cisco-sa-aci-lldp-dos-yscnzopx
Vulnerability from csaf_cisco
Published
2023-02-22 16:00
Modified
2023-02-22 16:00
Summary
Cisco Nexus 9000 Series Fabric Switches in ACI Mode Link Layer Discovery Protocol Memory Leak Denial of Service Vulnerability
Notes
Summary
A vulnerability in the Link Layer Discovery Protocol (LLDP) feature for Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) Mode could allow an unauthenticated, adjacent attacker to cause a memory leak, which could result in an unexpected reload of the device.
This vulnerability is due to incorrect error checking when parsing ingress LLDP packets. An attacker could exploit this vulnerability by sending a steady stream of crafted LLDP packets to an affected device. A successful exploit could allow the attacker to cause a memory leak, which could result in a denial of service (DoS) condition when the device unexpectedly reloads.
Note: This vulnerability cannot be exploited by transit traffic through the device. The crafted LLDP packet must be targeted to a directly connected interface, and the attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). In addition, the attack surface for this vulnerability can be reduced by disabling LLDP on interfaces where it is not required.
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
This advisory is part of the February 2023 Cisco FXOS and NX-OS Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: February 2023 Semiannual Cisco FXOS and NX-OS Software Security Advisory Bundled Publication ["https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-75057"].
Vulnerable Products
This vulnerability affects Cisco Nexus 9000 Series Fabric Switches in ACI Mode if they are running a vulnerable release of Cisco NX-OS Software and have the LLDP feature enabled.
For information about which Cisco software releases are vulnerable, see the Fixed Software ["#fs"] section of this advisory.
Determine Whether LLDP is Enabled
To determine the LLDP status of a Cisco Nexus 9000 Series Fabric Switch in ACI Mode, use the show lldp interface ethernet port/interface command. If the transmit (tx) and receive (rx) statuses are Y, LLDP is enabled on the interface, as in the following example:
#show lldp interface ethernet port/interface
Interface Information:Enable (tx/rx/dcbx): Y/Y/N Port Mac address: 00:fe:c8:09:e2:92
Products Confirmed Not Vulnerable
Only products listed in the Vulnerable Products ["#vp"] section of this advisory are known to be affected by this vulnerability.
Cisco has confirmed that this vulnerability does not affect the following Cisco products:
Firepower 1000 Series
Firepower 2100 Series
Firepower 4100 Series
Firepower 9300 Security Appliances
MDS 9000 Series Multilayer Switches
Nexus 1000 Virtual Edge for VMware vSphere
Nexus 1000V Switch for Microsoft Hyper-V
Nexus 1000V Switch for VMware vSphere
Nexus 3000 Series Switches
Nexus 5500 Platform Switches
Nexus 5600 Platform Switches
Nexus 6000 Series Switches
Nexus 7000 Series Switches
Nexus 9000 Series Switches in standalone NX-OS mode
Secure Firewall 3100 Series
UCS 6200 Series Fabric Interconnects
UCS 6300 Series Fabric Interconnects
UCS 6400 Series Fabric Interconnects
UCS 6500 Series Fabric Interconnects
Indicators of Compromise
An exploit of this vulnerability can result in a memory leak in the LLDP process, which could cause a crash of the device once there is insufficient system memory available.
To monitor memory usage of the LLDP process, use the ps aux --sort -rss CLI command or the ps aux --sort -rss | grep lldp CLI command. In the output, the VSZ column indicates the total amount of memory in use by the LLDP process. If this number slowly increases over time and never decreases, this could be an indication that this vulnerability is being exploited. A device reboot is required to reclaim the memory.
leaf# ps aux --sort -rss
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 24764 2.1 3.3 2454992 544656 ? Ssl Jan29 3772:19 /isan/bin/coop
root 24769 0.8 2.8 2150308 458840 ? Ssl Jan29 1497:31 /isan/bin/routing-sw/isis -t isis_infra
root 22160 0.0 2.8 1966352 454464 ? Ssl Jan29 71:52 /isan/bin/nfm
root 56391 0.0 2.7 1963948 451276 ? Ss Jan29 5:49 /isan/bin/cts -t
root 24763 0.0 2.4 1918348 394152 ? Ssl Jan29 6:27 /isan/bin/dhcp_snoop
root 22222 0.0 2.3 1111704 379436 ? Ssl Jan29 67:56 /isan/bin/acllog
root 24754 0.0 2.3 1895068 378796 ? Ss Jan29 52:41 /isan/bin/oam
root 24757 0.0 2.3 4190440 376808 ? Ss Jan29 134:20 /isan/bin/lldp
leaf#ps aux --sort -rss | grep lldp
root 24757 0.0 2.3 4190440 376808 ? Ss Jan29 134:20 /isan/bin/lldp
Workarounds
There are no workarounds that address this vulnerability.
