ICSA-23-080-07
Vulnerability from csaf_cisa
Published
2023-03-14 00:00
Modified
2023-03-14 00:00
Summary
Siemens SCALANCE Third-Party

Notes

Summary
Multiple vulnerabilities affecting various third-party components of SCALANCE W-700 IEEE 802.11ax devices before V2.0 could allow an attacker to cause a denial of service condition, disclose sensitive data or violate the system integrity. Siemens has released an update for SCALANCE W-700 IEEE 802.11ax and recommends to update to the latest version.
General Recommendations
As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens' operational guidelines for Industrial Security (Download: https://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals. Additional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity
Additional Resources
For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories
Terms of Use
Siemens Security Advisories are subject to the terms and conditions contained in Siemens' underlying license terms or other applicable agreements previously agreed to with Siemens (hereinafter "License Terms"). To the extent applicable to information, software or documentation made available in or through a Siemens Security Advisory, the Terms of Use of Siemens' Global Website (https://www.siemens.com/terms_of_use, hereinafter "Terms of Use"), in particular Sections 8-10 of the Terms of Use, shall apply additionally. In case of conflicts, the License Terms shall prevail over the Terms of Use.
Legal Notice
All information products included in https://us-cert.cisa.gov/ics are provided "as is" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.
Advisory Conversion Disclaimer
This CISA CSAF advisory was converted from Siemens ProductCERT's CSAF advisory.
Critical infrastructure sectors
Multiple
Countries/areas deployed
Worldwide
Company headquarters location
Germany
Recommended Practices
CISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.
Recommended Practices
Minimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.
Recommended Practices
Locate control system networks and remote devices behind firewalls and isolate them from business networks.
Recommended Practices
When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.
Recommended Practices
CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
Recommended Practices
CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
Recommended Practices
CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
Recommended Practices
Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.


To clipboard 

{
   document: {
      acknowledgments: [
         {
            organization: "Siemens ProductCERT",
            summary: "reporting these vulnerabilities to CISA.",
         },
      ],
      category: "csaf_security_advisory",
      csaf_version: "2.0",
      distribution: {
         text: "Disclosure is not limited",
         tlp: {
            label: "WHITE",
            url: "https://us-cert.cisa.gov/tlp/",
         },
      },
      notes: [
         {
            category: "summary",
            text: "Multiple vulnerabilities affecting various third-party components of SCALANCE W-700 IEEE 802.11ax devices before V2.0 could allow an attacker to cause a denial of service condition, disclose sensitive data or violate the system integrity.\n\nSiemens has released an update for SCALANCE W-700 IEEE 802.11ax and recommends to update to the latest version.",
            title: "Summary",
         },
         {
            category: "general",
            text: "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens' operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
            title: "General Recommendations",
         },
         {
            category: "general",
            text: "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
            title: "Additional Resources",
         },
         {
            category: "legal_disclaimer",
            text: "Siemens Security Advisories are subject to the terms and conditions contained in Siemens' underlying license terms or other applicable agreements previously agreed to with Siemens (hereinafter \"License Terms\"). To the extent applicable to information, software or documentation made available in or through a Siemens Security Advisory, the Terms of Use of Siemens' Global Website (https://www.siemens.com/terms_of_use, hereinafter \"Terms of Use\"), in particular Sections 8-10 of the Terms of Use, shall apply additionally. In case of conflicts, the License Terms shall prevail over the Terms of Use.",
            title: "Terms of Use",
         },
         {
            category: "legal_disclaimer",
            text: "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
            title: "Legal Notice",
         },
         {
            category: "other",
            text: "This CISA CSAF advisory was converted from Siemens ProductCERT's CSAF advisory.",
            title: "Advisory Conversion Disclaimer",
         },
         {
            category: "other",
            text: "Multiple",
            title: "Critical infrastructure sectors",
         },
         {
            category: "other",
            text: "Worldwide",
            title: "Countries/areas deployed",
         },
         {
            category: "other",
            text: "Germany",
            title: "Company headquarters location",
         },
         {
            category: "general",
            text: "CISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.",
            title: "Recommended Practices",
         },
         {
            category: "general",
            text: "Minimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.",
            title: "Recommended Practices",
