected template card in VM Wizard\n1907305 - Drop \u0027ISO\u0027 from CDROM boot source message\n1907307 - Support and provider labels should be passed on between templates and sources\n1907310 - Pin action should be renamed to favorite\n1907312 - VM Template source popover is missing info about added date\n1907313 - ClusterOperator objects cannot be overriden with cvo-overrides\n1907328 - iproute-tc package is missing in ovn-kube image\n1907329 - CLUSTER_PROFILE env. variable is not used by the CVO\n1907333 - Node stuck in degraded state, mcp reports \"Failed to remove rollback: error running rpm-ostree cleanup -r: error: Timeout was reached\"\n1907373 - Rebase to kube 1.20.0\n1907375 - Bump to latest available 1.20.x k8s - workloads team\n1907378 - Gather netnamespaces networking info\n1907380 - kube-rbac-proxy exposes tokens, has excessive verbosity\n1907381 - OLM fails to deploy an operator if its deployment template contains a description annotation that doesn\u0027t match the CSV one\n1907390 - prometheus-adapter: panic after k8s 1.20 bump\n1907399 - build log icon link on topology nodes cause app to reload\n1907407 - Buildah version not accessible\n1907421 - [4.6.1]oc-image-mirror command failed on \"error: unable to copy layer\"\n1907453 - Dev Perspective -\u003e running vm details -\u003e resources -\u003e no data\n1907454 - Install PodConnectivityCheck CRD with CNO\n1907459 - \"The Boot source is also maintained by Red Hat.\" is always shown for all boot sources\n1907475 - Unable to estimate the error rate of ingress across the connected fleet\n1907480 - `Active alerts` section throwing forbidden error for users. \n1907518 - Kamelets/Eventsource should be shown to user if they have create access\n1907543 - Korean timestamps are shown when users\u0027 language preferences are set to German-en-en-US\n1907610 - Update kubernetes deps to 1.20\n1907612 - Update kubernetes deps to 1.20\n1907621 - openshift/installer: bump cluster-api-provider-kubevirt version\n1907628 - Installer does not set primary subnet consistently\n1907632 - Operator Registry should update its kubernetes dependencies to 1.20\n1907639 - pass dual-stack node IPs to kubelet in dual-stack clusters\n1907644 - fix up handling of non-critical annotations on daemonsets/deployments\n1907660 - Pod list does not render cell height correctly when pod names are too long (dynamic table rerendering issue?)\n1907670 - CVE-2020-27846 crewjam/saml: authentication bypass in saml authentication\n1907671 - Ingress VIP assigned to two infra nodes simultaneously - keepalived process running in pods seems to fail\n1907767 - [e2e][automation]update test suite for kubevirt plugin\n1907770 - Recent RHCOS 47.83 builds (from rhcos-47.83.202012072210-0 on) don\u0027t allow master and worker nodes to boot\n1907792 - The `overrides` of the OperatorCondition cannot block the operator upgrade\n1907793 - Surface support info in VM template details\n1907812 - 4.7 to 4.6 downgrade stuck in clusteroperator storage\n1907822 - [OCP on OSP] openshift-install panic when checking quota with install-config have no flavor set\n1907863 - Quickstarts status not updating when starting the tour\n1907872 - dual stack with an ipv6 network fails on bootstrap phase\n1907874 - QE - Design Gherkin Scenarios for epic ODC-5057\n1907875 - No response when try to expand pvc with an invalid size\n1907876 - Refactoring record package to make gatherer configurable\n1907877 - QE - Automation- pipelines builder scripts\n1907883 - Fix Pipleine creation without namespace issue\n1907888 - Fix pipeline list page loader\n1907890 - Misleading and incomplete alert message shown in pipeline-parameters and pipeline-resources form\n1907892 - Unable to edit application deployed using \"From Devfile\" option\n1907893 - navSortUtils.spec.ts unit test failure\n1907896 - When a workload is added, Topology does not place the new items well\n1907908 - VM Wizard always uses VirtIO for the VM rootdisk regardless what is defined in common-template\n1907924 - Enable madvdontneed in OpenShift Images\n1907929 - Enable madvdontneed in OpenShift System Components Part 2\n1907936 - NTO is not reporting nto_profile_set_total metrics correctly after reboot\n1907947 - The kubeconfig saved in tenantcluster shouldn\u0027t include anything that is not related to the current context\n1907948 - OCM-O bump to k8s 1.20\n1907952 - bump to k8s 1.20\n1907972 - Update OCM link to open Insights tab\n1907989 - DataVolumes was intorduced in common templates - VM creation fails in the UI\n1907998 - Gather kube_pod_resource_request/limit metrics as exposed in upstream KEP 1916\n1908001 - [CVE-2020-10749] Update github.com/containernetworking/plugins to v.0.8.6 in egress-router-cni\n1908014 - e2e-aws-ansible and e2e-aws-helm are broken in ocp-release-operator-sdk\n1908035 - dynamic-demo-plugin build does not generate dist directory\n1908135 - quick search modal is not centered over topology\n1908145 - kube-scheduler-recovery-controller container crash loop when router pod is co-scheduled\n1908159 - [AWS C2S] MCO fails to sync cloud config\n1908171 - GCP: Installation fails when installing cluster with n1-custom-4-16384custom type (n1-custom-4-16384)\n1908180 - Add source for template is stucking in preparing pvc\n1908217 - CI: Server-Side Apply should work for oauth.openshift.io/v1: has no tokens\n1908231 - [Migration] The pods ovnkube-node are in  CrashLoopBackOff after SDN to OVN\n1908277 - QE - Automation- pipelines actions scripts\n1908280 - Documentation describing `ignore-volume-az` is incorrect\n1908296 - Fix pipeline builder form yaml switcher validation issue\n1908303 - [CVE-2020-28367 CVE-2020-28366] Remove CGO flag from rhel Dockerfile in Egress-Router-CNI\n1908323 - Create button missing for PLR in the search page\n1908342 - The new pv_collector_total_pv_count is not reported via telemetry\n1908344 - [vsphere-problem-detector] CheckNodeProviderID and CheckNodeDiskUUID have the same name\n1908347 - CVO overwrites ValidatingWebhookConfiguration for snapshots\n1908349 - Volume snapshot tests are failing after 1.20 rebase\n1908353 - QE - Automation- pipelines runs scripts\n1908361 - bump to k8s 1.20\n1908367 - QE - Automation- pipelines triggers scripts\n1908370 - QE - Automation- pipelines secrets scripts\n1908375 - QE - Automation- pipelines workspaces scripts\n1908381 - Go Dependency Fixes for Devfile Lib\n1908389 - Loadbalancer Sync failing on Azure\n1908400 - Tests-e2e, increase timeouts, re-add TestArchiveUploadedAndResultsReceived\n1908407 - Backport Upstream 95269 to fix potential crash in kubelet\n1908410 - Exclude Yarn from VSCode search\n1908425 - Create Role Binding form subject type and name are undefined when All Project is selected\n1908431 - When the marketplace-operator pod get\u0027s restarted, the custom catalogsources are gone, as well as the pods\n1908434 - Remove \u0026apos from metal3-plugin internationalized strings\n1908437 - Operator backed with no icon has no badge associated with the CSV tag\n1908459 - bump to k8s 1.20\n1908461 - Add bugzilla component to OWNERS file\n1908462 - RHCOS 4.6 ostree removed dhclient\n1908466 - CAPO AZ Screening/Validating\n1908467 - Zoom in and zoom out in topology package should be sentence case\n1908468 - [Azure][4.7] Installer can\u0027t properly parse instance type with non integer memory size\n1908469 - nbdb failed to come up while bringing up OVNKubernetes cluster\n1908471 - OLM should bump k8s dependencies to 1.20\n1908484 - oc adm release extract --cloud=aws --credentials-requests dumps all manifests\n1908493 - 4.7-e2e-metal-ipi-ovn-dualstack intermittent test failures, worker hostname is overwritten by NM\n1908545 - VM clone dialog does not open\n1908557 - [e2e][automation]Miss css id on bootsource and reviewcreate step on wizard\n1908562 - Pod readiness is not being observed in real world cases\n1908565 - [4.6] Cannot filter the platform/arch of the index image\n1908573 - Align the style of flavor\n1908583 - bootstrap does not run on additional networks if configured for master in install-config\n1908596 - Race condition on operator installation\n1908598 - Persistent Dashboard shows events for all provisioners\n1908641 - Go back to Catalog Page link on Virtual Machine page vanishes on empty state\n1908648 - Skip TestKernelType test on OKD, adjust TestExtensions\n1908650 - The title of customize wizard is inconsistent\n1908654 - cluster-api-provider: volumes and disks names shouldn\u0027t change by machine-api-operator\n1908675 - Reenable [sig-storage] CSI mock volume CSI FSGroupPolicy [LinuxOnly] should modify fsGroup if fsGroupPolicy=default [Suite:openshift/conformance/parallel] [Suite:k8s]\n1908687 - Option to save user settings separate when using local bridge (affects console developers only)\n1908697 - Show `kubectl diff ` command in the oc diff help page\n1908715 - Pressing the arrow up key when on topmost quick-search list item it should loop back to bottom\n1908716 - UI breaks on click of sidebar of ksvc (if revisions not up) in topology on 4.7 builds\n1908717 - \"missing unit character in duration\" error in some network dashboards\n1908746 - [Safari] Drop Shadow doesn\u0027t works as expected on hover on workload\n1908747 - stale S3 CredentialsRequest in CCO manifest\n1908758 - AWS: NLB timeout value is rejected by AWS cloud provider after 1.20 rebase\n1908830 - RHCOS 4.6 - Missing Initiatorname\n1908868 - Update empty state message for EventSources and Channels tab\n1908880 - 4.7 aws-serial CI: NoExecuteTaintManager Single Pod [Serial] eventually evict pod with finite tolerations from tainted nodes\n1908883 - CVE-2020-29652 golang: crypto/ssh: crafted authentication request can lead to nil pointer dereference\n1908888 - Dualstack does not work with multiple gateways\n1908889 - Bump CNO to k8s 1.20\n1908891 - TestDNSForwarding DNS operator e2e test is failing frequently\n1908914 - CNO: upgrade nodes before masters\n1908918 - Pipeline builder yaml view sidebar is not responsive\n1908960 - QE - Design Gherkin Scenarios\n1908971 - Gherkin Script for pipeline debt 4.7\n1908983 - i18n: Add Horizontal Pod Autoscaler action menu is not translated\n1908997 - Unsupported access mode should not be available when creating pvc by cinder-csi-driver/gcp-pd-csi-driver from web-console\n1908998 - [cinder-csi-driver] doesn\u0027t detect the credentials change\n1909004 - \"No datapoints found\" for RHEL node\u0027s filesystem graph\n1909005 - i18n: workloads list view heading is not translated\n1909012 - csi snapshot webhook does not block any invalid update for volumesnapshot and volumesnapshotcontent objects\n1909027 - Disks option of Sectected capacity chart shows HDD disk even on selection of SDD disk type\n1909043 - OCP + OCS 4.7 Internal - Storage cluster creation throws warning when zone=0 in VMware\n1909067 - Web terminal should keep latest output when connection closes\n1909070 - PLR and TR Logs component is not streaming as fast as tkn\n1909092 - Error Message should not confuse user on Channel form\n1909096 - OCP 4.7+OCS 4.7 - The Requested Cluster Capacity field needs to include the selected capacity in calculation in Review and Create Page\n1909108 - Machine API components should use 1.20 dependencies\n1909116 - Catalog Sort Items dropdown is not aligned on Firefox\n1909198 - Move Sink action option is not working\n1909207 - Accessibility Issue on monitoring page\n1909236 - Remove pinned icon overlap on resource name\n1909249 - Intermittent packet drop from pod to pod\n1909276 - Accessibility Issue on create project modal\n1909289 - oc debug of an init container no longer works\n1909290 - Logging may be broken due to mix of k8s.io/klog v1 and v2\n1909358 - registry.redhat.io/redhat/community-operator-index:latest only have hyperfoil-bundle\n1909453 - Boot disk RAID can corrupt ESP if UEFI firmware writes to it\n1909455 - Boot disk RAID will not boot if the primary disk enumerates but fails I/O\n1909464 - Build operator-registry with golang-1.15\n1909502 - NO_PROXY is not matched between bootstrap and global cluster setting which lead to desired master machineconfig is not found\n1909521 - Add kubevirt cluster type for e2e-test workflow\n1909527 - [IPI Baremetal] After upgrade from 4.6 to 4.7 metal3 pod does not get created\n1909587 - [OCP4] all of the OCP master nodes with soft-anti-affinity run on the same OSP node\n1909610 - Fix available capacity when no storage class selected\n1909678 - scale up / down buttons available on pod details side panel\n1909723 - cluster-api-provider-openstack: Update ose-openstack-machine-controllers builder \u0026 base images to be consistent with ART\n1909730 - unbound variable error if EXTRA_PKGS_LIST is not defined\n1909739 - Arbiter request data changes\n1909744 - cluster-api-provider-openstack: Bump gophercloud\n1909790 - PipelineBuilder yaml view cannot be used for editing a pipeline\n1909791 - Update standalone kube-proxy config for EndpointSlice\n1909792 - Empty states for some details page subcomponents are not i18ned\n1909815 - Perspective switcher is only half-i18ned\n1909821 - OCS 4.7 LSO installation blocked because of Error \"Invalid value: \"integer\": spec.flexibleScaling in body\n1909836 - operator-install-global Cypress test was failing in OLM as it depends on an operator that isn\u0027t installed in CI\n1909864 - promote-release-openshift-machine-os-content-e2e-aws-4.5 is perm failing\n1909911 - [OVN]EgressFirewall caused a segfault\n1909943 - Upgrade from 4.6 to 4.7 stuck due to write /sys/devices/xxxx/block/sda/queue/scheduler: invalid argument\n1909958 - Support Quick Start Highlights Properly\n1909978 - ignore-volume-az = yes not working on standard storageClass\n1909981 - Improve statement in template select step\n1909992 - Fail to pull the bundle image when using the private index image\n1910024 - Reload issue in latest(4.7) UI code on 4.6 cluster locally in dev\n1910036 - QE - Design Gherkin Scenarios ODC-4504\n1910049 - UPI: ansible-galaxy is not supported\n1910127 - [UPI on oVirt]:  Improve UPI Documentation\n1910140 - fix the api dashboard with changes in upstream kube 1.20\n1910160 - If two OperatorConditions include the same deployments they will keep updating the deployment\u0027s containers with the OPERATOR_CONDITION_NAME Environment Variable\n1910165 - DHCP to static lease script doesn\u0027t handle multiple addresses\n1910305 - [Descheduler] - The minKubeVersion should be 1.20.0\n1910409 - Notification drawer is not localized for i18n\n1910459 - Could not provision gcp volume if delete secret gcp-pd-cloud-credentials\n1910492 - KMS details are auto-populated on the screen in next attempt at Storage cluster creation\n1910501 - Installed Operators-\u003eOperand required: Clicking on cancel in Storage cluster page takes back to the Install Operator page\n1910533 - [OVN] It takes about 5 minutes for EgressIP failover to work\n1910581 - library-go: proxy ENV is not injected into csi-driver-controller which lead to storage operator never get ready\n1910666 - Creating a Source Secret from type SSH-Key should use monospace font for better usability\n1910738 - OCP 4.7 Installation fails on VMWare due to 1 worker that is degraded\n1910739 - Redfish-virtualmedia (idrac) deploy fails on \"The Virtual Media image server is already connected\"\n1910753 - Support Directory Path to Devfile\n1910805 - Missing translation for Pipeline status and breadcrumb text\n1910829 - Cannot delete a PVC if the dv\u0027s phase is WaitForFirstConsumer\n1910840 - Show Nonexistent  command info in the `oc rollback -h` help page\n1910859 - breadcrumbs doesn\u0027t use last namespace\n1910866 - Unify templates string\n1910870 - Unify template dropdown action\n1911016 - Prometheus unable to mount NFS volumes after upgrading to 4.6\n1911129 - Monitoring charts renders nothing when switching from a Deployment to \"All workloads\"\n1911176 - [MSTR-998] Wrong text shown when hovering on lines of charts in API Performance dashboard\n1911212 - [MSTR-998] API Performance Dashboard \"Period\" drop-down has a choice \"$__auto_interval_period\" which can bring \"1:154: parse error: missing unit character in duration\"\n1911213 - Wrong and misleading warning for VMs that were created manually (not from template)\n1911257 - [aws-c2s] failed to create cluster, kube-cloud-config was not created\n1911269 - waiting for the build message present when build exists\n1911280 - Builder images are not detected for Dotnet, Httpd, NGINX\n1911307 - Pod Scale-up requires extra privileges in OpenShift web-console\n1911381 - \"Select Persistent Volume Claim project\" shows in customize wizard when select a source available template\n1911382 - \"source volumeMode (Block) and target volumeMode (Filesystem) do not match\" shows in VM Error\n1911387 - Hit error - \"Cannot read property \u0027value\u0027 of undefined\" while creating VM from template\n1911408 - [e2e][automation] Add auto-clone cli tests and new flow of VM creation\n1911418 - [v2v] The target storage class name is not displayed if default storage class is used\n1911434 - git ops empty state page displays icon with watermark\n1911443 - SSH Cretifiaction field should be validated\n1911465 - IOPS display wrong unit\n1911474 - Devfile Application Group Does Not Delete Cleanly (errors)\n1911487 - Pruning Deployments should use ReplicaSets instead of ReplicationController\n1911574 - Expose volume mode  on Upload Data form\n1911617 - [CNV][UI] Failure to add source to VM template when no default storage class is defined\n1911632 - rpm-ostree command fail due to wrong options when updating ocp-4.6 to 4.7 on worker nodes with rt-kernel\n1911656 - using \u0027operator-sdk run bundle\u0027 to install operator successfully, but the command output said \u0027Failed to run bundle\u0027\u0027\n1911664 - [Negative Test] After deleting metal3 pod, scaling worker stuck on provisioning state\n1911782 - Descheduler should not evict pod used local storage by the PVC\n1911796 - uploading flow being displayed before submitting the form\n1912066 - The ansible type operator\u0027s manager container is not stable when managing the CR\n1912077 - helm operator\u0027s default rbac forbidden\n1912115 - [automation] Analyze job keep failing because of \u0027JavaScript heap out of memory\u0027\n1912237 - Rebase CSI sidecars for 4.7\n1912381 - [e2e][automation] Miss css ID on Create Network Attachment Definition page\n1912409 - Fix flow schema deployment\n1912434 - Update guided tour modal title\n1912522 - DNS Operator e2e test: TestCoreDNSImageUpgrade is fundamentally broken\n1912523 - Standalone pod status not updating in topology graph\n1912536 - Console Plugin CR for console-demo-plugin has wrong apiVersion\n1912558 - TaskRun list and detail screen doesn\u0027t show Pending status\n1912563 - p\u0026f: carry 97206: clean up executing request on panic\n1912565 - OLM macOS local build broken by moby/term dependency\n1912567 - [OCP on RHV] Node becomes to \u0027NotReady\u0027 status when shutdown vm from RHV UI only on the second deletion\n1912577 - 4.1/4.2-\u003e4.3-\u003e...