ICSA-19-351-02
Vulnerability from csaf_cisa
Published
2019-12-17 00:00
Modified
2020-03-10 00:00
Summary
Siemens SPPA-T3000 (Update A)
Notes
CISA Disclaimer
This CSAF advisory was extracted from unstructured data and may contain inaccuracies. If you notice any errors, please reach out to the designated contact at CISA CSAF: central@cisa.dhs.gov
Legal Notice
All information products included in https://us-cert.cisa.gov/ics are provided "as is" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.
Risk evaluation
Successful exploitation of these vulnerabilities could allow an attacker to execute arbitrary code on the server, cause a denial-of-service condition, view and modify passwords, gain root privileges, access sensitive information, and read and write arbitrary files on the local system.
Critical infrastructure sectors
Energy
Countries/areas deployed
Worldwide
Company headquarters location
Germany
Recommended Practices
CISA recommends users take defensive measures to minimize the risk of exploitation of this vulnerability. Specifically, users should:
Recommended Practices
CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
CISA also provides a section for control systems security recommended practices on the ICS webpage onus-cert.gov. Several recommended practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
Recommended Practices
Additional mitigation guidance and recommended practices are publicly available on the ICS webpage on us-cert.gov in the Technical Information Paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
Organizations observing any suspected malicious activity should follow their established internal procedures and report their findings to CISA for tracking and correlation against other incidents.
Additional Resources
For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories
Exploitability
No known public exploits specifically target these vulnerabilities.
{
"document": {
"acknowledgments": [
{
"names": [
"Gleb Gritsai",
"Eugenie Potseluevskaya",
"Sergey Andreev",
"Radu Motspan"
],
"organization": "Kaspersky Lab",
"summary": "reporting these vulnerabilities to Siemens"
},
{
"names": [
"Vyacheslav Moskvin",
"Ivan B"
],
"organization": "Positive Technologies",
"summary": "reporting these vulnerabilities to Siemens"
},
{
"names": [
"Can Demirel"
],
"organization": "Biznet Bilisim Sistemleri ve Dan\u0131\u015fmanl\u0131k",
"summary": "reporting these vulnerabilities to Siemens"
}
],
"category": "csaf_security_advisory",
"csaf_version": "2.0",
"distribution": {
"text": "Disclosure is not limited",
"tlp": {
"label": "WHITE",
"url": "https://us-cert.cisa.gov/tlp/"
}
},
"lang": "en-US",
"notes": [
{
"category": "general",
"text": "This CSAF advisory was extracted from unstructured data and may contain inaccuracies. If you notice any errors, please reach out to the designated contact at CISA CSAF: central@cisa.dhs.gov",
"title": "CISA Disclaimer"
},
{
"category": "legal_disclaimer",
"text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
"title": "Legal Notice"
},
{
"category": "summary",
"text": "Successful exploitation of these vulnerabilities could allow an attacker to execute arbitrary code on the server, cause a denial-of-service condition, view and modify passwords, gain root privileges, access sensitive information, and read and write arbitrary files on the local system.",
"title": "Risk evaluation"
},
{
"category": "other",
"text": "Energy",
"title": "Critical infrastructure sectors"
},
{
"category": "other",
"text": "Worldwide",
"title": "Countries/areas deployed"
},
{
"category": "other",
"text": "Germany",
"title": "Company headquarters location"
},
{
"category": "general",
"text": "CISA recommends users take defensive measures to minimize the risk of exploitation of this vulnerability. Specifically, users should:",
"title": "Recommended Practices"
},
{
"category": "general",
"text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.\nCISA also provides a section for control systems security recommended practices on the ICS webpage onus-cert.gov. Several recommended practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
"title": "Recommended Practices"
},
{
"category": "general",
"text": "Additional mitigation guidance and recommended practices are publicly available on the ICS webpage on us-cert.gov in the Technical Information Paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.\nOrganizations observing any suspected malicious activity should follow their established internal procedures and report their findings to CISA for tracking and correlation against other incidents.",
"title": "Recommended Practices"
},
{
"category": "general",
"text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
"title": "Additional Resources"
},
{
"category": "other",
"text": "No known public exploits specifically target these vulnerabilities.",
"title": "Exploitability"
}
],
"publisher": {
"category": "coordinator",
"contact_details": "Email: CISAservicedesk@cisa.dhs.gov;\n Toll Free: 1-888-282-0870",
"name": "CISA",
"namespace": "https://www.cisa.gov/"
},
"references": [
{
"category": "external",
"summary": "SSA-451445: Multiple Vulnerabilities in SPPA-T3000 - CSAF Version",
"url": "https://cert-portal.siemens.com/productcert/csaf/ssa-451445.json"
},
{
"category": "self",
"summary": "ICS Advisory ICSA-19-351-02 JSON",
"url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2019/icsa-19-351-02.json"
},
{
"category": "self",
"summary": "ICS Advisory ICSA-19-351-02 Web Version",
"url": "https://www.cisa.gov/news-events/ics-advisories/icsa-19-351-02"
},
{
"category": "external",
"summary": "Recommended Practices",
"url": "https://www.us-cert.gov/ics/alerts/ICS-ALERT-10-301-01"
},
{
"category": "external",
"summary": "Recommended Practices",
"url": "https://www.us-cert.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
},
{
"category": "external",
"summary": "Recommended Practices",
"url": "https://www.us-cert.gov/ics/tips/ICS-TIP-12-146-01B"
},
{
"category": "external",
"summary": "SSA-451445: Multiple Vulnerabilities in SPPA-T3000 - PDF Version",
"url": "https://cert-portal.siemens.com/productcert/pdf/ssa-451445.pdf"
},
{
"category": "external",
"summary": "SSA-451445: Multiple Vulnerabilities in SPPA-T3000 - TXT Version",
"url": "https://cert-portal.siemens.com/productcert/txt/ssa-451445.txt"
}
],
"title": "Siemens SPPA-T3000 (Update A)",
"tracking": {
"current_release_date": "2020-03-10T00:00:00.000000Z",
"generator": {
"engine": {
"name": "CISA CSAF Generator",
"version": "1.0.0"
}
},
"id": "ICSA-19-351-02",
"initial_release_date": "2019-12-17T00:00:00.000000Z",
"revision_history": [
{
"date": "2019-12-17T00:00:00.000000Z",
"legacy_version": "Initial",
"number": "1",
"summary": "ICSA-19-351-02 Siemens SPPA-T3000"
},
{
"date": "2020-03-10T00:00:00.000000Z",
"legacy_version": "A",