         },
         {
            category: "general",
            text: "Locate control system networks and remote devices behind firewalls and isolate them from business networks.",
            title: "Recommended Practices",
         },
         {
            category: "general",
            text: "When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.",
            title: "Recommended Practices",
         },
         {
            category: "general",
            text: "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
            title: "Recommended Practices",
         },
         {
            category: "general",
            text: "CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
            title: "Recommended Practices",
         },
         {
            category: "general",
            text: "CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
            title: "Recommended Practices",
         },
         {
            category: "general",
            text: "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.",
            title: "Recommended Practices",
         },
      ],
      publisher: {
         category: "other",
         contact_details: "central@cisa.dhs.gov",
         name: "CISA",
         namespace: "https://www.cisa.gov/",
      },
      references: [
         {
            category: "self",
            summary: "SSA-565386: Third-Party Component Vulnerabilities in SCALANCE W-700 IEEE 802.11ax devices before V2.0 - CSAF Version",
            url: "https://cert-portal.siemens.com/productcert/csaf/ssa-565386.json",
         },
         {
            category: "self",
            summary: "SSA-565386: Third-Party Component Vulnerabilities in SCALANCE W-700 IEEE 802.11ax devices before V2.0 - TXT Version",
            url: "https://cert-portal.siemens.com/productcert/txt/ssa-565386.txt",
         },
         {
            category: "self",
            summary: "SSA-565386: Third-Party Component Vulnerabilities in SCALANCE W-700 IEEE 802.11ax devices before V2.0 - PDF Version",
            url: "https://cert-portal.siemens.com/productcert/pdf/ssa-565386.pdf",
         },
         {
            category: "self",
            summary: "ICS Advisory ICSA-23-080-07 JSON",
            url: "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2023/icsa-23-080-07.json",
         },
         {
            category: "self",
            summary: "ICS Advisory ICSA-23-080-07 - Web Version",
            url: "https://www.cisa.gov/news-events/ics-advisories/icsa-23-080-07",
         },
         {
            category: "external",
            summary: "Recommended Practices",
            url: "https://www.cisa.gov/uscert/ics/alerts/ICS-ALERT-10-301-01",
         },
         {
            category: "external",
            summary: "Recommended Practices",
            url: "https://www.cisa.gov/resources-tools/resources/ics-recommended-practices",
         },
         {
            category: "external",
            summary: "Recommended Practices",
            url: "https://www.cisa.gov/topics/industrial-control-systems",
         },
         {
            category: "external",
            summary: "Recommended Practices",
            url: "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf",
         },
         {
            category: "external",
            summary: "Recommended Practices",
            url: "https://www.cisa.gov/sites/default/files/publications/Cybersecurity_Best_Practices_for_Industrial_Control_Systems.pdf",
         },
         {
            category: "external",
            summary: "Recommended Practices",
            url: "https://www.cisa.gov/uscert/ics/tips/ICS-TIP-12-146-01B",
         },
      ],
      title: "Siemens SCALANCE Third-Party",
      tracking: {
         current_release_date: "2023-03-14T00:00:00.000000Z",
         generator: {
            engine: {
               name: "CISA CSAF Generator",
               version: "1.0.0",
            },
         },
         id: "ICSA-23-080-07",
         initial_release_date: "2023-03-14T00:00:00.000000Z",
         revision_history: [
            {
               date: "2023-03-14T00:00:00.000000Z",
               legacy_version: "1.0",
               number: "1",
               summary: "Publication Date",
            },
         ],
         status: "final",
         version: "1",
      },
   },
   product_tree: {
      branches: [
         {
            branches: [
               {
                  branches: [
                     {
                        category: "product_version_range",
                        name: "<V2.0",
                        product: {
                           name: "SCALANCE WAM763-1 (6GK5763-1AL00-7DA0)",
                           product_id: "CSAFPID-0001",
                           product_identification_helper: {
                              model_numbers: [
                                 "6GK5763-1AL00-7DA0",
                              ],
                           },
                        },
                     },
                  ],
                  category: "product_name",
                  name: "SCALANCE WAM763-1 (6GK5763-1AL00-7DA0)",
               },
               {
                  branches: [
                     {
                        category: "product_version_range",
                        name: "<V2.0",
                        product: {
                           name: "SCALANCE WAM766-1 (EU) (6GK5766-1GE00-7DA0)",
                           product_id: "CSAFPID-0002",
                           product_identification_helper: {
                              model_numbers: [
                                 "6GK5766-1GE00-7DA0",
                              ],