-\u003e 4.7 upgrade is stuck during 4.6-\u003e4.7 with co/openshift-apiserver Degraded, co/network not Available and several other components pods CrashLoopBackOff\n1912590 - publicImageRepository not being populated\n1912640 - Go operator\u0027s controller pods is forbidden\n1912701 - Handle dual-stack configuration for NIC IP\n1912703 - multiple queries can\u0027t be plotted in the same graph under some conditons\n1912730 - Operator backed: In-context should support visual connector if SBO is not installed\n1912828 - Align High Performance VMs with High Performance in RHV-UI\n1912849 - VM from wizard - default flavor does not match the actual flavor set by common templates\n1912852 - VM from wizard - available VM templates - \"storage\" field is \"0 B\"\n1912888 - recycler template should be moved to KCM operator\n1912907 - Helm chart repository index can contain unresolvable relative URL\u0027s\n1912916 - Set external traffic policy to cluster for IBM platform\n1912922 - Explicitly specifying the operator generated default certificate for an ingress controller breaks the ingress controller\n1912938 - Update confirmation modal for quick starts\n1912942 - cluster-storage-operator: proxy ENV is not injected into vsphere-problem-detector deployment\n1912944 - cluster-storage-operator: proxy ENV is not injected into Manila CSI driver operator deployment\n1912945 - aws-ebs-csi-driver-operator: proxy ENV is not injected into the CSI driver\n1912946 - gcp-pd-csi-driver-operator: proxy ENV is not injected into the CSI driver\n1912947 - openstack-cinder-csi-driver-operator: proxy ENV is not injected into the CSI driver\n1912948 - csi-driver-manila-operator: proxy ENV is not injected into the CSI driver\n1912949 - ovirt-csi-driver-operator: proxy ENV is not injected into the CSI driver\n1912977 - rebase upstream static-provisioner\n1913006 - Remove etcd v2 specific alerts with etcd_http* metrics\n1913011 - [OVN] Pod\u0027s external traffic not use egressrouter macvlan ip as a source ip\n1913037 - update static-provisioner base image\n1913047 - baremetal clusteroperator progressing status toggles between true and false when cluster is in a steady state\n1913085 - Regression OLM uses scoped client for CRD installation\n1913096 - backport: cadvisor machine metrics are missing in k8s 1.19\n1913132 - The installation of Openshift Virtualization reports success early before it \u0027s succeeded eventually\n1913154 - Upgrading to 4.6.10 nightly failed with RHEL worker nodes: Failed to find /dev/disk/by-label/root\n1913196 - Guided Tour doesn\u0027t handle resizing of browser\n1913209 - Support modal should be shown for community supported templates\n1913226 - [Migration] The SDN migration rollback failed if customize vxlanPort\n1913249 - update info alert this template is not aditable\n1913285 - VM list empty state should link to virtualization quick starts\n1913289 - Rebase AWS EBS CSI driver for 4.7\n1913292 - OCS 4.7 Installation failed over vmware when arbiter was enabled, as flexibleScaling is also getting enabled\n1913297 - Remove restriction of taints for arbiter node\n1913306 - unnecessary scroll bar is present on quick starts panel\n1913325 - 1.20 rebase for openshift-apiserver\n1913331 - Import from git: Fails to detect Java builder\n1913332 - Pipeline visualization breaks the UI when multiple taskspecs are used\n1913343 - (release-4.7) Added changelog file for insights-operator\n1913356 - (release-4.7) Implemented gathering specific logs from openshift apiserver operator\n1913371 - Missing i18n key \"Administrator\" in namespace \"console-app\" and language \"en.\"\n1913386 - users can see metrics of namespaces for which they don\u0027t have rights when monitoring own services with prometheus user workloads\n1913420 - Time duration setting of resources is not being displayed\n1913536 - 4.6.9 -\u003e 4.7 upgrade hangs.  RHEL 7.9 worker stuck on \"error enabling unit: Failed to execute operation: File exists\\\\n\\\"\n1913554 - Recording rule for ingress error fraction SLI is incorrect, uses irate instead of increase\n1913560 - Normal user cannot load template on the new wizard\n1913563 - \"Virtual Machine\" is not on the same line in create button when logged with normal user\n1913567 - Tooltip data should be same for line chart or stacked chart, display data value same as the table\n1913568 - Normal user cannot create template\n1913582 - [Migration]SDN to OVN migration stucks on MCO for rhel worker\n1913585 - Topology descriptive text fixes\n1913608 - Table data contains data value None after change time range in graph and change back\n1913651 - Improved Red Hat image and crashlooping OpenShift pod collection\n1913660 - Change location and text of Pipeline edit flow alert\n1913685 - OS field not disabled when creating a VM from a template\n1913716 - Include additional use of existing libraries\n1913725 - Refactor Insights Operator Plugin states\n1913736 - Regression: fails to deploy computes when using root volumes\n1913747 - Update operator to kubernetes 1.20.1 to pickup upstream fixes\n1913751 - add third-party network plugin test suite to openshift-tests\n1913783 - QE-To fix the merging pr issue, commenting the afterEach() block\n1913807 - Template support badge should not be shown for community supported templates\n1913821 - Need definitive steps about uninstalling descheduler operator\n1913851 - Cluster Tasks are not sorted in pipeline builder\n1913864 - BuildConfig YAML template references ruby ImageStreamTag that no longer exists\n1913951 - Update the Devfile Sample Repo to an Official Repo Host\n1913960 - Cluster Autoscaler should use 1.20 dependencies\n1913969 - Field dependency descriptor can sometimes cause an exception\n1914060 - Disk created from \u0027Import via Registry\u0027 cannot be used as boot disk\n1914066 - [sriov] sriov dp pod crash when delete ovs HW offload policy\n1914090 - Grafana - The resulting dataset is too large to graph (OCS RBD volumes being counted as disks)\n1914119 - vsphere problem detector operator has no permission to update storages.operator.openshift.io instances\n1914125 - Still using /dev/vde as default device path when create localvolume\n1914183 - Empty NAD page is missing link to quickstarts\n1914196 - target port in `from dockerfile` flow does nothing\n1914204 - Creating VM from dev perspective may fail with template not found error\n1914209 - Associate image secret name to pipeline serviceaccount imagePullSecrets\n1914212 - [e2e][automation] Add test to validate bootable disk souce\n1914250 - ovnkube-node fails on master nodes when both DHCPv6 and SLAAC addresses are configured on nodes\n1914284 - Upgrade to OCP 4.6.9 results in cluster-wide DNS and connectivity issues due to bad NetworkPolicy flows\n1914287 - Bring back selfLink\n1914301 - User VM Template source should show the same provider as template itself\n1914303 - linuxptp-daemon is not forwarding ptp4l stderr output to openshift logs\n1914309 - /terminal page when WTO not installed shows nonsensical error\n1914334 - order of getting started samples is arbitrary\n1914343 - [sig-imageregistry][Feature:ImageTriggers] Annotation trigger reconciles after the image is overwritten [Suite:openshift/conformance/parallel]  timeout on s390x\n1914349 - Increase and decrease buttons in max and min pods in HPA page has distorted UI\n1914405 - Quick search modal should be opened when coming back from a selection\n1914407 - Its not clear that node-ca is running as non-root\n1914427 - Count of pods on the dashboard is incorrect\n1914439 - Typo in SRIOV port create command example\n1914451 - cluster-storage-operator pod running as root\n1914452 - oc image append, oc image extract outputs wrong suggestion to use --keep-manifest-list=true\n1914642 - Customize Wizard Storage tab does not pass validation\n1914723 - SamplesTBRInaccessibleOnBoot Alert has a misspelling\n1914793 - device names should not be translated\n1914894 - Warn about using non-groupified api version\n1914926 - webdriver-manager pulls incorrect version of ChomeDriver due to a bug\n1914932 - Put correct resource name in relatedObjects\n1914938 - PVC disk is not shown on customization wizard general tab\n1914941 - VM Template rootdisk is not deleted after fetching default disk bus\n1914975 - Collect logs from openshift-sdn namespace\n1915003 - No estimate of average node readiness during lifetime of a cluster\n1915027 - fix MCS blocking iptables rules\n1915041 - s3:ListMultipartUploadParts is relied on implicitly\n1915079 - Canary controller should not periodically rotate the canary route endpoint for performance reasons\n1915080 - Large number of tcp connections with shiftstack ocp cluster in about 24 hours\n1915085 - Pods created and rapidly terminated get stuck\n1915114 - [aws-c2s] worker machines are not create during install\n1915133 - Missing default pinned nav items in dev perspective\n1915176 - Update snapshot API CRDs to v1 in web-console when creating volumesnapshot related resource\n1915187 - Remove the \"Tech preview\" tag in web-console for volumesnapshot\n1915188 - Remove HostSubnet anonymization\n1915200 - [OCP 4.7+ OCS 4.6]Arbiter related Note should not show up during UI deployment\n1915217 - OKD payloads expect to be signed with production keys\n1915220 - Remove dropdown workaround for user settings\n1915235 - Failed to upgrade to 4.7 from 4.6 due to the machine-config failure\n1915262 - When deploying with assisted install the CBO operator is installed and enabled without metal3 pod\n1915277 - [e2e][automation]fix cdi upload form test\n1915295 - [BM][IP][Dualstack] Installation failed - operators report dial tcp 172.30.0.1:443: i/o timeout\n1915304 - Updating scheduling component builder \u0026 base images to be consistent with ART\n1915312 - Prevent schedule Linux openshift-network-diagnostics pod on Windows node\n1915318 - [Metal] bareMetal IPI - cannot interact with toolbox container after first execution only in parallel from different connection\n1915348 - [RFE] linuxptp operator needs to expose the uds_address_socket to be used by an application pod\n1915357 - Dev Catalog doesn\u0027t load anything if virtualization operator is installed\n1915379 - New template wizard should require provider and make support input a dropdown type\n1915408 - Failure in operator-registry kind e2e test\n1915416 - [Descheduler] descheduler evicts pod which does not have any ownerRef or descheduler evict annotation\n1915460 - Cluster name size might affect installations\n1915500 - [aws c2s] kube-controller-manager crash loops trying to fetch the AWS instance\n1915540 - Silent 4.7 RHCOS install failure on ppc64le\n1915579 - [Metal] redhat-support-tool became unavailable after tcpdump usage (BareMetal IPI)\n1915582 - p\u0026f: carry upstream pr 97860\n1915594 - [e2e][automation] Improve test for disk validation\n1915617 - Bump bootimage for various fixes\n1915624 - \"Please fill in the following field: Template provider\" blocks customize wizard\n1915627 - Translate Guided Tour text. \n1915643 - OCP4.6 to 4.7 upgrade failed due to manila csi driver operator sync error\n1915647 - Intermittent White screen when the connector dragged to revision\n1915649 - \"Template support\" pop up is not a warning; checkbox text should be rephrased\n1915654 - [e2e][automation] Add a verification for Afinity modal should hint \"Matching node found\"\n1915661 - Can\u0027t run the \u0027oc adm prune\u0027 command in a pod\n1915672 - Kuryr doesn\u0027t work with selfLink disabled. \n1915674 - Golden image PVC creation - storage size should be taken from the template\n1915685 - Message for not supported template is not clear enough\n1915760 - Need to increase timeout to wait rhel worker get ready\n1915793 - quick starts panel syncs incorrectly across browser windows\n1915798 - oauth connection errors for openshift console pods on an OVNKube OCP 4.7 cluster\n1915818 - vsphere-problem-detector: use \"_totals\" in metrics\n1915828 - Latest Dell firmware (04.40.00.00) fails to install IPI on BM using idrac-virtualmedia protocol\n1915859 - vsphere-problem-detector: does not report ESXi host version nor VM HW version\n1915871 - operator-sdk version in new downstream image should be v1.2.0-ocp not v4.7.0\n1915879 - Pipeline Dashboard tab Rename to Pipeline Metrics\n1915885 - Kuryr doesn\u0027t support workers running on multiple subnets\n1915898 - TaskRun log output shows \"undefined\" in streaming\n1915907 - test/cmd/builds.sh uses docker.io\n1915912 - sig-storage-csi-snapshotter image not available\n1915926 - cluster-api-provider-openstack: Update ose-openstack-machine-controllers builder \u0026 base images to be consistent with ART\n1915929 - A11y Violation: svg-img-alt for time axis of Utilization Card on Cluster Dashboard\n1915939 - Resizing the browser window removes Web Terminal Icon\n1915945 - [sig-scheduling] SchedulerPreemption [Serial] validates basic preemption works [Conformance]\n1915959 - Baremetal cluster operator is included in a ROKS installation of 4.7\n1915962 - ROKS: manifest with machine health check fails to apply in 4.7\n1915972 - Global configuration breadcrumbs do not work as expected\n1915981 - Install ethtool and conntrack in container for debugging\n1915995 - \"Edit RoleBinding Subject\" action under RoleBinding list page kebab actions causes unhandled exception\n1915998 - Installer bootstrap node setting of additional subnets inconsistent with additional security groups\n1916021 - OLM enters infinite loop if Pending CSV replaces itself\n1916056 - Need Visual Web Terminal metric enabled for OCP monitoring telemetry\n1916081 - non-existant should be non-existent in CloudCredentialOperatorTargetNamespaceMissing alert\u0027s annotations\n1916099 - VM creation - customization wizard - user should be allowed to delete and re-create root disk\n1916126 - [e2e][automation] Help fix tests for vm guest-agent and next-run-configuration\n1916145 - Explicitly set minimum versions of python libraries\n1916164 - Update csi-driver-nfs builder \u0026 base images to be consistent with ART\n1916221 - csi-snapshot-controller-operator: bump dependencies for 4.7\n1916271 - Known issues should mention failure to apply soft-anti-affinity to masters beyond the third\n1916363 - [OVN] ovs-configuration.service reports as failed within all nodes using version 4.7.0-fc.2\n1916379 - error metrics from vsphere-problem-detector should be gauge\n1916382 - Can\u0027t create ext4 filesystems with Ignition\n1916384 - 4.5.15 and later cluster-version operator does not sync ClusterVersion status before exiting, leaving \u0027verified: false\u0027 even for verified updates\n1916401 - Deleting an ingress controller with a bad DNS Record hangs\n1916417 - [Kuryr] Must-gather does not have all Custom Resources information\n1916419 - [sig-devex][Feature:ImageEcosystem][Slow] openshift images should be SCL enabled returning s2i usage when running the image\n1916454 - teach CCO about upgradeability from 4.6 to 4.7\n1916486 - [OCP RHV] [Docs] Update RHV CSI provisioning section in OCP documenation\n1916502 - Boot disk mirroring fails with mdadm error\n1916524 - Two rootdisk shows on storage step\n1916580 - Default yaml is broken for VM and VM template\n1916621 - oc adm node-logs examples are wrong\n1916642 - [zh_CN] Redundant period in Secrets - Create drop down menu - Key value secret. \n1916692 - Possibly fails to destroy LB and thus cluster\n1916711 - Update Kube dependencies in MCO to 1.20.0\n1916747 - remove links to quick starts if virtualization operator isn\u0027t updated to 2.6\n1916764 - editing a workload with no application applied, will auto fill the app\n1916834 - Pipeline Metrics - Text Updates\n1916843 - collect logs from openshift-sdn-controller pod\n1916853 - cluster will not gracefully recover if openshift-etcd namespace is removed\n1916882 - OCS 4.7 LSO : wizard (Discover disks and create storageclass) does not show zone when topology.kubernetes.io/zone are added manually\n1916888 - OCS wizard Donor chart does not get updated when `Device Type` is edited\n1916938 - Using 4.6 install-config.yaml file with lbFloatingIP results in validation error \"Forbidden: cannot specify lbFloatingIP and apiFloatingIP together\"\n1916949 - ROKS: manifests in openshift-oauth-apiserver ns fails to create with non-existent namespace\n1917101 - [UPI on oVirt] - \u0027RHCOS image\u0027 topic isn\u0027t located in the right place in UPI document\n1917114 - Upgrade from 4.5.9 to 4.7 fails as authentication operator is Degraded due to \u0027\"ProxyConfigController\" controller failed to sync \"key\"\u0027 error\n1917117 - Common templates - disks screen: invalid disk name\n1917124 - Custom template - clone existing PVC - the name of the target VM\u0027s data volume is hard-coded; only one VM can be created\n1917146 - [oVirt] Consume 23-10 ovirt sdk- csi operator\n1917147 - [oVirt] csi operator panics if ovirt-engine suddenly becomes unavailable. \n1917148 - [oVirt] Consume 23-10 ovirt sdk\n1917239 - Monitoring time options overlaps monitoring tab navigation when Quickstart panel is opened\n1917272 - Should update the default minSize to 1Gi when create localvolumeset on web console\n1917303 - [automation][e2e] make kubevirt-plugin gating job mandatory\n1917315 - localvolumeset-local-provisoner-xxx pods are not killed after upgrading from 4.6 to 4.7\n1917327 - annotations.message maybe wrong for NTOPodsNotReady alert\n1917367 - Refactor periodic.go\n1917371 - Add docs on how to use the built-in profiler\n1917372 - Application metrics are shown on Metrics dashboard but not in linked Prometheus UI in OCP management console\n1917395 - pv-pool backing store name restriction should be at 43 characters from the ocs ui\n1917484 - [BM][IPI] Failed to scale down machineset\n1917522 - Deprecate --filter-by-os in oc adm catalog mirror\n1917537 - controllers continuously busy reconciling operator\n1917551 - use min_over_time for vsphere prometheus alerts\n1917585 - OLM Operator install page missing i18n\n1917587 - Manila CSI operator becomes degraded if user doesn\u0027t have permissions to list share types\n1917605 - Deleting an exgw causes pods to no longer route to other exgws\n1917614 - [aws c2s] ingress operator uses unavailable resourcegrouptaggings API\n1917656 - Add to Project/application for eventSources from topology shows 404\n1917658 - Show TP badge for sources powered by camel connectors in create flow\n1917660 - Editing parallelism of job get error info\n1917678 - Could not provision pv when no symlink and target found on rhel worker\n1917679 - Hide double CTA in admin pipelineruns tab\n1917683 - `NodeTextFileCollectorScrapeError` alert in OCP 4.6 cluster. \n1917759 - Console operator panics after setting plugin that does not exists to the console-operator config\n1917765 - ansible-operator version in downstream image should be v1.3.0 not v4.7.0\n1917770 - helm-operator version in downstream image should be v1.3.0 not v4.7.0\n1917799 - Gather s list of names and versions of installed OLM operators\n1917803 - [sig-storage] Pod Disks should be able to delete a non-existent PD without error\n1917814 - Show Broker create option in eventing under admin perspective\n1917838 - MachineSet scaling from 0 is not available or evaluated incorrectly for the new or changed instance types\n1917872 - [oVirt] rebase on latest SDK 2021-01-12\n1917911 - network-tools needs ovnkube-trace binary from ovn-kubernetes image\n1917938 - upgrade version of dnsmasq package\n1917942 - Canary controller causes panic in ingress-operator\n1918019 - Undesired scrollbars in markdown area of QuickStart\n1918068 - Flaky olm integration tests\n1918085 - reversed name of job and namespace in cvo log\n1918112 - Flavor is not editable if a customize VM is created from cli\n1918129 - Update IO sample archive with missing resources \u0026 remove IP anonymization from clusteroperator resources\n1918132 - i18n: Volume Snapshot Contents menu is not translated\n1918133 - [e2e][automation] Fix ocp 4.7 existing tests - part2\n1918140 - Deployment openstack-cinder-csi-driver-controller and openstack-manila-csi-controllerplugin doesn\u0027t be installed on OSP\n1918153 - When `\u0026` character is set as an environment variable in a build config it is getting converted as `\\u0026`\n1918185 - Capitalization on PLR details page\n1918287 - [ovirt] ovirt csi driver is flooding RHV with API calls and spam the event UI with new connections\n1918318 - Kamelet connector\u0027s are not shown in eventing section under Admin perspective\n1918351 - Gather SAP configuration (SCC \u0026 ClusterRoleBinding)\n1918375 - [calico] rbac-proxy container in kube-proxy fails to create tokenreviews\n1918395 - [ovirt] increase livenessProbe period\n1918415 - MCD nil pointer on dropins\n1918438 - [ja_JP, zh_CN] Serverless i18n misses\n1918440 - Kernel Arguments get reapplied even when no new kargs has been added in MachineConfig\n1918471 - CustomNoUpgrade Feature gates are not working correctly\n1918558 - Supermicro nodes boot to PXE upon reboot after successful deployment to disk\n1918622 - Updating ose-jenkins-agent-maven builder \u0026 base images to be consistent with ART\n1918623 - Updating ose-jenkins-agent-nodejs-12 builder \u0026 base images to be consistent with ART\n1918625 - Updating ose-jenkins-agent-nodejs-10 builder \u0026 base images to be consistent with ART\n1918635 - Updating openshift-jenkins-2 builder \u0026 base images to be consistent with ART #1197\n1918639 - Event listener with triggerRef crashes the console\n1918648 - Subscription page doesn\u0027t show InstallPlan correctly\n1918716 - Manilacsi becomes degraded even though it is not available with the underlying Openstack\n1918748 - helmchartrepo is not http(s)_proxy-aware\n1918757 - Consistant fallures of features/project-creation.feature Cypress test in CI\n1918803 - Need dedicated details page w/ global config breadcrumbs for \u0027KnativeServing\u0027 plugin\n1918826 - Insights popover icons are not horizontally aligned\n1918879 - need better debug for bad pull secrets\n1918958 - The default NMstate instance from the operator is incorrect\n1919097 - Close bracket \")\" missing at the end of the sentence in the UI\n1919231 - quick search modal cut off on smaller screens\n1919259 - Make \"Add x\" singular in Pipeline Builder\n1919260 - VM Template list actions should not wrap\n1919271 - NM prepender