However, if LLDP is not enabled on an interface, this vulnerability cannot be exploited on that interface. As a mitigation, disable LLDP on all interfaces where it is not required. Use the CLI commands no lldp transmit and no lldp receive. For additional information, see Cisco APIC Layer 2 Networking Configuration Guide ["https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/L2_config/b_Cisco_APIC_Layer_2_Configuration_Guide/b_Cisco_APIC_Layer_2_Configuration_Guide_chapter_0100.html"].
While this mitigation has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Fixed Software
Cisco has released free software updates ["https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#ssu"] that address the vulnerability described in this advisory. Customers with service contracts that entitle them to regular software updates should obtain security fixes through their usual update channels.
Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license:
https://www.cisco.com/c/en/us/products/end-user-license-agreement.html ["https://www.cisco.com/c/en/us/products/end-user-license-agreement.html"]
Additionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.
The Cisco Support and Downloads page ["https://www.cisco.com/c/en/us/support/index.html"] on Cisco.com provides information about licensing and downloads. This page can also display customer device support coverage for customers who use the My Devices tool.
When considering software upgrades ["https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes"], customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page ["https://www.cisco.com/go/psirt"], to determine exposure and a complete upgrade solution.
In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.
Customers Without Service Contracts
Customers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC: https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html ["https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html"]
Customers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.
Cisco NX-OS Software
To help customers determine their exposure to vulnerabilities in Cisco NX-OS Software, Cisco provides the Cisco Software Checker ["https://sec.cloudapps.cisco.com/security/center/softwarechecker.x"]. This tool identifies any Cisco security advisories that impact a specific software release and the earliest release that fixes the vulnerabilities that are described in each advisory (“First Fixed”). If applicable, the tool also returns the earliest release that fixes all the vulnerabilities described in all the advisories that the Software Checker identifies (“Combined First Fixed”).
To use the tool, go to the Cisco Software Checker ["https://sec.cloudapps.cisco.com/security/center/softwarechecker.x"] page and follow the instructions. Alternatively, use the following form to search for vulnerabilities that affect a specific software release. To use the form, follow these steps:
Choose which advisories the tool will search—only this advisory, only advisories with a Critical or High Security Impact Rating (SIR) ["https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#asr"], or all advisories.
Choose the appropriate software.
Choose the appropriate platform.
Enter a release number—for example, 7.0(3)I7(5) for Cisco Nexus 3000 Series Switches or 14.0(1h) for Cisco NX-OS Software in ACI mode.
Click Check.
Only this advisory All Critical and High advisories All advisories Cisco NX-OS Software Cisco NX-OS Software in ACI Mode Any Platform MDS 9000 Series Multilayer Switches Nexus 1000V Series Switches Nexus 3000 Series Switches Nexus 5000 Series Switches Nexus 6000 Series Switches Nexus 7000 Series Switches Nexus 9000 Series Switches
Additional Resources
For help determining the best Cisco NX-OS Software release for a Cisco Nexus Switch, see the following Recommended Releases documents. If a security advisory recommends a later release, Cisco recommends following the advisory guidance.