                           },
                        },
                     },
                  ],
                  category: "product_name",
                  name: "SCALANCE WAM766-1 (EU) (6GK5766-1GE00-7DA0)",
               },
               {
                  branches: [
                     {
                        category: "product_version_range",
                        name: "<V2.0",
                        product: {
                           name: "SCALANCE WAM766-1 (US) (6GK5766-1GE00-7DB0)",
                           product_id: "CSAFPID-0003",
                           product_identification_helper: {
                              model_numbers: [
                                 "6GK5766-1GE00-7DB0",
                              ],
                           },
                        },
                     },
                  ],
                  category: "product_name",
                  name: "SCALANCE WAM766-1 (US) (6GK5766-1GE00-7DB0)",
               },
               {
                  branches: [
                     {
                        category: "product_version_range",
                        name: "<V2.0",
                        product: {
                           name: "SCALANCE WAM766-1 EEC (EU) (6GK5766-1GE00-7TA0)",
                           product_id: "CSAFPID-0004",
                           product_identification_helper: {
                              model_numbers: [
                                 "6GK5766-1GE00-7TA0",
                              ],
                           },
                        },
                     },
                  ],
                  category: "product_name",
                  name: "SCALANCE WAM766-1 EEC (EU) (6GK5766-1GE00-7TA0)",
               },
               {
                  branches: [
                     {
                        category: "product_version_range",
                        name: "<V2.0",
                        product: {
                           name: "SCALANCE WAM766-1 EEC (US) (6GK5766-1GE00-7TB0)",
                           product_id: "CSAFPID-0005",
                           product_identification_helper: {
                              model_numbers: [
                                 "6GK5766-1GE00-7TB0",
                              ],
                           },
                        },
                     },
                  ],
                  category: "product_name",
                  name: "SCALANCE WAM766-1 EEC (US) (6GK5766-1GE00-7TB0)",
               },
               {
                  branches: [
                     {
                        category: "product_version_range",
                        name: "<V2.0",
                        product: {
                           name: "SCALANCE WUM763-1 (6GK5763-1AL00-3DA0)",
                           product_id: "CSAFPID-0006",
                           product_identification_helper: {
                              model_numbers: [
                                 "6GK5763-1AL00-3DA0",
                              ],
                           },
                        },
                     },
                  ],
                  category: "product_name",
                  name: "SCALANCE WUM763-1 (6GK5763-1AL00-3DA0)",
               },
               {
                  branches: [
                     {
                        category: "product_version_range",
                        name: "<V2.0",
                        product: {
                           name: "SCALANCE WUM763-1 (6GK5763-1AL00-3AA0)",
                           product_id: "CSAFPID-0007",
                           product_identification_helper: {
                              model_numbers: [
                                 "6GK5763-1AL00-3AA0",
                              ],
                           },
                        },
                     },
                  ],
                  category: "product_name",
                  name: "SCALANCE WUM763-1 (6GK5763-1AL00-3AA0)",
               },
               {
                  branches: [
                     {
                        category: "product_version_range",
                        name: "<V2.0",
                        product: {
                           name: "SCALANCE WUM766-1 (EU) (6GK5766-1GE00-3DA0)",
                           product_id: "CSAFPID-0008",
                           product_identification_helper: {
                              model_numbers: [
                                 "6GK5766-1GE00-3DA0",
                              ],
                           },
                        },
                     },
                  ],
                  category: "product_name",
                  name: "SCALANCE WUM766-1 (EU) (6GK5766-1GE00-3DA0)",
               },
               {
                  branches: [
                     {
                        category: "product_version_range",
                        name: "<V2.0",
                        product: {
                           name: "SCALANCE WUM766-1 (US) (6GK5766-1GE00-3DB0)",
                           product_id: "CSAFPID-0009",
                           product_identification_helper: {
                              model_numbers: [
                                 "6GK5766-1GE00-3DB0",
                              ],
                           },
                        },
                     },
                  ],
                  category: "product_name",
                  name: "SCALANCE WUM766-1 (US) (6GK5766-1GE00-3DB0)",
               },
            ],
            category: "vendor",
            name: "Siemens",
         },
      ],
   },
   vulnerabilities: [