script doesn\u0027t support systemd-resolved\n1919341 - Updating ose-jenkins-agent-maven builder \u0026 base images to be consistent with ART\n1919360 - Need managed-cluster-info metric enabled for OCP monitoring telemetry\n1919379 - dotnet logo out of date\n1919387 - Console login fails with no error when it can\u0027t write to localStorage\n1919396 - A11y Violation: svg-img-alt on Pod Status ring\n1919407 - OpenStack IPI has three-node control plane limitation, but InstallConfigs aren\u0027t verified\n1919750 - Search InstallPlans got Minified React error\n1919778 - Upgrade is stuck in insights operator Degraded with \"Source clusterconfig could not be retrieved\" until insights operator pod is manually deleted\n1919823 - OCP 4.7 Internationalization Chinese tranlate issue\n1919851 - Visualization does not render when Pipeline \u0026 Task share same name\n1919862 - The tip information for `oc new-project  --skip-config-write` is wrong\n1919876 - VM created via customize wizard cannot inherit template\u0027s PVC attributes\n1919877 - Click on KSVC breaks with white screen\n1919879 - The toolbox container name is changed from \u0027toolbox-root\u0027  to \u0027toolbox-\u0027 in a chroot environment\n1919945 - user entered name value overridden by default value when selecting a git repository\n1919968 - [release-4.7] Undiagnosed panic detected in pod runtime.go:76: invalid memory address or nil pointer dereference\n1919970 - NTO does not update when the tuned profile is updated. \n1919999 - Bump Cluster Resource Operator Golang Versions\n1920027 - machine-config-operator consistently failing during 4.6 to 4.7 upgrades and clusters do not install successfully with proxy configuration\n1920200 - user-settings network error results in infinite loop of requests\n1920205 - operator-registry e2e tests not working properly\n1920214 - Bump golang to 1.15 in cluster-resource-override-admission\n1920248 - re-running the pipelinerun with pipelinespec crashes the UI\n1920320 - VM template field is \"Not available\" if it\u0027s created from common template\n1920367 - When creating localvolumeset instance from the web console, the title for setting volumeMode is `Disk Mode`\n1920368 - Fix containers creation issue resulting in runc running on Guaranteed Pod CPUs\n1920390 - Monitoring \u003e Metrics graph shifts to the left when clicking the \"Stacked\" option and when toggling data series lines on / off\n1920426 - Egress Router CNI OWNERS file should have ovn-k team members\n1920427 - Need to update `oc login` help page since we don\u0027t support prompt interactively for the username\n1920430 - [V2V] [UI] Browser window becomes empty when running import wizard for the first time\n1920438 - openshift-tuned panics on turning debugging on/off. \n1920445 - e2e-gcp-ovn-upgrade job is actually using openshift-sdn\n1920481 - kuryr-cni pods using unreasonable amount of CPU\n1920509 - wait for port 6443 to be open in the kube-scheduler container; use ss instead of lsof\n1920524 - Topology graph crashes adding Open Data Hub operator\n1920526 - catalog operator causing CPU spikes and bad etcd performance\n1920551 - Boot Order is not editable for Templates in \"openshift\" namespace\n1920555 - bump cluster-resource-override-admission api dependencies\n1920571 - fcp multipath will not recover failed paths automatically\n1920619 - Remove default scheduler profile value\n1920655 - Console should not show the Create Autoscaler link in cluster settings when the CRD is not present\n1920674 - MissingKey errors in bindings namespace\n1920684 - Text in language preferences modal is misleading\n1920695 - CI is broken because of bad image registry reference in the Makefile\n1920756 - update generic-admission-server library to get the system:masters authorization optimization\n1920769 - [Upgrade] OCP upgrade from 4.6.13 to 4.7.0-fc.4 for \"network-check-target\" failed when \"defaultNodeSelector\" is set\n1920771 - i18n: Delete persistent volume claim drop down is not translated\n1920806 - [OVN]Nodes lost network connection after reboot on the vSphere UPI\n1920912 - Unable to power off BMH from console\n1920981 - When OCS was deployed with arbiter mode enable add capacity is increasing the count by \"2\"\n1920984 - [e2e][automation] some menu items names are out dated\n1921013 - Gather PersistentVolume definition (if any) used in image registry config\n1921023 - Do not enable Flexible Scaling to true for Internal mode clusters(revert to 4.6 behavior)\n1921087 - \u0027start next quick start\u0027 link doesn\u0027t work and is unintuitive\n1921088 - test-cmd is failing on volumes.sh pretty consistently\n1921248 - Clarify the kubelet configuration cr description\n1921253 - Text filter default placeholder text not internationalized\n1921258 - User Preferences: Active perspective and project change in the current window when selected in a different window\n1921275 - Panic in authentication-operator in (*deploymentController).updateOperatorDeploymentInfo\n1921277 - Fix Warning and Info log statements to handle arguments\n1921281 - oc get -o yaml --export returns \"error: unknown flag: --export\"\n1921458 - [SDK] Gracefully handle the `run bundle-upgrade` if the lower version operator doesn\u0027t exist\n1921556 - [OCS with Vault]: OCS pods didn\u0027t comeup after deploying with Vault details from UI\n1921572 - For external source (i.e GitHub Source) form view as well shows yaml\n1921580 - [e2e][automation]Test VM detail view actions dropdown does not pass\n1921610 - Pipeline metrics font size inconsistency\n1921644 - [e2e][automation] tests errors with wrong cloudInit new line syntax\n1921650 - CVE-2021-3121 gogo/protobuf: plugin/unmarshal/unmarshal.go lacks certain index validation\n1921655 - [OSP] Incorrect error handling during cloudinfo generation\n1921713 - [e2e][automation]  fix failing VM migration tests\n1921762 - Serving and Eventing breadcrumbs should direct users back to tabbed page view\n1921774 - delete application modal errors when a resource cannot be found\n1921806 - Explore page APIResourceLinks aren\u0027t i18ned\n1921823 - CheckBoxControls not internationalized\n1921836 - AccessTableRows don\u0027t internationalize \"User\" or \"Group\"\n1921857 - Test flake when hitting router in e2e tests due to one router not being up to date\n1921880 - Dynamic plugins are not initialized on console load in production mode\n1921911 - Installer PR #4589 is causing leak of IAM role policy bindings\n1921921 - \"Global Configuration\" breadcrumb does not use sentence case\n1921949 - Console bug - source code URL broken for gitlab self-hosted repositories\n1921954 - Subscription-related constraints in ResolutionFailed events are misleading\n1922015 - buttons in modal header are invisible on Safari\n1922021 - Nodes terminal page \u0027Expand\u0027 \u0027Collapse\u0027 button not translated\n1922050 - [e2e][automation] Improve vm clone tests\n1922066 - Cannot create VM from custom template which has extra disk\n1922098 - Namespace selection dialog is not closed after select a namespace\n1922099 - Updated Readme documentation for QE code review and setup\n1922146 - Egress Router CNI doesn\u0027t have logging support. \n1922267 - Collect specific ADFS error\n1922292 - Bump RHCOS boot images for 4.7\n1922454 - CRI-O doesn\u0027t enable pprof by default\n1922473 - reconcile LSO images for 4.8\n1922573 - oc returns an error while using -o jsonpath when there is no resource found in the namespace\n1922782 - Source registry missing docker:// in yaml\n1922907 - Interop UI Tests - step implementation for updating feature files\n1922911 - Page crash when click the \"Stacked\" checkbox after clicking the data series toggle buttons\n1922991 - \"verify /run filesystem contents do not have unexpected content using a simple Docker Strategy Build\" test fails on OKD\n1923003 - WebConsole Insights widget showing \"Issues pending\" when the cluster doesn\u0027t report anything\n1923098 - [vsphere-problem-detector-operator] Need permission to access replicasets.apps resources\n1923102 - [vsphere-problem-detector-operator] pod\u0027s version is not correct\n1923245 - [Assisted-4.7] [Staging][Minimal-ISO] nodes fails to boot\n1923674 - k8s 1.20 vendor dependencies\n1923721 - PipelineRun running status icon is not rotating\n1923753 - Increase initialDelaySeconds for ovs-daemons container in the ovs-node daemonset for upgrade scenarios\n1923774 - Docker builds failing for openshift/cluster-resource-override-admission-operator\n1923802 - ci/prow/e2e-aws-olm build failing for openshift/cluster-resource-override-admission-operator\n1923874 - Unable to specify values with % in kubeletconfig\n1923888 - Fixes error metadata gathering\n1923892 - Update arch.md after refactor. \n1923894 - \"installed\" operator status in operatorhub page does not reflect the real status of operator\n1923895 - Changelog generation. \n1923911 - [e2e][automation] Improve tests for vm details page and list filter\n1923945 - PVC Name and Namespace resets when user changes os/flavor/workload\n1923951 - EventSources shows `undefined` in project\n1923973 - Dynamic plugin demo README does not contain info how to enable the ConsolePlugins\n1924046 - Localhost: Refreshing on a Project removes it from nav item urls\n1924078 - Topology quick search View all results footer should be sticky. \n1924081 - NTO should ship the latest Tuned daemon release 2.15\n1924084 - backend tests incorrectly hard-code artifacts dir\n1924128 - [sig-builds][Feature:Builds] verify /run filesystem contents  do not have unexpected content using a simple Docker Strategy Build\n1924135 - Under sufficient load, CRI-O may segfault\n1924143 - Code Editor Decorator url is broken for Bitbucket repos\n1924188 - Language selector dropdown doesn\u0027t always pre-select the language\n1924365 - Add extra disk for VM which use boot source PXE\n1924383 - Degraded network operator during upgrade to 4.7.z\n1924387 - [ja_JP][zh_CN] Incorrect warning message for deleting namespace on Delete Pod dialog box. \n1924480 - non cluster admin can not take VM snapshot: An error occurred, cannot set blockOwnerDeletion if an ownerReference refers to a resource you can\u0027t set finalizers on\n1924583 - Deprectaed templates are listed in the Templates screen\n1924870 - pick upstream pr#96901: plumb context with request deadline\n1924955 - Images from Private external registry not working in deploy Image\n1924961 - k8sutil.TrimDNS1123Label creates invalid values\n1924985 - Build egress-router-cni for both RHEL 7 and 8\n1925020 - Console demo plugin deployment image shoult not point to dockerhub\n1925024 - Remove extra validations on kafka source form view net section\n1925039 - [e2e] Fix Test - ID(CNV-5327) Change Custom Flavor while VM is running\n1925072 - NTO needs to ship the current latest stalld v1.7.0\n1925163 - Missing info about dev catalog in boot source template column\n1925200 - Monitoring Alert icon is missing on the workload in Topology view\n1925262 - apiserver getting 2 SIGTERM signals which was immediately making it exit code 1\n1925319 - bash syntax error in configure-ovs.sh script\n1925408 - Remove StatefulSet gatherer and replace it with gathering corresponding config map data\n1925516 - Pipeline Metrics Tooltips are overlapping data\n1925562 - Add new ArgoCD link from GitOps application environments page\n1925596 - Gitops details page image and commit id text overflows past card boundary\n1926556 - \u0027excessive etcd leader changes\u0027 test case failing in serial job because prometheus data is wiped by machine set test\n1926588 - The tarball of operator-sdk is not ready for ocp4.7\n1927456 - 4.7 still points to 4.6 catalog images\n1927500 - API server exits non-zero on 2 SIGTERM signals\n1929278 - Monitoring workloads using too high a priorityclass\n1929645 - Remove openshift:kubevirt-machine-controllers decleration from machine-api\n1929920 - Cluster monitoring documentation link is broken - 404 not found\n\n5. References:\n\nhttps://access.redhat.com/security/cve/CVE-2018-10103\nhttps://access.redhat.com/security/cve/CVE-2018-10105\nhttps://access.redhat.com/security/cve/CVE-2018-14461\nhttps://access.redhat.com/security/cve/CVE-2018-14462\nhttps://access.redhat.com/security/cve/CVE-2018-14463\nhttps://access.redhat.com/security/cve/CVE-2018-14464\nhttps://access.redhat.com/security/cve/CVE-2018-14465\nhttps://access.redhat.com/security/cve/CVE-2018-14466\nhttps://access.redhat.com/security/cve/CVE-2018-14467\nhttps://access.redhat.com/security/cve/CVE-2018-14468\nhttps://access.redhat.com/security/cve/CVE-2018-14469\nhttps://access.redhat.com/security/cve/CVE-2018-14470\nhttps://access.redhat.com/security/cve/CVE-2018-14553\nhttps://access.redhat.com/security/cve/CVE-2018-14879\nhttps://access.redhat.com/security/cve/CVE-2018-14880\nhttps://access.redhat.com/security/cve/CVE-2018-14881\nhttps://access.redhat.com/security/cve/CVE-2018-14882\nhttps://access.redhat.com/security/cve/CVE-2018-16227\nhttps://access.redhat.com/security/cve/CVE-2018-16228\nhttps://access.redhat.com/security/cve/CVE-2018-16229\nhttps://access.redhat.com/security/cve/CVE-2018-16230\nhttps://access.redhat.com/security/cve/CVE-2018-16300\nhttps://access.redhat.com/security/cve/CVE-2018-16451\nhttps://access.redhat.com/security/cve/CVE-2018-16452\nhttps://access.redhat.com/security/cve/CVE-2018-20843\nhttps://access.redhat.com/security/cve/CVE-2019-3884\nhttps://access.redhat.com/security/cve/CVE-2019-5018\nhttps://access.redhat.com/security/cve/CVE-2019-6977\nhttps://access.redhat.com/security/cve/CVE-2019-6978\nhttps://access.redhat.com/security/cve/CVE-2019-8625\nhttps://access.redhat.com/security/cve/CVE-2019-8710\nhttps://access.redhat.com/security/cve/CVE-2019-8720\nhttps://access.redhat.com/security/cve/CVE-2019-8743\nhttps://access.redhat.com/security/cve/CVE-2019-8764\nhttps://access.redhat.com/security/cve/CVE-2019-8766\nhttps://access.redhat.com/security/cve/CVE-2019-8769\nhttps://access.redhat.com/security/cve/CVE-2019-8771\nhttps://access.redhat.com/security/cve/CVE-2019-8782\nhttps://access.redhat.com/security/cve/CVE-2019-8783\nhttps://access.redhat.com/security/cve/CVE-2019-8808\nhttps://access.redhat.com/security/cve/CVE-2019-8811\nhttps://access.redhat.com/security/cve/CVE-2019-8812\nhttps://access.redhat.com/security/cve/CVE-2019-8813\nhttps://access.redhat.com/security/cve/CVE-2019-8814\nhttps://access.redhat.com/security/cve/CVE-2019-8815\nhttps://access.redhat.com/security/cve/CVE-2019-8816\nhttps://access.redhat.com/security/cve/CVE-2019-8819\nhttps://access.redhat.com/security/cve/CVE-2019-8820\nhttps://access.redhat.com/security/cve/CVE-2019-8823\nhttps://access.redhat.com/security/cve/CVE-2019-8835\nhttps://access.redhat.com/security/cve/CVE-2019-8844\nhttps://access.redhat.com/security/cve/CVE-2019-8846\nhttps://access.redhat.com/security/cve/CVE-2019-9455\nhttps://access.redhat.com/security/cve/CVE-2019-9458\nhttps://access.redhat.com/security/cve/CVE-2019-11068\nhttps://access.redhat.com/security/cve/CVE-2019-12614\nhttps://access.redhat.com/security/cve/CVE-2019-13050\nhttps://access.redhat.com/security/cve/CVE-2019-13225\nhttps://access.redhat.com/security/cve/CVE-2019-13627\nhttps://access.redhat.com/security/cve/CVE-2019-14889\nhttps://access.redhat.com/security/cve/CVE-2019-15165\nhttps://access.redhat.com/security/cve/CVE-2019-15166\nhttps://access.redhat.com/security/cve/CVE-2019-15903\nhttps://access.redhat.com/security/cve/CVE-2019-15917\nhttps://access.redhat.com/security/cve/CVE-2019-15925\nhttps://access.redhat.com/security/cve/CVE-2019-16167\nhttps://access.redhat.com/security/cve/CVE-2019-16168\nhttps://access.redhat.com/security/cve/CVE-2019-16231\nhttps://access.redhat.com/security/cve/CVE-2019-16233\nhttps://access.redhat.com/security/cve/CVE-2019-16935\nhttps://access.redhat.com/security/cve/CVE-2019-17450\nhttps://access.redhat.com/security/cve/CVE-2019-17546\nhttps://access.redhat.com/security/cve/CVE-2019-18197\nhttps://access.redhat.com/security/cve/CVE-2019-18808\nhttps://access.redhat.com/security/cve/CVE-2019-18809\nhttps://access.redhat.com/security/cve/CVE-2019-19046\nhttps://access.redhat.com/security/cve/CVE-2019-19056\nhttps://access.redhat.com/security/cve/CVE-2019-19062\nhttps://access.redhat.com/security/cve/CVE-2019-19063\nhttps://access.redhat.com/security/cve/CVE-2019-19068\nhttps://access.redhat.com/security/cve/CVE-2019-19072\nhttps://access.redhat.com/security/cve/CVE-2019-19221\nhttps://access.redhat.com/security/cve/CVE-2019-19319\nhttps://access.redhat.com/security/cve/CVE-2019-19332\nhttps://access.redhat.com/security/cve/CVE-2019-19447\nhttps://access.redhat.com/security/cve/CVE-2019-19524\nhttps://access.redhat.com/security/cve/CVE-2019-19533\nhttps://access.redhat.com/security/cve/CVE-2019-19537\nhttps://access.redhat.com/security/cve/CVE-2019-19543\nhttps://access.redhat.com/security/cve/CVE-2019-19602\nhttps://access.redhat.com/security/cve/CVE-2019-19767\nhttps://access.redhat.com/security/cve/CVE-2019-19770\nhttps://access.redhat.com/security/cve/CVE-2019-19906\nhttps://access.redhat.com/security/cve/CVE-2019-19956\nhttps://access.redhat.com/security/cve/CVE-2019-20054\nhttps://access.redhat.com/security/cve/CVE-2019-20218\nhttps://access.redhat.com/security/cve/CVE-2019-20386\nhttps://access.redhat.com/security/cve/CVE-2019-20387\nhttps://access.redhat.com/security/cve/CVE-2019-20388\nhttps://access.redhat.com/security/cve/CVE-2019-20454\nhttps://access.redhat.com/security/cve/CVE-2019-20636\nhttps://access.redhat.com/security/cve/CVE-2019-20807\nhttps://access.redhat.com/security/cve/CVE-2019-20812\nhttps://access.redhat.com/security/cve/CVE-2019-20907\nhttps://access.redhat.com/security/cve/CVE-2019-20916\nhttps://access.redhat.com/security/cve/CVE-2020-0305\nhttps://access.redhat.com/security/cve/CVE-2020-0444\nhttps://access.redhat.com/security/cve/CVE-2020-1716\nhttps://access.redhat.com/security/cve/CVE-2020-1730\nhttps://access.redhat.com/security/cve/CVE-2020-1751\nhttps://access.redhat.com/security/cve/CVE-2020-1752\nhttps://access.redhat.com/security/cve/CVE-2020-1971\nhttps://access.redhat.com/security/cve/CVE-2020-2574\nhttps://access.redhat.com/security/cve/CVE-2020-2752\nhttps://access.redhat.com/security/cve/CVE-2020-2922\nhttps://access.redhat.com/security/cve/CVE-2020-3862\nhttps://access.redhat.com/security/cve/CVE-2020-3864\nhttps://access.redhat.com/security/cve/CVE-2020-3865\nhttps://access.redhat.com/security/cve/CVE-2020-3867\nhttps://access.redhat.com/security/cve/CVE-2020-3868\nhttps://access.redhat.com/security/cve/CVE-2020-3885\nhttps://access.redhat.com/security/cve/CVE-2020-3894\nhttps://access.redhat.com/security/cve/CVE-2020-3895\nhttps://access.redhat.com/security/cve/CVE-2020-3897\nhttps://access.redhat.com/security/cve/CVE-2020-3898\nhttps://access.redhat.com/security/cve/CVE-2020-3899\nhttps://access.redhat.com/security/cve/CVE-2020-3900\nhttps://access.redhat.com/security/cve/CVE-2020-3901\nhttps://access.redhat.com/security/cve/CVE-2020-3902\nhttps://access.redhat.com/security/cve/CVE-2020-6405\nhttps://access.redhat.com/security/cve/CVE-2020-7595\nhttps://access.redhat.com/security/cve/CVE-2020-7774\nhttps://access.redhat.com/security/cve/CVE-2020-8177\nhttps://access.redhat.com/security/cve/CVE-2020-8492\nhttps://access.redhat.com/security/cve/CVE-2020-8563\nhttps://access.redhat.com/security/cve/CVE-2020-8566\nhttps://access.redhat.com/security/cve/CVE-2020-8619\nhttps://access.redhat.com/security/cve/CVE-2020-8622\nhttps://access.redhat.com/security/cve/CVE-2020-8623\nhttps://access.redhat.com/security/cve/CVE-2020-8624\nhttps://access.redhat.com/security/cve/CVE-2020-8647\nhttps://access.redhat.com/security/cve/CVE-2020-8648\nhttps://access.redhat.com/security/cve/CVE-2020-8649\nhttps://access.redhat.com/security/cve/CVE-2020-9327\nhttps://access.redhat.com/security/cve/CVE-2020-9802\nhttps://access.redhat.com/security/cve/CVE-2020-9803\nhttps://access.redhat.com/security/cve/CVE-2020-9805\nhttps://access.redhat.com/security/cve/CVE-2020-9806\nhttps://access.redhat.com/security/cve/CVE-2020-9807\nhttps://access.redhat.com/security/cve/CVE-2020-9843\nhttps://access.redhat.com/security/cve/CVE-2020-9850\nhttps://access.redhat.com/security/cve/CVE-2020-9862\nhttps://access.redhat.com/security/cve/CVE-2020-9893\nhttps://access.redhat.com/security/cve/CVE-2020-9894\nhttps://access.redhat.com/security/cve/CVE-2020-9895\nhttps://access.redhat.com/security/cve/CVE-2020-9915\nhttps://access.redhat.com/security/cve/CVE-2020-9925\nhttps://access.redhat.com/security/cve/CVE-2020-10018\nhttps://access.redhat.com/security/cve/CVE-2020-10029\nhttps://access.redhat.com/security/cve/CVE-2020-10732\nhttps://access.redhat.com/security/cve/CVE-2020-10749\nhttps://access.redhat.com/security/cve/CVE-2020-10751\nhttps://access.redhat.com/security/cve/CVE-2020-10763\nhttps://access.redhat.com/security/cve/CVE-2020-10773\nhttps://access.redhat.com/security/cve/CVE-2020-10774\nhttps://access.redhat.com/security/cve/CVE-2020-10942\nhttps://access.redhat.com/security/cve/CVE-2020-11565\nhttps://access.redhat.com/security/cve/CVE-2020-11668\nhttps://access.redhat.com/security/cve/CVE-2020-11793\nhttps://access.redhat.com/security/cve/CVE-2020-12465\nhttps://access.redhat.com/security/cve/CVE-2020-12655\nhttps://access.redhat.com/security/cve/CVE-2020-12659\nhttps://access.redhat.com/security/cve/CVE-2020-12770\nhttps://access.redhat.com/security/cve/CVE-2020-12826\nhttps://access.redhat.com/security/cve/CVE-2020-13249\nhttps://access.redhat.com/security/cve/CVE-2020-13630\nhttps://access.redhat.com/security/cve/CVE-2020-13631\nhttps://access.redhat.com/security/cve/CVE-2020-13632\nhttps://access.redhat.com/security/cve/CVE-2020-14019\nhttps://access.redhat.com/security/cve/CVE-2020-14040\nhttps://access.redhat.com/security/cve/CVE-2020-14381\nhttps://access.redhat.com/security/cve/CVE-2020-14382\nhttps://access.redhat.com/security/cve/CVE-2020-14391\nhttps://access.redhat.com/security/cve/CVE-2020-14422\nhttps://access.redhat.com/security/cve/CVE-2020-15157\nhttps://access.redhat.com/security/cve/CVE-2020-15503\nhttps://access.redhat.com/security/cve/CVE-2020-15862\nhttps://access.redhat.com/security/cve/CVE-2020-15999\nhttps://access.redhat.com/security/cve/CVE-2020-16166\nhttps://access.redhat.com/security/cve/CVE-2020-24490\nhttps://access.redhat.com/security/cve/CVE-2020-24659\nhttps://access.redhat.com/security/cve/CVE-2020-25211\nhttps://access.redhat.com/security/cve/CVE-2020-25641\nhttps://access.redhat.com/security/cve/CVE-2020-25658\nhttps://access.redhat.com/security/cve/CVE-2020-25661\nhttps://access.redhat.com/security/cve/CVE-2020-25662\nhttps://access.redhat.com/security/cve/CVE-2020-25681\nhttps://access.redhat.com/security/cve/CVE-2020-25682\nhttps://access.redhat.com/security/cve/CVE-2020-25683\nhttps://access.redhat.com/security/cve/CVE-2020-25684\nhttps://access.redhat.com/security/cve/CVE-2020-25685\nhttps://access.redhat.com/security/cve/CVE-2020-25686\nhttps://access.redhat.com/security/cve/CVE-2020-25687\nhttps://access.redhat.com/security/cve/CVE-2020-25694\nhttps://access.redhat.com/security/cve/CVE-2020-25696\nhttps://access.redhat.com/security/cve/CVE-2020-26160\nhttps://access.redhat.com/security/cve/CVE-2020-27813\nhttps://access.redhat.com/security/cve/CVE-2020-27846\nhttps://access.redhat.com/security/cve/CVE-2020-28362\nhttps://access.redhat.com/security/cve/CVE-2020-29652\nhttps://access.redhat.com/security/cve/CVE-2021-2007\nhttps://access.redhat.com/security/cve/CVE-2021-3121\nhttps://access.redhat.com/security/updates/classification/#moderate\n\n6. Contact:\n\nThe