"number": "2",
"summary": "ICSA-19-351-02 Siemens SPPA-T3000 (Update A)"
}
],
"status": "final",
"version": "2"
}
},
"product_tree": {
"branches": [
{
"branches": [
{
"branches": [
{
"category": "product_version_range",
"name": "\u003c Service Pack R8.2 SP2",
"product": {
"name": "SPPA-T3000 Application Server",
"product_id": "CSAFPID-0001"
}
}
],
"category": "product_name",
"name": "SPPA-T3000 Application Server"
},
{
"branches": [
{
"category": "product_version_range",
"name": "vers:all/*",
"product": {
"name": "SPPA-T3000 MS3000 Migration Server",
"product_id": "CSAFPID-0002"
}
}
],
"category": "product_name",
"name": "SPPA-T3000 MS3000 Migration Server"
}
],
"category": "vendor",
"name": "Siemens"
}
]
},
"vulnerabilities": [
{
"cve": "CVE-2018-4832",
"cwe": {
"id": "CWE-20",
"name": "Improper Input Validation"
},
"notes": [
{
"category": "summary",
"text": "Specially crafted messages sent to the RPC service of the affected products could cause a Denial-of-Service condition on the remote and local communication functionality of the affected products. A reboot of the system is required to recover the remote and local communication functionality.\n\nPlease note that an attacker needs to have network access to the Application Server in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0001"
]
},
"references": [
{
"summary": "CVE-2018-4832 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2018-4832.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2018-4832"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Please contact your Siemens Energy service management organization to obtain the update to Service Pack R8.2 SP2.",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0001"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 7.5,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0001"
]
}
],
"title": "CVE-2018-4832"
},
{
"cve": "CVE-2019-18283",
"cwe": {
"id": "CWE-502",
"name": "Deserialization of Untrusted Data"
},
"notes": [
{
"category": "summary",
"text": "The AdminService is available without authentication on the Application Server. An attacker can gain remote code execution by sending specifically crafted objects to one of its functions.\n\nPlease note that an attacker needs to have access to the Application Highway in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0001"
]
},
"references": [
{
"summary": "CVE-2019-18283 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18283.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18283"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Please contact your Siemens Energy service management organization to obtain the update to Service Pack R8.2 SP2.",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0001"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0001"
]
}
],
"title": "CVE-2019-18283"
},
{
"cve": "CVE-2019-18284",
"cwe": {
"id": "CWE-287",
"name": "Improper Authentication"
},
"notes": [
{
"category": "summary",
"text": "The AdminService is available without authentication on the Application Server. An attacker can use methods exposed via this interface to receive password hashes of other users and to change user passwords.\n\nPlease note that an attacker needs to have access to the Application Highway in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0001"
]
},
"references": [
{
"summary": "CVE-2019-18284 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18284.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18284"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Please contact your Siemens Energy service management organization to obtain the update to Service Pack R8.2 SP2.",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0001"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0001"
]
}
],
"title": "CVE-2019-18284"
},
{
"cve": "CVE-2019-18285",
"cwe": {
"id": "CWE-319",
"name": "Cleartext Transmission of Sensitive Information"
},
"notes": [
{
"category": "summary",
"text": "The RMI communication between the client and the Application Server is unencrypted. An attacker with access to the communication channel can read credentials of a valid user.\n\nPlease note that an attacker needs to have access to the Application Highway in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0001"
]
},
"references": [
{
"summary": "CVE-2019-18285 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18285.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18285"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:N/A:N"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Please contact your Siemens Energy service management organization to obtain the update to Service Pack R8.2 SP2.",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0001"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 5.3,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:N/A:N/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0001"
]
}
],
"title": "CVE-2019-18285"
},
{
"cve": "CVE-2019-18286",
"cwe": {
"id": "CWE-287",
"name": "Improper Authentication"
},
"notes": [
{
"category": "summary",
"text": "The Application Server exposes directory listings and files containing sensitive information.\n\nThis vulnerability is independent from CVE-2019-18287.\n\nPlease note that an attacker needs to have access to the Application Highway in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0001"
]
},
"references": [
{
"summary": "CVE-2019-18286 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18286.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18286"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Please contact your Siemens Energy service management organization to obtain the update to Service Pack R8.2 SP2.",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0001"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 5.3,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0001"
]
}
],
"title": "CVE-2019-18286"
},
{
"cve": "CVE-2019-18287",
"cwe": {
"id": "CWE-287",
"name": "Improper Authentication"
},
"notes": [
{
"category": "summary",
"text": "The Application Server exposes directory listings and files containing sensitive information.\n\nThis vulnerability is independent from CVE-2019-18286.\n\nPlease note that an attacker needs to have access to the Application Highway in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0001"
]
},
"references": [
{
"summary": "CVE-2019-18287 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18287.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18287"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Please contact your Siemens Energy service management organization to obtain the update to Service Pack R8.2 SP2.",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0001"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 5.3,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0001"