      {
         cve: "CVE-2018-12886",
         cwe: {
            id: "CWE-209",
            name: "Generation of Error Message Containing Sensitive Information",
         },
         notes: [
            {
               category: "summary",
               text: "stack_protect_prologue in cfgexpand.c and stack_protect_epilogue in function.c in GNU Compiler Collection (GCC) 4.1 through 8 (under certain circumstances) generate instruction sequences when targeting ARM targets that spill the address of the stack protector guard, which allows an attacker to bypass the protection of -fstack-protector, -fstack-protector-all, -fstack-protector-strong, and -fstack-protector-explicit against stack overflow by controlling what the stack canary is compared against.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
               "CSAFPID-0002",
               "CSAFPID-0003",
               "CSAFPID-0004",
               "CSAFPID-0005",
               "CSAFPID-0007",
               "CSAFPID-0006",
               "CSAFPID-0008",
               "CSAFPID-0009",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V2.0 or later version",
               product_ids: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0007",
                  "CSAFPID-0006",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109815650/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 8.1,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0007",
                  "CSAFPID-0006",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
               ],
            },
         ],
         title: "CVE-2018-12886",
      },
      {
         cve: "CVE-2018-25032",
         cwe: {
            id: "CWE-787",
            name: "Out-of-bounds Write",
         },
         notes: [
            {
               category: "summary",
               text: "zlib before 1.2.12 allows memory corruption when deflating (i.e., when compressing) if the input has many distant matches.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
               "CSAFPID-0002",
               "CSAFPID-0003",
               "CSAFPID-0004",
               "CSAFPID-0005",
               "CSAFPID-0007",
               "CSAFPID-0006",
               "CSAFPID-0008",
               "CSAFPID-0009",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V2.0 or later version",
               product_ids: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0007",
                  "CSAFPID-0006",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109815650/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0007",
                  "CSAFPID-0006",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
               ],
            },
         ],
         title: "CVE-2018-25032",
      },
      {
         cve: "CVE-2021-42373",
         cwe: {
            id: "CWE-476",
            name: "NULL Pointer Dereference",
         },
         notes: [
            {
               category: "summary",
               text: "A NULL pointer dereference in Busybox's man applet leads to denial of service when a section name is supplied but no page argument is given.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
               "CSAFPID-0002",
               "CSAFPID-0003",
               "CSAFPID-0004",
               "CSAFPID-0005",
               "CSAFPID-0007",
               "CSAFPID-0006",
               "CSAFPID-0008",
               "CSAFPID-0009",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V2.0 or later version",
               product_ids: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0007",
                  "CSAFPID-0006",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109815650/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 5.1,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:L/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0007",
                  "CSAFPID-0006",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
               ],
            },
         ],
         title: "CVE-2021-42373",
      },
      {
         cve: "CVE-2021-42374",
         cwe: {
            id: "CWE-125",
            name: "Out-of-bounds Read",
         },
         notes: [
            {
               category: "summary",
               text: "An out-of-bounds heap read in Busybox's unlzma applet leads to information leak and denial of service when crafted LZMA-compressed input is decompressed. This can be triggered by any applet/format that internally supports LZMA compression.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
               "CSAFPID-0002",
               "CSAFPID-0003",
               "CSAFPID-0004",
               "CSAFPID-0005",
               "CSAFPID-0007",
               "CSAFPID-0006",
               "CSAFPID-0008",
               "CSAFPID-0009",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V2.0 or later version",
               product_ids: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0007",
                  "CSAFPID-0006",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109815650/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 6.5,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0007",
                  "CSAFPID-0006",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
               ],
            },
         ],
         title: "CVE-2021-42374",
      },
      {
         cve: "CVE-2021-42375",
         cwe: {
            id: "CWE-20",
            name: "Improper Input Validation",
         },
         notes: [
            {
               category: "summary",