Cisco MDS Series Switches ["https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/b_MDS_NX-OS_Recommended_Releases.html"]
Cisco Nexus 1000V for VMware Switch ["http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/recommended_releases/b_Cisco_N1KV_VMware_MinRecommendedReleases.html"]
Cisco Nexus 3000 Series Switches ["http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/recommended_release/b_Minimum_and_Recommended_Cisco_NX-OS_Releases_for_Cisco_Nexus_3000_Series_Switches.html"]
Cisco Nexus 5500 Platform Switches ["http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5500/sw/release/recommended_releases/n5500_recommended_nx-os_releases.html"]
Cisco Nexus 5600 Platform Switches ["https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5600/sw/release/recommended_releases/n5600_recommended_nx-os_releases.html"]
Cisco Nexus 6000 Series Switches ["http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus6000/sw/release/recommended_releases/recommended_nx-os_releases.html"]
Cisco Nexus 7000 Series Switches ["http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/recommended_releases/recommended_nx-os_releases.html"]
Cisco Nexus 9000 Series Switches ["http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/recommended_release/b_Minimum_and_Recommended_Cisco_NX-OS_Releases_for_Cisco_Nexus_9000_Series_Switches.html"]
Cisco Nexus 9000 Series ACI-Mode Switches ["https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/recommended-release/b_Recommended_Cisco_ACI_Releases.html"]
To determine the best release for Cisco UCS Software, see the Recommended Releases documents in the release notes for the device.
Vulnerability Policy
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy ["http://www.cisco.com/web/about/security/psirt/security_vulnerability_policy.html"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
Exploitation and Public Announcements
The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.
Source
This vulnerability was found during the resolution of a Cisco TAC support case.
Legal Disclaimer
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.
{ "document": { "acknowledgments": [ { "summary": "This vulnerability was found during the resolution of a Cisco TAC support case." } ], "category": "csaf_security_advisory", "csaf_version": "2.0", "notes": [ { "category": "summary", "text": "A vulnerability in the Link Layer Discovery Protocol (LLDP) feature for Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) Mode could allow an unauthenticated, adjacent attacker to cause a memory leak, which could result in an unexpected reload of the device.\r\n\r\nThis vulnerability is due to incorrect error checking when parsing ingress LLDP packets. An attacker could exploit this vulnerability by sending a steady stream of crafted LLDP packets to an affected device. A successful exploit could allow the attacker to cause a memory leak, which could result in a denial of service (DoS) condition when the device unexpectedly reloads.\r\n\r\nNote: This vulnerability cannot be exploited by transit traffic through the device. The crafted LLDP packet must be targeted to a directly connected interface, and the attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). In addition, the attack surface for this vulnerability can be reduced by disabling LLDP on interfaces where it is not required.\r\n\r\nCisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.\r\n\r\n\r\n\r\nThis advisory is part of the February 2023 Cisco FXOS and NX-OS Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: February 2023 Semiannual Cisco FXOS and NX-OS Software Security Advisory Bundled Publication [\"https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-75057\"].", "title": "Summary" }, { "category": "general", "text": "This vulnerability affects Cisco Nexus 9000 Series Fabric Switches in ACI Mode if they are running a vulnerable release of Cisco NX-OS Software and have the LLDP feature enabled.\r\n\r\nFor information about which Cisco software releases are vulnerable, see the Fixed Software [\"#fs\"] section of this advisory.\r\n Determine Whether LLDP is Enabled\r\nTo determine the LLDP status of a Cisco Nexus 9000 Series Fabric Switch in ACI Mode, use the show lldp interface ethernet port/interface command. If the transmit (tx) and receive (rx) statuses are Y, LLDP is enabled on the interface, as in the following example:\r\n\r\n\r\n#show lldp interface ethernet port/interface\r\nInterface Information:Enable (tx/rx/dcbx): Y/Y/N Port Mac address: 00:fe:c8:09:e2:92", "title": "Vulnerable Products" }, { "category": "general", "text": "Only products listed in the Vulnerable Products [\"#vp\"] section of this advisory are known to be affected by this vulnerability.