Red Hat security contact is \u003csecalert@redhat.com\u003e. More contact\ndetails at https://access.redhat.com/security/team/contact/\n\nCopyright 2021 Red Hat, Inc. \n-----BEGIN PGP SIGNATURE-----\nVersion: GnuPG v1\n\niQIVAwUBYDZ+bNzjgjWX9erEAQghXg//awGwjQxJ5LEZWBTdgyuCa8mHEi2rop5T\nlmebolBMNRSbo9gI8LMSHlvIBBFiV4CuFvfxE0AVLNentfzOTH11TxNWe1KQYt4H\nEmcGHPeHWTxKDkvAHtVcWXy9WN3y5d4lHSaq6AR1nHRPcj/k1upyx22kotpnYxN8\n4d49PjFTO3YbmdYpNLVJ9nY8izqUpTfM7YSyj6ANZSlaYc5Z215o6TPo6e3wobf4\nmWu+VfDS0v+/AbGhQhO2sQ7r2ysJ85MB7c62cxck4a51KiA0NKd4xr0TAA4KHnNL\nISHFzi5QYXu+meE+9wYRo1ZjJ5fbPj41+1TJbR6O4CbP0xQiFpcUSipNju3rGSGy\nAe5G/QGT8J7HzOjlKVvY3SFu/odENR6c+xUIr7IB/FBlu7DdPF2XxMZDQD4DKHEk\n4aiDbuiEL3Yf78Ic1RqPPmrj9plIwprVFQz+k3JaQXKD+1dBxO6tk+nVu2/5xNbM\nuR03hrthYYIpdXLSWU4lzq8j3kQ9wZ4j/m2o6/K6eHNl9PyqAG5jfQv9bVf8E3oG\nkrzc/JLvOfHNEQ/oJs/v/DFDmnAxshCCtGWlpLJ5J0pcD3EePsrPNs1QtQurVrMv\nRjfBCWKOij53+BinrMKHdsHxfur7GCFCIQCVaLIv6GUjX2NWI0voIVA8JkrFNNp6\nMcvuEaxco7U=\n=sw8i\n-----END PGP SIGNATURE-----\n\n--\nRHSA-announce mailing list\nRHSA-announce@redhat.com\nhttps://listman.redhat.com/mailman/listinfo/rhsa-announce\n. \n\nBug Fix(es):\n\n* Configuring the system with non-RT kernel will hang the system\n(BZ#1923220)\n\n3. Bugs fixed (https://bugzilla.redhat.com/):\n\n1902111 - CVE-2020-27813 golang-github-gorilla-websocket: integer overflow leads to denial of service\n\n5. JIRA issues fixed (https://issues.jboss.org/):\n\nCNF-802 - Infrastructure-provided enablement/disablement of interrupt processing for guaranteed pod CPUs\nCNF-854 - Performance tests in CNF Tests\n\n6. Description:\n\nRed Hat OpenShift Do (odo) is a simple CLI tool for developers to create,\nbuild, and deploy applications on OpenShift. The odo tool is completely\nclient-based and requires no server within the OpenShift cluster for\ndeployment. It detects changes to local code and deploys it to the cluster\nautomatically, giving instant feedback to validate changes in real-time. It\nsupports multiple programming languages and frameworks. \n\nThe advisory addresses the following issues:\n\n* Re-release of odo-init-image 1.1.3 for security updates\n\n3. Solution:\n\nDownload and install a new CLI binary by following the instructions linked\nfrom the References section. Bugs fixed (https://bugzilla.redhat.com/):\n\n1832983 - Release of 1.1.3 odo-init-image\n\n5. Solution:\n\nSee the documentation at:\nhttps://access.redhat.com/documentation/en-us/openshift_container_platform/\n4.6/html/serverless_applications/index\n\n4. Bugs fixed (https://bugzilla.redhat.com/):\n\n1874857 - CVE-2020-24553 golang: default Content-Type setting in net/http/cgi and net/http/fcgi could cause XSS\n1897635 - CVE-2020-28362 golang: math/big: panic during recursive division of very large numbers\n1897643 - CVE-2020-28366 golang: malicious symbol names can lead to code execution at build time\n1897646 - CVE-2020-28367 golang: improper validation of cgo flags can lead to code execution at build time\n1906381 - Release of OpenShift Serverless Serving 1.12.0\n1906382 - Release of OpenShift Serverless Eventing 1.12.0\n\n5",
    "sources": [
      {
        "db": "NVD",
        "id": "CVE-2020-7595"
      },
      {
        "db": "JVNDB",
        "id": "JVNDB-2020-001451"
      },
      {
        "db": "VULHUB",
        "id": "VHN-185720"
      },
      {
        "db": "VULMON",
        "id": "CVE-2020-7595"
      },
      {
        "db": "PACKETSTORM",
        "id": "160624"
      },
      {
        "db": "PACKETSTORM",
        "id": "160889"
      },
      {
        "db": "PACKETSTORM",
        "id": "160125"
      },
      {
        "db": "PACKETSTORM",
        "id": "159661"
      },
      {
        "db": "PACKETSTORM",
        "id": "161546"
      },
      {
        "db": "PACKETSTORM",
        "id": "161548"
      },
      {
        "db": "PACKETSTORM",
        "id": "161916"
      },
      {
        "db": "PACKETSTORM",
        "id": "160961"
      }
    ],
    "trust": 2.52
  },
  "external_ids": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/external_ids#",
      "data": {
        "@container": "@list"
      },
      "sources": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/sources#"
        }
      }
    },
    "data": [
      {
        "db": "NVD",
        "id": "CVE-2020-7595",
        "trust": 3.4
      },
      {
        "db": "SIEMENS",
        "id": "SSA-292794",
        "trust": 1.8
      },
      {
        "db": "ICS CERT",
        "id": "ICSA-21-103-08",
        "trust": 1.8
      },
      {
        "db": "PACKETSTORM",
        "id": "161916",
        "trust": 0.8
      },
      {
        "db": "JVN",
        "id": "JVNVU96269392",
        "trust": 0.8
      },
      {
        "db": "JVNDB",
        "id": "JVNDB-2020-001451",
        "trust": 0.8
      },
      {
        "db": "PACKETSTORM",
        "id": "159851",
        "trust": 0.7
      },
      {
        "db": "PACKETSTORM",
        "id": "159349",
        "trust": 0.7
      },
      {
        "db": "PACKETSTORM",
        "id": "162694",
        "trust": 0.7
      },
      {
        "db": "PACKETSTORM",
        "id": "159639",
        "trust": 0.7
      },
      {
        "db": "CNNVD",
        "id": "CNNVD-202001-965",
        "trust": 0.7
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2021.0584",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2023.3732",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2021.1207",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2020.3535",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2021.2604",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2021.1744",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2020.0902",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2020.4513",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2021.1242",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2021.1727",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2020.3364",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2020.1564",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2020.2162",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2020.1826",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2021.0234",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2020.3631",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2021.0864",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2020.0471",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2021.0845",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2020.3868",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2021.0986",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2022.3550",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2021.0691",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2020.3248",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2020.4100",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2020.3102",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2021.0319",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2021.1193",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2021.0171",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2021.3072",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2021.0099",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2020.1638",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2021.4058",
        "trust": 0.6
      },
      {
        "db": "PACKETSTORM",
        "id": "158168",
        "trust": 0.6
      },
      {
        "db": "CS-HELP",
        "id": "SB2021041514",
        "trust": 0.6
      },
      {
        "db": "CS-HELP",
        "id": "SB2021091331",
        "trust": 0.6
      },
      {
        "db": "CS-HELP",
        "id": "SB2021052216",
        "trust": 0.6
      },
      {
        "db": "CS-HELP",
        "id": "SB2022072097",
        "trust": 0.6
      },
      {
        "db": "CS-HELP",
        "id": "SB2021111735",
        "trust": 0.6
      },
      {
        "db": "CNVD",
        "id": "CNVD-2020-04827",
        "trust": 0.1
      },
      {
        "db": "VULHUB",
        "id": "VHN-185720",
        "trust": 0.1
      },
      {
        "db": "VULMON",
        "id": "CVE-2020-7595",
        "trust": 0.1
      },
      {
        "db": "PACKETSTORM",
        "id": "160624",
        "trust": 0.1
      },
      {
        "db": "PACKETSTORM",
        "id": "160889",
        "trust": 0.1
      },
      {
        "db": "PACKETSTORM",
        "id": "160125",
        "trust": 0.1
      },
      {
        "db": "PACKETSTORM",
        "id": "159661",
        "trust": 0.1
      },
      {
        "db": "PACKETSTORM",
        "id": "161546",
        "trust": 0.1
      },
      {
        "db": "PACKETSTORM",
        "id": "161548",
        "trust": 0.1
      },
      {
        "db": "PACKETSTORM",
        "id": "160961",
        "trust": 0.1
      }
    ],
    "sources": [
      {
        "db": "VULHUB",
        "id": "VHN-185720"
      },
      {
        "db": "VULMON",
        "id": "CVE-2020-7595"
      },
      {
        "db": "JVNDB",
        "id": "JVNDB-2020-001451"
      },
      {
        "db": "PACKETSTORM",
        "id": "160624"
      },
      {
        "db": "PACKETSTORM",
        "id": "160889"
      },
      {
        "db": "PACKETSTORM",
        "id": "160125"
      },
      {
        "db": "PACKETSTORM",
        "id": "159661"
      },
      {
        "db": "PACKETSTORM",
        "id": "161546"
      },
      {
        "db": "PACKETSTORM",
        "id": "161548"
      },
      {
        "db": "PACKETSTORM",
        "id": "161916"
      },
      {
        "db": "PACKETSTORM",
        "id": "160961"
      },
      {
        "db": "CNNVD",
        "id": "CNNVD-202001-965"
      },
      {
        "db": "NVD",
        "id": "CVE-2020-7595"
      }
    ]
  },
  "id": "VAR-202001-1866",
  "iot": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/iot#",
      "sources": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/sources#"
        }
      }
    },
    "data": true,
    "sources": [
      {
        "db": "VULHUB",
        "id": "VHN-185720"
      }
    ],
    "trust": 0.01
  },
  "last_update_date": "2024-07-23T19:54:45.829000Z",
  "patch": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/patch#",
      "data": {
        "@container": "@list"
      },
      "sources": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/sources#"
        }
      }
    },
    "data": [
      {
        "title": "0e1a49c8",
        "trust": 0.8,
        "url": "https://gitlab.gnome.org/gnome/libxml2/commit/0e1a49c89076"
      },
      {
        "title": "libxml2 Security vulnerabilities",
        "trust": 0.6,
        "url": "http://123.124.177.30/web/xxk/bdxqbyid.tag?id=109237"
      },
      {
        "title": "Debian CVElist Bug Report Logs: libxml2: CVE-2020-7595",
        "trust": 0.1,
        "url": "https://vulmon.com/vendoradvisory?qidtp=debian_cvelist_bugreportlogs\u0026qid=8128495aba3a49b2f3e0b9ee0e8401af"
      },
      {
        "title": "Ubuntu Security Notice: libxml2 vulnerabilities",
        "trust": 0.1,
        "url": "https://vulmon.com/vendoradvisory?qidtp=ubuntu_security_notice\u0026qid=usn-4274-1"
      },
      {
        "title": "Red Hat: Moderate: libxml2 security update",
        "trust": 0.1,
        "url": "https://vulmon.com/vendoradvisory?qidtp=red_hat_security_advisories\u0026qid=rhsa-20204479 - security advisory"
      },
      {
        "title": "Red Hat: Moderate: libxml2 security and bug fix update",
        "trust": 0.1,
        "url": "https://vulmon.com/vendoradvisory?qidtp=red_hat_security_advisories\u0026qid=rhsa-20203996 - security advisory"
      },
      {
        "title": "Arch Linux Issues: ",
        "trust": 0.1,
        "url": "https://vulmon.com/vendoradvisory?qidtp=arch_linux_issues\u0026qid=cve-2020-7595 log"
      },
      {
        "title": "Red Hat: Important: Red Hat JBoss Core Services Apache HTTP Server 2.4.37 SP3 security update",
        "trust": 0.1,
        "url": "https://vulmon.com/vendoradvisory?qidtp=red_hat_security_advisories\u0026qid=rhsa-20202646 - security advisory"
      },
      {
        "title": "Red Hat: Important: Red Hat JBoss Core Services Apache HTTP Server 2.4.37 SP3 security update",
        "trust": 0.1,
        "url": "https://vulmon.com/vendoradvisory?qidtp=red_hat_security_advisories\u0026qid=rhsa-20202644 - security advisory"
      },
      {
        "title": "Amazon Linux AMI: ALAS-2020-1438",
        "trust": 0.1,
        "url": "https://vulmon.com/vendoradvisory?qidtp=amazon_linux_ami\u0026qid=alas-2020-1438"
      },
      {
        "title": "Arch Linux Advisories: [ASA-202011-15] libxml2: multiple issues",
        "trust": 0.1,
        "url": "https://vulmon.com/vendoradvisory?qidtp=arch_linux_advisories\u0026qid=asa-202011-15"
      },
      {
        "title": "Amazon Linux 2: ALAS2-2020-1534",
        "trust": 0.1,
        "url": "https://vulmon.com/vendoradvisory?qidtp=amazon_linux2\u0026qid=alas2-2020-1534"
      },
      {
        "title": "Siemens Security Advisories: Siemens Security Advisory",
        "trust": 0.1,
        "url": "https://vulmon.com/vendoradvisory?qidtp=siemens_security_advisories\u0026qid=0d160980ab72db34060d62c89304b6f2"
      },
      {
        "title": "Red Hat: Moderate: Release of OpenShift Serverless 1.11.0",
        "trust": 0.1,
        "url": "https://vulmon.com/vendoradvisory?qidtp=red_hat_security_advisories\u0026qid=rhsa-20205149 - security advisory"
      },
      {
        "title": "Red Hat: Moderate: security update - Red Hat Ansible Tower 3.6 runner release (CVE-2019-18874)",
        "trust": 0.1,
        "url": "https://vulmon.com/vendoradvisory?qidtp=red_hat_security_advisories\u0026qid=rhsa-20204255 - security advisory"
      },
      {
        "title": "Red Hat: Moderate: security update - Red Hat Ansible Tower 3.7 runner release (CVE-2019-18874)",
        "trust": 0.1,
        "url": "https://vulmon.com/vendoradvisory?qidtp=red_hat_security_advisories\u0026qid=rhsa-20204254 - security advisory"
      },
      {
        "title": "Red Hat: Moderate: Release of OpenShift Serverless 1.12.0",
        "trust": 0.1,
        "url": "https://vulmon.com/vendoradvisory?qidtp=red_hat_security_advisories\u0026qid=rhsa-20210146 - security advisory"
      },
      {
        "title": "Red Hat: Low: OpenShift Container Platform 4.3.40 security and bug fix update",
        "trust": 0.1,
        "url": "https://vulmon.com/vendoradvisory?qidtp=red_hat_security_advisories\u0026qid=rhsa-20204264 - security advisory"
      },
      {
        "title": "Red Hat: Moderate: OpenShift Container Platform 4.6 compliance-operator security and bug fix update",
        "trust": 0.1,
        "url": "https://vulmon.com/vendoradvisory?qidtp=red_hat_security_advisories\u0026qid=rhsa-20210190 - security advisory"
      },
      {
        "title": "Red Hat: Moderate: OpenShift Container Platform 4.6 compliance-operator security and bug fix update",
        "trust": 0.1,
        "url": "https://vulmon.com/vendoradvisory?qidtp=red_hat_security_advisories\u0026qid=rhsa-20210436 - security advisory"
      },
      {
        "title": "Red Hat: Moderate: Red Hat Quay v3.3.3 bug fix and security update",
        "trust": 0.1,
        "url": "https://vulmon.com/vendoradvisory?qidtp=red_hat_security_advisories\u0026qid=rhsa-20210050 - security advisory"
      },
      {
        "title": "IBM: Security Bulletin:  IBM Security Guardium is affected by multiple vulnerabilities",
        "trust": 0.1,
        "url": "https://vulmon.com/vendoradvisory?qidtp=ibm_psirt_blog\u0026qid=3201548b0e11fd3ecd83fd36fc045a8e"
      },
      {
        "title": "Red Hat: Moderate: Red Hat OpenShift Container Storage 4.6.0 security, bug fix, enhancement update",
        "trust": 0.1,
        "url": "https://vulmon.com/vendoradvisory?qidtp=red_hat_security_advisories\u0026qid=rhsa-20205605 - security advisory"
      },
      {
        "title": "Siemens Security Advisories: Siemens Security Advisory",
        "trust": 0.1,
        "url": "https://vulmon.com/vendoradvisory?qidtp=siemens_security_advisories\u0026qid=ec6577109e640dac19a6ddb978afe82d"
      },
      {
        "title": "",
        "trust": 0.1,
        "url": "https://github.com/vincent-deng/veracode-container-security-finding-parser "
      }
    ],
    "sources": [
      {
        "db": "VULMON",
        "id": "CVE-2020-7595"
      },
      {
        "db": "JVNDB",
        "id": "JVNDB-2020-001451"
      },
      {
        "db": "CNNVD",
        "id": "CNNVD-202001-965"
      }
    ]
  },
  "problemtype_data": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/problemtype_data#",
      "sources": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/sources#"
        }
      }
    },
    "data": [
      {
        "problemtype": "CWE-835",
        "trust": 1.1
      },
      {
        "problemtype": "infinite loop (CWE-835) [NVD Evaluation ]",
        "trust": 0.8
      }
    ],
    "sources": [
      {
        "db": "VULHUB",
        "id": "VHN-185720"
      },
      {
        "db": "JVNDB",
        "id": "JVNDB-2020-001451"
      },
      {
        "db": "NVD",
        "id": "CVE-2020-7595"
      }
    ]
  },
  "references": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/references#",
      "data": {
        "@container": "@list"
      },
      "sources": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/sources#"
        }
      }
    },
    "data": [
      {
        "trust": 2.5,
        "url": "https://usn.ubuntu.com/4274-1/"
      },
      {
        "trust": 2.4,
        "url": "https://us-cert.cisa.gov/ics/advisories/icsa-21-103-08"
      },
      {
        "trust": 2.4,
        "url": "https://www.oracle.com/security-alerts/cpujul2020.html"
      },
      {
        "trust": 1.8,
        "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-292794.pdf"