]
}
],
"title": "CVE-2019-18287"
},
{
"cve": "CVE-2019-18288",
"cwe": {
"id": "CWE-434",
"name": "Unrestricted Upload of File with Dangerous Type"
},
"notes": [
{
"category": "summary",
"text": "An attacker with valid authentication at the RMI interface could be able to gain remote code execution through an unsecured file upload.\n\nPlease note that an attacker needs to have access to the Application Highway in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0001"
]
},
"references": [
{
"summary": "CVE-2019-18288 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18288.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18288"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Please contact your Siemens Energy service management organization to obtain the update to Service Pack R8.2 SP2.",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0001"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 8.8,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0001"
]
}
],
"title": "CVE-2019-18288"
},
{
"cve": "CVE-2019-18289",
"cwe": {
"id": "CWE-122",
"name": "Heap-based Buffer Overflow"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the MS3000 Server could trigger a Denial-of-Service condition and potentially gain remote code execution by sending specifically crafted packets to port 5010/tcp.\n\nThis vulnerability is independent from CVE-2019-18293, CVE-2019-18295, and CVE-2019-18296.\n\nPlease note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18289 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18289.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18289"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18289"
},
{
"cve": "CVE-2019-18290",
"cwe": {
"id": "CWE-122",
"name": "Heap-based Buffer Overflow"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the MS3000 Server could trigger a Denial-of-Service condition by sending specifically crafted packets to port 5010/tcp.\n\nThis vulnerability is independent from CVE-2019-18291, CVE-2019-18292, CVE-2019-18294, CVE-2019-18298, CVE-2019-18299, CVE-2019-18300, CVE-2019-18301, CVE-2019-18302, CVE-2019-18303, CVE-2019-18304, CVE-2019-18305, CVE-2019-18306, and CVE-2019-18307.\n\nPlease note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18290 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18290.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18290"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 7.5,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18290"
},
{
"cve": "CVE-2019-18291",
"cwe": {
"id": "CWE-122",
"name": "Heap-based Buffer Overflow"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the MS3000 Server could trigger a Denial-of-Service condition by sending specifically crafted packets to port 5010/tcp.\n\nThis vulnerability is independent from CVE-2019-18290, CVE-2019-18292, CVE-2019-18294, CVE-2019-18298, CVE-2019-18299, CVE-2019-18300, CVE-2019-18301, CVE-2019-18302, CVE-2019-18303, CVE-2019-18304, CVE-2019-18305, CVE-2019-18306, and CVE-2019-18307.\n\nPlease note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18291 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18291.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18291"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 7.5,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18291"
},
{
"cve": "CVE-2019-18292",
"cwe": {
"id": "CWE-122",
"name": "Heap-based Buffer Overflow"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the MS3000 Server could trigger a Denial-of-Service condition by sending specifically crafted packets to port 5010/tcp.\n\nThis vulnerability is independent from CVE-2019-18290, CVE-2019-18291, CVE-2019-18294, CVE-2019-18298, CVE-2019-18299, CVE-2019-18300, CVE-2019-18301, CVE-2019-18302, CVE-2019-18303, CVE-2019-18304, CVE-2019-18305, CVE-2019-18306, and CVE-2019-18307.\n\nPlease note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18292 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18292.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18292"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 5.3,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18292"
},
{
"cve": "CVE-2019-18293",
"cwe": {
"id": "CWE-122",
"name": "Heap-based Buffer Overflow"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the MS3000 Server could trigger a Denial-of-Service condition and potentially gain remote code execution by sending specifically crafted packets to port 5010/tcp.\n\nThis vulnerability is independent from CVE-2019-18289, CVE-2019-18295, and CVE-2019-18296.\n\nPlease note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18293 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18293.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18293"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18293"
},
{
"cve": "CVE-2019-18294",
"cwe": {
"id": "CWE-122",
"name": "Heap-based Buffer Overflow"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the MS3000 Server could trigger a Denial-of-Service condition by sending specifically crafted packets to port 5010/tcp.\n\nThis vulnerability is independent from CVE-2019-18290, CVE-2019-18291, CVE-2019-18292, CVE-2019-18298, CVE-2019-18299, CVE-2019-18300, CVE-2019-18301, CVE-2019-18302, CVE-2019-18303, CVE-2019-18304, CVE-2019-18305, CVE-2019-18306, and CVE-2019-18307.\n\nPlease note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18294 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18294.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18294"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 5.3,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18294"
},
{
"cve": "CVE-2019-18295",
"cwe": {
"id": "CWE-122",
"name": "Heap-based Buffer Overflow"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the MS3000 Server could trigger a Denial-of-Service condition and potentially gain remote code execution by sending specifically crafted packets to port 5010/tcp.\n\nThis vulnerability is independent from CVE-2019-18289, CVE-2019-18293, and CVE-2019-18296.\n\nPlease note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18295 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18295.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18295"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 8.1,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18295"
},
{
"cve": "CVE-2019-18296",
"cwe": {
"id": "CWE-122",
"name": "Heap-based Buffer Overflow"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the MS3000 Server could trigger a Denial-of-Service condition and potentially gain remote code execution by sending specifically crafted packets to port 5010/tcp.\n\nThis vulnerability is independent from CVE-2019-18289, CVE-2019-18293, and CVE-2019-18295.\n\nPlease note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18296 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18296.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18296"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 8.1,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18296"