               text: "An incorrect handling of a special element in Busybox's ash applet leads to denial of service when processing a crafted shell command, due to the shell mistaking specific characters for reserved characters. This may be used for DoS under rare conditions of filtered command input.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
               "CSAFPID-0002",
               "CSAFPID-0003",
               "CSAFPID-0004",
               "CSAFPID-0005",
               "CSAFPID-0007",
               "CSAFPID-0006",
               "CSAFPID-0008",
               "CSAFPID-0009",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V2.0 or later version",
               product_ids: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0007",
                  "CSAFPID-0006",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109815650/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 4.1,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0007",
                  "CSAFPID-0006",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
               ],
            },
         ],
         title: "CVE-2021-42375",
      },
      {
         cve: "CVE-2021-42376",
         cwe: {
            id: "CWE-476",
            name: "NULL Pointer Dereference",
         },
         notes: [
            {
               category: "summary",
               text: "A NULL pointer dereference in Busybox's hush applet leads to denial of service when processing a crafted shell command, due to missing validation after a \\x03 delimiter character. This may be used for DoS under very rare conditions of filtered command input.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
               "CSAFPID-0002",
               "CSAFPID-0003",
               "CSAFPID-0004",
               "CSAFPID-0005",
               "CSAFPID-0007",
               "CSAFPID-0006",
               "CSAFPID-0008",
               "CSAFPID-0009",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V2.0 or later version",
               product_ids: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0007",
                  "CSAFPID-0006",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109815650/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 4.1,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0007",
                  "CSAFPID-0006",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
               ],
            },
         ],
         title: "CVE-2021-42376",
      },
      {
         cve: "CVE-2021-42377",
         cwe: {
            id: "CWE-763",
            name: "Release of Invalid Pointer or Reference",
         },
         notes: [
            {
               category: "summary",
               text: "An attacker-controlled pointer free in Busybox's hush applet leads to denial of service and possible code execution when processing a crafted shell command, due to the shell mishandling the &&& string. This may be used for remote code execution under rare conditions of filtered command input.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
               "CSAFPID-0002",
               "CSAFPID-0003",
               "CSAFPID-0004",
               "CSAFPID-0005",
               "CSAFPID-0007",
               "CSAFPID-0006",
               "CSAFPID-0008",
               "CSAFPID-0009",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V2.0 or later version",
               product_ids: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0007",
                  "CSAFPID-0006",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109815650/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 6.4,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0007",
                  "CSAFPID-0006",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
               ],
            },
         ],
         title: "CVE-2021-42377",
      },
      {
         cve: "CVE-2021-42378",
         cwe: {
            id: "CWE-416",
            name: "Use After Free",
         },
         notes: [
            {
               category: "summary",
               text: "A use-after-free in Busybox's awk applet leads to denial of service and possibly code execution when processing a crafted awk pattern in the getvar_i function.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
               "CSAFPID-0002",
               "CSAFPID-0003",
               "CSAFPID-0004",
               "CSAFPID-0005",
               "CSAFPID-0007",
               "CSAFPID-0006",
               "CSAFPID-0008",
               "CSAFPID-0009",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V2.0 or later version",
               product_ids: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0007",
                  "CSAFPID-0006",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109815650/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 6.6,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0007",
                  "CSAFPID-0006",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
               ],
            },
         ],
         title: "CVE-2021-42378",
      },
      {
         cve: "CVE-2021-42379",
         cwe: {
            id: "CWE-416",
            name: "Use After Free",
         },
         notes: [
            {
               category: "summary",
               text: "A use-after-free in Busybox's awk applet leads to denial of service and possibly code execution when processing a crafted awk pattern in the next_input_file function.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
               "CSAFPID-0002",
               "CSAFPID-0003",
               "CSAFPID-0004",
               "CSAFPID-0005",
               "CSAFPID-0007",
               "CSAFPID-0006",
               "CSAFPID-0008",
               "CSAFPID-0009",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V2.0 or later version",