      },
      {
        "trust": 1.8,
        "url": "https://security.netapp.com/advisory/ntap-20200702-0005/"
      },
      {
        "trust": 1.8,
        "url": "https://security.gentoo.org/glsa/202010-04"
      },
      {
        "trust": 1.8,
        "url": "https://gitlab.gnome.org/gnome/libxml2/commit/0e1a49c89076"
      },
      {
        "trust": 1.8,
        "url": "https://www.oracle.com/security-alerts/cpuapr2022.html"
      },
      {
        "trust": 1.8,
        "url": "https://www.oracle.com/security-alerts/cpujul2022.html"
      },
      {
        "trust": 1.8,
        "url": "https://www.oracle.com/security-alerts/cpuoct2021.html"
      },
      {
        "trust": 1.8,
        "url": "https://lists.debian.org/debian-lts-announce/2020/09/msg00009.html"
      },
      {
        "trust": 1.8,
        "url": "http://lists.opensuse.org/opensuse-security-announce/2020-05/msg00047.html"
      },
      {
        "trust": 1.5,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-7595"
      },
      {
        "trust": 1.4,
        "url": "https://access.redhat.com/security/cve/cve-2020-7595"
      },
      {
        "trust": 1.1,
        "url": "https://lists.fedoraproject.org/archives/list/package-announce%40lists.fedoraproject.org/message/545spoi3zppnpx4tfrive4jvrtjrkull/"
      },
      {
        "trust": 1.1,
        "url": "https://lists.fedoraproject.org/archives/list/package-announce%40lists.fedoraproject.org/message/5r55zr52rmbx24tqtwhciwkjvrv6yawi/"
      },
      {
        "trust": 1.1,
        "url": "https://lists.fedoraproject.org/archives/list/package-announce%40lists.fedoraproject.org/message/jdpf3aavkuakdyfmfksiqsvvs3eefpqh/"
      },
      {
        "trust": 0.8,
        "url": "https://jvn.jp/vu/jvnvu96269392/index.html"
      },
      {
        "trust": 0.8,
        "url": "https://access.redhat.com/security/cve/cve-2019-20388"
      },
      {
        "trust": 0.8,
        "url": "https://bugzilla.redhat.com/):"
      },
      {
        "trust": 0.8,
        "url": "https://access.redhat.com/security/team/contact/"
      },
      {
        "trust": 0.8,
        "url": "https://access.redhat.com/security/cve/cve-2019-19956"
      },
      {
        "trust": 0.8,
        "url": "https://access.redhat.com/security/cve/cve-2019-15903"
      },
      {
        "trust": 0.8,
        "url": "https://access.redhat.com/security/cve/cve-2018-20843"
      },
      {
        "trust": 0.8,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2018-20843"
      },
      {
        "trust": 0.7,
        "url": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/5r55zr52rmbx24tqtwhciwkjvrv6yawi/"
      },
      {
        "trust": 0.7,
        "url": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/545spoi3zppnpx4tfrive4jvrtjrkull/"
      },
      {
        "trust": 0.7,
        "url": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/jdpf3aavkuakdyfmfksiqsvvs3eefpqh/"
      },
      {
        "trust": 0.6,
        "url": "https://access.redhat.com/security/cve/cve-2019-20907"
      },
      {
        "trust": 0.6,
        "url": "https://access.redhat.com/security/cve/cve-2019-13050"
      },
      {
        "trust": 0.6,
        "url": "https://access.redhat.com/security/cve/cve-2019-20218"
      },
      {
        "trust": 0.6,
        "url": "https://access.redhat.com/security/cve/cve-2019-19221"
      },
      {
        "trust": 0.6,
        "url": "https://access.redhat.com/security/cve/cve-2020-1751"
      },
      {
        "trust": 0.6,
        "url": "https://access.redhat.com/security/cve/cve-2019-16168"
      },
      {
        "trust": 0.6,
        "url": "https://access.redhat.com/security/cve/cve-2020-9327"
      },
      {
        "trust": 0.6,
        "url": "https://access.redhat.com/security/cve/cve-2019-16935"
      },
      {
        "trust": 0.6,
        "url": "https://access.redhat.com/security/cve/cve-2019-5018"
      },
      {
        "trust": 0.6,
        "url": "https://access.redhat.com/security/cve/cve-2020-1730"
      },
      {
        "trust": 0.6,
        "url": "https://access.redhat.com/security/cve/cve-2019-19906"
      },
      {
        "trust": 0.6,
        "url": "https://access.redhat.com/security/cve/cve-2019-20387"
      },
      {
        "trust": 0.6,
        "url": "https://access.redhat.com/security/cve/cve-2020-1752"
      },
      {
        "trust": 0.6,
        "url": "https://access.redhat.com/security/cve/cve-2020-8492"
      },
      {
        "trust": 0.6,
        "url": "https://access.redhat.com/security/cve/cve-2019-20454"
      },
      {
        "trust": 0.6,
        "url": "https://access.redhat.com/security/cve/cve-2019-13627"
      },
      {
        "trust": 0.6,
        "url": "https://access.redhat.com/security/cve/cve-2020-6405"
      },
      {
        "trust": 0.6,
        "url": "https://access.redhat.com/security/cve/cve-2019-14889"
      },
      {
        "trust": 0.6,
        "url": "https://access.redhat.com/security/cve/cve-2020-13632"
      },
      {
        "trust": 0.6,
        "url": "https://access.redhat.com/security/cve/cve-2020-10029"
      },
      {
        "trust": 0.6,
        "url": "https://access.redhat.com/security/cve/cve-2020-13630"
      },
      {
        "trust": 0.6,
        "url": "https://access.redhat.com/security/updates/classification/#moderate"
      },
      {
        "trust": 0.6,
        "url": "https://access.redhat.com/security/cve/cve-2020-13631"
      },
      {
        "trust": 0.6,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-19956"
      },
      {
        "trust": 0.6,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-20388"
      },
      {
        "trust": 0.6,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-15903"
      },
      {
        "trust": 0.6,
        "url": "https://www.ibm.com/support/pages/node/6455281"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2020.3535/"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2020.0902/"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2020.3248/"
      },
      {
        "trust": 0.6,
        "url": "https://www.cybersecurity-help.cz/vdb/sb2021052216"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2020.2162/"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2021.1727"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2021.1207"
      },
      {
        "trust": 0.6,
        "url": "https://www.ibm.com/blogs/psirt/security-bulletin-ibm-mq-appliance-is-affected-by-libxml2-vulnerabilities-cve-2019-19956-cve-2019-20388-cve-2020-7595/"
      },
      {
        "trust": 0.6,
        "url": "https://www.ibm.com/blogs/psirt/security-bulletin-ibm-security-guardium-is-affected-by-multiple-vulnerabilities-4/"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2021.0171/"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2021.3072"
      },
      {
        "trust": 0.6,
        "url": "https://www.ibm.com/blogs/psirt/security-bulletin-ibm-bladecenter-advanced-management-module-amm-is-affected-by-vulnerabilities-in-libxml2/"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2020.4100/"
      },
      {
        "trust": 0.6,
        "url": "https://www.ibm.com/support/pages/node/6520474"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2021.0845"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2021.0691"
      },
      {
        "trust": 0.6,
        "url": "https://packetstormsecurity.com/files/162694/red-hat-security-advisory-2021-2021-01.html"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2021.0099/"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2021.4058"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2020.1638/"
      },
      {
        "trust": 0.6,
        "url": "https://vigilance.fr/vulnerability/libxml2-infinite-loop-via-xmlstringlendecodeentities-31396"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2020.3868/"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2021.1744"
      },
      {
        "trust": 0.6,
        "url": "https://www.cybersecurity-help.cz/vdb/sb2022072097"
      },
      {
        "trust": 0.6,
        "url": "https://packetstormsecurity.com/files/158168/red-hat-security-advisory-2020-2646-01.html"
      },
      {
        "trust": 0.6,
        "url": "https://www.cybersecurity-help.cz/vdb/sb2021111735"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2021.0319/"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2020.0471/"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2020.4513/"
      },
      {
        "trust": 0.6,
        "url": "https://www.ibm.com/blogs/psirt/security-bulletin-ibm-qradar-network-security-is-affected-by-multiple-vulnerabilities-2/"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2021.0234/"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2021.0584"
      },
      {
        "trust": 0.6,
        "url": "https://www.ibm.com/blogs/psirt/security-bulletin-ibm-security-guardium-is-affected-by-multiple-vulnerabilities-6/"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2021.1193"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2020.1564/"
      },
      {
        "trust": 0.6,
        "url": "https://www.ibm.com/blogs/psirt/security-bulletin-ibm-flex-system-chassis-management-module-cmm-is-affected-by-vulnerabilities-in-libxml2/"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2021.0864"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2023.3732"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2021.0986"
      },
      {
        "trust": 0.6,
        "url": "https://www.ibm.com/blogs/psirt/security-bulletin-ibm-bootable-media-creator-bomc-is-affected-by-vulnerabilities-in-libxml2/"
      },
      {
        "trust": 0.6,
        "url": "https://packetstormsecurity.com/files/159349/red-hat-security-advisory-2020-3996-01.html"
      },
      {
        "trust": 0.6,
        "url": "https://www.ibm.com/blogs/psirt/security-bulletin-ibm-qradar-siem-is-vulnerable-to-using-components-with-known-vulnerabilities-6/"
      },
      {
        "trust": 0.6,
        "url": "https://www.cybersecurity-help.cz/vdb/sb2021091331"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2021.2604"
      },
      {
        "trust": 0.6,
        "url": "https://packetstormsecurity.com/files/159851/red-hat-security-advisory-2020-4479-01.html"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2021.1242"
      },
      {
        "trust": 0.6,
        "url": "https://www.cybersecurity-help.cz/vdb/sb2021041514"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2020.1826/"
      },
      {
        "trust": 0.6,
        "url": "https://packetstormsecurity.com/files/159639/gentoo-linux-security-advisory-202010-04.html"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2020.3102/"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2022.3550"
      },
      {
        "trust": 0.6,
        "url": "https://packetstormsecurity.com/files/161916/red-hat-security-advisory-2021-0949-01.html"
      },
      {
        "trust": 0.6,
        "url": "https://www.ibm.com/blogs/psirt/security-bulletin-ibm-rackswitch-firmware-products-are-affected-by-vulnerabilities-in-libxml2/"
      },
      {
        "trust": 0.6,
        "url": "https://www.ibm.com/blogs/psirt/security-bulletin-ibm-security-guardium-is-affected-by-multiple-vulnerabilities-5/"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2020.3631/"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2020.3364/"
      },
      {
        "trust": 0.5,
        "url": "https://www.redhat.com/mailman/listinfo/rhsa-announce"
      },
      {
        "trust": 0.5,
        "url": "https://access.redhat.com/security/cve/cve-2019-20916"
      },
      {
        "trust": 0.5,
        "url": "https://access.redhat.com/security/cve/cve-2020-14422"
      },
      {
        "trust": 0.5,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-13050"
      },
      {
        "trust": 0.5,
        "url": "https://access.redhat.com/security/cve/cve-2020-1971"
      },
      {
        "trust": 0.4,
        "url": "https://access.redhat.com/security/cve/cve-2019-15165"
      },
      {
        "trust": 0.4,
        "url": "https://access.redhat.com/security/cve/cve-2020-14382"
      },
      {
        "trust": 0.4,
        "url": "https://access.redhat.com/security/cve/cve-2020-8177"
      },
      {
        "trust": 0.4,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-20454"
      },
      {
        "trust": 0.4,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-20907"
      },
      {
        "trust": 0.4,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-19906"
      },
      {
        "trust": 0.4,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-5018"
      },
      {
        "trust": 0.4,
        "url": "https://access.redhat.com/security/cve/cve-2020-24659"
      },
      {
        "trust": 0.4,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-14889"
      },
      {
        "trust": 0.4,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-20387"
      },
      {
        "trust": 0.4,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-13627"
      },
      {
        "trust": 0.4,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-19221"
      },
      {
        "trust": 0.4,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-16935"
      },
      {
        "trust": 0.4,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-16168"
      },
      {
        "trust": 0.4,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-20218"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-9925"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-9802"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-9895"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2019-8625"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2019-8812"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-3899"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2019-8819"
      },
      {
        "trust": 0.3,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-11068"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-3867"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2019-8720"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-9893"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2019-8808"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-3902"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2019-18197"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-3900"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-9805"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2019-8820"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-9807"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2019-8769"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2019-8710"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2019-8813"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-9850"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2019-8811"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-9803"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-9862"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-3885"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-15503"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-10018"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2019-8835"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2019-8764"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2019-8844"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-3865"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-3864"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-14391"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-3862"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-3901"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2019-8823"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-3895"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-11793"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-9894"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2019-8816"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-9843"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2019-8771"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-3897"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-9806"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2019-8814"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2019-8743"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-9915"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2019-8815"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2019-8783"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2019-20807"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-14040"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2019-11068"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2019-8766"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2019-8846"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-3868"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-3894"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2019-8782"
      },
      {
        "trust": 0.3,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-20916"
      },
      {
        "trust": 0.3,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-13631"
      },
      {
        "trust": 0.3,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-10029"
      },
      {
        "trust": 0.3,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-13630"
      },
      {
        "trust": 0.3,
        "url": "https://listman.redhat.com/mailman/listinfo/rhsa-announce"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2018-16300"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2018-14466"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2018-10105"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2019-15166"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2018-16230"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2018-14467"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2018-10103"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2018-14469"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2018-16229"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2018-14465"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2018-14882"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2018-16227"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2018-14461"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2018-14881"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2018-14464"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2018-14463"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2018-16228"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2018-14879"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2018-14469"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2018-10105"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2018-14880"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2019-1551"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2018-14461"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2018-14468"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2018-14466"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2018-14882"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2018-16227"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2018-14464"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2018-16452"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2018-16230"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2018-14468"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2018-14467"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2018-14462"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2018-14880"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2018-14881"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2018-16300"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2018-14462"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2018-16229"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2018-16451"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2018-10103"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2018-16228"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2018-14463"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2018-16451"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2018-14879"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2020-14019"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2018-14470"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2018-14470"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2018-14465"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2018-16452"
      },