},
{
"cve": "CVE-2019-18297",
"cwe": {
"id": "CWE-122",
"name": "Heap-based Buffer Overflow"
},
"notes": [
{
"category": "summary",
"text": "An attacker with local access to the MS3000 Server and low privileges could gain root privileges by sending specifically crafted packets to a named pipe.\n\nPlease note that an attacker needs to have local access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18297 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18297.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18297"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 7.8,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18297"
},
{
"cve": "CVE-2019-18298",
"cwe": {
"id": "CWE-190",
"name": "Integer Overflow or Wraparound"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the MS3000 Server could trigger a Denial-of-Service condition by sending specifically crafted packets to port 5010/tcp.\n\nThis vulnerability is independent from CVE-2019-18290, CVE-2019-18291, CVE-2019-18292, CVE-2019-18294, CVE-2019-18299, CVE-2019-18300, CVE-2019-18301, CVE-2019-18302, CVE-2019-18303, CVE-2019-18304, CVE-2019-18305, CVE-2019-18306, and CVE-2019-18307.\n\nPlease note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18298 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18298.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18298"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 5.3,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18298"
},
{
"cve": "CVE-2019-18299",
"cwe": {
"id": "CWE-190",
"name": "Integer Overflow or Wraparound"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the MS3000 Server can trigger a Denial-of-Service condition by sending specifically crafted packets to port 5010/tcp.\n\nThis vulnerability is independent from CVE-2019-18290, CVE-2019-18291, CVE-2019-18292, CVE-2019-18294, CVE-2019-18298, CVE-2019-18300, CVE-2019-18301, CVE-2019-18302, CVE-2019-18303, CVE-2019-18304, CVE-2019-18305, CVE-2019-18306, and CVE-2019-18307.\n\nPlease note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18299 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18299.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18299"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 5.3,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18299"
},
{
"cve": "CVE-2019-18300",
"cwe": {
"id": "CWE-190",
"name": "Integer Overflow or Wraparound"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the MS3000 Server can trigger a Denial-of-Service condition by sending specifically crafted packets to port 5010/tcp.\n\nThis vulnerability is independent from CVE-2019-18290, CVE-2019-18291, CVE-2019-18292, CVE-2019-18294, CVE-2019-18298, CVE-2019-18299, CVE-2019-18301, CVE-2019-18302, CVE-2019-18303, CVE-2019-18304, CVE-2019-18305, CVE-2019-18306, and CVE-2019-18307.\n\nPlease note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18300 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18300.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18300"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 5.3,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18300"
},
{
"cve": "CVE-2019-18301",
"cwe": {
"id": "CWE-190",
"name": "Integer Overflow or Wraparound"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the MS3000 Server can trigger a Denial-of-Service condition by sending specifically crafted packets to port 5010/tcp.\n\nThis vulnerability is independent from CVE-2019-18290, CVE-2019-18291, CVE-2019-18292, CVE-2019-18294, CVE-2019-18298, CVE-2019-18299, CVE-2019-18300, CVE-2019-18302, CVE-2019-18303, CVE-2019-18304, CVE-2019-18305, CVE-2019-18306, and CVE-2019-18307.\n\nPlease note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18301 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18301.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18301"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 5.3,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18301"
},
{
"cve": "CVE-2019-18302",
"cwe": {
"id": "CWE-190",
"name": "Integer Overflow or Wraparound"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the MS3000 Server can trigger a Denial-of-Service condition by sending specifically crafted packets to port 5010/tcp.\n\nThis vulnerability is independent from CVE-2019-18290, CVE-2019-18291, CVE-2019-18292, CVE-2019-18294, CVE-2019-18298, CVE-2019-18299, CVE-2019-18300, CVE-2019-18301, CVE-2019-18303, CVE-2019-18304, CVE-2019-18305, CVE-2019-18306, and CVE-2019-18307.\n\nPlease note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18302 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18302.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18302"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 5.3,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18302"
},
{
"cve": "CVE-2019-18303",
"cwe": {
"id": "CWE-190",
"name": "Integer Overflow or Wraparound"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the MS3000 Server can trigger a Denial-of-Service condition by sending specifically crafted packets to port 5010/tcp.\n\nThis vulnerability is independent from CVE-2019-18290, CVE-2019-18291, CVE-2019-18292, CVE-2019-18294, CVE-2019-18298, CVE-2019-18299, CVE-2019-18300, CVE-2019-18301, CVE-2019-18302, CVE-2019-18304, CVE-2019-18305, CVE-2019-18306, and CVE-2019-18307.\n\nPlease note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18303 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18303.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18303"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 5.3,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18303"
},
{
"cve": "CVE-2019-18304",
"cwe": {
"id": "CWE-190",
"name": "Integer Overflow or Wraparound"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the MS3000 Server can trigger a Denial-of-Service condition by sending specifically crafted packets to port 5010/tcp.\n\nThis vulnerability is independent from CVE-2019-18290, CVE-2019-18291, CVE-2019-18292, CVE-2019-18294, CVE-2019-18298, CVE-2019-18299, CVE-2019-18300, CVE-2019-18301, CVE-2019-18302, CVE-2019-18303, CVE-2019-18305, CVE-2019-18306, and CVE-2019-18307.\n\nPlease note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18304 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18304.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18304"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 5.3,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18304"
},
{
"cve": "CVE-2019-18305",
"cwe": {
"id": "CWE-190",