               product_ids: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0007",
                  "CSAFPID-0006",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109815650/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 6.6,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0007",
                  "CSAFPID-0006",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
               ],
            },
         ],
         title: "CVE-2021-42379",
      },
      {
         cve: "CVE-2021-42380",
         cwe: {
            id: "CWE-416",
            name: "Use After Free",
         },
         notes: [
            {
               category: "summary",
               text: "A use-after-free in awk leads to denial of service and possibly code execution when processing a crafted awk pattern in the clrvar function.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
               "CSAFPID-0002",
               "CSAFPID-0003",
               "CSAFPID-0004",
               "CSAFPID-0005",
               "CSAFPID-0007",
               "CSAFPID-0006",
               "CSAFPID-0008",
               "CSAFPID-0009",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V2.0 or later version",
               product_ids: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0007",
                  "CSAFPID-0006",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109815650/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 6.6,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0007",
                  "CSAFPID-0006",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
               ],
            },
         ],
         title: "CVE-2021-42380",
      },
      {
         cve: "CVE-2021-42381",
         cwe: {
            id: "CWE-416",
            name: "Use After Free",
         },
         notes: [
            {
               category: "summary",
               text: "A use-after-free in awk leads to denial of service and possibly code execution when processing a crafted awk pattern in the hash_init function.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
               "CSAFPID-0002",
               "CSAFPID-0003",
               "CSAFPID-0004",
               "CSAFPID-0005",
               "CSAFPID-0007",
               "CSAFPID-0006",
               "CSAFPID-0008",
               "CSAFPID-0009",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V2.0 or later version",
               product_ids: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0007",
                  "CSAFPID-0006",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109815650/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 6.6,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0007",
                  "CSAFPID-0006",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
               ],
            },
         ],
         title: "CVE-2021-42381",
      },
      {
         cve: "CVE-2021-42382",
         cwe: {
            id: "CWE-416",
            name: "Use After Free",
         },
         notes: [
            {
               category: "summary",
               text: "A use-after-free in awk leads to denial of service and possibly code execution when processing a crafted awk pattern in the getvar_s function.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
               "CSAFPID-0002",
               "CSAFPID-0003",
               "CSAFPID-0004",
               "CSAFPID-0005",
               "CSAFPID-0007",
               "CSAFPID-0006",
               "CSAFPID-0008",
               "CSAFPID-0009",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V2.0 or later version",
               product_ids: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0007",
                  "CSAFPID-0006",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109815650/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 6.6,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0007",
                  "CSAFPID-0006",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
               ],
            },
         ],
         title: "CVE-2021-42382",
      },
      {
         cve: "CVE-2021-42383",
         cwe: {
            id: "CWE-416",
            name: "Use After Free",
         },
         notes: [
            {
               category: "summary",
               text: "A use-after-free in awk leads to denial of service and possibly code execution when processing a crafted awk pattern in the evaluate function.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
               "CSAFPID-0002",
               "CSAFPID-0003",
               "CSAFPID-0004",
               "CSAFPID-0005",
               "CSAFPID-0007",
               "CSAFPID-0006",
               "CSAFPID-0008",
               "CSAFPID-0009",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V2.0 or later version",
               product_ids: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0007",
                  "CSAFPID-0006",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109815650/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 6.6,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0007",
                  "CSAFPID-0006",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
               ],
            },
         ],
         title: "CVE-2021-42383",
      },
      {
         cve: "CVE-2021-42384",
         cwe: {
            id: "CWE-416",
            name: "Use After Free",
         },
         notes: [
            {
               category: "summary",
               text: "A use-after-free in Busybox's awk applet leads to denial of service and possibly code execution when processing a crafted awk pattern in the handle_special function.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