\r\n\r\nCisco has confirmed that this vulnerability does not affect the following Cisco products:\r\n\r\nFirepower 1000 Series\r\nFirepower 2100 Series\r\nFirepower 4100 Series\r\nFirepower 9300 Security Appliances\r\nMDS 9000 Series Multilayer Switches\r\nNexus 1000 Virtual Edge for VMware vSphere\r\nNexus 1000V Switch for Microsoft Hyper-V\r\nNexus 1000V Switch for VMware vSphere\r\nNexus 3000 Series Switches\r\nNexus 5500 Platform Switches\r\nNexus 5600 Platform Switches\r\nNexus 6000 Series Switches\r\nNexus 7000 Series Switches\r\nNexus 9000 Series Switches in standalone NX-OS mode\r\nSecure Firewall 3100 Series\r\nUCS 6200 Series Fabric Interconnects\r\nUCS 6300 Series Fabric Interconnects\r\nUCS 6400 Series Fabric Interconnects\r\nUCS 6500 Series Fabric Interconnects", "title": "Products Confirmed Not Vulnerable" }, { "category": "general", "text": "An exploit of this vulnerability can result in a memory leak in the LLDP process, which could cause a crash of the device once there is insufficient system memory available.\r\n\r\nTo monitor memory usage of the LLDP process, use the ps aux --sort -rss CLI command or the ps aux --sort -rss | grep lldp CLI command. In the output, the VSZ column indicates the total amount of memory in use by the LLDP process. If this number slowly increases over time and never decreases, this could be an indication that this vulnerability is being exploited. A device reboot is required to reclaim the memory.\r\n\r\n\r\nleaf# ps aux --sort -rss\r\nUSER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND\r\nroot 24764 2.1 3.3 2454992 544656 ? Ssl Jan29 3772:19 /isan/bin/coop\r\nroot 24769 0.8 2.8 2150308 458840 ? Ssl Jan29 1497:31 /isan/bin/routing-sw/isis -t isis_infra\r\nroot 22160 0.0 2.8 1966352 454464 ? Ssl Jan29 71:52 /isan/bin/nfm\r\nroot 56391 0.0 2.7 1963948 451276 ? Ss Jan29 5:49 /isan/bin/cts -t\r\nroot 24763 0.0 2.4 1918348 394152 ? Ssl Jan29 6:27 /isan/bin/dhcp_snoop\r\nroot 22222 0.0 2.3 1111704 379436 ? Ssl Jan29 67:56 /isan/bin/acllog\r\nroot 24754 0.0 2.3 1895068 378796 ? Ss Jan29 52:41 /isan/bin/oam\r\nroot 24757 0.0 2.3 4190440 376808 ? Ss Jan29 134:20 /isan/bin/lldp\r\n\r\nleaf#ps aux --sort -rss | grep lldp\r\nroot 24757 0.0 2.3 4190440 376808 ? Ss Jan29 134:20 /isan/bin/lldp", "title": "Indicators of Compromise" }, { "category": "general", "text": "There are no workarounds that address this vulnerability.\r\n\r\nHowever, if LLDP is not enabled on an interface, this vulnerability cannot be exploited on that interface. As a mitigation, disable LLDP on all interfaces where it is not required. Use the CLI commands no lldp transmit and no lldp receive. For additional information, see Cisco APIC Layer 2 Networking Configuration Guide [\"https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/L2_config/b_Cisco_APIC_Layer_2_Configuration_Guide/b_Cisco_APIC_Layer_2_Configuration_Guide_chapter_0100.html\"].\r\n While this mitigation has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.", "title": "Workarounds" }, { "category": "general", "text": "Cisco has released free software updates [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#ssu\"] that address the vulnerability described in this advisory. Customers with service contracts that entitle them to regular software updates should obtain security fixes through their usual update channels.\r\n\r\nCustomers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license:\r\nhttps://www.cisco.com/c/en/us/products/end-user-license-agreement.html [\"https://www.cisco.com/c/en/us/products/end-user-license-agreement.html\"]\r\n\r\nAdditionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.\r\n\r\nThe Cisco Support and Downloads page [\"https://www.cisco.com/c/en/us/support/index.html\"] on Cisco.com provides information about licensing and downloads. This page can also display customer device support coverage for customers who use the My Devices tool.\r\n\r\nWhen considering software upgrades [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes\"], customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page [\"https://www.cisco.com/go/psirt\"], to determine exposure and a complete upgrade solution.\r\n\r\nIn all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.\r\n Customers Without Service Contracts\r\nCustomers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC: https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html [\"https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html\"]\r\n\r\nCustomers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.