"name": "Integer Overflow or Wraparound"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the MS3000 Server could trigger a Denial-of-Service condition by sending specifically crafted packets to port 5010/tcp.\n\nThis vulnerability is independent from CVE-2019-18290, CVE-2019-18291, CVE-2019-18292, CVE-2019-18294, CVE-2019-18298, CVE-2019-18299, CVE-2019-18300, CVE-2019-18301, CVE-2019-18302, CVE-2019-18303, CVE-2019-18304, CVE-2019-18306, and CVE-2019-18307.\n\nPlease note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18305 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18305.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18305"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 5.3,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18305"
},
{
"cve": "CVE-2019-18306",
"cwe": {
"id": "CWE-125",
"name": "Out-of-bounds Read"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the MS3000 Server could trigger a Denial-of-Service condition by sending specifically crafted packets to port 5010/tcp.\n\nThis vulnerability is independent from CVE-2019-18290, CVE-2019-18291, CVE-2019-18292, CVE-2019-18294, CVE-2019-18298, CVE-2019-18299, CVE-2019-18300, CVE-2019-18301, CVE-2019-18302, CVE-2019-18303, CVE-2019-18304, CVE-2019-18305, and CVE-2019-18307.\n\nPlease note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18306 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18306.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18306"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 5.3,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18306"
},
{
"cve": "CVE-2019-18307",
"cwe": {
"id": "CWE-125",
"name": "Out-of-bounds Read"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the MS3000 Server could trigger a Denial-of-Service condition by sending specifically crafted packets to port 5010/tcp.\n\nThis vulnerability is independent from CVE-2019-18290, CVE-2019-18291, CVE-2019-18292, CVE-2019-18294, CVE-2019-18298, CVE-2019-18299, CVE-2019-18300, CVE-2019-18301, CVE-2019-18302, CVE-2019-18303, CVE-2019-18304, CVE-2019-18305, and CVE-2019-18306.\n\nPlease note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18307 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18307.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18307"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 5.3,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18307"
},
{
"cve": "CVE-2019-18308",
"cwe": {
"id": "CWE-284",
"name": "Improper Access Control"
},
"notes": [
{
"category": "summary",
"text": "An attacker with local access to the MS3000 Server and a low privileged user account could gain root privileges by manipulating specific files in the local file system.\n\nThis vulnerability is independent from CVE-2019-18309.\n\nPlease note that an attacker needs to have local access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18308 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18308.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18308"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 7.8,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18308"
},
{
"cve": "CVE-2019-18309",
"cwe": {
"id": "CWE-284",
"name": "Improper Access Control"
},
"notes": [
{
"category": "summary",
"text": "An attacker with local access to the MS3000 Server and a low privileged user account could gain root privileges by manipulating specific files in the local file system.\n\nThis vulnerability is independent from CVE-2019-18308.\n\nPlease note that an attacker needs to have local access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18309 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18309.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18309"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 7.8,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18309"
},
{
"cve": "CVE-2019-18310",
"cwe": {
"id": "CWE-121",
"name": "Stack-based Buffer Overflow"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the MS3000 Server could trigger a Denial-of-Service condition by sending specifically crafted packets to port 7061/tcp.\n\nThis vulnerability is independent from CVE-2019-18311.\n\nPlease note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18310 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18310.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18310"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 7.5,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18310"
},
{
"cve": "CVE-2019-18311",
"cwe": {
"id": "CWE-285",
"name": "Improper Authorization"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the MS3000 Server could trigger a Denial-of-Service condition by sending specifically crafted packets to port 7061/tcp.\n\nThis vulnerability is independent from CVE-2019-18310.\n\nPlease note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18311 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18311.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18311"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 7.5,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18311"
},
{
"cve": "CVE-2019-18312",
"cwe": {
"id": "CWE-287",
"name": "Improper Authentication"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the MS3000 Server could be able to enumerate running RPC services.\n\nPlease note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18312 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18312.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18312"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 5.3,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18312"
},
{
"cve": "CVE-2019-18313",
"cwe": {
"id": "CWE-434",
"name": "Unrestricted Upload of File with Dangerous Type"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the MS3000 Server could gain remote code execution by sending specifically crafted objects to one of the RPC services.\n\nPlease note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18313 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18313.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18313"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18313"
},
{
"cve": "CVE-2019-18314",
"cwe": {
"id": "CWE-287",
"name": "Improper Authentication"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the Application Server could gain remote code execution by sending specifically crafted objects via RMI.\n\nPlease note that an attacker needs to have network access to the Application Server in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0001"
]
},
"references": [
{
"summary": "CVE-2019-18314 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18314.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18314"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Please contact your Siemens Energy service management organization to obtain the update to Service Pack R8.2 SP2.",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0001"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0001"