      {
        "trust": 0.2,
        "url": "https://issues.jboss.org/):"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-15165"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-1752"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/documentation/en-us/openshift_container_platform/"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-1730"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/documentation/en-us/openshift_container_platform/4.6/html/serverless_applications/index"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-13632"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-1751"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-17006"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2019-12749"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-14866"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2019-17023"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-17023"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2020-6829"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2020-12403"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-11756"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2019-11756"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2020-12243"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2019-17498"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-12749"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/updates/classification/#low"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2019-17006"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2019-5094"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2020-2752"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2019-20386"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2020-2574"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2019-17546"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2020-12400"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2019-11727"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-11719"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2020-12402"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-5188"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2020-12401"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2019-11719"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2019-14866"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-5094"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-11727"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2019-5188"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-17498"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2020-25211"
      },
      {
        "trust": 0.2,
        "url": "https://docs.openshift.com/container-platform/4.7/release_notes/ocp-4-7-rel"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2019-17450"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/errata/rhsa-2020:5633"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2020-28362"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2020-27813"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-1971"
      },
      {
        "trust": 0.1,
        "url": "https://cwe.mitre.org/data/definitions/835.html"
      },
      {
        "trust": 0.1,
        "url": "https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=949582"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-18609"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/articles/11258"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-16845"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/documentation/en-us/red_hat_openshift_container_s"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/errata/rhsa-2020:5605"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-25660"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-15586"
      },
      {
        "trust": 0.1,
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1885700]"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-7720"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-8237"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/errata/rhsa-2021:0050"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-8771"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-27831"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-8743"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-8710"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-8769"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-27832"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-8764"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-20807"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-8720"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-8625"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-8766"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/errata/rhsa-2020:5149"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-1551"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-14040"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-14422"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/errata/rhsa-2020:4264"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-2974"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-19126"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2017-12652"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-18197"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-5482"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-14973"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-2226"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-2780"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-12450"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-2974"
      },
      {
        "trust": 0.1,
        "url": "https://docs.openshift.com/container-platform/4.3/release_notes/ocp-4-3-rel"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-14352"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-14822"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-14822"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-2225"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-5482"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-12825"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2017-18190"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-14973"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-8696"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-2181"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2017-12652"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-12450"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-2182"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-17546"
      },
      {
        "trust": 0.1,
        "url": "https://docs.openshift.com/container-platform/4.3/updating/updating-cluster"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-8675"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-20386"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2017-18190"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-24750"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-2224"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-9283"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-19126"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-2812"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-19770"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-11668"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-25662"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-8624"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-25684"
      },
      {
        "trust": 0.1,
        "url": "https://docs.openshift.com/container-platform/4.7/updating/updating-cluster"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-24490"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2021-2007"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-19072"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-8649"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-26160"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-12655"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-9458"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-13225"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-13249"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-27846"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-19068"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-20636"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-15925"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-18808"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-18809"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2018-14553"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-20054"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-8623"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-12826"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-8566"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-15862"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-25683"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-19602"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-10773"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-25661"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-10749"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-25641"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-6977"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-8647"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-29652"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-15917"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-16166"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-10774"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-7774"
      },
      {
        "trust": 0.1,
        "url": "https://\u0027"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-0305"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-12659"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-1716"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-20812"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-15157"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-6978"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-25658"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-0444"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-16233"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-25694"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2018-14553"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-15999"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-19543"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-25682"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-10751"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-3884"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-10763"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-10942"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-8622"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-19062"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-19046"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-12465"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-19447"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-25696"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-25685"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-16231"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-14381"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-19056"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-19524"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-8648"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-12770"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-19767"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2021-3121"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-19533"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-25686"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-19537"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-2922"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-25687"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-16167"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-9455"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-11565"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-19332"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-12614"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-25681"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-19063"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-8619"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-19319"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-8563"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-10732"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-3898"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/errata/rhsa-2020:5634"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-10726"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-17450"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-10723"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-10725"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-10723"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-10725"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-10722"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-10722"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-10726"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/errata/rhsa-2020:5364"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-12401"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/errata/rhsa-2021:0949"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-12243"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-12400"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-12402"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-8177"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-12403"
      },
      {
        "trust": 0.1,
        "url": "https://docs.openshift.com/container-platform/4.4/cli_reference/openshift_developer_cli/installing-odo.html"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-6829"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/errata/rhsa-2021:0146"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-28362"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-24553"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-24553"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-24659"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-28366"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-28366"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-28367"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-28367"
      }
    ],
    "sources": [
      {
        "db": "VULHUB",
        "id": "VHN-185720"
      },
      {
        "db": "VULMON",
        "id": "CVE-2020-7595"
      },
      {
        "db": "JVNDB",
        "id": "JVNDB-2020-001451"
      },
      {
        "db": "PACKETSTORM",
        "id": "160624"
      },
      {
        "db": "PACKETSTORM",
        "id": "160889"
      },
      {
        "db": "PACKETSTORM",
        "id": "160125"
      },
      {
        "db": "PACKETSTORM",
        "id": "159661"
      },
      {
        "db": "PACKETSTORM",
        "id": "161546"
      },
      {
        "db": "PACKETSTORM",
        "id": "161548"
      },
      {
        "db": "PACKETSTORM",
        "id": "161916"
      },
      {
        "db": "PACKETSTORM",
        "id": "160961"
      },
      {
        "db": "CNNVD",
        "id": "CNNVD-202001-965"
      },
      {
        "db": "NVD",
        "id": "CVE-2020-7595"
      }
    ]
  },
  "sources": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/sources#",
      "data": {
        "@container": "@list"
      }
    },
    "data": [
      {
        "db": "VULHUB",
        "id": "VHN-185720"
      },
      {
        "db": "VULMON",
        "id": "CVE-2020-7595"
      },
      {
        "db": "JVNDB",
        "id": "JVNDB-2020-001451"
      },
      {
        "db": "PACKETSTORM",
        "id": "160624"
      },
      {
        "db": "PACKETSTORM",
        "id": "160889"
      },
      {
        "db": "PACKETSTORM",
        "id": "160125"
      },
      {
        "db": "PACKETSTORM",
        "id": "159661"
      },
      {
        "db": "PACKETSTORM",
        "id": "161546"
      },
      {
        "db": "PACKETSTORM",
        "id": "161548"
      },
      {
        "db": "PACKETSTORM",
        "id": "161916"
      },
      {
        "db": "PACKETSTORM",
        "id": "160961"
      },
      {
        "db": "CNNVD",
        "id": "CNNVD-202001-965"
      },
      {
        "db": "NVD",
        "id": "CVE-2020-7595"
      }
    ]
  },
  "sources_release_date": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/sources_release_date#",
      "data": {
        "@container": "@list"
      }
    },
    "data": [
      {
        "date": "2020-01-21T00:00:00",
        "db": "VULHUB",
        "id": "VHN-185720"
      },
      {
        "date": "2020-01-21T00:00:00",
        "db": "VULMON",
        "id": "CVE-2020-7595"
      },
      {
        "date": "2020-02-07T00:00:00",
        "db": "JVNDB",
        "id": "JVNDB-2020-001451"
      },
      {
        "date": "2020-12-18T19:14:41",
        "db": "PACKETSTORM",
        "id": "160624"
      },
      {
        "date": "2021-01-11T16:29:48",
        "db": "PACKETSTORM",
        "id": "160889"
      },
      {
        "date": "2020-11-18T20:48:43",
        "db": "PACKETSTORM",
        "id": "160125"
      },
      {
        "date": "2020-10-21T15:40:32",
        "db": "PACKETSTORM",
        "id": "159661"
      },
      {
        "date": "2021-02-25T15:29:25",
        "db": "PACKETSTORM",
        "id": "161546"
      },
      {
        "date": "2021-02-25T15:30:03",
        "db": "PACKETSTORM",
        "id": "161548"
      },
      {
        "date": "2021-03-22T15:36:55",
        "db": "PACKETSTORM",
        "id": "161916"
      },
      {
        "date": "2021-01-15T15:06:55",
        "db": "PACKETSTORM",
        "id": "160961"
      },
      {
        "date": "2020-01-21T00:00:00",
        "db": "CNNVD",
        "id": "CNNVD-202001-965"
      },
      {
        "date": "2020-01-21T23:15:13.867000",
        "db": "NVD",
        "id": "CVE-2020-7595"
      }
    ]
  },
  "sources_update_date": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/sources_update_date#",
      "data": {
        "@container": "@list"
      }
    },
    "data": [
      {
        "date": "2022-07-25T00:00:00",
        "db": "VULHUB",
        "id": "VHN-185720"
      },
      {
        "date": "2023-11-07T00:00:00",
        "db": "VULMON",
        "id": "CVE-2020-7595"
      },
      {
        "date": "2021-06-16T04:57:00",
        "db": "JVNDB",
        "id": "JVNDB-2020-001451"
      },
      {
        "date": "2023-06-30T00:00:00",
        "db": "CNNVD",
        "id": "CNNVD-202001-965"
      },
      {
        "date": "2023-11-07T03:26:07.513000",
        "db": "NVD",
        "id": "CVE-2020-7595"
      }
    ]
  },
  "threat_type": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/threat_type#",
      "sources": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/sources#"
        }
      }
    },
    "data": "remote",
    "sources": [
      {
        "db": "PACKETSTORM",
        "id": "160624"
      },
      {
        "db": "CNNVD",
        "id": "CNNVD-202001-965"
      }
    ],
    "trust": 0.7
  },
  "title": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/title#",
      "sources": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/sources#"
        }
      }
    },
    "data": "libxml2\u00a0 Infinite loop vulnerability in",
    "sources": [
      {
        "db": "JVNDB",
        "id": "JVNDB-2020-001451"
      }
    ],
    "trust": 0.8
  },
  "type": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/type#",
      "sources": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/sources#"
        }
      }
    },
    "data": "other",
    "sources": [
      {
        "db": "CNNVD",
        "id": "CNNVD-202001-965"
      }
    ],
    "trust": 0.6
  }
}

{
  "document": {
    "aggregate_severity": {
      "text": "hoch"
    },
    "category": "csaf_base",
    "csaf_version": "2.0",
    "distribution": {
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "de-DE",
    "notes": [
      {
        "category": "legal_disclaimer",
        "text": "Das BSI ist als Anbieter f\u00fcr die eigenen, zur Nutzung bereitgestellten Inhalte nach den allgemeinen Gesetzen verantwortlich. Nutzerinnen und Nutzer sind jedoch daf\u00fcr verantwortlich, die Verwendung und/oder die Umsetzung der mit den Inhalten bereitgestellten Informationen sorgf\u00e4ltig im Einzelfall zu pr\u00fcfen."