\r\n Cisco NX-OS Software\r\nTo help customers determine their exposure to vulnerabilities in Cisco NX-OS Software, Cisco provides the Cisco Software Checker [\"https://sec.cloudapps.cisco.com/security/center/softwarechecker.x\"]. This tool identifies any Cisco security advisories that impact a specific software release and the earliest release that fixes the vulnerabilities that are described in each advisory (\u201cFirst Fixed\u201d). If applicable, the tool also returns the earliest release that fixes all the vulnerabilities described in all the advisories that the Software Checker identifies (\u201cCombined First Fixed\u201d).\r\n\r\nTo use the tool, go to the Cisco Software Checker [\"https://sec.cloudapps.cisco.com/security/center/softwarechecker.x\"] page and follow the instructions. Alternatively, use the following form to search for vulnerabilities that affect a specific software release. To use the form, follow these steps:\r\n\r\nChoose which advisories the tool will search\u2014only this advisory, only advisories with a Critical or High Security Impact Rating (SIR) [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#asr\"], or all advisories.\r\nChoose the appropriate software.\r\nChoose the appropriate platform.\r\nEnter a release number\u2014for example, 7.0(3)I7(5) for Cisco Nexus 3000 Series Switches or 14.0(1h) for Cisco NX-OS Software in ACI mode.\r\nClick Check.\r\n\r\n Only this advisory All Critical and High advisories All advisories Cisco NX-OS Software Cisco NX-OS Software in ACI Mode Any Platform MDS 9000 Series Multilayer Switches Nexus 1000V Series Switches Nexus 3000 Series Switches Nexus 5000 Series Switches Nexus 6000 Series Switches Nexus 7000 Series Switches Nexus 9000 Series Switches\r\n\r\n\r\n\r\n\r\n Additional Resources\r\nFor help determining the best Cisco NX-OS Software release for a Cisco Nexus Switch, see the following Recommended Releases documents. If a security advisory recommends a later release, Cisco recommends following the advisory guidance.\r\n\r\n\r\nCisco MDS Series Switches [\"https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/b_MDS_NX-OS_Recommended_Releases.html\"]\r\nCisco Nexus 1000V for VMware Switch [\"http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/recommended_releases/b_Cisco_N1KV_VMware_MinRecommendedReleases.html\"]\r\nCisco Nexus 3000 Series Switches [\"http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/recommended_release/b_Minimum_and_Recommended_Cisco_NX-OS_Releases_for_Cisco_Nexus_3000_Series_Switches.html\"]\r\nCisco Nexus 5500 Platform Switches [\"http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5500/sw/release/recommended_releases/n5500_recommended_nx-os_releases.html\"]\r\nCisco Nexus 5600 Platform Switches [\"https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5600/sw/release/recommended_releases/n5600_recommended_nx-os_releases.html\"]\r\nCisco Nexus 6000 Series Switches [\"http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus6000/sw/release/recommended_releases/recommended_nx-os_releases.html\"]\r\nCisco Nexus 7000 Series Switches [\"http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/recommended_releases/recommended_nx-os_releases.html\"]\r\nCisco Nexus 9000 Series Switches [\"http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/recommended_release/b_Minimum_and_Recommended_Cisco_NX-OS_Releases_for_Cisco_Nexus_9000_Series_Switches.html\"]\r\nCisco Nexus 9000 Series ACI-Mode Switches [\"https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/recommended-release/b_Recommended_Cisco_ACI_Releases.html\"]\r\n\r\nTo determine the best release for Cisco UCS Software, see the Recommended Releases documents in the release notes for the device.", "title": "Fixed Software" }, { "category": "general", "text": "To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy [\"http://www.cisco.com/web/about/security/psirt/security_vulnerability_policy.html\"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.", "title": "Vulnerability Policy" }, { "category": "general", "text": "The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.", "title": "Exploitation and Public Announcements" }, { "category": "general", "text": "This vulnerability was found during the resolution of a Cisco TAC support case.", "title": "Source" }, { "category": "legal_disclaimer", "text": "THIS DOCUMENT IS PROVIDED ON AN \"AS IS\" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.