]
}
],
"title": "CVE-2019-18314"
},
{
"cve": "CVE-2019-18315",
"cwe": {
"id": "CWE-287",
"name": "Improper Authentication"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the Application Server could gain remote code execution by sending specifically crafted packets to 8888/tcp.\n\nPlease note that an attacker needs to have network access to the Application Server in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0001"
]
},
"references": [
{
"summary": "CVE-2019-18315 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18315.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18315"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Please contact your Siemens Energy service management organization to obtain the update to Service Pack R8.2 SP2.",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0001"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0001"
]
}
],
"title": "CVE-2019-18315"
},
{
"cve": "CVE-2019-18316",
"cwe": {
"id": "CWE-502",
"name": "Deserialization of Untrusted Data"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the Application Server could gain remote code execution by sending specifically crafted packets to 1099/tcp.\n\nPlease note that an attacker needs to have network access to the Application Server in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0001"
]
},
"references": [
{
"summary": "CVE-2019-18316 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18316.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18316"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Please contact your Siemens Energy service management organization to obtain the update to Service Pack R8.2 SP2.",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0001"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0001"
]
}
],
"title": "CVE-2019-18316"
},
{
"cve": "CVE-2019-18317",
"cwe": {
"id": "CWE-287",
"name": "Improper Authentication"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the Application Server could cause a Denial-of-Service condition by sending specifically crafted objects via RMI.\n\nThis vulnerability is independent from CVE-2019-18318 and CVE-2019-18319.\n\nPlease note that an attacker needs to have network access to the Application Server in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0001"
]
},
"references": [
{
"summary": "CVE-2019-18317 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18317.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18317"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Please contact your Siemens Energy service management organization to obtain the update to Service Pack R8.2 SP2.",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0001"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 7.5,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0001"
]
}
],
"title": "CVE-2019-18317"
},
{
"cve": "CVE-2019-18318",
"cwe": {
"id": "CWE-287",
"name": "Improper Authentication"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the Application Server can cause a Denial-of-Service condition by sending specifically crafted objects via RMI.\n\nThis vulnerability is independent from CVE-2019-18317 and CVE-2019-18319.\n\nPlease note that an attacker needs to have network access to the Application Server in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0001"
]
},
"references": [
{
"summary": "CVE-2019-18318 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18318.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18318"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Please contact your Siemens Energy service management organization to obtain the update to Service Pack R8.2 SP2.",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0001"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 7.5,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0001"
]
}
],
"title": "CVE-2019-18318"
},
{
"cve": "CVE-2019-18319",
"cwe": {
"id": "CWE-287",
"name": "Improper Authentication"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the Application Server could cause a Denial-of-Service condition by sending specifically crafted objects via RMI.\n\nThis vulnerability is independent from CVE-2019-18317 and CVE-2019-18318.\n\nPlease note that an attacker needs to have network access to the Application Server in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0001"
]
},
"references": [
{
"summary": "CVE-2019-18319 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18319.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18319"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Please contact your Siemens Energy service management organization to obtain the update to Service Pack R8.2 SP2.",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0001"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 7.5,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0001"
]
}
],
"title": "CVE-2019-18319"
},
{
"cve": "CVE-2019-18320",
"cwe": {
"id": "CWE-287",
"name": "Improper Authentication"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the Application Server could be able to upload arbitrary files without authentication.\n\nPlease note that an attacker needs to have network access to the Application Server in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0001"
]
},
"references": [
{
"summary": "CVE-2019-18320 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18320.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18320"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Please contact your Siemens Energy service management organization to obtain the update to Service Pack R8.2 SP2.",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0001"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 7.5,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0001"
]
}
],
"title": "CVE-2019-18320"
},
{
"cve": "CVE-2019-18321",
"cwe": {
"id": "CWE-287",
"name": "Improper Authentication"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the MS3000 Server could be able to read and write arbitrary files on the local file system by sending specifically crafted packets to port 5010/tcp.\n\nThis vulnerability is independent from CVE-2019-18322.\n\nPlease note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18321 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18321.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18321"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 9.1,
"baseSeverity": "CRITICAL",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18321"
},
{
"cve": "CVE-2019-18322",
"cwe": {
"id": "CWE-287",