               "CSAFPID-0002",
               "CSAFPID-0003",
               "CSAFPID-0004",
               "CSAFPID-0005",
               "CSAFPID-0007",
               "CSAFPID-0006",
               "CSAFPID-0008",
               "CSAFPID-0009",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V2.0 or later version",
               product_ids: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0007",
                  "CSAFPID-0006",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109815650/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 6.6,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0007",
                  "CSAFPID-0006",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
               ],
            },
         ],
         title: "CVE-2021-42384",
      },
      {
         cve: "CVE-2021-42385",
         cwe: {
            id: "CWE-416",
            name: "Use After Free",
         },
         notes: [
            {
               category: "summary",
               text: "A use-after-free in awk leads to denial of service and possibly code execution when processing a crafted awk pattern in the evaluate function.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
               "CSAFPID-0002",
               "CSAFPID-0003",
               "CSAFPID-0004",
               "CSAFPID-0005",
               "CSAFPID-0007",
               "CSAFPID-0006",
               "CSAFPID-0008",
               "CSAFPID-0009",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V2.0 or later version",
               product_ids: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0007",
                  "CSAFPID-0006",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109815650/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 6.6,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0007",
                  "CSAFPID-0006",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
               ],
            },
         ],
         title: "CVE-2021-42385",
      },
      {
         cve: "CVE-2021-42386",
         cwe: {
            id: "CWE-416",
            name: "Use After Free",
         },
         notes: [
            {
               category: "summary",
               text: "A use-after-free in awk leads to denial of service and possibly code execution when processing a crafted awk pattern in the nvalloc function.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
               "CSAFPID-0002",
               "CSAFPID-0003",
               "CSAFPID-0004",
               "CSAFPID-0005",
               "CSAFPID-0007",
               "CSAFPID-0006",
               "CSAFPID-0008",
               "CSAFPID-0009",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V2.0 or later version",
               product_ids: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0007",
                  "CSAFPID-0006",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109815650/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 6.6,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0007",
                  "CSAFPID-0006",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
               ],
            },
         ],
         title: "CVE-2021-42386",
      },
      {
         cve: "CVE-2022-23395",
         cwe: {
            id: "CWE-1321",
            name: "Improperly Controlled Modification of Object Prototype Attributes ('Prototype Pollution')",
         },
         notes: [
            {
               category: "summary",
               text: "jQuery Cookie 1.4.1 is affected by prototype pollution, which can lead to DOM cross-site scripting (XSS).",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
               "CSAFPID-0002",
               "CSAFPID-0003",
               "CSAFPID-0004",
               "CSAFPID-0005",
               "CSAFPID-0007",
               "CSAFPID-0006",
               "CSAFPID-0008",
               "CSAFPID-0009",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V2.0 or later version",
               product_ids: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0007",
                  "CSAFPID-0006",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109815650/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 6.1,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
                  "CSAFPID-0002",
                  "CSAFPID-0003",
                  "CSAFPID-0004",
                  "CSAFPID-0005",
                  "CSAFPID-0007",
                  "CSAFPID-0006",
                  "CSAFPID-0008",
                  "CSAFPID-0009",
               ],
            },
         ],
         title: "CVE-2022-23395",
      },
   ],
}


Log in or create an account to share your comment.

Security Advisory comment format.

This schema specifies the format of a comment related to a security advisory.

UUIDv4 of the comment
UUIDv4 of the Vulnerability-Lookup instance
When the comment was created originally
When the comment was last updated
Title of the comment
Description of the comment
The identifier of the vulnerability (CVE ID, GHSA-ID, PYSEC ID, etc.).



Tags
Taxonomy of the tags.




Sightings

Author Source Type Date

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
  • Confirmed: The vulnerability is confirmed from an analyst perspective.
  • Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
  • Patched: This vulnerability was successfully patched by the user reporting the sighting.
  • Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
  • Not confirmed: The user expresses doubt about the veracity of the vulnerability.
  • Not patched: This vulnerability was not successfully patched by the user reporting the sighting.