      },
      {
        "category": "description",
        "text": "Tenable Nessus Network Monitor ist eine L\u00f6sung zur Inventarisierung und \u00dcberwachung von Netzwerkger\u00e4ten und den genutzten Protokollen.",
        "title": "Produktbeschreibung"
      },
      {
        "category": "summary",
        "text": "Ein entfernter, anonymer, authentisierter oder lokaler Angreifer kann mehrere Schwachstellen in Tenable Security Nessus Network Monitor ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren.",
        "title": "Angriff"
      },
      {
        "category": "general",
        "text": "- Sonstiges",
        "title": "Betroffene Betriebssysteme"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "csaf-provider@cert-bund.de",
      "name": "Bundesamt f\u00fcr Sicherheit in der Informationstechnik",
      "namespace": "https://www.bsi.bund.de"
    },
    "references": [
      {
        "category": "self",
        "summary": "WID-SEC-W-2023-1614 - CSAF Version",
        "url": "https://wid.cert-bund.de/.well-known/csaf/white/2023/wid-sec-w-2023-1614.json"
      },
      {
        "category": "self",
        "summary": "WID-SEC-2023-1614 - Portal Version",
        "url": "https://wid.cert-bund.de/portal/wid/securityadvisory?name=WID-SEC-2023-1614"
      },
      {
        "category": "external",
        "summary": "Tenable Security Advisory TNS-2023-34 vom 2023-10-25",
        "url": "https://de.tenable.com/security/tns-2023-34"
      },
      {
        "category": "external",
        "summary": "Tenable Security Advisory vom 2023-06-29",
        "url": "https://de.tenable.com/security/tns-2023-23"
      }
    ],
    "source_lang": "en-US",
    "title": "Tenable Security Nessus Network Monitor: Mehrere Schwachstellen",
    "tracking": {
      "current_release_date": "2023-10-25T22:00:00.000+00:00",
      "generator": {
        "date": "2024-02-15T17:33:55.765+00:00",
        "engine": {
          "name": "BSI-WID",
          "version": "1.3.0"
        }
      },
      "id": "WID-SEC-W-2023-1614",
      "initial_release_date": "2023-06-29T22:00:00.000+00:00",
      "revision_history": [
        {
          "date": "2023-06-29T22:00:00.000+00:00",
          "number": "1",
          "summary": "Initiale Fassung"
        },
        {
          "date": "2023-07-03T22:00:00.000+00:00",
          "number": "2",
          "summary": "Produkt berichtigt"
        },
        {
          "date": "2023-10-25T22:00:00.000+00:00",
          "number": "3",
          "summary": "Neue Updates von Tenable aufgenommen"
        }
      ],
      "status": "final",
      "version": "3"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "category": "product_name",
            "name": "Tenable Security Nessus Network Monitor \u003c 6.2.2",
            "product": {
              "name": "Tenable Security Nessus Network Monitor \u003c 6.2.2",
              "product_id": "T028403",
              "product_identification_helper": {
                "cpe": "cpe:/a:tenable:nessus_network_monitor:6.2.2"
              }
            }
          }
        ],
        "category": "vendor",
        "name": "Tenable Security"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2023-32067",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-32067"
    },
    {
      "cve": "CVE-2023-31147",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-31147"
    },
    {
      "cve": "CVE-2023-31130",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-31130"
    },
    {
      "cve": "CVE-2023-31124",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-31124"
    },
    {
      "cve": "CVE-2023-29469",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-29469"
    },
    {
      "cve": "CVE-2023-28484",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-28484"
    },
    {
      "cve": "CVE-2023-28322",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-28322"
    },
    {
      "cve": "CVE-2023-28321",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-28321"
    },
    {
      "cve": "CVE-2023-28320",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-28320"
    },
    {
      "cve": "CVE-2023-27538",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-27538"
    },
    {
      "cve": "CVE-2023-27536",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-27536"
    },
    {
      "cve": "CVE-2023-27535",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-27535"
    },
    {
      "cve": "CVE-2023-27534",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-27534"
    },
    {
      "cve": "CVE-2023-27533",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-27533"
    },
    {
      "cve": "CVE-2023-2650",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-2650"
    },
    {
      "cve": "CVE-2023-23916",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-23916"
    },
    {
      "cve": "CVE-2023-23915",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-23915"
    },
    {
      "cve": "CVE-2023-23914",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-23914"
    },
    {
      "cve": "CVE-2023-1255",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-1255"
    },
    {
      "cve": "CVE-2023-0466",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-0466"
    },
    {
      "cve": "CVE-2023-0465",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-0465"
    },
    {
      "cve": "CVE-2022-4904",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-4904"
    },
    {
      "cve": "CVE-2022-46908",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-46908"
    },
    {
      "cve": "CVE-2022-43552",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-43552"
    },
    {
      "cve": "CVE-2022-43551",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-43551"
    },
    {
      "cve": "CVE-2022-42916",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-42916"
    },
    {
      "cve": "CVE-2022-42915",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-42915"
    },
    {
      "cve": "CVE-2022-40304",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-40304"
    },
    {
      "cve": "CVE-2022-40303",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-40303"
    },
    {
      "cve": "CVE-2022-35737",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-35737"
    },
    {
      "cve": "CVE-2022-35252",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-35252"
    },
    {
      "cve": "CVE-2022-32221",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-32221"
    },
    {
      "cve": "CVE-2022-32208",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-32208"
    },
    {
      "cve": "CVE-2022-32207",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-32207"
    },
    {
      "cve": "CVE-2022-32206",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-32206"
    },
    {
      "cve": "CVE-2022-32205",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-32205"
    },
    {
      "cve": "CVE-2022-31160",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-31160"
    },
    {
      "cve": "CVE-2022-29824",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-29824"
    },
    {
      "cve": "CVE-2022-27782",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-27782"
    },
    {
      "cve": "CVE-2022-27781",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-27781"
    },
    {
      "cve": "CVE-2022-27776",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-27776"
    },
    {
      "cve": "CVE-2022-27775",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-27775"
    },
    {
      "cve": "CVE-2022-27774",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-27774"
    },
    {
      "cve": "CVE-2022-23395",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-23395"
    },
    {
      "cve": "CVE-2022-23308",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-23308"
    },
    {
      "cve": "CVE-2022-22576",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-22576"
    },
    {
      "cve": "CVE-2021-45346",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2021-45346"
    },
    {
      "cve": "CVE-2021-3672",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2021-3672"
    },
    {
      "cve": "CVE-2021-36690",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2021-36690"
    },
    {
      "cve": "CVE-2021-3541",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2021-3541"
    },
    {
      "cve": "CVE-2021-3537",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2021-3537"
    },
    {
      "cve": "CVE-2021-3518",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2021-3518"
    },
    {
      "cve": "CVE-2021-3517",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2021-3517"
    },
    {
      "cve": "CVE-2021-31239",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2021-31239"
    },
    {
      "cve": "CVE-2021-30560",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2021-30560"
    },
    {
      "cve": "CVE-2021-20227",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2021-20227"
    },
    {
      "cve": "CVE-2020-9327",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-9327"
    },
    {
      "cve": "CVE-2020-7595",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-7595"
    },
    {
      "cve": "CVE-2020-35527",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-35527"
    },
    {
      "cve": "CVE-2020-35525",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-35525"
    },
    {
      "cve": "CVE-2020-24977",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-24977"
    },
    {
      "cve": "CVE-2020-15358",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-15358"
    },
    {
      "cve": "CVE-2020-14155",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-14155"
    },
    {
      "cve": "CVE-2020-13871",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-13871"
    },
    {
      "cve": "CVE-2020-13632",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-13632"
    },
    {
      "cve": "CVE-2020-13631",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-13631"
    },
    {
      "cve": "CVE-2020-13630",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-13630"
    },
    {
      "cve": "CVE-2020-13435",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-13435"
    },
    {
      "cve": "CVE-2020-13434",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-13434"
    },
    {
      "cve": "CVE-2020-11656",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-11656"
    },
    {
      "cve": "CVE-2020-11655",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-11655"
    },
    {
      "cve": "CVE-2019-9937",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-9937"
    },
    {
      "cve": "CVE-2019-9936",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-9936"
    },
    {
      "cve": "CVE-2019-8457",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-8457"
    },
    {
      "cve": "CVE-2019-5815",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-5815"
    },
    {
      "cve": "CVE-2019-20838",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-20838"
    },
    {
      "cve": "CVE-2019-20388",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-20388"
    },
    {
      "cve": "CVE-2019-20218",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-20218"
    },
    {
      "cve": "CVE-2019-19959",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19959"
    },
    {
      "cve": "CVE-2019-19956",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19956"
    },
    {
      "cve": "CVE-2019-19926",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19926"
    },
    {
      "cve": "CVE-2019-19925",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19925"
    },
    {
      "cve": "CVE-2019-19924",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19924"
    },
    {
      "cve": "CVE-2019-19923",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19923"
    },
    {
      "cve": "CVE-2019-19880",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19880"
    },
    {
      "cve": "CVE-2019-19646",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19646"
    },
    {
      "cve": "CVE-2019-19645",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19645"
    },
    {
      "cve": "CVE-2019-19603",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19603"
    },
    {
      "cve": "CVE-2019-19317",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19317"
    },
    {
      "cve": "CVE-2019-19244",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19244"
    },
    {
      "cve": "CVE-2019-19242",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19242"
    },
    {
      "cve": "CVE-2019-16168",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-16168"
    },
    {
      "cve": "CVE-2019-13118",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-13118"
    },
    {
      "cve": "CVE-2019-13117",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-13117"
    },
    {
      "cve": "CVE-2019-12900",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-12900"
    },
    {
      "cve": "CVE-2019-11068",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-11068"
    },
    {
      "cve": "CVE-2018-9251",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2018-9251"
    },
    {
      "cve": "CVE-2018-14567",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2018-14567"
    },
    {
      "cve": "CVE-2018-14404",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2018-14404"
    },
    {
      "cve": "CVE-2017-9050",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-9050"
    },
    {
      "cve": "CVE-2017-9049",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-9049"
    },
    {
      "cve": "CVE-2017-9048",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-9048"
    },
    {
      "cve": "CVE-2017-9047",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-9047"
    },
    {
      "cve": "CVE-2017-8872",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-8872"
    },
    {
      "cve": "CVE-2017-7376",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-7376"
    },
    {
      "cve": "CVE-2017-7375",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-7375"
    },
    {
      "cve": "CVE-2017-5969",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-5969"
    },
    {
      "cve": "CVE-2017-5130",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-5130"
    },
    {
      "cve": "CVE-2017-5029",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-5029"
    },
    {
      "cve": "CVE-2017-18258",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-18258"
    },
    {
      "cve": "CVE-2017-16932",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-16932"
    },
    {
      "cve": "CVE-2017-16931",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-16931"
    },
    {
      "cve": "CVE-2017-15412",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-15412"
    },
    {
      "cve": "CVE-2017-1000381",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-1000381"
    },
    {
      "cve": "CVE-2017-1000061",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-1000061"
    },
    {
      "cve": "CVE-2016-9598",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-9598"
    },
    {
      "cve": "CVE-2016-9597",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-9597"
    },
    {
      "cve": "CVE-2016-9596",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-9596"
    },
    {
      "cve": "CVE-2016-5180",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-5180"
    },
    {
      "cve": "CVE-2016-5131",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-5131"
    },
    {
      "cve": "CVE-2016-4658",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-4658"
    },
    {
      "cve": "CVE-2016-4609",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-4609"
    },
    {
      "cve": "CVE-2016-4607",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-4607"
    },
    {
      "cve": "CVE-2016-4483",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-4483"
    },
    {
      "cve": "CVE-2016-4449",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-4449"
    },
    {
      "cve": "CVE-2016-4448",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-4448"
    },
    {
      "cve": "CVE-2016-4447",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-4447"
    },
    {
      "cve": "CVE-2016-3709",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-3709"
    },
    {
      "cve": "CVE-2016-3705",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-3705"
    },
    {
      "cve": "CVE-2016-3627",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-3627"
    },
    {
      "cve": "CVE-2016-3189",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-3189"
    },
    {
      "cve": "CVE-2016-2073",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-2073"
    },
    {
      "cve": "CVE-2016-1840",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-1840"
    },
    {
      "cve": "CVE-2016-1839",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-1839"
    },
    {
      "cve": "CVE-2016-1838",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-1838"
    },
    {
      "cve": "CVE-2016-1837",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-1837"
    },
    {
      "cve": "CVE-2016-1836",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-1836"
    },
    {
      "cve": "CVE-2016-1834",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-1834"
    },
    {
      "cve": "CVE-2016-1833",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-1833"
    },
    {
      "cve": "CVE-2016-1762",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-1762"
    },
    {
      "cve": "CVE-2016-1684",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-1684"
    },
    {
      "cve": "CVE-2016-1683",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-1683"
    },
    {
      "cve": "CVE-2015-9019",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-9019"
    },
    {
      "cve": "CVE-2015-8806",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-8806"
    },
    {
      "cve": "CVE-2015-8710",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-8710"
    },
    {
      "cve": "CVE-2015-8317",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-8317"
    },
    {
      "cve": "CVE-2015-8242",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-8242"
    },
    {
      "cve": "CVE-2015-8241",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-8241"
    },
    {
      "cve": "CVE-2015-8035",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-8035"
    },
    {
      "cve": "CVE-2015-7995",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-7995"
    },
    {
      "cve": "CVE-2015-7942",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-7942"
    },
    {
      "cve": "CVE-2015-7941",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-7941"
    },
    {
      "cve": "CVE-2015-7500",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-7500"
    },
    {
      "cve": "CVE-2015-7499",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-7499"
    },
    {
      "cve": "CVE-2015-7498",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-7498"
    },
    {
      "cve": "CVE-2015-7497",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-7497"
    },
    {
      "cve": "CVE-2015-5312",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-5312"
    },
    {
      "cve": "CVE-2014-3660",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2014-3660"
    },
    {
      "cve": "CVE-2013-4520",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2013-4520"
    },
    {
      "cve": "CVE-2013-2877",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2013-2877"
    },
    {
      "cve": "CVE-2013-1969",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2013-1969"
    },
    {
      "cve": "CVE-2013-0339",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2013-0339"
    },
    {
      "cve": "CVE-2013-0338",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2013-0338"
    },
    {
      "cve": "CVE-2012-6139",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2012-6139"
    },
    {
      "cve": "CVE-2012-5134",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2012-5134"
    },
    {
      "cve": "CVE-2012-2871",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2012-2871"
    },
    {
      "cve": "CVE-2012-2870",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2012-2870"
    },
    {
      "cve": "CVE-2012-0841",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2012-0841"
    },
    {
      "cve": "CVE-2011-3970",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2011-3970"
    },
    {
      "cve": "CVE-2011-1944",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2011-1944"
    },
    {
      "cve": "CVE-2011-1202",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2011-1202"
    },
    {
      "cve": "CVE-2010-4494",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2010-4494"
    },
    {
      "cve": "CVE-2010-4008",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2010-4008"
    }
  ]
}

{
  "affected": [
    {
      "package": {
        "ecosystem": "RubyGems",
        "name": "nokogiri"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            },
            {
              "fixed": "1.10.8"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    }
  ],
  "aliases": [
    "CVE-2020-7595"
  ],
  "database_specific": {
    "cwe_ids": [
      "CWE-835"
    ],
    "github_reviewed": true,
    "github_reviewed_at": "2020-02-18T18:58:16Z",
    "nvd_published_at": "2020-01-21T23:15:00Z",
    "severity": "HIGH"
  },
  "details": "xmlStringLenDecodeEntities in parser.c in libxml2 2.9.10 has an infinite loop in a certain end-of-file situation.\nThe Nokogiri RubyGem has patched its vendored copy of libxml2 in order to prevent this issue from affecting nokogiri.",
  "id": "GHSA-7553-jr98-vx47",
  "modified": "2022-04-22T17:29:45Z",
  "published": "2020-02-24T19:12:36Z",
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2020-7595"
    },
    {
      "type": "WEB",
      "url": "https://github.com/sparklemotion/nokogiri/issues/1992"
    },
    {
      "type": "WEB",
      "url": "https://www.oracle.com/security-alerts/cpuoct2021.html"
    },
    {
      "type": "WEB",
      "url": "https://www.oracle.com/security-alerts/cpujul2022.html"
    },
    {
      "type": "WEB",
      "url": "https://www.oracle.com/security-alerts/cpujul2020.html"
    },
    {
      "type": "WEB",
      "url": "https://www.oracle.com/security-alerts/cpuapr2022.html"
    },
    {
      "type": "WEB",
      "url": "https://usn.ubuntu.com/4274-1"
    },
    {
      "type": "WEB",
      "url": "https://us-cert.cisa.gov/ics/advisories/icsa-21-103-08"
    },
    {
      "type": "WEB",
      "url": "https://security.netapp.com/advisory/ntap-20200702-0005"
    },
    {
      "type": "WEB",
      "url": "https://security.gentoo.org/glsa/202010-04"
    },
    {
      "type": "WEB",
      "url": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/JDPF3AAVKUAKDYFMFKSIQSVVS3EEFPQH"
    },
    {
      "type": "WEB",
      "url": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/5R55ZR52RMBX24TQTWHCIWKJVRV6YAWI"
    },
    {
      "type": "WEB",
      "url": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/545SPOI3ZPPNPX4TFRIVE4JVRTJRKULL"
    },
    {
      "type": "WEB",
      "url": "https://lists.debian.org/debian-lts-announce/2020/09/msg00009.html"
    },
    {
      "type": "WEB",
      "url": "https://gitlab.gnome.org/GNOME/libxml2/commit/0e1a49c89076"
    },
    {
      "type": "PACKAGE",
      "url": "https://github.com/sparklemotion/nokogiri"
    },
    {
      "type": "WEB",
      "url": "https://github.com/rubysec/ruby-advisory-db/blob/master/gems/nokogiri/CVE-2020-7595.yml"
    },
    {
      "type": "WEB",
      "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-292794.pdf"
    },
    {
      "type": "WEB",
      "url": "http://lists.opensuse.org/opensuse-security-announce/2020-05/msg00047.html"
    }
  ],
  "schema_version": "1.4.0",
  "severity": [
    {
      "score": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
      "type": "CVSS_V3"
    }
  ],
  "summary": "libxml as used in Nokogiri has an infinite loop in a certain end-of-file situation"
}

{
  "GSD": {
    "alias": "CVE-2020-7595",
    "description": "xmlStringLenDecodeEntities in parser.c in libxml2 2.9.10 has an infinite loop in a certain end-of-file situation.",
    "id": "GSD-2020-7595",
    "references": [
      "https://www.suse.com/security/cve/CVE-2020-7595.html",
      "https://access.redhat.com/errata/RHSA-2020:4479",
      "https://access.redhat.com/errata/RHSA-2020:3996",
      "https://access.redhat.com/errata/RHSA-2020:2646",
      "https://access.redhat.com/errata/RHSA-2020:2644",
      "https://ubuntu.com/security/CVE-2020-7595",
      "https://advisories.mageia.org/CVE-2020-7595.html",
      "https://security.archlinux.org/CVE-2020-7595",
      "https://alas.aws.amazon.com/cve/html/CVE-2020-7595.html",
      "https://linux.oracle.com/cve/CVE-2020-7595.html"
    ]
  },
  "gsd": {
    "metadata": {
      "exploitCode": "unknown",
      "remediation": "unknown",
      "reportConfidence": "confirmed",
      "type": "vulnerability"
    },
    "osvSchema": {
      "affected": [
        {
          "package": {
            "ecosystem": "RubyGems",
            "name": "nokogiri",
            "purl": "pkg:gem/nokogiri"
          }
        }
      ],
      "aliases": [
        "CVE-2020-7595",
        "GHSA-7553-jr98-vx47"
      ],
      "details": "\nNokogiri has backported the patch for CVE-2020-7595 into its vendored version\nof libxml2, and released this as v1.10.8\n\nCVE-2020-7595 has not yet been addressed in an upstream libxml2 release, and\nso Nokogiri versions \u003c= v1.10.7 are vulnerable.",
      "id": "GSD-2020-7595",
      "modified": "2020-02-12T00:00:00.000Z",
      "published": "2020-02-12T00:00:00.000Z",
      "references": [
        {
          "type": "WEB",
          "url": "https://github.com/sparklemotion/nokogiri/issues/1992"
        }
      ],
      "schema_version": "1.4.0",
      "severity": [
        {
          "score": 5.0,
          "type": "CVSS_V2"
        },
        {
          "score": 7.5,
          "type": "CVSS_V3"
        }
      ],
      "summary": "libxml2 2.9.10 has an infinite loop in a certain end-of-file situation"
    }
  },
  "namespaces": {
    "cve.org": {
      "CVE_data_meta": {
        "ASSIGNER": "cve@mitre.org",
        "ID": "CVE-2020-7595",
        "STATE": "PUBLIC"
      },
      "affects": {
        "vendor": {
          "vendor_data": [
            {
              "product": {
                "product_data": [
                  {
                    "product_name": "n/a",
                    "version": {
                      "version_data": [
                        {
                          "version_value": "n/a"
                        }
                      ]
                    }
                  }
                ]
              },
              "vendor_name": "n/a"
            }
          ]
        }
      },
      "data_format": "MITRE",
      "data_type": "CVE",
      "data_version": "4.0",
      "description": {
        "description_data": [
          {
            "lang": "eng",
            "value": "xmlStringLenDecodeEntities in parser.c in libxml2 2.9.10 has an infinite loop in a certain end-of-file situation."