"name": "Improper Authentication"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the MS3000 Server could be able to read and write arbitrary files on the local file system by sending specifically crafted packets to port 5010/tcp.\n\nThis vulnerability is independent from CVE-2019-18321.\n\nPlease note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18322 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18322.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18322"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 9.1,
"baseSeverity": "CRITICAL",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18322"
},
{
"cve": "CVE-2019-18323",
"cwe": {
"id": "CWE-122",
"name": "Heap-based Buffer Overflow"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the MS3000 Server could cause a Denial-of-Service condition and potentially gain remote code execution by sending specifically crafted packets to 5010/tcp.\n\nThis vulnerability is independent from CVE-2019-18324, CVE-2019-18325, CVE-2019-18326, CVE-2019-18327, CVE-2019-18328, CVE-2019-18329, and CVE-2019-18330.\n\nPlease note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18323 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18323.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18323"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18323"
},
{
"cve": "CVE-2019-18324",
"cwe": {
"id": "CWE-122",
"name": "Heap-based Buffer Overflow"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the MS3000 Server can cause a Denial-of-Service condition and potentially gain remote code execution by sending specifically crafted packets to 5010/tcp.\n\nThis vulnerability is independent from CVE-2019-18323, CVE-2019-18325, CVE-2019-18326, CVE-2019-18327, CVE-2019-18328, CVE-2019-18329, and CVE-2019-18330.\n\nPlease note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18324 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18324.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18324"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18324"
},
{
"cve": "CVE-2019-18325",
"cwe": {
"id": "CWE-122",
"name": "Heap-based Buffer Overflow"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the MS3000 Server can cause a Denial-of-Service condition and potentially gain remote code execution by sending specifically crafted packets to 5010/tcp.\n\nThis vulnerability is independent from CVE-2019-18323, CVE-2019-18324, CVE-2019-18326, CVE-2019-18327, CVE-2019-18328, CVE-2019-18329, and CVE-2019-18330.\n\nPlease note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18325 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18325.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18325"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18325"
},
{
"cve": "CVE-2019-18326",
"cwe": {
"id": "CWE-122",
"name": "Heap-based Buffer Overflow"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the MS3000 Server can cause a Denial-of-Service condition and potentially gain remote code execution by sending specifically crafted packets to 5010/tcp.\n\nThis vulnerability is independent from CVE-2019-18323, CVE-2019-18324, CVE-2019-18325, CVE-2019-18327, CVE-2019-18328, CVE-2019-18329, and CVE-2019-18330.\n\nPlease note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18326 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18326.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18326"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18326"
},
{
"cve": "CVE-2019-18327",
"cwe": {
"id": "CWE-122",
"name": "Heap-based Buffer Overflow"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the MS3000 Server can cause a Denial-of-Service condition and potentially gain remote code execution by sending specifically crafted packets to 5010/tcp.\n\nThis vulnerability is independent from CVE-2019-18323, CVE-2019-18324, CVE-2019-18325, CVE-2019-18326, CVE-2019-18328, CVE-2019-18329, and CVE-2019-18330.\n\nPlease note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18327 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18327.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18327"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18327"
},
{
"cve": "CVE-2019-18328",
"cwe": {
"id": "CWE-122",
"name": "Heap-based Buffer Overflow"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the MS3000 Server can cause a Denial-of-Service condition and potentially gain remote code execution by sending specifically crafted packets to 5010/tcp.\n\nThis vulnerability is independent from CVE-2019-18323, CVE-2019-18324, CVE-2019-18325, CVE-2019-18326, CVE-2019-18327, CVE-2019-18329, and CVE-2019-18330.\n\nPlease note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18328 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18328.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18328"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18328"
},
{
"cve": "CVE-2019-18329",
"cwe": {
"id": "CWE-122",
"name": "Heap-based Buffer Overflow"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the MS3000 Server can cause a Denial-of-Service condition and potentially gain remote code execution by sending specifically crafted packets to 5010/tcp.\n\nThis vulnerability is independent from CVE-2019-18323, CVE-2019-18324, CVE-2019-18325, CVE-2019-18326, CVE-2019-18327, CVE-2019-18328, and CVE-2019-18330.\n\nPlease note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18329 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18329.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18329"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18329"
},
{
"cve": "CVE-2019-18330",
"cwe": {
"id": "CWE-122",
"name": "Heap-based Buffer Overflow"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the MS3000 Server could cause a Denial-of-Service condition and potentially gain remote code execution by sending specifically crafted packets to 5010/tcp.\n\nThis vulnerability is independent from CVE-2019-18323, CVE-2019-18324, CVE-2019-18325, CVE-2019-18326, CVE-2019-18327, CVE-2019-18328, and CVE-2019-18329.\n\nPlease note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0002"
]
},
"references": [
{
"summary": "CVE-2019-18330 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18330.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18330"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Apply released configuration specifications for SPPA-T3000 MS3000 available with Service Pack R8.2 SP2 to mitigate these vulnerabilities.",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0002"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0002"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0002"
]
}
],
"title": "CVE-2019-18330"
},
{
"cve": "CVE-2019-18331",
"cwe": {
"id": "CWE-200",
"name": "Exposure of Sensitive Information to an Unauthorized Actor"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the Application Server could gain access to path and filenames on the server by sending specifically crafted packets to 1099/tcp.\n\nPlease note that an attacker needs to have network access to the Application Server in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0001"