\r\n\r\nA standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.", "title": "Legal Disclaimer" } ], "publisher": { "category": "vendor", "contact_details": "Emergency Support:\r\n+1 877 228 7302 (toll-free within North America)\r\n+1 408 525 6532 (International direct-dial)\r\nNon-emergency Support:\r\nEmail: psirt@cisco.com\r\nSupport requests that are received via e-mail are typically acknowledged within 48 hours.", "issuing_authority": "Cisco product security incident response is the responsibility of the Cisco Product Security Incident Response Team (PSIRT). The Cisco PSIRT is a dedicated, global team that manages the receipt, investigation, and public reporting of security vulnerability information that is related to Cisco products and networks. The on-call Cisco PSIRT works 24x7 with Cisco customers, independent security researchers, consultants, industry organizations, and other vendors to identify possible security issues with Cisco products and networks.\r\nMore information can be found in Cisco Security Vulnerability Policy available at https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html", "name": "Cisco", "namespace": "https://wwww.cisco.com" }, "references": [ { "category": "self", "summary": "Cisco Nexus 9000 Series Fabric Switches in ACI Mode Link Layer Discovery Protocol Memory Leak Denial of Service Vulnerability", "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-aci-lldp-dos-ySCNZOpX" }, { "category": "external", "summary": "Cisco Event Response: February 2023 Semiannual Cisco FXOS and NX-OS Software Security Advisory Bundled Publication", "url": "https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-75057" }, { "category": "external", "summary": "Cisco Security Vulnerability Policy", "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html" }, { "category": "external", "summary": "Cisco APIC Layer 2 Networking Configuration Guide", "url": "https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/L2_config/b_Cisco_APIC_Layer_2_Configuration_Guide/b_Cisco_APIC_Layer_2_Configuration_Guide_chapter_0100.html" }, { "category": "external", "summary": "free software updates", "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#ssu" }, { "category": "external", "summary": "https://www.cisco.com/c/en/us/products/end-user-license-agreement.html", "url": "https://www.cisco.com/c/en/us/products/end-user-license-agreement.html" }, { "category": "external", "summary": "Cisco Support and Downloads page", "url": "https://www.cisco.com/c/en/us/support/index.html" }, { "category": "external", "summary": "considering software upgrades", "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes" }, { "category": "external", "summary": "Cisco Security Advisories page", "url": "https://www.cisco.com/go/psirt" }, { "category": "external", "summary": "https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html", "url": "https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html" }, { "category": "external", "summary": "Cisco Software Checker", "url": "https://sec.cloudapps.cisco.com/security/center/softwarechecker.x" }, { "category": "external", "summary": "Security Impact Rating (SIR)", "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#asr" }, { "category": "external", "summary": "Cisco MDS Series Switches", "url": "https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/b_MDS_NX-OS_Recommended_Releases.html" }, { "category": "external", "summary": "Cisco Nexus 1000V for VMware Switch", "url": "http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/recommended_releases/b_Cisco_N1KV_VMware_MinRecommendedReleases.html" }, { "category": "external", "summary": "Cisco Nexus 3000 Series Switches", "url": "http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/recommended_release/b_Minimum_and_Recommended_Cisco_NX-OS_Releases_for_Cisco_Nexus_3000_Series_Switches.html" }, { "category": "external", "summary": "Cisco Nexus 5500 Platform Switches", "url": "http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5500/sw/release/recommended_releases/n5500_recommended_nx-os_releases.html" }, { "category": "external", "summary": "Cisco Nexus 5600 Platform Switches", "url": "https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5600/sw/release/recommended_releases/n5600_recommended_nx-os_releases.html" }, { "category": "external", "summary": "Cisco Nexus 6000 Series Switches", "url": "http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus6000/sw/release/recommended_releases/recommended_nx-os_releases.html" }, { "category": "external", "summary": "Cisco Nexus 7000 Series Switches", "url": "http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/recommended_releases/recommended_nx-os_releases.html" }, { "category": "external", "summary": "Cisco Nexus 9000 Series Switches", "url": "http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/recommended_release/b_Minimum_and_Recommended_Cisco_NX-OS_Releases_for_Cisco_Nexus_9000_Series_Switches.html" }, { "category": "external", "summary": "Cisco Nexus 9000 