          }
        ]
      },
      "problemtype": {
        "problemtype_data": [
          {
            "description": [
              {
                "lang": "eng",
                "value": "n/a"
              }
            ]
          }
        ]
      },
      "references": {
        "reference_data": [
          {
            "name": "FEDORA-2020-41fe1680f6",
            "refsource": "FEDORA",
            "url": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/545SPOI3ZPPNPX4TFRIVE4JVRTJRKULL/"
          },
          {
            "name": "USN-4274-1",
            "refsource": "UBUNTU",
            "url": "https://usn.ubuntu.com/4274-1/"
          },
          {
            "name": "FEDORA-2020-0c71c00af4",
            "refsource": "FEDORA",
            "url": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/5R55ZR52RMBX24TQTWHCIWKJVRV6YAWI/"
          },
          {
            "name": "FEDORA-2020-7694e8be73",
            "refsource": "FEDORA",
            "url": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/JDPF3AAVKUAKDYFMFKSIQSVVS3EEFPQH/"
          },
          {
            "name": "openSUSE-SU-2020:0681",
            "refsource": "SUSE",
            "url": "http://lists.opensuse.org/opensuse-security-announce/2020-05/msg00047.html"
          },
          {
            "name": "https://www.oracle.com/security-alerts/cpujul2020.html",
            "refsource": "MISC",
            "url": "https://www.oracle.com/security-alerts/cpujul2020.html"
          },
          {
            "name": "https://security.netapp.com/advisory/ntap-20200702-0005/",
            "refsource": "CONFIRM",
            "url": "https://security.netapp.com/advisory/ntap-20200702-0005/"
          },
          {
            "name": "https://gitlab.gnome.org/GNOME/libxml2/commit/0e1a49c89076",
            "refsource": "MISC",
            "url": "https://gitlab.gnome.org/GNOME/libxml2/commit/0e1a49c89076"
          },
          {
            "name": "[debian-lts-announce] 20200909 [SECURITY] [DLA 2369-1] libxml2 security update",
            "refsource": "MLIST",
            "url": "https://lists.debian.org/debian-lts-announce/2020/09/msg00009.html"
          },
          {
            "name": "GLSA-202010-04",
            "refsource": "GENTOO",
            "url": "https://security.gentoo.org/glsa/202010-04"
          },
          {
            "name": "https://www.oracle.com/security-alerts/cpuoct2021.html",
            "refsource": "MISC",
            "url": "https://www.oracle.com/security-alerts/cpuoct2021.html"
          },
          {
            "name": "https://cert-portal.siemens.com/productcert/pdf/ssa-292794.pdf",
            "refsource": "CONFIRM",
            "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-292794.pdf"
          },
          {
            "name": "https://us-cert.cisa.gov/ics/advisories/icsa-21-103-08",
            "refsource": "CONFIRM",
            "url": "https://us-cert.cisa.gov/ics/advisories/icsa-21-103-08"
          },
          {
            "name": "https://www.oracle.com/security-alerts/cpuapr2022.html",
            "refsource": "MISC",
            "url": "https://www.oracle.com/security-alerts/cpuapr2022.html"
          },
          {
            "name": "https://www.oracle.com/security-alerts/cpujul2022.html",
            "refsource": "MISC",
            "url": "https://www.oracle.com/security-alerts/cpujul2022.html"
          }
        ]
      }
    },
    "github.com/rubysec/ruby-advisory-db": {
      "cve": "2020-7595",
      "cvss_v2": 5.0,
      "cvss_v3": 7.5,
      "date": "2020-02-12",
      "description": "\nNokogiri has backported the patch for CVE-2020-7595 into its vendored version\nof libxml2, and released this as v1.10.8\n\nCVE-2020-7595 has not yet been addressed in an upstream libxml2 release, and\nso Nokogiri versions \u003c= v1.10.7 are vulnerable.",
      "gem": "nokogiri",
      "ghsa": "7553-jr98-vx47",
      "patched_versions": [
        "\u003e= 1.10.8"
      ],
      "title": "libxml2 2.9.10 has an infinite loop in a certain end-of-file situation",
      "url": "https://github.com/sparklemotion/nokogiri/issues/1992"
    },
    "gitlab.com": {
      "advisories": [
        {
          "affected_range": "=2.9.10",
          "affected_versions": "Version 2.9.10",
          "cvss_v2": "AV:N/AC:L/Au:N/C:N/I:N/A:P",
          "cvss_v3": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
          "cwe_ids": [
            "CWE-1035",
            "CWE-835",
            "CWE-937"
          ],
          "date": "2021-12-08",
          "description": "`xmlStringLenDecodeEntities` in `parser.c` in libxml2 has an infinite loop in a certain end-of-file situation.",
          "fixed_versions": [
            "2.9.12"
          ],
          "identifier": "CVE-2020-7595",
          "identifiers": [
            "CVE-2020-7595"
          ],
          "not_impacted": "All versions before 2.9.10, all versions after 2.9.10",
          "package_slug": "conan/libxml2",
          "pubdate": "2020-01-21",
          "solution": "Upgrade to version 2.9.12 or above.",
          "title": "Loop with Unreachable Exit Condition (Infinite Loop)",
          "urls": [
            "https://nvd.nist.gov/vuln/detail/CVE-2020-7595"
          ],
          "uuid": "bdeefa5e-b62a-416b-903a-8bdad25d7d89"
        },
        {
          "affected_range": "\u003c1.10.8",
          "affected_versions": "All versions before 1.10.8",
          "cvss_v2": "AV:N/AC:L/Au:N/C:N/I:N/A:P",
          "cvss_v3": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
          "cwe_ids": [
            "CWE-1035",
            "CWE-835",
            "CWE-937"
          ],
          "date": "2021-12-08",
          "description": "`xmlStringLenDecodeEntities` in `parser.c` in libxml2 has an infinite loop in a certain end-of-file situation.",
          "fixed_versions": [
            "1.10.8"
          ],
          "identifier": "CVE-2020-7595",
          "identifiers": [
            "CVE-2020-7595"
          ],
          "not_impacted": "All versions starting from 1.10.8",
          "package_slug": "gem/nokogiri",
          "pubdate": "2020-01-21",
          "solution": "Upgrade to version 1.10.8 or above.",
          "title": "Loop with Unreachable Exit Condition (Infinite Loop)",
          "urls": [
            "https://nvd.nist.gov/vuln/detail/CVE-2020-7595"
          ],
          "uuid": "a50aefc9-9e11-4696-bf0c-e4d0dc418f0b"
        },
        {
          "affected_range": "(,)",
          "affected_versions": "All versions",
          "cvss_v2": "AV:N/AC:L/Au:N/C:N/I:N/A:P",
          "cvss_v3": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
          "cwe_ids": [
            "CWE-1035",
            "CWE-835",
            "CWE-937"
          ],
          "date": "2021-12-08",
          "description": "xmlStringLenDecodeEntities in parser.c in libxml2 has an infinite loop in a certain end-of-file situation.",
          "fixed_versions": [],
          "identifier": "CVE-2020-7595",
          "identifiers": [
            "CVE-2020-7595"
          ],
          "not_impacted": "",
          "package_slug": "nuget/libxml2",
          "pubdate": "2020-01-21",
          "solution": "Unfortunately, there is no solution available yet.",
          "title": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)",
          "urls": [
            "https://nvd.nist.gov/vuln/detail/CVE-2020-7595",
            "https://gitlab.gnome.org/GNOME/libxml2/commit/0e1a49c89076",
            "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/545SPOI3ZPPNPX4TFRIVE4JVRTJRKULL/",
            "https://usn.ubuntu.com/4274-1/",
            "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/5R55ZR52RMBX24TQTWHCIWKJVRV6YAWI/",
            "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/JDPF3AAVKUAKDYFMFKSIQSVVS3EEFPQH/",
            "http://lists.opensuse.org/opensuse-security-announce/2020-05/msg00047.html",
            "https://security.netapp.com/advisory/ntap-20200702-0005/",
            "https://www.oracle.com/security-alerts/cpujul2020.html",
            "https://lists.debian.org/debian-lts-announce/2020/09/msg00009.html",
            "https://security.gentoo.org/glsa/202010-04",
            "https://cert-portal.siemens.com/productcert/pdf/ssa-292794.pdf",
            "https://us-cert.cisa.gov/ics/advisories/icsa-21-103-08",
            "https://www.oracle.com/security-alerts/cpuoct2021.html"
          ],
          "uuid": "eb6d522e-c635-443c-8d33-a241a285b79e"
        }
      ]
    },
    "nvd.nist.gov": {
      "configurations": {
        "CVE_data_version": "4.0",
        "nodes": [
          {
            "children": [],
            "cpe_match": [
              {
                "cpe23Uri": "cpe:2.3:a:xmlsoft:libxml2:2.9.10:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              }
            ],
            "operator": "OR"
          },
          {
            "children": [],
            "cpe_match": [
              {
                "cpe23Uri": "cpe:2.3:o:fedoraproject:fedora:30:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:fedoraproject:fedora:31:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:fedoraproject:fedora:32:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              }
            ],
            "operator": "OR"
          },
          {
            "children": [],
            "cpe_match": [
              {
                "cpe23Uri": "cpe:2.3:o:canonical:ubuntu_linux:16.04:*:*:*:lts:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:canonical:ubuntu_linux:18.04:*:*:*:lts:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:canonical:ubuntu_linux:14.04:*:*:*:esm:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:canonical:ubuntu_linux:19.10:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:canonical:ubuntu_linux:12.04:*:*:*:-:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              }
            ],
            "operator": "OR"
          },
          {
            "children": [],
            "cpe_match": [
              {
                "cpe23Uri": "cpe:2.3:o:debian:debian_linux:9.0:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              }
            ],
            "operator": "OR"
          },
          {
            "children": [],
            "cpe_match": [
              {
                "cpe23Uri": "cpe:2.3:a:siemens:sinema_remote_connect_server:*:*:*:*:*:*:*:*",
                "cpe_name": [],
                "versionEndExcluding": "3.0",
                "vulnerable": true
              }
            ],
            "operator": "OR"
          },
          {
            "children": [],
            "cpe_match": [
              {
                "cpe23Uri": "cpe:2.3:a:netapp:steelstore_cloud_integrated_storage:-:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:a:netapp:clustered_data_ontap:-:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:a:netapp:smi-s_provider:-:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:a:netapp:snapdrive:-:*:*:*:*:windows:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:a:netapp:symantec_netbackup:-:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              }
            ],
            "operator": "OR"
          },
          {
            "children": [
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:o:netapp:h300s_firmware:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": true
                  }
                ],
                "operator": "OR"
              },
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:h:netapp:h300s:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": false
                  }
                ],
                "operator": "OR"
              }
            ],
            "cpe_match": [],
            "operator": "AND"
          },
          {
            "children": [
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:o:netapp:h500s_firmware:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": true
                  }
                ],
                "operator": "OR"
              },
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:h:netapp:h500s:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": false
                  }
                ],
                "operator": "OR"
              }
            ],
            "cpe_match": [],
            "operator": "AND"
          },
          {
            "children": [
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:o:netapp:h700s_firmware:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": true
                  }
                ],
                "operator": "OR"
              },
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:h:netapp:h700s:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": false
                  }
                ],
                "operator": "OR"
              }
            ],
            "cpe_match": [],
            "operator": "AND"
          },
          {
            "children": [
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:o:netapp:h300e_firmware:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": true
                  }
                ],
                "operator": "OR"
              },
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:h:netapp:h300e:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": false
                  }
                ],
                "operator": "OR"
              }
            ],
            "cpe_match": [],
            "operator": "AND"
          },
          {
            "children": [
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:o:netapp:h500e_firmware:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": true
                  }
                ],
                "operator": "OR"
              },
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:h:netapp:h500e:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": false
                  }
                ],
                "operator": "OR"
              }
            ],
            "cpe_match": [],
            "operator": "AND"
          },
          {
            "children": [
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:o:netapp:h700e_firmware:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": true
                  }
                ],
                "operator": "OR"
              },
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:h:netapp:h700e:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": false
                  }
                ],
                "operator": "OR"
              }
            ],
            "cpe_match": [],
            "operator": "AND"
          },
          {
            "children": [
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:o:netapp:h410s_firmware:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": true
                  }
                ],
                "operator": "OR"
              },
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:h:netapp:h410s:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": false
                  }
                ],
                "operator": "OR"
              }
            ],
            "cpe_match": [],
            "operator": "AND"
          },
          {
            "children": [
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:o:netapp:h410c_firmware:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": true
                  }
                ],
                "operator": "OR"
              },
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:h:netapp:h410c:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": false
                  }
                ],
                "operator": "OR"
              }
            ],
            "cpe_match": [],
            "operator": "AND"
          },
          {
            "children": [],
            "cpe_match": [
              {
                "cpe23Uri": "cpe:2.3:a:oracle:real_user_experience_insight:13.3.1.0:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              }
            ],
            "operator": "OR"
          },
          {
            "children": [],
            "cpe_match": [
              {
                "cpe23Uri": "cpe:2.3:a:oracle:peoplesoft_enterprise_peopletools:8.58:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:a:oracle:enterprise_manager_base_platform:13.4.0.0:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:a:oracle:enterprise_manager_ops_center:12.4.0.0:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:a:oracle:enterprise_manager_base_platform:13.5.0.0:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:a:oracle:mysql_workbench:*:*:*:*:*:*:*:*",
                "cpe_name": [],
                "versionEndIncluding": "8.0.26",
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:a:oracle:real_user_experience_insight:13.4.1.0:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:a:oracle:real_user_experience_insight:13.5.1.0:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:a:oracle:communications_cloud_native_core_network_function_cloud_native_environment:1.10.0:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              }
            ],
            "operator": "OR"
          }
        ]
      },
      "cve": {
        "CVE_data_meta": {
          "ASSIGNER": "cve@mitre.org",
          "ID": "CVE-2020-7595"
        },
        "data_format": "MITRE",
        "data_type": "CVE",
        "data_version": "4.0",
        "description": {
          "description_data": [
            {
              "lang": "en",
              "value": "xmlStringLenDecodeEntities in parser.c in libxml2 2.9.10 has an infinite loop in a certain end-of-file situation."
            }
          ]
        },
        "problemtype": {
          "problemtype_data": [
            {
              "description": [
                {
                  "lang": "en",
                  "value": "CWE-835"
                }
              ]
            }
          ]
        },
        "references": {
          "reference_data": [
            {
              "name": "https://gitlab.gnome.org/GNOME/libxml2/commit/0e1a49c89076",
              "refsource": "MISC",
              "tags": [
                "Patch",
                "Third Party Advisory"
              ],
              "url": "https://gitlab.gnome.org/GNOME/libxml2/commit/0e1a49c89076"
            },
            {
              "name": "FEDORA-2020-41fe1680f6",
              "refsource": "FEDORA",
              "tags": [
                "Third Party Advisory"
              ],
              "url": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/545SPOI3ZPPNPX4TFRIVE4JVRTJRKULL/"
            },
            {
              "name": "USN-4274-1",
              "refsource": "UBUNTU",
              "tags": [
                "Third Party Advisory"
              ],
              "url": "https://usn.ubuntu.com/4274-1/"
            },
            {
              "name": "FEDORA-2020-0c71c00af4",
              "refsource": "FEDORA",
              "tags": [
                "Third Party Advisory"
              ],
              "url": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/5R55ZR52RMBX24TQTWHCIWKJVRV6YAWI/"
            },
            {
              "name": "FEDORA-2020-7694e8be73",
              "refsource": "FEDORA",
              "tags": [
                "Third Party Advisory"
              ],
              "url": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/JDPF3AAVKUAKDYFMFKSIQSVVS3EEFPQH/"
            },
            {
              "name": "openSUSE-SU-2020:0681",
              "refsource": "SUSE",
              "tags": [
                "Broken Link"
              ],
              "url": "http://lists.opensuse.org/opensuse-security-announce/2020-05/msg00047.html"
            },
            {
              "name": "https://security.netapp.com/advisory/ntap-20200702-0005/",
              "refsource": "CONFIRM",
              "tags": [
                "Third Party Advisory"
              ],
              "url": "https://security.netapp.com/advisory/ntap-20200702-0005/"
            },
            {
              "name": "https://www.oracle.com/security-alerts/cpujul2020.html",
              "refsource": "MISC",
              "tags": [
                "Third Party Advisory"
              ],
              "url": "https://www.oracle.com/security-alerts/cpujul2020.html"
            },
            {
              "name": "[debian-lts-announce] 20200909 [SECURITY] [DLA 2369-1] libxml2 security update",
              "refsource": "MLIST",
              "tags": [
                "Mailing List",
                "Third Party Advisory"
              ],
              "url": "https://lists.debian.org/debian-lts-announce/2020/09/msg00009.html"
            },
            {
              "name": "GLSA-202010-04",
              "refsource": "GENTOO",
              "tags": [
                "Third Party Advisory"
              ],
              "url": "https://security.gentoo.org/glsa/202010-04"
            },
            {
              "name": "https://cert-portal.siemens.com/productcert/pdf/ssa-292794.pdf",
              "refsource": "CONFIRM",
              "tags": [
                "Third Party Advisory"
              ],
              "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-292794.pdf"
            },
            {
              "name": "https://us-cert.cisa.gov/ics/advisories/icsa-21-103-08",
              "refsource": "CONFIRM",
              "tags": [
                "Third Party Advisory",
                "US Government Resource"
              ],
              "url": "https://us-cert.cisa.gov/ics/advisories/icsa-21-103-08"
            },
            {
              "name": "https://www.oracle.com/security-alerts/cpuoct2021.html",
              "refsource": "MISC",
              "tags": [
                "Patch",
                "Third Party Advisory"
              ],
              "url": "https://www.oracle.com/security-alerts/cpuoct2021.html"
            },
            {
              "name": "https://www.oracle.com/security-alerts/cpuapr2022.html",
              "refsource": "MISC",
              "tags": [
                "Patch",
                "Third Party Advisory"
              ],
              "url": "https://www.oracle.com/security-alerts/cpuapr2022.html"
            },
            {
              "name": "N/A",
              "refsource": "N/A",
              "tags": [],
              "url": "https://www.oracle.com/security-alerts/cpujul2022.html"
            }
          ]
        }
      },
      "impact": {
        "baseMetricV2": {
          "acInsufInfo": false,
          "cvssV2": {
            "accessComplexity": "LOW",
            "accessVector": "NETWORK",
            "authentication": "NONE",
            "availabilityImpact": "PARTIAL",
            "baseScore": 5.0,
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "vectorString": "AV:N/AC:L/Au:N/C:N/I:N/A:P",
            "version": "2.0"
          },
          "exploitabilityScore": 10.0,
          "impactScore": 2.9,
          "obtainAllPrivilege": false,
          "obtainOtherPrivilege": false,
          "obtainUserPrivilege": false,
          "severity": "MEDIUM",
          "userInteractionRequired": false
        },
        "baseMetricV3": {
          "cvssV3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "exploitabilityScore": 3.9,
          "impactScore": 3.6
        }
      },
      "lastModifiedDate": "2022-07-25T18:15Z",
      "publishedDate": "2020-01-21T23:15Z"
    }
  }
}