]
},
"references": [
{
"summary": "CVE-2019-18331 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18331.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18331"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Please contact your Siemens Energy service management organization to obtain the update to Service Pack R8.2 SP2.",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0001"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 5.3,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0001"
]
}
],
"title": "CVE-2019-18331"
},
{
"cve": "CVE-2019-18332",
"cwe": {
"id": "CWE-200",
"name": "Exposure of Sensitive Information to an Unauthorized Actor"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the Application Server could gain access to directory listings of the server by sending specifically crafted packets to 80/tcp, 8095/tcp or 8080/tcp.\n\nPlease note that an attacker needs to have network access to the Application Server in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0001"
]
},
"references": [
{
"summary": "CVE-2019-18332 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18332.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18332"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Please contact your Siemens Energy service management organization to obtain the update to Service Pack R8.2 SP2.",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0001"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 5.3,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0001"
]
}
],
"title": "CVE-2019-18332"
},
{
"cve": "CVE-2019-18333",
"cwe": {
"id": "CWE-200",
"name": "Exposure of Sensitive Information to an Unauthorized Actor"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the Application Server could gain access to filenames on the server by sending specifically crafted packets to 8090/tcp.\n\nPlease note that an attacker needs to have network access to the Application Server in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0001"
]
},
"references": [
{
"summary": "CVE-2019-18333 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18333.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18333"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Please contact your Siemens Energy service management organization to obtain the update to Service Pack R8.2 SP2.",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0001"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 5.3,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0001"
]
}
],
"title": "CVE-2019-18333"
},
{
"cve": "CVE-2019-18334",
"cwe": {
"id": "CWE-200",
"name": "Exposure of Sensitive Information to an Unauthorized Actor"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the Application Server could be able to enumerate valid user names by sending specifically crafted packets to 8090/tcp.\n\nPlease note that an attacker needs to have network access to the Application Server in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0001"
]
},
"references": [
{
"summary": "CVE-2019-18334 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18334.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18334"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Please contact your Siemens Energy service management organization to obtain the update to Service Pack R8.2 SP2.",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0001"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 5.3,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0001"
]
}
],
"title": "CVE-2019-18334"
},
{
"cve": "CVE-2019-18335",
"cwe": {
"id": "CWE-200",
"name": "Exposure of Sensitive Information to an Unauthorized Actor"
},
"notes": [
{
"category": "summary",
"text": "An attacker with network access to the Application Server could be able to gain access to logs and configuration files by sending specifically crafted packets to 80/tcp.\n\nPlease note that an attacker needs to have network access to the Application Server in order to exploit this vulnerability.\n\nAt the time of advisory publication no public exploitation of this security vulnerability was known.",
"title": "Summary"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0001"
]
},
"references": [
{
"summary": "CVE-2019-18335 Mitre 5.0 json",
"url": "https://cert-portal.siemens.com/productcert/mitre/CVE-2019-18335.json"
},
{
"category": "external",
"summary": "web.nvd.nist.gov",
"url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-18335"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Please contact your Siemens Energy service management organization to obtain the update to Service Pack R8.2 SP2.",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations described in the SPPA-T3000 security manual",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Restrict access to the Application Highway using the SPPA-T3000 Firewall",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "External components should be connected only to the SPPA-T3000 DMZ; no bridging of an external network to either the Application- or Automation highways is allowed",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Perform regular updates of the SPPA-T3000 (e.g. by using the Security Server if available)",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Implement mitigations provided in the customer information letter distributed via the customer service portal",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Please contact your local Siemens Energy representative if you need help at securing your SPPA-T3000 installation",
"product_ids": [
"CSAFPID-0001"
]
},
{
"category": "mitigation",
"details": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid\u0027s reliability can thus be minimized by virtue of the grid design.\n\nSiemens Energy strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens Energy strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment.\n\nAs a general security measure Siemens Energy strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.",
"product_ids": [
"CSAFPID-0001"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 5.3,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:U/RC:C",
"version": "3.1"
},
"products": [
"CSAFPID-0001"
]
}
],
"title": "CVE-2019-18335"
}
]
}
Loading…
Loading…
Sightings
| Author | Source | Type | Date |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
- Confirmed: The vulnerability is confirmed from an analyst perspective.
- Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
- Patched: This vulnerability was successfully patched by the user reporting the sighting.
- Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
- Not confirmed: The user expresses doubt about the veracity of the vulnerability.
- Not patched: This vulnerability was not successfully patched by the user reporting the sighting.