Series ACI-Mode Switches", "url": "https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/recommended-release/b_Recommended_Cisco_ACI_Releases.html" }, { "category": "external", "summary": "Security Vulnerability Policy", "url": "http://www.cisco.com/web/about/security/psirt/security_vulnerability_policy.html" } ], "title": "Cisco Nexus 9000 Series Fabric Switches in ACI Mode Link Layer Discovery Protocol Memory Leak Denial of Service Vulnerability", "tracking": { "current_release_date": "2023-02-22T16:00:00+00:00", "generator": { "date": "2023-02-22T15:50:45+00:00", "engine": { "name": "TVCE" } }, "id": "cisco-sa-aci-lldp-dos-ySCNZOpX", "initial_release_date": "2023-02-22T16:00:00+00:00", "revision_history": [ { "date": "2023-02-22T15:50:33+00:00", "number": "1.0.0", "summary": "Initial public release." } ], "status": "final", "version": "1.0.0" } }, "product_tree": { "branches": [ { "branches": [ { "branches": [ { "branches": [ { "category": "service_pack", "name": "15.2(1g)", "product": { "name": "15.2(1g)", "product_id": "CSAFPID-283749" } }, { "category": "service_pack", "name": "15.2(2e)", "product": { "name": "15.2(2e)", "product_id": "CSAFPID-284173" } }, { "category": "service_pack", "name": "15.2(2f)", "product": { "name": "15.2(2f)", "product_id": "CSAFPID-284339" } }, { "category": "service_pack", "name": "15.2(2g)", "product": { "name": "15.2(2g)", "product_id": "CSAFPID-284720" } }, { "category": "service_pack", "name": "15.2(2h)", "product": { "name": "15.2(2h)", "product_id": "CSAFPID-284792" } }, { "category": "service_pack", "name": "15.2(3e)", "product": { "name": "15.2(3e)", "product_id": "CSAFPID-285918" } }, { "category": "service_pack", "name": "15.2(3f)", "product": { "name": "15.2(3f)", "product_id": "CSAFPID-285926" } }, { "category": "service_pack", "name": "15.2(3g)", "product": { "name": "15.2(3g)", "product_id": "CSAFPID-286113" } }, { "category": "service_pack", "name": "15.2(4d)", "product": { "name": "15.2(4d)", "product_id": "CSAFPID-286487" } }, { "category": "service_pack", "name": "15.2(4e)", "product": { "name": "15.2(4e)", "product_id": "CSAFPID-286555" } }, { "category": "service_pack", "name": "15.2(5c)", "product": { "name": "15.2(5c)", "product_id": "CSAFPID-286879" } }, { "category": "service_pack", "name": "15.2(5d)", "product": { "name": "15.2(5d)", "product_id": "CSAFPID-287186" } }, { "category": "service_pack", "name": "15.2(5e)", "product": { "name": "15.2(5e)", "product_id": "CSAFPID-288243" } }, { "category": "service_pack", "name": "15.2(4f)", "product": { "name": "15.2(4f)", "product_id": "CSAFPID-289276" } } ], "category": "product_version", "name": "15.2" }, { "branches": [ { "category": "service_pack", "name": "16.0(1g)", "product": { "name": "16.0(1g)", "product_id": "CSAFPID-288206" } }, { "category": "service_pack", "name": "16.0(1j)", "product": { "name": "16.0(1j)", "product_id": "CSAFPID-290585" } } ], "category": "product_version", "name": "16.0" } ], "category": "product_family", "name": "Cisco NX-OS System Software in ACI Mode" }, { "category": "product_family", "name": "Cisco NX-OS System Software in ACI Mode", "product": { "name": "Cisco NX-OS System Software in ACI Mode ", "product_id": "CSAFPID-241202" } }, { "category": "product_name", "name": "Cisco Nexus 9000 Series Switches", "product": { "name": "Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-265096" } } ], "category": "vendor", "name": "Cisco" } ], "relationships": [ { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS System Software in ACI Mode 15.2(1g) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-283749:265096" }, "product_reference": "CSAFPID-283749", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS System Software in ACI Mode 15.2(2e) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-284173:265096" }, "product_reference": "CSAFPID-284173", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS System Software in ACI Mode 15.2(2f) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-284339:265096" }, "product_reference": "CSAFPID-284339", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS System Software in ACI Mode 15.2(2g) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-284720:265096" }, "product_reference": "CSAFPID-284720", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS System Software in ACI Mode 15.2(2h) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-284792:265096" }, "product_reference": "CSAFPID-284792", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS System Software in ACI Mode 15.2(3e) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-285918:265096" }, "product_reference": "CSAFPID-285918", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS System Software in ACI Mode 15.2(3f) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-285926:265096" }, "product_reference": "CSAFPID-285926", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS System Software in ACI Mode 15.2(3g) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-286113:265096" }, "product_reference": "CSAFPID-286113", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS System Software in ACI Mode 15.2(4d) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-286487:265096" }, "product_reference": "CSAFPID-286487", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS System Software in ACI Mode 15.2(4e) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-286555:265096" }, "product_reference": "CSAFPID-286555", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS System Software in ACI Mode 15.2(5c) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-286879:265096" }, "product_reference": "CSAFPID-286879", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS System Software in ACI Mode 15.2(5d) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-287186:265096" }, "product_reference": "CSAFPID-287186", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS System Software in ACI Mode 15.2(5e) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-288243:265096" }, "product_reference": "CSAFPID-288243", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS System Software in ACI Mode 15.2(4f) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-289276:265096" }, "product_reference": "CSAFPID-289276", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS System Software in ACI Mode 16.0(1g) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-288206:265096" }, "product_reference": "CSAFPID-288206", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS System Software in ACI Mode 16.0(1j) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-290585:265096" }, "product_reference": "CSAFPID-290585", "relates_to_product_reference": "CSAFPID-265096" } ] }, "vulnerabilities": [ { "cve": "CVE-2023-20089", "ids": [ { "system_name": "Cisco Bug ID", "text": "CSCwc23246" } ], "notes": [ { "category": "other", "text": "Complete.", "title": "Affected Product Comprehensiveness" } ], "product_status": { "known_affected": [ "CSAFPID-241202", "CSAFPID-283749:265096", "CSAFPID-284173:265096", "CSAFPID-284339:265096", "CSAFPID-284720:265096", "CSAFPID-284792:265096", "CSAFPID-285918:265096", "CSAFPID-285926:265096", "CSAFPID-286113:265096", "CSAFPID-286487:265096", "CSAFPID-286555:265096", "CSAFPID-286879:265096", "CSAFPID-287186:265096", "CSAFPID-288206:265096", "CSAFPID-288243:265096", "CSAFPID-289276:265096", "CSAFPID-290585:265096" ] }, "release_date": "2023-02-22T16:00:00+00:00", "remediations": [ { "category": "vendor_fix", "details": "Cisco has released software updates that address this vulnerability.", "product_ids": [ "CSAFPID-241202", "CSAFPID-283749:265096", "CSAFPID-284173:265096", "CSAFPID-284339:265096", "CSAFPID-284720:265096", "CSAFPID-284792:265096", "CSAFPID-285918:265096", "CSAFPID-285926:265096", "CSAFPID-286113:265096", "CSAFPID-286487:265096", "CSAFPID-286555:265096", "CSAFPID-286879:265096", "CSAFPID-287186:265096", "CSAFPID-288206:265096", "CSAFPID-288243:265096", "CSAFPID-289276:265096", "CSAFPID-290585:265096" ], "url": "https://software.cisco.com" } ], "scores": [ { "cvss_v3": { "baseScore": 7.4, "baseSeverity": "HIGH", "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:H", "version": "3.1" }, "products": [ "CSAFPID-241202", "CSAFPID-283749:265096", "CSAFPID-284173:265096", "CSAFPID-284339:265096", "CSAFPID-284720:265096", "CSAFPID-284792:265096", "CSAFPID-285918:265096", "CSAFPID-285926:265096", "CSAFPID-286113:265096", "CSAFPID-286487:265096", "CSAFPID-286555:265096", "CSAFPID-286879:265096", "CSAFPID-287186:265096", "CSAFPID-288206:265096", "CSAFPID-288243:265096", "CSAFPID-289276:265096", "CSAFPID-290585:265096" ] } ], "title": "Cisco Nexus 9000 Series Fabric Switches Application Centric Infrastructure Mode Link Layer Discovery Protocol Memory Leak Denial of Service Vulnerability" } ] }
Loading...
Loading...
Sightings
Author | Source | Type | Date |
---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
- Confirmed: The vulnerability is confirmed from an analyst perspective.
- Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
- Patched: This vulnerability was successfully patched by the user reporting the sighting.
- Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
- Not confirmed: The user expresses doubt about the veracity of the vulnerability.
- Not patched: This vulnerability was not successfully patched by the user reporting the sighting.